Quantitative Trait Loci For Plant Height Research Articles

A MYB transcription factor underlying plant height in sorghum qHT7.1 and maize Brachytic 1 loci.

Manipulating plant height is an essential component of crop improvement. Plant height was generally reduced through breeding in wheat, rice, and sorghum to resist lodging and increase grain yield but kept high for bioenergy crops. Here, we positionally cloned a plant height quantitative trait locus (QTL) qHT7.1 as a MYB transcription factor controlling internode elongation, cell proliferation, and cell morphology in sorghum. A 740 bp transposable element insertion in the intronic region caused a partial mis-splicing event, generating a novel transcript that included an additional exon and a premature stop codon, leading to short plant height. The dominant allele had an overall higher expression than the recessive allele across development and internode position, while both alleles' expressions peaked at 46 days after planting and progressively decreased from the top to lower internodes. The orthologue of qHT7.1 was identified to underlie the brachytic1 (br1) locus in maize. A large insertion in exon 3 and a 160 bp insertion at the promoter region were identified in the br1 mutant, while an 18 bp promoter insertion was found to be associated with reduced plant height in a natural recessive allele. CRISPR/Cas9-induced gene knockout of br1 in two maize inbred lines showed significant plant height reduction. These findings revealed functional connections across natural, mutant, and edited alleles of this MYB transcription factor in sorghum and maize. This enriched our understanding of plant height regulation and enhanced our toolbox for fine-tuning plant height for crop improvement.

QTL mapping of maize plant height based on a population of doubled haploid lines using UAV LiDAR high-throughput phenotyping data

Maize (Zea mays L.) is a globally significant crop that plays a crucial role in feeding the growing global population. Among its various traits, plant height is particularly important as it affects yield, lodging resistance, ecological adaptability, and other important factors. Traditional methods for measuring plant height often lack cost-efficiency and accuracy. In this study, we employed a light detection and ranging (LiDAR) sensor mounted on an unmanned aerial vehicle (UAV) to collect point cloud data from 270 doubled haploid (DH) lines. This innovative application of UAV-based LiDAR technology was explored for high-throughput phenotyping in maize breeding. We constructed high-density genetic maps and assessed plant height at both single-plant and row scales across multiple developmental stages and genetic backgrounds. Our findings revealed that for many varieties and small areas, single-plant-scale estimation accuracy was superior to row-scale estimation, with an R2 of 0.67 versus 0.56 and an RMSE of 0.12 m vs. 0.17 m, respectively. Two high-density genetic maps were constructed based on SNP markers. In Sanya and Xinxiang, the F1DH and F2DH populations identified 12 and 20 QTLs (quantitative trait loci) for plant height, respectively. The study successfully identified and validated QTLs associated with plant height, revealing novel genetic loci and candidate genes. This research highlights the potential of UAV-based remote sensing to advance precision agriculture by enabling efficient, large-scale phenotyping and gene discovery in maize breeding programs.

Quantitative Trait Locus Mapping for Plant Height and Branch Number in CCRI70 Recombinant Inbred Line Population of Upland Cotton (Gossypium hirsutum).

Upland cotton accounts for a high percentage (95%) of the world's cotton production. Plant height (PH) and branch number (BN) are two important agronomic traits that have an impact on improving the level of cotton mechanical harvesting and cotton yield. In this research, a recombinant inbred line (RIL) population with 250 lines developed from the variety CCRI70 was used for constructing a high-density genetic map and identification of quantitative trait locus (QTL). The results showed that the map harbored 8298 single nucleotide polymorphism (SNP) markers, spanning a total distance of 4876.70 centimorgans (cMs). A total of 69 QTLs for PH (9 stable) and 63 for BN (11 stable) were identified and only one for PH was reported in previous studies. The QTLs for PH and BN harbored 495 and 446 genes, respectively. Combining the annotation information, expression patterns and previous studies of these genes, six genes could be considered as potential candidate genes for PH and BN. The results could be helpful for cotton researchers to better understand the genetic mechanism of PH and BN development, as well as provide valuable genetic resources for cotton breeders to manipulate cotton plant architecture to meet future demands.

Cloning and functional mechanism of the dwarf gene gba affecting stem elongation and cellulose biosynthesis in jute (Corchorus olitorius).

Plant height (PH) is an important factor affecting bast fiber yield in jute. Here, we report the mechanism of dwarfism in the 'Guangbaai' (gba) of jute. The mutant gba had shorter internode length and cell length compared to the standard cultivar 'TaiZi 4' (TZ4). Exogenous GA3 treatment indicated that gba is a GA-insensitive dwarf mutant. Quantitative trait locus (QTL) analysis of three PH-related traits via a high-density genetic linkage map according to re-seq showed that a total of 25 QTLs were identified, including 13 QTLs for PH, with phenotypic variation explained ranging from 2.42 to 74.16%. Notably, the functional mechanism of the candidate gene CoGID1a, the gibberellic acid receptor, of the major locus qPHIL5 was evaluated by transgenic analysis and virus-induced gene silencing. A dwarf phenotype-related single nucleotide mutation in CoGID1a was identified in gba, which was also unique to the dwarf phenotype of gba among 57 cultivars. Cogid1a was unable to interact with the growth-repressor DELLA even in the presence of highly accumulated gibberellins in gba. Differentially expressed genes between transcriptomes of gba and TZ4 after GA3 treatment indicated up-regulation of genes involved in gibberellin and cellulose synthesis in gba. Interestingly, it was found that up-regulation of CoMYB46, a key transcription factor in the secondary cell wall, by the highly accumulated gibberellins in gba promoted the expression of cellulose synthase genes CoCesA4 and CoCesA7. These findings provide valuable insights into fiber development affected by endogenous gibberellin accumulation in plants.

Fine-Tuning Quantitative Trait Loci Identified in Immortalized F2 Population Are Essential for Genomic Prediction of Hybrid Performance in Maize

Maize breeding is greatly affected by hybrid vigor, a phenomenon that hybrids exhibit superior performance than parental lines. The immortalized F2 population (IMF2) is ideal for the genetic dissection and prediction of hybrid performance. Here, in this study, we conducted the QTL mapping and genomic prediction of six traits related to plant architecture using an IMF2 population. Broad-sense heritability of these traits ranged from 0.85 to 0.94. Analysis of genetic effects showed that additive variance was the main contributor to phenotypic variations. The mapping of quantitative trait loci (QTLs) revealed 10 to 16 QTLs (including pleiotropic loci and epistatic QTLs) for the six traits. Additionally, we identified 15 fine-tuning QTLs for plant height (PH). For genomic prediction (GP), the model of additive and dominance (AD) exhibited higher prediction accuracy than those fitting general combining ability (GCA) and its combination with special combining ability (SCA) effects for all tested traits. And adding the epistasis (E) effect into the AD model did not significantly increase its prediction accuracy. Moreover, the identified 15 fine-tuning QTLs of PH, which exerted large genomic prediction effects, were verified by the marker effect of GP. Our results not only provide an approach for the fine-mapping of fine-tuning QTLs but also serve as references for GP breeding in crops.

A Structure Variation in qPH8.2 Detrimentally Affects Plant Architecture and Yield in Rice.

Plant height is an important agronomic trait associated with plant architecture and grain yield in rice (Oryza sativa L.). In this study, we report the identification of quantitative trait loci (QTL) for plant height using a chromosomal segment substitution line (CSSL) population with substituted segments from japonica variety Nipponbare (NIP) in the background of the indica variety 9311. Eight stable QTLs for plant height were identified in three environments. Among them, six loci were co-localized with known genes such as semidwarf-1 (sd1) and Grain Number per Panicle1 (GNP1) involved in gibberellin biosynthesis. A minor QTL qPH8.2 on chromosome 8 was verified and fine-mapped to a 74 kb region. Sequence comparison of the genomic region revealed the presence/absence of a 42 kb insertion between NIP and 9311. This insertion occurred predominantly in temperate japonica rice. Comparisons on the near-isogenic lines showed that the qPH8.2 allele from NIP exhibits pleiotropic effects on plant growth, including reduced plant height, leaf length, photosynthetic capacity, delayed heading date, decreased yield, and increased tiller angle. These results indicate that qPH8.2 from temperate japonica triggers adverse effects on plant growth and yield when introduced into the indica rice, highlighting the importance of the inter-subspecies crossing breeding programs.

Identification of Fusarium head blight sources of resistance and associated QTLs in historical and modern Canadian spring wheat.

Fusarium head blight (FHB) is one the most globally destructive fungal diseases in wheat and other small grains, causing a reduction in grain yield by 10-70%. The present study was conducted in a panel of historical and modern Canadian spring wheat (Triticum aestivum L.) varieties and lines to identify new sources of FHB resistance and map associated quantitative trait loci (QTLs). We evaluated 249 varieties and lines for reaction to disease incidence, severity, and visual rating index (VRI) in seven environments by artificially spraying a mixture of four Fusarium graminearum isolates. A subset of 198 them were genotyped with the Wheat 90K iSelect single nucleotide polymorphisms (SNPs) array. Genome-wide association mapping performed on the overall best linear unbiased estimators (BLUE) computed from all seven environments and the International Wheat Genome Sequencing Consortium (IWGSC) RefSeq v2.0 physical map of 26,449 polymorphic SNPs out of the 90K identified sixteen FHB resistance QTLs that individually accounted for 5.7-10.2% of the phenotypic variance. The positions of two of the FHB resistance QTLs overlapped with plant height and flowering time QTLs. Four of the QTLs (QFhb.dms-3B.1, QFhb.dms-5A.5, QFhb.dms-5A.7, and QFhb.dms-6A.4) were simultaneously associated with disease incidence, severity, and VRI, which accounted for 27.0-33.2% of the total phenotypic variance in the combined environments. Three of the QTLs (QFhb.dms-2A.2, QFhb.dms-2D.2, and QFhb.dms-5B.8) were associated with both incidence and VRI and accounted for 20.5-22.1% of the total phenotypic variance. In comparison with the VRI of the checks, we identified four highly resistant and thirty-three moderately resistant lines and varieties. The new FHB sources of resistance and the physical map of the associated QTLs would provide wheat breeders valuable information towards their efforts in developing improved varieties in western Canada.

QTL mapping and analysis for drought tolerance in rice by genome-wide association study.

Rice drought resistance is a complicated quantitative feature involving a range of biological and agronomic variables, but little is known about the underlying genetics and regulatory mechanisms that regulate drought tolerance. This study used 120 recombinant inbred lines (RILs), derived from a cross between drought tolerant Lvhan 1 and susceptible Aixian 1. The RILs were subjected to drought stress at the first ear stage, and phenotypic data of 16 agronomic and physiological traits under varying conditions were investigated. Genome-wide association study (GWAS) on the drought resistance index of traits was carried out. A total of 9 quantitative trait loci (QTLs) associated with drought-related traits were identified on chromosomes 2, 6, 7, 8, 9, and 10, which includes QTLs for plant height (PH) qPH10.1, effective panicles number (EPN) qEPN6.1, panicle length (PL) qPL9.1, thousand-grain weight (TGW) qTGW2.1, qTGW6.1, qTGW8.1, leaf length (LL) qLL7.1, leaf width (LW) qLW7.1, and leaf area (LA) qLA7.1. The fraction of phenotypic variation explained by individual QTL varied from 10.6% to 13.9%. Except for days to flowering (DTF), the mean values of all traits under normal water management conditions were considerably higher than those under drought conditions. Except for the DTF, the drought resistance index of all rice traits was less than 1, indicating that drought treatment reduced the EPN, FGPP, SSR, PH, and LA, which affected the growth and development of rice. The drought resistance index of DTF was 1.02, indicating that drought prolonged the heading time of rice and diminish the yield parameters. Along with identifying QTLs, the results also predicted ten candidate genes, which are directly or indirectly involved in various metabolic functioning related to drought stress. The identification of these genomic sites or QTLs that effectively respond to water scarcity will aid in the quest of understanding the drought tolerance mechanisms. This study will facilitate the marker-assisted rice breeding and handy in the breeding of drought-tolerant rice varieties.

High-density genetic mapping of Fusarium head blight resistance and agronomic traits in spring wheat.

Fusarium head blight (FHB) has rapidly become a major challenge to successful wheat production and competitive end-use quality in western Canada. Continuous effort is required to develop germplasm with improved FHB resistance and understand how to incorporate the material into crossing schemes for marker-assisted selection and genomic selection. The aim of this study was to map quantitative trait loci (QTL) responsible for the expression of FHB resistance in two adapted cultivars and to evaluate their co-localization with plant height, days to maturity, days to heading, and awnedness. A large doubled haploid population of 775 lines developed from cultivars Carberry and AC Cadillac was assessed for FHB incidence and severity in nurseries near Portage la Prairie, Brandon, and Morden in different years, and for plant height, awnedness, days to heading, and days to maturity near Swift Current. An initial linkage map using a subset of 261 lines was constructed using 634 polymorphic DArT and SSR markers. QTL analysis revealed five resistance QTL on chromosomes 2A, 3B (two loci), 4B, and 5A. A second genetic map with increased marker density was constructed using the Infinium iSelect 90k SNP wheat array in addition to the previous DArT and SSR markers, which revealed two additional QTL on 6A and 6D. The complete population was genotyped, and a total of 6,806 Infinium iSelect 90k SNP polymorphic markers were used to identify 17 putative resistance QTL on 14 different chromosomes. As with the smaller population size and fewer markers, large-effect QTL were detected on 3B, 4B, and 5A that were consistently expressed across environments. FHB resistance QTL were co-localized with plant height QTL on chromosomes 4B, 6D, and 7D; days to heading on 2B, 3A, 4A, 4B, and 5A; and maturity on 3A, 4B, and 7D. A major QTL for awnedness was identified as being associated with FHB resistance on chromosome 5A. Nine small-effect QTL were not associated with any of the agronomic traits, whereas 13 QTL that were associated with agronomic traits did not co-localize with any of the FHB traits. There is an opportunity to select for improved FHB resistance within adapted cultivars by using markers associated with complementary QTL.

Mapping quantitative trait loci for biomass yield and yield-related traits in lowland switchgrass (Panicum virgatum L.) multiple populations.

Switchgrass can be used as an alternative source for bioenergy production. Many breeding programs focus on the genetic improvement of switchgrass for increasing biomass yield. Quantitative trait loci (QTL) mapping can help to discover marker-trait associations and accelerate the breeding process through marker-assisted selection. To identify significant QTL, this study mapped seven hybrid populations and one combined of two hybrid populations (30 to 96 F1s) derived from Alamo and Kanlow genotypes. The populations were evaluated for biomass yield, plant height, and crown size in a simulated-sward plot with two replications at two locations in Tennessee from 2019 to 2021. The populations showed significant genetic variation for the evaluated traits and exhibited transgressive segregation. The 17,251 single nucleotide polymorphisms (SNPs) generated through genotyping-by-sequencing (GBS) were used to construct a linkage map using a fast algorithm for multiple outbred families. The linkage map spanned 1,941 cM with an average interval of 0.11 cM between SNPs. The QTL analysis was performed on evaluated traits for each and across environments (year and location) that identified five QTL for biomass yield (Logarithm of the odds, LOD 3.12 to 4.34), four QTL for plant height (LOD 3.01 to 5.64), and seven QTL for crown size (LOD 3.0 to 4.46) (P ≤ 0.05). The major QTL for biomass yield, plant height, and crown size resided on chromosomes 8N, 6N, and 8 K explained phenotypic variations of 5.6, 5.1, and 6.6%, respectively. SNPs linked to QTL could be incorporated into marker-assisted breeding to maximize the selection gain in switchgrass breeding.

Identification of quantitative trait loci for fiber quality, yield, and plant height traits in Upland cotton

AbstractIn cotton, most agronomic traits are controlled by polygenes. In this study, 110 F6 recombinant inbred lines (RILs), derived from Upland cotton cross NC05AZ06 x NC11‐2100, were used to develop a linkage map and to identify quantitative trait loci (QTL) for six fiber quality traits, three yield traits, and plant height. These RILs were genotyped using the CottonSNP63K array and phenotyped for fiber quality, yield traits, and plant height in 2‐year field trials. Analysis of variance revealed significant (p < 0.05) differences among RILs for all traits studied, and the heritability estimates were moderate (30%–60%) to high (> 60%). Both positive and negative correlations were observed for fiber quality and yield traits. A total of 3,774 polymorphic SNP markers were used to develop a genetic map with an average marker density of 1.54 SNP/cM. Thirty QTL for fiber quality traits, yield traits, and plant height were detected on 15 different chromosomes, explaining 6.80%–20.02% of the phenotypic variance (PVE). Of these, 14 were major QTL (PVE > 10%), and three major QTL were detected in both years. Candidate gene analysis in the major QTL detected in both years and plant height QTL with PVE of 20.02% revealed five putative genes for fiber quality traits and one putative gene for plant height. The linkage map and identified QTL along with the candidate genes in the study could serve as additional breeding resources for Upland cotton genetic improvement.

Time series canopy phenotyping enables the identification of genetic variants controlling dynamic phenotypes in soybean.

Advances in plant phenotyping technologies are dramatically reducing the marginal costs of collecting multiple phenotypic measurements across several time points. Yet, most current approaches and best statistical practices implemented to link genetic and phenotypic variation in plants have been developed in an era of single-time-point data. Here, we used time-series phenotypic data collected with an unmanned aircraft system for a large panel of soybean (Glycine max (L.) Merr.) varieties to identify previously uncharacterized loci. Specifically, we focused on the dissection of canopy coverage (CC) variation from this rich data set. We also inferred the speed of canopy closure, an additional dimension of CC, from the time-series data, as it may represent an important trait for weed control. Genome-wide association studies (GWASs) identified 35 loci exhibiting dynamic associations with CC across developmental stages. The time-series data enabled the identification of 10 known flowering time and plant height quantitative trait loci (QTLs) detected in previous studies of adult plants and the identification of novel QTLs influencing CC. These novel QTLs were disproportionately likely to act earlier in development, which may explain why they were missed in previous single-time-point studies. Moreover, this time-series data set contributed to the high accuracy of the GWASs, which we evaluated by permutation tests, as evidenced by the repeated identification of loci across multiple time points. Two novel loci showed evidence of adaptive selection during domestication, with different genotypes/haplotypes favored in different geographic regions. In summary, the time-series data, with soybean CC as an example, improved the accuracy and statistical power to dissect the genetic basis of traits and offered a promising opportunity for crop breeding with quantitative growth curves.

Identification of quantitative trait loci associated with sorghum susceptibility to Asian stem borer damage

ABSTRACT Sorghum (Sorghum bicolor (L.) Moench) is an important crop originated in Africa that shows susceptibility to herbivores. In this study, we identified two sorghum genotypes with highly contrasting levels of stem damage caused by the caterpillars of Asian stem borer (Ostrinia furnacalis Guenée). Recombinant inbred lines (RILs) from genetic cross between resistant (BTx623) and susceptible (NOG) sorghum were used to perform a quantitative trait locus (QTL) analysis in the field. Two major QTLs responsible for higher NOG infestation by stem borer in three independent field seasons were detected on chromosomes 7 and 9, interestingly in positions that overlapped with two major QTLs for plant height. As plant height and stem borer damage were highly correlated, we propose that sorghum height-associated morphological or physiological traits could be important for stem borer establishment and/or damage in sorghum.

Construction of high density genetic map and quantitative trait locus mapping in a sorghum Tx623A × sudangrass S722 population

AbstractSorghum–sudanense is a hybrid of sorghum and Sudanese grass and is widely used in animal husbandry and aquaculture because of its high yield, excellent quality and wide adaptability. Using high‐throughput sequencing, we constructed a high‐density genetic map of sorghum Tx623A × sudangrass S722 with 103 recombinant inbred lines (RILs) in this study and mapped quantitative trait loci (QTLs) for plant height (PH), stem diameter (SD), tiller number (TN), fresh weight (FW) and dry weight per plant (DW). The map included 1610 markers with a total length of 2329 cM and QTL mapping identified 19 QTLs, including two for PH, three for SD, four for TN, four for FW and five for DW. We detected two QTL clusters containing overlapping QTLs for PH, FW and DW. Orthologs of three SD candidate genes from maize were found within two SD QTLs. The identification of these QTLs will be useful for cloning the corresponding genes for these traits and developing marker‐assisted selection (MAS) in future sorghum breeding programs.

Genetic Mapping of Quantitative Trait Loci Associated with Plant Height and Yield Component Traits in a Wheat (Triticum aestivum L.) Doubled Haploid Population Derived from Tugela-DN × Elands

Grain yield is a quantitatively inherited complex trait that is strongly influenced by interacting genetic and environmental factors. The identification of major quantitative trait loci (QTL) for plant height (PH) and yield component traits (YCT) is important for improving yield potential through wheat breeding. We performed a QTL analysis for PH and YCT in the Tugela-DN × Elands doubled haploid (DH) population using a genotype-by-sequence single nucleotide polymorphism and a silicoDArT-based genetic map. Field trials were conducted under rain-fed conditions across five environments in the Free State Province of South Africa during the 2017–2018 and 2018–2019 cropping seasons. Analysis of variance revealed significant differences (p < 0.001) among DH lines and the environments. However, for G × E interactions, significant differences (p < 0.05) were only observed for spikelet number per spike. Broad-sense heritability estimates of all traits ranged between 0.44 and 0.81. Nine QTL, viz. QPh.sgi-6A.2 and QPh.sgi-4D for PH, QSl.sgi-6A.2 and QSl.sgi-7A for spike length, QGns.sgi-3B for grain number per spike (GNS), QGwps.sgi-7B for grain weight per spike (GWPS), QGw.sgi-2A and QGw.sgi-7A for grain width, and QGl.sgi-3B for grain length (GL), were identified on chromosomes 2A, 3B, 4D, 6A, 7A, and 7B, in two or more environments. Some of these QTL exhibited pleiotropic effects. The QPh.sgi-6A.2 QTL for PH and QGwps.sgi-7B for GWPS appear to be novel QTL, while the rest of the reported QTL validated previously identified QTL for PH and YCT. The study also reported a trade-off between GL and GNS. The findings of this study will be useful in elucidating the genetic architecture of yield component traits contributing to the development of new dryland wheat varieties with high and stable yield.

Fine mapping of candidate quantitative trait loci for plant and ear height in a maize nested-association mapping population.

Plant height (PH) and ear height (EH) are two important traits in maize (Zea mays L.), as they are closely related to lodging resistance and planting density. Our objectives were to (1) investigate single-nucleotide polymorphisms (SNPs) that are associated with PH and EH for detecting quantitative trait loci (QTL) and new gene that determines PH and EH, (2) explore the value of the QTL in maize breeding, and (3) investigate whether the “triangle heterotic group” theory is applicable for lowering PH and EH to increase yield. Seven inbred female parents were crossed with a common founder male parent Ye 107 to create a nested association mapping (NAM) population. The analysis of phenotypic data on PH and EH revealed wide variation among the parents of the NAM population. Genome-wide association study (GWAS) and high-resolution linkage mapping were conducted using the NAM population, which generated 264,694 SNPs by genotyping-by-sequencing. A total of 105 SNPs and 22 QTL were identified by GWAS and found to be significantly associated with PH and EH. A high-confidence QTL for PH, Qtl-chr1-EP, was identified on chromosome 1 via GWAS and confirmed by linkage analysis in two recombinant inbred line (RIL) populations. Results revealed that the SNP variation in the promoter region of the candidate gene Zm00001d031938, located at Qtl-chr1-EP, which encoded UDP-N-acetylglucosamine-peptide N-acetyl-glucosaminyl-transferase, might decrease PH and EH. Furthermore, the triangle heterotic pattern adopted in maize breeding programs by our team is practicable in selecting high-yield crosses based on the low ratio of EH/PH (EP).

Dynamic Quantitative Trait Loci Mapping for Plant Height in Recombinant Inbred Line Population of Upland Cotton

Plant height (PH) is a key plant architecture trait for improving the biological productivity of cotton. Ideal PH of cotton is conducive to lodging resistance and mechanized harvesting. To detect quantitative trait loci (QTL) and candidate genes of PH in cotton, a genetic map was constructed with a recombinant inbred line (RIL) population of upland cotton. PH phenotype data under nine environments and three best linear unbiased predictions (BLUPs) were used for QTL analyses. Based on restriction-site-associated DNA sequence (RAD-seq), the genetic map contained 5,850 single-nucleotide polymorphism (SNP) markers, covering 2,747.12 cM with an average genetic distance of 0.47 cM. Thirty-seven unconditional QTL explaining 1.03–12.50% of phenotypic variance, including four major QTL and seven stable QTL, were identified. Twenty-eight conditional QTL explaining 3.27–28.87% of phenotypic variance, including 1 major QTL, were identified. Importantly, five QTL, including 4 stable QTL, were both unconditional and conditional QTL. Among the 60 PH QTL (including 39 newly identified), none of them were involved in the whole period of PH growth, indicating that QTL related to cotton PH development have dynamic expression characteristics. Based on the functional annotation of Arabidopsis homologous genes and transcriptome data of upland cotton TM-1, 14 candidate genes were predicted within 10 QTL. Our research provides valuable information for understanding the genetic mechanism of PH development, which also increases the economic production of cotton.

Molecular mapping and validation of quantitative trait loci for spike-related traits and plant height in wheat

<p id="C3">Spike-related traits and plant height are important target traits in wheat breeding. In the present study, a population of 198 recombinant inbred lines (RILs) derived from the cross between a CIMMYT wheat line C615 and Yangmai 13 (YM13) was constructed, followed by genotyping with Wheat 90K SNP array and phenotyping of spike-related traits and plant height in three environments to excavate QTLs (quantitative trait loci) for these traits. Using composite interval mapping method, we identified one QTL for total spikelet number per spike (TSS), two QTLs for spike length (SL), two QTLs for spikelet compactness (SC), and three QTLs for plant height (PH). <italic>QSN.yaas-3B</italic> and <italic>QPH.yaas-3B</italic> overlapped on the chromosome 3B. <italic>QSL.yaas-5A</italic>, <italic>QSC.yaas-5A</italic> and <italic>QPH.yaas-5A</italic> overlapped on the chromosome 5A. <italic>QSL.yaas-6A</italic> and <italic>QSC.yaas-6A</italic> overlapped on the chromosome 6A. <italic>QSN.yaas-3B</italic>/<italic>QPH.yaas-3B</italic> and <italic>QSL.yaas-6A</italic>/<italic>QSC.yaas-6A</italic> had not been reported yet, and were likely to be novel loci. The SNP marker closely linked to <italic>QSL.yaas-5A</italic>/<italic>QSC.yaas-5A</italic>/<italic>QPH.yaas-5A</italic> was then converted into one Kompetitive Allele Specific PCR (KASP) marker (QC615-5A-KASP), and validated in a panel of 105 wheat lines. The results would be useful for improvement of yield related traits in wheat breeding.

Genome-wide association mapping identifies an SNF4 ortholog that impacts biomass and sugar yield in sorghum and sugarcane.

Sorghum is a feed/industrial crop in developed countries and a staple food elsewhere in the world. This study evaluated the sorghum mini core collection for days to 50% flowering (DF), biomass, plant height (PH), soluble solid content (SSC), and juice weight (JW), and the sorghum reference set for DF and PH, in 7-12 testing environments. We also performed genome-wide association mapping with 6 094 317 and 265 500 single nucleotide polymorphism markers in the mini core collection and the reference set, respectively. In the mini core panel we identified three quantitative trait loci for DF, two for JW, one for PH, and one for biomass. In the reference set panel we identified another quantitative trait locus for PH on chromosome 6 that was also associated with biomass, DF, JW, and SSC in the mini core panel. Transgenic studies of three genes selected from the locus revealed that Sobic.006G061100 (SbSNF4-2) increased biomass, SSC, JW, and PH when overexpressed in both sorghum and sugarcane, and delayed flowering in transgenic sorghum. SbSNF4-2 encodes a γ subunit of the evolutionarily conserved AMPK/SNF1/SnRK1 heterotrimeric complexes. SbSNF4-2 and its orthologs will be valuable in genetic enhancement of biomass and sugar yield in plants.

High-resolution bin-based linkage mapping uncovers the genetic architecture and heterosis-related loci of plant height in indica-japonica derived populations.

Plant height (PH) is an important trait affecting the plant architecture, seed yield, and harvest index. However, the molecular mechanisms underlying PH heterosis remain unclear. In addition, useful PH-related genes must be urgently identified to facilitate ideal plant architecture breeding in rice (Oryza sativa L.). In the present study, to explore rice quantitative trait loci (QTLs) and heterosis-related loci of PH in rice, we developed a high-generation (>F15 ) population of 272 recombinant inbred lines (RIL) from a cross of two elite varieties, Luohui 9 (indica/xian) × RPY geng (japonica/geng), and two testcross hybrid populations derived from the crosses of RILs and two cytoplasmic male sterile lines (YTA [indica] and Z7A [japonica]). Using deep resequencing data, a high-density genetic map containing 4758 bin markers was constructed, with a total map distance of 2356.41 cM. Finally, 31 PH-related QTLs for different PH component lengths or tiller numbers across five seasons were identified. Two major environment-specific PH QTLs were stably detected in Hainan (qPH-3.1) or Hubei (qPH-5.1), which have undergone significant functional alterations in rice with changes in geographical environment. Based on comparative genomics, gene function annotation, homolog identification, and existing literature (pioneering studies), candidate genes for multiple QTLs were fine-mapped, and the candidate genes qPH-3.1 and qPH-5.1 for PH were further validated using CRISPR-Cas9 gene editing. Specifically, qPH-3.1 was characterized as a pleiotropic gene, and the qPH-3.1 knockout line showed reduced PH, delayed heading, a decreased seed setting rate, and increased tiller numbers. Importantly, 10 PH heterosis-related QTLs were identified in the testcross populations, and a better-parent heterosis locus (qBPH-5.2) completely covered qPH-5.1. Furthermore, the cross results of fixed-genotype RILs verified the dominant effects of qPH-3.1 and qPH-5.1. Together, these findings further our understanding of the genetic mechanisms of PH and offer multiple highly reliable gene targets for breeding rice varieties with ideal architecture and high yield potential in the immediate future.