Photonic Resonator Research Articles

Generation principle for robust and regularly spaced resonant modes in a nontopological photonic crystal ring resonator

Generation principle for robust and regularly spaced resonant modes in a nontopological photonic crystal ring resonator

All-optical simultaneous OR and AND optical logic gates based on nonlinear photonic crystal ring resonator

Abstract An all-optical simultaneous OR and AND logic gates using the nonlinear Kerr effect and ring resonator based on a two-dimensional photonic crystal are proposed in this paper. The proposed structure has a resonant wavelength of 1551.3 nm and a power consumption (1 kW/μm2). The proposed structure is suitable for all-optical photonic integrations because of its simplicity and small size (23 μm x 30.4 μm). Moreover, the structure executes two logic operations without requiring an additional spare/control signal through a single structure, making fabrication easy. The total footprint of the photonic crystal ring resonator structure measures approximately 699 μm². A very high contrast ratio of 26.10 dB and 25.34 dB is obtained for the OR and AND logic gates, with response times equal to 2 ps and 0.67 ps, respectively. In addition, the calculated bit rates for OR and AND logic gates are approximately 0.5 and 1.5 Tbps, respectively. Using the Rsoft CAD commercial software, the FullWAVE and BandSOLVE module of the software is used for numerical and theoretical investigation of the structure.

Intraband cascade electroluminescence with weakly n-doped HgTe colloidal quantum dots.

Room temperature 6μm intraband cascade electroluminescence (EL) is demonstrated with lightly n-doped HgTe colloidal quantum dots of ∼8nm diameter deposited on interdigitated electrodes in a metal-insulator-metal device. With quantum dot films of ∼150nm thickness made by solid-state-ligand-exchange, the devices emit at 1600cm-1 (6.25μm), with a spectral width of 200cm-1, determined by the overlap of the 1Se-1Pe intraband transition of the quantum dots and the substrate photonic resonance. At the maximum current used of 20 mA, the bias was 30V, the external quantum efficiency was 2.7%, and the power conversion efficiency was 0.025%. Adding gold nano-antennas between the electrodes broadened the emission and increased the quantum efficiency to 4.4% and the power efficiency to 0.036%. For these films, the doping was about 0.1 electron/dot, the electron mobility was 0.02cm2V-1s-1, and the maximum current density was 0.04kAcm-2. Higher mobility films made by solution ligand exchange show a 20-fold increase in current density and a 10-fold decrease in EL efficiencies. Electroluminescence with weak doping is interesting for eventually achieving electrically driven stimulated emission, and the requirements for population inversion and lasing are discussed.

Enhanced four-band absorption in a tunable graphene subwavelength grating structure for photodetection

This paper investigates a sub-wavelength multilayer dielectric grating structure based on a simple metasurface, achieving dynamically switchable four-band absorption enhancement. This enhancement spans the visible to near-infrared (NIR) range, with absorption exceeding 90%, representing nearly a 40-fold increase over the intrinsic absorption of a single graphene layer. The contributions of guided-mode resonance (GMR), optical Tamm state (OTS), and photonic crystal defect cavity resonance to the absorption spectra are analyzed separately, offering a method for independent multi-channel signal extraction. Additionally, we explore the impact of structural parameters on the absorption response and examine the broad-spectrum multiband detection mechanism. This mechanism, explained through the integration of resonant cavity perturbation theory and the dynamic tuning of absorption efficiency via graphene's Fermi energy levels, results in an independently tunable optical system for four key operating bands. These properties make the structure suitable for applications such as multiband biomedical photodetectors or components in optoelectronic devices with multiple operating bands.

Crafting Nanostructured Hybrid Block Copolymer-Gold Nanoparticles by Confined Self-Assembly in Evaporative Droplets.

Hybrid organic-inorganic nanostructures offer significant potential for developing advanced functional materials with numerous technological applications. However, the fabrication process is often tedious and time-consuming. This study presents a facile method for fabricating block copolymer-based photonic microspheres incorporating plasmonic gold nanoparticles. Specifically, the confined self-assembly of poly(styrene)-b-poly(2-vinylpyridine) in emulsion droplets allows the formation of spherical, noniridescent, concentric lamellar structures, i.e., onion-like particles that are subsequently infiltrated with gold salt. Using ethanol as a preferential solvent allows the loading of metal ions exclusively into the poly(2-vinylpyridine) domains, which are subsequently reduced, leading to the in situ, spatially controlled formation of gold nanoparticles. The hybrid structures exhibit a well-defined photonic bandgap and plasmonic resonance at low gold concentrations. These results demonstrate the feasibility of fabricating optically active photonic structures comprising metal nanoparticles in a block copolymer array via a simple two-step fabrication process.

Photonic-Cavity-Enhanced Laser Writing of Color Centers in Diamond.

Color centers in diamond have widespread utility in quantum technologies, but their creation process remains stochastic in nature. Deterministic creation of color centers in device-ready diamond platforms can improve the yield, scalability, and integration. Recent work using pulsed laser excitation has shown impressive progress in deterministically creating defects in bulk diamond. Here, we extend this laser-writing process into nanophotonic devices etched into diamond membranes, including nanopillars and photonic resonators with writing and subsequent readout occurring in situ at cryogenic temperatures. We demonstrate the optically driven creation of carbon vacancy (GR1) and nitrogen vacancy (NV) centers in diamond nanopillars and observe enhanced photoluminescence collection from them. We also fabricate bullseye resonators and leverage their cavity modes to locally amplify the laser-writing field, yielding defect creation with picojoule write-pulse energies 100 times lower than those typically used in bulk diamond demonstrations.

Retraction Note: Demultiplexer design using photonic crystal ring resonator with high quality factor and less footprint for DWDM application

Retraction Note: Demultiplexer design using photonic crystal ring resonator with high quality factor and less footprint for DWDM application

Deterministic photon source of genuine three-qubit entanglement

Deterministic photon sources allow long-term advancements in quantum optics. A single quantum emitter embedded in a photonic resonator or waveguide may be triggered to emit one photon at a time into a desired optical mode. By coherently controlling a single spin in the emitter, multi-photon entanglement can be realized. We demonstrate a deterministic source of three-qubit entanglement based on a single electron spin trapped in a quantum dot embedded in a planar nanophotonic waveguide. We implement nuclear spin narrowing to increase the spin dephasing time to T2*≃33\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${T}_{2}^{*}\\simeq 33$$\\end{document} ns, which enables high-fidelity coherent optical spin rotations, and realize a spin-echo pulse sequence for sequential generation of spin-photon and spin-photon-photon entanglement. The emitted photons are highly indistinguishable, which is a key requirement for scalability and enables subsequent photon fusions to realize larger entangled states. This work presents a scalable deterministic source of multi-photon entanglement with a clear pathway for further improvements, offering promising applications in photonic quantum computing or quantum networks.

Design and simulation of an enhanced optical demultiplexer using photonic crystal resonators

The purpose of this paper is to examine the design, simulation, and optimization of a demultiplexer optical system using photonic crystal resonators. Utilizing the distinct properties of photonic crystals, the proposed device achieves high-quality resonances, efficient wavelength separation, and minimal crosstalk. These characteristics are crucial for enhancing the performance of dense wavelength division multiplexing (DWDM) systems, which require precise and efficient channel separation to manage increasing data traffic. Extensive simulations conducted with the RSoft CAD tool explore the impact of varying resonator parameters such as refractive index, geometric dimensions, and material composition on the device's performance. The results indicate substantial improvements in transmission efficiency and quality factor, with average values of 98.675% and 3131.125, respectively. Furthermore, the ability to fine-tune these parameters allows for the customization of the demultiplexer to specific wavelength ranges, making it highly adaptable for various telecommunications applications. This research aims to propel the development of compact, high-performance photonic devices that meet the growing demands of modern communication networks, ultimately contributing to more efficient and reliable optical communication systems.

A Highly Sensitive D-Shaped PCF-SPR Sensor for Refractive Index and Temperature Detection.

A novel highly sensitive D-shaped photonic crystal fiber-based surface plasmon resonance (PCF-SPR) sensor for dual parameters of refractive index and temperature detecting is proposed. A PCF cladding polishing provides a D-shape design with a gold (Au) film coating for refractive index (RI) sensing (Core 1) and a composite film of silver (Ag) and polydimethylsiloxane (PDMS) for temperature sensing (Core 2). Comsol Multiphysics 5.5 is used to design and simulate the proposed sensor by the finite element method (FEM). The proposed sensor numerically provides results with maximum wavelength sensitivities (WSs) of 51,200 and 56,700 nm/RIU for Core 1 and 2 as RI sensing while amplitude sensitivities are -98.9 and -147.6 RIU-1 with spectral resolution of 1.95 × 10-6 and 1.76 × 10-6 RIU, respectively. Notably, wavelength sensitivity of 17.4 nm/°C is obtained between -20 and -10 °C with resolution of 5.74 × 10-3 °C for Core 2 as temperature sensing. This sensor can efficiently work in the analyte and temperature ranges of 1.33-1.43 RI and -20-100 °C. Due to its high sensitivity and wide detection ranges, both in T and RI sensing, it is a promising candidate for a variety of applications, including chemical, medical, and environmental detection.

Portable, smartphone-linked, and miniaturized photonic resonator absorption microscope (PRAM Mini) for point-of-care diagnostics.

We report the design, development, and characterization of a miniaturized version of the photonic resonator absorption microscope (PRAM Mini), whose cost, size, and functionality are compatible with point-of-care (POC) diagnostic assay applications. Compared to previously reported versions of the PRAM instrument, the PRAM Mini components are integrated within an optical framework comprised of an acrylic breadboard and plastic alignment fixtures. The instrument incorporates a Raspberry Pi microprocessor and Bluetooth communication circuit board for wireless control and data connection to a linked smartphone. PRAM takes advantage of enhanced optical absorption of ∼80 nm diameter gold nanoparticles (AuNP) whose localized surface plasmon resonance overlaps with the ∼625 nm resonant reflection wavelength of a photonic crystal (PC) surface. When illuminated with wide-field low-intensity collimated light from a ∼617 nm wavelength red LED, each AuNP linked to the PC surface results in locally reduced reflection intensity, which is visualized by observing dark spots in the PC-reflected image with an inexpensive CMOS image sensor. Each AuNP in the image field of view can be easily counted with digital resolution. We report upon the selection of optical/electronic components, image processing algorithm, and contrast achieved for single AuNP detection. The instrument is operated via a wireless connection to a linked mobile device using a custom-developed software application that runs on an Android smartphone. As a representative POC application, we used the PRAM Mini as the detection instrument for an assay that measures the presence of antibodies against SARS-CoV-2 infection in cat serum samples, where each dark spot in the image represents a complex between one immobilized viral antigen, one antibody molecule, and one AuNP tag. With dimensions of 23 × 21 × 10 cm3, the PRAM Mini offers a compact detection instrument for POC diagnostics.

Photonic crystal assisted excitation of surface plasmons: a high-resolution refractive index sensor based on a gold spiral in a photonic crystal resonator

Photonic crystal assisted excitation of surface plasmons: a high-resolution refractive index sensor based on a gold spiral in a photonic crystal resonator

High brightness terahertz quantum cascade laser with near-diffraction-limited Gaussian beam

High-power terahertz (THz) quantum cascade laser, as an emerging THz solid-state radiation source, is attracting attention for numerous applications including medicine, sensing, and communication. However, due to the sub-wavelength confinement of the waveguide structure, direct beam brightness upscaling with device area remains elusive due to several mode competition and external optical lens is normally used to enhance the THz beam brightness. Here, we propose a metallic THz photonic crystal resonator with a phase-engineered design for single mode surface emission over a broad area. The quantum cascade surface-emitting laser is capable of delivering an output peak power over 185 mW with a narrow beam divergence of 4.4° × 4.4° at 3.88 THz. A high beam brightness of 1.6 × 107 W sr−1m−2 with near-diffraction-limited M2 factors of 1.4 in both vertical and lateral directions is achieved from a large device area of 1.6 × 1.6 mm2 without using any optical lenses. The adjustable phase shift between the lattices enables a stable and high-intensity surface emission over a broad device area, which makes it an ideal light extractor for large-scale THz emitters. Our research paves the way to high brightness solid-state THz lasers and facilitates new applications in standoff THz imaging, detection, and diagnosis.

Dynamic and large field of view photonic resonator absorption microscopy for ultrasensitive digital resolution detection of nucleic acid and protein biomarkers

In this paper, we describe a biosensing instrument based on our previously developed photonic resonator absorption microscope (PRAM) that incorporates autofocus, digital representation of the gold nanoparticle (AuNP) accumulation, and the ability to gather time-series image sequences of AuNP attachment and detachment from the photonic crystal (PC) surface. The combined capabilities are used to fully automate PRAM image collection during biomolecular assays to enable tiling of PRAM images to provide millimeter-scale field of view. The instrument can also gather PRAM “movies” that enables digital showcasing and dynamic counting AuNPs as they arrive and depart from the PC surface. We utilize the capabilities in the context of two biomolecular assays for detection of protein biomarkers in a conventional AuNP-tagged sandwich format. Utilizing dynamic counting of AuNP attachment and detachment events during the assay we present a detection for microRNA-375 (miRNA-375) down to 1 aM with a 10-min, room temperature, enzyme-free approach, while revealing characteristics of the binding-rate and unbinding-rate of the biomolecular interactions. Our instrument can potentially find broad applications in multiplexed point-of-care diagnostic testing, and as a general-purpose tool for quantitative characterization of biomolecular binding kinetics with single-molecule resolution.

Deep learning based on the new loss metric for inverse design of photonic resonators

Deep learning based on the new loss metric for inverse design of photonic resonators

Enhanced vertical second harmonic generation from layered GaSe coupled to photonic crystal circular Bragg resonators

Abstract Two-dimensional (2D) layered materials without centrosymmetry, such as GaSe, have emerged as promising novel optical materials due to large second-order nonlinear susceptibilities. However, their nonlinear responses are severely limited by the short interaction between the 2D materials and light, which should be improved by coupling them with photonic structures with strong field confinement. Here, we theoretically design photonic crystal circular Bragg gratings (CBG) based on hole gratings with a quality factor as high as Q = 8 × 103, a mode volume as small as V = 1.18 (λ/n)3, and vertical emission of light field in silicon nitride thin film platform. Experimentally, we achieved a Q value up to nearly 4 × 103, resulting in a 1,200-fold enhancement of second harmonic generation from GaSe flakes with a thickness of 50 nm coupling to the CBG structures under continuous-wave excitation. Our work endows silicon-based photonic platforms with significant second-order nonlinear effect, which is potentially applied in on-chip quantum light sources and nonlinear frequency conversion.

Simulation analysis of a photonic crystal fiber refractive index sensor based on a double-layer film structure and surface plasmon resonance technology

A photonic crystal fiber surface plasmon resonance sensor based on a double-layer membrane structure is designed and analyzed. In the simple sensing structure with only one air hole size, TiO2 and Au layers with specific thicknesses are sequentially coated on the optical fiber to form a double-layer structure. The sensing characteristics of the double-layer membrane structure are studied by the finite element method. Compared to the single-layer membrane structure, the double-layer membrane sensor has significant sensing properties such as a better wavelength sensitivity and a smaller full width at half maximum in the loss spectrum. In the refractive index range between 1.37 and 1.43, the maximum wavelength sensitivity and average wavelength sensitivity of the sensor are 19,900 nm/RIU and 7417 nm/RIU, respectively, and the resolution can be up to 5.03×10−6RIU. The proposed photonic crystal fiber optic sensor achieves high performance with a simpler sensing structure than previous photonic crystal fiber optic sensors, and eliminates the step of polishing, which will greatly reduce the difficulty of actual fabrication and the error due to uneven polishing. The results show that the photonic crystal fiber optic sensor with a double-layer membrane structure has excellent performance. Due to its high sensitivity and resolution, it has great potential for applications in environmental monitoring, biosensing and chemical sensing.

Photonic crystal-connected bidirectional micro-ring resonator array for duplex mode and wavelength channel (de)multiplexing

The progress of on-chip optical communication relies on integrated multi-dimensional mode (de)multiplexers to enhance communication capacity and establish comprehensive networks. However, existing multi-dimensional (de)multiplexers, involving modes and wavelengths, face limitations due to their reliance on single-directional total internal reflection and multi-level mode conversion based on directional coupling principles. These constraints restrict their potential for full-duplex functionality and highly integrated communication. We solve these problems by introducing a photonic-like crystal-connected bidirectional micro-ring resonator array (PBMRA) and apply it to duplex mode-wavelength multiplexing communication. The directional independence of total internal reflection and the cumulative effect of the subwavelength-scale pillar within the single-level photonic crystal enable bidirectional mode and wavelength multiplexed signals to transmit among multi-pair nodes without interference, improving on-chip integration in single-level mode conversion. As a proof of concept, we fabricated a nine-channel bidirectional multi-dimensional (de)multiplexer, featuring three wavelengths and three TE modes, compactly housed within a footprint of 80 μm×80 μm, which efficiently transmits QPSK-OFDM signals at a rate of 216 Gbit/s, achieving a bit error rate lower than 10−4. Leveraging the co-ring transmission characteristic and the orthogonality of the mode-wavelength channel, this (de)multiplexer also enables a doubling of communication capacity using two physical transmission channels.

Filling the simulation-to-reality gap: high-degree-of-freedom AI-optimized photonic crystal nanobeam resonators with fabrication tolerance.

In this work, we unveil a novel, to the best of our knowledge, AI-based design method (AIDN1) specifically developed for photonic crystal resonator designs, capable of handling complex designs with over 10 degrees of freedom (DoFs) and considering practical fabrication uncertainties to minimize the common simulation-to-reality (sim2real) gap. Especially, we introduce an ultrashort (<5 µm) curved nanobeam resonator, which obtains an ultrahigh theoretical quality factor (Q-factor) of 2 × 107 and maintains a theoretical Q-factor above 105 even under high fabrication variations. Importantly, we emphasize that AIDN1 is generalizable and our work serves as a solid foundation for future laser fabrication endeavors beyond the realm of ultrashort 1D photonic crystal (PhC) resonators.

Chiral absorption enhancement via critically coupled resonances in atomically thin photonic crystal exciton-polaritons.

Atomically thin transition metal dichalcogenides (TMDS) offer a promising route to the scaling down of optoelectronic devices to the ultimate thickness limit. But the weak light-matter interaction caused by their atomically thin nature makes them inevitably rely on external photonic structures to enhance optical absorption. Here, we report chiral absorption enhancement in atomically thin tungsten diselenide (WSe2) using chiral resonances in photonic crystal (PhC) nanostructures patterned directly in WSe2 itself. We show that the quality factors (Q factors) of the resonances grow exponentially as the PhC thickness approaches atomic limit. As such, the strong interaction of high Q factor photonic resonance with the coexisting exciton resonance in WSe2 results into self-coupled exciton-polaritons. By balancing the light coupling and absorption rates, the incident light can critically couple to chiral resonances in WSe2 PhC exciton-polaritons, leading to the theoretically limited 50% optical absorptance with over 84% circular dichroism (CD).