Photocatalytic Dye Degradation Research Articles

Synergistic role of indium doping and g-C3N4 reinforcement in boosting the visible light-triggered rhodamine B and diclofenac sodium salt degradation over rare earth molybdate

Designing and fabricating cost-efficient and eco-friendly photocatalysts for removing organic pollutants from wastewater streams is a crucial research objective for effectively managing industrial effluents to tackle environmental sustainability issues. In this study, we prepared bare cerium molybdate (Ce2(MoO4)3, M1) and indium-doped cerium molybdate (In- Ce2(MoO4)3, M2) photocatalysts via a hydrothermal method. We then synthesized a nanocomposite of In- Ce2(MoO4)3 (M3) with the promising material graphitic carbon nitride (g-C3N4) using an ultrasonication approach. The synthesized photocatalysts were effectively applied to degrade the Rhodamine B dye and diclofenac sodium salt (a drug) from synthetic industrial wastewater through a photocatalysis approach. The impact of indium (In3+) doping on the bare (Ce2(MoO4)3 and the strong interaction between the (In-Ce2(MoO4)3 and g-C3N4 nanosheets were analyzed through physical and electrochemical techniques, including SEM, EDS, XRD, FTIR, UV–Vis spectroscopy, and EIS analysis. The comprehensive photocatalytic degradation of dye and the drug via first-order kinetic parameters under visible light irradiation for all the prepared catalyst samples was evaluated. The nanocomposite In-Ce2(MoO4)3/g-C3N4 exhibited excellent photocatalytic activity, degrading the maximum amount of RhB dye and drug (RhB:96 %, drug:87 %) in 90 min with a higher rate constant (k) compared to In-Ce2(MoO4)3 (RhB:69 %, drug:56 %) and Ce2(MoO4)3 (RhB:56 %, drug:38 %). Furthermore, the In-Ce2(MoO4)3/g-C3N4 samples produced a 7-fold and 3-fold increase in transient photogenerated current response compared to pristine Ce2(MoO4)3 and In-Ce2(MoO4)3 samples, respectively. These findings pave the way for synthesizing an economical, versatile, and efficient In-Ce2(MoO4)3/g-C3N4 photocatalyst to eliminate pollutants from industrial wastewater streams and boost environmental sustainability.

Mycosynthesis of TiO2 nanoparticles using Aspergillus penicillioides for toxic metal removal and photocatalytic applications

Globally, heavy metal pollution, especially lead and nickel, is becoming a problem and is of great concern due to its adverse effects. This study focuses on the eco-friendly biosynthesis of TiO2 nanoparticles using Aspergillus penicillioides metabolites as capping and reducing agents. The myco-synthesized TiO2 nanoparticles were characterized as oblate spherical and applied for photocatalytic removal of lead and nickel from industrial effluent. Optimal conditions for removal included lead and nickel concentrations of 60 μg/mL and 2 μg/mL, 10 μg/mL TiO2 nanoparticle concentration, a pH of 6, and sunlight irradiation. The kinetics and isotherm of adsorption were explained. Effective degradation of lead and nickel by using TiO2 nanoparticles was confirmed by atomic absorption spectroscopy. The nanoparticles demonstrated effective photocatalytic degradation of crystal violet dye achieved a high of 86.9% in 4h and 25% in 2 h, respectively, and showed promising biological activities, including antibacterial, antioxidant, and protein leakage properties. The hemolytic assay confirmed their ecological sustainability for bioremediation. The study highlights the effectiveness of new bio-based TiO2 nanoparticles arbitrated by Aspergillus penicillioides as effective bioremediation agents.

Synthesis, Magnetic, and Photocatalytic Activity of Polypyrrole-Based TiO2–Fe Catalyst for Wastewater Treatment

The primary aim of this study is to investigate the degradation efficacy of the Ppy/TiO2-Fe photocatalyst for MB dye in an aqueous solution. Firstly, the direct addition of TiO2 and Fe was done to prepare Ppy/TiO2-Fe photocatalyst. Fourier transformation infrared spectroscopy, XRD, SEM, BET surface area analysis, and magnetization tests established the formation of the Ppy/TiO2-Fe photocatalyst. The crystallite sizes of TiO2, Fe-TiO2, and Ppy/TiO2-Fe photocatalyst were estimated to be 24.99 nm, 21.94 nm, and 21.84 nm, respectively. For the synthesis confirmation, the FTIR spectrum confirmed the existence of Ti-O, Fe-O, and Ppy-related bonds. While comparing the SEM images, the impact of polypyrrole on the particle shape was observed with less aggregation and increased surface roughness. The VSM analysis revealed that incorporating polypyrrole (Ppy) into Fe-TiO2 significantly enhances its magnetic properties, with Ppy/TiO2-Fe exhibiting superparamagnetic behavior, characterized by a higher saturation magnetization (Ms) of 33.11 emu/g and a lower coercivity (Hc) of 0.160 Oe, compared to Fe-TiO2’s Ms of 1.09 emu/g and Hc of 341.39 Oe. The N2 sorption desorption, with a specific surface area of 2.25 × 102 m2/g, is beneficial for photocatalytic activity. The concentration of dye, amount of catalyst, pH, and temperature were studied to evaluate the photocatalytic efficiency of the synthesized Ppy/TiO2-Fe photocatalyst under different conditions. The findings revealed a degradation efficiency of 91.92%. The degradation rate reached 91.92% under optimal conditions within 120 min and could be fitted well by first-order kinetics. The photocatalytic efficiency was also evaluated for the scavenger, and the concentration of H2O2 and the reusability of the catalyst were demonstrated. Based on the observed results, the Ppy/TiO2-Fe photocatalyst could be applied more effectively and efficiently to photocatalytic degradation of organic dyes in wastewater treatment.

Photocatalytic degradation of malachite Green dye using Ti3C2 MXene nanosheets decorated with Fe3O4 NPs under visible light irradiation

Photocatalytic degradation of malachite Green dye using Ti3C2 MXene nanosheets decorated with Fe3O4 NPs under visible light irradiation

Preparation of CeO2@AC and CeO2@NF nanocomposites for waste water treatment

This research focuses on the elimination of Rose bengal dye using nanoparticles consisting of cerium oxide (CeO2) loaded onto activated carbon (CeO2@AC) and carbon nanofibers (CeO2@NF). These nanoparticles were developed through co-precipitation techniques. X-ray diffraction and transmission electron microscopy (TEM) were employed to verify the structural properties and crystalline dimensions of these nanocomposites. The average particle sizes for CeO2, CeO2@AC, and CeO2@NF nanocomposites are determined to be 7.5 nm, 10.5 nm, and 10.0 nm, respectively from XRD. The TEM images shows regularly shaped spherical particles falling within the size range of 7 to 15 nm. Raman spectroscopy and X-ray photoelectron spectroscopy were utilized to investigate their electronic characteristics and the presence of lattice defects, specifically oxygen vacancies, was quantified. The distinctive structure and lattice defects contribute to the photocatalytic degradation of RB dye, with CeO2, AC, and NF exhibiting photocatalytic efficiencies of 75 %, 88 %, and 89.8 %, respectively, when exposed to UV light. Additionally, the magnetic properties of the synthesized samples were examined using a vibrating sample magnetometer. Consequently, cerium oxide nanocomposites combined with activated carbon and nanofibers have demonstrated their utility as multifunctional materials, suitable for photocatalysis.

Unravelling the efficiency of CoAl-LDH / g-C3N4 nanosheets: Type-II heterojunction for photocatalytic hydrogen production and dye degradation under solar light irradiation

The generation of hydrogen fuel, and wastewater treatment according to solar-driven catalysis possesses considerable prospective for establishing a carbon-neutral and ecologically sound power infrastructure. Driven by this problem, we suggest in this study, adopting a simple impregnation method, a customized association of CoAl-LDH and graphitic carbon nitride (CN), a visible light active narrow and wide band gap semiconductors. Several characterization approaches were implemented to understand the CoAl-LDH@g-C3N4 (CACN) composites' physiochemical and optical features. The CACN hetero structural forms exhibited significantly improved solar light-induced photocatalytic H2 generation and dye pollutants decomposition in contrast with pristine materials. The most effective catalyst 5 wt% CoAl-LDH@g-C3N4 (5-CACN) generated the highest hydrogen (∼430.7 μmolg−1h−1), which is 11.9-fold H2 production efficiency compared with CN and depicted significant Brilliant black dye removal efficacy via photocatalytic degradation (up to ∼79%). This was primarily ascribed to the development of the Type-II CACN heterojunctions, which promoted the separation of charges and expanded the abundance of surface-active sites while absorbing the visible spectrum of solar light.

Integration of orange peel derived carbon quantum dots with TiO2 for enhanced photocatalytic degradation of brilliant green dye

Brilliant green (BG) dye is a non-biodegradable, highly venomous and coloured pigment. BG dye possesses remarkably high visibility even at small concentration that causes diarrhea and abdominal pain in humans when being ingested. In addition, it is harmful to living organisms and polluting aquatic environments. Hence, eliminating BG dye from contaminated water is an urgent need. In this report, a photocatalyst encompasses hydrothermally prepared titanium dioxide (TiO2) integrated with orange peel derived oxygenated carbon quantum dots (O-CQDs) was developed for effective removal of BG dye. The O-CQDs were prepared using a single step eco-friendly hydrothermal process and an intense green fluorescence was observed upon exposing the O-CQDs to far UV light irradiation (254 nm). The formation of TiO2/O-CQDs nanohybrid was confirmed through UV–Visible spectrophotometer, X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM) and X-ray photoelectron spectroscopy (XPS) analyses. A random distribution of spherical shaped O-CQDs on the surface of TiO2 was clearly observed in FESEM images. The carboxyl groups present in O-CQDs not only increased interlayer spacing but also led to the attachment of TiO2 effectively. The TiO2/O-CQDs nanohybrid showed 94.70 % efficiency towards photocatalytic degradation of BG dye under UV light irradiation that was ∼20 % higher than the efficiency of pristine TiO2 photocatalyst. The presence of O-CQDs in the TiO2/O-CQDs nanohybrid boosted the photocatalytic degradation efficiency by enhancing UV light absorption and suppressing photo-generated electron–hole recombination. The integration of agricultural waste derived carbon with TiO2 by a facile synthesis method paves a way for large scale synthesis of TiO2/O-CQDs nanohybrid, which is anticipated to broaden its application potential in environmental remediation through photocatalytic degradation of organic compounds.

Investigation of bacteriostatic performance of the one-pot bio-fabricated ZnONPs using Saraggrssum extract for photocatalytic degradation of malachite green dye

Investigation of bacteriostatic performance of the one-pot bio-fabricated ZnONPs using Saraggrssum extract for photocatalytic degradation of malachite green dye

Biogenic synthesis of porous CuO nanoparticles: Synergistic effects in photocatalytic dye degradation and electrochemical energy storage applications

This study explores the biogenic synthesis of CuO nanoparticles functionalized with Solanum nigrum, using Acalypha indica leaf extract as a reducing agent. The biogenically synthesized CuO nanoparticles were comprehensively characterized by various analytical techniques, involves X-ray diffraction analysis (XRD), BET surface area analysis (BET), energy-dispersive X-ray spectroscopy (EDAX), X-ray photoelectron spectroscopy (XPS), UV–Visible spectral analysis (UV), Fourier transform infrared spectroscopy (FTIR), fluorescence spectroscopy, photocatalytic degradation, antimicrobial assay, cytotoxicity assay, electrochemical analysis, and linear sweep voltammetry studies. The XRD analysis revealed end centered monoclinic phase with a 10 nm average crystalline size. BET analysis showed a mesoporous structure with a surface area of 11.54 m2/g. XPS and EDAX confirmed the presence of Cu2+ and O2− ions. SEM and TEM images indicated spherical, and porous nanostructures. UV–Visible spectroscopy identified an active optical range of 508–518 nm (2.40–2.45 eV), suggesting potential photocatalytic activity. The photocatalytic degradation efficiencies of Methylene blue (98.8 %) and Rhodamine B (95 %) were achieved after 100 min of irradiation. Antimicrobial tests demonstrated effectiveness against Staph. aureus, E. coli, Shigella flexneri, and Candida tropicalis. The nanoparticles exhibited notable cytotoxicity against colorectal cancer cells with IC50 values of 58.66 μg/ml and 66.78 μg/ml. Additionally, a symmetric supercapacitor electrode using these nanoparticles achieved a specific capacitance of 375 Fg−1 at the current density of 1 Ag−1. This research underscores the versatile applications of biogenic CuO nanoparticles in photocatalysis, antimicrobial treatments, cancer therapy, and energy storage.

Anchoring TiO2 and CuO nanoparticles on SnO2 nanotube arrays to construct ternary heterostructure for visible-light-driven photocatalytic degradation of green malachite dye

Designing and constructing heterostructure photocatalysts is necessary to facilitate the long-term separation of photogenerated charge carriers and enhance photocatalytic efficiency. Herein, a ternary nanocomposite photocatalyst based on SnO2, TiO2 and CuO semiconductors was successfully synthesized and employed as a highly effective photocatalyst for the malachite green (MG) dye degradation under visible light irradiation. According to the results, the ternary SnO2/TiO2/CuO nanocomposite demonstrated impressive photocatalytic activity (98.4 %) compared to pristine SnO2 nanotubes (40.3 %), binary SnO2/TiO2 (76 %) and SnO2/CuO nanocomposites (88 %), when exposed to 90 min of visible illumination. The photoreaction rate constant of SnO2/TiO2/CuO nanocomposite (0.0482 min−1) was found to be ∼8.5 times faster than SnO2 nanotubes (0.0057 min−1) against MG dye. This enhancement in photocatalytic performance can be attributed to the introduction of TiO2 and CuO which effectively suppress the recombination of photogenerated electron-hole pairs, accelerate the transfer of charge carriers, increase the active sites, and improve the optical absorption properties. Scavengers were used to elucidate the photocatalytic mechanism, exhibiting the pivotal role of •O2− and h+ in the photodegradation process. Besides, recyclability tests showed acceptable results after four cycles, confirming the stability and durability of the SnO2/TiO2/CuO nanocomposite against RhB dye degradation.

Synergistic degradation of toxic azo dyes using Mn-CuO@Biochar: An efficient adsorptive and photocatalytic approach for wastewater treatment

Congo red (CR) and Eriochrome Black T (EBT) is a toxic azo dye with a complex structure which represents a serious Ecotoxicological hazards for aquatic bodies. This research investigates the synergistic effects of Corn plants biochar and manganese (Mn)-composited copper oxide (CuO) in the adsorptive and photocatalytic degradation of toxic anionic dyes i.e. CR and EBT. The acquired materials were characterized by FTIR, XRD, SEM-EDX, XPS, TEM, BET, ZP, and pHZc test. The experiment demonstrated that Mn-CuO@BC composite exhibited a remarkable adsorption of ∼ 98 % and ∼ 95 % and photocatalytic degradation of 92 % and 88 % for CR and EBT respectively. It was further found that coupling of the H2O2 with Mn-CuO@BC enhances the photocatalytic efficiency of catalyst for CR and EBT i.e. upto ∼ 98 % and 96 % respectively possibly owing to the efficient ●OH radical. Adsorption kinetics followed a pseudo 2nd order model, indicating predominant chemisorption, and adsorption isotherms fit well with the Langmuir model. Further, toxicity degradation products of EBT were examined through ECOSAR indicated a reduced ecological impact. In general, this work highlight the dual functional advantages of the Mn-CuO@BC composite, providing an efficient and versatile approach for wastewater treatment involving complex dye pollutants.

Photocatalytic degradation of reactive blue-4 dye from wastewater with α-Bi2O3 microrods under natural sunlight

Photocatalytic degradation of reactive blue-4 dye from wastewater with α-Bi2O3 microrods under natural sunlight

Crystallization behaviour, structure, and photocatalytic properties of SiO2-B2O3-Li2O-WO3-Bi2O3 glass-ceramics containing Bi2WO6 crystals

SiO2-B2O3-Li2O-WO3-Bi2O3 system parent glass was prepared by the melt-quenching method and glass-ceramics containing the Bi2WO6 crystals were obtained by a one-step heat treatment. The crystallization kinetics of the parent glass were investigated, and the effect of the different heat-treatment regimes on the microscopic morphology and optical bandgaps of the glass-ceramics was discussed. The results show that the crystallization activation energy of the parent glass is about 300 kJ/mol and the precipitated Bi2WO6 crystals exist in a columnar structure. As obtained from the UV-Vis spectra, the glass-ceramic with a heat treatment regime of 640 °C/2 h has the smallest optical bandgap (2.45 eV). During the photocatalytic degradation of methylene blue dye, the glass-ceramic with a heat treatment regime of 640 °C/2 h shows the best catalytic degradation performance, reaching a dye degradation rate of 76% at 120 min. The experimental results indicate that glass-ceramics containing Bi2WO6 crystals have promising applications in the field of sewage treatment.

Solar light-mediated photocatalytic degradation of noxious organic dyes by Co2+ and Y3+ co-doped Ni0.6Mg0.4Fe2O4 spinel nanoferrites

Solar light-mediated photocatalytic degradation of noxious organic dyes by Co2+ and Y3+ co-doped Ni0.6Mg0.4Fe2O4 spinel nanoferrites

Green-synthesized BiFeO3 nanoparticles for efficient photocatalytic degradation of organic dyes, antibiotic and catalytic reduction of 4-nitrophenol

Green-synthesized nanoparticles have recently emerged as promising catalysts for the removal of toxic dyes from water bodies. In this article, Bismuth ferrite (BiFeO3) nanoparticles were synthesized by a simple and low-cost method using Couroupita guianensis plant leaf extract. The particles were used as photocatalysts for degrading RhB, MO dyes, and TC antibiotics, as well as for reducing toxic 4-NP to useful 4-AP. The synthesized nanoparticles were characterized using several state-of-the-art tools. The formation of perovskite structure and the presence of biomolecules on the surface of BiFeO3 nanoparticles was confirmed by FTIR analysis. Raman spectrum revealed a rhombohedral structure of BiFeO3 nanoparticles, corroborating the XRD analysis. FESEM micrograph demonstrated irregularly shaped agglomerated nanoparticles. The average hydrodynamic diameter was estimated to be 51 nm using the DLS technique. The optical energy bandgap of the bismuth ferrite was estimated using Tauc’s relation for direct bandgap semiconductors. SQUID measurements revealed that these nanoparticles exhibit a weak ferromagnetic ordering. Furthermore, these nanomaterials degraded the cationic and anionic dyes effectively because of the formation of hydroxyl radicals, confirmed by the scavenger test. The photocatalytic degradation pathway of RhB dye was investigated through LC-MS analysis, and the intermediate degradation products were identified. The prepared material also exhibited excellent catalytic efficiency in a short duration of time. This study proclaims that these nanoparticles can be used as potential catalysts for the purification of water.

Simplistic preparation of Sn-doped MgIn2S4 for photocatalytic organic dye degradation under visible light irradiation

Simplistic preparation of Sn-doped MgIn2S4 for photocatalytic organic dye degradation under visible light irradiation

Plant-synthesis of co-doped tin dioxide nanocomposite with magnetic activity and its photocatalytic performance assessment on dyes and pesticides

The hydrothermal method was used to introduce different amounts of Praseodymium ion (Pr3+) (1, 3, 5, 7, 9, and 11 at.%) and Yttrium ion (Y3+) (1, 3, 5, 7, 9, and 11 at.%) into existing SnO2 nanoparticles. A novel nanocomposite was created by combining Fe3O4 and SnO2:Pr3+,Y3+ nanoparticles, resulting in a material with magnetic properties, i.e., Fe3O4/SnO2:Pr3+,Y3+, named FPYS. Subsequently, the hydrothermal synthesis approach was utilized to produce nanocomposites of FPYS in the presence of plant extract. The photodecomposition efficiency of as-synthesized nanocomposite was studied with some selected dyes and pesticides under 50W LED light. The present study focused on experimentally optimising the key parameters like the initial concentration, photocatalyst quantity, photocatalyst reuse, and pH level. By employing the Langmuir-Hinshelwood model, we successfully calculated the rate at which RhB, MB, 2,4-DCP, and MB undergo photocatalytic degradation under optimal conditions (pH = 7, pollutant concentration = 8 ppm, volume of pollutants = 20 mL, and photocatalyst amount = 3 mg). The model showed that MB, RhB, 2,4-DCP, and TCAA have k values of 0.061, 0.062, 0.051, and 0.036 min−1, respectively. The breakdown rate for MB dye was 81% and for RhB dye was 78% with nanocomposite made in the presence of 2 mL of Parkia speciosa extract, which was subjected to LED radiation for 150 min at pH 7. The degradation rates of 2,4-DCP and TCAA differed, i.e., the former was degraded by 68% and the latter by 52%. Pr3+ and Y3+ ions co-doped with SnO2 enhanced the photocatalytic degradation of dyes and pesticides.

Construction of Type-II Zn-SnO2/BiOBr Heterojunctions with Dual-oxygen Vacancies for Enhanced Photocatalytic Degradation

Zn-SnO2/BiOBr, a novel heterojunction material for photocatalytic dye degradation, was synthesized successfully using the one-step hydrothermal method. The formation of the heterojunction enhanced the vacancy coupling effect. The photocatalytic experiment results showed that the degradation rate of Rhodamine B (RhB) due to 0.3Zn-SnO2/BiOBr (the heterojunction formed when the molar ratio of Zn-SnO2 to BiOBr was 0.3) within 15 min was 9.27 and 476.9 times that of BiOBr and Zn-SnO2, respectively. Additionally, the degradation rate of basic fuchsin (BF) due to 0.3Zn-SnO2/BiOBr was 4.2 and 21.9 times that of BiOBr and Zn-SnO2, respectively. The significantly improved photocatalytic performance was because many oxygen vacancies in Zn-SnO2/BiOBr collaborated with the type-II heterojunction to promote a narrow bandgap value efficiently, increasing the photogenerated electrons (e–) and hole (h+), an increased charge separation efficiency under visible light, and favored the photocatalytic degradation of dyes.

Microwave-assisted CuO-modified porous ZnO nanosheet for photocatalytic degradation of organic pollutants and antibacterial inactivation

The present study investigated the development of a porous ZnO/CuO photocatalyst for photocatalytic dye degradation and antibacterial inactivation of bacteria. Porous ZnO nanosheets are prepared by calcinating inorganic-organic ZnS(en)0.5. Further, CuO was integrated on a porous ZnO nanosheet using the microwave (MW)-assisted synthesis technique. Additionally, the effect of CuO at different concentrations on the photocatalytic activity of CuO/ZnO was investigated. Under 1.5G light illumination, an optimized ZnO/CuO-5 photocatalyst exhibited higher degradation efficiencies of 99.3%, 98%, and 99% for orange II dye, methylene blue (MB), and Eosin-Y respectively. The optimized photocatalyst exhibited inactivation efficiencies of 98% and 90% towards Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) bacteria, after 3h. The enhanced photocatalytic activity was attributable to a porous structure, extended visible light responsiveness, and delayed electron-hole recombination in nanostructured CuO/ZnO photocatalysts. Moreover, radical scavenger tests confirmed that superoxide radicals (•O2−) accompanied most degradation, followed by holes (h+) as minor factors. Our work suggests a simple photocatalytic interfacial engineering technique based on porous ZnO/CuO nanostructures to decompose organic chemicals and inactivate microorganisms in wastewater sources.

A Honeycomb Layered Na2SnO3 as Novel Photocatalyst for Degradation of Rose Bengal Dye

AbstractA layered Na2SnO3 with honeycomb structure was synthesized by solid state route using sodium carbonate and tin oxide. The prepared sample was characterized by different physicochemical characterization techniques like X‐ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X‐ray spectroscopy (EDS), X‐ray photoelectron spectroscopy (XPS), ultraviolet visible spectroscopy (UV–vis), photoluminescence spectra (PL), N2 adsorption technique (Brunauer–Emmett–Teller, electrochemical impedance spectroscopy (EIS). The photodegradation of rose bengal dye under UV light was studied. Due to honeycomb structure and high surface area of Na2SnO3, the complete degradation of rose Bengal was observed in 90 min under UV light irradiation. Results of photocatalytic dye degradation reaction demonstrated that Na2SnO3 can be employed as photocatalyst under UV light irradiation.