Photocatalytic System Research Articles

(Invited) Porous Crystalline Frameworks as Intrinsic Photocatalytic Materials

Porous crystalline materials such as metal organic frameworks (MOFs) and covalent organic frameworks (COFs) represent a novel class of materials for catalysis due to their inherent porous nature, exceptional thermal and chemical stability, structural flexibility. While many photocatalytic systems based on these materials have been developed in the past decade, a significant gap exists in our understanding of the correlation of photophysical and photocatalytic properties of MOFs/COFs with their structure, which hinders accurate prediction and informed design. We aim to address this challenge using an interdisciplinary approach that combines innovative material design and synthesis, fundamental mechanistic studies, theoretical prediction, and photocatalytic performance evaluation. In this talk, I will discuss our recent progress in developing porous crystalline materials as intrinsic light harvesting materials and heterogenous catalysts for solar fuel generation.

Facile synthesis of hierarchical core-shell carbon@ZnIn2S4 composite for boosted photothermal-assisted photocatalytic H2 production

Against the backdrop of energy shortage, hydrogen energy has attracted much attention as a green and clean energy source. In order to explore efficient hydrogen production pathways, we designed a composite photocatalyst with carbon-based core-shell photothermal-assisted photocatalytic system (Carbon@ZnIn2S4, denoted as C@ZIS). The well-designed catalyst C@ZIS composites demonstrated a photocatalytic hydrogen precipitation rate of 2.97 mmol g-1 h−1 even in the absence of the noble metal Pt co-catalyst. The incorporation of carbon-based core-shell photocatalysts into a photocatalytic reaction significantly affects the activity of the reaction by triggering a photothermal effect in the reaction solution. The results of the physicochemical experiments demonstrated that the carbon spheres in C@ZIS composite system could provide a greater number of active sites, thereby accelerating the electron transfer and separation efficiency, and thus enhancing the photocatalytic activity. The study presents an efficacious design concept for the development of efficacious carbon-based core-shell photothermal-assisted photocatalysts, which is anticipated to facilitate the efficient conversion of solar energy to hydrogen energy.

(Invited) Semiconductor Nanostructures for Light Energy Conversion

This talk will review some of the key developments of semiconductor quantum dots based light energy conversion. Semiconductor nanostructures are finding new ways to design light energy conversion devices (e.g., thin film solar cells and light emitting devices). The decreased consumption of energy during the manufacture and the lessened use of semiconductor materials lowers the overall carbon footprint with energy payback time less than a year for such devices. The early studies which focused on the synthesis of various semiconductor nanostructures and exploration of their size dependent optical and electronic properties have led to their their integration in high efficiency thin film solar cells.. Unlike solar cell devices, photocatalytic processes are yet to deliver conversion efficiencies and stability that can make them compatible for practical applications. Understanding the limitations imposed by interfacial charge transfer processes remains a key to further advance photocatalytic systems for chemical energy storage. Recent developments in utilizing semiconductor nanostructures for light energy conversion and storage will be discussed.

CoP electrodeposited on TiO2 nanorod arrays as photoanode for enhanced photoelectrochemical water splitting

AbstractIt is of great significance to design photoelectrodes with high carrier separation and transport efficiency in photocatalytic water separation systems. In this study, we used a simple electrochemical deposition method to regulate the load of co‐catalyst CoP on TiO2 nanorods to improve the photoelectrochemical properties. The photocurrent density of TiO2/CoP (20) photoanode at 1.23 V increases to 1.57 mA/cm2, which is 3.4 times that of original TiO2. Long‐term photoelectrolysis reveals that this electrode has excellent stability. Mechanistic studies support the role of CoP nanoparticles in improving photoelectrochemical property and imply that the excellent photoelectrochemical property of TiO2/CoP photoanode is mainly ascribed to the suppress of surface photogenerated electrons and holes recombination due to the construction of built‐in electric field between TiO2 and CoP.

'Accelerated' Deactivation of Carbon Nitride Photocatalyst for Solar Hydrogen Evolution.

Carbon nitride photocatalysts are among the most studied candidates for efficient solar hydrogen (H2) production due to their abundance of precursors, suitable bandgap, and visible light utilization. However, the polymeric nature of carbon nitride materials raises concerns regarding the self-decomposition during photocatalytic redox processes. Yet, the operational stability of carbon nitride photocatalysts for solar H2 production remains under-explored. Here we evaluate the photostability of carbon nitride photocatalysts with platinum (Pt) as the co-catalyst for solar H2 evolution and significant deactivation of this photocatalyst is observed under'accelerated' testing conditions. It is demonstrated that the detachment of the Pt co-catalyst on the surface of carbon nitride is the major reason for this deactivation, which can be attributed to a synergistic effect of photo-corrosion and mechanical stirring. The photo-corrosion weakens the interfacial bonding between carbon nitride and Pt co-catalyst, while continuous collisions from the mechanical stirring promote the detachment of co-catalysts from the surface of carbon nitride. These understandings provide insights into the rational design of photocatalysts and photocatalytic systems for improved operational stability.

Photoactive Donor–Acceptor Covalent Organic Framework Material for Synergistic Cyclization Approach to Imidazole Derivatives

ABSTRACTAs one of the most potential platforms for heterogeneous catalysis, two‐dimensional porphyrin‐based covalent organic frameworks (COFs) have attracted great research interests. In this work, following the correlation of COF structure and their performance, a type of donor–acceptor 2D COF (Por‐COF‐Zn) based on porphyrin and thiophene units was designed and easily constructed by one‐pot method using 5,10,15,20‐tetra‐(4‐aminophenyl)porphyrin (TAPP), thieno[3,2‐b]thiophene‐2,5‐dicarbaldehyde, and zinc acetate. The as‐synthesized COF material is tested to show high crystallinity and good thermal and chemical stability. The Brunauer–Emmett–Teller (BET) measure results show that the specific surface area of Por‐COF‐Zn is 413.6 m2g−1, and the pore volume is 0.279 cm3g−1. Transient photocurrent response and EIS measurement also demonstrate that Por‐COF‐Zn exhibits an efficient separation of photogenerated electron/hole pairs. The photocatalytic performance of the resulted COF was further evaluated by using intramolecular cyclization of N‐phenyl‐o‐phenylenediamine and benzaldehyde to form benzimidazole derivative. The catalyst system exhibited good to high conversion efficiency, moderate substrate applicability, and excellent stability and recyclability for the catalytic cyclization approach of benzimidazoles. The catalytic mechanism should be contributed to the synergistic effect of organic framework and metallic zinc. Our current work also provides valuable information for understanding COF‐based photocatalytic systems and further highlight new insights to meet new challenges of heterogeneous photocatalysis.

Electronic Structure and Functions of Carbon Nitride in Frontier Green Catalysis.

ConspectusGraphitic carbon nitride-based materials have emerged as promising photocatalysts for a variety of energy and environmental applications owing to their "earth-abundant" nature, structural versatility, tunable electronic and optical properties, and chemical stability. Optimizing carbon nitride's physicochemical properties encompasses a variety of approaches, including the regulation of inherent structural defects, morphology control, heterostructure construction, and heteroatom and metal-atom doping. These strategies are pivotal in ultimately enhancing their photocatalytic activities. Previous reviews with extensive examples have mainly focused on the synthesis, modification, and application of carbon nitride-based materials in photocatalysis. However, there has been a lack of straightforward and in-depth discussion to understand the electronic characteristics and functions of various engineered carbon nitrides as well as their precise tailoring strategies and ultimately to explain the regularity and specificity of their improved performance in targeted photocatalytic systems. In the past ten years, our group has conducted extensive investigations on carbon nitride-based materials and their application in photocatalysis. These studies demonstrate the close yet intricate relationship between the electronic structure of carbon nitride materials and their photocatalytic reactivity. Understanding the electronic structure and functions of carbon nitride, as well as different engineering strategies, is essential for the improvement of photocatalytic processes from fundamental study to practical applications.To this end, in this Account, we first delve into the nature of the electronic properties of carbon nitride, highlighting the electronic structures, including band structure, density of states, molecular orbitals, and band center, as well as its electronic functions, such as the charge distribution, internal electric field, and external electric force. Subsequently, based on recent research in our group, we present a detailed discussion of the strategic modifications of carbon nitride and the consequential impacts on the physicochemical properties, particularly the optical properties and intrinsic electronic characteristics, for enhancing the photocatalytic performance. These modifications are categorized as follows: (i) component changing, which involves intralayer and interface heterojunctions as well as homojunctions, to modulate the band-edge potentials and reactivity of photoinduced electrons and holes toward surface redox reactions; (ii) dimensional tuning, which engineers the dimensional structure of carbon nitride, to influence the electron transfer direction; (iii) defect and heteroatom modification, which introduces a symmetry break in the carbon nitride framework, to promote charge redistribution for altering the charge density and electronic structure; and (iv) anchoring of single-atom metals to facilitate orbital hybridization and charge transfer enhancement through the unique metal-N coordination configurations. Finally, we propose an appraisal of the prospects and challenges in the precise manipulation and characterization of the electronic structure and functions of carbon nitride. The integration of in situ electronic structure analysis, theoretical calculation based on machine learning, and precise mechanism study may propel its substantial development in the light-driven circular economy. We hope this Account aspires to offer novel insights and perspectives into the operational mechanisms and tailored structure of carbon nitride-based materials in photocatalysis.

Photocorrosion suppression of copper sulfide via hybridization with amino-functionalized metal–organic framework for natural sunlight-driven photocatalysis

Natural sunlight-driven photocatalysis has been considered as an energy sustainable strategy for the synthesis of fine chemicals, since natural sunlight is inexhaustible. Copper sulfide (CuS) with broad light absorption holds great promise for natural sunlight utilization, while hole-induced photocorrosion seriously hampers its photoactivity and photostability. Herein, we inhibited the photocorrosion by hybridizing CuS with amino-functionalized metal–organic framework of NH2-MIL-125(Ti) (NM125) to fabricate a Z-scheme heterojunction. Taking advantage of high binding affinity of amino group and copper ion, CuS nanoparticles (NPs) were in situ anchored on NM125 surface via amino group-assisted coordination. Characterization results suggested the diffusion-controlled charge migration in NM125@CuS(x) hybrids, where photoinduced electrons in conduction band (CB) of NM125 transferred to valence band (VB) of CuS, and then combined here. The Z-scheme charge transport could timely consume the photogenerated holes of CuS, and spatially separated the charge carriers. As a result, the obtained NM125@CuS(x) catalysts were highly efficient and stable in natural sunlight-driven Phillips-Ladenburg reaction in air, providing serial benzimidazoles with excellent yields (90–98%). Such natural sunlight-driven photocatalysis system efficiently utilized natural sunlight to synthesize high-value fine chemicals in open air at mild conditions, which opens up a sustainable avenue for the green development of fine chemical engineering.

Enhanced activation of peroxymonosulfate by ZIF-67/g-C3N4 S-scheme photocatalyst under visible light assistance for degradation of polyethylene terephthalate

Photocatalyst-activated peroxymonosulfate (PMS) degradation of pollutants is already widely used for wastewater treatment under visible light. Polyethylene terephthalate (PET) is widely used in daily life, but waste plastics have an irreversible negative impact on the environment. In this paper, the ZIF-67/g-C3N4 S-scheme heterojunction catalyst was synthesized as a photocatalyst to achieve a good effect on PET degradation in coordination with PMS. The results indicated that PET could be degraded up to 60.63 ± 2.12 % under the combined effect of catalyst, PMS, and light. In this experiment, the influence of catalyst-to-plastic ratio, PMS concentration, aqueous pH, and inorganic anions on plastic degradation by the photocatalytic synergistic PMS system was discussed, and the excellent performance of this system for degrading PET was highlighted through a comparative test. Electron spin resonance (ESR) and free radical quenching experiments demonstrated that SO4•− contributes the largest amount to the PET degradation performance. Furthermore, results from gas chromatography and liquid chromatography-mass spectrometry (LC-MS) indicated that the plastic degradation products include CO, CH4, and organic small-molecule liquid fuels. Finally, a possible mechanism for the light/PMS system to degrade PET in water was suggested. This paper provides a feasible solution to treat waste microplastics in water.

Efficient photoredox catalysis in C–C cross-coupling reactions by two-coordinated Au(I) complex

Photocatalysis provides a versatile approach to redox activation of various organic substrates for synthetic applications. To broaden the scope of photoredox catalysis, developing catalysts with strong oxidizing or reducing power in the excited state is imperative. Catalysts that feature highly cathodic oxidation potentials and long lifetimes in their excited states are particularly in demand. In this research, we demonstrate the catalytic utility of two-coordinate Au(I) complex photocatalysts that exhibit an exclusive ligand-to-ligand charge-transfer (LLCT) transition in C–C cross-coupling reactions between N-heterocycles and (hetero)aryl halides, including redox-resistant (hetero)aryl chlorides. Our photocatalysis system can steer reactions under visible-light irradiation at a catalyst loading as low as 0.1 mol% and exhibits a broad substrate scope with high chemo- and regioselectivity. Our mechanistic investigations provide direct spectroscopic evidence for each step in the catalysis cycle and demonstrate that the LLCT-active Au(I) complex catalysts offer several benefits, including strong visible-light absorption, a 210 ns-long excited-state lifetime without short-lived components, and a 91% yield in the production of free-radical intermediates. Given the wide structural versatility of the proposed catalysts, we envision that our research will provide useful insights into the future utilization of the LLCT-active Au(I) complex for organic transformations.

Fabrication of Ag NPs decorated TiO2/WO3 S-scheme heterojunction for efficiently mineralizing gaseous toluene

The energy band structure and corresponding carrier transfer efficiency are crucial roles in photocatalysis performance, especially involving the volatile organic compounds (VOCs) degradation in gas-solid phase photocatalytic systems. Herein, we reported a S-scheme heterojunction photocatalyst of Ag@WO3/TiO2. The photocatalytic experiments display that Ag@WO3/TO2 (denoted as Ag@h-WT) possesses almost 94 % of toluene removal rate and nearly 90 % mineralization after 60 min irradiation under simulated sunlight, superior to those of pure TiO2 and h-WO3 as well as binary WO3/TO2 heterojunction. The improved photocatalytic activity is mainly ascribed to i) the formation of S-scheme heterojunction. ii) The Ag nanoclusters promotes the carrier separation and broadens the light absorption region.

Modulating the Microenvironments of Robust Metal Hydrogen‐Bonded Organic Frameworks for Boosting Photocatalytic Hydrogen Evolution

AbstractHydrogen‐bonded organic frameworks (HOFs) are outstanding candidates for photocatalytic hydrogen evolution. However, most of reported HOFs suffer from poor stability and photocatalytic activity in the absence of Pt cocatalyst. Herein, a series of metal HOFs (Co2‐HOF‐X, X=COOMe, Br, tBu and OMe) have been rationally constructed based on dinuclear cobalt complexes, which exhibit exceptional stability in the presence of strong acid (12 M HCl) and strong base (5 M NaOH) for at least 10 days. More impressively, by varying the ‐X groups of the dinuclear cobalt complexes, the microenvironment of Co2‐HOF‐X can be modulated, giving rise to obviously different photocatalytic H2 production rates, following the −X group sequence of −COOMe>−Br>−tBu>−OMe. The optimized Co2‐HOF‐COOMe shows H2 generation rate up to 12.8 mmol g−1 h−1 in the absence of any additional noble‐metal photosensitizers and cocatalysts, which is superior to most reported Pt‐assisted photocatalytic systems. Experiments and theoretical calculations reveal that the −X groups grafted on Co2‐HOF‐X possess different electron‐withdrawing ability, thus regulating the electronic structures of Co catalytic centres and proton activation barrier for H2 production, and leading to the distinctly different photocatalytic activity.

Photocatalytic Three-Component Acylcarboxylation of Alkenes with CO2.

γ-Keto acid is a valuable chemical motif in a wide range of fields including organic, biological, and medicinal chemistry. However, its single-step synthesis is challenging because of the mismatch of the carbonyl polarity and low tolerance of carboxylic acids. Herein, we report the single-step syntheses of γ-keto acids using alkenes and CO2. Our photocatalytic system enabled the transformation of alkenes under mild conditions in high yields (up to 95%) with broad substrate generality (35 examples).

Boosting nitrogen photofixation through interface electron reconstruction using mixed-valent copper as mediator

Solar energy as the inexhaustible and pollution-free renewable energy is widely accepted. Photocatalysis is an efficient green process to store solar energy in the form of chemical energy or utilize it for NH3 production or water treatment reactions. Herein, CeO2–CeCO3OH all-solid-state heterojunctions with Cu2O/Cu Schottky barrier medium are assembled firstly, and the remarkable photo-catalytic performances are obtained. The heterojunction structure can promote the separation efficiencies of photo-induced electron-hole pairs. Otherwise, the as-prepared catalysts also have more visible light absorption capacities and photo-generated oxygen vacancies. In this photocatalytic system, the NH3 yield rate can reach above 597 or 992 μmol·gcal−1·h−1 under the vis-light or full-spectrum lighting without any sacrificial additives, and increase at least 3 times compared to the initial materials. The AQE at 420 nm also reaches more than 0.8 %. Furthermore, the RhB degradation efficiency for the modified sample is approximately 90 %, and the kinetic constant significantly exceeds that of initial sample by 2.7 times. It is the photo-introduced h+ and·O2− species working together to further improve the dye degradation process. This research provides a new insight for the fabrication strategy of photo-catalytic N2 fixation materials.

Unrefined and Milled Ilmenite as a Cost-Effective Photocatalyst for UV-Assisted Destruction and Mineralization of PFAS.

Per- and polyfluoroalkyl substances (PFAS) are fluorinated and refractory pollutants that are ubiquitous in industrial wastewater. Photocatalytic destruction of such pollutants with catalysts such as TiO2 and ZnO is an attractive avenue for removal of PFAS, but refined forms of such photocatalysts are expensive. This study, for the first time, utilized milled unrefined raw mineral ilmenite, coupled to UV-C irradiation to achieve mineralization of the two model PFAS compounds perfluorooctanoic acid (PFOA) and perfluoro octane sulfonic acid (PFOS). Results obtained using a bench-scale photocatalytic reactor system demonstrated rapid removal kinetics of PFAS compounds (>90% removal in less than 10 h) in environmentally-relevant concentrations (200-1000 ppb). Raw ilmenite was reused over three consecutive degradation cycles of PFAS, retaining >80% removal efficiency. Analysis of degradation products indicated defluorination and the presence of shorter-chain PFAS intermediates in the initial samples. End samples indicated the disappearance of short-chain PFAS intermediates and further accumulation of fluoride ions, suggesting that original PFAS compounds underwent mineralization due to an oxygen-radical-based photocatalytic destruction mechanism induced by TiO2 present in ilmenite and UV irradiation. The outcome of this study implies that raw ilmenite coupled to UV-C is suitable for cost-effective reactor operation and efficient photocatalytic destruction of PFAS compounds.

Enhancing the photocatalytic efficiency of g-C3N4 for ciprofloxacin degradation using Tetrakis (acetonitrile) copper(I) hexafluorophosphate as a highly effective cocatalyst

Ciprofloxacin antibiotic (CP) is one of the antibiotics with broad-spectrum antimicrobial activity that has the highest rate of antibiotic resistance. This antibiotic undergoes incomplete metabolism within the human body and is excreted into the water, resulting in its hazardous biological and ecotoxicological effects. In this study, a novel photocatalyst, comprised of graphitic carbon nitride (g-CN) and Tetrakis(acetonitrile)copper(I)hexafluorophosphate ([(CH3CN)4Cu]PF6), denoted as CuPF6/g-CN, was employed for the degradation of ciprofloxacin under visible-light irradiation. The Cu complex, functioning as a co-catalyst, assumes a crucial role in facilitating the efficient separation of photogenerated charges and exhibiting high absorption in the visible-light region. More surprisingly, CuPF6/g-CN does surpass by up to 6 times the behavior reached with bare g-CN. The experimental findings indicated that the optimal degradation of ciprofloxacin (CP) occurred after 50 min when using a concentration of 20 mg L−1 CP and a concentration of 0.05 g/L CuPF6/g-CN, under a pH of 8. This research offers valuable insights into the advancement of cost-effective co-catalysts that enhance the photocatalytic capabilities of established photocatalysts. It contributes to improving the overall performance and efficiency of these photocatalytic systems.

Investigation study of methyl violet photodegradation over alginate-carboxymethyl cellulose/titanium(IV) oxide/covalent organic frameworks bio-nanocomposite beads under ultraviolet irradiation

Concerned about water treatment, it is of great importance to present new approaches for improving photocatalytic activity. Since photocatalysis is ubiquitous in almost all chemical manufacturing processes, the development of photocatalytic systems carries significance for our environment. In this regard, three different amounts of covalent organic frameworks decorated with titanium(IV) oxide nanoparticles (TiO2/COF hybrids) in Alginate-Carboxymethyl cellulose (Alg-CMC) blend matrix were prepared under ultrasound irradiation, which Citric acid and Calcium chloride acted as two green cross-linkages. Based on the physio-chemical analyses of these bio-nanocomposite (bio-NC) beads, the Alg-CMC blend polymer appeared to be the best candidate for a disparity of TiO2/COF hybrids. Not only did COF aid to increase the distribution of TiO2 nanoparticles, but it declined the bandgap energies. The resultant Alg-CMC/TiO2/COF (TiO2/COF = 15:6) bio-NC beads demonstrated efficient photodegradation activity towards Methyl violet (MV) under Ultraviolet light. The obtained results of scavenger studies indicated that superoxide radicals and electron agents played a major role in MV degradation. Further investigation confirmed that single oxygen addition and N-de-methylation could be two important pathways for the decomposition of MV by these bio-NC beads.

Heteropoly blue-modified ultrathin bismuth oxychloride nanosheets with oxygen vacancies for efficient photocatalytic nitrogen fixation in pure water

Photocatalytic nitrogen reduction is a promising green technology for ammonia synthesis under mild conditions. However, the poor charge transfer efficiency and weak N2 adsorption/activation capability severely hamper the ammonia production efficiency. In this work, heteropoly blue (r-PW12) nanoparticles are loaded on the surface of ultrathin bismuth oxychloride nanosheets with oxygen vacancies (BiOCl-OVs) by electrostatic self-assembly method, and a series of xr-PW12/BiOCl-OVs heterojunction composites have been prepared. Acting as a robust support, ultrathin two-dimensional (2D) structure of BiOCl-OVs inhibits the aggregation of r-PW12 nanoparticles, enhancing the interfacial contact between r-PW12 and BiOCl. More importantly, the existence of oxygen vacancies (OVs) provides abundant active sites for efficient N2 adsorption and activation. In combination of the enhanced light absorption and promoted photogenerated carriers separation of xr-PW12/BiOCl-OVs heterojunction, under simulated solar light, the optimal 7r-PW12/BiOCl-OVs exhibits an excellent photocatalytic N2 fixation rate of 33.53 µmol g-1h−1 in pure water, without the need of sacrificial agents and co-catalysts. The reaction dynamics is also monitored by in situ FT-IR spectroscopy, and an associative distal pathway is identified. Our study demonstrates that construction of heteropoly blues-based heterojunction is a promising strategy for developing high-performance N2 reduction photocatalysts. It is anticipated that combining of different defects with heteropoly blues of different structures might provide more possibilities for designing highly efficient photocatalysis systems.

Interfacial linkage modulated amorphous molybdenum sulfide/bismuth halide perovskite heterojunction for enhanced visible-light-driven photocatalytic hydrogen evolution

Photocatalytic hydrogen evolution is a promising approach for direct solar-to-fuel conversion. Although significant research efforts have been put on the development of lead-free metal halide perovskites to reach excellent optoelectronic properties, their rational design for efficient heterojunction photocatalytic systems still poses challenges. Here, we report a new strategy to tailor the interface of hybrid tri(dimethylammonium) hexaiodobismuthate (DMA3BiI6) and amorphous molybdenum sulfide (a-MoSx) heterojunctions. Specifically, a-MoSx was prepared with abundant apical S2– or bridging S22– ligands to allow coupling with DMA3BiI6 via an interfacial Mo–S–Bi linkage. The as-obtained heterostructures were found to show an improved visible-light-driven photocatalytic hydrogen evolution in hydroiodic acid splitting under mild conditions reaching a superior hydrogen evolution rate of around 750 µmol g−1 h−1 and an apparent quantum efficiency (AQE) of 13.0 % at 420 nm. The high activity was kept after a long-term performance test for 3 days.

Visible-light driven efficient cleavage of Cα–Cβ bond in lignin models and lignin over porous tubular carbon nitride

The photocatalytic selective breaking of recalcitrant Cα–Cβ bond in real lignin to product value-added chemicals under mild conditions is intriguing but remains challenging. Herein, a sustainable strategy for the efficient and selective breakage of Cα–Cβ bond in lignin β-O-4 model compounds and lignin over porous tubular g-C3N4 (PTCN) photocatalyst was designed under ambient conditions. Compared with bulk g-C3N4, the construction of PTCN not only facilitates photogenerated charge separation and transfer, but also provides more exposed interior active sites, which is conductive to reactant adsorption on the surface of PTCN, thereby resulting in the higher photocatalytic efficiency. With this strategy, 2-phenoxy-1-phenylethanol as the typical model substrate was completely converted into aromatic monomers with Cα–Cβ bond cleavage selectivity of 97.2 %. Both mechanistic studies and theoretical calculations revealed that the photogenerated holes, electrons and O2− respectively played an essential role in the Cβ–H dehydrogenation and Cα–Cβ bond breakage. Native lignin samples (alkaline, pine and wheat straw) were applied to these photocatalytic systems and successfully depolymerized with Cα–Cβ bond cleavage under optimal reaction conditions. This work could provide an in-depth insight into photocatalyst design for the economical and efficient valorization of lignin.