Photoinduced Electron Transfer-reversible Addition-fragmentation Chain Research Articles

Controlled radical polymerization of vinyl ketones using visible light

Herein we report the photoinduced electron transfer–reversible addition–fragmentation chain transfer (PET-RAFT) polymerization of a range of vinyl ketone monomers including methyl, ethyl and phenyl derivatives, using Eosin Y as an organic photoredox catalyst and visible light.

Photoinduced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization using titanium dioxide

Photoinitiated living radical polymerization has attracted wide attention in recent years. Titanium dioxide (TiO2) is a kind of semi-conducting metal oxide which is widely used in water treatment, photovoltaics and organic synthesis. However, there is few application in living radical polymerization. In this study, photoinduced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization of methyl methacrylate (MMA) using TiO2 as photoredox catalyst is successfully carried out. It offers good control over molecular weights and polydispersities (PDI). The end group fidelity of PMMA is successfully demonstrated by chain extension for the preparation of poly(methyl methacrylate)-b-poly(dimethylaminoethyl methacrylate) (PMMA-b-PDMAEMA) copolymer. Moreover, the polymerization can be controlled by switching “ON” and “OFF” the light. Open image in new window

Facile Synthesis of Worm-like Micelles by Visible Light Mediated Dispersion Polymerization Using Photoredox Catalyst.

Presented herein is a protocol for the facile synthesis of worm-like micelles by visible light mediated dispersion polymerization. This approach begins with the synthesis of a hydrophilic poly(oligo(ethylene glycol) methyl ether methacrylate) (POEGMA) homopolymer using reversible addition-fragmentation chain-transfer (RAFT) polymerization. Under mild visible light irradiation (λ = 460 nm, 0.7 mW/cm(2)), this macro-chain transfer agent (macro-CTA) in the presence of a ruthenium based photoredox catalyst, Ru(bpy)3Cl2 can be chain extended with a second monomer to form a well-defined block copolymer in a process known as Photoinduced Electron Transfer RAFT (PET-RAFT). When PET-RAFT is used to chain extend POEGMA with benzyl methacrylate (BzMA) in ethanol (EtOH), polymeric nanoparticles with different morphologies are formed in situ according to a polymerization-induced self-assembly (PISA) mechanism. Self-assembly into nanoparticles presenting POEGMA chains at the corona and poly(benzyl methacrylate) (PBzMA) chains in the core occurs in situ due to the growing insolubility of the PBzMA block in ethanol. Interestingly, the formation of highly pure worm-like micelles can be readily monitored by observing the onset of a highly viscous gel in situ due to nanoparticle entanglements occurring during the polymerization. This process thereby allows for a more reproducible synthesis of worm-like micelles simply by monitoring the solution viscosity during the course of the polymerization. In addition, the light stimulus can be intermittently applied in an ON/OFF manner demonstrating temporal control over the nanoparticle morphology.

Light-Regulated Polymerization under Near-Infrared/Far-Red Irradiation Catalyzed by Bacteriochlorophyll a.

Photoregulated polymerizations are typically conducted using high-energy (UV and blue) light, which may lead to undesired side reactions. Furthermore, as the penetration of visible light is rather limited, the range of applications with such wavelengths is likewise limited. We herein report the first living radical polymerization that can be activated and deactivated by irradiation with near-infrared (NIR) and far-red light. Bacteriochlorophyll a (Bachl a) was employed as a photoredox catalyst for photoinduced electron transfer/reversible addition-fragmentation chain transfer (PET-RAFT) polymerization. Well-defined polymers were thus synthesized within a few hours under NIR (λ=850 nm) and far-red (λ=780 nm) irradiation with excellent control over the molecular weight (M(n)/M(w)<1.25). Taking advantage of the good penetration of NIR light, we showed that the polymerization also proceeded smoothly when a translucent barrier was placed between light source and reaction vessel.

Light‐Regulated Polymerization under Near‐Infrared/Far‐Red Irradiation Catalyzed by Bacteriochlorophyll a

AbstractPhotoregulated polymerizations are typically conducted using high‐energy (UV and blue) light, which may lead to undesired side reactions. Furthermore, as the penetration of visible light is rather limited, the range of applications with such wavelengths is likewise limited. We herein report the first living radical polymerization that can be activated and deactivated by irradiation with near‐infrared (NIR) and far‐red light. Bacteriochlorophyll a (Bachl a) was employed as a photoredox catalyst for photoinduced electron transfer/reversible addition–fragmentation chain transfer (PET‐RAFT) polymerization. Well‐defined polymers were thus synthesized within a few hours under NIR (λ=850 nm) and far‐red (λ=780 nm) irradiation with excellent control over the molecular weight (Mn/Mw&lt;1.25). Taking advantage of the good penetration of NIR light, we showed that the polymerization also proceeded smoothly when a translucent barrier was placed between light source and reaction vessel.

Visible-Light-Regulated Controlled/Living Radical Polymerization in Miniemulsion.

The implementation of photopolymerization processes in aqueous dispersed systems has the potential to afford greener approaches to the preparation of polymeric materials and has motivated researchers to perform photopolymerization in emulsion. However, these previous works have employed UV irradiation to induce photodegradation of a photoinitiator in addition to specialized equipment setups, thus limiting widespread use of these approaches. In this work, we aim to remedy these drawbacks via the implementation of photoredox catalysis in the regulation of a controlled/living radical polymerization under visible light. Utilizing the photoinduced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) process, we report the miniemulsion polymerization of styrene mediated by a household grade blue LED (λmax = 460 nm, 0.73 mW/cm2). The polymerization rate can be easily manipulated by light intensity and catalyst concentration. Finally, temporal control was demonstrated via ON/OFF experiments, which shows that no significant detriment is caused by prolonged interruptions to the light exposure.

Polymerization-Induced Self-Assembly Using Visible Light Mediated Photoinduced Electron Transfer-Reversible Addition-Fragmentation Chain Transfer Polymerization.

The ruthenium-based photoredox catalyst, Ru(bpy)3Cl2, was employed to activate reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization via a photoinduced electron transfer (PET) process under visible light (λ = 460 nm, 0.7 mW/cm2). Poly(oligo(ethylene glycol) methyl ether methacrylate) was chain extended with benzyl methacrylate to afford in situ self-assembled polymeric nanoparticles with various morphologies. The effect of different intrinsic reaction parameters, such as catalyst concentration, total solids content, and cosolvent addition was investigated with respect to the formation of different nanoparticle morphologies, including spherical micelles, worm-like micelles, and vesicles. Importantly, highly pure worm-like micelles were readily isolated due to the in situ formation of highly viscous gels. Finally, "ON/OFF" control over the dispersion polymerization was demonstrated by online Fourier transform near-infrared (FTNIR) spectroscopy, allowing for temporal control over the nanoparticle morphology.

Stereo-, Temporal and Chemical Control through Photoactivation of Living Radical Polymerization: Synthesis of Block and Gradient Copolymers.

Nature has developed efficient polymerization processes, which allow the synthesis of complex macromolecules with a perfect control of tacticity as well as molecular weight, in response to a specific stimulus. In this contribution, we report the synthesis of various stereopolymers by combining a photoactivated living polymerization, named photoinduced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) with Lewis acid mediators. We initially investigated the tolerance of two different photoredox catalysts, i.e., Ir(ppy)3 and Ru(bpy)3, in the presence of a Lewis acid, i.e., Y(OTf)3 and Yb(OTf)3, to mediate the polymerization of N,N-dimethyl acrylamide (DMAA). An excellent control of tacticity as well as molecular weight and dispersity was observed when Ir(ppy)3 and Y(OTf)3 were employed in a methanol/toluene mixture, while no polymerization or poor control was observed with Ru(bpy)3. In comparison to a thermal system, a lower amount of Y(OTf)3 was required to achieve good control over the tacticity. Taking advantage of the temporal control inherent in our system, we were able to design complex macromolecular architectures, such as atactic block-isotactic and isotactic-block-atactic polymers in a one-pot polymerization approach. Furthermore, we discovered that we could modulate the degree of tacticity through a chemical stimulus, by varying [DMSO]0/[Y(OTf)3]0 ratio from 0 to 30 during the polymerization. The stereochemical control afforded by the addition of a low amount of DMSO in conjunction with the inherent temporal control enabled the synthesis of stereogradient polymer consisting of five different stereoblocks in one-pot polymerization.

Exploiting Metalloporphyrins for Selective Living Radical Polymerization Tunable over Visible Wavelengths

The use of metalloporphyrins has been gaining popularity particularly in the area of medicine concerning sensitizers for the treatment of cancer and dermatological diseases through photodynamic therapy (PDT), and advanced materials for engineering molecular antenna for harvesting solar energy. In line with the myriad functions of metalloporphyrins, we investigated their capability for photoinduced living polymerization under visible light irradiation over a broad range of wavelengths. We discovered that zinc porphyrins (i.e., zinc tetraphenylporphine (ZnTPP)) were able to selectively activate photoinduced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization of trithiocarbonate compounds for the polymerization of styrene, (meth)acrylates and (meth)acrylamides under a broad range of wavelengths (from 435 to 655 nm). Interestingly, other thiocarbonylthio compounds (dithiobenzoate, dithiocarbamate and xanthate) were not effectively activated in the presence of ZnTPP. This selectivity was likely attributed to a specific interaction between ZnTPP and trithiocarbonates, suggesting novel recognition at the molecular level. This interaction between the photoredox catalyst and trithiocarbonate group confers specific properties to this polymerization, such as oxygen tolerance, enabling living radical polymerization in the presence of air and also ability to manipulate the polymerization rates (kp(app) from 1.2-2.6 × 10(-2) min(-1)) by varying the visible wavelengths.

Organo-photocatalysts for photoinduced electron transfer-reversible addition–fragmentation chain transfer (PET-RAFT) polymerization

In this work, we demonstrate the use of organophotoredox catalysts under visible light to perform photoinduced electron transfer-reversible addition fragmentation chain transfer (PET-RAFT) for the polymerization of methacrylate monomers.

Photoinduced Electron Transfer–Reversible Addition–Fragmentation Chain Transfer (PET-RAFT) Polymerization of Vinyl Acetate andN-Vinylpyrrolidinone: Kinetic and Oxygen Tolerance Study

Photoinduced electron transfer–reversible addition–fragmentation chain transfer (PET-RAFT) polymerization was employed for the polymerization of unconjugated monomers, including vinyl acetate, vinyl pivalate, N-vinylpyrrolidinone, dimethyl vinylphosphonate, vinyl benzoate, and N-vinylcarbazole, in the presence of low concentration (ppm range) of photoredox catalyst, fac-[Ir(ppy)3], under low energy visible light irradiation. Kinetic studies of vinyl acetate indicated excellent control of molecular weights and molecular weight distributions (Mw/Mn = 1.09–1.2), even with high monomer conversion (>75%), in different catalyst concentrations. High molecular weights of poly(vinyl acetate) (Mn > 100 000 g/mol) and poly(N-vinylpyrrolidinone) (Mn > 40 000 g/mol) with low dispersities (Mw/Mn < 1.25) were obtained in bulk polymerizations. Moreover, the online kinetic study using Fourier transform near-infrared (FTNIR) showed comparable kinetic rates for the polymerizations in the absence and presence of relatively l...

Oxygen Tolerance Study of Photoinduced Electron Transfer–Reversible Addition–Fragmentation Chain Transfer (PET-RAFT) Polymerization Mediated by Ru(bpy)3Cl2

This study reports a highly efficient photoredox catalyst, Ru(bpy)3Cl2, capable of controlling the polymerization of methacrylates, acrylates, and acrylamides in the presence of thiocarbonylthio compounds via a photoinduced electron transfer–reversible addition–fragmentation chain (PET-RAFT) process. This polymerization technique was performed in a closed vessel in the presence or absence of air. Online Fourier transform near-infrared spectroscopy (FTNIR) was employed to monitor the monomer conversions of methyl methacrylate, methyl acrylate, and N,N′-dimethylacrylamide in the presence or absence of air. Interestingly, after an induction period, the polymerization proceeded in the presence of air to yield well-defined polymers (PDI < 1.20). The polymers were characterized by 1H NMR, UV–vis spectroscopy, and gel permeation chromatography. Excellent end-group retention was also demonstrated by NMR, UV–vis, and successive chain extensions of the resulting homopolymers to yield diblock and multiblock copolymers (decablock copolymers).

Combining Enzymatic Monomer Transformation with Photoinduced Electron Transfer - Reversible Addition-Fragmentation Chain Transfer for the Synthesis of Complex Multiblock Copolymers.

A novel and facile method, involving enzymatic monomer synthesis and a photocontrolled polymerization technique, has been successfully employed for the preparation of high-order multiblock copolymers. New acrylate monomers were synthesized via enzymatic transacylation between an activated monomer, i.e., 2,2,2-trifluoroethyl acrylate (TFEA), and various functional alcohols. These synthesized monomers were successfully polymerized without further purification via photoinduced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization under low energy blue LED light (4.8 W) in the presence of an iridium-based photoredox catalyst (fac-[Ir(ppy)3]). In this condition, PET-RAFT allows us to achieve high monomer conversion (∼100%) with excellent integrity of the end group (>80%). Different multiblock (co)polymers, including poly(hexyl acrylate) pentablock homopolymer, poly(methyl acylate-b-ethyl acrylate-b-n-propyl acrylate-b-n-butyl acrylate-b-n-pentyl acrylate) pentablock copolymer, and poly(3-oxobutyl acrylate-b-methyl acrylate-b-3-(trimethylsilyl)prop-2-yn-1-yl acrylate) triblock copolymer containing functional groups were rapidly prepared via sequential addition of monomers without purification steps.