Photoelectrochemical Biosensor Research Articles

A versatile photoelectrochemical biosensor based on in-situ grown 2D COFs film for sensitive detection of Hg2+ and aflatoxin B1

Herein, a highly stable and low-toxic photoelectrochemical (PEC) biosensor was constructed based on two-dimensional covalent organic frameworks (COFs) film composed of tris(4-aminophenyl)amine and 1,4-phthalaldehyde connected through imine bonds (TA-P COFs) was grown in situ on the electrode surface under mild conditions for detecting mercury ion (Hg2+) and aflatoxin B1 (AFB1). Impressively, the TA-P COF film adhered to the electrode surface through in-situ growth not only accelerated the charge transfer between the interfaces, but also improved the stability of the biosensor, further improving the accuracy of detection. Accordingly, when the cyclic amplification process was triggered in the presence Hg2+ to generate a large amount of output DNA, the signal probe with abundant quencher porous carbon hollow spheres s (PCHS) was modified on the electrode surface through the output DNA for the signal “OFF” detection of Hg2+. Meanwhile, due to the specific binding of the target to the aptamer, the released hairpin DNA 2 (H2) signal probe was modified on the electrode surface through base complementary pairing to achieve the signal “ON” detection of AFB1. The suggested multifunction biosensor achieved sensitive detection of Hg2+ in the range of 10 fM–100 nM and AFB1 in the range of 10 fg mL−1–10 ng mL−1, which showed great practical application potential in both environmental and food analysis.

Multifunctional Supramolecular Hydrogel Modulated Heterojunction Interface Carrier Transport Engineering Facilitates Sensitive Photoelectrochemical Immunosensing.

Highly responsive interface of semiconductor nanophotoelectrochemical materials provides a broad development prospect for the identification of low-abundance cancer marker molecules. This work innovatively proposes an efficient blank WO3/SnIn4S8 heterojunction interface formed by self-assembly on the working electrode for interface regulation and photoregulation. Different from the traditional biomolecular layered interface, a hydrogel layer containing manganese dioxide with a wide light absorption range is formed at the interface after an accurate response to external immune recognition. The formation of the hydrogel layer hinders the effective contact between the heterojunction interface and the electrolyte solution, and manganese dioxide in the hydrogel layer forms a strong competition between the light source and the substrate photoelectric material. The process effectively improves the carrier recombination efficiency at the interface, reduces the interface reaction kinetics and photoelectric conversion efficiency, and thus provides strong support for target identification. Taking advantage of the process, the resulting biosensors are being explored for sensitive detection of human epidermal growth factor receptor 2, with a limit of detection as low as 0.037 pg/mL. Also, this study contributes to the advancement of photoelectrochemical biosensing technology and opens up new avenues for the development of sensitive and accurate analytical tools in the field of bioanalysis.

An ultrasensitive photoelectrochemical biosensor based on AgBiS2/CdS photoanode and multiple signal amplification strategy for the detection of dibutyl phthalate plasticizer

Herein, a novel AgBiS2/CdS heterojunction was developed for the construction of sensitive biosensor for dibutyl phthalate (DBP) detection. Compared with the pristine CdS, the AgBiS2/CdS heterojunction exhibited enhanced photocurrent because of the promoted photo-carriers transfer due to the matched energy band arrangement between AgBiS2 and CdS. Based on this AgBiS2/CdS photoanode and a signal amplification strategy integrates DNAzyme-assisted walker reaction and hybridization chain reaction, a sensitive PEC sensing platform was designed for the detection of DBP. A wide detection ranges from 1 fM to 10 nM and a low detection limit of 0.3 fM were achieved. The proposed PEC biosensor with satisfactory sensitivity, selectivity, and stability shows potential application in environmental monitoring.

Organic polymer/inorganic heterostructure coupled with efficient allosteric bicycle strand displacement for photochemical sensing

In this work, a high-performance conjugated microporous polymer (CMP) decorated with BiOBr (Tr(PhXOD)3-CMP/BiOBr) is synthesized to application in construction of ultrasensitive photoelectrochemical (PEC) biosensor for sensing miRNA-122, by firstly coupling with efficient clip toehold-mediated allosteric bicycle strand displacement (ABSD). Notably, the Tr(PhXOD)3-CMP/BiOBr not only owns self-enhanced D-A-D structure that extremely shortens migration distance of photo-generated electron, but also forms Z-type heterostructure for accelerating electron-hole separation, thereby significantly enhancing the photocurrent with 10-fold higher than commonly used methods. Meanwhile, the clip toehold-mediated ABSD based on ternary linkage structure transformation avoids the attrition of invading strand, endowing the conservation of high concentration for undergoing rapid reaction with high-efficiency DNA amplification, which dramatically improves reaction time and superior target conversion. The experimental results indicate that proposed PEC biosensor had a high sensitivity to miRNA-122 with a detection limit of 0.49 fM, which provides a newly organic/inorganic photosensitive nanomaterials and efficient DNA strand displacement in bioanalytical and early clinical disease diagnosis.

Late-model Bi-MOF＆CdS-QDs materials: Excellent properties and performance in PEC sensors for lung cancer markers

Herein, a novel photoelectrochemical (PEC) active material based on Bi-MOF&CdS-QDs (B&C) is prepared for the first time. Concurrently, a novel form of ultrasensitive PEC biosensor is created for the purpose of detecting CYFRA21-1. The improvement of B&C photocurrent activity is due to the “II-type” electron transport mechanism between Bi-MOF and CdS-QDs. PEC platform is built on B&C modified electrode. The CYFRA21-1 antibody (Ab) is further associated with B&C; bovine serum albumin (BSA) blocks the non-specific binding site. Finally, CYFRA21-1 antigen (Ag) was modified by Ag-Ab specific recognition reaction. Photocurrent signals are suppressed because biological macromolecules are intrinsically insulated. This method enables extremely sensitive CYFRA21-1 detection. The linear range of the PEC biosensor used for CYFRA21-1 detection is 0.0001 ∼ 100 ng·mL−1, and the detection limit is as low as 300 fg·mL−1. This is the first reported PEC immunosensor based on Bi-MOF. The findings indicate that this approach offers a viable platform for sensitive detection of CYFRA21-1.

NIR-driven multifunctional PEC biosensor based on aptamer-modified PDA/MnO2 photoelectrode for bacterial detection and inactivation

Sensitive detection and effective inactivation of bacteria are essential in preventing foodborne bacterial infection that poses a significant threat to human health. Herein, a near-infrared (NIR)-driven multifunctional photoelectrochemical (PEC) biosensor was constructed for detection and inactivation of S. aureus. Based on the covalent bonding between amine and carboxyl groups, carboxyl-functionalized SA31 aptamer was immobilized on the PDA/MnO2 photoelectrode. In the presence of S. aureus, SA31 aptamer can specifically capture S. aureus, causing the decrease of photocurrent signal owing to steric hindrance effect. Leveraging photocurrent-off signal, there existed a satisfied linear relationship between the photocurrent variation and the logarithm of S. aureus concentration, achieving a wide linear range from 10 to 107 CFU/mL with a low detection limit of 2.0 CFU/mL. Notably, PDA/MnO2 with peroxidase-like activity facilitated the catalytic oxidation of S. aureus with assistance of hydrogen peroxide (H2O2) to cause the inactivation of S. aureus. Desorption of inactivated S. aureus from the photoelectrode led to a recovery of photocurrent signal, enabling a "signal on" switch. Simultaneously, the excellent photothermal performance of the PDA/MnO2 converted light energy into heat energy under the irradiation of NIR light (808 nm, 1.5 W/cm2), triggering the synergistic antibacterial effect against S. aureus (97.36%). This work provides a novel strategy for fabricating the detection and inactivation of bacteria in practical applications.

Synergistic signal amplification of ultrathin nanowire-like PtCoFeRuMo high-entropy nanozyme and Z-scheme WO3/ZnIn2S4 heterostructure for split-typed photoelectrochemical aptasensing of myoglobin

Enzyme-initiated sensing strategy has wide applications in photoelectrochemical (PEC) analysis for its high specificity and excellent catalytic efficiency. Herein, ultrathin PtCoFeRuMo high-entropy alloy nanowires (PtCoFeRuMo HEANWs) were prepared by a simple solvothermal method, whose peroxidase-like (POD-like) catalytic property was critically investigated by tetramethylbenzidine (TMB) oxidation in the presence of H2O2. Simultaneously, Z-scheme WO3/ZnIn2S4 heterostructures (labeled WO3/ZnIn2S4) were constructed under solvothermal treatment, whose optical properties and photoactivity were rigorously studied by a set of techniques, combined by elaborating the interfacial charge transfer mechanism. On such foundation, a split-typed PEC aptasensor was established with the WO3/ZnIn2S4 substrate, whose detection signals were further magnified through catalytic oxidation of 3-amino-9-ethylcarbazole (AEC) initiated by the PtCoFeRuMo HEANWs. The resultant PEC sensor realized excellent bioanalysis of biomarker myoglobin, showing a broader linear range from 1.0 × 10−2 to 1.0 × 105 pg mL−1 and a lower limit of detection (0.96 fg mL−1, S/N = 3). This split-typed PEC biosensing strategy shows substantial promise in bioanalysis and clinical diagnosis.

Vanadium-doped metal-organic framework@Znln2S4 core-shell heterojunction-attenuated photoelectrochemical immunoassay

Considering that cancer has become the second leading cause of death in humans, it is essential to develop an analytical approach that can sensitively detect tumor markers for early detection. We report an attenuated photoelectrochemical (PEC) immunoassay based on the organic-inorganic heterojunction 10MIL-88B(FeV)/ZnIn2S4 (10M88B(FeV)/ZIS) as a photoactive material for monitoring carcinoembryonic antigen (CEA). The 10M88B(FeV)/ZIS heterojunctions have excellent light-harvesting properties and high electrical conductivity, which are attributed to the advantages of both organic and inorganic semiconductors, namely, remarkable photogenerated carrier separation efficiency and long photogenerated carrier lifetime. Horseradish peroxidase (HRP) in the presence of H2O2 can catalyze 3,3′-diaminofenamide (DAB) producing brown precipitates (oxDAB), which is then loaded onto the 10M88B(FeV)/ZIS heterojunction to reduce the photocurrent and enable the quantitative detection of CEA. Under optimal conditions, the photocurrent values of the PEC biosensor are linearly related to the logarithm of the CEA concentrations, ranging from 0.01 ng mL−1 to 100 ng mL−1 with a detection limit (LOD) of 4.0 pg mL−1. Notably, the accuracy of the PEC biosensor is in agreement with that of the human CEA enzyme-linked immunosorbent assay (ELISA) kit.

Foldable paper-based photoelectrochemical biosensor based on etching reaction of CoOOH nanosheets-coated laser-induced PbS/CdS/graphene for sensitive detection of ampicillin

Timely and rapid detection of antibiotic residues in the environment is conducive to safeguarding human health and promoting an ecological virtuous cycle. A foldable paper-based photoelectrochemical (PEC) sensor was successfully developed for the detection of ampicillin (AMP) based on glutathione/zirconium dioxide hollow nanorods/aptamer (GSH@ZrO2 HS@apt) modified cellulose paper as a reactive zone with laser direct-writing lead sulfide/cadmium sulfide/graphene (PbS/CdS/LIG) as photoelectrode and cobalt hydroxide (CoOOH) as a photoresist material. Initially, AMP was introduced into the paper-based reaction zone as a biogate aptamer, which specifically recognized the target and then left the ZrO2 HS surface, releasing glutathione (GSH) encapsulated inside. Subsequently, the introduction of GSH into the reaction region and etching of CoOOH nanosheets to expose the PbS/CdS/LIG photosensitive material increased photocurrent. Under optimal conditions, the paper-based PEC biosensor showed a linear response to AMP in the range of 5.0 - 2 × 104 pM with a detection limit of 1.36 pM (S/N = 3). In addition, the constructed PEC sensing platform has excellent selectivity, high stability and favorable reproducibility, and can be used to assess AMP residue levels in various real water samples (milk, tap water, river water), indicating its promising application in environmental antibiotic detection.

Light-dependent on/off ratio of organic photoelectrochemical transistor biosensing

Organic electrochemical transistors (OECTs) possessing controllable on/off ratio (Ron/off) has long been pursued but remains challenging. Till now, few solutions to this problem are well established. Innovative light-material interactions have seen a tremendous growth in diverse electronic applications, but its possibility in Ron/off modulation has not been studied. This study addresses the challenge by the technique of organic photoelectrochemical transistor (OPECT), which is represented by metal-organic framework (MOF) derivative Ce-doped ZnIn2S4 (Ce-ZIS) gated poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) channel upon proper light impact. Interestingly, the interplay between light and Ce-ZIS could appropriately alter the device physics, rendering the light-dependent Ron/off for better transduction of biosensing signal within a fixed VG window. Biologically interfacing with a non-linear hybrid chain reaction directed dendritic DNA superstructure, the device has been shown possible for detection of microRNA-25 with good performance.

A photoelectrochemical biosensor based on self-calibration platform of carbon-rich plasmonic probe with near-infrared driving signal amplification

Exploring the photochemical (PEC) method induced by low-energy light source makes great significance to achieve high stability and accurate analysis. A sensing platform driven by near-infrared (NIR) light was designed by making the biochemically encoded carbon rich plasmonic hybrid (CPH) probe, the peptide@C–Mo2C. The inherent plasmonic effect of C–Mo2C CPH can directly absorb NIR light, thus starting effective electronic-hole pairs separation. Moreover, the photothermal effect of C–Mo2C CPH also promoted the reaction yield of photothermal catalyst reaction on sensing interface to assist the PEC signal amplification. In the presence of target trypsin, it cleaves the peptides, resulting in the release of peptide@C–Mo2C probe from interface, which leads to a relative decrease in PEC signal. More importantly, a self-calibration system consisting of two independent PEC test channels attempted to eliminate the influence of background signal and baseline drift. The test channel was used to specify the recognition target, while the blank channel was used as a reference. Therefore, the signal difference between two channels was recorded, so as to obtain results with less error and higher stability. In this NIR driven PEC sensor, the carbon rich probe with direct and efficient NIR light conversion promoted the sensitivity and a self-calibration system guaranteed the stability which provided innovative thoughts for developing ingenious PEC sensor.

Near-infrared light-induced homogeneous photoelectrochemical biosensor based on 3D walking nanomotor-assisted CRISPR/Cas12a for ultrasensitive microRNA-155 detection

The dysregulation of microRNA (miRNA) expression levels is intricately linked to a myriad of human diseases, and the precise and delicate detection thereof holds paramount significance in the realm of clinical diagnosis and therapy. Herein, a near-infrared (NIR) light-mediated homogeneous photoelectrochemical (PEC) biosensor was constructed for miRNA-155 detection based on NaYF4: Yb, Tm@ZnIn2S4 (NYF@ ZIS) coupled with a three-dimensional (3D) walking nanomotor-assisted CRISPR/Cas12a strategy. The upconverted light emitted by the NYF in the visible and UV region upon NIR light excitation could be utilized to excite ZIS to produce a photocurrent response. The presence of target miRNA-155 initiated an amplification reaction within the 3D walking nanomotor, resulting in the production of multiple nucleic acid fragments. These fragments could activate the collateral cleavage capability of CRISPR/Cas12a, leading to the indiscriminate cleavage of single-stranded DNA (ssDNA) on ALP-ssDNA-modified magnetic beads and the subsequent liberation of alkaline phosphatase (ALP). The released ALP facilitated the catalysis of ascorbic acid 2-phosphate to generate ascorbic acid as the electron donor to capture the photogenerated holes on the NYF@ZIS surface, resulting in a positively correlated alteration in the photocurrent response. Under optimal conditions, the NIR light-initiated homogeneous PEC biosensor had the merits of good linear range (0.1 fM to 100 pM), an acceptable limit of detection (65.77 aM) for miRNA-155 detection. Considering the pronounced sensitivity, light stability, and low photodamage, this strategy presents a promising platform for detecting various other miRNA biomarkers in molecular diagnostic practice.

Light-harvesting iridium (III) complex-sensitized NiO photocathode for photoelectrochemical bioanalysis.

Anovel iridium (III) complex bearing boron dipyrromethene (Bodipy) as the light-harvesting antenna has been synthesized and is firstly employed as photosensitizer to assemble adye-sensitized NiO photocathode. The assembled photocathode exhibits significantly improved photoelectrochemical (PEC) performance. Integrating the prepared photocathode with hybridization chain reaction (HCR)--based signal amplification strategy, a cathodic PEC biosensor is proposed for the detection of microRNA-133a (miRNA-133a). In the presence of thetarget, HCR is triggered to form long duplex concatamers on the photocathode, which allows numerous manganese porphyrins (MnPP) to bind in the dsDNA groove. With the help of H2O2, MnPP with peroxidase-like activity catalyzes 4--chloro-1-naphthol (4-CN) to produce benzo--4--chlorohexadienone (4-CD) precipitate on the electrode, leading to a significant decrease of photocurrent signal. The decreased photocurrent correlates linearly with the target concentration from 0.1 fM to 1nM with a detection limit of 66.2 aM (S/N = 3). Theproposed PEC strategy exhibits delightful selectivity, reproducibility and stability.

A novel photoelectrochemical self-screening aptamer biosensor based on CAU-17-derived Bi2WO6/Bi2S3 for rapid detection of quorum sensing signal molecules

Quorum sensing signal molecule is an important biomarker released by some microorganisms, which can regulate the adhesion and aggregation of marine microorganisms on the surface of engineering facilities. Thus, it is significant to exploit a convenient method that can effectively monitor the formation and development of marine biofouling. In this work, an advanced photoelectrochemical (PEC) aptamer biosensing platform was established and firstly applied for the rapid and ultrasensitive determination of N-(3-Oxodecanoyl)-l-homoserine lactone (3-O-C10-HL) released from marine fouling microorganism Ponticoccus sp. PD-2. The visible-light-driven Bi2WO6/Bi2S3 heterojunction derived from metal-organic frameworks (MOFs) CAU-17 and self-screened aptamer were employed as the photoactive materials and bioidentification elements, respectively. Appropriate amount of MoS2 quantum dots (QDs) conjugated with single-stranded DNA were introduced by hybridization to enhance the photocurrent response of the PEC biosensor. The self-screening aptamer can specifically recognize 3-O-C10-HL, accompanied by increasing the steric hindrance and forcing MoS2 QDs to leave the electrode surface, resulting in an obvious reduction of photocurrent and achieving a dual-inhibition signal amplification effect. Under the optimized conditions, the photocurrent response of PEC aptasensor was linear with 3-O-C10-HL concentration from 1 nM to 10 μM, and the detection limit was as low as 0.26 nM. The detection strategy also showed a high reproducibility, superior specificity and good stability. This work not only provides a simple, rapid and ultrasensitive PEC aptamer biosensing strategy for monitoring quorum sensing signal molecules in marine biofouling, but also broadens the application of MOFs-based heterojunctions in PEC sensors.

A signal amplification strategy based on hexametaphosphate-stabilized BiVO4@CdS heterojunction with Mg2+-modulated surface charge for CEA detection

An ultrasensitive sensor with excellent photoelectrochemical (PEC) properties was developed based on the combination of electrostatic interactions between the hexametaphosphate (HMP)-coated BiVO4@CdS novel photoelectric material and the electron donor. Compared with the conventional BiVO4@CdS photoactive material, the HMP-modified BiVO4@CdS not only increases the stability, but also utilizes the electrostatic interactions between the negative charge carried by the phosphate group and the electron donor, which results to a significant increase in the photoelectric conversion ability after Mg2+ incubation. Specifically, carcinoembryonic antigen (CEA)-targeted immunorecognition was combined with MgCO3 antibody labelling inspired by the ability of HMP to complex with Mg2+. The released Mg2+ from the MgCO3 tag could neutralize the negative charge on the surface of BiVO4@CdS-HMP, and the electrostatic repulsion with the electron donor was suppressed, accelerating the electron transfer, and thus improving the electron-hole separation efficiency. A sensitive detection capability was demonstrated with CEA as the model target. Featuring a wide linear detection range with a detection limit as low as 60 fg/mL, this work provides a fresh perspective on the development of high-performance PEC biosensors.

A novel split-type photoelectrochemical biosensor based on liposome-induced in situ formation of Bi2S3@BiOI/Ag2S heterojunction for the sensitive detection of CEA

A novel split-type photoelectrochemical (PEC) biosensor was constructed for the sensitive detection of carcinoembryonic antigen (CEA) based on the Ag+-liposome (ALL) signal amplification strategy and Bi2S3@BiOI heterojunction as the substrate material. The split-type sensing mode effectively avoids the complex fixation of biomolecules on the electrode surface and preserves the activity of biomolecules. The sandwich complex was formed between CEA and aptamer-anchored streptavidin-functionalized magnetic beads (SMB-Apt) and ALL-labeled aptamer (ALL-Apt). After the methanol was added, a large amount of Ag+ was released from the liposome. The released Ag+ was transferred to the Bi2S3@BiOI modified electrode surface for incubation and then soaked in Na2S solution to form a narrow band gap photosensitive material Ag2S on the electrode surface. Bi2S3@BiOI/Ag2S ternary heterojunction in situ was formed due to the band gap matching relationship between Ag2S and the Bi2S3@BiOI heterojunction, which effectively expanded the light absorption range and enhanced the photocurrent signal. Under the optimal experimental conditions, the constructed PEC sensing platform exhibited good analytical performance for CEA with a linear range of 0.005 ∼ 50 ng mL−1 and a detection limit of 1.21 pg mL−1. Additionally, the PEC sensor had good selectivity, reproducibility, and stability, which provided a new research idea for the detection of clinical tumor biomarkers.

A signal-switchable photoelectrochemical biosensor for ultrasensitive detection of long non-coding RNA in cancer cells

Long non-coding RNA (LncRNA) as an emerging tumor biomarker plays a key factor in the early diagnosis of cancer. Herein, an innovative signal-switchable photoelectrochemical (PEC) biosensor based on ZrO2@CuO bimetallic oxides and T7 Exo-assisted signal amplification is reported for the ultrasensitive and selective detection of lncRNA (HOX gene antisense intergenic RNA, HOTAIR) in cancer cells. Firstly, MOFs-derived TiO2 nanodisks as an excellent photoactive material show an anodic background signal. When target lncRNA exists, the abundant auxiliary DNA1 is freed from T7 Exo-assisted cycle signal amplification, and then competitively hybridizes with auxiliary DNA2 on the electrode. Subsequently, bimetallic MOFs-derived ZrO2@CuO octahedra with a high specific surface area and porous structure are introduced into TiO2 nanodisks-modified biosensor, which appears a cathodic photocurrent and achieves a switchable signal. The developed signal-switchable PEC biosensor shows ultrasensitive detection of lncRNA HOTAIR with a detection limit of 0.12 fM, and can eliminate the false interference. Importantly, the established PEC biosensor has good correlation with RT-qPCR analysis (P < 0.05) for the quantification of lncRNA HOTAIR in cancer cells, which has great potential application for biomarker detection in the early diagnosis of cancer.

Bi2WO6/TiO2-based visible light-driven photoelectrochemical enzyme biosensor for glucose measurement.

Nowadays, the frequent occurrence of food adulteration makes glucose detection particularly important in food safety and quality management. The quality and taste of honey are closely related to the glucose content. However, due to the drawbacks of expensive equipment, complex operating procedures, and time-consuming processes, the application scope of traditional glucose detection methods is limited. Hence, this study developed a photoelectric chemical (PEC) sensor, which is composed of a photoactive material of bismuth tungstate (Bi2WO6) with titanium dioxide (TiO2) and glucose oxidase (GOD), for simple and rapid detection of glucose. Notably, the composites' absorption prominently increased in the visible light region, and the photo-generated electron-hole pairs were efficiently separated by virtue of the unique nanostructure system, thus playing a crucial role in facilitating PEC activity. In the presence of dissolved oxygen, the photocurrent intensity was enhanced by H2O2 generated from glucose under electro-oxidation specifically catalyzed by GOD fixed on the modified electrode. When the working potential was 0.3V, the changes of photocurrent response indicated that the PEC enzyme biosensor providesalow detection limit (3.8µM), and a wide linear range (0.008-8mM). This method has better selectivity in honey samples and broad application prospects in clinical diagnosis for future.

Design of a Novel Green Algae‐Based Biological Photovoltaic Cell with High Photocurrent and a Photoelectrochemical Biosensing Approach Utilizing the BPV for Pesticide Analysis in Water

AbstractIn this research, a green alga (Paulschulziapseudovolvox sp.) based biological photovoltaic cell (BPV) was designed. This clean energy‐friendly BPV produced photocurrent as a result of illuminating the photoanode and cathode electrodes immersed in the aqueous medium with solar energy. For this purpose, both electrodes were first coated with conductive polymers with aniline functional groups on gold electrodes. In the cell, the photoanode was first coated with a gold‐modified poly 4‐(2,5‐di(thiophen‐2‐yl)‐1H‐pyrrol‐1‐yl)benzamine polymer, (P(SNS‐NH2)). Cytochrome C (Cyt. C) material was used to provide crosslink formation with bis‐aniline covalent bonds with the conductive polymer using electrochemical techniques. Paulschulziapseudovolvox sp., one of the green algae that can convert light energy into chemical energy, is attached to this layered electrode surface. The cathode of the cell is attached to the gold electrode surface with poly 4‐(4HDithieno[3,2‐b : 2′,3′‐d]pyrrole‐4‐yl)aniline (P(DTP‐Aryl‐Amine)). Then, the bilirubin oxidase enzyme was immobilized on this film surface with glutaraldehyde activation. This cell, which can use light thanks to green algae, oxidizes and splits water, and oxygen is obtained at the photoanode electrode. At the cathode electrode, the oxygen gas is reduced to water by the bio‐electro‐catalytic method. To obtain high photocurrent from the BPV, necessary electrochemical and chemical optimizations were made during the design of the system to increase the amount of electrons that were transferred and fasten its transfer rate. While the photocurrent value generated by the designed BPV in optimum conditions and in the pseudo‐steady state is 10 mA/m2, the maximum power value obtained is 46.5 mW/m2. In addition to the production of the green algae‐based BPV generating highly efficient electricity which is the main of target of this study, some studies have also been carried out to show whether this system can be used as a pesticide biosensor. Atrazine and diuron biosensing via the BPV system was analytically characterized and recovery and interference studies related to pesticide biosensor property of the BPV were also investigated.

Detection of biological loads in sewage using the automated robot-driven photoelectrochemical biosensing platform.

Real-time polymerase chain reaction (RT-PCR) remains the most prevalent molecular detection technology for sewage analysis but is plagued with numerous disadvantages, such as time consumption, high manpower requirements, and susceptibility to false negatives. In this study, an automated robot-driven photoelectrochemical (PEC) biosensing platform is constructed, that utilizes the CRISPR/Cas12a system to achieve fast, ultrasensitive, high specificity detection of biological loads in sewage. The Shennong-1 robot integrates several functional modules, involving sewage sampling and pretreatment to streamline the sewage monitoring. A screen-printed electrode is employed with a vertical graphene-based working electrode and enhanced with surface-deposited Au nanoparticles (NPs). CdTe/ZnS quantum dots (QDs) are further fabricated through the double-stranded DNA (dsDNA) anchored on Au NPs. Using the cDNA template of Omicron BA.5 spike gene as a model, the PEC biosensor demonstrates excellent analytical performance, with a lower detection limit of 2.93×102 zm and an outstanding selectivity at the level of single-base mutation recognition. Furthermore, the rapid, accurate detection of BA.5 in sewage demonstrates the feasibility of the PEC platform for sewage monitoring. In conclusion, this platform allows early detection and tracking of infectious disease outbreaks, providing timely data support for public health institutions to take appropriate prevention and control measures.