Photoionization Mass Spectrometry Research Articles

Characterizing carbonaceous aerosols in residential coal combustion: Insights from thermal/spectral carbon analyzer coupled with photoionization mass spectrometry analysis

This study aims to identify unique signatures from residential coal combustion in China across various combustion conditions and coal types. Using a Thermal/Spectral Carbon Analyzer with a Photoionization Time-of-Flight Mass Spectrometer (TSCA-PI-TOF-MS), we focus on the optical properties and organic mass spectra of the emissions. Bituminous coal emerged as the primary emitter of total carbon, releasing 729 μg C/mg PM2.5 under smoldering and 894 μg C/mg PM2.5 under flaming. Carbon fractions mainly comprised OC1 and OC2, except for anthracite's dominance of EC1 under smoldering. Pyrolysis carbon absorption shifted from 405, 445 and 532 nm during smoldering to near-infrared bands (635–980 nm) during flaming for both bituminous and anthracite coal. Conversely, clean coal exhibited an inverse trend, attributed to additives enhancing oxygen-containing organic compounds and long-chain hydrocarbons released in charring process. Sample of bituminous coal began charring at OC3 step, while anthracite began earlier at OC2 step, particularly pronounced under flaming. Clean coal displayed unconventional charring at OC1 step under smoldering condition, producing signature compounds like butenal, methylfuran, furanylalcohol, and naphthol. The mass spectra of bituminous coal featured characteristic peaks, including m/z 192 (methylphenanthrene), 206, 220 (alkylated phenanthrenes), and 234 (retene). Anthracite coal showed a potential tracer at m/z 223, shifting from OC1 in smoldering to OC2 in flaming. Clean coal under flaming condition exhibited elevated levels of aromatic compounds, indicating potential toxicity, with peaks at m/z 178 (phenanthrene), 228 (chrysene/benz[a]anthracene), 234 (retene), 242 (methylchrysene), and 252 (benzo[a]pyrene, benzo[k]fluoranthene). Results also showed that the broader mass spectra range in the OC3 and OC4 steps across all coal types suggests that high-temperature pyrolysis promotes diversity. These findings contribute to refined source apportionment of carbon emissions from residential coal combustion and provide the scientific basis for the formulation of air pollution prevention strategies, crucial for coal-dependent regions.

Synthesis and pyrolysis of polyacrylate-supported flavor precursors

Herein we present a novel ‘polymerization strategy’ aimed at synthesizing flavor precursors, with a focus on enhancing their thermal stability and release properties. Three volatile flavors, menthol, methyl cyclopentenolone, and ethyl maltol, are reacted with acryloyl chloride to produce corresponding vinyl monomers. These monomers undergo radical polymerization to form homopolymers (P1−P3). To improve solubility in alcohol solvents, a hydrophilic oligoethylene glycol monomer is introduced, copolymerized with the flavor containing monomers, resulting in copolymers (P4−P6). An important advantage of these polymers lies in their significantly enhanced thermal stability, exhibiting an increase of approximately 100 to 200 °°C compared to small molecular flavors. Furthermore, our methodology enables efficient release of the target flavors upon heating, as evidenced by online analyses of volatiles from pyrolysis using fixed-bed reactor combined with single photoionization mass spectrometry (FBR-SPIMS) and pyrolysis-gas chromatography-mass spectrometry (Py-GC–MS). This work represents a practical and innovative approach to improving the thermal stability of volatile flavors and elevating their release temperature, offering promising applications in high-temperature food processing and tobacco industries.

Stress-Alteration Enhancement of the Reactivity of Aluminum Nanoparticles in the Catalytic Decomposition of exo-Tetrahydrodicyclopentadiene (JP-10).

High-energy-density aluminum nanoparticles (AlNPs) upon thermal annealing followed by superquenching result in elevated stress levels in the metallic core and reduced surface energy at the core-shell interface. Isomer-selective vacuum ultraviolet-based photoionization mass spectrometry coupled to a high-temperature chemical microreactor reveals that these stress-altered AlNPs (SA-AlNPs) exhibit distinctive temperature-dependent reactivities toward catalytic decomposition of the hydrocarbon jet fuel exo-tetrahydrodicyclopentadiene (JP-10, C10H16) compared to untreated AlNPs (UN-AlNPs). SA-AlNPs show a delayed initiation of the decomposition for JP-10 by 200 K relative to the UN-AlNPs; however, the full decomposition is achieved at a 100 K lower temperature. Furthermore, there are fewer oxygenated products that are generated from the alumina surface-induced heterogeneous oxidation process and a larger fraction of closed- and open-shell hydrocarbons. Chemical insight bridging the reactivity order of SA-AlNPs at low and high temperatures, simultaneously, is obtained via a detailed examination of the product branching ratios obtained in this study.

A comparative pyrolysis study of tetraethoxysilane and tetraethoxymethane: Insight into congener substitution effects on pyrolysis chemistry of siloxane flame synthesis precursors

The pyrolysis of siloxane precursors, such as tetraethoxysilane (TEOS), is commonly employed in the flame synthesis and chemical vapor deposition of silica nanoparticles. In this work, the flow reactor pyrolysis of TEOS is studied using gas chromatography (GC) and synchrotron vacuum ultraviolet photoionization mass spectrometry (SVUV-PIMS), and the congener substitution effects from the central C atom to the central Si atom are investigated through comparison with its hydrocarbon counterpart tetraethoxymethane (TEOM). Pyrolysis models of TEOS and TEOM are constructed and validated against the measured results. Modeling analysis, including rate of production analysis and sensitivity analysis, provides insights into chemistry in fuel consumption and product formation. In contrast, the observations of silicon-containing products in SVUV-PIMS experiments provide evidence for crucial decomposition pathways of TEOS. It is observed that TEOS exhibits significantly higher stability than TEOM under pyrolysis conditions. The most abundant products in the pyrolysis of TEOS and TEOM are ethylene and ethanol, and TEOS produces more hydrocarbon products than TEOM. The lower pyrolysis reactivity of TEOS is attributed to the slower unimolecular decomposition reaction which dominates the decomposition of TEOS than TEOM. This can be explained by the hindrance of the extremely strong Si-O bond resulting from the significantly different electronegativity between Si and O. The higher initial decomposition temperature of TEOS enhances the contribution of other decomposition channels, such as C-C bond dissociation and H-abstraction reactions, in TEOS consumption. This leads to the abundant formation of hydrocarbon productions such as methane, ethane, and acetaldehyde. As the main pyrolysis product, the ethanol produced by TEOM pyrolysis is four times that of TEOS due to the congener substitution effects. The ethanol formation pathway in TEOS pyrolysis is different from that in TEOM pyrolysis, which is mainly formed via a newly proposed multi-step mechanism, resulting in a lower yield in TEOS pyrolysis.

Ni-Based Catalysts for CO2 Methanation: Exploring the Support Role in Structure-Activity Relationships.

The catalytic hydrogenation of CO2 to methane is one of the highly researched areas for the production of chemical fuels. The activity of catalyst is largely affected by support type and metal-support interaction deriving from the special method during catalyst preparation. Hence, we employed a simple solvothermal technique to synthesize Ni-based catalysts with different supports and studied the support role (CeO2, Al2O3, ZrO2, and La2O3) on structure-activity relationships in CO2 methanation. It is found that catalyst morphology can be altered by only changing the support precursors during synthesis, and therefore their catalytic behaviours were significantly affected. The Ni/Al2O3 with a core-shell morphology prepared herein exhibited a higher activity than the catalyst prepared with a common wet impregnation method. To have a comprehensive understanding for structure-activity relationships, advanced characterization (e. g., synchrotron radiation-based XAS and photoionization mass spectrometry) and in-situ diffuse reflectance infrared Fourier transform spectroscopy experiments were conducted. This research opens an avenue to further delve into the role of support on morphologies that can greatly enhance catalytic activity during CO2 methanation.

Efficient Oxidative Decomposition of Jet-Fuel exo-Tetrahydrodicyclopentadiene (JP-10) by Aluminum Nanoparticles in a Catalytic Microreactor: An Online Vacuum Ultraviolet Photoionization Study.

The oxidation of gas-phase exo-tetrahydrodicyclopentadiene (JP-10, C10H16) over aluminum nanoparticles (AlNP) has been explored between a temperature range of 300 and 1250 K with a novel chemical microreactor. The results are compared with those obtained from chemical microreactor studies of helium-seeded JP-10 and of helium-oxygen-seeded JP-10 without AlNP to gauge the effects of molecular oxygen and AlNP, respectively. Vacuum ultraviolet (VUV) photoionization mass spectrometry reveals that oxidative decomposition of JP-10 in the presence of AlNP is lowered by 350 and 200 K with and without AlNP, respectively, in comparison with pyrolysis of the fuel. Overall, 63 nascent gas-phase products are identified through photoionization efficiency (PIE) curves; these can be categorized as oxygenated molecules and their radicals as well as closed-shell hydrocarbons along with hydrocarbon radicals. Quantitative branching ratios of the products reveal diminishing yields of oxidized species and enhanced branching ratios of hydrocarbon species with the increase in temperature. While in the low-temperature regime (300-1000 K), AlNP solely acts as an efficient heat transfer medium, in the higher-temperature regime (1000-1250 K), chemical reactivity is triggered, facilitating the primary decomposition of the parent JP-10 molecule. This enhanced reactivity of AlNP could plausibly be linked to the exposed reactive surface of the aluminum (Al) core generated upon the rupture of the alumina shell material above the melting point of the metal (Al).

Exploration on the combustion chemistry of p-xylene: A comprehensive study over wide conditions and comparison among C8H10 isomers

Pyrolysis and oxidation of p-xylene over wide conditions were studied in this work in order to provide a comprehensive insight into the combustion chemistry of p-xylene. Concerning this goal, the pyrolysis of p-xylene was investigated in a flow reactor at pressures from 0.04 to 1 atm over the temperature range of 1000–1600 K. Key radicals, isomers and PAH products including three xylyl isomers, benzyl, xylylene isomers, styrene, benzene, fulvene, indene, naphthalene and phenanthrene, were identified and quantified using synchrotron vacuum ultraviolet photoionization mass spectrometry. The oxidation of p-xylene was studied in a jet-stirred reactor at 10 atm, 800–1300 K and equivalence ratios of 0.5–2.0 with a residence time of 0.5 s. Oxidation products were quantified by using gas chromatography combined with mass spectrometry and Fourier transform infrared spectrometry. A kinetic model for p-xylene combustion over wide conditions was developed based on our previously proposed p-xylene oxidation model and validated against the new experimental measurements in this work and literature reported experimental data, including flow reactor oxidation, laminar premixed flame, ignition delay time and laminar burning velocity. In the flow reactor pyrolysis, p-xylene mainly undergoes unimolecular decomposition to yield p-xylyl, which mainly suffers the H-loss reaction to form p-xylylene and isomerization reaction to form o-xylyl. The resonantly stabilized fulvenallenyl and benzyl radicals play an important role in the formation of bicyclic and tricyclic PAHs including indene, naphthalene, and phenanthrene. In the JSR oxidation, p-xylene is predominantly consumed via H-abstraction by oxygenated radicals such as OH, O, and HO2 forming p-xylyl, which can be oxidized by HO2 and eventually converted to p-methylbenzaldehyde. As the most abundantly produced oxygenated aromatics, further consumption of p-methylbenzaldehyde results in the formation of other observed oxygenated aromatics such as cresol, benzofuran, and benzaldehyde. The combustion chemistry of three C8H10 isomers, i.e., p-xylene, o-xylene, and ethylbenzene, were also compared in terms of pyrolysis and oxidation fuel reactivity, and PAHs formation and growth, showing remarkable fuel isomeric effects.

Absolute Photoionization Cross Section and Dissociative Ionization Pathways of Alpha-Pinene.

The absolute photoionization cross section of the monoterpenoid, alpha-pinene (AP), is presented together with the relative photoionization cross sections of its dissociative fragments for the first time. Experiments are performed via multiplexed vacuum ultraviolet (VUV) synchrotron photoionization (PI) mass spectrometry in the 8.0-11.0 eV energy range. Experimental work is conducted at the Advanced Light Source of the Lawrence Berkeley National Laboratory. Dissociative fragments were identified at m/z 121, 94, 93, 92, and 80. The photoionization cross section for the parent mass at 11.0 eV was determined to be 17±4 Mb with a total ionization cross section of 92±23 Mb at the same photon energy. Experimental appearance energies of dissociative ionization fragments and potential dissociative ionization pathways calculated at the G4 level of theory are presented as well.

Direct Experimental Observation of the Tetrabromine Cluster Br4 by Synchrotron Photoionization Mass Spectrometry.

We present a first spectroscopic characterization of the homoatomic polyhalogen tetrabromine, Br4 , in the gas phase. Photolysis of CHBr3 at 248 nm is used to generate atomic bromine radicals in a flow tube reactor. Resulting combination products are detected by photoionization mass spectrometry at the Advanced Light Source of the Lawrence Berkeley National Laboratory. Interpretation of the experimental mass spectra is informed by calculated adiabatic ionization energies carried out at the CCSD(T)/aug-cc-pVTZ//M06-2X/aug-cc-pVTZ and CCSD(T)/aug-cc-pVTZ//cam-B3LYP/6-311++g** levels of theory. Tunable VUV synchrotron radiation enables the collection of the mass-selected photoionization spectra by which Br4 is assigned using Franck-Condon simulations of a Br2 dimer with a stretched tetrahedral geometry.

Elucidating the low temperature chemistry of o-xylene enhanced by the reaction pool of dimethyl ether

The branched aromatic hydrocarbon with short side chains, such as o-xylene, has weak low temperature oxidation reactivity, while it could proceed low temperature chain recycling reactions by blending a fuel component with higher oxidation reactivity. However, the study of low temperature oxidation kinetics of o-xylene is very scarce. Therefore, this work investigated the low temperature oxidation process of o-xylene in an atmospheric jet stirred reactor by adding a biofuel with higher low temperature oxidation reactivity, i.e. dimethyl ether (DME). A series of characteristic low temperature intermediates, such as phenyl hydroperoxides and ketohydroperoxide from the oxidation of o-xylene, were detected by using the synchrotron vacuum ultraviolet photoionization mass spectrometry (SVUV-PIMS). The chemical structures of representative low temperature intermediates were determined by comparing the ionization thresholds from measured photoionization efficiency curves with calculated ionization energies. A kinetic model for o-xylene and DME mixture was developed and verified by literature and present experimental data. Rate of production (ROP) and sensitivity analyses were performed, which indicate that the low temperature oxidation chemistry of o-xylene, such as the negative temperature coefficient behavior, is enhanced by the reaction pool of DME. According to the classical low temperature oxidation mechanism of n-alkanes, the low temperature reactions of o-xylene were proposed. In particular, phenyl hydroperoxides and ketohydroperoxides were revealed to be key indicators for the occurrence of first and second O2 addition reactions during the oxidation of o-xylene, respectively. In addition, the sensitivity analysis uncovers the interaction kinetics between the reaction pools of o-xylene and DME, as well as their effects on fuel consumption and products formation. In summary, present evidence elucidates the low temperature chemistry of a representative branched aromatic, which could contribute to the development of future engines and control of combustion pollutants.

Determination of the two-compartment model parameters of exhaled HCN by fast negative photoionization mass spectrometry

Breath exhaled hydrogen cyanide (HCN) has been identified to be associated with several respiratory diseases. Accurately distinguishing the concentration and release rate of different HCN sources is of great value in clinical research. However, there are still significant challenges due to the high adsorption and low concentration characteristics of exhaled HCN. In this study, a two-compartment kinetic model method based on negative photoionization mass spectrometry was developed to simultaneously determine the kinetic parameters including concentrations and release rates in the airways and alveoli. The influences of the sampling line diameter, length, and temperature on the response time of the sampling system were studied and optimized, achieving a response time of 0.2 s. The negative influence of oral cavity-released HCN was reduced by employing a strategy based on anatomical lung volume calculation. The calibration for HCN in the dynamic range of 0.5–100 ppbv and limit of detection (LOD) at 0.3 ppbv were achieved. Subsequently, the experiments of smoking, short-term passive smoking, and intake of bitter almonds were performed to examine the influences of endogenous and exogenous factors on the dynamic parameters of the model method. The results indicate that compared with steady-state concentration measurements, the kinetic parameters obtained using this model method can accurately and significantly reflect the changes in different HCN sources, highlighting its potential for HCN-related disease research.

Low-temperature oxidation of n-butanol in a jet-stirred reactor: Detailed species measurements and modeling studies

n-Butanol is a new generation of liquid biofuel. A detailed understanding of the low-temperature combustion chemistry of n-butanol is instructive for its practical application in advanced low-temperature engines. The high-temperature combustion chemistry of n-butanol has been extensively studied, but its low-temperature combustion chemistry remains underexplored, especially the detailed species distribution. In this work, ozone addition was used to enhance the low-temperature oxidation reaction activity to achieve the oxidation of n-butanol in a jet-stirred reactor (JSR) at atmospheric pressure and in the temperature range of 400–800 K. Synchrotron vacuum ultraviolet photoionization mass spectrometry (SVUV-PIMS) was used for detailed measurements of species distribution. The identification of some intermediate species contributed to elucidating and verifying the low-temperature oxidation reaction pathways of n-butanol, such as butanal, C4 hydroxyalkyl hydroperoxides, C4 hydroxyl cyclic ether, and C4 keto-hydroperoxide. Furthermore, the formation of several elusive intermediates was also identified (e.g., C2H4O2, C3H6O2, C4H6On (n = 1∼3), and C4H8O2), highlighting the necessity of further kinetic studies on the low-temperature oxidation of n-butanol. Based on detailed experimental measurements, the n-butanol model was further developed to improve the model predictions by updating the rate constants for the H-atom abstraction reactions of n-butanol by the ȮH radical, adding the detailed butanal sub-mechanism, etc. Especially, the premature formation of CO2 in the present experiment was satisfactorily explained and predicted by the addition of a generally accepted reaction class (i.e., RȮ2 + RȮ2 = RȮ + RȮ + O2 of butanal). Overall, this updated model satisfactorily predicts both the ignition delay time reported in the literature and the species distribution obtained in this work.

Online quantification of nicotine in e-cigarette aerosols by vacuum ultraviolet photoionization mass spectrometry.

The growing popularity of e-cigarettes and the associated risks of nicotine addiction present a new challenge to global public health security. Measuring the nicotine levels in e-cigarette aerosols is essential to assess the safety of e-cigarettes. In this study, a rapid in situ method was developed for online quantification of nicotine in e-cigarette aerosols by using a homemade vacuum ultraviolet photoionization aerosol mass spectrometer (VUV-AMS). E-cigarette liquids with different nicotine concentrations were prepared to generate aerosols containing different levels of nicotine, which were employed as the calibration sources for nicotine quantification by VUV-AMS. The results showed that the mass concentration of nicotine in e-cigarette aerosols has a good linear relationship with its signal intensity in the mass spectrum, and the limits of detection and quantitation of nicotine by VUV-AMS were found to be 2.0 and 6.2 μg per puff respectively. Then the online method was utilized to measure five commercial e-cigarettes, and their nicotine yields were determined to be between 31 and 188 μg per puff with the nicotine fluxes from 7.7 to 70 μg s-1, agreeing with the results of the gas chromatography with a flame ionization detector (GC-FID). This study demonstrated the feasibility and advantages of VUV-AMS for quick quantification of nicotine in e-cigarette aerosols within seconds.

Time-resolved quantification of key species and mechanistic insights in low-temperature tetrahydrofuran oxidation.

We investigate the kinetics and report the time-resolved concentrations of key chemical species in the oxidation of tetrahydrofuran (THF) at 7500 torr and 450-675 K. Experiments are carried out using high-pressure multiplexed photoionization mass spectrometry (MPIMS) combined with tunable vacuum ultraviolet radiation from the Berkely Lab Advanced Light Source. Intermediates and products are quantified using reference photoionization (PI) cross sections, when available, and constrained by a global carbon balance tracking approach at all experimental temperatures simultaneously for the species without reference cross sections. From carbon balancing, we determine time-resolved concentrations for the ROO˙ and ˙OOQOOH radical intermediates, butanedial, and the combined concentration of ketohydroperoxide (KHP) and unsaturated hydroperoxide (UHP) products stemming from the ˙QOOH + O2 reaction. Furthermore, we quantify a product that we tentatively assign as fumaraldehyde, which arises from UHP decomposition via H2O or ˙OH + H loss. The experimentally derived species concentrations are compared with model predictions using the most recent literature THF oxidation mechanism of Fenard et al., (Combust. Flame, 2018, 191, 252-269). Our results indicate that the literature mechanism significantly overestimates THF consumption and the UHP + KHP concentration at our conditions. The model predictions are sensitive to the rate coefficient for the ROO˙ isomerization to ˙QOOH, which is the gateway for radical chain propagating and branching pathways. Comparisons with our recent results for cyclopentane (Demireva et al., Combust. Flame, 2023, 257, 112506) provide insights into the effect of the ether group on reactivity and highlight the need to determine accurate rate coefficients of ROO˙ isomerization and subsequent reactions.

Revealing the low to moderate temperature oxidation kinetics of 1,2,4-trimethylbenzene sensitized by dimethyl ether

Low to moderate temperature oxidation has been a vital topic in the combustion chemistry due to its critical role in controlling the combustion characteristics such as autoignition and pollutant emissions. Low temperature oxidation kinetics of alkanes and oxygenated biofuels have been widely explored, while that of branched aromatics is poorly understood. This work aims to investigate the low to moderate temperature oxidation kinetics of 1,2,4-trimethylbenzene (TMB, C9H12), which is a multi-branched alkylbenzene with weak low temperature oxidation reactivity. To enhance the low temperature oxidation reactivity of TMB, dimethyl ether (DME) was added to efficiently provide chain initiators. The oxidation experiment of TMB/DME mixture was performed with an atmospheric jet stirred reactor coupled with synchrotron vacuum ultraviolet radiation photoionization mass spectrometry. The negative temperature coefficient (NTC) behavior, as well as featured aromatic intermediates, especially phenyl hydroperoxides and unexpected highly oxygenated molecules (HOMs), were observed in the experiment. The detection of these fingerprint aromatic intermediates provide crucial evidence for revealing the low to moderate oxidation kinetics of TMB. In addition, a kinetic model was developed to provide in-depth kinetic analysis. The results demonstrate that the active chain initiators produced from DME oxidation trigger the low temperature chain-branching reactions of TMB. The chain recycling process is further sustained due to the regeneration of active intermediates such as phenyl hydroperoxides and •OH radicals. Aromatic intermediates with chemical compositions of C9H12Ox and C9H10Ox were measured and identified to be key indicators for the low temperature chemistry of TMB. In particular, the aromatic HOMs (C9H12O6 and C9H10O5) are fingerprint intermediates produced from the third O2 addition and subsequent reactions of TMB. Besides, the sensitivity analysis indicates that the interaction kinetics between TMB and DME by sharing the highly sensitive reactions of hydroperoxides and •OH radicals. The present work extends the conceptual reaction schemes proposed in alkanes towards branched aromatics, especially sequential O2 addition reactions that contributing to the formation of phenyl hydroperoxides and HOMs.

Unveiling radical pathways in the pyrolysis of eugenol: Experimental and computational insights

Understanding the lignin pyrolysis mechanism holds significant importance for enhancing thermochemical conversion processes and advancing the refinement of biofuels. In this paper, a mechanism study was conducted on the pyrolysis of eugenol within the temperature range of 450 to 750 °C, utilizing synchrotron photoionization mass spectrometry coupled with density functional theory. 5-allyl-2-hydroxyphenoxyl radical (m/z 149) and other major radicals were detected experimentally during eugenol pyrolysis for the first time. The cleavage of the O-CH3 bond was confirmed as the main initial unimolecular pyrolysis pathway compared with other hemolysis and isomerization reactions. Radical-assisted bimolecular reactions initiated by CH3 and H atoms, such as ipso substitution and abstraction reactions, were well discussed. Radical-assisted abstractions made the most contribution to the formation of main radicals and products at high temperatures. Furthermore, quinone-type products were determined and their formation pathways were discussed. This research provides insights into eugenol pyrolysis, shedding light on the fundamental mechanisms of thermochemical conversion of lignin.

Experimental and theoretical study of cyclopropanated fuel exo,exo-Tetracyclo[3.3.1.02,4.06,8]nonane pyrolysis in a jet-stirred reactor

Exo,exo-Tetracyclo[3.3.1.02,4.06,8]nonane (exo-TCN), a kind of cyclopropanated fuel with high tension three-membered ring, which has the characteristics of high density, high net heat of combustion and good low-temperature performance, is a potential high-energy-density liquid fuel. To deeply understand its combustion behavior, and lay a foundation for practical application, detailed experimental and theoretical study is necessary. The pyrolysis of exo-TCN was investigated in a jet-stirred reactor at a temperature range of 500–1010 K under atmospheric pressure with a residence time of 2 s. 54 products and intermediates ranging from m/z = 2–204 were identified and quantified by synchrotron vacuum ultraviolet photoionization mass spectrometry and online gas chromatography, the major products were hydrogen, ethylene, benzene, methane, propene, toluene and styrene. The potential energy surfaces of exo-TCN unimolecular decomposition reactions were calculated by quantum chemistry at CBS-QB3 level. It is found that the pyrolysis of exo-TCN experiences three stages. In the first stage, exo-TCN isomerizes into Tricyclo[3.3.1.02,4]non-6-ene (TCN-6) by ring expansion of the three-membered ring. In the second stage, TCN-6 generates two main isomers through ring expansion reactions, and decomposes into pyrolysis products. The third stage is the secondary reaction of the intermediate products. Finally, combined with the experimental results and theoretical calculation, the possible reaction mechanism of exo-TCN pyrolysis was proposed, and the related reaction rate constants were calculated.

Experimental and modeling study of the N, N-dimethylformamide pyrolysis at atmospheric pressure

As a polar solvent, N, N-Dimethylformamide (DMF) is a potential source of volatile organic compounds during industrial processing. The potential energy surface and pressure-dependent rate coefficients of DMF primary and secondary thermal decomposition were theoretically investigated by automatic ab initio calculations. A singlet aminohydroxycarbene route generating CO is found to be the most energetically favored channel among the unimolecular initiation reactions with a tight transition state. A kinetic model was proposed for DMF pyrolysis prediction and validated against the speciation data newly obtained from synchrotron vacuum ultraviolet photoionization mass spectrometry in a flow reactor within 773 K–1048 K and literature data in a jet stirred reactor within 450 K–900 K at atmospheric pressure. Satisfactory agreements were obtained for the major intermediates and products, but the model failed to capture the formation of some oxygenated compounds, possibly due to the missing reaction pathway for bimolecular addition. During pyrolysis, DMF is mainly consumed by the hydrogen abstraction reaction as the relatively high CN bond energy hinders the barrierless homolytic cleavage. Unlike aldehydes where the carbonyl site is favored, H-abstraction from DMF methyl sites is prevalent, although the acylamino group readily undergoes decarbonylation and β-scission forming oxygenated and nitrogenous parts. Consequently, CO and HCN are the major pyrolysis products. Besides, by incorporating essential high temperature kinetics, extended validation was conducted against the available intermediate temperature autoignition delay times (1000–1350 K, 2 bar) and laminar burning velocity data, and the reason for the discrepancy between the model prediction and experiments was inferred according to the sensitivity analyses.

Pyrolysis of Cyclohexane and 1-Hexene at High Temperatures and Pressures—A Photoionization Mass Spectrometry Study

Pyrolysis of Cyclohexane and 1-Hexene at High Temperatures and Pressures—A Photoionization Mass Spectrometry Study

Pyrolysis study of moxa floss with different storage years using online photoionization mass spectrometry

The pyrolysis behaviors of moxa floss with 5–9 storage years were investigated by thermogravimetry (TG) and online synchrotron radiation photoionization mass spectrometry. The online fragment-free mass spectra of moxa floss pyrolysis products were obtained within 300–800 ℃ and characterized as hydrocarbons, nitrogenous and oxygenated compounds. The results indicate that pyrolysis temperature plays a leading role in the low-molecular-weight product distribution, while the storage year has secondary effects. Controlling the pyrolysis temperature in a lower range (<650 ℃) can effectively reduce the generation of benzene, toluene and other harmful substances. Aromatics could be released from the break of large molecules with aromatic structures and formed from the aromatization of small unstructured compounds at high temperatures. At the temperature lower than 400 ℃, short-year samples exhibit a higher intensity of oxygenated compounds. However, with the increase of storage years, nitrogenous heterocyclics such as pyrrole and pyridine are preferably formed at higher temperatures. In addition, increasing the storage year of moxa floss leads the TG curve to exhibit a lower maximum mass loss rate. These results will enrich the understanding of the storage year effect on the beneficial oxygen-containing components generation and the release of harmful components in the moxa floss pyrolysis.