Planar Cavity Research Articles

Determining the transfer function of a reconstructive spectrometer using measurements at two wavelengths.

The transfer function is the characteristic function of the dispersive element of a reconstructive spectrometer. It maps the transmitted spatial intensity profile to the incident spectral intensity profile of an input. Typically, a widely tunable and narrowband source is required to determine the transfer function across the entire operating wavelength range, which increases the developmental cost of these reconstructive spectrometers. In this Letter, we utilize the parabolic dispersion relation of a planar one-dimensional photonic crystal cavity, which acts as the dispersive element, to determine the entire transfer function of the spectrometer using measurements made at only two wavelengths. Using this approach, we demonstrate reliable reconstruction of input spectra in simulations, even in the presence of noise. The experimentally reconstructed spectra also follow the spectra measured using a commercial spectrometer.

Broadband and Spectrally Selective Photothermal Conversion through Nanocluster Assembly of Disordered Plasmonic Metasurfaces.

Plasmonic metasurfaces have been realized for efficient light absorption, thereby leading to photothermal conversion through nonradiative decay of plasmonic modes. However, current plasmonic metasurfaces suffer from inaccessible spectral ranges, costly and time-consuming nanolithographic top-down techniques for fabrication, and difficulty of scale-up. Here, we demonstrate a new type of disordered metasurface created by densely packing plasmonic nanoclusters of ultrasmall size on a planar optical cavity. The system either operates as a broadband absorber or offers a reconfigurable absorption band right across the visible region, resulting in continuous wavelength-tunable photothermal conversion. We further present a method to measure the temperature of plasmonic metasurfaces via surface-enhanced Raman spectroscopy (SERS), by incorporating single-walled carbon nanotubes (SWCNTs) as an SERS probe within the metasurfaces. Our disordered plasmonic system, generated by a bottom-up process, offers excellent performance and compatibility with efficient photothermal conversion. Moreover, it also provides a novel platform for various hot-electron and energy-harvesting functionalities.

Enhanced emission from hBN in sputtered microcavities.

In this observational study, we embed few-layer hexagonal boron nitride (hBN) inside a planar Fabry-Perot cavity fabricated using a pulsed DC magnetron sputtering system and show that the hBN retains its inherent visible range, defect-based luminescent properties following relatively energetic deposition processing. The observed surface-normal emission enhancement factor of ∼40 is in good agreement with theoretical predictions. We also found that embedded hBN subjected to a rapid thermal annealing treatment exhibits a cracking effect where the edges of the material glow distinctly brighter than adjacent regions. Our results might inform future efforts involving monolithic integration of hBN active layers.

Multispectral Imaging with a Planar Cavity-Type Metasurface for Optical Security.

Multispectral imaging refers to capturing images in different wavelength ranges across the electromagnetic spectrum. Despite the potential impact of multispectral imaging, its widespread use has been limited by the poor spectral selectivity of naturally occurring materials beyond the visible range. In this study, we present a multilayered planar cavity structure to simultaneously record mutually independent visible and infrared (IR) images on solid surfaces. The structure consists of a color control unit (CCU) and an emission control unit (ECU). The visible color of the cavity is controlled by varying the thickness of the CCU, whereas its IR emission is spatially tuned by the laser-induced phase change of a Ge2Sb2Te5 layer embedded in the ECU. Because the CCU comprises only IR lossless layers, its thickness variation has negligible influence on the emission profile. This enables different color and thermal images to be printed in a single structure. The cavity structure can be fabricated on flexible substrates (plastic and paper) as well as rigid bodies. Furthermore, the printed images remain stable against bending. This study shows that the proposed multispectral metasurface is highly promising for use in the field of optical security, such as identification, authentication, and anti-counterfeiting.

SIW‐backed multiplexing slot antenna for multiple wireless system integration

AbstractIn this letter, a planar cavity‐backed multiplexing antenna (SMA) is proposed and validated experimentally. A planar cavity is realized by using a novel transmission line known as substrate‐integrated waveguide (SIW) technology. The design comprises five SIW cavities and each one consisting of a slot for launching the energy in free space. Three different types of slots are employed for lower mutual coupling and compact circuit integration. The individual feeds are created in such a way, that antenna produces five distinct resonant frequencies in the dominant mode while maintaining sufficient mutual port isolation. Finally, the proposed concept is validated with experiments and results show acceptable agreement with the simulated counterparts. The design shows five operating frequency channels with center frequencies of 5.2, 5.5, 5.75, 6.2, and 6.8 GHz. The mutual isolation between any two radiating elements retains below −21 dB and the average gain of the antenna is better than 3.5 dBi at each resonant frequency. The proposed SMA element can be used to cover a wide range of wireless access points and seems suitable for multiple wireless system integration.

Cavity Quantum Electrodynamics with Hyperbolic van der Waals Materials.

The ground-state properties and excitation energies of a quantum emitter can be modified in the ultrastrong coupling regime of cavity quantum electrodynamics (QED) where the light-matter interaction strength becomes comparable to the cavity resonance frequency. Recent studies have started to explore the possibility of controlling an electronic material by embedding it in a cavity that confines electromagnetic fields in deep subwavelength scales. Currently, there is a strong interest in realizing ultrastrong-coupling cavity QED in the terahertz (THz) part of the spectrum, since most of the elementary excitations of quantum materials are in this frequency range. We propose and discuss a promising platform to achieve this goal based on a two-dimensional electronic material encapsulated by a planar cavity consisting of ultrathin polar van der Waals crystals. As a concrete setup, we show that nanometer-thick hexagonal boron nitride layers should allow one to reach the ultrastrong coupling regime for single-electron cyclotron resonance in a bilayer graphene. The proposed cavity platform can be realized by a wide variety of thin dielectric materials with hyperbolic dispersions. Consequently, van der Waals heterostructures hold the promise of becoming a versatile playground for exploring the ultrastrong-coupling physics of cavity QED materials.

Observation of Zitterbewegung in photonic microcavities

We present and experimentally study the effects of the photonic spin–orbit coupling on the real space propagation of polariton wavepackets in planar semiconductor microcavities and polaritonic analogues of graphene. In particular, we demonstrate the appearance of an analogue Zitterbewegung effect, a term which translates as ‘trembling motion’ in English, which was originally proposed for relativistic Dirac electrons and consisted of the oscillations of the centre of mass of a wavepacket in the direction perpendicular to its propagation. For a planar microcavity, we observe regular Zitterbewegung oscillations whose amplitude and period depend on the wavevector of the polaritons. We then extend these results to a honeycomb lattice of coupled microcavity resonators. Compared to the planar cavity, such lattices are inherently more tuneable and versatile, allowing simulation of the Hamiltonians of a wide range of important physical systems. We observe an oscillation pattern related to the presence of the spin-split Dirac cones in the dispersion. In both cases, the experimentally observed oscillations are in good agreement with theoretical modelling and independently measured bandstructure parameters, providing strong evidence for the observation of Zitterbewegung.

Multimode hybridizations in surface plasmon resonances excited in terahertz dipole cavities

Inventive design variations in subwavelength plasmonic structures can excite unconventional surface plasmon resonances (SPRs) that can enormously contribute to developing futuristic terahertz (THz) devices and components. Therefore, in this work, we demonstrate multimode resonance features in SPR characteristics through the introduction of split-ring resonators (SRRs) in plasmonic dipole cavities operating in the THz domain. Here, we propose a hybrid plasmonic system, where a single SRR is placed in the middle of a dipole cavity sustaining SPRs in the THz domain. Further, the SRR is displaced in orthogonal directions (horizontally as well as vertically) from the center of the cavity introducing asymmetry in the hybrid SRR–dipole cavity system. In such a way, introduced asymmetry resulted in diverse transmission responses with the realization of multiple SPR peaks. Such multi-SPR features are explicated using two-state and three-state mode hybridization schemes, which arise due to the near-field electric coupling between the SRR and the dipole cavity. Our findings based on multimode SPR characteristics excited in planar dipole cavities can contribute to realizing compact biosensor, absorber, and nonlinear THz devices operating simultaneously in multiple frequency bands.

Control, Modulation, and Analytical Descriptions of Vibrational Strong Coupling

Here, we review the design of optical cavities, transient and modulated responses, and theoretical models relevant to vibrational strong coupling (VSC). While planar Fabry-Perot cavities remain the most common choice for experiments involving vibrational polaritons, other choices including plasmonic and phononic nanostructures, extended lattice resonances, and wavelength-scale three-dimensionally confined dielectric cavities have unique advantages, which are discussed. Next, we review the nonlinear response to laser excitation of VSC systems revealed by transient pump-probe and 2DIR techniques. The assignment of various features observed in these experiments has been an important topic with significant recent progress and controversy. The modulation of VSC systems by various means such as ultrafast pulses and electrochemical methods is also described. Finally, theoretical approaches to understanding the physics and chemistry of VSC systems are reviewed with an eye toward their applicability and usefulness. These fall into two main categories: (1) solving for the eigenmodes of the system and (2) evolutionary techniques including the transfer-matrix method and its generalizations. The need for quantum optical methods of describing VSC systems is critically evaluated in light of current experimental work, and we discuss circumstances which necessitate consideration of the full in-plane dispersion of the Fabry-Perot cavities.

Mechanical scanning probe lithography of perovskites for fabrication of high-Q planar polaritonic cavities

Exciton–polaritons are unique quasiparticles with hybrid properties of an exciton and a photon, opening ways to realize ultrafast strongly nonlinear systems and inversion-free lasers based on Bose–Einstein polariton condensation. However, the real-world applications of polariton systems are still limited due to the temperature operation and costly fabrication techniques for both exciton materials and photon cavities. 2D perovskites represent one of the most prospective platforms for the realization of strong light-matter coupling since they support room-temperature exciton states with large oscillator strength and can simultaneously be used for fabrication of planar photon cavities with strong field localization due to the high refractive index of the material. In this work, we demonstrate the affordable mechanical scanning probe lithography method for research purposes and for the realization of room-temperature exciton–polariton systems based on 2D perovskite (PEA)2PbI4 with the Rabi splitting exceeding 200 meV. By the precise control of lithography parameters, we broadly adjust the exciton–polariton dispersion and, in particular, vary the radiative coupling of polaritonic modes to the free space. Our findings represent a versatile approach to fabrication of planar high-quality perovskite-based photonic cavities supporting the strong light-matter coupling regime for the development of on-chip all-optical active and nonlinear polaritonic devices.

Spin Pumping of Magnons Coherently Coupled to a Cavity Dark Mode

Cavity magnonics provides a versatile platform to tune the photon-magnon interaction bringing about promising applications for quantum information processing. Here, we implement a metamaterial planar cavity to suppress the radiative damping by engineering the symmetry of the cavity configuration. Then, the mode with suppressed radiative damping, i.e., dark mode, is coupled to the magnon mode in a thin yttrium iron garnet film ($5\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{m}$), which is detected by performing the reflection measurements and spin-pumping experiment. Pronounced anticrossing of the ferromagnetic resonance and the cavity dark mode is observed, where the largest coupling strength reaches 2.5% of the resonant cavity frequency. In addition, the spin wave resonances along the thickness direction are identified, which enhances the spin-pumping signal when they coalesce with the hybridized cavity-magnon-polariton mode. The dark mode excited by the planar metamaterial cavity leads to an improvement in the coherent manipulation of the spin current.

An ultra-broadband solar absorber based on α-GST/Fe metamaterials from visible light to mid-infrared.

In this paper, we proposed an ultra-broadband and high absorption rate absorber based on Fe materials. The proposed absorber consists of a rectangle pillar, two rings, a SiO2 film, a Ge2Sb2Te5(GST) planar cavity, an Fe mirror, and a SiO2 substrate. The average absorption reaches 98.45% in the range of 400-4597 nm. We investigate and analyze the electric field distributions. The analysis of the physical mechanism behind the broadband absorption effect reveals that it is driven by excited surface plasmons. Furthermore, the absorber can maintain high absorption efficiency under a large incident angle. The geometrical symmetric structure possesses polarization insensitivity properties. The proposed structure allows for certain manufacturing errors, which improves the feasibility of the actual manufacture. Then, we investigate the effect of different materials on absorption. Finally, we study the matching degree between the energy absorption spectrum and the standard solar spectrum under AM 1.5. The results reveal that the energy absorption spectrum matches well with the standard solar spectrum under AM 1.5 over the full range of 400 to 6000 nm. In contrast, energy loss can be negligible. The absorber possesses ultra-broadband perfect absorption, a high absorption rate, and a simple structure which is easy to manufacture. It has tremendous application potential in many areas, such as solar energy capture, thermal photovoltaics, terminal imaging, and other optoelectronic devices.

A Low-Cost 3-D Printed THz Open Resonator Antenna

We propose a design of an open resonator antenna to fulfill the requirements of high gain and low cost at 0.1 THz. A planar cavity with a loaded phase-shifting periodic structure is used to imitate a spherical cavity, which helps to support higher order modes and, hence, widen the bandwidth. The design procedure is introduced in detail. With the help of high-precision three-dimensional printing technology, the periodic structure can be manufactured with a relatively lower cost and complexity. Measurements were carried out to prove that the proposed antenna can achieve a 3 dB gain bandwidth of 13% and a peak gain over 16.8 dBi.

Wideband Polarization Independent Resonant Cavity Antenna for 6G Applications

In this paper, a planar polarization independent resonant cavity antenna (RCA) is proposed to achieve higher gain with a single patch connection instead of using antenna arrays with additional feeding losses. The planar metasurface is based on sub-wavelength complementary circular metallic patches, which provide the same magnitude and phase response for both TE and TM polarized waves. In order to excite the metasurface, an aperture coupled antenna with a circular patch is used to make its integration easier with the metasurface. The proposed antenna design works from 8.97 GHz to 13.1 GHz with a measured 3dB gain bandwidth of 24.2 % and it is used to increase the antenna’s gain from 8 dBi up to 14.67 dBi. The RCA achieves the measured bandwidths (input matching <-10 dB) above 4 GHz or 37.4 %, among the highest reported in the literature with 2 layers.

Derivation of the Transient and Steady Optical States from the Poles of the S‐Matrix

AbstractThe electromagnetic response of optical systems can be described by scattering operators, S, that link the incoming fields onto the system to the outgoing fields emerging from it. Considerable efforts have been devoted to retrieve the spectral response of the optical systems by expanding the S‐matrix in terms of its singularities. Here a planar optical cavity that allows to derive analytical expressions of poles (in the case of lossless materials) and residues, and reflection/transmission Fresnel coefficients in the harmonic domain is considered. This singularity expansion is used to derive the impulse response function (IRF) of the cavity with respect to the poles of the S‐matrix. The singular expression of the IRF consists of contributions oscillating at the excitation frequency and exponentially decaying contributions that impact signals only during the transient regimes. The convergence of this approach is thoroughly discussed in the case of a dispersive and metallic slab. The convergence is achieved by increasing the number of poles in the singularity expansion. It can also be achieved by considering only the poles within the spectral range of interest plus a fictive resonant term encapsulating the contribution of the singularities outside this spectral range.

Planar Optical Cavities Hybridized with Low-Dimensional Light-Emitting Materials.

Low-dimensional light-emitting materials have been actively investigated due to their unprecedented optical and optoelectronic properties that are not observed in their bulk forms. However, the emission from low-dimensional light-emitting materials is generally weak and difficult to use in nanophotonic devices without being amplified and engineered by optical cavities. Along with studies on various planar optical cavities over the last decade, the physics of cavity-emitter interactions as well as various integration methods are investigated deeply. These integrations not only enhance the light-matter interaction of the emitters, but also provide opportunities for realizing nanophotonic devices based on the new physics allowed by low-dimensional emitters. In this review, the fundamentals, strengths and weaknesses of various planar optical resonators are first provided. Then, commonly used low-dimensional light-emitting materials such as 0D emitters (quantum dots and upconversion nanoparticles) and 2D emitters (transition-metal dichalcogenide and hexagonal boron nitride) are discussed. The integration of these emitters and cavities and the expect interplay between them are explained in the following chapters. Finally, a comprehensive discussion and outlook of nanoscale cavity-emitter integrated systems is provided.

First Observation of New Flat Line Fano Profile via an X-Ray Planar Cavity.

A new Fano profile of a flat line is achieved experimentally by manipulating the relative amplitude of the continuum path, when q takes the pure imaginary number of -i in the x-ray regime. The underlying mechanism is that the interference term in the scattering will cancel the discrete term exactly. This new Fano profile renders only an observable continuum along with an invisible response to the discrete state of atomic resonance. The results suggest not only a different strategy to invisibility studies which provides a possible tool to identify weaker structures hidden by the strong white line, but also a new scenario to enrich the manipulations of two-path interference and nonlinear Fano resonance.

A Dual-Band Dual-Polarized SIW Cavity-Backed Antenna-Duplexer for Off-body communication

A novel dual-band, dual-polarized antenna-duplexer scheme is intended to use for WLAN 802.11a and ISM band applications using Substrate Integrated Waveguide (SIW) Technology. The antenna consists of two planar SIW cavities of different dimensions where a smaller sized diamond-shaped cavity is inserted inside the larger rectangular cavity to share the common aperture area. The diamond-ring shaped slots are etched in each cavity for radiation. The larger diamond-ring slot is excited with a microstrip feedline to operate at 5.2 GHz while the smaller slot is excited with a coaxial probe to operate at 5.8 GHz. The antenna produces linear polarization at 5.2 GHz (5.1–5.3 GHz) due to the merging of TE110 and TE120 cavity modes while circular polarization around 5.8 GHz due to orthogonally excited TM100 and TM010 modes (5.68–5.95 GHz). The slots are excited in an orthogonal fashion to maintain a better decoupling between the ports (i.e. –23 dB). The performance of the antenna has been verified in free space as well as in the vicinity of the human body. The antenna offers the gain of 6.2 dBi /6.6 dBi in free space and 5.8 dBi / 6.4 dBi on-body at lower-/ higher frequency-bands, respectively. Also, the specific absorption rate (SAR) is obtained<0.245 W/Kg for 0.5 W input power averaged over 10 mW/g mass of the tissue. The proposed design is a low-profile, compact single-layered design, which is a suitable option for off-body communication.

Planar High-Gain Millimeter-Wave Slotted SIW Cavity Antenna Array with Low Sidelobe and Grating Lobe Levels

In this paper, a planar high-gain millimeter-wave (mmW) slotted substrate integrated waveguide (SIW) cavity antenna array with low sidelobe and grating lobe levels is proposed. The antenna consists of a slotted SIW resonator and an SIW transmission line (TL). To achieve a high gain and simplify the structure of the antenna element, the slotted SIW cavity is resonated in high-order mode. Then, a high-gain antenna array is implemented with only four such elements. By analyzing the pattern multiplication principle of the antenna array and accurately adjusting the element spacing, the high grating lobe level caused by the large spacing of the high-order mode resonator is considerably reduced. In addition, a one-four unequal amplitude power divider is introduced to further reduce the antenna array’s sidelobe levels (SLLs). Finally, the proposed antenna array is fabricated for verification. The measured peak gain is 21.4 dBi at 27.3 GHz. The measured grating lobe level in the E-plane is reduced to −17.9 dB, and the measured SLLs are lower than −19.1 dB.

Room-temperature electrical control of polarization and emission angle in a cavity-integrated 2D pulsed LED

Devices based on two-dimensional (2D) semiconductors hold promise for the realization of compact and versatile on-chip interconnects between electrical and optical signals. Although light emitting diodes (LEDs) are fundamental building blocks for integrated photonics, the fabrication of light sources made of bulk materials on complementary metal-oxide-semiconductor (CMOS) circuits is challenging. While LEDs based on van der Waals heterostructures have been realized, the control of the emission properties necessary for information processing remains limited. Here, we show room-temperature electrical control of the location, directionality and polarization of light emitted from a 2D LED operating at MHz frequencies. We integrate the LED in a planar cavity to couple the polariton emission angle and polarization to the in-plane exciton momentum, controlled by a lateral voltage. These findings demonstrate the potential of TMDCs as fast, compact and tunable light sources, promising for the realization of electrically driven polariton lasers.