Ultra-wideband Planar Monopole Antenna Research Articles

Ultra Wideband Planar Monopole Antenna with Pair of C-Shaped Slots and T-Shaped Sleeve for Microwave Systems

This paper introduces a compact UWB planar monopole antenna for microwave imaging systems. An antenna consists of square shaped radiating patch with a couple of C shaped slots for exciting resonance. By introducing T shaped sleeves on the ground plane, wide impedance bandwidth is achieved in range of (3.6 - 12 GHz). The proposed antenna has compressed size having dimensions Ls× Ws× Hs mm3. By embedding C-shaped slots with varying dimensions on radiating patch additional resonance are excited which results better wide impedance bandwidth. Simulated results such as return loss, gain, radiation pattern authenticate the convenient antenna structure for different microwave imaging system applications.

Novel Compact UWB Planar Monopole Antenna Using a Ribbon-Shaped Slot

Ultra-Wideband (UWB) is a wireless communication technology that can be utilized for precise indoor positioning system. UWB is low power-consuming and resistant to complex multipath environments, thanks to a short pulse signal. Since the main desired characteristics of the UWB antennas for radio-frequency localization systems are wide bandwidth, omnidirectional radiation pattern, and low profile for simple integration with printed circuit boards, various planar monopole antennas for UWB applications were proposed to meet the requirements. In order to satisfy these conditions, in this paper, a novel compact UWB planar monopole antenna operating in 3.1 GHz – 10.8 GHz is designed on FR-4 substrate. The overall size of the antenna is 12.5 × 12.5 × 1 mm³, which is 0.129 λ₀ × 0.258 λ₀ × 0.01 λ₀ in free space at the lowest frequency. The transmission line is designed based on a coplanar waveguide with ground (CPWG) and vias in the CPWG are employed to eliminate non-radiating phenomenon at some specific frequencies. The shape of the radiator is modified from the hexagonal shape and a ribbon-shaped slot inside the radiator is adapted to improve the operating frequency range. The proposed UWB planar monopole antenna is fabricated and measured. The proposed antenna provides good antenna performance from 3.1 to 10.8 GHz and also the radiation patterns at various frequencies are omnidirectional pattern.

Super Compact UWB Monopole Antenna for Small IoT Devices

This article introduces a novel, ultrawideband (UWB) planar monopole antenna printed on Roger RT/5880 substrate in a compact size for small Internet of Things (IoT) applications. The total electrical dimensions of the proposed compact UWB antenna are 0.19 λo × 0.215 λo × 0.0196 λo with the overall physical sizes of 15 mm × 17 mm × 1.548 mm at the lower resonance frequency of 3.8 GHz. The planar monopole antenna is fed through the linearly tapered microstrip line on a partially structured ground plane to achieve optimum impedance matching for UWB operation. The proposed compact UWB antenna has an operation bandwidth of 9.53 GHz from 3.026 GHz up to 12.556 GHz at −10 dB return loss with a fractional bandwidth (FBW) of about 122%. The numerically computed and experimentally measured results agree well in between. A detailed time-domain analysis is additionally accomplished to verify the radiation efficiency of the proposed antenna design for the ultra-wideband signal propagation. The fabricated prototype of a compact UWB antenna exhibits an omnidirectional radiation pattern with the low peak measured gain required of 2.55 dBi at 10 GHz and promising radiation efficiency of 90%. The proposed compact planar antenna has technical potential to be utilized in UWB and IoT applications.

A Negative Index Nonagonal CSRR Metamaterial-Based Compact Flexible Planar Monopole Antenna for Ultrawideband Applications Using Viscose-Wool Felt.

In this paper, a compact textile ultrawideband (UWB) planar monopole antenna loaded with a metamaterial unit cell array (MTMUCA) structure with epsilon-negative (ENG) and near-zero refractive index (NZRI) properties is proposed. The proposed MTMUCA was constructed based on a combination of a rectangular- and a nonagonal-shaped unit cell. The size of the antenna was 0.825 λ0 × 0.75 λ0 × 0.075 λ0, whereas each MTMUCA was sized at 0.312 λ0 × 0.312 λ0, with respect to a free space wavelength of 7.5 GHz. The antenna was fabricated using viscose-wool felt due to its strong metal–polymer adhesion. A naturally available polymer, wool, and a human-made polymer, viscose, that was derived from regenerated cellulose fiber were used in the manufacturing of the adopted viscose-wool felt. The MTMUCA exhibits the characteristics of ENG, with a bandwidth (BW) of 11.68 GHz and an NZRI BW of 8.5 GHz. The MTMUCA was incorporated on the planar monopole to behave as a shunt LC resonator, and its working principles were described using an equivalent circuit. The results indicate a 10 dB impedance fractional bandwidth of 142% (from 2.55 to 15 GHz) in simulations, and 138.84% (from 2.63 to 14.57 GHz) in measurements obtained by the textile UWB antenna. A peak realized gain of 4.84 dBi and 4.4 dBi was achieved in simulations and measurements, respectively. A satisfactory agreement between simulations and experiments was achieved, indicating the potential of the proposed negative index metamaterial-based antenna for microwave applications.

Simple ultra-wide band antenna with double band rejection capability using double inclined elliptical split ring resonators

In this paper, CPW-Fed ultra wideband (UWB) planar monopole antenna loaded by double inclined elliptical split ring resonators (ESRRs) for double band-notch characteristics is introduced, examined, and fabricated. Two different ESRRs with different dimensions are printed in the antenna backside to notch two different frequencies in the UWB frequency range instead of using two ESRR pairs as usual. The ESRRs are then rotated and the corresponding return loss is studied. Different notch frequencies can be obtained by varying the ESRRs’ dimensions. Finite element method FEM and finite integration technique FIT are used to simulate the proposed structures through the usage of Ansys HFSS and CST MWS. Good agreement between both results has been obtained. Two different prototypes of the proposed antenna are fabricated and their reflection characteristics are measured. The first antenna is the UWB antenna with two straight ESRRs in which two notch frequencies at 5.3 GHz and 6.8 GHz have been obtained. The second antenna is the UWB antenna with two inclined ESRRs in which two notch frequencies at 5.1 GHz and 6.9 GHz have been obtained. In both cases, good agreement between simulated and measured results has been obtained and the discrepancies are due to fabrication and alignment errors. Also in both cases the proposed antennas notch WLAN and C-band wireless coexisted applications. A directive radiation pattern in E-plane and omnidirectional radiation patterns in the H-plane could be observed. Also the gain is suppressed in the notch frequencies in both cases. The group delay is nearly stable in the UWB frequency range, except at the notch frequencies, which is distorted sharply. So, the proposed antenna is a good candidate for the modern UWB systems.

A compact UWB antenna with dynamically switchable band-notched characteristic using broadband rectenna and DC-DC booster

AbstractIn this article, a dynamically switchable ultra-wideband (UWB) planar monopole antenna employing defected ground structure (DGS) with a folded stepped impedance resonator (SIR) that can operate as either a UWB mode or the single band-notched mode is introduced. The UWB monopole antenna contains a novel whirligig-shaped radiating patch and a chambered conductor as a partial ground plane. The switchable UWB antenna uses one PIN diode as switching elements in the DGS-SIR structure without any biasing network. When the state of diode is OFF, the planar monopole antenna changes to the UWB mode, and when the diode is turned ON, a frequency notch is created at 5–6 GHz. The state of diode is set to the “ON” state dynamically in the presence of a 5–6 GHz RF signal that is detected by using a wireless power management unit (PMU) that contains a broadband rectenna and a DC-DC passive booster. The rectenna consists of a novel cypress-shaped monopole antenna as a signal receiving part and two sub-rectifiers which are connected to a 3 dB branch-line coupler with a grounded isolation port. The antenna switches from UWB to single band-notched when an RF input signal (≥8.5 dBm) in the 5.25 GHz is sensed by the RF PMU with a conversion efficiency of 26% and DC output voltage of 0.36 V, and it fades immediately in real time when the external RF signal is eliminated. In the three-tone signals, the efficiency and input signal improvements are about 10% and −5.5 dBm in the low-power levels, especially, and so develop and enhance the performance of the dynamic reconfigurability.

Antenna Modeling Based on Two-Stage Gaussian Process Considering Sensitivity Information

For antenna modeling and optimization design, high-fidelity full-wave electromagnetic simulation software can generally be used to obtain training samples. However, this process takes a long time. To solve this problem, a two-stage Gaussian process (GP) considering electromagnetic sensitivity information is proposed. Based on the coarse grid and fine grid of electromagnetic simulation software, the first stage learns the mapping relationships of antenna performance and sensitivity of each parameter, simultaneously. In the second stage, the accurate surrogates are established based on the mapping relationships above obtained. Because the method in this study takes sensitivity information into consideration during the modeling process, it can better reflect the mapping relationship between antenna input and output, which can develop a more accurate surrogate model. The proposed two-stage GP surrogate model considering sensitivity information can significantly reduce the demand of high-fidelity training samples for modeling, and greatly save the simulation time of calling electromagnetic simulation software. Therefore, this method is more suitable for the problems of insufficient electromagnetic simulation samples. The proposed approach is evaluated by modeling and optimization of an inverted F antenna and an ultra-wideband planar monopole antenna. The results show that the method has high modeling accuracy with limited training samples given by high-fidelity electromagnetic simulation, which further verify its effectiveness and efficiency.

A miniaturized ultra‐wideband planar monopole antenna with L‐shaped ground plane stubs

This article presents a miniaturized ultra-wideband planar monopole antenna with an oval radiator. The proposed antenna is fed by a coplanar waveguide (CPW), and two L-shaped stubs are extended from the ground plane of the CPW. This presented antenna is able to produce resonances in the lower frequency band and realize better impedance matching performance in the middle and higher frequency bands with the aid of the L-shaped stubs. The antenna was built and tested. The total size of the proposed antenna is only 26 × 20 × 1.6 mm3. Its measured –10 dB impedance bandwidth is 10.1 GHz (3.1-13.2 GHz). The measured far-field radiation patterns are stable in the whole operating frequency band.

An UWB trapezoidal rings fractal monopole antenna with dual‐notch characteristics

An ultra-wideband planar fractal monopole antenna with dual-notch characteristics is presented in this article. The microstrip fed antenna consists of nested trapezoidal rings and defected ground plane. Measured results show that the proposed antenna operates with a 10 dB return loss bandwidth from 2.2 to 10.8 GHz with notch bands at (2500-2690) MHz and (3300-4200) MHz covering LTE 2500, WiMAX and part of C-band.

Planar UWB Monopole Antenna with Tri-Band Rejection Characteristics at 3.5/5.5/8 GHz

A triple band-notched ultrawide band (UWB) antenna is presented to avoid the interference of services working in the UWB band, such as WLAN, WiMAX and X-band satellite systems. The arc H-shaped slot on the radiating patch creates a low frequency notched band, while the other two band-notched bands are formed by cutting narrow slots on the ground plane. The presented antenna can operate on the ultrawide band efficiently and inhibit interference from three different kinds of narrow band communication systems. The simulation and measurement results show that the antenna has excellent band-notched function on the rejectband and almost omnidirectional radiation pattern on the passband.

Evaluation of a mushroom shape CPW-fed antenna with triple band-notched characteristics for UWB applications based on multiple attribute decision making

A CPW-fed ultra-wideband (UWB) planar monopole antenna with triple band-notched characteristics is presented in this paper. In addition, a prototype of the antenna was fabricated and its performance is approved experimentally. Three notched frequency bands are achieved by using a novel inverted V-shaped impedance resonator, two L-shaped open circuit stubs, and T-shaped tuning stub, three band-notched frequencies could be obtained in the WiMAX (3.3–3.6 GHz), WLAN (5.15–5.85 GHz), downlink of X-band satellite communication (7.25–7.75 GHz). Simulated and measurement results show that proposed antenna could perform 2.9–11 GHz (116%), defined by VSWR < 2. The proposed antenna has small size (20 × 20 × 1.6 mm3) with omnidirectional radiation pattern. Also, an evaluation is done based on analytical hierarchy process method for comparison the proposed monopole antenna with some previously presented UWB monopole antennas.

Compact Size Triple Notched-bands UWB Antenna with Sharp Band-Rejection Characteristics at WiMAX and WLAN Bands

In this paper, a compact triple band-notched Ultra Wideband (UWB) antenna with sharp band-elimination features and controlled notched bandwidths is proposed and discussed. The design is made up of a rectangular-shaped patch UWB planar monopole antenna with double collections of band-notched configurations. The band-notched configurations are involved to produce the desired lower and upper stop bands with good frequency selectivity and suitable stop bandwidths. The first notch is realized by using a C-shaped slot etched in the radiating patch in order to eliminate the interference at the WiMAX (3.4 - 3.8 GHz) applications. The second and the third notches are realized together by using a pair of U-shaped resonators that are located beside the feed line in both sides to eliminate the interference with the lower WLAN (5.15–5.35 GHz) and the higher WLAN (5.725–5.825GHz) bands. Additionally, the bandwidths of the lower and upper stop bands can be control separately by changing the parameters of the band-notched configurations. Furthermore, the suggested triple notched bands UWB antenna is optimized, fabricated, and measured for verification purposes. The measured results are close to the simulated ones.

Development of an ultra-wideband, stable and high-directive monopole disc antenna for radar-based microwave imaging of breast cancer

ABSTRACTRadar-based ultra-wideband (UWB) microwave imaging (MI) system has recently attracted considerable attention for detection of breast cancer at early stage. A key component of the system is the sensor (antenna) that is used to radiate and receive the UWB pulses. In this study, a compact-size, UWB, directive, and microstrip-fed planar circular disc monopole antenna (PCDMA) with modified L-shaped ground plane for the radar-based UWB MI system is developed. Analysis and the performance optimization of the proposed antenna are performed by HFSS software. In the development process of the antenna design, some modifications such as adjusting feed point, adding parasitic element, slot, notches are made on the conventional PCDMA to improve the bandwidth, directivity and half-power beamwidth (HPBW) of the antenna. After obtaining the optimum parameters, the proposed antenna is fabricated and then tested by using Vector Network Analyser. Impedance bandwidth of the designed antenna covers the broad frequency range of 3–10 GHz (108%) for Return Loss < –10 dB. The good stability of the directional radiation patterns is obtained in the 3–10 GHz. The direction of the maximum radiation moves from 32° to 54° and HPBW decreases from 56° to 30° through the frequency band. The directivity changes between 6.2 and 9.4 dB in the 3–10 GHz. Results confirm that the proposed antenna is suitable for using in radar-based UWB MI of the breast cancer.

A Planar UWB Antenna with Dual Band Rejection Capability Using Double Rotated ESRRs

In this paper, CPW-Fed ultra wideband (UWB) planar monopole antenna (PMA) loaded by double elliptical split ring resonators (ESRRs) for double band-notch characteristics is introduced and examined. Two different ESRRs with different dimensions are printed in the antenna backside to notch two different frequencies. The ESRRs are also rotated and the corresponding return loss effect is examined. Different notch frequencies can be obtained by varying the ESRRs, dimensions. Two single SRRs are used to notch two frequencies instead of using dual SRR pairs. Two notch frequencies at 5.2 GHz and 6.9 GHz has been obtained to notch WLAN and C-band wireless applications, respectively. A directive radiation pattern in E-plane and omnidirectional radiation patterns in the H-plane could be observed. Also the gain is suppressed in the notch frequencies. The group delay is nearly stable in the UWB frequency range, except at the notch frequencies, which is distorted sharply. So, the proposed antenna is a good candidate for the modern UWB systems. Finite element method FEM and finite integration technique FIT are used to simulate the proposed structures through the usage of Ansys HFSS and CST MWS. Very good agreement between both results has been obtained.

Compact frequency reconfigurable filtennas using varactor loaded T ‐shaped and H ‐shaped resonators for cognitive radio applications

In this study, novel compact filtennas with large tunable frequency band are proposed for cognitive radio (CR) applications. Tunability is achieved by integrating a tunable T-shaped and H-shaped bandpass filter with a planar ultra-wideband monopole antenna. The T-shaped filter consists of a microstrip resonator loaded with a stub. The H-shaped filter is composed of two connected microstrip resonators. The proposed tuning technique for both filters is based on centrally loading the stub and the H-shaped with only a single varactor for miniaturisation. Increasing the varactor capacitance results in decreasing the even resonant mode of the resonator without affecting the dominant odd mode. Measurements results show that the proposed T-shaped and H-shaped filtennas are capable of tuning over a wide operating band of 1.68 and 1.73 GHz covering continuous bands for CR communication with 32.9% frequency tuning range (TR) from 4.26 to 5.94 GHz and with 36.7% frequency TR from 3.85 to 5.58 GHz, respectively. Moreover, the radiation patterns are stable over the operating frequency ranges. The frequency characteristics and radiation performance are successfully optimised using 3D full-wave electromagnetic simulator. The fabricated designs are measured for verification purposes. Good agreements are found between simulated and measured results.

이중 슬리브를 갖는 직사각형 평면 모노폴 안테나 설계

In this paper, a wideband antenna accomplished by adding a double sleeve of a rectangular planar monopole structure is proposed. In order to impedance matching of proposed antenna, the antenna performance was improved by adding two gap sleeves and outer sleeve for double sleeve structure. HFSS simulator of ANSYS corp. was used in order to confirm the antenna parameter characteristic. According to the simulation results, the VSWR was less than 2 for the range of 2.5GHz~10.5GHz. The frequency bandwidth is 8GHz. The frequency range of the actual fabricated antenna was 2.92GHz~10.32GHz, the frequency bandwidth is 7.4GHz. The measured radiation pattern frequency is 3GHz, 6GHz and 9GHz. The results are similar with dipole antenna pattern in all frequency. The antenna size is . The utilization possibility of the ultra-wideband planar monopole antenna could be confirmed according to compare and analyze the simulation and measurement data.

A NEW COMPACT PRINTED TRIPLE BAND-NOTCHED UWB ANTENNA

A novel planar ultra-wideband (UWB) antenna with triple-notched bands using triple-mode stub loaded resonator (SLR) is presented in this paper. The basic UWB antenna consists of a circular- shaped radiating element, a 50 Ω microstrip feed line, and a partially truncated ground plane. Then, the resonance properties of the SLR are studied. Results reveal that the multiple-mode property of the SLR can be utilized in the UWB antenna design to achieve triple band-notched performance. To validate the design concept, a novel planar UWB monopole antenna with three notched bands respectively around the WiMAX band, WLAN band, and X-band satellite communication band is designed and fabricated. The results indicate that the proposed planar antenna not only retains an ultrawide bandwidth, but also owns triple band-rejections capability. The UWB antenna demonstrates omnidirectional radiation patterns across nearly whole operating bandwidth that is suitable for UWB communications.

DESIGN OF DUAL BAND-NOTCHED CPW-FED UWB PLANAR MONOPOLE ANTENNA USING MICROSTRIP RESONATORS

In this letter, a new coplanar waveguide (CPW) fed ultra-wideband (UWB) planar monopole antenna with dual band-reject characteristics is proposed. Two resonators of different lengths are employed at the bottom layer to create two notches at the frequency of interest. The proposed fabricated antenna works from 2.8 to 11.34 GHz with two notched bands which cover the WLAN (5.725– 5.825GHz) and ITU (8.025–8.4 GHz) bands. The proposed antenna is fabricated and measured for verification purposes. Good agreement between the measurement and simulation is found.

A Band-notched Ultra-wideband Compact Planar Monopole Antenna With U-shaped Parasitic Element

In this paper, we propose a compact ultra-wideband (UWB) planar monopole antenna with integrated band-notch filtering. The proposed antenna is composed of a rectangular radiating patch, partial ground plane and U-shaped parasitic element on the bottom plane of the antenna symmetrical to the radiating patch. The dimensions of parasitic element have been optimized to achieve band-notch filtering, in order to avoid IEEE 802.11a interference in the frequency range 5.15 to 5.825GHz. The proposed antenna is compact (19x16x1.6mm) and also achieves VSWR ≤ 2 for frequency ranging from 3 to 10.3GHz except for the band-notched frequency. High Frequency Structure Simulator has been used to simulate the proposed antenna and analyze its performance in terms of resonating frequency, VSWR, gain and radiation pattern. Dominant factors affecting the centre frequency and bandwidth of the notched-band are also investigated.

Design of a Triple Band-notched UWB Planar Monopole Antenna

In this paper, a novel design of a compact planar ultra wide band (UWB) monopole antenna with triple band notched characteristics has been presented. The antenna has a unique shape and has been fed through a 50 Ω microstrip feedline. The strength of the antenna lies in three band notched properties for WiMax system at 3.3 - 3.7 GHz, WLAN IEEE 802.11a at 5.15 - 5.85 GHz and X band satellite communication at 7.25 - 8.395 GHz. The notched bands have been achieved by incorporating an inverted U-slot etched on the radiator patch, an inverted C-slot also on the radiator patch and a U-slot on the microstrip feed line. In order to achieve FCC defined impedance bandwidth of 7.5 GHz, a rectangular cut in the ground plane has been introduced along with staircase structure in the bottom edge of the radiator. The proposed antenna is having a compact size of 30 X 30 X 1.6 mm3 and exhibits a large bandwidth from 2.8 GHz to 10.7 GHz. The antenna has been successfully simulated and fabricated. The radiation pattern is omni-directional in H-plane and the E-plane exhibits dipole like radiation pattern. The gain of the antenna is stable across the whole operating frequency band except at three notched bands.