Photocatalytic Oxidation Reaction Research Articles

Solar-Driven Sustainability: III-V Semiconductor for Green Energy Production Technologies.

Long-term societal prosperity depends on addressing the world's energy and environmental problems, and photocatalysis has emerged as a viable remedy. Improving the efficiency of photocatalytic processes is fundamentally achieved by optimizing the effective utilization of solar energy and enhancing the efficient separation of photogenerated charges. It has been demonstrated that the fabrication of III-V semiconductor-based photocatalysts is effective in increasing solar light absorption, long-term stability, large-scale production and promoting charge transfer. This focused review explores on the current developments in III-V semiconductor materials for solar-powered photocatalytic systems. The review explores on various subjects, including the advancement of III-V semiconductors, photocatalytic mechanisms, and their uses in H2 conversion, CO2 reduction, environmental remediation, and photocatalytic oxidation and reduction reactions. In order to design heterostructures, the review delves into basic concepts including solar light absorption and effective charge separation. It also highlights significant advancements in green energy systems for water splitting, emphasizing the significance of establishing eco-friendly systems for CO2 reduction and hydrogen production. The main purpose is to produce hydrogen through sustainable and ecologically friendly energy conversion. The review intends to foster the development of greener and more sustainable energy source by encouraging researchers and developers to focus on practical applications and advancements in solar-powered photocatalysis.

Tandem Proton Transfer in Carboxylated Supramolecular Polymer for Highly Efficient Overall Photosynthesis of Hydrogen Peroxide

Proton supply is as critical as O2 activation for artificial photosynthesis of H2O2 via two‐electron oxygen reduction reaction (2e‐ ORR). However, proton release via water dissociation is frequently hindered because of the sluggish water oxidation reaction (WOR), extremely limiting the efficiency of photocatalytic H2O2 production. To tackle this challenge, carboxyl‐enriched supramolecular polymer (perylene tetracarboxylic acid ‐ PTCA) is elaborately prepared by molecular self‐assembly for overall photosynthesis of H2O2. Interestingly, the interconversion between carboxyl as Brønsted acid and its conjugated base realizes rapid proton circulation. Through this efficient tandem proton transfer process, the spatial effect of photocatalytic reduction and oxidation reaction is greatly enhanced with reduced reaction barrier. This significantly facilitates 2e‐ photocatalytic ORR to synthesize H2O2 and in the meanwhile promotes 4e‐ photocatalytic WOR to evolve O2. Consequently, the as‐developed PTCA exhibits a remarkable H2O2 yield of 185.6 μM h‐1 in pure water and air atmosphere under visible light illumination. More impressively, an appreciable H2O2 yield of 78.6 μM h‐1 can be well maintained in an anaerobic system owing to in‐situ O2 generation by 4e‐ photocatalytic WOR. Our study presents a novel concept for artificial photosynthesis of H2O2 via constructing efficient proton transfer pathway to enable rapid proton circulation.

Tandem Proton Transfer in Carboxylated Supramolecular Polymer for Highly Efficient Overall Photosynthesis of Hydrogen Peroxide.

Proton supply is as critical as O2 activation for artificial photosynthesis of H2O2via two-electron oxygen reduction reaction (2e- ORR). However, proton release via water dissociation is frequently hindered because of the sluggish water oxidation reaction (WOR), extremely limiting the efficiency of photocatalytic H2O2 production. To tackle this challenge, carboxyl-enriched supramolecular polymer (perylene tetracarboxylic acid - PTCA) is elaborately prepared by molecular self-assembly for overall photosynthesis of H2O2. Interestingly, the interconversion between carboxyl as Brønsted acid and its conjugated base realizes rapid proton circulation. Through this efficient tandem proton transfer process, the spatial effect of photocatalytic reduction and oxidation reaction is greatly enhanced with reduced reaction barrier. This significantly facilitates 2e- photocatalytic ORR to synthesize H2O2 and in the meanwhile promotes 4e- photocatalytic WOR to evolve O2. Consequently, the as-developed PTCA exhibits a remarkable H2O2 yield of 185.6 μM h-1 in pure water and air atmosphere under visible light illumination. More impressively, an appreciable H2O2 yield of 78.6 μM h-1 can be well maintained in an anaerobic system owing to in-situ O2 generation by 4e- photocatalytic WOR. Our study presents a novel concept for artificial photosynthesis of H2O2 via constructing efficient proton transfer pathway to enable rapid proton circulation.

Tunable multicolor supramolecular assemblies based on phosphorescence cascade energy transfer for photocatalytic organic conversion and anti-counterfeiting

Making full use of the captured energy by phosphorescence light-harvesting systems (PLHSs) and the tunable photoluminescence in energy transfer process to realize the multiple applications is still the challenge of PLHSs research. In this study, we have successfully constructed a highly effective PLHS with tunable multicolor luminescence and efficient conversion of photosensitizer types, which can further be used in photocatalytic organic conversion, information anti-counterfeiting and storage. The supramolecular polymer of BDBP-CB[8], which is generated by cucurbit[8]uril (CB[8]) and 4-(4-bromophenyl)-pyridine derivative (BDBP), realizes a phosphorescence emission and a change in luminescence color. Notably, white light emission was achieved and the logic gate systems was constructed utilizing the application of adjustable luminescence color. More interestingly, PLHS can be constructed by employing BDBP-CB[8] as energy donors, Sulforhodamine 101 (SR101) and Cyanine5 (Cy5) as energy acceptors, which results in a remarkably tunable multicolor photoluminescence to achieve the information storage. Furthermore, we have also found that BDBP-CB[8] can serve as type II photosensitizer for the effective production of singlet oxygen (1O2) during the photooxidation process of styrene in aqueous environments, attaining a remarkable output rate reaching as high as 89 %. Particularly, compared with 1O2 produced by type II photosensitizer BDBP-CB[8], the construction of PLHS can effectively convert type II photosensitizer to type I photosensitizer and efficiently generate superoxide anion radical (O2•−), which can be used for photocatalytic cross-dehydrogenative coupling (CDC) reaction in the aqueous solution with a yield of 90 %. Thus, we have created a PLHS that not only achieves tunable multicolor emission for information anti-counterfeiting and storage, but also realizes the conversion of reactive oxygen species (ROS) for different types photocatalytic oxidation reactions.

Efficient C(sp3)-H bond oxidation on perovskite quantum dots based on Ce-oxygen affinity.

Perovskite quantum dots (QDs) have shown attractive prospects in the field of visible photocatalysis, especially in the synthesis of high value-added chemicals. However, under aerobic conditions, the stable operation of QD catalysts has been limited by the reactive oxygen species (ROS) generated by photoexcitation, especially superoxide species. Here, we propose a strategy of Ce3+ doping in perovskite QDs to guide superoxide species for photocatalytic oxidation reactions. In C(sp3)-H bond oxidation of hydrocarbons, superoxide species were rapidly generated and efficiently utilized on the surface of perovskite QDs, which achieves the stable operation of the catalytic system and obtains a high product conversion rate (15.3 mmol/g/h for benzaldehydes). The mechanism studies show that the strong Ce-oxygen affinity accelerates the relaxation process of photoinduced exciton transfer to superoxide species and inhibits the radiative recombination pathway. This work provides a new idea of utilizing oxygen species on perovskite surface and broadens the design strategy of high-performance QD photocatalysts.

Efficient C(sp3)‐H bond oxidation on perovskite quantum dots based on Ce‐oxygen affinity

Perovskite quantum dots (QDs) have shown attractive prospects in the field of visible photocatalysis, especially in the synthesis of high value‐added chemicals. However, under aerobic conditions, the stable operation of QD catalysts has been limited by the reactive oxygen species (ROS) generated by photoexcitation, especially superoxide species. Here, we propose a strategy of Ce3+ doping in perovskite QDs to guide superoxide species for photocatalytic oxidation reactions. In C(sp3)‐H bond oxidation of hydrocarbons, superoxide species were rapidly generated and efficiently utilized on the surface of perovskite QDs, which achieves the stable operation of the catalytic system and obtains a high product conversion rate (15.3 mmol/g/h for benzaldehydes). The mechanism studies show that the strong Ce‐oxygen affinity accelerates the relaxation process of photoinduced exciton transfer to superoxide species and inhibits the radiative recombination pathway. This work provides a new idea of utilizing oxygen species on perovskite surface and broadens the design strategy of high‐performance QD photocatalysts.

Photocatalytic water oxidation by iron and copper phthalocyanine complexes immobilized on Fe3O4@SiO2@TiO2 under visible light irradiation

In this research, the heterogeneous catalysts of Fe3O4@SiO@TiO‐FePc and Fe3O4@SiO@TiO‐ CuPcN (FePc = iron (II) phthalocyanine and CuPcN = copper (II) tetraazaphthalocyanine), termed respectively as nanocomposites 1 and 2, were prepared by immobilizing the FePc and CuPcN complexes on the Fe3O4@SiO@TiO surface and used for the photocatalytic water oxidation reaction. Since phthalocyanine complexes have received very little attention as photocatalysts for water oxidation, the advantage of the synthesized photocatalyst owes to the ability of the phthalocyanine complex grafted on the titanium substrate to oxidize water in the photocatalytic reaction. The prepared nanocomposites were then studied by diffraction (XRD), scanning electron microscopy (SEM), energy‐dispersive X‐ray (EDX), Fourier transform infrared (FT‐IR) spectroscopies, thermal gravimetric analysis (TGA), transmission electron microscopy (TEM), inductively coupled plasma‐optical emission spectroscopy (ICP‐OES), Brunauer–Emmett–Teller (BET) analysis, ultraviolet diffuse reflectance (DRS), and photoluminescence (PL) spectroscopies. The photocatalytic response of water oxidation by nanocomposites 1 and 2 was investigated in the presence of silver nitrate as an electron recipient at ambient temperature. The progress of the water oxidation reaction was monitored with an oxygen meter. The amount of oxygen generated in the presence of nanocomposites 1 and 2 under visible light irradiation was found to be 2.6 and 2.1 mg L−1, respectively. Owing to the existence of magnetic material, these nanocomposites can be effortlessly removed from the response medium with an external magnet. The involved nanocomposites can be used up to three times in catalytic water oxidation reactions with no significant change in their photocatalytic activity.

The role of Au and Pd in photocatalytic activation of molecular oxygen: A mechanistic study

Activation of molecular oxygen plays an important role in photocatalytic selective oxidation reactions and complete degradation of organic pollutants. Noble metal cocatalysts are often employed to modulate the activation of oxygen to reach an optimum photocatalytic performance. However, the role of the metal nanoparticles (NPs) still remains unclear and deserves investigation for the design of efficient photocatalysts. Here, Au and Pd NPs are deposited on the TiO2 photocatalyst to study the promotional mechanism of O2 dissociation with the presence of glycerol under irradiation by near-ambient-pressure photoelectron spectroscopy and in-situ spectrometry approaches. While both Au and Pd NPs can dissociate O2 into activated oxygen species, a relatively strong bonds of dissociated oxygen atom is observed on Au NPs than on the Pd NPs. This results in a moderate reduction rate of O2 and eventually favors a mild oxidation reaction process for Au, and a rapid reduction rate of O2 and eventually a deep oxidation reaction process for Pd, respectively.

Regulating the Topology of Covalent Organic Frameworks for Boosting Overall H2O2 Photogeneration.

Photocatalytic oxygen reduction reactions and water oxidation reactions are extremely promising green approaches for massive H2O2 production. Nonetheless, constructing effective photocatalysts for H2O2 generation is critical and still challenging. Since the network topology has significant impacts on the electronic properties of two dimensional (2D) polymers, herein, for the first time, we regulated the H2O2 photosynthetic activity of 2D covalent organic frameworks (COFs) by topology. Through designing the linking sites of the monomers, we synthesized a pair of novel COFs with similar chemical components on the backbones but distinct topologies. Without sacrificial agents, TBD-COF with cpt topology exhibited superior H2O2 photoproduction performance (6085 and 5448 μmol g-1 h-1 in O2 and air) than TBC-COF with hcb topology through the O2-O2⋅--H2O2, O2-O2⋅--O2 1-H2O2, and H2O-H2O2 three paths. Further experimental and theoretical investigations confirmed that during the H2O2 photosynthetic process, the charge carrier separation efficiency, O2⋅- generation and conversion, and the energy barrier of the rate determination steps in the three channels, related to the formation of *OOH, *O2 1, and *OH, can be well tuned by the topology of COFs. The current study enlightens the fabrication of high-performance photocatalysts for H2O2 production by topological structure modulation.

Manufacturing porous BaTaO2N nanosheet via nitridation of a novel oxyhalide precursor for boosted photocatalytic water oxidation reaction

BaTaO2N (BTON) with a generous adsorption edge of ca. 660 nm and high theoretical solar-to-hydrogen conversion efficiency of ca. 20.6% has been extensively investigated for photocatalytic water splitting. In this study, we have successfully prepared a porous BTON nanosheet via employing Ba2Bi3Ta2O11Cl (BBTOC) oxyhalide as a novel nitridation precursor. The oxygen evolution rate of the BTON nanosheet is 108 μmol·h−1, which is three times higher than that of BTON (25.9 μmol·h−1) prepared by conventional solid-state method. The successful construction of porous BTON nanosheet is due to the structural transformation of BBTOC nanosheet precursor and facile evaporation of Bi and Cl elements. The porous nanosheet morphology of BTON can not only promote the transfer of photogenerated charge carriers but also provide abundant reaction sites for the oxygen evolution reaction. This work demonstrates a novel and efficient strategy for preparing oxynitride for efficient solar energy conversion.

Synthesis of Zn0.2Cd0.8S/MoS2/rGO photocatalyst for efficient solar-driven selective organic conversion

ZnxCd(1-x)S solid solution was constructed by introducing zinc ions in the process of hydrothermal synthesis of CdS. To further improve the catalyst activity, Zn0.2Cd0.8S was combined with graphene and MoS2, and then the Zn0.2Cd0.8S/MoS2/rGO ternary composites were obtained. Its photocatalytic reactivity was evaluated by the catalytic oxidative coupling of benzylamine and the photocatalytic semi-dehydrogenation of 1,2,3,4-tetrahydroisoquinoline (THIQ). When Zn0.2Cd0.8S/MoS2/rGO was used in photocatalytic benzylamine oxidative coupling reaction, the conversion reached 95 % after 7 h and the selectivity of N-benzyl-1-phenylmethylimide (BPMI) was 99 %. It was further applied to the photocatalytic semi-dehydrogenation of THIQ, the conversion reached 96 % after 7 h reaction in O2 atmosphere, and the selectivity of 3,4-dihydroisoquinoline (DHIQ) reached 99 %. The heterojunction between Zn0.2Cd0.8S and MoS2 can effectively reduce the recombination efficiency of carrier. The introduction of graphene can increase the active site and promote the transfer of photogenerated electrons. The synergistic effect of MoS2 and graphene makes Zn0.2Cd0.8S have outstanding photocatalytic performance. Cycling experiments show that the ternary composite photocatalyst of Zn0.2Cd0.8S/MoS2/rGO have high stability and recyclability. The possible reaction mechanism of photocatalytic oxidative coupling of benzylamine and semi-dehydrogenation of THIQ was proposed by theoretical calculations and the active species capturing experiments.

The insertion of thiazolo[5,4-d]thiazole unit in covalent triazine framework for boosting the photocatalytic capacities in both selective aerobic oxidation of sulfides and amines

Recently, covalent triazine frameworks (CTFs) have realized versatile applications in the field of photocatalysis. Herein, two CTFs photocatalysts were designed and synthesized with or without thiazolo[5,4-d]thiazole (TzTz), an electron deficient unit, to highlight the introduction of an additional acceptor unit on the photocatalytic aerobic oxidation reaction of triazine based CTFs. Specifically, CTF-TZDA was prepared by a condensation reaction between terephthalimidamide and 4,4′-(thiazolo[5,4-d]thiazole-2,5-diyl) dibenzaldehyde (TzTz aldehyde), and similarly, CTF-FPBA was prepared between terephthalimidamide and [1,1′-biphenyl]-4,4′-dicarbaldehyde. CTF-TZDA showed high photocatalytic activities towards aerobic oxidation of both benzyl sulfides and benzyl amines to benzyl sulfoxides and benzyl imines, respectively, and the reaction was powered by blue light. A wide range of substrates can be aerobically oxidized with high yield (about 99%) and high selectivity over CTF-TZDA photocatalyst. The insertion of the TzTz unit lowered that band gap, accelerated the delocalization of π electrons, and elevated the LUMO levels of CTF-TZDA, which are beneficial to extend the light absorption range, and to promote the separation and transfer of photo-induced charge carriers. This work indicates that the insertion of an additional electron deficient unit rich in heteroatoms is considered as a feasible approach towards enhancing the photocatalytic activity of CTFs.

Dithiocarbonate-Protected Au25 Nanorods of a Chiral D5 Configuration and NIR-II Phosphorescence.

Innovative surface-protecting ligands are in constant demand due to their crucial role in shaping the configuration, property, and application of gold nanoclusters. Here, the unprecedented O-ethyl dithiocarbonate (DTX)-stabilized atomically precise gold nanoclusters, [Au25(PPh3)10(DTX)5Cl2]2+ (Au25DTX-Cl) and [Au25(PPh3)10(DTX)5Br2]2+ (Au25DTX-Br), were synthesized and structurally characterized. The introduction of bidentate DTX ligands not only endowed the gold nanocluster with unique staggered Au25 nanorod configurations but also generated the symmetry breaking from the D5d geometry of the Au25 kernels to the chiral D5 configuration of the Au25 molecules. The chirality of Au25 nanorods was notably revealed through single-crystal X-ray diffraction, and chiral separation was induced by employing chiral DTX ligands. The staggered configurations of Au25 nanorods, as opposed to eclipsed ones, were responsible for the large red shift in the emission wavelengths, giving rise to a promising near-infrared II (NIR-II, >1000 nm) phosphorescence. Furthermore, their performances in photocatalytic sulfide oxidation and electrocatalytic hydrogen evolution reactions have been examined, and it has been demonstrated that the outstanding catalytic activity of gold nanoclusters is highly related to their stability.

Selective oxidation of β-keto ester modulated by the d-band centers in D-A conjugated microporous metallaphotoredox catalysts containing M−salen (M[dbnd]Zn, Cu and Co) and triazine monomers

Photocatalytic selective oxidation plays an important role in developing green chemistry. However, it is challenging to design an efficient photocatalyst for controlling the selectivity of photocatalytic oxidation reaction and exploring its detailed mechanism. Here, we synthesized three conjugated microporous polymers (CMPs) with D-A structures, named M−SATE−CMPs (MZn, Cu and Co), with different d-band centers based on different metal centers, resulting in the discrepancy in adsorption and activation capacities for the reactants, which produces the selectivity of β-keto esters being catalyzed into α-hydroperoxide β-keto esters (ROOH) or to α-hydroxyl β-keto esters (ROH). Density functional theory (DFT) calculations also demonstrate that the adsorption and activation capacities of the metal active centers in M−SATE−CMPs (MZn, Cu and Co) for ROOH are the key factors to influence the photocatalytic selective oxidation of β-keto ester. This study provides a promising strategy for designing a metallaphotoredox catalyst whose photocatalytic selectivity depends on the d-band center of metal site in the catalyst.

Comparing the Photocatalytic Oxidation Efficiencies of Elemental Mercury Using Metal-Oxide-Modified Titanium Dioxide under the Irradiation of Ultra-Violet Light

Since the signing of the Minamata Convention in 2013, attempts have been primarily focused on reducing the emission of elemental mercury (Hg0) from coal-fired power plants (CFPPs). The most cost-effective measure for controlling the emission of mercury involves oxidizing Hg0 to mercury oxides, which are then removed using wet flue gas desulfurization (WFGD). Thus, novel photocatalysts with the best properties of photocatalytic ability and thermal stability need to be developed urgently. In this study, titanium dioxide (TiO2)-based photocatalysts were synthesized through the modification of three metal oxides: CuO, CeO2, and Bi2O3. All the photocatalysts were further characterized using X-ray diffraction, X-ray photoelectron spectroscopy, photoluminescence, and ultraviolet-visible spectrometry. The photocatalytic oxidation efficiencies of Hg0 were evaluated under an atmosphere of N2 + Hg0 at 100–200 °C. The photocatalytic reactions were simulated by kinetic modeling using the Langmuir–Hinshelwood (L–H) mechanism. The results showed that Bi2O3/TiO2 exhibited the best thermal stability, with the best oxidation efficiency at 200 °C and almost the same performance at 100 °C. L–H kinetic modeling indicated that photocatalytic oxidation reactions for the tested photocatalysts were predominantly physical adsorption. Additionally, the activation energy (Ea), taking into account Arrhenius Law, decreased dramatically after modification with metal oxides.

Weakened Interfacial Hydrogen Bond Connectivity Drives Selective Photocatalytic Water Oxidation toward H2O2 at Water/Brookite-TiO2 Interface.

The formation of H2O2 through the two-electron photocatalytic water oxidation reaction (WOR) is significant but encounters the competition with the four-electron O2 evolution reaction. Recent studies showed a crystal-phase dependence in H2O2 selectivity, where high purity brookite TiO2 (b-TiO2) exhibits remarkable H2O2 selectivity in contrast to the common rutile phase TiO2 (r-TiO2). However, the origin of such a structure-induced selectivity preference remains elusive, primarily due to the complexities associated with the solid-liquid interface system and excited-state chemistry. Herein, we conducted a comprehensive investigation into the selectivity mechanism of WOR at the water/b-TiO2(210) and water/r-TiO2(110) interfaces, employing first-principles molecular dynamics simulations and microkinetic analyses. Intriguingly, our results reveal that the intrinsic catalytic ability of the b-TiO2(210) itself does not enhance H2O2 selectivity compared to r-TiO2(110). Instead, it is the weakened interfacial hydrogen bond connectivity, modulated by the herringbone-like local atomic structure of the b-TiO2(210) surface, that determines the selectivity. Specifically, this weakened H-bond connectivity (i.e., local low water density) at the interface, owing to the strong water adsorption and distinct adsorption orientation, can stabilize the OH• radical and inhibit its deprotonation, leading to an improved H2O2 selectivity. By contrast, the relatively strong interface H-bond connectivity established over r-TiO2(110) accelerates the deprotonation of OH•, with the OH• coverage being 3 orders of magnitude lower than at the water/b-TiO2(210) interface. This study quantitatively demonstrates that the local H-bond structure (water density) at the liquid/solid interface significantly influences photocatalytic selectivity, and this insight may offer a rational approach to enhance the H2O2 selectivity.

Porphyrin-Polyoxotungstate Molecular Hybrid as a Highly Efficient, Durable, Visible-Light-Responsive Photocatalyst for Aerobic Oxidation Reactions.

Organic-polyoxometalate (POM) hybrids have recently attracted considerable interest because of their distinctive properties and wide-ranging applications. For the construction of organic-POM hybrids, porphyrins are promising building units owing to their optical properties and reactivity, including strong visible-light absorption and subsequent singlet-oxygen (1O2*) generation. However, the practical utilization of porphyrins as photocatalysts and photosensitizers is often hindered by their own degradation by 1O2*. Therefore, there is a substantial demand for the development of porphyrin-derived photocatalysts with both high efficiency and durability. Herein, we present a porphyrin-polyoxotungstate molecular hybrid featuring a face-to-face stacked porphyrin dimer (I) fastened by four lacunary polyoxotungstates. Hybrid I exhibited remarkable efficiency and durability in photocatalytic aerobic oxidation reactions, and the selective oxidation of various dienes, alkenes, sulfides, and amines proceeded using just 0.003 mol % of the catalyst. Mechanistic investigations suggested that the high activity of I stems from the efficient generation of 1O2*, resulting from the heavy-atom effect of POMs. Furthermore, despite its high efficiency in 1O2* generation compared to free porphyrins, I exhibited superior durability against 1O2*-induced degradation under photoirradiation.

Construction of pyrene-based hydrogen-bonded organic frameworks as photocatalysts for photooxidation of styrene in water

Using hydrogen-bonded organic frameworks (HOFs) as photosensitizers to perform photocatalytic oxidation reactions under green and mild conditions is still a challenge for the application of HOFs materials. This study presents a novel approach that exploits HOFs to enhance the efficiency of photocatalytic oxidation for achieving visible light catalytic oxidation of styrene and its derivatives in the aqueous environment. By using 1,3,6,8-tetrakis(p-benzoic acid)pyrene (H4TBAPy) as the monomer, a pyrene-based hydrogen-bonded organic framework (PFC-1) with a microporous structure was successfully prepared. Compared with monomer H4TBAPy, due to the exciton effect and the interlayer confinement of HOFs, the singlet oxygen (1O2) production efficiency is significantly improved, which has great potential in photocatalytic oxidation reactions. Subsequently, the practicality of PFC-1 as a photocatalyst was studied, and the photocatalytic oxidation of styrene and its derivatives in aqueous solution was achieved under visible light with high catalytic efficiency, indicating that PFC-1 has significant potential to promote photocatalytic oxidation reactions under mild conditions. The utilization of HOFs as photosensitizers in this straightforward approach enables the attainment of green photocatalytic oxidation, hence expanding the potential applications of HOFs materials within the realm of photocatalysis.

De Novo Synthesis of Acridone-Based Zn-Metal-Organic Framework (Zn-MOF) as a Photocatalyst: Application for Visible Light-Mediated Oxidation of Sulfides and Enaminones.

Acridone, a cyclic analogue of benzophenone that undergoes efficient intersystem crossing (ISC) to the triplet-excited state with near-unity quantum yield, was elaborated as a 3-connecting triacid linker, i.e., H3AcTA, to develop a photocatalytic metal-organic framework (MOF) for energy transfer applications; the triacid linker inherently features concave shapes, an attribute that is important for the construction of MOFs with significant porosity. Metal ion (Zn2+)-assisted self-assembly of the triacid yielded a Zn-MOF, i.e., Zn-AcTA, with a solvent-accessible volume of ca. 31%. The protection of the acridone chromophore in the MOF in conjunction with a wider cross-section of its absorption in the visible region renders the MOF an excellent heterogeneous photosensitizer for singlet oxygen (1O2) generation by energy transfer to the ground-state triplet oxygen (3O2). It is shown that the Zn-MOF can be applied as a photosensitizing catalyst for visible light-mediated oxidation of various sulfides to sulfoxides and enaminones to amino-esters via 1,2-acyl migration. It is further demonstrated that the photocatalyst can be easily recycled without any loss of catalytic activity and structural integrity. Based on mechanistic investigations, 1O2 is established as the reactive oxygen species in photocatalytic oxidation reactions. The results constitute the first demonstration of rational development of a photocatalytic MOF based on acridone for heterogeneous oxidations mediated by 1O2.

Imine-linked donor–acceptor metal–organic frameworks for an efficient photocatalytic oxidative coupling reaction

We report two imine-linked donor–acceptor (D–A) MOFs with Cu(i) cyclic trinuclear units (CTUs) via Schiff base condensations and their high photocatalytic activity for aerobic oxidation reaction of benzylamines.