Physical Instruments Research Articles

Physical test instrument: a development study for junior Karateka in the kata category

Good physical condition is very important for the karate martial arts branch, especially the kata category. Where physical condition is the main supporting factor so that the ability of kihon, kumite and kata karateka can develop properly. Therefore, it is necessary to develop a valid and reliable karate physical condition test and measurement instrument for the kata category so that it can be used in karate development. The purpose of this study was to develop tests and compile a norm instrument for junior category karate physical tests aged 16-17 years that can be used as a measuring tool to test the physical condition of karateka. Research and development (R&D) method. This research was conducted at a karate dojo under the guidance of the Indonesian Karate-Do Sports Federation (FORKI). Small-scale trial subjects included 55 respondents and a large trial group included 114 respondents. The karate trial subjects were 16-17 years old (junior) and determined the trial sample with purposive sampling technique. Data analysis techniques using correlation tests, validity tests and reliability tests. The results of this study showed two series of karate physical test instruments for junior karate athletes (aged 16-17 years) male and female consisting of; V Sit And Reach, Hexagonal Obstacle, Stork Standing balance, Throw Catch Ball tennis, Two Hands Medicine Ball Put, Standing Broad Jump, 2 Minute Sit Ups, Multistage Fitness Test. The validity of the eigenvalue of factor analysis > 1 and can be said to be valid. Reliability is done by re-testing or correlation between the same groups for two treatments. Based on the difference significance test, it shows that t-count = 3.617, df = 59 and P-Value = 0.01 <0.05, which means there is a significant difference in the pre-test and post-test results. Based on this information, it can be said that the physical test instrument model developed is effective, so it can be said that the test used is reliable. In conclusion, 8 items of karate physical test instruments have been produced for junior kata karate category athletes, the preparation of karate physical test norms for junior kata category athletes, and 8 items of physical test instruments have been produced that are effectively used to improve the achievements of junior male and female karate athletes. It is recommended that research be carried out on a larger scope of subjects and a wider research location, so that this measuring instrument product is more tested for feasibility. Keywords: Test Instruments, Condition Physique, Karate juniors, Category Kata

Online demand peak shaving with machine‐learned advice in digital twins

AbstractAs the use of physical instruments grows, control algorithms are being increasingly deployed to enhance efficiency and reliability through digital twin technology. Demand load management is central to energy systems within digital twins, which significantly impacts operational costs. Peak demand loads can lead to substantial monthly utility expenses without proper management. AMPAMOD, a randomised online algorithm incorporating machine‐learned insights is introduced to optimise battery operations and mitigate peak demand loads. AMPAMOD leverages limited‐bit information from machine learning models to inform its online decision‐making process for cost‐effective load management. We provide theoretical evidence demonstrating that AMPAMOD maintains minimal advice complexity, has a linear computational cost, and achieves a bounded competitive ratio. Extensive trace‐driven experiments with real‐world household data reveal that AMPAMOD successfully reduces peak loads by over 90%, outperforming other benchmarks by at least 50%. These experimental findings align with our theoretical assertions, showcasing the effectiveness of AMPAMOD.

The Influence of Physical Fitness, Motor Skills, and Learning Motivation on Cartwheel Skills in Physical Education

Background Problems: During the observation, many students were unable to perform cartwheel skills. This research is important so that students can pass the minimum completion criteria so that their physical education learning outcomes are not low. Research Objectives: This study aims to determine the factors that influence the skills of cartwheel. Methods: This type of research is quantitative. The population amounted to 392 students in class XI. The technique used to obtain the sample is simple random sampling using the slovin formula with an error rate of 10%. Based on this, the sample amounted to 80 students. The physical fitness test instrument used the Indonesian Student Fitness Test, the motor ability test instrument used the Barrow Motor Ability Test, the learning motivation data was collected using a questionnaire, and the cartwheel skill data used an observation sheet which contained the criteria for implementing the cartwheel movement. Path analysis was used as a data analysis technique. Finding/Results: The results of the study consist of: 1. Physical fitness and motor skills have a significant influence on cartwheel skills. 2. Learning motivation has no significant effect directly on cartwheel skills. 3. Physical fitness indirectly through learning motivation has no significant effect on cartwheel skills. 4. Motor ability indirectly through learning motivation has no significant effect on cartwheel skills. Conclusion: Physical fitness and motor skills have a significant influence on cartwheel skills. Students need to do it outside of PJOK class hours. For Further Researchers Conduct research on other gymnastic movements.

Virtual Laboratories in STEM

Virtual laboratory utilization has been trending in STEM undergraduate curricula for over twenty years. A virtual laboratory is an interactive computer simulation that mimics real-world laboratory experiences in silico. Virtual labs are cost-effective pedagogical options for academic institutions that lack adequate funding for physical infrastructure and instrumentation. Virtual labs are an excellent proxy for lab activities threatening individual safety and public health. Further, during the COVID-19 pandemic, virtual labs were the primary pedagogical strategy for laboratory instruction. STEM faculty have developed numerous techniques for incorporating virtual labs into classroom and laboratory activities. New technology like artificial intelligence will expand virtual lab usability and effectiveness. Educational research demonstrates positive student outcomes and other benefits from virtual lab engagement. Continued effective mixed-methods research and production of essential virtual lab-based evaluation materials, such as discipline-specific rubrics, are needed to advance the application of this vital technology further. Moreover, from a software development perspective, many more virtual laboratories are needed in technology, engineering, mathematics, and specialized scientific fields.

Peran Day Care Dalam Stimulasi Perkembangan Fisik Motorik Anak Usia Dini Di Buncha Daycare Jakarta Pusat

Nurpadilah, The Role of Day Care in Stimulating Early Childhood Physical Motor Development at Buncha Daycare, Central Jakarta (2024). Thesis. Jakarta: College of Teacher Training and Education Panca Sakti Bekasi. 2024. This study aims to examine the role of day care in stimulating the physical motor development of early childhood in buncha day care central Jakarta, using physical motor development instruments with the role of day care in child growth and development and the effectiveness of day care in stimulating children's physical motor development using the Likert model attitude scale form. The research method used is descriptive research method with qualitative approach. The subjects of this study were elements of the day care institution which included the principal, educators/caregivers, and parents at Buncha Day care. Data collection techniques using interviews, observation and documentation with a qualitative data analysis process through several activities, namely data reduction, data display and conclusion drawing/verification. The results showed that the growth and development of children (aged 2-3 years) there are still those who are not actively participating in activities (rare entry / new to daycare) and must be considered again by employees or parents and more routine child stimulation is needed because seeing growth and development is not in accordance with the age stage. Through analysis of the results of observations, what should be considered

Concurrent Validity of The U21 Men's Soccer Physical Test Battery

This study aims to test the validity of the U-21 men’s soccer physical test battery. The method used in this research is an evaluation approach. Data collection techniques in this research used tests and measurements. The subjects involved in this research were U-21 male soccer athletes in Papua. The total number of subjects participating in concurrent validity testing was 31 athletes. The instruments used in this research are body mass index (BMI) to measure body composition, sit and reach to measure flexibility, 30-meter sprint to measure speed, shuttle run to measure agility, leg and back dynamometer to measure muscle strength, and standing board. jump to measure explosive power, and the Multistage Fitness Test (MFT) to measure cardiovascular endurance. Validity testing uses a concurrent validity approach. The data analysis technique used in concurrent validity testing is using correlation product moment. This test is carried out by looking at the relationship between the tests on the first day and the second day. The results showed that each test item on the U-21 men’s soccer physical test battery had a calculated r value greater than the r table. Thus, it can be concluded that the U-21 Putra football physical test battery has a high validity value. Further research needs to test the reliability of the instrument to get a physical test instrument that meets the standards.

Development Trends of Insurance and Reinsurance Brokers in Georgia

Insurance is a very common and effective tool for managing financial risks. It also assumes the transfer of the risk in full or in part, but in this case the risk is transferred to the insurance company. Let's remember that insurance is one of the financial instruments of risk management, and not the only one. At the same time, it should be noted that insurance is a non-permanent instrument, and it cannot be used for all risks and in all risky situations. There are quite frequent cases when insurance is used together with other risk management tools, that is, it is part of the risk management program. Чачастую рашовые компании themselves require the client to reduce the existing primary risks with the help of physical instruments before signing the insurance contract. For example, in agriculture, it is completely unacceptable to manage risks there only by means of insurance. the first Keywords: insurance broker, insurance mediator, insurance product, sales channel, independent agent.

Thin-Film Embedded Sensors for Battery Health Monitoring

Hybrid or all-electric aircraft are being developed as the next generation of aircraft to both allow new forms of aviation and decrease environmental impact. Since these types of aircraft are based on high-capacity battery technology, safe operation of these batteries becomes increasingly important. In particular, the potential for battery failure due to uncontrolled chemical reactions resulting in thermal runaway, catastrophic failure, and battery fires must be addressed in order for such battery technology to have the level of safety needed for standard aviation implementation. Efforts to ensure battery safety often involve engineering solutions that seek to contain rather than prevent such events by early detection. Such approaches increase the system weight and decrease the power per unit mass provided by the battery system. Existing methods for measuring battery parameters to determine the battery state-of-health are limited. These methods include electrical measurements of the cell current and/or voltage output as well as temperature measurements taken externally on the cell surface. Such external temperature measurements are limited in their ability to provide early warning of impending battery failure. In response, an effort to develop sensors operating internal to battery for health monitoring has been ongoing in the NASA Sensor-based Prognostics to Avoid Runaway Reactions & Catastrophic Ignition (SPARRCI) project [1]. The basic approach associated with this sensor work is the deposition of thin film sensors on the battery separator located between the anode and cathode of the battery. These thin film sensors are then monitored to determine changes in battery parameters and health. Microfabrication techniques are employed to minimize the overall impact of the sensors on battery operation through the implementation of sensors with minimal size, weight, and power consumption. The thickness of the films, which are fabricated through physical vapor deposition (sputtering), are on the order of thousands of angstroms and can have minimal surface area. Thin film sensors for system health management have been implemented for a many decades on complex components for aerospace applications [2,3]. However, the application of thin films of this type on a battery separator for internal battery monitoring applications has not previously been demonstrated to our knowledge. This paper describes the development of sensors for the internal battery monitoring through the use of thin film sensor technology. Thin metal films were successfully deposited on a battery separator polymer material with good adherence and electrical continuity. Multiple types of sensors have been deposited, as well as lead connections from the sensor to the edge of the separator material. The ability of these thin film sensors immersed in electrolyte to perform multiple types of battery parameter measurements has been demonstrated. For example, a multiparameter sensor system measured multiple properties simultaneously inside of a pouch cell over a wide temperature range. Further, real time measurement of interior temperature changes in a battery pouch cell with an integrated interior temperature sensor was demonstrated. These changes include detecting a fault in the battery (shorting) in situ with rapid response time (less than a minute) corresponding to a more limited response by a temperature sensor mounted externally. Other aspects of monitoring battery health were also explored, such as real-time measurement of simulated dendrite growth/metal deposition by sensor on separator material demonstrated. Future efforts will include improvements in the durability of the sensor structure to allow introduction of the approach into standard battery fabrication techniques. Overall, this work is a step forward in providing a method to prevent catastrophic battery failures and provide a foundation for safer, lighter, and higher energy batteries for the electric aircraft industry.[1] B. DeMattia, Daniel Perey, John Lawson, and Gary Hunter, “Advanced Battery Health Approaches for Electric Aircraft”, Energy & Mobility Technology, Systems, and Value Chain Conference & Expo, Cleveland, OH, Sept. 23, 2023.[2] John D. Wrbanek, and Gustave C. Fralick, “Thin Film Physical Sensor Instrumentation Research and Development at NASA Glenn Research Center”, 52nd International Instrumentation Symposium Cleveland, OH, May 2006, NASA TM-2006-214395[3] Lawrence G. Matus (2015) “Instrumentation for Aerospace Applications: Electronic-Based Technologies”, Journal of Aerospace Engineering 26 (2) https://doi.org/10.1061/(ASCE)AS.1943-5525.0000302

Physical function measures in ICU survivors, where to now? A scoping review

Background. Growing evidence is describing the long-term morbidity experienced by critical illness survivors, a major contributing factor being impaired physical function. Consensus is yet to be reached on which physical function measures should be included in this population. This review aimed to describe physical functioning measurement instruments used in longitudinal studies of critical illness survivors, based on the International Classification of Function (ICF). Methods. An electronic database search of EbscoHost, Web of Science and Scopus was conducted from inception to November 2023. Two reviewers independently applied the inclusion and exclusion criteria to titles, abstracts and full text-studies. Extracted data included year of publication; country; participant age; follow-up timeframes and physical measurement instruments used. Instruments were classified according to ICF domains. Results. Eighty studies published between 1995 and November 2023 were included. Forty-four different outcome measures were identified. Most studies (68) included multiple followed-up points and were completed within a year, and few studies (12) follow-up beyond a year. Based on the ICF, 11 (25%) instruments measured impairments and 33 (75%) activity limitations. Muscle power functions were the most frequently measured impairment (65%), utilising manual muscle testing (37.3%). The six-minute walk test (6MWT) was the most frequently used instrument in the activity/participation domain (31.6%). Only one instrument addressed all five the physical activity/participation domains, while the majority focused on mobility domain. Conclusions. Multiple tools are used to report on physical deficits experienced by ICU survivors, either measuring impairments or activity/ participation limitations. Most studies report on physical function within the first year of survival. The heterogeneity and inconsistency over time of instruments used prevents synthesis of data to determine intervention efficacy. The validity, predictive value and sensitivity of the reported measures within ICU survivors needs to be established, only then can intervention studies be designed to measure effectiveness.

TomOpt: differential optimisation for task- and constraint-aware design of particle detectors in the context of muon tomography

We describe a software package, TomOpt, developed to optimise the geometrical layout and specifications of detectors designed for tomography by scattering of cosmic-ray muons. The software exploits differentiable programming for the modeling of muon interactions with detectors and scanned volumes, the inference of volume properties, and the optimisation cycle performing the loss minimisation. In doing so, we provide the first demonstration of end-to-end-differentiable and inference-aware optimisation of particle physics instruments. We study the performance of the software on a relevant benchmark scenario and discuss its potential applications. Our code is available on Github (Strong et al 2024 available at: https://github.com/GilesStrong/tomopt).

MAGPRIME: An Open‐Source Library for Benchmarking and Developing Interference Removal Algorithms for Spaceborne Magnetometers

AbstractMagnetometers are essential instruments in space physics, but their measurements are often contaminated by various external interference sources. In this work, we present a comprehensive review of existing magnetometer interference removal methods and introduce MAGPRIME (MAGnetic signal PRocessing, Interference Mitigation, and Enhancement), an open‐source Python library featuring a collection of state‐of‐the‐art interference removal algorithms. MAGPRIME streamlines the process of interference removal in magnetic field data by providing researchers with an integrated, easy‐to‐use platform. We detail the design, structure, and functionality of the library, as well as its potential to facilitate future research by enabling rapid testing and customization of interference removal methods. Using the MAGPRIME Library, we present two Monte Carlo benchmark results to compare the efficacy of interference removal algorithms in different magnetometer configurations. In Benchmark A, the Underdetermined Blind Source Separation (UBSS) and traditional gradiometry algorithms surpass the uncleaned boom‐mounted magnetometers, achieving improved correlation and reducing median error in each simulation. Benchmark B tests the efficacy of the suite of MAGPRIME algorithms in a boomless magnetometer configuration. In this configuration, the UBSS algorithm proves to significantly reduce median error, along with improvements in median correlation and signal to noise ratio. This study highlights MAGPRIME's potential in enhancing magnetic field measurement accuracy in various spacecraft designs, from traditional gradiometry setups to compact, cost‐effective alternatives like bus‐mounted CubeSat magnetometers, thus establishing it as a valuable tool for researchers and engineers in space exploration and magnetism studies.

A Systematic Review of Physical Modelling Techniques, Developments and Applications in Slope Stability Analyses

AbstractAn extensive evaluation of published articles suggests a lack of research on a systematic literature review relating to physical modelling techniques, developments and application in slope stability studies. However, there is growing interest in using physical model tests in slope stability investigations. The present study systematically reviews the methodologies and applications of physical modelling in slope stability research. The Scopus database was used to identify relevant studies which employed physical model tests in slope stability investigations. A combination of fifteen keywords was used to identify relevant articles. A PRISMA-P method for conducting a systematic review was adopted. Articles were screened and analysed, and extracted data were re-organised using an Excel sheet. Data relating to research objectives, physical model test techniques, instrumentation, scaling laws, numerical modelling, results, and findings were extracted and analysed. The systematic review highlights gaps requiring further studies, particularly in slope reinforcements using vegetation and strength deterioration of reinforcements performance under repeated loading exposures. It is found that scholars have not fully addressed the influence of loss of water on pore water regimes and its impact on stability when vegetation is applied as reinforcements. It is also found that the development of slope materials for soil slopes in physical model tests relies on the artificial development of such materials with minimal consideration of their long-term behaviour. Although other options, such as bio-cementation and desiccation techniques, which simulate the natural environment of the slopes, are neglected in slope material development, the present study recommends that future studies consider such techniques.

Level Of Physical Condition Of Athletes In Taekwondo Sports Jambi City Towards PORPROV 2021

This study aims to determine the level of physical condition of the Taekwondo athletes in Jambi City towards PORPROV 2021. This type of research is a qualitative approach that uses survey methods with test and measurement data collection techniques. The population of this research is Taekwondo athletes in Jambi City with a sample of 65 people. The physical condition instruments used are tests: Bleep test, Push ups, Sit ups, Wall shit, 20 meter run, T test, Sit and reach, Strok stand, Standing board jump. Based on the results of research and discussion, it can be concluded that the level of physical condition of athletes in the Taekwondo sport in Jambi City towards PORPROV 2021 which is in the Very Good category 5% with a total of 3 people, 23% in the Good category with a total of 15 people, 38% in the Medium category with a total of 25 people, 29 % is categorized as Less with a total of 19 people and 5% is categorized as Less Once with a total of 3 people. The results of the research on the level of physical condition of athletes in the Taekwondo sport in Jambi City towards PORPROV 2021 are in the medium category.

Bayesian uncertainty evaluation applied to the tilted-wave interferometer

The tilted-wave interferometer is a promising technique for the development of a reference measurement system for the highly accurate form measurement of aspheres and freeform surfaces. The technique combines interferometric measurements, acquired with a special setup, and sophisticated mathematical evaluation procedures. To determine the form of the surface under test, a computational model is required that closely mimics the measurement process of the physical measurement instruments. The parameters of the computational model, comprising the surface under test sought, are then tuned by solving an inverse problem. Due to this embedded structure of the real experiment and computational model and the overall complexity, a thorough uncertainty evaluation is challenging. In this work, a Bayesian approach is proposed to tackle the inverse problem, based on a statistical model derived from the computational model of the tilted-wave interferometer. Such a procedure naturally allows for uncertainty quantification to be made. We present an approximate inference scheme to efficiently sample quantities of the posterior using Monte Carlo sampling involving the statistical model. In particular, the methodology derived is applied to the tilted-wave interferometer to obtain an estimate and corresponding uncertainty of the pixel-by-pixel form of the surface under test for two typical surfaces taking into account a number of key influencing factors. A statistical analysis using experimental design is employed to identify main influencing factors and a subsequent analysis confirms the efficacy of the method derived.

Breaking Barriers: An Innovative Tool to Assess the National and City-Level Physical Activity Policy Development to Practice Disconnect.

Population-level physical activity increases are improbable without intersectoral collaboration across government levels and sectors to develop and implement physical activity promotion policies. This study aims to provide information about the development of the Interaction between National and Local Government Levels in Development and Implementation of Physical Activity Policies Tool (INTEGRATE PA-Pol). A framework was created to examine the development and implementation of national and subnational physical activity policies and the (mis)alignment between government levels. The work was conducted in 3 phases: (1)a scoping review was carried out to identify local government physical activity promotion policies and instruments for assessing them, (2)an expert group designed 6 questionnaires, and (3)cognitive response testing was employed for validity testing and item modification with a panel of research and policy experts. The INTEGRATE PA-Pol Tool consists of 6 questionnaires assessing how national and subnational governments collaborate to develop and implement physical activity promotion policies. This tool can assist in better understanding the development and implementation of a public policy monitoring system that will allow for benchmarking and priority setting to comprehend how physical activity promotion policies are designed and executed.

Effects of indoor hockey intervention on motor proficiency and physical fitness in adolescents

This study aimed to determine the intervention of hockey games in improving motor skills and physical fitness in adolescents. The research method used in this study was an experiment involving a control group. This research uses a pre-test-post-test randomized control group design, with a total sampling of 30 adolescents divided into 2 groups, namely the experimental group and the control group, each comprising 15 people. The determination of group division is divided randomly, and all subjects involved are used. Instruments used Children's Psychomotricity and Aptitude Scales (MSCA, USA). Physical fitness using physical fitness test instruments, which have been adjusted to the characteristics of the research subjects. The results showed that the intervention for 12 weeks in indoor hockey activity, intervention, and gross motor intervention showed a significance value of 0.034. Because the significance value < 0.05, Ho was rejected, compared to the results of participants in the study who were given an independent intervention program. The physical fitness data shows that the pre-test standard deviation is 1.30440 compared to the post-test 1.61211, this means that there is an increase in adolescent physical fitness. Thus, indoor hockey intervention has a significant influence on the physical fitness of adolescents. These findings prove that interventions in the form of physically engaging activities focusing on floor hockey sports may be a viable option for improving Motor Proficiency and Physical Fitness in Adolescents.

Development and testing of a four-item version of the physical resilience instrument for older adults (PRIFOR-4)

The 16-item Physical Resilience Instrument for Older Adults (PRIFOR) has good clinimetric properties; however, a shortened PRIFOR would greatly enhance physical resilience measurements in clinical settings. The current analysis aimed to reduce the number of PRIFOR while maintaining its clinimetric properties, emphasizing on its factor structure and convergent validity. A longitudinal study was conducted among 863 patients aged 65 years or older. Four PRIFOR items with high factor loadings were selected to generate the short version of PRIFOR (PRIFOR-4). The PRIFOR-4 was found to have a unidimensional structure (comparative fit index = 0.999; Tucker-Lewis index = 0.998 in the confirmatory factor analysis results) with good convergent validity with various external measures (absolute r = 0.109–0.597; p-values<0.01). Because the PRIFOR-4 contains only four items, the completion time for the respondents reduced three fourths from the original PRIFOR, which may have a marked reduction in the response burden. The PRIFOR-4 is thus an easy-to-use measurement that saves time for healthcare professionals in clinical practice.

Does Short-Term Speed Endurance Soccer Training Improve Physical Performance?

Objectives. This study is aimed at analyzing the impact of short-term Speed Endurance Soccer Training (SEST) training on the physical performance of young soccer players. Materials and methods. The true experiment method was used in this study. The study population comprised a total of 122 individuals. Furthermore, by using random sampling techniques, a sample of 30 persons was selected with an average age of 15.2 ± 0.81 years, height 168.1 ± 4.82 cm, weight 57.85 ± 11.93 kg, and BMI 20.34 ± 3.37. Physical performance instruments included the Running Based Anaerobic Sprint Test (RAST), Yo-Yo intermittent test level 1, 20-meter sprint, and standing broad jump test. The study used the paired t-test to evaluate the effect of each group and the independent samples t-test to compare the improvement in the experimental (SEST) and control groups. Statistical significance was set at p &lt; 0.05. Results. The paired t-test showed significant differences between the pretest and post-test in the SEST group in anaerobic (p = .000, Δ% = 8.4), aerobic (p = .000, Δ% = 7.48), and speed (p = .000, Δ% = 3.39) capacities. Meanwhile, there were no considerable differences in the variables for the control group. According to the independent t-test results, a significant difference in effect between the SEST group and the CTRL group was revealed. The SEST group demonstrated marked differences in anaerobic, aerobic and speed variables with a p-value = 0.000. Conclusions. The study reveals that short-term Speed Endurance Soccer Training contributes to enhancing the physical performance of soccer players. However, caution should be exercised regarding the potential risk of hamstring injury in individuals with unprepared muscles.

Relationship between perceived physical literacy and obesity-related outcomes in adolescents: the EHDLA study.

The aim of the present study was to examine the relationship between perceived physical literacy and obesity-related outcomes among adolescents from Spain. This is a secondary cross-sectional analysis including a total sample of 845 Spanish adolescents (55.3% girls) aged 12-17 years from the Valle de Ricote (Region of Murcia) from the Eating Healthy and Daily Life Activities (EHDLA) project. Physical literacy was evaluated using the Spanish Perceived Physical Literacy Instrument for adolescents (S-PPLI). Body mass index was computed by taking the participants' body weight in kilograms and dividing it by the square of their height in meters, and body mass index (z score) and overweight/obesity and obesity were computed by the World Health Organization age- and sex-specific thresholds. Waist circumference was measured using a constant tension tape. Moreover, the waist-to-height ratio was calculated, and therefore, abdominal obesity was determined. Skinfold measurements were taken at the triceps and medial calf using calibrated steel calipers. In general, the overall trend was downward (i.e., the higher the PPLI score the lower the obesity-related indicators), with the approximate significance of smooth terms being statistically significant for all models examined (p < 0.001). Adolescents with lower perceived physical literacy (PPL) showed the highest estimated marginal means of body mass index, body mass index z score, waist circumference, waist-to-height ratio, and skinfold (triceps and calf) and predictive probabilities of having excess weight, obesity, and abdominal obesity, while their counterparts with high PPL had the lowest. In addition, significant differences were observed for all the obesity-related indications between adolescents with low PPL and those with medium PPL (p-adjusted < 0.05 for all indicators), as well as with those with high PPL (p-adjusted < 0.05 for all indicators). Moreover, these significant differences were also shown for most indicators between adolescents with medium PPL and those with high PPL (except for obesity). Physical literacy could play a crucial role in maintaining more desirable obesity-related outcomes in adolescents. Adolescents with high perceived physical literacy showed lower obesity-related indicators (i.e., body mass index, body mass index z score, waist circumference, waist-to-height ratio, skinfolds), as well as a lower probability of having excess weight, obesity, and abdominal obesity.

Validation of the Portuguese Version of the Perceived Physical Literacy Instrument.

The Perceived Physical Literacy Instrument (PPLI) has been the most adopted physical literacy instrument designed for adults to date, having been already translated to 5 languages. Still, despite its popularity, there is limited evidence of its psychometric properties. The aim of this study was to translate and adapt cross-culturally the PPLI to the Portuguese language and to analyze the psychometric properties of the Portuguese version in a sample of Portuguese-speaking adults. The study sample was composed of 434 participants (70% females) with a median age of 25 (18-39)years. Confirmatory factor analysis was used to assess psychometric properties of the scale. In addition, instrument assumptions between sexes through invariance testing were examined. Finally, concurrent validity, test-retest reliability, and test-retest agreement analyses were performed to gather additional evidence. The results of the present study generally supported the measurement model. The 9-item, 3-factor model presented a good fit to the data and adequate construct validity (χ2 = 82.859 [24], P < .001, comparative-fit index = .948, Tucker-Lewis index = .922, standardized root mean square residual = .049, root mean square error of approximation = .075). In addition, the scale presented concurrent validity. Some issues arose with measurement invariance and overtime consistency. Considering the lack of validated instruments, we suggest a fair use of Portuguese version of PPLI to access physical literacy in adults. This study contributes to the validation of the PPLI by providing evidence of its psychometric properties in the Portuguese-speaking adult population and facilitates comparative analysis with previous and future studies utilizing the PPLI instrument.