Pilot System Research Articles

Fluorescence sensor enabled control of contaminants of emerging concern in reclaimed wastewater using ozone-based treatment processes

Contaminants of emerging concern (CEC) pose significant challenges to environmental and human health. The development of the wastewater reuse sector, coupled with progressively stringent regulations, needs innovative systems that integrate advanced treatment processes with in-situ and real-time monitoring of CEC. This study investigates the use of a tryptophan-like fluorescence sensor for real-time and online monitoring of CEC within a pilot plant employing O3-based advanced oxidation processes (AOPs). Two tertiary wastewater effluents (WW-1 and WW-2) were tested, placing the pilot system downstream of two different wastewater treatment plants (WWTPs). Priority substances and micropollutants detected in the investigated water matrixes such as pharmaceuticals, per- and polyfluoroalkyl substances (PFAS) were selected as targeted compounds in this study. Fluorescence degradation was detected in real-time by the sensor, showing a high capability to detect fast changes in water quality induced by oxidation. Furthermore, the real-time fluorescence showed better sensitivity than lab-scale fluorescence in detecting the fast action of hydroxyl radicals (·OH) during the O3/H2O2 process, highlighting the importance of online monitoring. Selected CEC were degraded by AOPs with different percentages of removal efficiency (RE) (0%<RE<100% in WW-1 and 15%<RE<90% in WW-2) depending on oxidant doses and the reactivity of compounds with O3 and ·OH. Fluorescence data by online sensor enabled accurate prediction of the removal of a wide spectrum of CEC during O3 and O3/H2O2 processes (R2≥0.93). Furthermore, real-time fluorescence data were successfully used to predict observed pseudo-first-order rate constants of CEC with O3 or O3/H2O2. Obtained results suggest that real-time fluorescence monitoring is an excellent tool to control CEC removal during O3-based AOPs and monitor the transferred ozone in wastewater (R2≥0.94), contributing to the optimization of reagent dose, energy and costs.

Performance analysis of a pilot gasification system of biomass with stepwise intake of air-steam considering waste heat utilization

Although the fixed-bed gasifier is widely used because of their simple structure, easy operation, and strong adaptability to biomass type, its economy is weakened by their low bioenergy conversion ability and heat utilization efficiency. Therefore, a novel biomass gasifier with stepwise intake of air–steam is proposed, which also innovatively integrates the concept of multi-stage utilization of waste heat generated during the gasification process into its design. And a pilot system comprising the novel biomass gasifier with a biomass consumption of 30 kg/h has been built. A series of continuous air-steam gasification experiments on pine wood particles shown that, the high-temperature steam in the reduction zone enhanced the ring opening of aromatic hydrocarbons, decarboxylation, dehydroxylation, and the conversion of long-chain to short-chain hydrocarbons, thus increasing the yield of small-molecule gases. The steam reforming reaction played an active role in increasing the hydrogen content, the gasification gas's production and low calorific value. And the relationship among the reaction rates on the surface of char should be VC + H2O＞VC+2H2O＞VC + CO2＞VC+2H2. The minimum input temperature of steam was 350 °C, otherwise more char would be consumed in the oxidation zone to provide heat. The proposed steam-air gasification system achieved optimal performance with an air-to-steam mass ratio (A/S) of approximately 8, a steam temperature of 400 °C, and an air-to-biomass mass ratio (A/B) of 1.2. The average gas production could reach 2.67 m3/kg, with the average low calorific value of 5.1 MJ/m3. The average hydrogen content could reach 20 %, with the average H2/CO ratio of 2. The average effective gasification efficiency could reach 69.72 %. Compared with air gasification, the proposed air-steam gasification was equivalent to the use of 1 kWh of electricity to produce 2.4 kWh of electricity. Combining market research, the price of steam produced by the proposed system was approximately 70 CNY/t less than when using natural gas. This study aims to provide a technical reference for improving the performance of biomass gasification in practical applications.

Injury risks for different road users in Nepal: a secondary analysis of routinely collected crash data

Background Road traffic injuries are the 12th leading cause of mortality globally. Nepal, one of the least developed countries in the world, has a rapidly rising rate of road traffic-related morbidity and mortality. There is incomplete reporting of traffic crashes in Nepal in the last three World Health Organization global status reports on road safety. Together with poor-quality coding of crashes, essential information to inform prevention interventions or make international comparisons is lacking. Objectives The study aimed to critically analyse routinely collected traffic police data in Makwanpur district, Nepal, to identify the road user groups most likely to be involved and injured in traffic crashes in this part of the country. Design Secondary data analysis. Setting Makwanpur district, Nepal. Data sources Road traffic crash records from the District Traffic Police Office, Makwanpur, over 2 years (April 2017–March 2018 and May 2019–April 2020). Data were extracted from paper-based records onto an electronic database, and the data were analysed descriptively using the Statistical Package for the Social Sciences version 24.0 (IBM Corporation, USA). Results There were 291 crashes recorded in 2017–8 and 435 crashes in 2019–20. Two-wheeled vehicles (motorcycles/scooters) were the most frequently involved in police-reported crashes (35.5%). For most crashes (419/726, 58%), no cause was documented in the police record. Road users involved in crashes were mostly riders or passengers of motorised two-/three-wheelers (33.4%), four-wheeled vehicles (19.9%) or buses (16.7%). Of fatal injuries, 31.2% were riders or passengers of motorised two-/three-wheelers, and 24.8% were pedestrians. Limitations The data used represent crashes reported to the traffic police and therefore underestimate the true number of crashes and injuries. At the end of the second period of study, local movement restrictions associated with the COVID-19 pandemic lockdown limited the traffic on the roads, resulting in fewer crashes in March and April 2020. In most crash records, there were missing data, limiting the ability to determine contributory factors with confidence. Conclusion This study contributes to the evidence gap by describing crashes and mortality data by vehicle type and road user category. The findings suggest that the number and rates of crashes may be increasing over time. Action to improve the quality and completeness of data routinely collected by the traffic police is needed; a piloted web-based Road Accident Information Management System has the potential to support improved routine data collection. Future work The data indicate crashes occurring in one district over 2 years. To better understand the apparent increase in crashes, an analysis over a longer period, and over multiple districts, would be necessary. Funding This article presents independent research funded by the National Institute for Health and Care Research (NIHR) Global Health Research programme as award number 16/137/49.

Design and Implementation of a Research Data Chatbot Pilot System Based on sLLM - Focusing on the Pilot Implementation of Llama 3.1 Korean Localization -

Design and Implementation of a Research Data Chatbot Pilot System Based on sLLM - Focusing on the Pilot Implementation of Llama 3.1 Korean Localization -

Carbon-efficient Nutrients removal from real municipal wastewater under conditions of highly variable influent quality and low temperature

In order to maximize carbon efficient nutrient removal of real primary effluent under the conditions of highly variable influent quality and low temperature, this study integrated four advanced bioprocesses, namely partial nitrification, endogenous denitrification, partial denitrification-anammox, enhanced biological phosphorus removal, into one advanced pilot design. The pilot system has been on-site operated for 212 days and was able to handle highly variable conditions with the aid of automatic feedback and feedforward controllers nested in secondary and tertiary treatment. Comparing to the case when full nitrification and full dentification technologies had to be used to meet the effluent requirement of total inorganic nitrogen (TIN) ≤ 3 mg/L and orthophosphate phosphorus ≤ 0.1 mg/L, the pilot results showed that 100 wt% carbon and 55.5 wt% oxygen could be saved in the secondary process and another 45.2 wt% carbon could be saved in the tertiary process. 44.5 wt% influent TIN was removed through endogenous denitrification in the secondary treatment with another 39.5 wt% TIN polished by partial denitrification-anammox in tertiary treatment. Because post-anoxic endogenous denitrification has removed majority of the NOX-N, it was concluded that the energy intensive mixed liquor recirculation that has been popular in traditional design for pre-anoxic zone denitrification can be eliminated.

Effect of biomass concentration in membrane bioreactor design on alpha factor for two large pilot systems: Case study of mechanical surface aeration and air insufflation system

In the literature, the studies on wastewater treatment process have shown a great interest in aeration system, most of them were performed on small pilot lab-scale. However, it still an important need to provide useful information aiming at reducing the operating costs and providing decision support to choose aeration devices. Considering that membrane bioreactors operating with high biomass concentrations up to 20–30 g of suspended solids (SS) per liter, the present study was carried out on a larger pilot lab-scale ( ± 500 l) of insufflation system and mechanical surface aeration on the same fresh sludge with concentration varying between 4.6 and 19.8 g/l. The comparison with literature data shows good correspondence with values obtained with our insufflation system but a great difference from values obtained in a mechanical system. In addition, this research provides a better insight on the calculation method that can be used to estimate the critical parameters of the oxygen transfer, and analyses the feasibility of air diffusion substitution by surface aeration system of Louvain La Neuve wastewater treatment plant of 13000 population equivalent. This extrapolation proved that a saving of ± 50,000 € per year can be achieved by choosing surface aeration rather than aeration by air insufflation.

Removal of heavy metals from mine water using a hybrid electrocoagulation-ceramic membrane filtration process

Mining operations must account for increasingly stringent wastewater discharge limits for various contaminants, such as heavy metals and suspended solids. In the treatment of metal-bearing wastes, electrochemical processes, including electrocoagulation (EC), are gaining popularity. At large scales, EC processes can be hindered by considerable amounts of flocculants and by sedimentation tank sizes required to properly operate. This work sought to address these concerns by evaluating EC in mine water treatment using a pilot system coupled with ceramic membrane microfiltration (MF) and ultrafiltration (UF). The use of MF and UF after EC allows for the removal of suspended solids without needing a flocculation-sedimentation process. EC evaluation was performed using field samples of mine water from a North American concentrator. Under optimal conditions, EC removed over 95 % of Cr, Co, Cu, Fe, Mn, Ni, Pb, Ti and Zn from the mine water. Effluent from EC was used as feed in MF and UF processes with ceramic membranes. The tested membranes rejected 100 % of suspended solids from the EC effluent. Permeate from the membranes was free of solids and possessed turbidities of 0.05–0.15 NTU. Filtrate from the hybrid process satisfied environmental regulations for heavy metal concentrations, offering new opportunities for reuse or discharge. The hybrid process applied in this work can thus be used in mining operations to safely discharge their water, and/or to increase their water recirculation due to environmental concerns and water shortage.

Benchmarking produced water treatment strategies for non-toxic effluents: Integrating thermal distillation with granular activated carbon and zeolite post-treatment

The management of produced water (PW) generated during oil and gas operations requires effective treatment and comprehensive chemical and toxicological assessment to reduce the environmental risks associated with reuse or discharge. This study evaluated a treatment train that included a low-temperature thermal distillation pilot system followed by granular activated carbon (GAC) and zeolite post-treatment for processing hypersaline Permian Basin PW. Our study provides a unique and comprehensive assessment of the treatment efficiency considering a targeted chemical scheme together with whole effluent toxicity (WET) tests across four trophic levels regarding aquatic critical receptors of concern (ROC): Raphidocelis subcapitata, Vibrio fischeri, Ceriodaphnia dubia, and Danio rerio. The distillate from the thermal distillation process met various numeric discharge standards for salinity and major ions. However, it did not meet toxicity requirements established by the United States National Pollutant Discharge Elimination System program. Subsequent post-treatment using GAC and zeolite reduced the concentration of potential stressors, including volatile organics, NH3, Cd, Cr, Zn, and Mn in the final effluent to below detection limits. This resulted in a consistent toxicity reduction across all WET tests, with no observable adverse effects for R. subcapitata, C. dubia, and D. rerio (no observed effect concentration >100%), and V. fischeri effects reduced to 19%. This study realizes the feasibility of treating PW to non-toxic levels and meeting reuse and discharge requirements. It underscores the importance of implementing integrated treatment trains to remove the contaminants of concern and provides a systematic decision framework to predict and monitor environmental risks associated with PW reuse.

(Invited) Electrifying Sulfate Waste for Gigaton-Scale Carbon Capture and Valuable Product Synthesis

Travertine has developed an innovative process for gigaton-scale carbon capture and sequestration that leverages sulfate waste from the mining and fertilizer industries. alt-splitting electrolysis powered by renewable energy is used to convert sulfate waste and carbon dioxide into carbonate minerals and hydrogen gas at the cathode, and sulfuric acid at the anode. The resulting carbonate minerals serve as a sustainable precursor for green cement, while the sulfuric acid is employed to extract critical elements. An increased demand for critical elements over the next several decades (particularly for energy storage and fertilizer applications) will supply sufficient waste to permanently sequester CO2 at the gigaton per year scale. Notably, for every ton of sulfuric acid produced, 0.45 tons of CO2 are permanently sequestered as carbonate minerals. Travertine is currently designing a pilot system to capture 1 ton of CO2 per day, and the technology represents a transformative and economically viable solution to both climate change and resource sustainability.

Landfill leachate treatment by evaporation in open and closed systems under low temperature in southern Brazil

The leachate produced in landfills represents one of the main environmental risks. Among the main emerging techniques of leachate treatment is evaporation. The present study aimed to implement and monitor the performance of natural and forced evaporation technology in open and closed systems. The open pilot experiment system consisted of storage tanks, sprinklers and an evaporative panel, obtaining an average evaporation rate in the system of over 100 L.day−1. For the closed pilot system, different temperatures were combined with different air speeds, simulated by a fan. The results obtained during this operation ranged from 7.7 to 127.2 L.day−1 for the various climatic conditions simulated. In both experiments, wind speed proved to be the most significant climatic characteristic, followed by temperature. With regard to the dispersion of microorganisms in the air, both pilots showed a downward trend in colony-forming units (CFUs) as the distance increased. The volatile organic compound (VOCs) most likely to be present in the atmosphere surrounding the experiments were Dimethyl-Diazene, Tetramethyl-Silane, 2-Nitro-Propane, and 3-Methyl-Butanenitrile. The performance of leachate evaporation, which can be applied in various climatic conditions, leads to the conclusion that these techniques are a viable alternative to conventional landfill leachate treatment methods.

Rejection of PFAS and priority co-contaminants in semiconductor fabrication wastewater by nanofiltration membranes

Use of high-pressure membranes is an effective means for removal of per-and polyfluoroalkyl substances (PFAS) that is less sensitive than adsorption processes to variable water quality and specific PFAS structure. This study evaluated the use of nanofiltration (NF) membranes for the removal of PFAS and industry relevant co-contaminants in semiconductor fabrication (fab) wastewater. Initial experiments using a flat sheet filtration cell determined that the NF90 (tight NF) membrane provided superior performance compared to the NF270 (loose NF) membrane, with NF90 rejection values exceeding 97 % for all PFAS evaluated, including the ultrashort trifluoromethane sulfonic acid (TFMS). Cationic fab co-contaminants diaryliodonium (DIA), triphenylsulfonium (TPS), and tetramethylammonium hydroxide (TMAH) were not as highly rejected as anionic PFAS likely due to electrostatic effects. A spiral wound NF90 module was then used in a pilot system to treat a lab solution containing PFAS and co-contaminants and fab wastewater effluent. Treatment of the fab wastewater, containing high concentrations of perfluorocarboxylic acids (PFCAs), including trifluoroacetic acid (TFA: 96,413 ng/L), perfluoropropanoic acid (PFPrA: 11,796 ng/L), and perfluorobutanoic acid (PFBA: 504 ng/L), resulted in ≥92 % rejection of all PFAS while achieving 90 % water recovery in a semi-batch configuration. These findings demonstrate nanofiltration as a promising technology option for incorporation in treatment trains targeting PFAS removal from wastewater matrices.

Comprehensive study on pilot nitrification-sludge fermentation coupled denitrification system with extended sludge retention time

The sludge fermentation-coupled denitrification process, utilized for sludge reduction and nitrogen removal from wastewater, is frequently hindered by its hydrolysis step’s efficacy. This study addresses this limitation by extending the sludge retention time (SRT) to 120 days. As a result, the nitrate removal efficiency (NRE) of the nitrification-sludge fermentation coupled denitrification (NSFD) pilot system increased from 67.1 ± 0.2 % to 96.7 ± 0.1 %, and the sludge reduction efficiency (SRE) rose from 40.2 ± 0.5 % to 62.2 ± 0.9 %. Longer SRT enhanced predation and energy dissipation, reducing intact cells from 99.2 % to 78.0 % and decreasing particle size from 135.2 ± 4.6 μm and 19.4 ± 2.1 μm to 64.5 ± 3.5 μm and 15.5 ± 1.6 μm, respectively. It also created different niches by altering the biofilm’s adsorption capacity, with interactions between these niches driving improved performance. In conclusion, extending SRT optimized the microbial structure and enhanced the performance of the NSFD system.

A potential-driven FeMnOx/CNTs film electrode for efficient extraction of WO42- via electrochemical coordination and inner-sphere complexation

A film electrode materials of iron-manganese oxide composite carbon nanotubes (FeMnOx/CNTs) with dual adsorption sites was obtained by a co-precipitation method, which exhibited excellent selectivity of WO42- in an electrochemically switched ion exchange (ESIX) system. The main components of FeMnOx are MnOx and Fe(OH)3. In FeMnOx/CNTs composite film, Fe(OH)3 with abundant hydroxyl functional groups on its surface improved the ion storage capacity, while MnOx served as the main selective separation material to selectively adsorb the WO42-. A scalable ESIX pilot system was also designed to examine the effect of different operating conditions on system performance. The W(Ⅵ) adsorption capacity was as high as 187.76 mg/g and the separation factor of W/Mo was 21.03. Combining experimental characterization and results, it was confirmed that the highly efficient selective extraction of WO42- in neutral solution should be derived from the dual-site (i.e., electrochemical coordination sites on MnOx and electrochemically induced inner-sphere complexation sites on Fe(OH)3) adsorption. Hence, it is believed that such a novel electroactive FeMnOx/CNTs film electrode with dual adsorption sites could be a promising candidate for industrialized tungsten-molybdenum separation by ESIX technology.

AUTOMATED DRIVING SYSTEMS: COMPARISON OF TRAINING METHODS’ EFFECTIVENESS

The second decade of the 21st century saw the introduction of vehicles equipped with various driver assistance systems. However, the producers' plans go much further. In January 2023, Mercedes-Benz's DRIVE PILOT system was approved for use on public roads in Nevada (United States) as the first and so far only SAE Level 3 series-production solution. Despite increasing automation, the human factor remains important for the safety and efficiency of road transport. In the coming years, and possibly decades, this will mainly be due to the co-existence of vehicles with varying degrees of automation and necessary driver-vehicle interactions in cases where an automated driving system crosses the boundaries of the operational design domain. The latest research reveals the limitations of driving assistance systems, pointing not only to the need for changes in the technological domain but also to the need to pay more attention to the psychological aspects of using assistance systems in cognitive and behavioral areas. Therefore, an additional element of automation implementation should be considered, which is driver training focused on modern technological solutions. Properly arranged and conducted training can be treated as an additional factor facilitating the implementation of automated mobility. The article describes the methods of assessing the effectiveness of training in terms of familiarizing drivers with the functions that automate driving. The authors present the results of tests carried out on a driving simulator with an implemented Level 4 system (according to SAE classification). Three forms of knowledge transfer were analyzed: practical training, e-learning, and training with a short user manual. The results were compared in terms of driver-vehicle interaction effectiveness (e.g., system activation), ensuring that the driver is sufficiently reactive in dangerous situations and understands the limitations of the system. The research was conducted on a group of 81 drivers aged 18–65. Driver training was one of the main pillars of the Trustonomy project, which received funding from the EU research and innovation program Horizon 2020 under grant agreement No. 815003.

Microbial community dynamics in a two-stage treatment wetland: Insights from treating seasonal ski resort wastewater

Microbial community studies in treatment wetlands (TW) have not investigated cold-climate TW and have focused primarily on laboratory mesocosms. This study determined microbial community composition and dynamics using 16s rRNA sequencing in a partially-saturated two-stage, vertical-flow pilot TW treating ski resort wastewater from December–April. Indicator species analysis found organisms capable of the primary nitrogen transformations observed in each stage at 3 °C, with nitrifiers in the unsaturated second stage and heterotrophic denitrifiers in the first stage where recycled nitrate is removed. During seasonal TW operation, microbial communities developed significant differences between TW stages and α-diversity decreased. Microbial communities were compared to batch mesocosm TW communities, which were significantly different from the pilot. The study is the first to discern community dynamics and key microorganisms during seasonal loading of a cold-climate, field-scale TW. Results raise questions regarding comparability of mesocosms to pilot systems and indicate more field-scale TW investigations are needed.

Early Detection of Neurodevelopmental Disorders as a Strategy for Educational Inclusion in Early Childhood Education

ABSTRACT The objective of this study is to disseminate the results of a pilot system of early detection of neurodevelopmental disorders in early childhood education centres in Cartagena de Indias, Colombia. A total of 280 preschool children, their caregivers and teachers who were recruited from five early childhood education centres participated. Using a three-phase system for early detection of neurodevelopmental disorders, 15 cases were detected with delays in different developmental areas, with adequate levels of sensitivity and specificity. The phases of this system include: 1) Screening for risk of developmental delay, 2) In-depth developmental assessment of children at risk and specialised evaluation for suspected cases of neurodevelopmental disorder and 3) referral to specialised intervention and connecting children with special educational needs to educational inclusion strategy of their schools. A collaborative/interdisciplinary approach was used in which families played a crucial role. Once identified, students with neurodevelopmental disorders benefited from receiving the necessary support for their school progress through educational experiences that foster integrative development. This study provides evidence that supports the usefulness of detecting slow development early in childhood as a strategy to improve the life opportunities of children and encouraging educational inclusion in early childhood education.

In-situ direct seawater electrolysis using floating platform in ocean with uncontrollable wave motion

Direct hydrogen production from inexhaustible seawater using abundant offshore wind power offers a promising pathway for achieving a sustainable energy industry and fuel economy. Various direct seawater electrolysis methods have been demonstrated to be effective at the laboratory scale. However, larger-scale in situ demonstrations that are completely free of corrosion and side reactions in fluctuating oceans are lacking. Here, fluctuating conditions of the ocean were considered for the first time, and seawater electrolysis in wave motion environment was achieved. We present the successful scaling of a floating seawater electrolysis system that employed wind power in Xinghua Bay and the integration of a 1.2 Nm3 h−1-scale pilot system. Stable electrolysis operation was achieved for over 240 h with an electrolytic energy consumption of 5 kWh Nm−3 H2 and a high purity (>99.9%) of hydrogen under fluctuating ocean conditions (0~0.9 m wave height, 0~15 m s−1 wind speed), which is comparable to that during onshore water electrolysis. The concentration of impurity ions in the electrolyte was low and stable over a long period of time under complex and changing scenarios. We identified the technological challenges and performances of the key system components and examined the future outlook for this emerging technology.

Plasticulture film coextruded with essential oils: sustainable protection of salad crops

ABSTRACT Plasticulture has revolutionised Farming production. In salad cultivation, the snail is the main pest that can cause significant economic losses. The present study focuses on the design of a new industrial mulching material co-extruded separately with three essential oils: cade, turmeric and cumin oil. Experimental tests carried out on a pilot system confirmed the repellent effect against this mollusc and the protection of lettuce weight loss by about 30%. Adhesion tests by Escherichia coli and Pseudomonas aeruginosa demonstrate anti-adhesion properties of 80% when bioactive oils are incorporated into the industrial formulation of the plastic film. Application of the predictive theoretical approach confirms that the adhesion scores cannot be explained by the total adhesion energy and total hydrophobicity energy. This proves that these effects are the result of bioactive activity. This research work offers an innovative, practical and ecologically responsible alternative to protect lettuce crops against nuisances and pests.

Pilot-scale performance of gravity-driven ultra-high flux fabric membrane systems for removing small-sized microplastics in wastewater treatment plant effluents

The ubiquitous nature and environmental impacts of microplastic particles and fibers demand effective solutions to remove such micropollutants from sizable point sources, including wastewater treatment plants and road runoff facilities. While advanced methods, e.g., microfiltration and ultrafiltration, have shown high removal efficiencies of small-sized microplastics (<150 μm), the low flux encountered in these systems implies high operation costs and makes them less effective in high-capacity wastewater facilities. The issue presents new opportunities for developing cheap high-flux membrane systems, deployable in low-to high-income economies, to remove small-sized microplastic and nanoplastics in wastewater. Here, we report on developing an ultra-high flux gravity-driven fabric membrane system, assessed through a laboratory-scale filtration and large-scale performance in an actual wastewater treatment plant (WWTP). The method followed a carefully designed water sampling, pre-treatment protocol, and analytical measurements involving Fourier transform infrared (FTIR) spectroscopy and laser direct infrared (LDIR) imaging. The result shows that the ultra-high flux (permeance = 550,000 L/m2h⋅bar) fabric membrane system can effectively remove small-sized microplastics (10–300 μm) in the secondary effluent of an actual WWTP at high efficiency greater than 96 %. The pilot system demonstrated a continuous treatment capacity of 300,000 L/day through a 1 m2 surface area disc, with steady removal rates of microplastics. These findings demonstrate the practical, cheap, and sustainable removal of small-sized microplastics in wastewater treatment plants, and their potential value for other large-scale point sources, e.g., stormwater treatment facilities.

Zinc Recovery from a Water Supply by Reverse Osmosis Operated at Low Pressures: Looking for Sustainability in Water Treatment Advanced Processes.

Achieving sustainability in life involves increasing efforts to recover resources. This research proposes the recovery of Zn from the Milluni lagoons, an important water supply for Bolivia, where high concentrations of Zn have been identified that exceed permitted limits, exposing a risk to health and ecosystems. The application of reverse osmosis (RO), operated with low pressures, is proposed as a first stage for the concentration of Zn and subsequent recovery of this metal through chemical precipitation. The aim was to maintain the separation efficiency of the RO operated at low pressures without presenting operational problems. As a result, 98.83% metal concentration was achieved with a laboratory-scale pilot system. The above means an important potential for large-scale Zn concentration, apart from orienting the RO toward sustainability by working with low pressures that reduce energy costs during its operation. This study can be used as a valuable reference for the advancement of sustainable technologies in the field of water treatment that simultaneously allow the recovery of resources to promote a circular economy. Finally, this study exposes an alternative for regions with heavy metal water contamination in Bolivia and worldwide.