Plant Capacity Research Articles

Physiological and molecular responses of strawberry plants to Cd stress

Cadmium (Cd), a toxic metal element, can be absorbed by plants via divalent metal ion transporters, thereby retarding plant growth and posing a threat to human health. Strawberries are popular and economically valuable berry species that are sensitive to soil pollutants, especially Cd. However, the mechanisms underlying Cd stress responses in strawberry plants remain largely unclear. Here, we investigated the physiological and molecular basis of Cd stress responses in strawberry plants using the diploid strawberry ‘Yellow Wonder’ as a material. The results indicated that Cd stress induced oxidative damage, repressed photosynthetic efficiency, and interfered with the accumulation and redistribution of trace elements. Furthermore, Cd stress reduced the concentrations of indoleacetic acid, trans-zeatin riboside and gibberellic acid while increasing the concentration of abscisic acid, thus altering the phytohormone signaling pathway in strawberry plants. Cd stress also inhibited the expression of genes involved in nitrogen uptake and assimilation while promoting the energy supply for plant survival under Cd toxicity. Moreover, the flavonoid biosynthesis pathway was induced, and the anthocyanin concentration increased, thereby improving the free radical scavenging capacity of strawberry plants under Cd toxicity. Additionally, we identified several transcription factors and functional genes as hub genes based on a weighted gene coexpression network analysis. These results collectively provide a theoretical foundation for strawberry breeding and ensuring agriculture and food safety.

Heterosis for Interactions between Insect Herbivores and 3-Line Hybrid Rice under Low and High Soil Nitrogen Conditions.

Hybrid rice results from crossing a male-sterile line (the A line) with a pollen doner (the restorer or R line). In 3-line hybrid breeding systems, a fertile B line is also required to maintain A line populations. Heterosis is defined as a condition of traits whereby the hybrid exceeds the average of the parental lines. Heterobeltiosis is where the hybrid exceeds both parents. Hybrid rice may display heterosis/heterobeltiosis for growth, yield and resistance to herbivores, among other traits. In a greenhouse experiment, we assessed the frequency of heterosis for resistance to the brown planthopper (Nilaparvata lugans (BPH)), whitebacked planthopper (Sogatella furcifera (WBPH)) and yellow stemborer (Scirpophaga incertulas (YSB)) in eight hybrids under varying soil nitrogen conditions. We also assessed plant biomass losses due to herbivore feeding as an approximation of tolerance (the plant's capacity to compensate for damage). Nitrogen reduced resistance to all three herbivores but was also associated with tolerance to WBPH and YSB based on improved plant survival, growth and/or yields. Plant biomass losses per unit weight of WBPH also declined under high nitrogen conditions for a number of hybrids, and there were several cases of overcompensation in rice for attacks by this herbivore. There was one case of nitrogen-related tolerance to BPH (increased grain yield) for a hybrid line with relatively high resistance, likely due to quantitative traits. Heterosis and heterobeltiosis were not essential to produce relatively high herbivore resistance or tolerance across hybrids.

Comparison between computer recognition and manual measurement methods for the estimation of leaf area.

Leaf area (A) is a crucial indicator of the photosynthetic capacity of plants. The Montgomery equation (ME), which hypothesizes that A is proportional to the product of leaf length (L) and width (W), is a valid tool for non-destructively measuring A for many broadleaved plants. At present, the methods used to compute L and W for the ME can be broadly divided into two kinds: using computer recognition and measuring manually. However, the potential difference in the prediction accuracy using either method has not been thoroughly examined in previous studies. In the present study, we measured 540 Alangium chinense leaves, 489 Liquidambar formosana leaves and 215 Liriodendron × sinoamericanum leaves, utilizing computer recognition and manual measurement methods to determine L and W. The ME was used to fit the data determined by the two methods, and the goodness of fits were compared. The prediction errors of A were analysed by examining the correlations with two leaf symmetry indices (areal ratio of the left side to the right side, and standardized index for bilateral asymmetry), as well as the leaf shape complexity index (the leaf dissection index). The results indicate that there is a neglectable difference in the estimation of A between the two methods. This further validates that the ME is an effective method for estimating A in broadleaved tree species, including those with lobes. Additionally, leaf shape complexity significantly influenced the estimation of A. These results show that the use of computer recognition and manual measurement in the field are both effective and feasible, although the influence of leaf shape complexity should be considered when applying the ME to estimate A in the future.

Planning of Production Capacities of Precast Construction Plants under Conditions of Changes in Demand for Products

The main criterion for a feasibility study of the production efficiency of precast construction plants, analysis of internal production reserves and optimal production volume is the production capacity indicator. Thus, the study of various Factors influencing the production capacity indicators is an important task. The results of research of the influence of the number of storeys and the set of block sections in the configuration of industrial residential buildings on changes in the ratio of product types in the range of the production programme of plants are presented in the paper. Fluctuations in the ratio of product types during the construction of different types of houses have been established. Based on the obtained results, the dependence of the production capacity plants on fluctuations in the ratio of product types has been constructed. It has been determined that the main reason for the revealed facts of a decrease in production capacity is the uneven loading of production lines with fluctuations in the ratio of product types in the range of production programs of precast construction plants. Taking into account the known facts of the dependence of production capacity on the concrete capacity of block sections of houses, the results of a comparison of the degree of influence of concrete capacity on the production capacity and the ratio of the main types of products in the range of production programs of plants are presented in the paper. It has been established that a key influence on the indicators of production capacity is exerted by changes in the ratio of product types. On the basis of the conducted research, optimal reserves of production capacity have been determined with a high share of different types of houses in the production programs of the plants. Taking into account the established indicators of production capacity reduction, their optimal reservation is within 20–25 % of the design capacity of the plants, which should serve as a reference point when planning the functioning of the production management system under the conditions of changes in demand for products.

The role of the plant microbiome for forestry, agriculture and urban greenspace in times of environmental change.

This Lilliput article provides a literature overview on ecological effects of the plant microbiome with a focus on practical application in forestry, agriculture and urban greenspace under the spectre of climate change. After an overview of the mostly bacterial microbiome of the model plant Arabidopsis thaliana, worldwide data from forests reveal ecological differentiation with respect to major guilds of predominantly fungal plant root symbionts. The plant-microbiome association forms a new holobiont, an integrated unit for ecological adaptation and evolutionary selection. Researchers explored the impact of the microbiome on the capacity of plants to adapt to changing climate conditions. They investigated the impact of the microbiome in reforestation programs, after wildfire, drought, salination and pollution events in forestry, grasslands and agriculture. With increasing temperatures plant populations migrate to higher latitudes and higher altitudes. Ecological studies compared the dispersal capacity of plant seeds with that of soil microbes and the response of soil and root microbes to experimental heating of soils. These studies described a succession of microbiome associations and the kinetics of a release of stored soil carbon into the atmosphere enhancing global warming. Scientists explored the impact of synthetic microbial communities (SynComs) on rice productivity or tea quality; of whole soil addition in grassland restoration; or single fungal inoculation in maize fields. Meta-analyses of fungal inoculation showed overall a positive effect, but also a wide variation in effect sizes. Climate change will be particularly prominent in urban areas ("urban heat islands") where more than half of the world population is living. Urban landscape architecture will thus have an important impact on human health and studies started to explore the contribution of the microbiome from urban greenspace to ecosystem services.

Modelling, simulation, and measurement of solar power generation: New developments in design and operational models

The discrepancy between the operating and design capacities of solar plants in eastern Uganda is alarming; about 35 % underperformance in solar power generation is observed. The goal of the current study is to minimize this disparity by improving the design models. Considering only cell temperature in the power generation model is responsible for the observed difference in design and operational solar power generated, the present study used a thermocouple to directly measure cell temperature, an anemometer to measure wind speed, and a solar power meter to measure irradiance. These extrinsic factors were used to modify the power generation model based only on cell temperature through the direct correlation of cell temperature, wind speed, and irradiance with solar power generation. Thus, the absence of extrinsic factors (wind speed and irradiance) in the design models is responsible for the colossal drop in solar power generated. Empirically, the missing extrinsic factors were used to transform the implicit solar power model into an explicit model. The development of a solar power generation model, multiple differential models, simulation and experimentation with a pilot solar rig served as alternate model for the prediction of solar power generation. The second-order differential model validated well with empirical solar power generated in Busitema, Mayuge, Soroti, and Tororo study areas based on RMSEs (0.6437, 0.6692, 0.2008, 0.1804, respectively), thus, narrowing the gap between the designed and operational solar power generated. Mayuge and Soroti recorded the highest solar power generation of 9.028 MW compared to Busitema (8.622 MW) and Tororo (8.345 MW), suggesting that it has a conducive site for installing future solar plants. The above results support the use of empirical explicit (triple) and second-order differential models for the design and operation of power plants.

Vegetation patches modify the acquisition of nitrogen by plants and microorganisms in a degraded alpine steppe

Nitrogen (N) is an essential nutrient for both plants and soil microbes, but it often has limited availability. Currently, little is known about the effects of different vegetation patch types on the partitioning of N between plants and soil microorganisms in grassland ecosystems. In the present study, we performed a 15N-labelling experiment (using 15N-NO3− and 15N-NH4+) to investigate N uptake by plant biomass and microbial biomass for five common vegetation patch types in a degraded alpine steppe on the Tibetan Plateau. The results showed that plants and soil microorganisms in all patches showed a clear preference for the uptake of NO3−. Plants in patches dominated by palatable species absorbed more N than plants in unpalatable species patches, while N uptake in the microbial biomass in unpalatable species patches was higher than that in palatable species patches. For the two soil depths, plants in Poa litwinowiana patches had the highest N uptake (NO3−: 13.32–51.28 mg m-2; NH4+: 0.35–1.36 mg m-2), whereas microbial biomass in Oxytropis glacialis patches had the highest N uptake (NO3−:846.97–1659.87 mg m-2; NH4+: 108.75–185.14 mg m-2) among the five vegetation patch types. For both forms of N, soil microorganisms acquired relatively more N than the plants in the five vegetation patch types (i.e., the ratio of microbial biomass N uptake to plant biomass N uptake was greater than 1). The N-absorbing capacity of plants decreased, whereas the capacity of soil microorganisms to take up N increased with the degradation of vegetation patches. Microorganisms that compete more strongly for N might reduce the uptake of nutrients by plants in degraded patches, which would not be conducive to the restoration of vegetation in N-limited alpine grasslands.

Optimizing the Growth and Production of Pagoda Mustard Plants (Brassica narinosa L.) by providing Tofu Dregs Compost and Banana Peel Liquid Organic Fertilizer

The pagoda mustard plant ( Brassica narinosa L.) is a type of vegetable that is healthy nutritious, and easy to cultivate because it is classified as an annual plant with a harvest age ranging from 40 to 45 HST. This research aims to optimize the growth and production of pagoda mustard greens ( Brassica narinosa L.) by providing Tofu Dregs Compost and Banana Peel POC. The location of this research was carried out in the appropriate home environment area in Danau Balai A Village, Rantau Selatan District, Labuhan Batu Regency, and the Agrotechnology Laboratory, Faculty of Science and Technology, Labuhan Batu University. Research I used the two-factor Randomized Group Plan (RAK) research method with three replications. ANOVA variance analysis (variety analysis) was used to test the observation data statistically. Duncan's Multiple Range Test (DMRT) was carried out at an α level of 0.05. The effect of giving banana peel POC and tofu dregs fertilizer in each treatment was not significantly different on the growth capacity of pagoda mustard plants. Based on the analysis of variance, POC treatment of banana peel waste had no significant effect on the number of pagoda mustard leaves aged 14 DAP, 21 DAP, and 28 DAP. POC treatment of Ambon banana peel waste had a significant effect on the number of pagoda mustard leaves at 35 HST and 42 HST.

‘Mind the Gap’—reforestation needs vs. reforestation capacity in the western United States

Tree establishment following severe or stand-replacing disturbance is critical for achieving U.S. climate change mitigation goals and for maintaining the co-benefits of intact forest ecosystems. In many contexts, natural post-fire tree regeneration is sufficient to maintain forest cover and associated ecosystem services, but increasingly the pattern and scale of disturbance exceeds ecological thresholds and active reforestation may be warranted. Our capacity to plant trees, however, is not keeping pace with reforestation needs. This shortfall is uniquely apparent in the western U.S., where wildfire size and severity have increased in recent decades and long-term divestment in the reforestation supply chain has limited our ability to respond to existing needs. Here we present an analysis of key facets of both the supply and demand side of reforestation in the western U.S. and address six questions: (1) What is the current backlog of potential reforestation needs driven by high-severity wildfire?; (2) How will increasing wildfire activity through the end of the century affect potential reforestation needs?; (3) What is our capacity to meet current and future reforestation needs?; (4) How can we scale the reforestation supply chain to meet current and future demands?; (5) What approaches to reforestation can promote forest resilience to climate change and wildfire?; and (6) Where are opportunities emerging from recent policy initiatives, innovative public-private partnerships, and natural capital markets for scaling reforestation? Between 1984 and 2000, annual tree planting capacity met post-fire needs but cumulatively over the last two decades (2000 to 2021) it has fallen short of fire-driven needs by an estimated 1.5 million ha (ca. 3.8 million ac). We anticipate this gap will increase 2 to 3 fold by 2050. Scaling up reforestation efforts to close this gap will require increased investment across all facets of the reforestation supply chain, public-private partnerships, and novel approaches to reforestation that increase the resilience of western forests to drought and wildfire. We highlight emerging opportunities from recent policy initiatives and conservation finance for expanding reforestation efforts.

Comprehensive assessment of turfgrass wear tolerance: A study on mechanical and chemical traits

A key criterion in the selection process for turfgrass breeding is effective wear tolerance, indicating the plant's capacity to endure forces that may impact leaves, stems, crowns, and roots. In this study, the correlation between mechanical and chemical traits and the wear tolerance of 37 cultivars belonging to seven turfgrass species was examined. Mechanical properties and fiber characteristics of wide range of turfgrass cultivars were determined and compared for the first time. The evaluation of turf wear tolerance (described as turf cover index, TCI) was conducted through a three-year field trial using a Brinkman traffic simulator. Tensile tests were conducted to determine biomechanical parameters. According to the TCI, the most wear-resistant cultivars were those of Lolium perenne, Most of these cultivars demonstrated a TCI below 0.1. The cultivar 'Nira' was the most resistant, with a TCI of − 0.285. The least resilient cultivars belonged to Festuca ovina and Festuca rubra, all exhibiting TCI values above 0.6. Agrostis stolonifera and Agrostis capillaris were characterised by lower cellulose and acid detergent fiber content but high hemicellulose content. The opposite result was determined for Festuca rubra and Festuca ovina. The highest hemicellulose ratio was obtained for Poa pratensis. Lolium perenne was characterised by relatively high content of cellulose, lignin and hemicellulose. Cultivars of Festuca arundinace distinctly differed from other cultivars, demonstrating higher mechanical resistance with an average force-to-break of 3.73 N. Cultivars of Agrostis stolonifera and Agrostis capillaris reached force-to-break values up to 1.0 N. The relationships between TCI and fiber composition of turfgrass leaves were significant for crude fiber, NDF and hemicellulose content. Thus higher NDF and hemicellulose content resulted in higher force-to-break and work-to-break parameters.

Beneficial Effects of Hemin on Antioxidative Capacity and Anatomical Characters of NaCl-Stressed Rice Plants

Beneficial Effects of Hemin on Antioxidative Capacity and Anatomical Characters of NaCl-Stressed Rice Plants

A new energy-economy-environment modeling framework: Insights from decarbonization of the Turkish power Sector towards net-zero Emission targets

The power sector plays a crucial role towards decarbonization for many economies, especially in line with the net-zero targets to limit global warming to 1.5 °C. Technical constraints intrinsic to the sector, penetration of new technologies, investment and operational costs, and its connections with the rest of the economy make the power sector a complex system to analyze. Although there are numerous studies to integrate bottom-up power sector technology models with top-down macroeconomic models, this study is the first attempt to link the three separate and interrelated models within a single framework: an electricity market simulation model, a generation expansion planning model, and an applied general equilibrium model. The proposed framework is implemented to analyze a feasible decarbonization scenario for Türkiye, with a particular focus on the power sector. The results suggest that, given the existing capacity and potential for renewables, Türkiye can achieve a coal-phase out by early 2030s, alongside a trajectory towards a full-fledged fossil fuel phase-out in power generation. The results also indicate that while installed capacity and generation of coal-fired power plants are reduced, real GDP and electricity demand can be maintained and the carbon dioxide emissions from the power sector could be reduced by as much as 50% in 2030 compared to 2018 levels.

Physiological Characterization of Cold Tolerant and Susceptible Pigeon Pea [Cajanus cajan (L.) Millsp.] Genotypes

Background: The cold stress adversely affects the growth, survival and reproductive capacity of plants if the minimum temperature falls below 5°C. Information’s regarding cold stress and its impact on morphological characters, physio-biochemical constituents and yield attributes in cold tolerant and susceptible pigeon pea genotypes are very limited. Keeping the above facts in to consideration, the experiments were conducted. Methods: Field experiments were conducted during 2018-19 and 2019-20 with 34 genotypes of pigeon pea including checks (NDA-1, Bahar, IPA203, NDA-2, MAL-13, ICP2275, IPACT-2, MA-6, IPACT-3, IPACT-24, Rajendra Arhar, IPA15F, Dholi-D, JBT46/27, IPACT-6, IPACT-14, IPAD1-17, IPAC 68, IPACT 22, ICPL 7035 IPA19-101, IPA19-102, IPA19-103, IPA19-104, IPA19-105, IPA19-106, IPA19-107, IPA19-108, IPA19-109, IPA19-110, IPA19-111, IPA19-112, IPA19-113, IPA19-114) in RBD at ICAR-IIPR, Kanpur. Morphological and yield Characters including plant height, scoring of cold injury in exposed plants and Number of flower drop and pod set during the cold period in tagged plants were recorded. In biochemical/ crop efficiency parameters viz: Nitrogen balance index, chlorophyll, flavonols, anthocyanin’s and NDVI were measured. The photosynthetic rate, stomatal conductance, and transpiration rate were measured at the pod formation stage. Anti-oxidant enzymes activity was assayed as per standard methods. Meteorological observations during Cold stress were recorded. Result: Based on flower/pod drop and retention the genotypes like IPA 15F, Dholi dwarf, JBT46/27, IPACT-6, IPACT-14, IPAC-1-17, IPACT-68, IPACT-22, IPA 19-101, IPA 19-102, IPA 19-103, IPA 19-104, IPA 19-105, IPA 19-107, IPA 19-108, IPA 19-109, IPA 19-110, IPA 19-111 and IPA 19-113 were found susceptible to cold stress and retaining an average 51.67 % flowers/pods. Genotypes like NDA-2, MAL-13, ICP2275, IPACT-2, MA-6, IPACT-3, IPACT-24, Rajendra arhar, IPA19-106, IPA19-112 and IPA19-114 have retained more than an average of 67.48% flowers/pods are considered tolerant to cold stress. Amongst the tolerant group NDA-2, MAL-13, ICP2275, IPACT-2, IPA19-106, IPA19-112 retained the flower/pod more than the average of check genotypes (67.57%). Biochemical/plant efficiency parameters were superior in tolerant group over susceptible group.

Anti-Urolithiasis Activity of Selected Plant Extracts by Titrimetry Method and Aggregation Assay

A major global health concern with a high recurrence rate is urolithiasis. Various in vivo and in vitro techniques have been effective in assessing the anti urolithiatic capacity of therapeutic plants. Renal stone production can be studied using in vitro models, whereas the pathological implications of urolithiasis are declared using in vivo models. Therefore, preventative management can be considerably and successfully evaluated using in vitro models, whereas urolithiasis treatment can be directed by using in vivo models. This study explains the benefits, drawbacks, and uses of both models, with a focus on the contribution of in vitro research to the assessment of preventive care. We done Physicochemical Tests for Phyllanthus acidus (fruits) Tinospora cordifolia (leaves) and Psidium gujava (fruits and leaves ) and also Preliminary Phytochemical Investigation of Phyllanthus acidus (fruits), Tinospora cordifolia (leaves) and Psidium gujava (fruits and leaves).

Fiber-based super-bridging agents improve flotation and settling during water treatment

Increasing demand for water poses a major challenge to the water treatment industry. Consequently, water treatment plants are expected to require larger separation units and use more chemicals. Physicochemical treatments produce flocs that are limited in size, which limits floc removal efficiency during gravitational separation. Introducing fiber-based super-bridging agents has improved the floc size, which is 10–100 times larger than conventional flocs. Such improvements could lead to important gains in floc separation and ultimately increase the capacity of water treatment plants. This study analyzed the behavior and interaction of fibers under various coagulation/flocculation conditions to improve flotation and settling. The results also showed that fibers can allow a ~ 50 % reduction in coagulant. The benefits of fibers on floc size were particularly pronounced during suboptimal coagulation, as the injection of fibers compensated for poor coagulation conditions. Air bubbles during air flotation were also better incorporated into the larger and more porous floc structure obtained with fibers, which drastically improved floc removal during flotation. The best turbidity removal after flotation was obtained when combining 2 mg of cationic polyacrylamide and 200 mg of softwood fibers/L. Fiber-based super-bridging agents can be introduced in existing water treatment plants to increase plant capacity, reduce the demand for coagulants/flocculants, and improve contaminant removal.

A Whole Plant Analysis of Chloride and Sodium Exclusion Using a Range of Grapevine Rootstock Genotypes

Background and Aims. Salt exclusion is an important attribute for wine grapes since many countries have limits to the concentration of sodium (Na+) and/or chloride (Cl−) tolerated in wine. The aim was to investigate whole plant capacity for Na+ and Cl‾ exclusion and the within-plant partitioning of accumulated ions to better understand these important salt tolerance traits. Methods and Results. Rooted cuttings of 140 Ruggeri and K51-40 (good and poor shoot Cl− excluders, respectively) and five hybrids from a cross between the two genotypes were used. When challenged with salinity, 140 Ruggeri limited the accumulation of Cl− and Na+ in the stem, petioles, and laminae and had a significantly lower whole plant concentration of Cl− and Na+ when compared to K51-40. The latter indicates that 140 Ruggeri accumulates less Cl− and Na+ than K51-40 by a lower uptake or a potentially greater efflux by roots, or both. While K51-40 accumulated significantly more Na+, it was able to retrieve it from the xylem; store it in the roots, stem, and petiole; and keep the lamina concentration comparable to that of 140 Ruggeri. Petioles of all genotypes appeared to play a role in limiting Cl− accumulation in laminae and particularly for K51-40, to limit Na+ accumulation in laminae. Conclusions. The grapevine capacity for Cl− and Na+ exclusion can be defined primarily as the lower net accumulation on a whole plant basis, reflecting the difference between the uptake and any efflux that may occur. Lower root to shoot transport is a key factor in shoot Cl− and Na+ exclusion. Petiole accumulation assists in limiting the Cl− and Na+ accumulation in the laminae. Significance of the Study. The study addressed the knowledge gap by examining Cl− and Na+ exclusion on a whole plant basis, highlighting a range of within-plant mechanisms that act in limiting the accumulation of both ions in the laminae.

Influence of the Parameters of an Agricultural Biogas Plant on the Amount of Power Generated

Energy from biogas is widely available, inexpensive, and often contributes to waste management, making it one of the most promising renewable energy sources. The main factors influencing this process’ efficiency include the substrates’ chemical composition, temperature, and digester load. This paper presents the possibilities offered by a biogas plant built at a farm specialising in dairy cows. The dependence of the power generated in the micro biogas plant on its technical parameters was analysed in detail. Studies carried out by the authors in an agricultural microgas plant (with an electrical output of 40 kW) have shown that they are designed to maintain continuous energy production, despite changing process parameters such as digester mass level, biogas height, temperature or slurry flow into the digester. However, from the point of view of the amount of electricity generated, changes would have to be made to the design of the biogas plant. Firstly, a more powerful generator would have to be installed to cover the electricity requirements of the equipment installed in the biogas plant so that power close to the rated capacity of the biogas plant is still sent to the grid. Secondly, replacing the two existing agitators of the digestion mass (9 kW each) with more agitators of lower power (e.g., four agitators of 4.5 kW each) would be necessary. These should be programmed so that one of the agitators operates at any given time (the operating time of a given agitator should depend on the composition of the digestate).

THERMAL POWER PLANTS IN NIGERIA, LOCATION & CAPACITY, PERFORMANCE AND PRESENT STATUS (PART A)

This survey research paper, titled "Thermal Power Plants in Nigeria: Location, Capacity, Performance, and Present Status (Part A)" focuses on five major thermal power plants in Nigeria. Noticeably, electric power is a significant challenge for the industrial growth of a developing country. Rural areas often lack access to generated power. The major plants discussed include Egbin Thermal Power Plant (Lagos State), Alaoji Thermal Power Plant (Abia State), Afam Thermal Power Plant (Rivers State), Ughelli Delta Thermal Power Plant (Delta State), and Olorunsogo Power Plant (Ogun State), all located in the south-west part of Nigeria near gas pipelines. The article aims to extract data and information from various sources herein to provide insights into the generation capacity, location, and performance of these power plants. Ownership varies, with some power plants government-owned and others operating as public-private partnerships under NIPP, etc. The generation capacity may differ due to ongoing efforts to increase capacity as the case may be. Thus, the overview of these major thermal power plants in Nigeria is presented in tables, detailing installation year, commission, and current generation capacity. Subsequently, Part B will present other major thermal power plants in Nigeria, covering their status, ownership, and operational capacity.

Polybrominated diphenyl ethers (PBDEs) decreased the protein quality of rice grains by disturbing amino acid metabolism

Polybrominated diphenyl ethers (PBDEs) in soils posed potential risks to crop growth and food safety due to their prevalence and persistence. PBDEs were capable of being absorbed and accumulated into crops, impacting their growth, whereas the interference on metabolic components and nutritional composition deserves further elucidation. This study integrated a combined non-targeted and targeted metabolomics method to explore the influences of 2,2′,4,4′-tetrabromodiphenyl ether (BDE-47), 2,2′,4,4′,5-pentabromodiphenyl ether (BDE-99) and decabromodiphenyl ether (BDE-209) on the metabolic responses of rice (Oryza sativa). Metabolic pathways, which were associated with sugars, organic acids, and amino acids, were significantly disturbed under PBDE stresses. Particularly, 75% of the marked altered pathways belonged to amino acid metabolism, with alanine/aspartate/glutamate metabolism being commonly enhanced. The degradation of aspartic acid promoted the formation of downstream amino acids, among which the levels of lysine, methionine, isoleucine, and asparagine were increased by 1.31–3.15 folds compared to the control. Thus, the antioxidant capacity in rice plants was enhanced, particularly through the significant promotion of ascorbic acid-glutathione (AsA-GSH) cycle in rice leaves. The amino acids were promoted to resist reactive oxygen species (ROS) efficiently, thus were deficient for nutrient storage. When exposed to 4 μmol/kg PBDEs, the contents of amino acids and proteins in grains decreased by 9.1–32.1% and 8.6–34.8%, respectively. In particular, glutelin level was decreased by 5.6–41.2%, resulting in a decline in nutritional quality. This study demonstrated that PBDEs deteriorated the protein nutrition in rice grains by affecting amino acid metabolism, providing a new perspective for evaluating the ecological risks of PBDEs and securing agricultural products.

Pine needle gasification-based electricity production: Understanding the effect of supply chain.

Pine needles (pine tree leaves), found abundantly across continents such as North America, Asia, Europe, South America, Africa, and parts of the Southern Hemisphere, are a significant global concern due to their high susceptibility to catching fire, especially in dry and hot climates. The same issue persists in the Uttarakhand state of India, which boasts ample pine forests, yielding a substantial 1.67 × 109kg of pine needles annually. In the present study, the annual potential emissions from forest fires in Uttarakhand were estimated to be 58.37 × 109kg of CO2 equivalent. Therefore, the present research aims to unlock pine needles' potential via gasification for green electricity and biochar production, offering an alternative to coal-based plants while reducing forest fire frequencies. Nevertheless, obstacles hindering pine needle gasification include an unsteady supply chain, limited collection windows (100days), and plant expenses, including transportation and operational costs. The primary focus of the research is to design and assess the performance of a gasification-based supply chain for pine needles in the Almora District of Uttarakhand. Ten plant capacity scenarios were considered, ranging from 25 to 250kW. The study incorporated critical factors, encompassing diverse losses within the supply chain, selecting potential plant sites, minimizing transportation distance, and evaluating the supply chain's economic and environmental performance. The economic analysis revealed that the 250-kW plant scenario exhibited a minimum discounted payback period (DPP) of 3.93years, alongside an internal rate of return (IRR) of 19% and a net present value (NPV) of 653.32 million INR without government subsidies. With subsidies included, the DPP decreased to 1.30years, improving the IRR to 69% with an NPV of 916.17 million INR. The emission analysis indicated that gasification plant capacity scenarios could potentially reduce 44.63 × 106 to 46.16 × 106kg of CO2 equivalent emissions annually compared to grid electricity while meeting nearly 5.5% of the electricity demand of Almora district. The present study aligns with SDG-7 (Affordable and Clean Energy), SDG-13 (Climate Action), SDG-9 (Industry, Innovation, and Infrastructure), SDG-11 (Sustainable Cities and Communities), SDG-3 (Good Health and Well-being), and SDG-15 (Life on Land).