Photocatalytic Performance Research Articles

Synergistic Cu single-atoms and clusters on tubular carbon nitride for efficient photocatalytic performances

Synergistic Cu single-atoms and clusters on tubular carbon nitride for efficient photocatalytic performances

NIR‐Triggered Cu2O/Cu2‐xS Heterostructure as an “All‐In‐One” Functional Nanoplatform for Efficient Synergistic Tumor Therapy

AbstractThe fabrication of synergistic multifunctional anti‐tumor nanoplatforms is challenging due to the urgent requirement to activate different therapeutic modalities. Although the multi‐modal treatments can be achieved by carrying out the activation with different exogenous and endogenous stimulations in sequence, this tedious manner is not applicable to the ideal synergistic cancer treatment. Herein, a simple heterojunction of Cu2O/Cu2‐xS modified with gambogic acid and hyaluronic acid (CCS@GA@HA) is ingeniously fabricated for the synergistic cancer treatment combining photothermal therapy (PTT), photocatalytic therapy (PCT), chemodynamic therapy (CDT) and potential ferroptosis just activated by the single near infrared (NIR) light irradiation. Cu2O/Cu2‐xS heterostructure (CCS) with promoted separation and transfer efficiency of photogenerated charge carriers exhibits excellent photocatalytic performance. The intervention of gambogic acid (GA) downregulates the overexpression of heat shock protein 90 (HSP90), which make it possible to execute the mild PTT. And the CDT performance is efficiently improved by the heat generated from PTT. Specifically, CCS appears to accelerate the accumulation of lipid peroxides (LPO) and inactivate glutathione peroxidase 4 (GPX4) that directly induce ferroptosis. In brief, CCS@GA@HA exhibits prominent NIR‐triggered synergistic effect involving PCT, mild PTT, enhanced CDT and ferroptosis for an effective multi‐modal tumor treatment.

An efficient, green, and magnetic recycling wastewater treatment technique enabled by ZnO/NiFe2O4/BiOBr 3D nanofibers photo-fenton process

A novel magnetic recycling ZnO/NiFe2O4/BiOBr 3D nanofibers photo-Fenton system was successfully prepared by parallel electrospinning combining with solvothermal method. ZnO/NiFe2O4 composite nanofibers was prepared via parallel electrospinning, then ZnO/NiFe2O4/BiOBr 3D nanofibers was obtained by solvothermal growth of BiOBr on electrospun ZnO/NiFe2O4 composite nanofibers. The composition, morphologies, structures and photocatalytic properties of ZnO/NiFe2O4/BiOBr 3D nanofibers were systematically tested and analyzed, and some meaningful results were obtained. The prepared ZnO/NiFe2O4/BiOBr 3D nanofibers, combined with H2O2, form a photo-Fenton system that exhibits excellent photocatalytic performance. When 0.05 mL of H2O2 is added to the photo-Fenton system, the degradation rate of organic dye Rhodamine B (RhB) reaches 99.61 % under light exposure for 10 min. Capture experiments and Electron Spin Resonance (ESR) measurements have confirmed that holes (h+) and hydroxyl radicals (·OH) are the primary active species that play a dominant role in the photocatalytic degradation of Rhodamine B (RhB). Furthermore, the ZnO/NiFe2O4/BiOBr 3D nanofibers have demonstrated exceptional photocatalytic degradation efficiency towards RhB, maintaining a degradation rate of over 95 % even after undergoing three recycling experiments. Significantly, this photo-Fenton system also has good magnetic properties, which can be separated from the treatment system under the applied magnetic field, avoiding secondary pollution of the treatment system, improving reuse rate and saving costs. This study provides valuable insights for the purposeful utilization of the photocatalytic materils.

Harnessing Near-Infrared Light for Highly Efficient Photocatalysis.

Near-infrared (NIR) light, accounting for approximately 50% of solar light, cannot directly excite photocatalytic reactions due to its lower energy, which severely restricts the photocatalytic solar energy conversion efficiency and hinders the application of photocatalysis. To overcome this dilemma, some viable strategies have been proposed to harness NIR light for enhancing photocatalytic performance based on material structure, composition, and function designs, and obvious progresses have been witnessed. In this review, the basic principles and representative advances in photocatalyst heterojunction designs (including p-n junctions, S-scheme, Z-scheme, and type-ІІ heterojunctions), photocatalyst composition and function designs (such as preparing rare earth element doped upconversion photocatalysts, rare earth upconversion photocatalytic hybrids and triplet-triplet annihilation upconversion photocatalytic composites), and photothermal-photocatalytic bifunction designs for NIR light utilization are exclusively scrutinized. Meanwhile, the applications of the above-mentioned NIR responsive photocatalyst composites in energy and environmental fields are summarized. Importantly, the challenges and outlooks in the field of NIR light harnessing for efficient photocatalysis are proposed, which may provide theoretical and experimental guidance to those working in solar energy conversion and utilization and other related fields.

Sustainable nitrogen photofixation: Considerations on the state of the art of non critical carbon materials

AbstractThe achievement of a carbon‐neutral energy economy is nowadays mandatory to face global warming and the current energy crisis. To mitigate the present and future environmental issues, replacing fossil feedstocks with renewable sources is of primary importance, aiming to meet future generations' demands for energy and commodities. In light of this, the revamp of the ammonia synthesis, which today consumes almost 2% of the energy globally produced, gained increasing interest. The ammonia generation by reacting air and water and using sunlight as an inexhaustible source of energy is the closest approach to the ideal situation for zero‐carbon energy and chemical production. To promote solar‐to‐ammonia production, the photocatalyst plays a crucial role. However, for large‐scale implementation and long‐term utilization, the selection of noncritical raw materials in catalyst preparation is central aiming at resource security. In this context, herein are reviewed different strategies developed to improve the photocatalytic performances of carbon‐based materials. The introduction of vacancies and surface doping are discussed as valuable approaches to enhance the photocatalytic activity in the nitrogen fixation reactions, as well as the construction of heterojunctions to finely tune the electronic properties of carbon‐based materials.

Controlling size and distribution of Au nano-particles on C3N4 for high-efficiency photocatalytic hydrogen production.

With advantages such as low cost, high stability, and ease of production, visible light photocatalytic C3N4 with a unique microscopic layered structure holds significant potential for development. However, its hydrogen production efficiency remains low due to the pronounced recombination of photo-generated charge carriers and limited surface reaction sites. Normally, the photocatalytic performance of C3N4 can be enhanced by loading noble metals with surface plasmon resonance. It is worth noting that the size of noble metal nanoparticles has a great influence on photocatalytic performance. In this study, accurate controlling of the size and distribution of Au nanoparticles was achieved on the surface of C3N4 by introducing amino groups to improve photocatalytic performance. Results show that uniformly distributed Au nanoparticles in the range of 2-6nm can be obtained on C3N4 with a remarkable enhancement of hydrogen production efficiency, which is about 114 times the property of pure C3N4. The small-sized and uniformly distributed Au nanoparticles can provide more reaction sites and increase the separation of photo-generated charge carriers, in turn improving Au/NH3-C3N4 photocatalytic hydrogen release rate to 6.85 mmol g-1h-1. This work offers a facile way to enhance photocatalytic performance by controlling the size of metal nanoparticles on C3N4 precisely.

Molten Salt Modulation of Potassium-Nitrogen-Carbon for the Breaking Kinetics Bottleneck of Photocatalytic Overall Water Splitting and Environmental Impact Reduction.

Sluggish interfacial water dissociation and the O2 evolution reaction (OER) kinetics are the main obstacles that limit the photocatalytic overall water-splitting performance. A molten salt modulation of potassium-nitrogen-carbon is herein demonstrated as the formation of highly crystalline potassium-doped poly(triazine imide) (KPTI). The in situ X-ray diffraction patterns and theoretical calculation show that the KCl melt can significantly reduce the free energy for the polycondensation of triazine building blocks owing to the formation of a kinetically stable KPTI. Benefiting from the presence of potassium-carbon-nitrogen moiety, the catalyst not only weakens the excitonic confinement to improve the separation efficiency of photogenerated charge carriers but also enhances the stability of carbon sites by suppressing the undesired C═O formation. Moreover, KPTI accelerates water dissociation by forming interfacial K·H2O clusters with an ordered structure, which supplies sufficient protons for the H2 evolution reaction and lowers the energy barrier to enhance the kinetics of OER. Therefore, a stable photocatalytic overall water-splitting performance can be achieved over KPTI with a stoichiometric generation of products (H2 and O2). Life cycle assessment shows that a carbon-neutral scenario can be achieved on KPTI production in the near term with an increase in green power in the electricity grid.

Ultrafast Charge Transfer in a Core-shell CdS@Cu-TCPP-Pt Heterojunction for Photocatalytic Hydrogen Production Coupled with Selective Benzylamine Oxidation.

Photocatalytic selective oxidation of organic substances coupled with hydrogen production is believed to be one of the most favorable pathways to make full use of photogenerated charge carriers. However, this catalytic reaction is often discouraged due to the rapid recombination of photogenerated carriers in practical applications. In this work, a core-shell CdS@Cu-TCPP-Pt nanorod heterojunction was dexterously designed for boosting the photocatalytic dehydrogenation performance of benzylamine. The transient absorption results revealed that the photogenerated electron-holes could be effectively separated by properly matching the energy levels in CdS@Cu-TCPP. Surprisingly, Pt embedded in Cu-TCPP not only provided abundant hydrogen production active sites but also facilitated ultrafast charge transfer, which endowed CdS@Cu-TCPP-Pt with remarkable photocatalytic performances for the coproductions of N-benzylidenebenzylamine (1 mL) with a conversion of 23.48% and H2 (20.75 mmol g-1 h-1) under visible irradiation, far surpassing those of CdS and Cu-TCPP. Obviously, the present work verifies that designing and fabricating a hybrid photocatalyst with high separation efficiency of electron-hole pairs is also a significant avenue for other high-performance cooperative dual-functional photocatalytic reactions.

Enhancement Study of the Photoactivity of TiO2 Photocatalysts during the Increase of the WO3 Ratio in the Presence of Ag Metal

Nanocomposites (NCs) consisting of 4%Ag/x%WO3/TiO2, with varied concentrations (x = 1, 3, 5, 7 wt.%) of WO3, were successfully synthesized using the sol-gel process to examine their photocatalytic performance. The synthesized 4%Ag/x%WO3/TiO2 nanopowder was characterized using X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV–vis diffuse reflectance spectra (UV–vis DRS), photoluminescence (PL), and Brunauer–Emmett–Teller (BET) surface area analysis to elucidate its physicochemical properties. The photocatalytic evaluation revealed that the Ag/1%WO3/TiO2 nanocomposite exhibits 98% photoreduction efficiency for Cr(VI) after 2 h under visible light due to the impact of the plasmonic effect of Ag atoms. In addition, the Ag/4%WO3/TiO2 shows about 95% photooxidation efficiency for methylene blue (MB) dye after 4 h.

Probing morphology-dependent PDI/g-C3N4 heterostructures for co-production of H2O2 and 2,5-diformylfuran

Perylene diimide/Carbon nitride (PDI/CN) is an excellent photocatalyst consisting of self-assembled PDI with a π-π stacking structure, and has wide applications. But the effect of PDI morphology over their photocatalytic performance has been scarcely investigated. Herein, we successfully synthesized three different morphologies of PDI, inducement formed by different organic solvents, and coupled them with CN, respectively. For simultaneous production of H2O2 and DFF, their photocatalytic activity has the order of PDI-F/CN > PDI-S/CN > PDI-B/CN. H-stacked PDI-F/CN exhibits good crystallinity, larger specific surface area, higher π-conjugation and large dipole moment, which could improve charge-carrier separation, and its activity was 4.2-fold higher than that of CN. Theoretical calculation results indicated that the PDI-F/CN heterojunction could benefit the adsorption of O2 and 5-HMF and lower the energy barrier, which is an important factor for the enhanced photocatalytic activity. This work provides a new and excellent photocatalyst for biomass oxidation.

PEDOT: PSS Doped Activated Biochar as a Novel Composite Material for Photocatalytic and Efficient Energy Storage Application

Herein, we report the synthesis of activated biochar from green algae and the effect of its doping on the structural, photocatalytic, and energy storage properties of PEDOT-PSS. The morphology of pure and doped samples was investigated with Fourier Transform Infrared Spectroscopy (FTIR), Atomic Force Microscopy (AFM), Brunauer–Emmett–Teller (BET) analysis, and thermogravimetric analysis (TGA). AFM results for PEDOT-PSS@6wt.% of BC indicate that the calculated average peak height, particle size, and roughness were 283 nm, 136 nm, and 71 nm, respectively. Adding biochar to PEDOT-PSS significantly improved the thermal stability of PEDOT-PSS up to 550 °C. The novel photocatalyst PEDOT-PSS@6wt.% BC improved photocatalytic performance by approximately 17% in Methylene Blue (MB) dye removal. The electrochemical performance in terms of supercapacitors for the synthesized samples was investigated using cyclic voltammetry (CV), galvanostatic charge–discharge (GCD), specific capacitance, stability, and electrochemical impedance spectra (EIS). PEDOT-PSS@6wt.% of BC as a novel electrode material in supercapacitors exhibits an initial specific capacitance of 1300 Fg−1. Moreover, the PEDOT-PSS@6wt.% of BC electrode shows excellent stability up to 1000 cycles of operation. The EIS studies suggest the presence of charge transfer resistance. Considering the economical biosynthesis and multifunctional features, the PEDOT-PSS@6wt.% of BC could potentially be used as a photocatalyst to remove organic dyes and supercapacitors in energy storage applications.

Facile ultrasound-assisted synthesis of g-C3N4@Bi20TiO32/Bi2O2CO3 heterojunction with high photocatalytic performance for resistant-biodegradable dye

In this study, g-C3N4/Bi20TiO32/Bi2O2CO3 photocatalyst structured as a heterojunction was fabricated by an ultrasound-assisted methodology. It evaluated the activity in photocatalytic processes of g-C3N4/Bi20TiO32/Bi2O2CO3 composite material through simulated visible light-induced Rhodamine B photodegradation, demonstrating photodegradation efficiencies 5.6 and 13.84 times exceeding that of pure g-C3N4 and Bi20TiO32/Bi2O2CO3 in turn. Due to the formation of a ternary heterojunction, the g-C3N4/Bi20TiO32/Bi2O2CO3 composite material has a stronger visible light absorption capability compared to pure g-C3N4 and Bi20TiO32/Bi2O2CO3. The photocurrent density is also significantly increased (0.156 μA/cm2). The catalyst's efficiency remained a high degradation ratio (over 95 %) after five cycles, showing the composite's sustainable stability. In summary, based on its excellent performance, the ternary composite photocatalyst g-C3N4/Bi20TiO32/Bi2O2CO3 exhibits great potential for photodegradation of non-biodegradable dye.

Photocatalytic Degradation of Levofloxacin and Inactivation of Enterococci Levofloxacin-Resistant Bacteria Using Pure Rare-Earth Oxides

In this study, La2O3 and CeO2 nanopowders were prepared using a simple and cost-effective precipitation method. Wide-angle X-ray diffraction (WAXD), UV-Visible reflectance diffuses (UV-Vis DRS), Raman spectroscopy, and specific surface area were used to characterize the photocatalysts, evidencing that the used preparation method was effective in the generation of crystalline CeO2 and La2O3. In particular, WAXD results showed that the average crystallite size of the achieved La2O3 and CeO2 samples were about 22 nm and 28 nm, respectively. The photocatalytic performances of the prepared catalysts were investigated in the degradation of levofloxacin (LEV) and the inactivation of a waterborne pathogen levofloxacin resistant (Enterococcus faecalis ATCC 29212) by using a photoreactor equipped with a solar simulator (SS). After 120 min, the CeO2 and La2O3 photocatalytic treatments allowed us to achieve between 75% and 83% of levofloxacin removal, respectively. A complete removal of 106 CFU/mL Enterococcus faecalis ATCC 29212 was achieved after 5 and 60 min of La2O3 and CeO2 photocatalytic processes, respectively.

Construction of C3N4/Ag2S p-n semiconductor heterojunction coupled with Ag-induced SPR effect on CF cloth for improving photocatalytic activity

C3N4/Ag2S p-n semiconductor heterojunction coupled with Ag-induced SPR effect on carbon fiber cloth with large macroscopic area, recyclability and excellent photocatalytic performance was prepared by thermal condensation-chemical precipitation. CF/C3N4/Ag/Ag2S cloth showed strong Vis-NIR light absorption and outstanding separation efficiency of photo-generated electron and hole pairs. CF/C3N4/Ag/Ag2S cloth displayed a markedly enhanced catalytic activity (94 % of TC, 85 % of Cr(VI)) compared with CF/C3N4 cloth (52 % of TC, 50 % of Cr(VI)) or CF/Ag/Ag2S cloth (34 % of TC, 19 % of Cr(VI)), attributing to the establishment of p-n junction along with Ag SPR effect. Moreover, degradation pathways for TC were proposed utilizing HPLC-MS and Fukui index analysis, and photocatalytic mechanism was confirmed by active species experiments and DFT computations. This facile strategy provides novel approach to the synthesis of material with large macroscopic areas, recyclability, and excellent photocatalytic property for degrading contaminants from wastewater.

Orientation-Dependent Photocatalysis of Imine-Linked Covalent Organic Frameworks Based on Thienothiophenes for Oxidation of Amines to Imines.

Toward visible light photocatalysis, covalent organic frameworks (COFs) have recently garnered growing attention. The effect of different orientations of imine of imine-linked COFs on photocatalysis should be elucidated. Here, two COFs are developed with 2,5-diphenylthieno[3,2-b]thiophene (DPTT) and 1,3,6,8-tetraphenylpyrene (Py) linked by imine, affording DPTT-Py-COF and Py-DPTT-COF, respectively. Distinctly, DPTT-Py-COF and Py-DPTT-COF have high crystallinity and porosity, paving the way to highly efficient photocatalysis. Theoretical calculations demonstrate that both DPTT-Py-COF and Py-DPTT-COF are of similar bandgaps but of varied energy positions due to the different orientations of imine. Besides, characterizations disclose that DPTT-Py-COF delivers more enhanced charge separation and transfer than Py-DPTT-COF. Probed by the oxidation of amine to imine, DPTT-Py-COF exhibits a blue light photocatalytic performance superior to that of Py-DPTT-COF. DPTT-Py-COF, a highly recyclable photocatalyst, enables the oxidation of various amines to imines with oxygen. This work highlights that tuning the microenvironment of COFs unravels tenable performances in photocatalysis.

Enhancement of photocatalytic degradation of ciprofloxacin via constructing conductive matrix

The application of heterogeneous photocatalysts is severely limited by the high charge transfer resistance (Rct). BiVO4/g-C3N4 photocatalysts were prepared and loaded on the conductive matrix material carbon paper (CP) to reduce electron transfer resistance and improve the photocatalytic performance. The Rct of BiVO4/g-C3N4@CP was remarkedly reduced by 94.3 % compared to the photocatalysts on the oil paper (BiVO4/g-C3N4@OP), while the photocurrent density increased by 5.5 times. The utilization efficiency of light energy and separation of photoelectrons and holes were improved with CP due to its ability to facilitate long-distance transfer of photoelectrons. Consequently, the photocatalytic degradation performance of BiVO4/g-C3N4@CP was enhanced by a 26.1 % improvement in ciprofloxacin (CIP) degradation efficiency. Quenching experiment, LC-MS analysis and DFT calculation revealed that piperazine ring opening and C-F cleavage were the major pathways for CIP degradation with BiVO4/g-C3N4@CP.

A Reactor based on P‐N Heterojunction of Polypyrrole and Porous Silicon for Photocatalytic and Electro‐assisted Photocatalytic Performance

AbstractIn this work, a photoelectrochemical reactor with an anode based on hybrid structure between conducting polymer polypyrrole (PPy) and porous silicon (PSi) was fabricated and utilized to evaluate the photocatalysis and electro‐assisted photocatalysis for degradation of rhodamine B (RhB) solution. The PSi was made of n‐type silicon single‐crystal wafer by the metal‐assisted chemical etching (MACE). The anode PPy/PSi formed following a polymerization of the PPy on the PSi from the vapour‐phase route using oxidant FeCl3. Typical material characterizations of the PPy, PSi and PPy/PSi were investigated via scanning electron microscope (SEM), and spectroscopies of Fourier‐transform infrared (FTIR), Raman scattering and UV‐vis. Under visible light radiation (halogen light with the wavelength region of 400–700 nm), photocatalytic and electro‐assisted photocatalytic processes of the reactor were conducted by degradation of the RhB solution. A heterojunction (p‐n) of the PPy/PSi was proposed to explain the efficient catalytic performance of the reactor.

Ag2Se nanoparticles anchored on S-g-C3N4 nanosheets towards efficient photocatalytic tetracycline hydrochloride removal and H2 generation

To improve the stability of Ag based co-catalysts and to increase the photocatalytic performance of graphitic carbon nitride (g-C3N4), Ag2Se nanoparticles were grown onto superior thin sulfur-doped g-C3N4 nanosheets which was fabricated via two-step thermal polymerization at high temperature. Ultrathin S-doped g-C3N4 nanosheets were prepared via two-step thermal polymerization using melamine and thiourea. The ratios of Ag2Se were adjusted to fabricate a series of Ag2Se/S-g-C3N4 (Ag2Se/SCN) composite samples by controlled solvothermal synthesis. S-doping plays an important role in mono-dispersion of Ag2Se nanoparticles on S-g-C3N4 nanosheets because of the control of growth sites. The photocatalytic removal of tetracycline hydrochloride test indicates that sample Ag2Se/SCN-3 with Ag2Se loading of 3 % reveals the best removal effect, in which tetracycline hydrochloride of 60 % is removed within 60 min. Photocatalytic hydrogen generation test results without co-catalyst addition demonstrate that sample Ag2Se/SCN-3 exhibits the best H2 evolution rate of 2116.35 μmol·g−1·h−1, which is 3.8 times of that of pure carbon nitride. The photocatalytic mechanism tests suggest that Schottky heterojunctions are formed in the Ag2Se/S-g-C3N4 composites. The formation of Schottky heterojunctions improved the separation efficiency of photogenerated charge carriers. The incorporation of Ag2Se nanoparticles (as the co-catalyst) on S-g-C3N4 nanosheets is the key for drastically improving the photocatalytic performance and eliminating the use of Pt co-catalyst during the photocatalytic processes.

Synergistic enhancement of plasmon induced photocatalytic and photoelectrochemical performance on ZnWO4/Ag2O@Ag hybrid-heterostructures

A novel hybrid photocatalyst, ZnWO4/Ag2O@Ag heterostructure was synthesized using a simple one-pot microwave treatment with varying concentrations of silver. Physico-chemical characterization was performed to elucidate the synthesized nanohybrids' properties. The photocatalytic activity of both pristine and heterostructure samples was evaluated through the degradation of cationic MB dye. Among the varied Ag concentrations, the 9 % Ag-doped ZnWO4/Ag2O heterostructure exhibited superior degradation performance, with a degradation rate of 93 % achieved within 45 min, surpassing both other Ag concentrations (89 % (90 min) for 1 % Ag, 87 % (80 min) for 3 % Ag, 90 % (80 min) for 5 % Ag and 91 % (45 min) for 7 % Ag) and pristine ZnWO4 (91 % (90 min)) samples. This catalytic enhancement can be attributed to the formation of heterostructures, plasmon-induced absorption enhancement within specific wavelength ranges, and reduced charge recombination rates. UV–visible studies revealed Ag nanoparticles of various sizes in the heterostructures, supported by surface plasmon resonance (SPR) peaks at 480 and 550 nm, respectively. Trapping experiments indicated that •OH and •O2− were the active species in MB reduction for pure and heterostructure samples. Furthermore, the hybrid heterostructure samples exhibited high stability and reusability in photocatalytic degradation. These findings suggest that the ZnWO4/Ag2O heterostructure photocatalysts are promising candidates for environmental remediation applications.

Built-in electric field mediated S-scheme high-quality charge separation in BiVO4/NiAl-LDH heterojunction for highly efficient photocatalytic degradation of antibiotics

As an up and coming technology for antibiotics removal from water, photocatalysis required well-pleasing charge isolation, migration, and utilization efficiency to come true an efficaciously photocatalytic performance, but developing affordable and high-efficiency photocatalyst remains a great challenging. Herein, an emerging S-scheme BiVO4/NiAl-LDH heterojunction was ingeniously fabricated by mulberry-like BiVO4 microrods immobilized onto the surfaces of flower-like NiAl-LDH microspheres. The physicochemical properties of the BiVO4/NiAl-LDH heterojunctions were analyzed by multiple techniques. Expectedly, the manufactured BiVO4/NiAl-LDH heterojunction endowed a significantly strengthened removal rate of tetracycline compared to mono-component BiVO4 and NiAl-LDH under visible light. Specifically, the optimized BVO-NAL-3 manifested the exceptional tetracycline removal efficiency with an apparent rate constant of up to 0.0409 min−1, which was close to 34.1 and 4.4 times more rapid than those of neat NiAl-LDH and BiVO4, severally. This signal enhancement was centrally related to the creation of S-scheme heterojunction, which accelerated high-quality charge separation and strengthened redox capacity under the force of created a built-in electric field, which was corroborated by experiments results together with density functional theory calculations. Besides, the generation of superoxide radicals and photogenerated holes played an imperative role in the tetracycline degradation over BVO-NAL-3. Noteworthily, BVO-NAL-3 expressed the satisfactory stability and exceptional resistance to environmental interferences. More amazingly, other refractory antibiotics including ciprofloxacin, levofloxacin and amoxicillin were also efficaciously eliminated by BVO-NAL-3. Ultimately, the possible degradation mechanism and pathways of tetracycline were logically inferred. This work unveils a valuable afflatus for the reasonable layout and establishment of S-scheme heterojunction with high-quality charge separation for the eradication of antibiotics.