Physicochemical Characteristics Research Articles

A new green catalyst and antimicrobial agent derived from eco-friendly products of camel bones: synthesis and physicochemical characterization

A new green catalyst and antimicrobial agent derived from eco-friendly products of camel bones: synthesis and physicochemical characterization

Evaluation of bacterial anti-adhesion and sustained antimicrobial abilities of chlorhexidine gluconate-loaded phase-transited lysozyme nanoparticle suspension on dentine: An exvivo study.

To evaluate the effect of chlorhexidine gluconate-loaded phase-transited lysozyme (CHG@PTL) coating on inhibiting bacterial adhesion and biofilm formation in an exvivo root canal dentine model. The physicochemical and structural characteristics of CHG@PTL nanoparticle suspension and its coating formed on the dentine surface were analysed by thioflavin T fluorescence assay, transmission electron microscopy and confocal laser scanning microscopy (CLSM). The sustained chlorhexidine release profile of the CHG@PTL coating on the dentine surface was compared with that of the 2% CHG solution. By comparing with phosphate-buffered saline, 1% sodium hypochlorite and 2% CHG solutions, the sustained antibacterial ability of the CHG@PTL coating and its effects on adhesion and biofilm formation of three types of bacteria (E. faecalis, S. mutans, and A. viscous) were analysed in exvivo root canal dentine models using the serial plate transfer test (SPTT) and CLSM with live/dead bacterial staining, respectively. CHG promoted the lysozyme protein to form a higher proportion of β-sheet structure during phase transition. In the CHG@PTL nanoparticle suspension, characteristic drug-loaded nanospheres with a high concentration of CHG molecules inside and an outer PTL nanofilm were observed, and they formed a thinner and tighter coating on the dentine surface. The CHG@PTL coating on the dentine surface showed a significantly higher cumulative release amount of chlorhexidine than that of 2% CHG (p < .05). The results of SPTT showed that the CHG@PTL coating had a longer antibacterial duration than the control groups. After 12 h of incubation, a higher number of bacteria were agglutinated on the CHG@PTL coating surface compared to the control groups (p < .05). After 7 days of incubation, the number of agglutinated bacteria significantly decreased. At two time points, the percentage of dead bacteria on the CHG@PTL coating surface was the highest among all experimental groups based on CLSM observation (over 99.9% for all three bacteria, p < .001). CHG@PTL nanoparticle suspension could form an antimicrobial coating on the surface of dentine with a novel 'agglutinating bacteria and sterilizing' mode.

From Preformulative Design to In Vivo Tests: A Complex Path of Requisites and Studies for Nanoparticle Ocular Application. Part 1: Design, Characterization, and Preliminary In Vitro Studies.

Ocular pathologies are widely diffused worldwide, and their effective treatment, combined with a high patient compliance, is sometimes challenging to achieve due to the barriers of the eye; in this context, the use of nanoparticles for topical ophthalmic application could represent a successful strategy. Aiming to develop nanoplatforms with potential clinical applications, great attention has to be paid to their features, in relation to the route of administration and to the pharmacopoeial requirements. This review (part 1) thus embraces the preliminary steps of nanoparticle development and characterization. At the beginning, the main barriers of the eye and the different administration routes are resumed, followed by a general description of the advantages of the employment of nanoparticles for ocular topical administration. Subsequently, the preformulative steps are discussed, deepening the choice of raw materials and determining the quantitative composition. Then, a detailed report of the physicochemical and technological characterization of nanoparticles is presented, analyzing the most relevant tests that should be performed on nanoparticles to verify their properties and the requisites (both mandatory and suggested) demanded by regulatory agencies. In conclusion, some preliminary noncellular in vitro evaluation methods are described. Studies from in vitro cellular assays to in vivo tests will be discussed in a separate (part 2) review paper. Hence, this overview aims to offer a comprehensive tool to guide researchers in the choice of the most relevant studies to develop a nanoplatform for ophthalmic drug administration.

Application of electrospinning and 3D-printing based bilayer composite scaffold in the skull base reconstruction during transnasal surgery

Skull base defects are a common complication after transsphenoidal endoscopic surgery, and their commonly used autologous tissue repair has limited clinical outcomes. Tissue-engineered scaffolds prepared by advanced techniques of electrostatic spinning and three-dimensional (3D) printing was an effective way to solve this problem. In this study, soft tissue scaffolds consisting of centripetal nanofiber mats and 3D-printed hard tissue scaffolds consisting of porous structures were prepared, respectively. And the two layers were combined to obtain bilayer composite scaffolds. The physicochemical characterization proved that the nanofiber mat prepared by polylactide-polycaprolactone (PLCL) electrospinning had a uniform centripetal nanofiber structure, and the loaded bFGF growth factor could achieve a slow release for 14 days and exert its bioactivity to promote the proliferation of fibroblasts. The porous scaffolds prepared with polycaprolactone (PCL), and hydroxyapatite (HA) 3D printing have a 300 μm macroporous structure with good biocompatibility. In vivo experiments results demonstrated that the bilayer composite scaffold could promote soft tissue repair of the skull base membrane through the centripetal nanofiber structure and slow-release of bFGF factor. It also played the role of promoting the regeneration of the skull base bone tissue. In addition, the centripetal nanofiber structure also had a promotional effect on the regeneration of skull base bone tissue.

Microbiological and physicochemical characterization of Minas artisanal cheese from the Campo das Vertentes region (Brazil) during ripening in rainy and dry seasons

Introduction: Minas artisanal cheese is produced from raw milk. Legislation establishes a minimum 22-day ripening period for the cheese from Campo das Vertentes region. However, the lack of studies does not allow to attest whether this period is adequate to comply with the parameters. Objective: Based on this, the aim of this survey was to evaluate the microbiological and physicochemical quality of these cheeses throughout the ripening period at rainy and dry seasons. Method: Cheese samples throughout ripening were collected at four cheesemaking facilities, and were submitted to microbiological and physicochemical analyses. Results: The quality of cheeses was influenced by the ripening period and counts of coliforms at 45°C and molds and yeasts were affected by the season. Conclusions: The results met the official legislation requirements for cheeses at 60 and 22 days of ripening at rainy and dry seasons, and demonstrate the need for improvements in the control of coliforms and Staphylococcus.

Physicochemical and functional characteristics of egg white powder as affected by pre-treatment and drying methods

Egg white is often regarded as a high-quality protein source that contains all essential amino acids required by humans. A fresh egg in liquid form has a short shelf life, thus drying it into powder can be the best alternative for a longer short life. This research aimed to evaluate the physicochemical and functional characteristics of egg white powder (EWP) as affected by pasteurization as pre-treatment and drying methods. There were six treatments in the preparation of EWP, i.e., pasteurization, unpasteurization and combined with three drying methods (spray-, cabinet-, or freeze-drying). The physical and functional properties of EWP were determined i.e., the yield, color, water activity, bulk density, flowability, foaming, emulsification, water absorption (WAC), oil absorption capacity (OAC), and gel strength. The chemical properties i.e. moisture content, fat, ash, protein content, protein digestibility, and antioxidant activity were also determined. The results showed that pasteurization and different drying methods affected the physicochemical and functionality of EWP. Pasteurization treatment significantly increased the bulk density of EWP prepared by spray- and cabinet drying, WAC of EWP prepared by spray- and cabinet drying, gel strength of EWP prepared by spray drying, the protein content of EWP prepared by spray drying, protein digestibility of EWP prepared by spray- and cabinet drying; however, significantly decreased the aerated and tapped bulk density of EWP prepared by freeze-drying, gel strength of EWP prepared by cabinet- and freeze-drying, the protein content of EWP prepared by cabinet- and freeze-drying, protein digestibility of EWP prepared by freeze-drying, antioxidant activity of EWP prepared by spray-, cabinet-, and freeze-drying. Different drying methods significantly affected the color parameters, bulk density, gel strength, moisture content, protein content and protein digestibility. This study suggested that the best characteristic of EWP was that of unpasteurized and prepared by freeze-drying method.

Anaerobic digestion of dairy cow and goat manure: Comparative assessment of biodegradability and greenhouse gas mitigation

This study evaluated the anaerobic digestion (AD) of dairy cow and goat manure from dairy farming operations. The physicochemical characteristics, biodegradability and greenhouse gas emissions (GHG) reduction potential were assessed. Dairy goat manure exhibited higher volatile solids (16 % vs. 10 %) and 34 % greater chemical oxygen demand content (COD) compared to cow manure, indicating better suitability for AD. However, biochemical methane potential tests revealed higher methane yields from cow manure (81 % biodegradability) compared to goat manure (26 % biodegradability), attributed to slower hydrolysis rates and recalcitrant composition of goat manure. Both manures displayed suboptimal carbon-to-nitrogen ratios (<20:1) and excessive levels of mineral nutrients such as calcium. The ammonia–nitrogen and volatile fatty acid levels remained below threshold limits throughout the anaerobic digestion process, indicating no significant accumulation or inhibition. Recovering biogas through AD showed potential GHG reductions of 64 % (2.21 t CO2-eq/cow·year) and 69 % (0.27 t CO2-eq/goat·year) compared to conventional manure management practices. While pretreatment and co-digestion could enhance biogas production, further research is needed to optimise these strategies for efficient resource recovery and environmental sustainability in dairy farming operations.Abbreviations: AD, anaerobic digestion; AWMS, animal waste management systems; BMP, biochemical methane potential; CHNS, carbon, hydrogen, nitrogen, and sulphur; C/N, carbon-to-nitrogen, COD, chemical oxygen demand; GC-FID, gas chromatography-flame ionisation detection; GHG, greenhouse gas; GWPM, global warming potential of methane; He, helium; ICP-MS, inductively coupled plasma mass spectrometry; I/S, inoculum-to-substrate ratio; IPCC, International Panel on Climate Change; NH3-N, ammonia–nitrogen; SD, standard deviation; TBMP, theoretical biochemical methane potential; TN, total nitrogen; TS, total solids; VFAs, volatile fatty acids; VS, volatile solids.

Effect of alginate concentration on the physicochemical characteristics and entrapment efficiency of bioactive compounds in microencapsulated bekasam extract

Bekasam extract functions as an effective agent for reducing cholesterol and hypertension levels. One of the practical methods to utilize this extract is through microencapsulation. During the manufacturing of consumables, microcapsules can be incorporated into foods and beverages as functional additives. Therefore, this study aimed to investigate microencapsulation methods of bekasam extract, specifically by using ionic gelation with sodium alginate as a coating at varying concentrations of 0.50%, 0.75%, 1.00%, and 1.25%. The results showed that the diameter of the microcapsules produced ranged from 3.71-3.92 mm, and the yield was 21.83-40.47%. The microcapsules contained 6.3-10.08% peptides and 37.89-46.39 ppm of Lovastatin with an entrapment efficiency of 17.31- 27.69% and 59.08-72.76%, respectively. The microcapsules made with alginate (1.25%) had higher levels of Lovastatin and peptides.

Physicochemical Properties of Low-Molecular-Weight Homogalacturonan Pectin from Enzyme-Hydrolyzed Red Okra

In this study, we focused on reducing the molecular weight of purified red okra pectin using various hydrolytic enzymes and evaluating its physicochemical properties or characterization. The enzyme treatments targeted both the main pectin chain and the side-chain sugars, resulting in a reduction in the molecular weight by approximately 10% (from 647 kDa) to 60% (down to 252 kDa). Both the purified red okra pectin and enzyme-treated pectins exhibited a homogalacturonan (HG)-type backbone. Fourier transform infrared (FT-IR) spectroscopy revealed a decrease in the absorbance peak for the pectin backbone (1200–1000 cm−1) in the low-molecular-weight (LMW) pectin. The most significant decrease was observed at 3300 cm−1 in pectin treated with both RGH+RGAE enzymes, indicating reduced sugar bonds. These results demonstrate the physicochemical changes in LMW red okra pectin following enzyme treatment and confirm its potential applications due to its unique characteristics.

Recent Advances in Zinc Oxide Nanoparticles: Synthesis Methods, Characterization Techniques, and Emerging Applications

Abstract: Zinc oxide (ZnO) is an inorganic compound with unique physicochemical characteris-tics that make it versatile and suitable for various applications, especially in the form of nanoparti-cles (NPs). ZnO nanoparticles (ZnO NPs) exhibit distinct properties and are produced through diverse techniques, making them valuable for applications ranging from consumer goods to medi-cal and catalytic uses. The increasing popularity of ZnO NPs is driven by novel synthesis methods that allow for modification of chemical composition and control over size and shape, thereby en-hancing their properties and expanding their applications. The catalytic activity of ZnO NPs is influenced by parameters such as oxophilicity, large surface area, amphoteric nature, and the zinc cation's ability to approach activated starting material supports, making them viable heterogeneous catalysts for a variety of applications. Various analytical techniques, including X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) analysis, atomic force microscopy (AFM), and many more, are used to characterize the nanoparticles. This article explores various synthesis methods and characterization techniques and focuses on the catalytic activities of ZnO NPs

An Overview of the Cancer Targeting Attributes of the Elastin Like Polypeptide Nano‐Carriers: Discerning Active and Passive Modes

AbstractSince the 1940s, generalized cytotoxic therapy has been a valuable tool in cancer treatment. Over the years, there's been a significant increase in developing potential cytotoxic drugs. However, little progress has been made in enhancing patients' quality of life. The therapeutic index is limited due to the drug's poor solubility and lack of selectivity. Various carriers have been explored for drug delivery to enhance efficacy. Yet, there's a gap for a versatile delivery system that can adjust to specific drug and application requirements. Here, a multifaceted drug delivery platform based on a genetically engineered nature‐inspired polymer, elastin‐like polypeptide (ELP) is introduced. This technology enables the customization of the polymeric vehicle's physicochemical characteristics to suit the needs of a specific drug and application. The review highlights ELP's advantages in cancer targeting, such as site‐specificity, controlled release, biocompatibility, and extended plasma circulation. For the first time, ELP‐based drug delivery into passive and active targeting for better comprehension of its adaptability is classified. Moreover, numerous opportunities for loading different types of drugs onto the polymer are outlined. Finally, the polymer's efficacy in delivery across multiple cancer types, underscoring the wide spectrum of ELP‐based cancer drug delivery is precisely described.

DFT, Molecular Docking, ADME, and Cardiotoxicity Studies of Persuasive Thiazoles as Potential Inhibitors of the Main Protease of SARS-CoV-2.

This study explores the capability of thiazoles as potent inhibitors of SARS-CoV-2 Mpro. Seventeen thiazoles (1-17) were screened for their linking affinity with the active site of SARS-CoV-2 Mpro and compared with the FDA-recommended antiviral drugs, Remdesivir and Baricitinib. Density Functional Theory (DFT) calculations provided electronic and energetic properties of these ligands, shedding light on their stability and reactivity. Molecular docking analysis revealed that thiazole derivatives exhibited favorable linking affinities with various functional sites of SARS-CoV-2 proteins, including spike receptor-linking zone, nucleocapsid protein N-terminal RNA linking zone, and Mpro. Notably, compounds 3, 10, and 12 displayed the best interaction with 6LZG as compared to FDA-approved antiviral drugs Remdesivir and Baricitinib, while compounds 1, 10, and 8 exhibited strong linking with 6 M3 M and also better than Remdesivir and Baricitinib. Additionally, compounds 3, 1, and 6 showed promising interactions with 6LU7 but only compound 3 performed better than Baricitinib. An ADME (Absorption, Distribution, Metabolism, and Excretion) study provided insights into the pharmacokinetics and drug-likeness of these compounds, with all ligands demonstrating good physicochemical characteristics, lipophilicity, water solubility, pharmacokinetics, drug-likeness, and medicinal chemistry attributes. The results suggest that these selected thiazole derivatives hold promise as potential candidates for further drug development.

Frenkel defects facilitate oriented 1O2 formation in birnessite for enhanced catalytic oxidation of formaldehyde

Defect strategy is one of the most effective approaches for enhancing the efficiency of Mn-based catalysts in removing formaldehyde (HCHO) under ambient conditions. Herein, the interlayer Mn-O octahedra in birnessite synergistically form with Mn vacancies through proton exchange in acidic solutions, creating surface Frenkel defects. As evidenced by highly combined physicochemical characterization and density functional theory calculations, surface Frenkel defects are highly active sites on the surface of birnessite. The surface Frenkel defects can induce surface electronic reconstruction, generating strong electrophilicity, which promotes the evolution of superoxide radicals (O2•−) into singlet oxygen (1O2). In-situ quenching DRIFTS indicates that 1O2 is the most important ROS in the oxidation process of HCHO. Additionally, the surface Frenkel defects enhance the adsorption of HCHO, promoting the dehydrogenation of HCHO to form CO, which is then rapidly oxidized to CO2 and H2O under the action of 1O2. This provide a more effective kinetic and thermodynamic catalytic pathway. The defect-rich birnessite (R-Bir) achieved complete HCHO removal in the dynamic test at 10 ppm within 10 hours, significantly outperforming defect-free birnessite (F-Bir) and most previously reported catalysts. This study precisely reveals the catalytic mechanism of HCHO over R-Bir and provides valuable insights for the design of high-performance environmental catalysts.

Physicochemical Characterization of Nanohydroxyapatite Powder in Simulated Body Fluid Immersion: A Pilot Study

Nanohydroxyapatite (n-HA) has been widely used as a bone graft material. In contact with biological fluids, n-HA should be reactive, resorbable, form an bone-like apatite layer on their surfaces, and enhance osseointegration. The release of Ca, P, and O in SBF predicted the formation of bone-like apatite layer. Therefore, this study aims to investigate the physicochemical properties of nano-HA powder during the SBF immersion in vitro. The n-HA powder was immersed in SBF for 24, 48 hours, 7, 14, and 28 days. The swelling ratio, pH, FTIR, and SEM-EDX were analyzed pre- and post-SBF immersion. The n-HA powder showed excellent hydrophilicity and a stable pH, even though there was a pH decrease in 28 days. The carbonate and phosphate functional groups were found through FTIR, in line with the ion composition changes and increase of the Ca/P ratio shown on EDX. Both mean weight percentages (%) of Ca and P increased during 14 days of SBF immersion (16.15 to 27.27; and 8.57 to 11.68, respectively). The other functional groups on the n-HA are PO3 −, CO2 −, O-H, C=H, and COO. In conclusion, the n-HA powder presents good physicochemical properties that indicate the formation of an apatite bonelike layer and is promising as a bone graft material.

Demystifying the Potential of Embelin-Loaded Nanoformulations: a Comprehensive Review.

Phytoconstituent based therapies have the potential to reduce the adverse effects and enhance overall patient compliance for different diseased conditions. Embelin (EMB) is a natural compound extracted from Embelia ribes that has demonstrated high therapeutic potential, particularly as anti-inflammatory and anticancer therapeutic applications. However, its poor water solubility and low oral bioavailability limitations make it challenging to use in biomedical applications. Nanostructure-based novel formulations have shown the potential to improve physicochemical and biological characteristics of active pharmaceutical ingredients obtained from plants. Different nanoformulations that have been utilized to encapsulate/entrap EMB for various therapeutic applications are nanoliposomes, nanostructured lipid carriers, niosomes, polymeric nanoparticles, nanosuspensions, phytosomes, self nanoemulsifying drug delivery system, silver nanoparticles, microparticles, solid lipid nanoparticle, gold nanoparticles and nanomicelles. The common methods reported for the preparation of EMB nanoformulations are thin film hydration, nanoprecipitation, ethanol injection, emulsification followed by sonication. The size of nanoformulations ranged in between 50 and 345nm. In this review, the mentioned EMB loaded nanocarriers are methodically discussed for size, shape, drug entrapment, zeta potential, in vitro release & permeation and in vivo studies. Potential of EMB with other drugs (dual drug approach) incorporated in nanocarriers are also discussed (physicochemical and preclinical characteristics). Patents related to EMB nanoformulations are also presented which showed the clinical translation of this bioactive for future utilization in different indications.

Biotic and abiotic properties mediating sediment microbial diversity and function in a river–lake continuum

A river–lake system plays an important role in water management by providing long-term and frequent water diversions. However, hydrological connectivity in the system can have a profound effect on sediment microbial communities through pH, nutrient concentrations, and benthos invertebrates. Consequently, identifying the key environmental factors and their driving mechanisms is vital for microbial adaptation strategies to extreme environments. In this study, we analyzed the significant difference in sediment bacterial and fungal community structures and diversity indices among Dongting Lake and its tributary rivers, which worked as a typical river-connected lake ecosystem. There were significant differences in biotic and abiotic environments in the sediment habitats of Dongting Lake and its tributary rivers. Random forest analysis revealed that pH and Mollusca were found to be the most important abiotic and biotic variables for predicting both bacterial and fungal community structures, respectively. The beta diversity decomposition analyses showed that the bacterial and fungal community compositional dissimilarities among different sections were dominated by species replacement processes, with more than half of the OTUs in each section being unique. Notably, both biotic and abiotic factors affected the number and the relative abundance of these bacterial and fungal unique OTUs, leading to changes in community composition. Mollusca, pH, TP, NO3-N, and NH4-N were negatively related to the relative abundance of Actinobacteria, Acidobacteria, Gemmatimonadetes, Planctomycetes, and Ascomycota, while Annelida and ORP were positively related to the relative abundance of Actinobacteria and Gemmatimonadetes. Additionally, PICRUSt analysis revealed that the functional dissimilarity among lakes and rivers was strengthened in unique species compared to all species in bacterial and fungal communities, and the changes of functional types helped to improve the habitat environment in the main Dongting Lake and promote the process of microbial growth. From our results, the role of macrozoobenthos and physicochemical characteristics in driving the sediment microbial community spatial variations became clear, which contributed to further understanding of the river–lake ecosystem.

Mechanisms of action of fungal polysaccharides and their therapeutic effect.

The purpose of this article is to discuss the relationship between the therapeutic bioactivity of basidial fungal polysaccharides (BFPs) BFPs and their structural characteristics and conformational features, as well as to characterize the mechanisms of action of BFPs in diseases of various origins. The review was conducted using the PubMed (Medline), Scopus, Web of Science and the Russian Science Citation Index databases. 8645 records were identified, of which 5250 were studies (86 were randomized controlled trials). The period covered is from 1960 to the present. The most significant studies conducted mainly in Southeast Asian countries were selected for the review. Based on clinical studies, as well as the results obtained on in vivo, in vitro and ex vivo models, it has been proven that BFPs have diverse and highly effective biological activity in the human body in various diseases. The production of BFPs-based vaccines is an innovative strategy from a clinical and biochemical point of view, since as potential immunoprotective and low-toxic biopolymers they have innate immune receptors in the body. Promising results have been obtained in the development of antidiabetic drugs, probiotic, renoprotective and neurodegenerative dietary supplements. The biological activity, mechanism of action and specific therapeutic effect of BFPs largely depend on their structural and physicochemical characteristics. BFPs as multifunctional macromolecular complexes with low toxicity and high safety are ideal as new powerful pharmaceuticals for the treatment and prevention of many diseases.

Dual-Action Gemcitabine Delivery: Chitosan–Magnetite–Zeolite Capsules for Targeted Cancer Therapy and Antibacterial Defense

Cancer and infectious diseases are two of the world’s major public health problems. Gemcitabine (GEM) is an effective chemotherapeutic agent against several types of cancer. In this study, we developed macrocapsules incorporating GEM into a chitosan matrix blended with magnetite and zeolite by ionic gelation. Physicochemical characterization was performed using HRTEM-ED, XRD, FESEM–EDS, FT-IR, TGA, encapsulation efficiency (%E.E.), and release profiles at pHs 7.4 and 5.0. Cell viability tests against A549 and H1299 cell lines, and microbiological properties against staphylococcal strains were performed. Our results revealed the successful production of hemispherical capsules with an average diameter of 1.22 mm, a rough surface, and characteristic FT-IR material interaction bands. The macrocapsules showed a high GEM encapsulation efficiency of over 86% and controlled release over 24 h. Cell viability assays revealed that similar cytotoxic effects to free GEM were achieved with a 45-fold lower GEM concentration, suggesting reduced dosing requirements and potentially fewer side effects. Additionally, the macrocapsules demonstrated potent antimicrobial activity, reducing Staphylococcus epidermidis growth by over 90%. These results highlight the macrocapsules dual role as a chemotherapeutic and antimicrobial agent, offering a promising strategy for treating lung cancer in patients at risk of infectious diseases or who are immunosuppressed.

KOH Activated Walnut Shell Biochar Electrode of Capacitive Deionization and Its Desalination Performance

Abstract The flake biochar electrode materials with fast ion transport function were prepared by KOH activation walnut shell used as raw material. The effects of carbonization temperature and KOH-to-biochar ratio were systematically evaluated using physicochemical characterization and electrochemical performance testing. The optimized walnut shell biochar (WSC800-2), produced at 800℃ with a KOH-to-biochar ration of 2∶1, exhibited an exceptional specific surface area (2,287 m2 g-1), the highest porosity (0.824 cm3 g-1), and an excellent specific capacitance (369.51 F g-1, 10 mV s-1). Furthermore, in desalination experiments, WSC800-2 achieved a high salt adsorption capacity of 15.70 mg g-1 at 1.2V, 500 mg L-1 NaCl solution. The electrode also exhibited outstanding cycling stability, retaining 97.0% of its performance after 10 adsorption/desorption cycles. These findings highlight the potential of walnut shell-derived biochar as an effective material for capacitive deionization and future desalination technologies.

Metabolomic analysis of the browning and browning inhibition pulp of Fuji apple at different ripening stages

Apples at different ripening stages display distinct processing properties and browning characteristics in products. This study aimed to identify differential metabolites and metabolic pathways of browning pulp and browning inhibition pulp of Fuji apple across four ripening stages (M1–M4), corresponding to days after full bloom (DAFB: 148, 155, 162, and 171). We investigated the physicochemical characteristics, browning-related enzyme activities, and metabolomic profiles of apples at the four stages, revealing defensive metabolic changes associated with browning throughout ripening. Specifically, the browning rate in apples increased with ripening, peaking before declining in the late stages, and exhibited positive correlations with activities of polyphenol oxidase (PPO), peroxidase (POD), and catalase (CAT), and negative correlations with superoxide dismutase (SOD), phenylalanine ammonia-lyase (PAL), and H2O2 levels. Metabolomic profiling identified 315, 393, and 243 distinct metabolites in fresh control (FC), browning pulp (BR), and browning-inhibited pulps (CM) of apple at the four ripening stages, respectively. KEGG enrichment analysis revealed that FC and BR of the four ripening apples were differentiated by phenylpropanoid biosynthesis, while CM was featured by flavonoid biosynthesis. The characterized differential metabolites in BR were changed to α-linolenic acid metabolism with ripening, while those in CM were from flavonoid and phenylpropanoid biosynthesis. Furthermore, the in-depth analysis revealed 40 significantly differential metabolites associated with amino acid, nucleotide, coenzyme, and vitamin metabolism, potentially modulating the stress-responsive cellular redox balance. This research provides critical insights for browning prevention in the processing of fruits at various ripening stages.