Plane Images Research Articles

Impact of uterine displacement on T2-weighted image quality in the female pelvic MRI.

Despite the importance of T2-weighted image in clinical practice, artifacts can significantly degrade image quality and affect diagnosis. This study quantitatively analyzed uterine displacement and surveyed the relationship between the image quality of fast-spin-echo-T2-weighted image of the female pelvis and quantitative value of uterine displacement. Overall, 147 women (mean age, 46.0 ± 12.8years; age range, 22-84years) who had undergone pelvic magnetic resonance imaging examination using a 3T- magnetic resonance imaging scanner were included. Two radiologists performed a visual assessment of the fast-spin-echo-T2-weighted image in the sagittal plane in terms of ghosts and motion blur, and classified the image quality into the following three groups: poor, moderate, and excellent. Uterine displacement on half-Fourier acquisition single-shot turbo spin-echo-cine images was calculated, and the maximum amplitude of uterine displacement and summation of uterine displacement were calculated from the displacement map images. The Kruskal-Wallis and Steel-Dwass tests were performed to compare the maximum amplitude of uterine displacement and summation of uterine displacement among the three groups. Poor, moderate, and excellent image qualities were observed in 48, 71, and 28 patients, respectively. The quality of fast-spin-echo-T2-weighted images degraded statistically significantly with P < 0.01 as the maximum amplitude of uterine displacement increased. The summation of uterine displacement in the poor and moderate groups had greater statistical significance with P < 0.01 than that in the excellent group.

Abstract 4136290: Toward Quantitative Assessment of Cerebrovascular Autoregulation in Neonates using Ultrafast Ultrasound Power Doppler

Introduction: Newborns with congenital heart diseases requiring cardiopulmonary bypass are at risk of neurodevelopmental impairment. The impact of deep hypothermia during cardiopulmonary bypass (DH-CPB) on cerebrovascular autoregulation (CAR) that controls brain perfusion in the presence of variable blood pressure is not well understood. Recently, Ultrafast Power Doppler (UPD) showed potential to study CAR in neonates based on the measurement of cerebral blood volume (CBV). However, since CAR relies mainly on the arterial vasoconstriction/vasodilation, the interpretation of brain perfusion based on CBV requires further separation of arterial CBV from total CBV. This study aims to use UPD to monitor CAR during DH-CPB in neonates. Methods: An ultrasonic probe (5.7 MHz) was placed on the anterior fontanel of 6 newborns before, during and after DH-CPB. Using ultrafast sequences generated by a Verasonic Vantage research system, mid-coronal plane images were acquired (PRF of 9 kHz, 5 compounded diverging waves). An adaptive spatiotemporal singular value decomposition was used to separate the blood signal from tissue signal and obtain UPD. CBV was computed in the deep gray matter (DGM). This region was chosen due to its higher susceptibility to hypoxic-ischemic injury. Arterial CBV was isolated from total CBV based on the upward arterial flow obtained using signed-power Doppler (See Fig A). Pearson correlation ® was computed between mean arterial blood pressure (MAP) and arterial CBV to study CAR. Results: Before and after DH-CPB, negative correlations were found between arterial CBV and MAP: -0.30 and -0.43 respectively. This indicates that an increase in MAP is associated with a decrease in cerebral arterial blood volume. This decrease in arterial CBV likely arises from arterial vasoconstriction, suggesting an active CAR response. Conversely, during DH-CPB, no correlation was found (r = -0.02). This means that despite the increase in MAP, arterial CBV remains unchanged. This lack of variation of arterial CBV is likely due to absent arterial vasoconstriction, suggesting an impaired CAR response. Conclusion: Our findings highlight the potential of UPD for continuous monitoring of CAR, paving the way for improving neurovascular management strategies during DH- CPB.

Beyond Photometric Consistency: Geometry-Based Occlusion-Aware Unsupervised Light Field Disparity Estimation.

Although learning-based light field disparity estimation has achieved great progress in the most recent years, the performance of unsupervised light field learning is still hindered by occlusions and noises. By analyzing the overall strategy underlying the unsupervised methodology and the light field geometry implied in epipolar plane images (EPIs), we look beyond the photometric consistency assumption, and design an occlusion-aware unsupervised framework to deal with the situations of photometric consistency conflict. Specifically, we present a geometry-based light field occlusion modeling, which predicts a group of visibility masks and occlusion maps, respectively, by forward warping and backward EPI-line tracing. In order to learn better the noise- and occlusion-invariant representations of the light field, we propose two occlusion-aware unsupervised losses: occlusion-aware SSIM and statistics-based EPI loss. Experiment results demonstrate that our method can improve the estimation accuracy of light field depth over the occluded and noisy regions, and preserve the occlusion boundaries better.

Cylindrical aperture three-dimensional synthetic aperture imaging with pulsed terahertz waves.

In this paper, we report a three-dimensional synthetic aperture imaging method with pulsed terahertz waves realized by a terahertz time-domain spectrometer. In contrast to synthetic aperture imaging systems operating at microwave or millimeter-wave frequencies where the frequency of the transmitter is scanned in the frequency domain, in our imaging system, all the frequency components are contained in a single terahertz pulse that can be generated and detected by photoconductive antennas. The image algorithm was analyzed theoretically and confirmed numerically using the finite-difference time-domain method. A key with plentiful detailed structures was used as the object to be imaged to demonstrate the three-dimensional imaging capabilities of this method. The resolution of the imaging system is 0.3 mm for the linear dimension and 0.1 mm for the circular dimension, as tested by the experimental setup. Finally, an optically opaque plastic pen with and without the cartridge was imaged, and the shape and location of the cartridge could be observed from the reconstructed three-dimensional terahertz images, demonstrating the non-destructive evaluation capabilities of this imaging method. Benefiting from the improvements in the experimental setup in this study, the imaging speed was significantly improved compared with that of the step-by-step scanning method commonly used in terahertz imaging systems with a single transmitter/receiver pair. This imaging method avoids the image degradation caused by specular reflections in active quasi-optical focal plane imaging and the lack of semiconductor devices working at several THz frequencies for synthetic aperture imaging, and may be used for non-destructive evaluation of objects with complex surfaces and internal structures.

Lensless light-field imaging using LMI.

Light-field imaging is widely used in many fields, such as computer vision, graphics, and microscopy imaging, to record high-dimensional light information for abundant visual perception. However, light-field imaging systems generally have high system complexity and limited resolution. Over the last decades, lensless imaging systems have attracted tremendous attention to alleviate the restrictions of lens-based architectures. Despite their advantages, lensless light-field imaging introduces significant errors in light-field reconstruction. This paper introduces a novel, to our knowledge, light field moment imaging-based lensless imaging system (LMI-LIS) aiming to improve the quality of light-field reconstruction. The proposed approach first uses light field moment imaging (LMI) with a sinc angular distribution model of the light field to extract the encoded information of the scene for each sub-aperture area. Meanwhile, the corresponding sub-aperture point spread function is segmented from the system point spread function. Finally, sub-aperture images of the scene are reconstructed separately for each sub-aperture area. To evaluate the light-field reconstruction performance, the imaging quality and angular consistency of different lensless light-filed imaging methods are compared through digital refocusing, epipolar plane image, peak signal-to-noise ratio, and structural similarity index. Furthermore, the effectiveness of the proposed methodology is verified using experimental results and theoretical analysis. It is demonstrated that lensless light-field imaging using LMI and the sinc model of the angular distribution achieves high-quality sub-aperture images.

Phase imaging through a single multimode fiber.

Phase imaging techniques are pivotal for achieving high-contrast visualization of unstained biological specimens in vitro, which is typically not applicable in narrow spaces. Recently, multimode fiber (MMF) has shown promise in enabling high-resolution in vivo endoscopy in biological research. Herein, we introduce a novel, to the best of our knowledge, phase imaging microscopy technique employing a single multimode fiber, showcasing remarkable capabilities in high-contrast imaging and quantitative shape reconstruction through frequency-domain modulation. Our method, validated through comparisons with reflection and phase-contrast results, demonstrates exceptional ability in imaging diverse samples, including microspheres, semiconductor chips, and oral epithelial cells. Notably, the quantitative reconstruction of surface shape achieves a sensitivity of less than 100 nm, enabling the extraction of three-dimensional information from single focal plane images. Moreover, our technique excels in contrast enhancement and defocused background suppression, presenting a promising avenue for minimally invasive, high-contrast, label-free in vivo phase imaging.

Significant systematic bias of alpha angles measured on MRI compared to various radiographic views in patients with femoroacetabular impingement syndrome.

The aim of this study was to assess the inter-rater reproducibility and inter-method comparability of hip alpha angle measurements on magnetic resonance imaging (MRI)/magnetic resonance arthrography (MRA) and plain radiographs in patients with femoroacetabular impingement syndrome (FAIS). A cross-sectional study of patients who were diagnosed with symptomatic FAIS underwent preoperative MRI/MRA with axial oblique and/or radial plane imagingand had preoperative radiographs with anterior-posterior (AP), 45° Dunnand 90° Dunn views. Alpha angle measurements were performed independently by two musculoskeletal radiologists. Inter-rater reproducibility and inter-method comparability between MRI/MRA images and radiographic views were assessed using the intraclass correlation coefficient (ICC) with 95% confidence interval (CI). Ninety-seven patients were included of whom 93 (95.8%) received axial oblique plane images and 54 (55.6%) had radial plane MRI/MRA images. Inter-rater reproducibility was excellent (ICC > 0.9) for all planes on MRI/MRA and radiographs. MRI/MRA axial oblique images had poor (ICC 0.39, 95% CI [0.09, 0.59]), moderate (ICC 0.57, 95% CI [0.18, 0.75])and moderate (ICC 0.64, 95% CI [0.20, 0.81]) comparability with AP, 45° Dunnand 90° Dunn, respectively. MRI/MRA radial plane images had equivocal (0 included in all CIs) comparability with AP (ICC 0.66), 45° Dunn (ICC 0.35)and 90° Dunn (ICC 0.14) radiographs. On average, alpha angle measurements were significantly higher with radial images and lower with axial oblique images, when compared to all radiographic views (p < 0.05), except axial oblique versus 45° Dunn views, where angles measured on axial oblique were significantly larger. Alpha angle measurements taken on axial oblique MRI/MRA images show moderate comparability to radiographic 45° Dunnand 90° Dunn views despite negative bias to measurements taken on radiographic AP and 45° Dunn view. Larger alpha angles were appreciated on MRI/MRA radial and axial oblique views compared to radiographic views supporting the inclusion of MRI/MRA alpha angle measurements to properly identify deformity. Level II.

Decoupling of Phase and Amplitude Channels with a Terahertz Metasurface Toward High‐Security Image Hiding

AbstractSteganography technology which conceals a message in a carrier to make it invisible is critical for information security. Conventional optical image steganography using diffractive optical components or spatial light modulators suffers from less encoding channel and bulky volume. The emergence of multifunctional metasurface that can manipulate abundant physical dimensions of optical fields allows the multi‐channel image steganography in a compact volume. Here, the image hiding in a metasurface is demonstrated by modulating the amplitude, phase, and polarization states of terahertz (THz) waves completely. Especially, the phase channel can decouple from the amplitude channel based on a Fresnel‐diffraction‐based algorithm. By directly measuring the phase distribution using the homemade THz focal plane imaging system, the number of transmission channels can expand from N to 2N. As a proof of concept, it is shown that the secret images can encode in the phase channel and subsequently extract by using different keys, such as polarization states, detection distances, and its combinations. Moreover, different hiding strategies with different attacker behaviors are also demonstrated. The decoupling of the phase and amplitude channels with a single metasurface may open an avenue toward innovative optoelectronic devices for optical image steganography, data storage, and terahertz communication.

Ultrasonographic images and correspondence with real color sectioned images of the upper limb.

For basic training in ultrasonography (US), medical students and residents must learn cross-sectional anatomy. However, the present educational material is not sufficient to learn the sectional anatomy for US. This study aimed to provide a criterion for reading ambiguous structures on US images of upper limb through the sectioned images of Visible Korean. US images of the right arm of a volunteer were scanned (28 planes). For comparison with US images, the sectioned images of the right upper limb (24 bits color, 0.5mm intervals, 0.06mm × 0.06mm sized pixel) were used. After the volume model was constructed from the sectioned images using MRIcroGL, new sectioned images of 28 planes corresponding to the US images of 28 planes were created by adjusting the slope of the volume model. In all images, the anatomical terms of 59 structures from the shoulder to the fingers were annotated. In the atlas, which consists of 28 sets of US images and sectioned images of various slope planes, 59 structures of the shoulder, arm, elbow, wrist, palm, and fingers were observed in detail. We were able to interpret the ambiguous structures on the US images using the sectioned images with high resolution and actual color. Therefore, to learn the cross-sectional anatomy for US, the sectioned images from the Visible Korean project were deemed to be the suitable data because they contained all human gross anatomical information.

Three-dimensional computer holography based on two hybrid constraint iterative angular spectrum algorithms

A method for three-dimensional holographic image calculation based on angular spectrum layering is presented, which significantly reduces the noise resulting from image overlap during hologram reconstruction. In order to enhance the reconstruction quality, we proposed a two-hybrid constraint algorithm, which employs two parallel processing frameworks to allocate multiple plane images effectively. Additionally, by applying two different hybrid constraint factors, spatial resource allocation is utilized efficiently to mitigate the impact of axial inter-layer crosstalk noise. The numerical simulations and optical experiment results demonstrated that our method has successfully improved the reconstruction quality of holograms and proved its effectiveness and feasibility.

Prediction of midpalatal suture maturation stage based on transfer learning and enhanced vision transformer

BackgroundMaxillary expansion is an important treatment method for maxillary transverse hypoplasia. Different methods of maxillary expansion should be carried out depending on the midpalatal suture maturation levels, and the diagnosis was validated by palatal plane cone beam computed tomography (CBCT) images by orthodontists, while such a method suffered from low efficiency and strong subjectivity. This study develops and evaluates an enhanced vision transformer (ViT) to automatically classify CBCT images of midpalatal sutures with different maturation stages.MethodsIn recent years, the use of convolutional neural network (CNN) to classify images of midpalatal suture with different maturation stages has brought positive significance to the decision of the clinical maxillary expansion method. However, CNN cannot adequately learn the long-distance dependencies between images and features, which are also required for global recognition of midpalatal suture CBCT images. The Self-Attention of ViT has the function of capturing the relationship between long-distance pixels of the image. However, it lacks the inductive bias of CNN and needs more data training. To solve this problem, a CNN-enhanced ViT model based on transfer learning is proposed to classify midpalatal suture CBCT images. In this study, 2518 CBCT images of the palate plane are collected, and the images are divided into 1259 images as the training set, 506 images as the verification set, and 753 images as the test set. After the training set image preprocessing, the CNN-enhanced ViT model is trained and adjusted, and the generalization ability of the model is tested on the test set.ResultsThe classification accuracy of our proposed ViT model is 95.75%, and its Macro-averaging Area under the receiver operating characteristic Curve (AUC) and Micro-averaging AUC are 97.89% and 98.36% respectively on our data test set. The classification accuracy of the best performing CNN model EfficientnetV2_S was 93.76% on our data test set. The classification accuracy of the clinician is 89.10% on our data test set.ConclusionsThe experimental results show that this method can effectively complete CBCT images classification of midpalatal suture maturation stages, and the performance is better than a clinician. Therefore, the model can provide a valuable reference for orthodontists and assist them in making correct a diagnosis.

Effect of the Material Properties and Knee Position to the Bone Bruise Pattern in Skeletally Mature and Immature Subjects.

A bone bruise is generated by a bony collision that could occur when the ACL is injured, and its pattern supposedly depends on the injury mechanism and level of skeletal maturity. The objective of this study was to determine the effect of material properties and knee position on the bone bruise pattern in skeletally mature and immature subjects using finite element analysis. Finite element models were created from an MR image in the sagittal plane of a skeletally mature and immature male subject. The femur and tibia were collided at 2 m/s to simulate the impact and determine the maximum principal stress. The analysis was performed at 15, 30 and 45 degrees of knee flexion, and neutral, 10 mm anterior and posterior translated position at each flexion angle. Although high stress was distributed toward the metaphysis area in the mature model, the stress did not cross the growth plate in the immature model. The size of the stress area was larger in the mature model than those in the immature model. The location of the stress area was dependent on the joint position as well as Young's modulus of cartilage and trabecular bone. Thus, the bone bruise pattern was affected by the knee position and tissue quality. In conclusion, although the bone bruise distribution was generally called footprint of the injury, the combined evaluation of the quality of the structure and the bone bruise distribution is necessary for properly diagnosing tissue injury based on the MR imaging.

The Predictive Accuracy of Anogenital Distance and Genital Tubercle Angle for First-Trimester Fetal Sex Determination.

Early identification of fetal gender is crucial for managing gender-linked genetic disorders. This study aimed to evaluate the predictive performance of anogenital distance (AGD) and genital tubercle angle (GTA) for fetal sex determination during the first trimester. A multicenter retrospective cohort study was conducted on 312 fetal cases between 11 and 13 + 6 weeks of gestation from two tertiary hospitals. AGD and GTA measurements were taken from midsagittal plane images using ultrasound, with intra- and inter-reader reproducibility assessed. Binomial logistic regression and ROC curve analysis were employed to determine the diagnostic performance and optimal cutoff points. AGD had a mean of 7.16 mm in male fetuses and 4.42 mm in female fetuses, with a sensitivity of 88.8%, specificity of 94.4%, and an area under the ROC curve (AUC) of 0.931 (95% CI: 0.899-0.962) using 5.74 mm as a cutoff point. For GTA, the mean was 35.90 degrees in males and 21.57 degrees in females, with a sensitivity of 92%, specificity of 84.7%, and an AUC of 0.932 (95% CI: 0.904-0.961) using 28.32 degrees as a cutoff point. The reproducibility results were excellent for AGD (intra-operator ICC = 0.938, inter-operator ICC = 0.871) and moderate for GTA (intra-operator ICC = 0.895, inter-operator ICC = 0.695). The findings suggest that AGD and GTA are reliable markers for early fetal sex determination, with AGD showing higher reproducibility. The findings highlight the feasibility and accuracy of these non-invasive sonographic markers and their potential usefulness in guiding timely interventions and enhancing the management of gender-linked genetic conditions.

Spatial–angular–epipolar transformer for light field spatial and angular super-resolution

Transformer-based light field (LF) super-resolution (SR) methods have recently achieved significant performance improvements due to global feature modeling by self-attention mechanisms. However, as a method designed for natural language processing, 4D LFs are reshaped into 1D sequences with an immense set of tokens, which results in a quadratic computational complexity cost. In this paper, a spatial–angular–epipolar swin transformer (SAEST) is proposed for spatial and angular SR (SASR), which sufficiently extracts SR information in the spatial, angular, and epipolar domains using local self-attention with shifted windows. Specifically, in SAEST, a spatial swin transformer and an angular standard transformer are firstly cascaded to extract spatial and angular SR features, separately. Then, the extracted SR feature is reshaped into the epipolar plane image pattern and fed into an epipolar swin transformer to extract the spatial–angular correlation information. Finally, several SAEST blocks are cascaded in a Unet framework to extract multi-scale SR features for SASR. Experiment results indicate that SAEST is a fast transformer-based SASR method with less running time and GPU consumption and has outstanding performance on simulated and real-world public datasets.

Nonlinear mid-infrared meta-membranes.

Nanophotonic structures have shown promising routes to controlling and enhancing nonlinear optical processes at the nanoscale. However, most nonlinear nanostructures require a handling substrate, reducing their application scope. Due to the underwhelming heat dissipation, it has been a challenge to evaluate the nonlinear optical properties of free-standing nanostructures. Here, we overcome this challenge by performing shot-controlled fifth harmonic generation (FHG) measurements on a SiC meta-membrane - a free-standing transmission metasurface with pronounced optical resonances in the mid-infrared (λ res ≈ 4,000 nm). Back focal plane imaging of the FHG diffraction orders and rigorous finite-difference time-domain simulations reveal at least two orders of magnitude enhancement of the FHG from the meta-membrane, compared to the unstructured SiC film of the same thickness. Single-shot measurements of the meta-membrane with varying resonance positions reveal an unusual spectral behavior that we explain with Kerr-driven intensity-dependent resonance dynamics. This work paves the way for novel substrate-less nanophotonic architectures.

SuperBIT Superpressure Flight Instrument Overview and Performance: Near-diffraction-limited Astronomical Imaging from the Stratosphere

SuperBIT was a 0.5 m near-UV to near-infrared wide-field telescope that launched on a NASA superpressure balloon into the stratosphere from New Zealand for a 45-night flight. SuperBIT acquired multiband images of galaxy clusters to study the properties of dark matter using weak gravitational lensing. We provide an overview of the instrument and its various subsystems. We then present the instrument performance from the flight, including the telescope and image stabilization system, the optical system, the power system, and the thermal system. SuperBIT successfully met the instrument’s technical requirements, achieving a telescope pointing stability of 0.″34 ± 0.″10, a focal plane image stability of 0.″055 ± 0.″027, and a point-spread function FWHM of ∼0.″35 over 5-minute exposures throughout the 45-night flight. The telescope achieved a near-diffraction-limited point-spread function in all three science bands (u, b, and g). SuperBIT served as a pathfinder to the GigaBIT observatory, which will be a 1.34 m near-UV to near-infrared balloon-borne telescope.

The density of the inner cell mass is a new indicator of the quality of a human blastocyst: a valid supplement to the Gardner scoring system.

Can the density of the inner cell mass (ICM) be a new indicator of the quality of the human blastocyst? The densification index (DI) developed in this study can quantify ICM density and provide positive guidance for ploidy, pregnancy, and live birth. In evaluating the quality of ICM, reproductive care clinics still use size indicators without further evaluation. The main disadvantage of this current method is that the evaluation of blastocyst ICM is relatively rough and cannot meet the needs of clinical embryologists, especially when multiple blastocysts have the same ICM score, which makes them difficult to evaluate further. This observational study included data from 2272 blastocysts in 1991 frozen-thawed embryo transfer (FET) cycles between January 2018 to November 2021 and 1105 blastocysts in 430 preimplantation genetic testing cycles between January 2019 and February 2023. FET, ICSI, blastocyst culture, trophectoderm biopsy, time-lapse (TL) monitoring, and next-generation sequencing were performed. After preliminary sample size selection, the 11 focal plane images captured by the TL system were normalized and the spatial frequency was used to construct the DI of the ICM. This study successfully constructed a quantitative indicator DI that can reflect the degree of ICM density in terms of fusion and texture features. The higher the DI value, the better the density of the blastocyst ICM, and the higher the chances that the blastocyst was euploid (P < 0.001) and that pregnancy (P < 0.001) and live birth (P = 0.005) were reached. In blastocysts with ICM graded B and blastocysts graded 4BB, DI was also positively associated with ploidy, pregnancy, and live birth (P < 0.05). ROC analysis showed that combining the Gardner scoring system with DI can more effectively predict pregnancy and live births, when compared to using the Gardner scoring system alone. Accurate calculation of the DI value places high demands on image quality, requiring manual selection of the clearest focal plane and exposure control. Images with the ICM not completely within the field of view cannot be used. The association between the density of ICM and chromosomal mosaicism was not evaluated. The associations between the density of ICM and different assisted reproductive technologies and different culture conditions in embryo laboratories were also not evaluated. Prospective studies are needed to further investigate the impact of ICM density on clinical outcomes. ICM density assessment is a new direction in blastocyst assessment. This study explores new ways of assessing blastocyst ICM density and develops quantitative indicators and a corresponding qualitative evaluation scheme for ICM density. The DI of the blastocyst ICM developed in this study is easy to calculate and requires only TL equipment and image processing, providing positive guidance for clinical outcomes. The qualitative evaluation scheme of ICM density can assist embryologists without TL equipment to manually evaluate ICM density. ICM density is a simple indicator that can be used in practice and is a good complement to the blastocyst scoring systems currently used in most centers. This work was supported by the National Key Research & Development Program of China (2021YFC2700603). The authors report no financial or commercial conflicts of interest. N/A.

Patellar articular overlap is better associated with patellar alignment during weight-bearing than traditional measures of patellar height

BackgroundA consequence of a high riding patella is reduced osseous stability and malalignment of the patella (i.e., lateral patellar tilt and displacement). Although quantification of patellar height is a routine part of the radiographic examination of the patellofemoral joint, it is not clear which measure of patellar height is best associated with patella alignment. Hypothesis/PurposeTo determine if patellar articular overlap (PAO) is better associated with lateral patellar tilt and lateral patellar displacement compared to traditional measures of patellar height. Study Design: Cross-sectional. MethodsMagnetic resonance images were obtained from 50 female participants (21 with patellofemoral pain and 29 healthy controls) under loaded conditions (25–35% bodyweight) at 15–20 degrees of knee flexion. Measurements of lateral patellar tilt and displacement as well as the PAO, Insall-Salvati ratio (ISV), Caton Deschamps-index (CD-index), or the Blacburn Peel-index (BP-index) were obtained from sagittal and axial plane images. ResultsThe PAO was found to significantly correlated with lateral patellar tilt (r = −0.77, p < 0.001). In contrast, the ISV, CD-index, or the BP-index were not found to be associated with lateral patellar tilt (r = 0.13, p = 0.34; r = −0.14, p = 0.33; r = −0.08, p = 0.56, respectively). Both the PAO and ISV were found to be significantly correlated with lateral patellar displacement (r = −0.52, p < 0.001; r = 0.43, p = 0.002, respectively). Conversely, the CD-index and BP-index were not found to be associated with lateral patellar displacement (r = 0.03 p = 0.83; r = 0.05 p = 0.74, respectively). ConclusionOf the measures of patellar height evaluated, the PAO was found to provide the greatest association with lateral patellar tilt and displacement.

Second harmonic generation in monolithic gallium phosphide metasurfaces.

Gallium phosphide (GaP) offers unique opportunities for nonlinear and quantum nanophotonics due to its wide optical transparency range, high second-order nonlinear susceptibility, and the possibility to tailor the nonlinear response by a suitable choice of crystal orientation. However, the availability of single crystalline thin films of GaP on low index substrates, as typically required for nonlinear dielectric metasurfaces, is limited. Here we designed and experimentally realized monolithic GaP metasurfaces for enhanced and tailored second harmonic generation (SHG). We fabricated the metasurfaces from bulk (110) GaP wafers using electron-beam lithography and an optimized inductively coupled plasma etching process without a hard mask. SHG measurements showed a high NIR-to-visible conversion efficiency reaching up to 10-5, at the same level as typical values for thin-film-based metasurface designs based on III-V semiconductors. Furthermore, using nonlinear back-focal plane imaging, we showed that a significant fraction of the second harmonic was emitted into the zeroth diffraction order along the optical axis. Our results demonstrate that monolithic GaP metasurfaces are a simple and broadly accessible alternative to corresponding thin film designs for many applications in nonlinear nanophotonics.

Simultaneous Multifocal Plane Fourier Ptychographic Microscopy Utilizing a Standard RGB Camera.

Fourier ptychographic microscopy (FPM) is a computational imaging technology that can acquire high-resolution large-area images for applications ranging from biology to microelectronics. In this study, we utilize multifocal plane imaging to enhance the existing FPM technology. Using an RGB light emitting diode (LED) array to illuminate the sample, raw images are captured using a color camera. Then, exploiting the basic optical principle of wavelength-dependent focal length variation, three focal plane images are extracted from the raw image through simple R, G, and B channel separation. Herein, a single aspherical lens with a numerical aperture (NA) of 0.15 was used as the objective lens, and the illumination NA used for FPM image reconstruction was 0.08. Therefore, simultaneous multifocal plane FPM with a synthetic NA of 0.23 was achieved. The multifocal imaging performance of the enhanced FPM system was then evaluated by inspecting a transparent organic light-emitting diode (OLED) sample. The FPM system was able to simultaneously inspect the individual OLED pixels as well as the surface of the encapsulating glass substrate by separating R, G, and B channel images from the raw image, which was taken in one shot.