Photoelastic Hybrid Research Articles

Calculation of Stress Intensity Factor under Mixed Mode Biaxial Tensile Load by Photoelastic Hybrid Method

In this study, the photoelastic experiment hybrid method was introduced and applied to the fracture problems of the isotropic polycarbonate plate with a central crack under the uniaxial and equibiaxial tensile load. The influences of equibiaxial tensile load on the isochromatic fringes and stress fields, stress intensity factors near the mixed mode crack-tip were investigated. As the results, without relation to the inclined angle of crack, the asymmetric isochromatic fringes around the crack propagation line under uniaxial tensile load has become symmetric and the slope of isochromatic fringe loop has inclined toward crack surface when an equal lateral tensile load was added. Furthermore, the distribution of all stress components have changed from asymmetric shape to symmetric shape, and only the range of compressive stress of σχ/σ0 have changed as compared with the mode I condition under unaxial load with β = 0°. When an equal lateral tensile load was added to uniaxial load, the value of stress intensity factors are little changed when β = 0° but the values of KI /K0 are increased and KII /K0 are become zero, that is, mode I situation when β = 15°~45°.

A study on the development of photoelastic experimental hybrid method for colour isochromatics (I)

Using the photoelastic experimental hybrid method, we can obtain stress intensity factors and separate the stress components near the crack tip of any material under various loading conditions from only isochromatics. However, monochromatic light has, until now been used in the photoelastic experimental hybrid method to produce black and white isochromatics. The existing photoelastic experimental hybrid method using black and white isochromatics requires high order fringes to obtain sufficient experimental data for photoelastic hybrid techniques. If a photoelastic experimental hybrid method for colour isochromatics is developed, isochromatics with a maximum fringe order of 2 will be adequate for gathering the necessary experimental data for stress analyses using photoelastic hybrid techniques. Therefore, in this work, photoelastic experimental hybrid method for colour isochromatics of a crack problem was developed, and its superiority demonstrated by comparing its results with the results from black and white isochromatics. The use of few fringe orders in photoelastic experimental hybrid method for colour isochromatics is an important feature of this method. Because of this feature, this method, specifically the reflection type photoelastic method where low fringe orders are produced compared to the transmission type photoelastic method, can be widely used in stress analysis of real components.

두 상이한 등방성 이종재료 정지계면균열의 선단 응력장과 변위장에 관한 연구

In many part of machines or structures that made of bimaterial bonded with two dissimilar materials, most failures occur at their interface. Therefore, the accurate analysis of fracture characteristics and the evaluation of mechanical strength for interfacial crack are essential when we design those structures. In this research, stress and displacement components in the vicinity of stationary interfacial crack tip in the two dissimilar isotropic bimaterials are established. Hereafter, the stress components established in this research can be applied to the photoelastic hybrid method which can be used to analyze the fracture behavior of the two dissimilar isotropic bimaterials.br/

OS01W0387 A study on the crack propagation criterion by the static photoelastic experimental hybrid method

The specimen materials used in this research are isotropic material, orthotropic material and bimaterials. The static photoelastic experiment was applied to them. And then the specimens used in photoelastic experiment were fractured under static load. The static photoelastic experimental hybrid method was introduced and it's validity have been assured. The static photoelastic experimental hybrid method was applied to the minimum strain energy density criterion (MSEDC) and the maximum tangential stress criterion (MTSC). And then, crack propagation criterion by the static photoelastic hybrid method was introduced. The theoretical initial angles of crack propagation were calculated using the crack propagation criterion introduced in this research. The experimental initial angles of crack propagation were measured from the fractured specimen. Comparing the experimental initial angles with the theoretical initial angles of crack propagation, the validity of the crack propagation criterion by the static photoelastic experimental hybrid method was assured.

Development of the Dynamic Photoelastic Hybrid Method for Propagating Interfacial Crack of Isotropic/Orthotropic Bi-materials

When the interfacial crack of isotropic/orthotropic bi-materials is propagated with constant velocity along the interface, stress and displacement components are derived in this research. The dynamic photoelastic experimental hybrid method for the bimaterial is introduced. It is assured that stress components and dynamic photoelastic hybrid developed in this research are valid. Separating method of stress components is introduced from only dynamic photoelastic fringe patterns. Crack propagating velocity of interfacial crack is 69∼71% of Rayleigh wave velocity of epoxy resin. The near-field stress components of bonded interface of bimaterial are similar with those of pure isotopic material and two dissimilar isotropic bimaterials under static or dynamic loading, but very near-field stress components of bonded interface of bimaterial are different from those.

A Study on the Development of the Dynamic Photoelastic Hybrid Method for Two Dissimilar Isotropic Bi-Materials

When the interfacial crack of two dissimilar isotropic bi-materials is propagated with constant velocity along the interface, stress and displacement components are derived in this research. The dynamic photoelastic experimental hybrid method for bimaterial is introduced. It is assured that stress components and dynamic photoelastic hybrid method developed in this research are valid. Separating method of stress component is introduced from only dynamic photoelastic fringe patterns. Crack propagating velocity of interfacial crack is 80∼85% (in case of aluminum, 24.3∼25.9%) of Rayleigh wave velocity of epoxy resin. The near-field stress components of crack-tip are similar with those of pure isotropic material under static or dynamic loading, but very near-field stress components of crack-tip are different from those.

A Study on the Development of the Dynamic Photoelastic Hybrid Method for Isotropic Material

In this paper, dynamic photoelastic hybrid method is developed and its validity is certified. The dynamic photoelastic hybrid method can be used on the obtaining of dynamic stress intensity factors and dynamic stress components. The effect of crack length on the dynamic stress intensity factors is less than those on the static stress intensity factors. When structures are under the dynamic mixed mode load, dynamic stress intensity factor of mode I is almost produced. Dynamic loading device manufactured in this research can be used on the research of dynamic behavior when mechanical resonance is produced and when crack is propagated with the constant velocity