Photon Upconversion Research Articles

Upconversion photoluminescence of monolayer WSe2 with biaxial strain tuning.

Mechanical strain can be used to tune the optical properties of monolayer transition metal dichalcogenides (1L-TMDs). Here, upconversion photoluminescence (UPL) from 1L-WSe2 flakes is tuned with biaxial strain induced by cruciform bending and indentation method. It is found that the peak position of UPL is redshifted by around 24 nm as the applied biaxial strain increases from 0% to 0.51%. At the same time, the UPL intensity increases exponentially for the upconversion energy difference that lies within a broad range between -157 meV to -37 meV. The observed linear and sublinear power dependence of UPL emission in 1L-WSe2 with and without biaxial strain at three different excitation wavelengths of 784 nm, 800 nm, and 820 nm indicates the multiphonon-assisted one-photon upconversion emission process. The results of strain-dependent UPL emission from 1L-TMDs pave a unique path to the advances in photon upconversion applications and optoelectronic devices.

Aggregation-Induced Fluorescence Upconversion of Pyrene under Low Fluence: In Solutions and Polymeric Nanoparticles.

In this study, aggregation-induced photon upconversion (iPUC) is demonstrated in the small polyaromatic molecule, pyrene. In binary-solvent mixtures, water, which induces the aggregation of polyaromatic molecules, assisted in triplet-triplet annihilation-based upconversion. No upconverted emission was observed in a dry solvent. Although upconverted emission in the absence of a triplet sensitizer was assigned to pyrene-aggregate-induced sensitization, the presence of a triplet sensitizer enhanced the upconversion efficiency. This experimental finding was further simulated to explore the possibility of iPUC in the condensed-phase polymer matrix. We studied 2-aminoethyl methacrylate hydrochloride-polystyrene copolymer nanoparticles embedded with the molecular upconversion system. The nanoparticle iPUC agreed with the proposition that water domains were present in polymer nanoparticles and helped aggregate pyrene in the host polymer. Despite the low systemic upconversion efficiency, this study provides a method for achieving fluorescence upconversion in relatively simple systems.

Janus Micromotors for Photophoretic Motion and Photon Upconversion Applications Using a Single Near-Infrared Wavelength.

External stimuli can trigger changes in temperature, concentration, and momentum between micromotors and the medium, causing their propulsion and enabling them to perform different tasks with improved kinetic efficiencies. Light-activated micromotors are attractive systems that achieve improved motion and have the potential for high spatiotemporal control. Photophoretic swarming motion represents an attractive means to induce micromotor movement through the generation of temperature gradients in the medium, enabling the micromotors to move from cold to hot regions. The micromotors studied herein are assembled with Fe3O4 nanoparticles, and NaGdF4:Yb3+,Er3+/NaGdF4:Yb3+ and LiYF4:Yb3+,Tm3+ upconverting nanoparticles. The Fe3O4 nanoparticles were localized to one hemisphere to produce a Janus architecture that facilitates improved upconversion luminescence with the upconverting nanoparticles distributed throughout. Under 976 nm excitation, Fe3O4 nanoparticles generate the temperature gradient, while the upconverting nanoparticles produce visible light that is used for micromotor motion tracking and triggering of reactive oxygen species generation. As such, the motion and application of the micromotors are achieved using a single excitation wavelength. To demonstrate the practicality of this system, curcumin was adsorbed to the micromotor surface and degradation of Rhodamine B was achieved with kinetic rates that were over twice as fast as the static micromotors. The upconversion luminescence was also used to track the motion of the micromotors from a single image frame, providing a convenient means to understand the trajectory of these systems. Together, this system provides a versatile approach to achieving light-driven motion while taking advantage of the potential applications of upconversion luminescence such as tracking and detection, sensing, nanothermometry, particle velocimetry, photodynamic therapy, and pollutant degradation.

Upconversion Material-Plasmonic Metal-Semiconductor Ternary Heteronanostructures for Wide-Range Solar-to-Chemical Energy Conversion.

Harvesting full-spectrum solar energy is a critical issue for developing high-performance photocatalysts. Here, we report a hierarchical heteronanostructure consisting of upconverting, plasmonic, and semiconducting materials as a solar-to-chemical energy conversion platform that can exploit a wide range of sunlight (from ultraviolet (UV) to near-infrared). Lanthanide-doped NaYF4 nanorod-spherical Au nanocrystals-TiO2 ternary hybrid nanostructures with a well-controlled configuration and intimate contact between the constituent materials could be synthesized by a wet-chemical method. Notably, the prepared ternary hybrids exhibited high photocatalytic activity for the H2 evolution reaction under simulated solar and near-infrared light irradiation due to their broadband photoresponsivity and strong optical interaction between the constituents. Through systematic studies on the mechanism of energy transfer during the photocatalysis of the ternary hybrids, we revealed that upconverted photon energy from the upconversion domain transfers to the Au and TiO2 domains primarily through the Förster resonance energy transfer process, resulting in enhanced photocatalysis.

Detour to success: photoswitching via indirect excitation.

Photoswitchable molecules that undergo nanoscopic changes upon photoisomerisation can be harnessed to control macroscopic properties such as colour, solubility, shape, and motion of the systems they are incorporated into. These molecules find applications in various fields of chemistry, physics, biology, and materials science. Until recently, research efforts have focused on the design of efficient photoswitches responsive to low-energy (red or near-infrared) irradiation, which however may compromise other molecular properties such as thermal stability and robustness. Indirect isomerisation methods enable photoisomerisation with low-energy photons without altering the photoswitch core, and also open up new avenues in controlling the thermal switching mechanism. In this perspective, we present the state of the art of five indirect excitation methods: two-photon excitation, triplet sensitisation, photon upconversion, photoinduced electron transfer, and indirect thermal methods. Each impacts our understanding of the fundamental physicochemical properties of photochemical switches, and offers unique application prospects in biomedical technologies and beyond.

Triplet-triplet annihilation-based photon upconversion using nanoparticles and nanoclusters.

The phenomenon of photon upconversion (UC), generating high-energy photons from low-energy photons, has attracted significant attention. In particular, triplet-triplet annihilation-based UC (TTA-UC) has been achieved by combining the excitation states of two types of molecules, called the sensitizer and emitter (or annihilator). With TTA-UC, it is possible to convert weak, incoherent near-infrared (NIR) light, which constitutes half of the solar radiation intensity, into ultraviolet and visible light that are suitable for the operation of light-responsive functional materials or devices such as solar cells and photocatalysts. Research on TTA-UC is being conducted worldwide, often employing materials with high intersystem crossing rates, such as metal porphyrins, as sensitizers. This review summarizes recent research and trends in triplet energy transfer and TTA-UC for semiconductor nanoparticles or nanocrystals with diameters in the nanometer range, also known as quantum dots, and for ligand-protected metal nanoclusters, which have even smaller well-defined sub-nanostructures. Concerning nanoparticles, transmitter ligands have been applied on the surface of the nanoparticles to efficiently transfer triplet excitons formed inside the nanoparticles to emitters. Applications are expanding to solid-state UC devices that convert NIR light to visible light. Additionally, there is active research in the development of sensitizers using more cost-effective and environmentally friendly elements. Regarding metal nanoclusters, methods have been established for the evaluation of excited states, deepening the understanding of luminescent properties and excited relaxation processes.

Tailoring sensitization properties and improving near-infrared photon upconversion performance through alloying in superatomic molecular Au25 nanoclusters.

Noble-metal nanoclusters (NCs) protected by organic ligands have recently come to the forefront as potent triplet sensitizers for photon upconversion (UC) via triplet-triplet annihilation (TTA), owing to their capacity for atomic-level photophysical property customization. Among these, the rod-shaped bi-icosahedral [Au25(PPh3)10(S-C2H4Ph)5Cl2]2+ (Au-rod) NC is a particularly iconic superatomic molecular NC, recently identified as a near-infrared (NIR)-absorbing sensitizer for TTA-UC. In this study, we synthesized Cu-doped NCs, [Au25-xCux(PPh3)10(S-C2H4Ph)5Cl2]2+ (AuCu-rod), and paired them with 9,10-bis(phenylethynyl)anthracene (BPEA) annihilator/emitter to explore the impact of Cu-doping on the triplet sensitization and NIR-UC performance. The triplet state of AuCu-rod, with lifetime of 3 μs, exhibited a modest blue shift compared to the Au-rod, resulting in the increment in the driving force for triplet energy transfer (TET) to the BPEA acceptor. The TET rate constant was determined to be 5.0 × 107 M-1 s-1, which is an order of magnitude higher than the rate constant for the Au-rod/BPEA pair. This improvement has led to a remarkable increase in the TET efficiency. Notably, the AuCu-rod/BPEA pair facilitated the efficient UC of 805 nm NIR light into 510 nm visible light, realizing a large anti-Stokes shift close to 0.9 eV. The UC internal quantum yield of this combination was determined to be 2.33 ± 0.05%, marking a fivefold enhancement over the Au-rod sensitizer (0.49%). Thus, alloying NC sensitizers offers a promising route to enhance UC performance by tuning the triplet state energy and optimizing the compatibility between the sensitizer and annihilator. Additionally, in this series of experiments, the formation of small amounts of BPEA microaggregates was observed. These aggregates did not undergo singlet fission and could retain multiple long-lived triplet excitons. This characteristic facilitated TTA among triplet excitons, resulting in efficient NIR-to-visible UC emission.

Photophysics and its application in photon upconversion.

Photoluminescence (PL) upconversion is a phenomenon involving light-matter interaction, where the energy of the emitted photons is higher than that of the incident photons. PL upconversion has promising applications in optoelectronic devices, displays, photovoltaics, imaging, diagnosis and treatment. In this review, we summarize the mechanism of PL upconversion and ultrafast PL physical processes. In particular, we highlight the advances in laser cooling, biological imaging, volumetric displays and photonics.

Temperature sensing performance of Er3+:Yb3+ co-doped CaF2 ceramic powders using near-infrared light

Luminescent materials for application in temperature sensing have caught a lot of interest in recent years. Particularly erbium (Er3+)-doped fluoride-based materials (EFM), which are readily accessible by near-infrared (NIR) excitation to produce efficient photon conversion. It has been established that ytterbium (Yb3+) may improve the performance of EFMs in both bulk and nanostructured forms by energy transfer channels among rare-earth ions in interstitial clusters. In this work, a comprehensive analysis of the Er3+:Yb3+:CaF2 crystalline structure, photoluminescence, and energy transfer from Yb3+ to Er3+ is presented for powders prepared by combustion synthesis. The Er3+:Yb3+:CaF2 powders display exceptional photon down-shift and up-conversion when exposed to NIR light (λ = 975 nm). The luminescence spectral change of the NIR emission around 1.5 μm, which corresponds to the Er3+ electronic transition 4I13/2 → 4I15/2, was investigated in a temperature range of 298–423 K for application in temperature sensing of biological systems exploring the third biological window. The luminescence intensity ratio technique was applied to the thermally coupled Stark sublevels of states 4I13/2 and 4I15/2 with the highest estimated temperature relative sensitivity being around 0.4 %/K at 298 K.

Triplet properties and intersystem crossing mechanism of PtAg28 nanocluster sensitizers achieving low threshold and efficient photon upconversion.

Ligand-protected metal nanoclusters have emerged as a promising platform for providing sensitizers for triplet-triplet annihilation upconversion (TTA-UC). Herein, we report [PtAg28(BDT)12]4- (PtAg28; BDT = 1,3-benzenedithiolate) as a sensitizer enabling TTA-UC at low excitation intensities. PtAg28 exhibits a long-lived triplet state (approximately 7 μs) generated with a 100% intersystem crossing (ISC) quantum yield. The mechanism driving this efficient ISC was unveiled with the aid of theoretical calculations. Specifically, the S1-T1 ISC reveals a small spin-orbit coupling (SOC) matrix element, attributed to their similar electron configuration. In contrast, the T2 state, which is energetically close to S1, features a hole distribution derived from the Py superatomic orbital of the icosahedral Pt@Ag12 core. This distribution enables direct SOC based on the orbital angular momentum change from the S1 state with a Pz-derived hole distribution. Consequently, the efficient ISC was rationalized by the S1 → T2 → T1 pathway. The T1 state possesses a metal core-to-surface metal charge transfer character, facilitating triplet energy transfer and conferring superior sensitization ability. Leveraging these characteristics, the combination of PtAg28 sensitizer with a 9,10-diphenylanthracene annihilator/emitter attained an extremely low UC threshold of 0.81 mW cm-2 at 532 nm excitation, along with efficient green-to-blue TTA-UC with an internal quantum yield (ΦUCg) of 12.2% (50% maximum). This results in a pseudo-first-order TTA process with strong UC emission under 1-sun conditions.

Near-infrared-driven upconversion nanoparticles with photocatalysts through water-splitting towards cancer treatment.

Water splitting is promising, especially for energy and environmental applications; however, there are limited studies on the link between water splitting and cancer treatment. Upconversion nanoparticles (UCNPs) can be used to convert near-infrared (NIR) light to ultraviolet (UV) or visible (Vis) light and have great potential for biomedical applications because of their profound penetration ability, theranostic approaches, low self-fluorescence background, reduced damage to biological tissue, and low toxicity. UCNPs with photocatalytic materials can enhance the photocatalytic activities that generate a shorter wavelength to increase the tissue penetration depth in the biological microenvironment under NIR light irradiation. Moreover, UCNPs with a photosensitizer can absorb NIR light and convert it into UV/vis light and emit upconverted photons, which excite the photoinitiator to create H2, O2, and/or OH˙ via water splitting processes when exposed to NIR irradiation. Therefore, combining UCNPs with intensified photocatalytic and photoinitiator materials may be a promising therapeutic approach for cancer treatment. This review provides a novel strategy for explaining the principles and mechanisms of UCNPs and NIR-driven UCNPs with photocatalytic materials through water splitting to achieve therapeutic outcomes for clinical applications. Moreover, the challenges and future perspectives of UCNP-based photocatalytic materials for water splitting for cancer treatment are discussed in this review.

Cross Relaxation Enables Spatiotemporal Color-Switchable Upconversion in a Single Sandwich Nanoparticle for Information Security.

Smart control of ionic interaction dynamics offers new possibilities for tuning and editing luminescence properties of lanthanide-based materials. However, it remains a daunting challenge to achieve the dynamic control of cross relaxation mediated photon upconversion, and in particular the involved intrinsic photophysics is still unclear. Herein, this work reports a conceptual model to realize the color-switchable upconversion of Tm3+ through spatiotemporal control of cross relaxation in the design of NaYF4:Gd@NaYbF4:Tm@NaYF4 sandwich nanostructure. It shows that cross relaxation plays a key role in modulating upconversion dynamics and tuning emission colors of Tm3+. Interestingly, it is found that there is a short temporal delay for the occurrence of cross relaxation in contrast to the spontaneous emission as a result of the slight energy mismatch between relevant energy levels. This further enables a fine emission color tuning upon non-steady state excitation. Moreover, a characteristic quenching time is proposed to describe the temporal evolution of cross relaxation quantitatively. These findings present a deep insight into the physics of ionic interactions in heavy doping systems, and also show great promise in frontier applications including information security, anti-counterfeiting and nanophotonics.

Luminescent and Photoredox-Active Molybdenum(0) Complexes Competitive with Isoelectronic Ruthenium(II) Polypyridines.

Ruthenium(II) complexes with chelating polypyridine ligands are among the most frequently investigated compounds in photophysics and photochemistry, owing to their favorable luminescence and photoredox properties. Equally good photoluminescence performance and attractive photocatalytic behavior is now achievable with isoelectronic molybdenum(0) complexes. The zero-valent oxidation state of molybdenum is stabilized by carbonyl or isocyanide ligands, and metal-to-ligand charge transfer (MLCT) excited states analogous to those in ruthenium(II) complexes can be established. Microsecond MLCT excited-state lifetimes and photoluminescence quantum yields up to 0.2 have been achieved in solution at room temperature, and the emission wavelength has become tunable over a large range. The molybdenum(0) complexes are stronger photoreductants than ruthenium(II) polypyridines and can therefore perform more challenging chemical reductions. The triplet nature of their luminescent MLCT states allows sensitization of photon upconversion via triplet-triplet annihilation, to convert low-energy input radiation into higher-energy output fluorescence. This review summarizes the current state of the art concerning luminescent molybdenum(0) complexes and highlights their application potential. Molybdenum is roughly 140 times more abundant and far cheaper than ruthenium, hence this research is relevant in the greater context of finding more sustainable alternatives to using precious and rare transition metals in photophysics and photochemistry.

Luminescent and Photoredox‐Active Molybdenum(0) Complexes Competitive with Isoelectronic Ruthenium(II) Polypyridines

AbstractRuthenium(II) complexes with chelating polypyridine ligands are among the most frequently investigated compounds in photophysics and photochemistry, owing to their favorable luminescence and photoredox properties. Equally good photoluminescence performance and attractive photocatalytic behavior is now achievable with isoelectronic molybdenum(0) complexes. The zero‐valent oxidation state of molybdenum is stabilized by carbonyl or isocyanide ligands, and metal‐to‐ligand charge transfer (MLCT) excited states analogous to those in ruthenium(II) complexes can be established. Microsecond MLCT excited‐state lifetimes and photoluminescence quantum yields up to 0.2 have been achieved in solution at room temperature, and the emission wavelength has become tunable over a large range. The molybdenum(0) complexes are stronger photoreductants than ruthenium(II) polypyridines and can therefore perform more challenging chemical reductions. The triplet nature of their luminescent MLCT states allows sensitization of photon upconversion via triplet‐triplet annihilation, to convert low‐energy input radiation into higher‐energy output fluorescence. This review summarizes the current state of the art concerning luminescent molybdenum(0) complexes and highlights their application potential. Molybdenum is roughly 140 times more abundant and far cheaper than ruthenium, hence this research is relevant in the greater context of finding more sustainable alternatives to using precious and rare transition metals in photophysics and photochemistry.

Developments and Challenges Involving Triplet Transfer across Organic/Inorganic Heterojunctions for Singlet Fission and Photon Upconversion.

In this Perspective, we provide an overview of recent advances in harvesting triplets for photovoltaic and photon upconversion applications from two angles. In singlet fission-sensitized solar cells, the triplets are harvested through a low band gap semiconductor such as Si. Recent literature has shown how a thin interlayer or orientation of the singlet fission molecule can successfully lead to triplet transfer. On the other hand, the integration of transition metal dichalcogenides (TMDCs) with suitable organic molecules has shown triplet-triplet annihilation upconversion (TTA-UC) of near-infrared photons. We consider the theoretical aspect of the triplet transfer process between a TMDC and organic semiconductors. We discuss possible bottlenecks that can limit the harvesting of energy from triplets and perspectives to overcome these.

Robust plastic waste classification using wavelet transform multi-resolution analysis and convolutional neural networks

Mid-infrared spectroscopy (MIR) using photon up-conversion provides advantages over near-infrared spectroscopy (NIR) for plastic waste recycling, including comparable data collection speed and the ability to detect black plastics. However, high-speed MIR spectra suffer from the presence of significant noise. While convolutional neural networks (CNNs) have been utilized for accurate classification of noisy MIR spectra, the analysis of extracted features by the CNN has received less attention. In this study, we analyzed features extracted by a CNN from high-speed MIR spectra collected at 200 spectra per second. Visualizing salient features through the Grad-CAM method revealed that, although the CNN model achieved 100% accuracy, the predictions were not reliable or robust, as the model is susceptible to noise interference. To address this limitation, we propose a wavelet transform-based multi-resolution analysis (MRA) as a preprocessing method for noisy MIR spectra. We show that MRA reconstruction effectively captures features related to characteristic IR peaks, enabling the CNN model to extract informative features from noisy MIR spectra and significantly improves the prediction fidelity and robustness.

Solar-driven photodegradation of ciprofloxacin and E. coli growth inhibition using a Tm3+ upconverting nanoparticle-based polymer composite

Solar-driven photocatalysis is of great interest in terms of a sustainable use of energy and its application in wastewater treatment. The UV light-driven photogeneration of H2O2 by solar irradiation is an advanced strategy for the treatment of bacteria and recalcitrant pollutants in wastewater, but suffers from low efficiencies. In this work, a solar-driven multifunctional nanocomposite consisting of Tm3+ upconverting nanoparticles, poly(vinyl alcohol), poly(acrylic acid) and hydroxylated sulfonated poly(ether ether ketone) was prepared. The components were crosslinked via a heating treatment at 170 °C, resulting in a non-leaching porous material. This nanocomposite exhibited excellent adsorption ability (89 % in 150 min) toward a 100 mg/L ciprofloxacin aqueous solution and proved to photodegrade it (50 %) upon 4 h artificial solar irradiation, exploiting photon upconversion processes. Moreover, an 80 % bactericidal effect against E. coli was registered upon sunlight irradiation. Altogether, these results suggest the feasibility of a solar-driven wastewater treatment based on upconverting nanoparticles.

A Study of Redox Mediator Types and Their Quenching Effects on the Triplet–Triplet Annihilation Photon Upconversion Process

A Study of Redox Mediator Types and Their Quenching Effects on the Triplet–Triplet Annihilation Photon Upconversion Process

Uncovering the mechanisms of efficient upconversion in two-dimensional perovskites with anti-Stokes shift up to 220 meV.

Phonon-assisted photon upconversion holds great potential for numerous applications, e.g., optical refrigeration. However, traditional semiconductors face energy gain limitations due to thermal energy, typically achieving only ~25 milli-electron volts at room temperature. Here, we demonstrate that quasi-two-dimensional perovskites, with a soft hybrid organic-inorganic lattice, can efficiently upconvert photons with an anti-Stokes shift exceeding 200 milli-electron volts. By using microscopic transient absorption measurements and density functional theory calculations, we explicate that the giant energy gain stems from strong lattice fluctuation leading to a picosecond timescale transient band energy renormalization with a large energy variation of around ±180 milli-electron volts at room temperature. The motion of organic molecules drives the deformation of inorganic framework, providing energy and local states necessary for efficient upconversion within a time constant of around 1 ps. These results establish a deep understanding of perovskite-based photon upconversion and offer previously unknown insights into the development of various upconversion applications.

First-Row d6 Metal Complex Enables Photon Upconversion and Initiates Blue Light-Dependent Polymerization with Red Light.

Photosensitizers for sensitized triplet-triplet annihilation upconversion (sTTA-UC) often rely on precious heavy metals, whereas coordination complexes based on abundant first-row transition metals are less common. This is mainly because long-lived triplet excited states are more difficult to obtain for 3d metals, particularly when the d-subshell is only partially filled. Here, we report the first example of sTTA-UC based on a 3d6 metal photosensitizer yielding an upconversion performance competitive with precious metal-based analogues. Using a newly developed Cr0 photosensitizer featuring equally good photophysical properties as an OsII benchmark complex in combination with an acetylene-decorated anthracene annihilator, red-to-blue upconversion is achievable. The upconversion efficiency under optimized conditions is 1.8 %, and the excitation power density threshold to reach the strong annihilation limit is 5.9 W/cm2 . These performance factors, along with high photostability, permit the initiation of acrylamide polymerization by red light, based on radiative energy transfer between delayed annihilator fluorescence and a blue light absorbing photo-initiator. Our study provides the proof-of-concept for photon upconversion with elusive first-row analogues of widely employed precious d6 metal photosensitizers, and for their application in photochemical reactions triggered by excitation wavelengths close to near-infrared.