Plains Units Research Articles

Morphology and deformational history of Tellus Regio, Venus: Evidence for assembly and collision

Tessera terrain is the oldest stratigraphic unit on Venus, but its origin and evolution are inadequately understood. Here we have performed detailed mapping of Tellus Regio, the third largest tessera plateau on Venus. Tellus Regio is shown to have distinct marginal and interior facies. The east and west margins of Tellus rise up to 2 km above the interior and include ridges and troughs ∼5–20 km across, oriented parallel to the present plains-tessera boundary. Structures characteristic of the interior of Tellus are found within the eastern and western margins and are deformed by the margin-parallel ridges indicating their presence during the time of the formation of the current margins. These relationships suggest that the margins formed by the application of external horizontal compressional stresses at the edges of an already-existing tessera interior. Structural and stratigraphic relationships in southwest Tellus show the assembly of three structurally distinct tessera regions and intervening plains that are consistent with the collision of the southwest margin into the plateau interior. This requires that tessera terrain was formed regionally and collected into the present day Tellus plateau. The latest stages of activity in Tellus include volcanism and pervasive, distributed, 1–2 km wide graben, which may have been formed due to large-scale gravitational relaxation of the plateau topography. A large intratessera plains unit may have formed via crustal delamination. The collisional oroclinal deformation of the margins are most consistent with models that invoke mantle downwelling for the origin of Tellus Regio and other tessera plateaus with similar structural relationships.

Plateaus and sinuous ridges as the fingerprints of lava flow inflation in the Eastern Tharsis Plains of Mars

The Tharsis Montes rift aprons are composed of outpourings of lava from chaotic terrains to the northeast and southwest flank of each volcano. Sinuous and branching channel networks that are present on the rift aprons suggest the possibility of fluvial processes in their development, or erosion by rapidly emplaced lavas, but the style of lava flow emplacement throughout rift apron development is not clearly understood. To better characterize the style of lava emplacement and role of fluvial processes in rift apron development, we conducted morphological mapping of the Pavonis Mons southwest rift apron and the eastern Tharsis plains using images from the High Resolution Imaging Science Experiment (HiRISE), Mars Orbiter Camera (MOC), Context Camera (CTX), Thermal Emission Imaging System (THEMIS), and High Resolution Stereo Camera (HRSC) along with the Mars Orbiter Laser Altimeter (MOLA) Precision Experiment Data Records (PEDRs) and gridded data. Our approach was to: (1) search for depositional fans at the slope break between the rift apron and adjacent low slope plains; (2) determine if there is evidence that previously formed deposits might have been buried by plains units; (3) characterize the Tharsis plains morphologies east of Pavonis Mons; and (4) assess their relationship to the rift apron units. We have not identified topographically significant depositional fans, nor did we observe evidence to suggest that plains units have buried older rift apron units. Flow features associated with the rift apron are observed to continue across the slope break onto the plains. In this area, the plains are composed of a variety of small fissures and low shield vents around which broad channel-fed and tube-fed flows have been identified. We also find broad, flat-topped plateaus and sinuous ridges mixed among the channels, tubes and vents. Flat-topped plateaus and sinuous ridges are morphologies that are analogous to those observed on the coastal plain of Hawai‘i, where lava flows have advanced from the volcano's several degree flank onto the nearly zero degree coastal plain. When local volumetric flow rates are low, flow fronts tend to spread laterally and often thicken via endogenous growth, or inflation, of the sheet-like flow units. If flow advance is restricted by existing topography into narrow pathways, inflation can be focused into sinuous, elongate ridges. The presence of plateaus and ridges—emplaced from the rift zones, across the plains to the east of Pavonis Mons—and a lack of fan-like features, or evidence for their burial, are consistent with rift apron lavas crossing a slope break with low local volumetric flow rates that led to inflation of sheet-like and tube-fed lava flows.

Late movement of basin-edge lobate scarps on Mercury

Basin-edge lobate scarps are a sub-type of tectonic shortening structure on the surface of Mercury that have formed at the edge of volcanic units that fill or partly fill impact basins. We have performed a global survey of these features and find that they are widespread in basins across the planet. We obtained model ages from crater size–frequency distribution analysis for a subset of our surveyed basins, for both the smooth plains infill and for the last resolvable tectonic activity on the associated basin-edge scarps. Our results indicate that some of these lobate scarps were still accumulating strain in the late Mansurian (approximately 1Ga). From a photogeological assessment, we find that the orientations of these basin-edge lobate scarps are similar to those reported for the global population of lobate scarps in earlier studies, appearing to align ∼north–south at low latitudes and ∼east–west at higher latitudes. However, reassessing these landforms’ orientation with artificially illuminated topographic data does not allow us to rule out the effect of illumination bias. We propose that these landforms, the result of crustal shortening in response to global contraction, formed along the interface between the basin floor and the smooth plains unit, which acted as a mechanical discontinuity along which shortening strains were concentrated.

A sedimentary origin for intercrater plains north of the Hellas basin: Implications for climate conditions and erosion rates on early Mars

AbstractUnderstanding the origin (volcanic or sedimentary) and timing of intercrater plains is crucial for deciphering the geological evolution of Mars. We have produced a detailed geological map of the intercrater plains north of the Hellas basin, based on images from the Mars Express High‐Resolution Stereo Camera, the Mars Reconnaissance High‐Resolution Imaging Science Experiment, and Context. Erosional windows and fresh impact craters provide a way of studying the lithology of intercrater plain units. They are composed predominantly of light‐toned sedimentary rocks with subhorizontal bedding over a broad extent (greater than tens of kilometers), showing cross‐bedding stratifications locally. The broad extent, geometry, and flat topography of these sediments favor a formation by aqueous processes (alluvial and lacustrine) rather than airfall (eolian and volcaniclastic). The Late Noachian (~3.7 Ga) sedimentary plains are locally covered by dark‐toned, rough‐textured lava flows of Late Hesperian age (~3.3 Ga). Fe/Mg phyllosilicates were detected within sedimentary rocks, whereas volcanic rocks contain pyroxene and lack signatures of alteration, in agreement with interpretations made from texture and morphology. In erosional windows, the superimposition of sedimentary rocks by younger volcanic flows enables the estimation of an erosion rate of ~1000 nm yr−1 during the Hesperian period (3.3–3.7 Ga). Thus, our study shows that an intense sedimentary cycle occurred on the northern rim of the Hellas basin before and during the Late Noachian, leading to the formation of widespread sedimentary plains, which were then eroded, in agreement with a gradual change in the climatic conditions in this period, and later covered by volcanic flows.

Hubungan Kondisi Geologi Lingkungan dan Lapisan Pembawa Airtanah Daerah Kebakalan dan Sekitarnya, Kebumen - Jawa Tengah

Kebakalan and sorrounding included in area of Karangsambung Geological Natural Preservation (CAGK). As part of CAGK, geology Kebakalan and sorrounding area including Luk Ulo Melange Complex age Pre Tertiary expose in Java. These rocks are composed of scaly clay matrix with component in the form of block of igneous, sedimentary and metamorphic rocks. Many human activities is never separated from water using. These condition make that a region can maintain the quality and quantity of water resources. Avalaibility water resources of an area should be able to meet the water needs to water expected so balancing of two is happened. Rapid population growth in Kebakalan can increase needs for water resources for fullfillment of their needs. Water resources consist of surface and subsurface water (groundwater). The main purpose of these study is to determine the relationship between geology and groundwater conditions in Kebakalan and sorrounding an effort to overcome the droughts that frequently hit the area. The research method used two approaches that are primary and secondary data collection. The results showed there were eight units of geologic environments, in which two units are units hills sloping sandstone and alluvium plains unit is a good rock as aquifers. While the direction of groundwater flow from north to south with a depth of 4-8 m wells and groundwater levels 55-70 m. The villages that have potential for shallow ground water is Kedungnangka, Jambekerep, Jombor Kidul, Polaman, Panunggalan, Kebakalan and Gagakbaning with an area 462 ha (44%).

Potassium reserves in soils with arid and semi-arid climate in southern Iran: a perspective based on potassium fixation

ABSTRACT- The present research was conducted to study K forms and fixation in soils of southern Iran (Hormozgan Province) with aridic and aridic-ustic regimes and to address the relations between soil mineralogy and potassium forms. Thirteen surface soil samples (0-25 cm) were collected from different regions and analyzed in laboratory. Illite and feldspar and mica are the major clay and soil minerals for K reservoir, respectively. Mean of non-exchangeable, exchangeable and total content of K were equal to 31.3, 283.9 and 1080.6 mg kg-1 soils, respectively. These forms of K were abundant in plateau and piedmont plain physiographical unites while the greatest amount of soluble potassium was observed in flood and alluvial plain units. Despite the aridity of the region with low clay fraction and unlike the previous studies in calcareous arid soils of Iran, the amount of potassium fixation in soils was high, probably due to the predominance of micaceous minerals. In an adsorption experiment, the average K adsorption in soils was 71 percent after adding 1000 mg K kg-1. In general, the most active component in the K fixation was the silt fraction, dominated mica and illite. Potassium fixation boosted after increasing the wetting and drying cycles in relation to the samples that did not suffer these cycles.

The role of tectonics and climate in the late Quaternary evolution of a northern Amazonian River

The Amazon basin has most of the largest rivers of the world. However, works focusing the geological evolution of the trunk river or its tributaries have been only partly approached. The Branco River constitutes one of the main northern Amazonian tributaries. A previous work proposed that, before flowing southward into the Negro-Amazon Rivers, the Branco River had a southwest to northeast course into the Caribbean Sea. The present work aimed to establish if the proposed change in the course of this river is supported by morphological and sedimentological data. Other goals were to discuss the factors influencing river development and establish its evolution over time within the chronological framework provided by radiocarbon and optically stimulated luminescence dating. The work considered the entire course of the Branco River downstream of the Precambrian Guiana Shield, where the river presumably did not exist in ancient times. The river valley is incised into fluvial sedimentary units displaying ages between 100 and 250ky old, which record active and abandoned channels, crevasse splay/levees, and point bars. The sedimentary deposits in the valley include two alluvial plain units as old as 18.7ky and which intersects a Late Pleistocene residual megafan. These characteristics suggest that a long segment of the Branco River was established only a few thousand years ago. Together with several structural anomalies, these data are consistent with a mega-capture at the middle reach of this river due to tectonic reactivation in the Late Pleistocene. This integrated approach can be applied to other Amazonian tributaries to unravel how and when the Amazonian drainage basin became established.

Geology of the Victoria quadrangle (H02), Mercury

ABSTRACTMercury’s quadrangle H02 ‘Victoria’ is located in the planet’s northern hemisphere and lies between latitudes 22.5° N and 65° N, and between longitudes 270° E and 360° E. This quadrangle covers 6.5% of the planet’s surface with a total area of almost 5 million km2. Our 1:3,000,000-scale geologic map of the quadrangle was produced by photo-interpretation of remotely sensed orbital images captured by the MESSENGER spacecraft. Geologic contacts were drawn between 1:300,000 and 1:600,000 mapping scale and constitute the boundaries of intercrater, intermediate and smooth plains units; in addition, three morpho-stratigraphic classes of craters larger than 20 km were mapped. The geologic map reveals that this area is dominated by Intercrater Plains encompassing some almost-coeval, probably younger, Intermediate Plains patches and interrupted to the north-west, north-east and east by the Calorian Northern Smooth Plains. This map represents the first complete geologic survey of the Victoria quadrangle at this scale, and an improvement of the existing 1:5,000,000 Mariner 10-based map, which covers only 36% of the quadrangle.

Geology of the Raditladi quadrangle, Mercury (H04)

ABSTRACTIn this work, we present a 1:3,000,000-scale geologic map of the Raditladi quadrangle (H04) of Mercury. The area covers nearly 7% of the entire planet and encompasses several features of interest such as the Caloris basin, the Raditladi basin, hollow clusters and volcanic features. The mapping took advantage of the data produced during MESSENGER's orbital phase. The mapped deposits include impact-related units observed at several scales from the Caloris basin to the secondary crater chains. The Smooth Plains unit covers the majority of the area, mantling the older Intercrater Plains and Bright Intercrater Plains units. Results show that the emplacement of all the main units and the Caloris impact event, representing the main geologic events in the quadrangle, were concentrated between 3.96 and 3.72 Ga. After this intense phase, the geologic framework was modified only by local events such as impact craters and hollow formation. This map is among the first products for the detailed geologic characterization of Mercury at such a scale. It will contribute as a constraint and a support for both further local investigation and mapping, and targeting of the forthcoming BepiColombo ESA/JAXA joint exploration mission to Mercury.

Geomorphological map of the Afekan Crater region, Titan: Terrain relationships in the equatorial and mid-latitude regions

We carried out geomorphological mapping in a mid-latitude area surrounding the Afekan Crater region on Titan. We used Cassini RADAR (Synthetic Aperture Radar mode) data as the basemap, supplemented by Cassini RADAR microwave emissivity, Imaging Science Subsystem (ISS) infrared data, Visual and Infrared Mapping Spectrometer (VIMS) spectral images, and topography derived from Synthetic Aperture Radar (SAR). Mapping was done at a spatial scale of 300m/pixel, which corresponds to a map scale of 1:800,000. We describe multiple terrain units and their spatial relations. We describe five broad classes of units that are in agreement with previous mapping efforts: crater, labyrinth, hummocky/mountainous, plains, and dune terrain classes. We subdivide these into seven crater units, four hummocky/mountainous units, six plains units, and three dunes units. Our results show that plains are the dominant class of terrain unit in Titan’s mid latitudes. Of the plains units, the undifferentiated plains are the largest by total areal extent in the mapped region, accounting for over 45% of the mapped area. We developed a stratigraphic sequence that has the hummocky/mountainous and labyrinth terrains as the oldest units. The observed properties of the hummocky/mountainous terrain are consistent with fractured water ice materials, while the labyrinth terrains are consistent with organic materials. The youngest units are the dune units and streak-like plains units, with the undifferentiated plains units being of intermediate age. The microwave emissivity of the undifferentiated plains and dune units are consistent with organic materials. Given their properties and stratigraphic placement, we conclude that the hummocky/mountainous terrains are most consistent with the presumed crustal materials of Titan. The plains materials are consistent with deposits resulting from the transport and emplacement of organic-rich materials predominantly by aeolian mechanisms. Our geomorphological mapping results are consistent with the equatorial and mid-latitudes of Titan being dominated by organic materials that have been deposited and emplaced by aeolian activity.

Lava heating and loading of ice sheets on early Mars: Predictions for meltwater generation, groundwater recharge, and resulting landforms

Recent modeling studies of the early Mars climate predict a predominantly cold climate, characterized by the formation of regional ice sheets across the highland areas of Mars. Formation of the predicted “icy highlands” ice sheets is coincident with a peak in the volcanic flux of Mars involving the emplacement of the Late Noachian – Early Hesperian ridged plains unit. We explore the relationship between the predicted early Mars “icy highlands” ice sheets, and the extensive early flood volcanism to gain insight into the surface conditions prevalent during the Late Noachian to Early Hesperian transition period. Using Hesperia Planum as a type area, we develop an ice sheet lava heating and loading model. We quantitatively assess the thermal and melting processes involved in the lava heating and loading process following the chronological sequence of lava emplacement. We test a broad range of parameters to thoroughly constrain the lava heating and loading process and outline predictions for the formation of resulting geological features. We apply the theoretical model to a study area within the Hesperia Planum region and assess the observed geology against predictions derived from the ice sheet lava heating and loading model. Due to the highly cratered nature of the Noachian highlands terrain onto which the volcanic plains were emplaced, we predict highly asymmetrical lava loading conditions. Crater interiors are predicted to accumulate greater thicknesses of lava over more rapid timescales, while in the intercrater plains, lava accumulation occurs over longer timescales and does not reach great thicknesses. We find that top-down melting due to conductive heat transfer from supraglacial lava flows is generally limited when the emplaced lava flows are less than ∼10m thick, but is very significant at lava flow thicknesses of ∼100m or greater. We find that bottom-up cryosphere and ice sheet melting is most likely to occur within crater interiors where lavas accumulate to a sufficient thickness to raise the ice-melting isotherm to the base of the superposed lavas. In these locations, if lava accumulation occurs rapidly, bottom-up melting of the ice sheet can continue, or begin, after lava accumulation has completed in a process we term “deferred melting”. Subsurface mass loss through melting of the buried ice sheets is predicted to cause substantial subsidence in the superposed lavas, leading to the formation of associated collapse features including fracture systems, depressions, surface faulting and folding, wrinkle-ridge formation, and chaos terrain. In addition, if meltwater generated from the lava heating and loading process becomes trapped at the lava flow margins due to the presence of impermeable confining units, large highly pressurized episodic flooding events could occur. Examination of the study area reveals geological features which are generally consistent with those predicted to form as a result of the ice sheet lava heating and loading process, suggesting the presence of surface snow and ice during the Late Noachian to Early Hesperian period.

Groundwater Characterization of Cihaur Watershed Basin, Batujajar and Adjacent, West Bandung District, West Java, Indonesia

The study was conducted based on data from outcrop, well data, and springs with field orientation method assisted by the use of GPS and measurement tool physical and chemical properties of groundwater. Geological conditions investigated were geomorphology and stratigraphy, geomorphology unit study area consists of four units, namely geomorphology unit of strato volcano body, foot of strato volcano, intrusion units, and plains units and the river drainage patterns are parallel and subparallel. Stratigraphy in the study area are volcanic breccia (Qbv), Unit Andesite (Qa), Unit Tuff (Qtf) and Unit Clay Tuffan (Qlt). The characteristics of the groundwater of the study area are in form of the physico-chemical, major elements, and hydrolic parameter of the groundwater aquifers. From 27 locations, the water quality assesment by physico-chemical properties is classified as fresh water category and based on chemical major elements, has been classified 8 facies which are located in the study area. Then, there are two lithologies which act as aquifers ie, tuff and volcanic breccias. Conductivity values in the range of volcanic breccia aquifers respectively 0,128 m/day and 0,288 m/day, transmitivity (T) ranges respectively 1,9296 m2/day and 4,32 m2/day. The value of conductivity in tuff aquifer is 0,063 m/day, transmitivity (T) is 0,95 m2/day. While lithology Qlt (Clay tuffan) is lithology with very low productivity of groundwater or called groundwater rare area (akiclud) and the rock units Qa (Andesite) is a non-aquifer that is the absence of groundwater in these rock units (akifug).

Initial mapping of Mercury's crustal magnetic field: Relationship to the Caloris impact basin

AbstractSeventy‐eight low‐altitude passes of MErcury Surface, Space ENvironment, GEochemistry, and Ranging magnetometer data from August to September of 2014 have been applied to produce an approximate map of the crustal magnetic field at a constant altitude of 80 km covering latitudes of 50°–80°N and longitudes of 160°–330°E. The strongest anomalies are located in the westernmost part of the mapped region just north and northeast of the Caloris impact basin. The strongest single anomaly group lies over a smooth plains unit that extends northward from Caloris. A second anomaly lies on the Odin Formation, interpreted as primary Caloris ejecta. A third broad anomaly also lies over a smooth plains unit, Suisei Planitia. Although many smooth plains on Mercury may have a volcanic origin, a subset of these plains is concentrated around Caloris and could have a dominantly impact origin. It is therefore proposed that many of the Mercurian anomaly sources consist of impact basin ejecta materials.

Nature, distribution, and origin of Titan’s Undifferentiated Plains

The Undifferentiated Plains on Titan, first mapped by Lopes et al. (Lopes, R.M.C. et al., 2010. Icarus, 205, 540–588), are vast expanses of terrains that appear radar-dark and fairly uniform in Cassini Synthetic Aperture Radar (SAR) images. As a result, these terrains are often referred to as “blandlands”. While the interpretation of several other geologic units on Titan – such as dunes, lakes, and well-preserved impact craters – has been relatively straightforward, the origin of the Undifferentiated Plains has remained elusive. SAR images show that these “blandlands” are mostly found at mid-latitudes and appear relatively featureless at radar wavelengths, with no major topographic features. Their gradational boundaries and paucity of recognizable features in SAR data make geologic interpretation particularly challenging. We have mapped the distribution of these terrains using SAR swaths up to flyby T92 (July 2013), which cover >50% of Titan’s surface. We compared SAR images with other data sets where available, including topography derived from the SARTopo method and stereo DEMs, the response from RADAR radiometry, hyperspectral imaging data from Cassini’s Visual and Infrared Mapping Spectrometer (VIMS), and near infrared imaging from the Imaging Science Subsystem (ISS). We examined and evaluated different formation mechanisms, including (i) cryovolcanic origin, consisting of overlapping flows of low relief or (ii) sedimentary origins, resulting from fluvial/lacustrine or aeolian deposition, or accumulation of photolysis products created in the atmosphere. Our analysis indicates that the Undifferentiated Plains unit is consistent with a composition predominantly containing organic rather than icy materials and formed by depositional and/or sedimentary processes. We conclude that aeolian processes played a major part in the formation of the Undifferentiated Plains; however, other processes (fluvial, deposition of photolysis products) are likely to have contributed, possibly in differing proportions depending on location.

Photogeologic mapping and the geologic history of the Hellas basin floor, Mars

The Hellas basin on Mars is the second-largest topographically well-defined impact structure in the Solar System and has repeatedly been interpreted as a major sink of volcanic, glacio-fluvial and eolian materials. Based on established guidelines for planetary mapping, we compiled a comprehensive photogeological map of Hellas Planitia, i.e., the Hellas basin floor (1:2,000,000; ∼1.8×106km2; see Supplementary online material), using the Thermal Emission Imaging System (THEMIS-IR) day-time mosaic as basemap (supplemented by several other datasets). We identified 33 units, which were categorized into a “Rim Assemblage”, containing “Dissected units”, a “Layered rim sequence”, and “Other basin rim units”, as well as a “Floor Assemblage”, containing the “Honeycomb formation”, an “Interior formation”, and a “Plains sequence”. Relative dating of units was performed wherever contacts revealed stratigraphic relationships and was complemented by absolute model ages (AMAs) of all units that lend themselves to reliable crater-size frequency distribution (CSFDs) measurements. On the basis of our results, as well as AMAs of circum-Hellas volcanic provinces by previous authors, we compiled a chronostratigraphic model of the Hellas basin floor. The northern basin rim shows evidence (vast layered, hydrous mineral-bearing deposits containing meandering, channel-like valleys), that the early history of the basin until ∼3.8Ga ago experienced extended periods of low-energy fluvial, and possibly lacustrine, activity. Superposing the layered rim sequence, the majority of the Hellas basin infill (∼1.5–1.7×106km3) consists of volcanic material (a lower and an upper wrinkle-ridged plains unit), which was shortened by a compressive stress field relatively soon after its emplacement. Based on their ages and stratigraphic considerations, we identified Malea Patera (and possibly also Tyrrhena Patera) as a suitable source for the older, lower plains (∼3.8Ga), and Hadriaca and/or Amphitrites Paterae for the younger, upper plains (∼3.7Ga). Shortly after these volcanic episodes, the entire basin floor was covered by large amounts of deposits (>106km3) containing aqueously altered mafic materials. We interpret the deposits to have originated from Hesperia Planum and the Hesperia-Hellas trough, where they might have been removed by glacio-fluvial processes, which also sculpted the Hellas rim sections along northern Promethei Terra and Malea Planum around the same time. Such an apparent correlation between nearby volcanic activity and increased erosion/deposition is in agreement with previous models, which suggest outgassing by a maximum in global volcanism at that time caused warmer episodes enabling repeated subaerial water run-off. After the emplacement of these deposits, intense erosion, likely deflation along a rim-parallel annulus, began to exhume the outer parts of the wrinkle-ridged plains again, forming an interior formation of more elevated erosional remnants including the Alpheus Colles. Since ∼3.7Ga ago, fluvial activity of Dao/Niger and Harmakhis Valles dissected the eastern plains and emplaced pancake-shaped deposits in the basin center. Later, deflation and abrasion by katabatic winds moving through the Hellas basin in a clock-wise direction parallel to the basin floor outline carved out the northwestern Hellas Planitia trough (called Peneus Palus), possibly within a time span of few hundreds of Ma or less within the Amazonian. Being consistent with erosional patterns we observed within the basin, circulation models predict such winds to be ongoing today and might, thus, have recently exhumed the so called “honeycomb” formation on parts of Peneus Palus. This enigmatic, unique terrain was possibly formed by ductile deformation of pre-3.8Ga material and appears to be partially covered by another unique landform, the “banded terrain”. Although we cannot rule out that it is the surface expression of a thicker unit, the banded terrain might represent flows of volatile-rich airfall deposits emplaced along the edges of the Hellas wind alley by turbulent, marginal wind currents, which currently/recently prevail on both sides of the Hellas Planitia trough. In summary, our investigations enabled us to draw an updated, comprehensive and self-consistent picture of the geologic evolution of the Hellas basin floor, including volcanic, (peri-)glacial, fluvial and eolian processes, their possible interactions, and the implications on the climatic and geologic development of the circum-Hellas region and the entire planet.

Material transport map of Titan: The fate of dunes

Using SAR data from Cassini’s RADAR instrument, we examined the orientations of three terrain units on Titan, bright lineated plains, streak-like plains, and linear dunes. From the overall integrated pattern of their orientation, we were able to determine Titan’s global material transport vectors. The analysis indicates that, in both the northern and southern hemispheres, materials from 0 to 35 deg latitude are transported poleward to a belt centred at roughly 35 deg. Materials from 60 to 35 deg latitude are transported equatorward to the belt at roughly 35 deg. Comparison with the global topographical gradient (Lorenz, R.D. et al. [2013]. Icarus 225, 367–377) suggests that fluvial transport is not the dominant process for material transport on Titan, or that it is at least overprinted with another transport mechanism. Our results are consistent with aeolian transport being the dominant mechanism in the equatorial and mid-latitude zones.The zone at 35 deg is thus the ultimate sink for materials from the equator to low polar latitudes; materials making up the equatorial dunes will be transported to the latitude 35-deg belts. Only plains units are observed at latitudes of ∼35 deg; dunes and materials with the spectral characteristics of dunes are not observed at these latitudes. This observation suggests that either dune materials are converted or modified into plains units or that the margins of dunes are transport limited.

Extensive Middle Amazonian mantling of debris aprons and plains in Deuteronilus Mensae, Mars: Implications for the record of mid-latitude glaciation

The mid-latitudes of Mars are host to a record of recent episodes of accumulations of ice-rich materials. The record includes debris aprons, interpreted to be debris-covered glaciers, that may represent the preserved remnants of a much more extensive ice sheet. We assessed the possibility of former glacial extents by examining debris aprons and the surrounding plains in Deuteronilus Mensae. Geomorphic units and stratigraphic relationships were mapped and documented from Mars Reconnaissance Orbiter (MRO) Context (CTX) and High Resolution Imaging Science Experiment (HiRISE) camera images, and crater retention ages were estimated from crater size–frequency distributions. Three major units are observed within the study area: debris aprons, lower plains, and upper plains. Debris aprons exhibit characteristics typical for these features documented elsewhere and in previous studies, including integrated flow lineations and patterns, convex-upward profiles, and knobby and brain terrain surface textures. A lower bound on the age for debris aprons is estimated to be 0.9Ga. Debris aprons are superposed on a lower plains unit having a lower bound age of 3.3–3.5Ga. A 50–100m thick upper plains unit superposes both debris apron landforms and lower plains units and has a best-fit minimum age of 0.6Ga. The upper plains unit exhibits characteristics of atmospherically-emplaced mantle material, including fine-grained nature, sublimation textures, cyclic layering, draping character, and widespread spatial distribution. Fracturing and subsequent sublimation/erosion of upper plains on debris aprons has contributed to many of the surface textures on debris aprons. The upper plains unit has also been eroded from the lower plains and plateaus, evidenced by isolated blocks of upper plains in the interiors of craters and on the walls and tops of plateaus. While no conclusive evidence diagnostic of former cold-based ice sheets are observed in the plains within the study region, such landforms and units may have been poorly developed or absent, as is often the case on Earth, and would have been covered and reworked by later mantling episodes. These observations suggest that emplacement of thick ice-rich mantle deposits extended at least to near the Early/Middle Amazonian boundary and overlapped with the waning stages of glaciation in Deuteronilus Mensae.

Rembrandt impact basin: Distinguishing between volcanic and impact-produced plains on Mercury

The surface of Mercury has been heavily modified by impact cratering and volcanic plains since the initial formation of its lithosphere and crust. As in the case of the Moon, the origin of early plains deposits has been difficult to determine because ponded impact basin ejecta and impact melt deposits can mimic the topography and texture of extrusive volcanic plains. In order to understand better the role that impact basins play in resurfacing on Mercury, we used MESSENGER Mercury Dual Imaging System (MDIS) data to map the distribution of plains deposits within and around the relatively young Rembrandt impact basin (∼720km in diameter). There are two different Rembrandt plains units: (1) high-reflectance interior and exterior plains, and (2) low-reflectance exterior plains. The morphology, crater size–frequency distribution, and N(20) crater density values were analyzed for each deposit. Observations of the two high-reflectance plains deposits are consistent with previous studies of volcanically produced smooth plains on Mercury. The low-reflectance exterior plains are older than the other high-reflectance plains and comparable in age to the Rembrandt basin impact event. On the basis of age, areal distribution, and albedo relationships with basin materials, the low-reflectance plains are interpreted as basin impact melt deposits. The large areal extent of the low-reflectance plains suggests that basin impact melt deposits may have played an important role in resurfacing Mercury, especially during the early geologic history of the planet when impact rates were higher.

Orbital multispectral mapping of Mercury with the MESSENGER Mercury Dual Imaging System: Evidence for the origins of plains units and low-reflectance material

A principal data product from MESSENGER’s primary orbital mission at Mercury is a global multispectral map in eight visible to near-infrared colors, at an average pixel scale of 1km, acquired by the Mercury Dual Imaging System. The constituent images have been calibrated, photometrically corrected to a standard geometry, and map projected. Global analysis reveals no spectral units not seen during MESSENGER’s Mercury flybys and supports previous conclusions that most spectral variation is related to changes in spectral slope and reflectance between spectral end-member high-reflectance red plains (HRP) and low-reflectance material (LRM). Comparison of color properties of plains units mapped on the basis of morphology shows that the two largest unambiguously volcanic smooth plains deposits (the interior plains of Caloris and the northern plains) are close to HRP end members and have average color properties distinct from those of most other smooth plains and intercrater plains. In contrast, smaller deposits of smooth plains are nearly indistinguishable from intercrater plains on the basis of their range of color properties, consistent with the interpretation that intercrater plains are older equivalents of smooth plains. LRM having nearly the same reflectance is exposed in crater and basin ejecta of all ages, suggesting impact excavation from depth of material that is intrinsically dark or darkens very rapidly, rather than gradual darkening of exposed material purely by space weathering. A global search reveals no definitive absorptions attributable to Fe2+-containing silicates or to sulfides over regions 20km or more in horizontal extent, consistent with results from MESSENGER’s Mercury Atmospheric and Surface Composition Spectrometer. The only absorption-like feature identified is broad upward curvature of the spectrum centered near 600nm wavelength. The feature is strongest in freshly exposed LRM and weak or absent in older exposures of LRM. We modeled spectra of LRM as intimate mixtures of HRP with candidate low-reflectance phases having a similar 600-nm spectral feature, under the assumption that the grain size is 1μm or larger. Sulfides measured to date in the laboratory and coarse-grained iron are both too bright to produce LRM from HRP. Ilmenite is sufficiently dark but would require Ti abundances too high to be consistent with MESSENGER X-Ray Spectrometer measurements. Three phases or mixtures of phases that could be responsible for the low reflectance of LRM are consistent with our analyses. Graphite, in amounts consistent with upper limits from the Gamma-Ray Spectrometer, may be consistent with geochemical models of Mercury’s differentiation calling for a graphite-enriched primary flotation crust from an early magma ocean and impact mixing of that early crust before or during the late heavy bombardment (LHB) into material underlying the volcanic plains. The grain size of preexisting iron or iron sulfide could have been altered to a mix of nanophase and microphase grains by shock during those impacts, lowering reflectance. Alternatively, iron-bearing phases and carbon in a late-accreting carbonaceous veneer may have been stirred into the lower crust or upper mantle. Decoupling of variations in color from abundances of major elements probably results from the very low content and variation of Fe2+ in crustal silicates, such that reflectance is controlled instead by one or more minor opaque phases and the extent of space weathering.

Geochemical terranes of Mercury’s northern hemisphere as revealed by MESSENGER neutron measurements

The first map of variations in the abundances of thermal-neutron-absorbing elements across Mercury’s surface has been derived from measurements made with the anti-coincidence shield on MESSENGER’s Gamma-Ray Spectrometer (GRS). The results, which are limited to Mercury’s northern hemisphere, permit the identification of four major geochemical terranes at the 1000-km horizontal scale. The chemical properties of these regions are characterized from knowledge of neutron production physics coupled with elemental abundance measurements acquired by MESSENGER’s X-Ray Spectrometer (XRS) and GRS. The results indicate that the smooth plains interior to the Caloris basin have an elemental composition that is distinct from those of other volcanic plains units, suggesting that the parental magmas were partial melts from a chemically distinct portion of Mercury’s mantle. Mercury’s high-magnesium region, first recognized from XRS measurements, also contains high concentrations of unidentified neutron-absorbing elements. At latitudes north of ∼65°N, there is a region of high neutron absorption that corresponds closely to areas known to be enhanced in the moderately volatile lithophile elements Na, K, and Cl, and which has distinctly low Mg/Si ratios. The boundaries of this terrane differ from those of the northern volcanic plains, which constitute the largest geological unit in this region.