Physicochemical Characteristics Research Articles

Synthesis of mesoporous γ-alumina from a low-grade boehmite ore: Effect of thermal/chemical processing order on physico-chemical characteristics of adsorbent and regeneration of used transformer oils

Mesoporous γ-alumina adsorbents were synthesized from a low-grade boehmite ore, using the heat-treatment/acid-leaching (TC) and vice-versa (CT), under 400–600℃, 2–6 M HCl and H2SO4 solutions. The crystallinity of active species, morphology, elemental mapping, specific surface area, gravimetric phase changes, and chemical composition of the samples were characterized. The 0.50–1.00 mm γ-alumina prepared through heating, and followed by acid leaching with HCl (TC sample) presented mesoporous structure with the highest specific surface area of 245.802m2/g, pore volume 0.32773cm3/g, and average pore diameter of 44.3420A0. Using both CT and TC adsorbents, along with a commercial adsorbent, for the regeneration of used transformer oil, the TC adsorbent demonstrated the best performance, resulting in improved oil properties such as viscosity, interfacial tension, total acid number, dielectric dissipation factor, resistivity, and moisture content. Furthermore, the TC adsorbent was affected less by surface attrition and producing fine debris during recovery of oil compared to the commercial one.

CeO2 quantum dots through assisted-sol–gel methods: Syntheses, physicochemical characterization, and antibacterial studies

CeO2 quantum dots through assisted-sol–gel methods: Syntheses, physicochemical characterization, and antibacterial studies

Physicochemical Attributes and Dynamic-Mechanical Properties of a Traditional Himalayan Cheese – Kalari

ABSTRACT Kalari is a traditionally made Himalayan cheese. It is popular in the hilly belts of Jammu and Kashmir, India, and is also known as the “Mozzarella of Kashmir.” It is prepared from raw milk by natural acidification followed by heat coagulation. The present work aims to evaluate the physicochemical and rheological characteristics of Kalari and to gain insight into its composition and functional properties. Rheological characterization based on small amplitude oscillatory shear (SAOS) measurements reveals the cheese to be a viscoelastic material, with the elastic nature dominating viscous behavior at all test conditions. Temperature sweep and Arrhenius plot also enabled to identify rheological response of Kalari at elevated temperatures, which can further elucidate its functionality. Lower values of activation energy (39.57 KJ mol−1) and phase angle (28°) reiterate that the cheese does not flow extensively but undergoes softening and slight melting on exposure to high temperatures. Physicochemical characterization revealed the cheese to possess more protein (33.8% − 42.6%) and moisture (42.9% − 48.1%) than fat (7.5% − 11.9%).

Ice recrystallization inhibition activity of pulse protein hydrolysates after immobilized metal affinity separation

Creating molecules capable of inhibiting ice recrystallization is an active research area aiming to improve the freeze-thaw characteristics of foods and biomedical materials. Peptide mixtures have shown promise in preventing freezing-induced damage, but less is known about the relationship between their amino acid compositions and ice recrystallization inhibition (IRI) activities. In this article, we used Ni2+ immobilized metal affinity chromatography (IMAC) to fractionate pulse protein hydrolysates, created by Alcalase and trypsin, into mixtures lacking and enriched in His, and Cys residues. The aim of this study was to fractionate pulse protein hydrolysates based on their amino acid compositions and evaluate their resulting physicochemical and IRI characteristics. Ni2+ IMAC fractionation induced IRI activity in all of the evaluated soy, chickpea, and pea protein hydrolysates regardless of their amino acid composition. Ni2+ IMAC fractionation produced chemically distinct fractions of peptides, differing by their molecular weights, amino acid composition, and IRI activities. The resulting peptide mixtures' molecular weight, amino acid composition, secondary structure, and sodium ion levels were found to have no correlation with their IRI activities. Thus, we demonstrate for the first time the ability of Ni2+ IMAC fractionation to induce IRI activity in hydrolyzed pulse proteins.

Enhanced photocatalytic performance of rGO/UiO-66(Zr)/Ag3PO4 composite for degradation of methyl orange (MO) under visible light irradiation

Industries like textile, plastic, pulp, and paper produce dye-containing waste waters that have harmful effect on the environment as well as human health. This work presents a series of binary and ternary composites formed by reduced graphene oxide (rGO), silver phosphate (Ag3PO4) and the nanocrystalline MOF, UiO-66(Zr). The composites exhibit the best of their catalytic features to achieve efficient photocatalysis to remove the model dye methyl orange (MO) from aqueous solution as well as dyes from a real industrial wastewater effluent. The composites were prepared under sustainable conditions, at room temperature. XRD characterization shows that the prepared MOF is one of the most nanocrystalline reported UiO-66(Zr), becoming even more nanocrystalline in the composite formation. Different physicochemical characterization techniques indicated the existence of such interaction. Thus, DRS-UV-vis spectroscopy makes clear the reduction of the band-gap of the composites compared with the individual components; the band intensity of the photoluminescence (PL) spectra is substantially reduced in composites, confirming the diminution of electron-hole recombination; and electrochemical impedance spectroscopy (EIS) shows that the electrodes modified with ternary composites present faster electron transfer ability. The selected composite rGO/UiO-66(Zr)/Ag3PO4 exhibits high efficiency on the photodegradation of the model MO dye compared to the binary and single counterparts. It could be attributed to its high surface area, enhanced visible light absorption, efficient charge transfer process, as well as the synergetic effect between its components. A degradation mechanism is proposed based on the estimated band-gaps and on the scavenging study with strategically-chosen species.

Physico-chemical and bacteriological characteristics of well water in some selected residential areas within the Ajaokuta Housing Estate, Kogi State, Nigeria

Physico-chemical and bacteriological characteristics of well water in some selected residential areas within the Ajaokuta Housing Estate, Kogi State, Nigeria

Building Functional Liquid-Based Interfaces: From Mechanism to Application.

Functional liquid-based interfaces, with their inhomogeneous regions that emphasize the functionalized liquids, have attracted much interest as a versatile platform for a broad spectrum of applications, from chemical manufacturing to practical uses. These interfaces leverage the physicochemical characteristics of liquids, alongside dynamic behaviors induced by macroscopic wettability and microscopic molecular exchange balance, to allow for tailored properties within their functional structures. In this Minireview, we provide a foundational overview of these functional interfaces, based on the structural investigations and molecular mechanisms of interaction forces that directly modulate functionalities. Then, we discuss design strategies that have been employed in recent applications, and the crucial aspects that require focus. Finally, we highlight the current challenges in functional liquid-based interfaces and provide a perspective on future research directions.

Insight into antibacterial effect of titanium nanotubular surfaces with focus on Staphylococcus aureus and Pseudomonas aeruginosa

Materials used for orthopedic implants should not only have physical properties close to those of bones, durability and biocompatibility, but should also exhibit a sufficient degree of antibacterial functionality. Due to its excellent properties, titanium is still a widely used material for production of orthopedic implants, but the unmodified material exhibits poor antibacterial activity. In this work, the physicochemical characteristics, such as chemical composition, crystallinity, wettability, roughness, and release of Ti ions of the titanium surface modified with nanotubular layers were analyzed and its antibacterial activity against two biofilm-forming bacterial strains responsible for prosthetic joint infection (Staphylococcus aureus and Pseudomonas aeruginosa) was investigated. Electrochemical anodization (anodic oxidation) was used to prepare two types of nanotubular arrays with nanotubes differing in dimensions (with diameters of 73 and 118 nm and lengths of 572 and 343 nm, respectively). These two surface types showed similar chemistry, crystallinity, and surface energy. The surface with smaller nanotube diameter (TNT-73) but larger values of roughness parameters was more effective against S. aureus. For P. aeruginosa the sample with a larger nanotube diameter (TNT-118) had better antibacterial effect with proven cell lysis. Antibacterial properties of titanium nanotubular surfaces with potential in implantology, which in our previous work demonstrated a positive effect on the behavior of human gingival fibroblasts, were investigated in terms of surface parameters. The interplay between nanotube diameter and roughness appeared critical for the bacterial fate on nanotubular surfaces. The relationship of nanotube diameter, values of roughness parameters, and other surface properties to bacterial behavior is discussed in detail. The study is believed to shed more light on how nanotubular surface parameters and their interplay affect antibacterial activity.

Morpho-physiological and biochemical characterization of Kinnow (Citrus reticulata) in response to canker pathogens (Xanthomonas axonopodis pv. citri)

Fruits play an important role in human life on our planet, since they supply a variety of essential services. One of the paramount crops in Pakistan is Citrus reticulata (Kinnow), which plays a vital role in the country's economy. The citrus crops are confronted with various challenges such as fungi, bacteria, nematodes, and viruses, all of which have adverse effects on the quality and yield of the fruits. Citrus canker, in particular, stands as the most fatal disease, affecting numerous citrus species worldwide, inflicting devastating consequences. The objective of this study was to evaluate the impact of citrus canker on the morphology, physiology of leaves, and the quality of citrus fruits. The research was conducted in four major citrus-producing tehsils of the Sargodha district. The study found significant differences in morphological and physiological traits between healthy fruits and those infected with citrus canker. Healthy fruits exhibited higher values in fruit weight (FW) of 149.02 g, peel thickness (PT) of 3.76 g, rag weight (RW) of 35.95 g, leaf area (LA) of 22.49 cm2, and juice weight compared to the citrus canker-infected fruits. The significant variations in fruit weight, juice weight, chlorophyll content, vitamin C content were present between healthy and diseased fruits and leaves. A biochemical study revealed that healthy fruits had greater levels of total soluble solids (TSS), TSS-acid ratio, vitamin C, and reducing power (RP), but citrus canker-infected fruits had a higher acidity percentage. The significant decreases in important morphological and physicochemical characteristics, emphasizing the necessity for immediate disease control techniques to safeguard the citrus sector and maintain food security.

Bacterial nanocellulose by static, static intermittent fed-batch and rotary disc bioreactor-based fermentation routes using economical black tea broth medium: A comparative account

Bacterial nanocellulose was produced here using static, static intermittent-fed batch (SIFB) and rotary disc bioreactor (RDB) mode. Economical black tea broth media with symbiotic consortia of bacteria and yeast (SCOBY) was used towards feasible BNC production (instead of commercial NCIM 2526 strain and conventional HS media). The physicochemical characterization of BNC produced in all three modes via FE-SEM, ATR-FTIR, XRD and TGA results showed a highly porous morphology, mostly Iα form, good crystallinity and thermal stability, respectively. BNC crystallinity lies in the range of 68 % (RDB) to 79.4 % (static and SIFB). Water retention value (86 to 93 %) and moisture content (85 to 93 %) are high for BNC produced in all three modes. Commendable difference in the BNC yield, sugar consumption, conversion yield and residual sugar was observed using different methods. Highest BNC yield 29.4 ± 0.66 gL−1 was obtained under SIFB method as compared to static mode (13.6 ± 0.32 g L−1). Under RDB, a negligible amount of BNC i.e., 1.0 ± 0.2 g L−1 was produced. SCOBY with BTB medium was found unsuitable for BNC production under RDB and needs further investigation. Thus, this comparative study offers a way to produce a commendable amount of low-priced BNC for various techno-industrial usage.

Critical review of fluorescence and absorbance measurements as surrogates for the molecular weight and aromaticity of dissolved organic matter.

Dissolved organic matter (DOM) is ubiquitous in aquatic environments and challenging to characterize due to its heterogeneity. Optical measurements (i.e., absorbance and fluorescence spectroscopy) are popular characterization tools, because they are non-destructive, require small sample volumes, and are relatively inexpensive and more accessible compared to other techniques (e.g., high resolution mass spectrometry). To make inferences about DOM chemistry, optical surrogates have been derived from absorbance and fluorescence spectra to describe differences in spectral shape (e.g., E2:E3 ratio, spectral slope, fluorescence indices) or quantify carbon-normalized optical responses (e.g., specific absorbance (SUVA) or specific fluorescence intensity (SFI)). The most common interpretations relate these optical surrogates to DOM molecular weight or aromaticity. This critical review traces the genesis of each of these interpretations and, to the extent possible, discusses additional lines of evidence that have been developed since their inception using datasets comparing diverse DOM sources or strategic endmembers. This review draws several conclusions. More caution is needed to avoid presenting surrogates as specific to either molecular weight or aromaticity, as these physicochemical characteristics are often correlated or interdependent. Many surrogates are proposed using narrow contexts, such as fractionation of a limited number of samples or dependence on isolates. Further study is needed to determine if interpretations are generalizable to whole-waters. Lastly, there is a broad opportunity to identify why endmembers with low abundance of aromatic carbon (e.g., effluent organic matter, Antarctic lakes) often do not follow systematic trends with molecular weight or aromaticity as observed in endmembers from terrestrial environments with higher plant inputs.

Durability of partially cured GFRP reinforcing bars in alkaline environments with or without sustained tensile load

Corrosion of steel reinforcing bars (rebars) in reinforced concrete structures can be addressed by using corrosion-resistant materials like Fiber-Reinforced Polymers (FRP). However, in France, FRP rebars are primarily restricted to temporary applications due to lack of comprehensive durability data. While numerous studies have explored FRP durability in alkaline environments, understanding the combined effect of alkali ions and sustained loading remains limited. Furthermore, the impact of incomplete matrix curing on the long-term performance of FRP rebars is limited.Accordingly, this paper investigates the durability of Glass FRP (GFRP) rebars exposed to alkali environments at varying temperatures. A batch of partially cured rebars was selected for this study, with part of them undergoing post-curing to investigate the effect of curing state on the ageing behaviour. Additionally, some partially cured specimens were subjected to combined sustained tensile loading at 20 % and 40 % of ultimate strength. Mechanical, physico-chemical and microstructural characterizations were conducted after various exposure durations. Results revealed that incomplete curing minimally impacted long-term tensile properties but significantly affected the interlaminar shear strength of aged rebars. Moreover, applying a combined load had little influence on residual properties at 20°C but led to rapid reduction in GFRP residual tensile strength at higher ageing temperatures (40 and 60°C).

Effect of salting time and drying method on physicochemical characteristics of dried meat from the longissimus muscle of Algerian dromedary camels

The present study aims to evaluate the effects of a cold brine (4 °C) pre-treatment on the quality of camel meat. The studied parameters are moisture content, macronutrient composition, color, pH, and shrinkage, before and after drying. Five groups of 108 camel meat slices with dimensions of 100 ×20 x 4 mm (length x width x thickness) were constituted. The control group (group 1) received no treatment. Groups 2 and 3 were immersed for 30 and 90 minutes respectively in a 19 % sodium chloride solution at 4 °C, then sun-dried. As for groups 4 and 5, they were treated in the same way for 30 and 90 minutes, but oven-dried at 65 °C. Results demonstrate that increasing the soaking time reduced the drying duration from 20 to 16 hours for oven drying and 14–12 hours for sun drying. Moisture content decreased from 73.94±0.31 % to 13.33±0.15 %, while protein levels decreased from 75.76±0.04 % to 74.465±0.02 % and 74.97±0.04 % for oven drying and 74.25±0.07 % to 74.51±0.01 % for sun drying after 30 and 90 minutes of soaking, respectively. A decrease in lipid content from 21.65±0.04 % to 19.10±0.06 % and 19.14±0.08 % was also observed during oven drying and 19.33±0.07 % to 19.12±0.09 % for sun drying. Sodium levels increased from 260.47±1.46 mg/100 g to 1690.36±1.94–1712.11±5.14 mg/100 g for oven drying and 1704.48±7.16 mg/100 g - 1714.89±4.18 mg/100 g for sun drying. Longer soaking times increased total color variation for both drying methods. By using cold brine, the nutrients in the muscle slices are preserved and the final product is lower in salinity.

Enhancing therapeutic efficacy and safety profile of Favipiravir through noble metal loaded silica nanocomposites: A quantum chemical and molecular docking study for COVID-19 treatment

Favipiravir (FAV) a promising therapeutic candidate for addressing COVID-19, has attracted significant attention in recent times. In an attempt to optimize its delivery and minimize its toxicity, this investigation delves into the utilization of gold, silver, and platinum loaded silica nano composites as dopants with FAV molecule, which serves as nano structured materials. The main goal of this research is to augment the efficiency of drug delivery and concurrently diminish the harmful effects associated with FAV administration. To achieve this, the structural and physicochemical characteristics of the nano composites are meticulously evaluated with quantum chemical calculations. A theoretical prediction of the interaction dynamics between FAV and the nanocomposites is conducted. The adsorption energies computed in this investigation indicate that FAV exhibits a greater attraction towards the Au, Ag, and Pt loaded silica nano composites. By the utilization of Surface Enhanced Raman Spectroscopy (SERS), the adsorption behavior of FAV and its interaction with the nano composites were examined. The addition of nano composites onto the surface of FAV led to notable alterations in the energy level of the frontier molecular orbitals, thereby leading to a reduction in the energy gaps. The examination of druglikeness makes a valuable contribution to the advancement of medication protocols related to FAV and offer valuable understanding into the bioactivity. Molecular docking was conducted on both the molecule (FAV) and its derivatives doped with silica nano composites, and the results explored the manner in which FAV and its derivatives interacted with the designated proteins. Overall, these findings proposed that the Au, Ag, and Pt loaded silica nano composites are efficient aspirants for the development of the FAV anti-COVID-19 drug delivery process.

Production and physico-chemical characterization of nano-sized collagen from equine tendon

In recent years, significant academic and commercial interest has focused on collagen derived from horse tendons, with potential applications across diverse sectors such as medicine, pharmaceuticals, and cosmetics. Nano collagen, with its enhanced wound penetration, improved cell contact, and heightened cellular regeneration and repair capabilities due to its high surface area, holds promise for a wide range of applications. In this study, we present a novel method for producing nano collagen from the equine tendon. Our approach is characterized by its speed, affordability, simplicity and environmentally friendly nature, with precise temperature-control to prevent collagen denaturation. We conducted a comprehensive characterization of the obtained samples, including assessments of morphology, chemical and thermal properties, particle size distribution and biocompatibility. Importantly, our results indicate improvements in thermal stability, and surface roughness of nano collagen, while preserving its molecular weight. These advancements expand the potential applications of nano collagen in various fields.

Enhanced electrochemical performance of NiMn layered double hydroxides/graphene oxide composites synthesized by one-step hydrothermal method for supercapacitors.

This study aims to enhance the performance of supercapacitors, focusing particularly on optimizing electrode materials. While pure NiMn layered double hydroxides (LDHs) exhibit excellent electrochemical properties, they have limitations in achieving high specific capacitance. Therefore, this paper successfully synthesized composite materials of NiMn LDHs with varying loadings of graphene oxide (GO) using a hydrothermal method. Systematic physicochemical characterization of the synthesized materials, such as powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), and Raman spectroscopy, revealed the influence of GO doping on the microstructure and electrochemical performance of NiMn LDHs. Electrochemical tests demonstrated that the NiMn LDHs/GO electrode material exhibited optimal electrochemical performance with a specific capacitance of 2096 F g-1 at 1 A g-1 current density and 1471 F g-1 at 10 A g-1, when GO doping level was 0.45 wt%. Furthermore, after 1000 cycles of stability testing, the material retained 53.3% capacitance at 5 A g-1, indicating good cyclic stability. This study not only provides new directions for research on supercapacitor electrode materials but also offers new strategies for developing low-cost and efficient electrode materials.

Physicochemical characteristics of Pangasius sp. skin-gelatin-based-edible film enriched with silver nanoparticles

Background: Edible films intended for food packaging have been produced from hydrocolloids, lipids, resins, and composites, including gelatin. Gelatin is known to have a good filming ability and has been suggested as an alternative to non-biodegradable plastics. Naturally active compounds incorporated into film packaging may not only protect the food product from oxidation and microbial contamination, but they may also alter the physicochemical properties of the film. Silver nanoparticles have been used in food packaging as active agents due to their antibacterial and antifungal properties. The addition may affect the characteristics of the packaging. Therefore, this study aims to determine the effect of the addition of silver nanoparticles on the physicochemical characteristics of edible film from Pangasius sp. skin gelatin. Methods: Mangrove extract of Bruguiera gymnorrhiza was used to synthesize silver into nanoparticle size. In this study, silver nanoparticles (AgNPs) with different concentrations (0, 2, 4 and 8%) were added into gelatin-based edible film. The edible films produced were observed for their physicochemical characteristics, including thickness, tensile strength, elongation, water vapour transmission, moisture content, pH, and colour. Results: AgNPs affected the colour of the fish-gelatin-based edible film, as an increased concentration of AgNPs resulted in a darker film. Nevertheless, the addition of AgNPs showed no significant effect on the thickness (145–216 µm), tensile strength (14.58–19.72 MPa), elongation (21.86–54.19%), water vapour transmission (30.91–42.55 g/m2/day), moisture content (9.57–11.16%) or pH (5.92–6.01) of the fish-gelatin-based edible film. Conclusions: The addition of AgNPs has no significant effect on gelatin-based edible film physicochemical properties except colour. Therefore, the incorporated edible film has the potential to be developed further.

Plastic-degrading microbial communities reveal novel microorganisms, pathways, and biocatalysts for polymer degradation and bioplastic production

Plastics derived from fossil fuels are used ubiquitously owing to their exceptional physicochemical characteristics. However, the extensive and short-term use of plastics has caused environmental challenges. The biotechnological plastic conversion can help address the challenges related to plastic pollution, offering sustainable alternatives that can operate using bioeconomic concepts and promote socioeconomic benefits. In this context, using soil from a plastic-contaminated landfill, two consortia were established (ConsPlastic-A and -B) displaying versatility in developing and consuming polyethylene or polyethylene terephthalate as the carbon source of nutrition. The ConsPlastic-A and -B metagenomic sequencing, taxonomic profiling, and the reconstruction of 79 draft bacterial genomes significantly expanded the knowledge of plastic-degrading microorganisms and enzymes, disclosing novel taxonomic groups associated with polymer degradation. The microbial consortium was utilized to obtain a novel Pseudomonas putida strain (BR4), presenting a striking metabolic arsenal for aromatic compound degradation and assimilation, confirmed by genomic analyses. The BR4 displays the inherent capacity to degrade polyethylene terephthalate (PET) and produce polyhydroxybutyrate (PHB) containing hydroxyvalerate (HV) units that contribute to enhanced copolymer properties, such as increased flexibility and resistance to breakage, compared with pure PHB. Therefore, BR4 is a promising strain for developing a bioconsolidated plastic depolymerization and upcycling process. Collectively, our study provides insights that may extend beyond the artificial ecosystems established during our experiments and supports future strategies for effectively decomposing and valorizing plastic waste. Furthermore, the functional genomic analysis described herein serves as a valuable guide for elucidating the genetic potential of microbial communities and microorganisms in plastic deconstruction and upcycling.

Synthesis of a novel double Z-scheme BiVO4/Cu2O/g-C3N4 sonocatalyst and research on sonocatalytic degradation of tetracycline

BiVO4/Cu2O/g-C3N4 ternary heterojunction as a double Z-scheme sonocatalyst was effectively synthesized by the solvothermal and thermal decomposition method. The sonocatalysts’ structure, morphology, chemical makeup, and physicochemical characteristics were assessed by using XRD, SEM, TEM, XPS, DRS, and BET. Tetracycline (TET) was utilized for the modeled chemical contaminant to investigate the sonocatalytic capabilities of the sonocatalysts. The findings showed that BiVO4/Cu2O/g-C3N4 had remarkable sonocatalytic activity, and the degradation rate reached 93.80±0.33 % within 30 min. By further studying the electron separation and migration behavior, a feasible sonocatalytic mechanism of BiVO4/Cu2O/g-C3N4 is proposed. This research will pave the practicable way for the new double Z-scheme sonocatalytic system.

Single step grown porous polycrystalline nickel microstructures with ultra-thin defect rich surface oxide for alkaline water oxidation

Investigation on the intrinsic catalytic activity of structurally diverse polycrystalline nickel microstructures such as porous nickel sheets (PNS), porous folded/curled nickel structures (PFNS) and porous nickel balls (PNB) revealed the surface bounded electrocatalytic activities within an alkaline reaction environment for water oxidation. Nickel microstructures were grown via template/surfactant-free, single step solution combustion technique in air atmosphere. The distinct morphologies (porous nickel sheets, porous folded/curled nickel structures and porous nickel balls) were achieved through changing the quantity of HNO3 in the reaction mixture. The physicochemical characterisations were done with XRD, FESEM, EDS and XPS. Microscopic studies revealed the growth of nickel grains with numerous macro pores forming microstructures in distinct morphologies. The O ls spectra of XPS studies revealed the presence of O−/O2− sites and Ni 2p spectra were distinguished between the formation of Ni0/Ni2+/Ni3+ states, implied the existence of surface oxide with plenty of defects. The synergistic effect results from the formation of microscopic porous architectures with defect rich surface oxide on the electrochemical behaviour and OER activity of PNS, PFNS and PNB were discussed with electrochemical techniques such as CV, LSV, EIS and CP. The OER kinetics in terms of relatively low value of overpotential at 10 mA cm−2 and Tafel slope along with high specific activity of PNS/GCE with respect to PFNS/GCE and PNB/GCE were attributed to the combined effect of increase in electrochemical surface area, high roughness factor and fast charge transfer kinetics. The better electrochemical performance and OER activities of porous nickel sheets in comparison with folded/curled nickel structures and nickel balls is contributed to the unique 2D porous architecture with plenty of oxygen vacancies. This structure not only expose more surface for the formation of passive oxide layer in an alkaline reaction environment but also exhibit facile charge transport properties, causes the generation of numerous surface-active sites for electrocatalytic water oxidation. The outcome of our work gives new insights on the surface electrochemistry of polycrystalline nickel, enables micro-structuring as a prospective strategy towards the optimization of electrocatalysts as anode material for alkaline water oxidation.