Photoactive Complexes Research Articles

Exploring the Photophysics and Photocatalytic Activity of Heteroleptic Rh(III) Transition-Metal Complexes Using High-Throughput Experimentation.

High-throughput synthesis and screening (HTSS) methods were used to investigate the photophysical properties of 576 heteroleptic Rh(III) transition-metal complexes through measurement of the UV-visible absorption spectra, deaerated excited-state lifetime, and phosphorescent emission spectra. While 4d transition-metal photophysics are often highly influenced by deleterious metal-centered deactivation channels, the HTSS of structurally diverse cyclometalating and ancillary ligands attached to the metal center facilitated the discovery of photoactive complexes exhibiting long-lived charge-transfer phosphorescence (0.15-0.95 μs) spanning a substantial portion of the visible region (546-620 nm) at room temperature. Further photophysical and electrochemical investigations were then carried out on select complexes with favorable photophysics to understand the underlying features controlling these superior properties. Heteroleptic Ir(III) complexes with identical ligand morphology were also synthesized to compare these features to this family of well understood chromophores. A number of these Rh(III) complexes contained the requisite properties for photocatalytic activity and were consequently tested as photocatalysts (PCs) in a water reduction system using a Pd water reduction cocatalyst. Under certain conditions, the activity of the Rh(III) PC actually surpassed that of the Ir(III) PC, uncovering the potential of this often-overlooked class of transition metals as both efficient photoactive chromophores and PCs.

Iron Photocatalysis Applied to Oxidative Amidation of Aldehydes with NaCl

AbstractA synthesis of amides from aldehydes promoted by the photoactive complex of Fe2SO4 with 2‐picolinic acid, NaCl as a chlorine source, and Na2S2O8 as a benign oxidant is reported. The reaction is mediated by visible light and is carried out at room temperature in the absence of additives. Fe2SO4 is a readily available earth‐abundant metal (EAMs) salt, which does not need to be prepared and is environmentally sustainable. Both aliphatic and aromatic aldehydes and mono‐ and disubstituted amines have been investigated for this transformation. This study opens intriguing perspectives for extending the application of photoactive complex iron salts toward halogenation processes as well as for C−H activation reactions and contributes to the field of earth‐abundant metal based catalysis.

Optical Control over Liquid–Liquid Phase Separation

Liquid-liquid phase separation (LLPS) is responsible for the emergence of intracellular membrane-less organelles and the development of coacervate protocells. Benefitting from the advantages of simplicity, precision, programmability, and noninvasiveness, light has become an effective tool to regulate the assembly dynamics of LLPS, and mediate various biochemical processes associated with LLPS. In this review, recent advances in optically controlling membrane-less organelles within living organisms are summarized, thereby modulating a series of biological processes including irreversible protein aggregation pathologies, transcription activation, metabolic flux, genomic rearrangements, and enzymatic reactions. Among these, the intracellular systems (i.e., optoDroplet, Corelet, PixELL, CasDrop, and other optogenetic systems) that enable the photo-mediated control over biomolecular condensation are highlighted. The design of photoactive complex coacervate protocells in laboratory settings by utilizing photochromic molecules such as azobenzene and diarylethene is further discussed. This review is expected to provide in-depth insights into phase separation-associated biochemical processes, bio-metabolism, and diseases.

Vitamin B12 in Photocatalysis - An Underexplored Frontier in Cooperative Catalysis.

Vitamin B12 (VB12) is a flexible and sustainable catalyst both in nature and the reaction flask, facilitating varied organic transformations of high value to both enzymatic processes and synthetic chemists. Key to this value is the breadth of reactivity it possesses, capable of both ionic, 2 electron chemistry, and radical, 1 electron chemistry. In particular, the ability to generate carbon-centered radical intermediates via photolysis of organocobalt intermediates formed from alkyl electrophiles opens the door to powerful new radical transformations challenging to achieve using classical photoredox or ligand-to-metal charge transfer (LMCT) catalysis. While this unique photocatalytic reactivity of VB12 has been increasingly leveraged in monocatalytic schemes, recent reports have demonstrated VB12 is able to function as the photocatalytic component in cooperative schemes, driving diverse reactivity including remote elimination of alkyl halides, regioselective epoxide arylation, and regioselective epoxide reduction. This concept briefly overviews the enabling photochemical properties of VB12 and recent applications in cooperative catalysis, providing a framework for the continued development of new cooperative catalyst systems using this powerful photoactive complex.

Evaluation of the efficiency of intersystem crossing to a triplet state of fullerene in complexes with amino acids

The important photophysical process that determines the efficiency of photosensitizers is saturation of a triplet state by intersystem crossing during light absorption. In the present work, C60 fullerene complexes with amino acids glycine, lysine, methionine and threonine were studied as promising photosensitizers. All these complexes, for which the calculations were done, demonstrate high values of rate constants of transition to triplet states and a high probability of the ability to generate reactive oxygen species through excitation in the visible spectrum. The carboxyl groups of amino acids that are not involved in electronic excitation can be used as the component of specific DNA aptamers for conjugation to photoactive complexes for a tumor-targeting drug delivery system.

Sunshine and a pinch of tropical soils: A natural, low-cost photo-Fenton variation for safer water, assisted by H2O2 or percabonate

Clean water is essential for human survival, but access to safe drinking water remains a challenge in resource-limited regions. Herein, we explored a low-cost but effective solution for water potabilization using natural iron sources from soils along with sunlight to remove coliforms from water. We evaluated 30 soil samples from tropical regions and among them, we found that soils from Colombia and Cameroon with high clay content and low carbon levels were the most effective catalysts. Their combination with H2O2 enhanced the solar disinfection (SODIS) yield and induced a heterogeneous photo-Fenton process with secondary homogeneous contribution and/or photocatalytic action. We also found that storing soils in acidic conditions increased the concentration of soluble iron species, leading to enhanced E. coli removal due to homogeneous Fenton and Fenton-like processes. The addition of citrate as a ligand further improved the performance of the system, by facilitating the regeneration of dissolved iron, through metal chelation, thanks to the formation of photo-active complexes. Moreover, we explored the possibility of using sodium percarbonate as a substitute for H2O2 and found it to be a successful alternative, even over alkaline lake water samples. We discuss the mechanism behind the improved activity of sodium percarbonate and suggest that ferruginous soils, when combined with any form of H2O2, can induce the photo-Fenton process over a wide pH range and at low mg/L concentrations. Our study provides valuable insights into the potential of using natural iron sources to enhance solar disinfection, making clean water more accessible to communities in need.

The Nephelauxetic Effect Becomes an Important Design Factor for Photoactive First‐Row Transition Metal Complexes

AbstractThe expansion of d‐orbitals as a result of metal‐ligand bond covalence, the so‐called nephelauxetic effect, is a well‐established concept of coordination chemistry, yet its importance for the design of new photoactive complexes based on first‐row transition metals is only beginning to be recognized. Until recently, much focus has been on optimizing the ligand field strength, coordination geometries, and molecular rigidity, but now it becomes evident that the nephelauxetic effect can be a game changer regarding the photophysical properties of 3d metal complexes in solution at room temperature. In CrIII and MnIV complexes with the d3 valence electron configuration, the nephelauxetic effect was exploited to shift the well‐known ruby‐like red luminescence to the near‐infrared spectral region. In FeII and CoIII complexes with the low‐spin d6 electron configuration, charge‐transfer excited states were stabilized with respect to detrimental metal‐centered excited states, to improve their properties and to enhance their application potential. In isoelectronic (3d6) isocyanide complexes of Cr0 and MnI, the nephelauxetic effect is likely at play as well, enabling luminescence and other favorable photoreactivity. This minireview illustrates the broad applicability of the nephelauxetic effect in tailoring the photophysical and photochemical properties of new coordination compounds made from abundant first‐row transition metals.

The Nephelauxetic Effect Becomes an Important Design Factor for Photoactive First-Row Transition Metal Complexes.

The expansion of d-orbitals as a result of metal-ligand bond covalence, the so-called nephelauxetic effect, is a well-established concept of coordination chemistry, yet its importance for the design of new photoactive complexes based on first-row transition metals is only beginning to be recognized. Until recently, much focus has been on optimizing the ligand field strength, coordination geometries, and molecular rigidity, but now it becomes evident that the nephelauxetic effect can be a game changer regarding the photophysical properties of 3d metal complexes in solution at room temperature. In CrIII and MnIV complexes with the d3 valence electron configuration, the nephelauxetic effect was exploited to shift the well-known ruby-like red luminescence to the near-infrared spectral region. In FeII and CoIII complexes with the low-spin d6 electron configuration, charge-transfer excited states were stabilized with respect to detrimental metal-centered excited states, to improve their properties and to enhance their application potential. In isoelectronic (3d6 ) isocyanide complexes of Cr0 and MnI , the nephelauxetic effect is likely at play as well, enabling luminescence and other favorable photoreactivity. This minireview illustrates the broad applicability of the nephelauxetic effect in tailoring the photophysical and photochemical properties of new coordination compounds made from abundant first-row transition metals.

Iron Photoredox Catalysis-Past, Present, and Future.

Photoredox catalysis of organic reactions driven by iron has attracted substantial attention throughout recent years, due to potential environmental and economic benefits. In this Perspective, three major strategies were identified that have been employed to date to achieve reactivities comparable to the successful noble metal photoredox catalysis: (1) Direct replacement of a noble metal center by iron in archetypal polypyridyl complexes, resulting in a metal-centered photofunctional state. (2) In situ generation of photoactive complexes by substrate coordination where the reactions are driven via intramolecular electron transfer involving charge-transfer states, for example, through visible-light-induced homolysis. (3) Improving the excited-state lifetimes and redox potentials of the charge-transfer states of iron complexes through new ligand design. We seek to give an overview and evaluation of recent developments in this rapidly growing field and, at the same time, provide an outlook on the future of iron-based photoredox catalysis.

Quantum Yield of DNA Strand Breaks under Photoexcitation of a Molecular Ruby.

Photodynamic therapy (PDT) used for treating cancer relies on the generation of highly reactive oxygen species, for example, singlet oxygen 1 O2 , by light-induced excitation of a photosensitizer (PS) in the presence of molecular oxygen, inducing DNA damage in close proximity of the PS. Although many precious metal complexes have been explored as PS for PDT and received clinical approval, only recently, the potential of photoactive complexes of non-noble metals as PS has been discovered. Using the DNA origami technology that can absolutely quantify DNA strand break cross sections, we assessed the potential of the luminescent transition metal complex [Cr(ddpd)2 ]3+ (ddpd=N,N'-dimethyl-N,N'-dipyridine-2-ylpyridine-2,6-diamine) to damage DNA in an air-saturated aqueous environment upon UV/Vis illumination. The quantum yield for strand breakage, that is, the ratio of DNA strand breaks to the number of absorbed photons, was determined to 1-4 %, indicating efficient transformation of photons into DNA strand breaks by [Cr(ddpd)2 ]3+ .

Janus-type emission from a cyclometalated iron(iii) complex

Although iron is a dream candidate to substitute noble metals in photoactive complexes, realization of emissive and photoactive iron compounds is demanding due to the fast deactivation of their charge-transfer states. Emissive iron compounds are scarce and dual emission has not been observed before. Here we report the FeIII complex [Fe(ImP)2][PF6] (HImP = 1,1′-(1,3-phenylene)bis(3-methyl-1-imidazol-2-ylidene)), showing a Janus-type dual emission from ligand-to-metal charge transfer (LMCT)- and metal-to-ligand charge transfer (MLCT)-dominated states. This behaviour is achieved by a ligand design that combines four N-heterocyclic carbenes with two cyclometalating aryl units. The low-lying π* levels of the cyclometalating units lead to energetically accessible MLCT states that cannot evolve into LMCT states. With a lifetime of 4.6 ns, the strongly reducing and oxidizing MLCT-dominated state can initiate electron transfer reactions, which could constitute a basis for future applications of iron in photoredox catalysis.

Deep‐Red Luminescent Molybdenum(0) Complexes with Bi‐ and Tridentate Isocyanide Chelate Ligands

AbstractIn octahedral complexes, molybdenum(0) has the same 4d6 valence electron configuration as ruthenium(II), which is beneficial for establishing energetically low‐lying metal‐to‐ligand charge transfer (MLCT) excited states. Those MLCT states often show luminescence, and they can furthermore undergo photoinduced electron and energy transfer reactions that are of interest in the context of solar energy conversion, sensing, or photocatalysis. Molybdenum is roughly 100 times more abundant than ruthenium, and it seems desirable to increase our fundamental understanding of the photophysical properties of complexes made from non‐precious metals. We report here on the luminescence behavior of two new homoleptic molybdenum(0) isocyanide complexes, one with three bidentate, the other with two tridentate chelate ligands. The key novelty is the incorporation of thiophene units into the ligand backbones, causing strongly red‐shifted photoluminescence with respect to comparable molybdenum(0) isocyanides with phenylene units in the ligand backbones. Combined experimental and computational studies provide detailed insight into the photophysical properties of this compound class. This work is relevant for the development of new luminescent compounds with possible applications in lighting and sensing, and it complements current research efforts on photoactive complexes with other abundant transition metal and main group elements.

Photoactive Fe Catalyst for Light-Triggered Alkyd Paint Curing.

Herein, we show that the photoactive complexes [(Cp)Fe(arene)]+ (Cp = cyclopentadienyl; arene = C6H6, C6H5Me) act as latent catalysts that allow for photochemical control over the onset of alkyd paint curing, without the need for antiskinning agents such as the volatile 2-butanone oxime normally used to prevent curing during paint storage. The highly soluble neutral complexes [(Cp)Fe(Ch)] and [(Cp)Fe(Ch′)] (Ch = cyclohexadienyl, Ch′ = methylcyclohexadienyl) readily convert to the photoactive complexes [(Cp)Fe(arene)]+ upon oxidation in alkyd, allowing the latter to be dosed in a wide range of concentrations. Infrared and Raman studies show similar spectral changes of the alkyd paint matrix as have been observed in alkyd curing mediated by well-known, industrially applied cobalt- and manganese-based catalyst Co(neodecanoate)2 and [(Me3TACN)2Mn2(μ-OOCR)3](OOCR). The [(Cp)Fe(Ch)]/[(Cp)Fe(arene)]+ system performs equally well as these cobalt- and manganese-based catalysts in terms of drying time and outperform the manganese catalyst by showing a hardness development (increase) similar to that of the cobalt-based catalyst. Based on electron paramagnetic resonance and light–activity studies, we propose that photolysis of [(Cp)Fe(arene)]+ generates short-lived active FeII species, explaining the desired latency. The [(Cp)Fe(Ch)]/[(Cp)Fe(arene)]+ alkyd curing systems presented herein are unique examples of intrinsically latent paint curing catalysts that (1) are based on an abundant and harmless transition metal (Fe), (2) do not require any antiskinning agents, and (3) show favorable performance in terms of drying times and hardness development.

Aerobic Oxidative EDA Catalysis: Synthesis of Tetrahydroquinolines Using an Organocatalytic EDA Active Acceptor.

A catalytic electron donor–acceptor (EDA) complex for the visible-light-driven annulation reaction between activated alkenes and N,N-substituted dialkyl anilines is reported. The key photoactive complex is formed in situ between dialkylated anilines as donors and 1,2-dibenzoylethylene as a catalytic acceptor. The catalytic acceptor is regenerated by aerobic oxidation. Investigations into the mechanism are provided, revealing a rare example of a catalytic acceptor in photoactive EDA complexes that can give access to selective functionalization of aromatic amines under mild photochemical conditions.

Development of heterogeneous photocatalysts via the covalent grafting of metal complexes on various solid supports.

To date, remarkable progress has been achieved in the development of photocatalysts owing to their high activity, selectivity, and tunable light absorption in the visible light range. Recently, heterogeneous photocatalytic systems have emerged as potential candidates due to their beneficial attributes (e.g., high surface area, ease of functionalization and facile separation). Herein, we provide a concise overview of the rational design of heterogeneous photocatalysts by grafting photoactive complexes on heterogeneous support matrices via covalent grafting and their detailed characterization techniques, which have been followed by the landmark examples of their applications. Also, major challenges and opportunities in the forthcoming progress of these appealing areas are emphasised.

Development of a Novel Nanoarchitecture of the Robust Photosystem I from a Volcanic Microalga Cyanidioschyzon merolae on Single Layer Graphene for Improved Photocurrent Generation.

Here, we report the development of a novel photoactive biomolecular nanoarchitecture based on the genetically engineered extremophilic photosystem I (PSI) biophotocatalyst interfaced with a single layer graphene via pyrene-nitrilotriacetic acid self-assembled monolayer (SAM). For the oriented and stable immobilization of the PSI biophotocatalyst, an His6-tag was genetically engineered at the N-terminus of the stromal PsaD subunit of PSI, allowing for the preferential binding of this photoactive complex with its reducing side towards the graphene monolayer. This approach yielded a novel robust and ordered nanoarchitecture designed to generate an efficient direct electron transfer pathway between graphene, the metal redox center in the organic SAM and the photo-oxidized PSI biocatalyst. The nanosystem yielded an overall current output of 16.5 µA·cm−2 for the nickel- and 17.3 µA·cm−2 for the cobalt-based nanoassemblies, and was stable for at least 1 h of continuous standard illumination. The novel green nanosystem described in this work carries the high potential for future applications due to its robustness, highly ordered and simple architecture characterized by the high biophotocatalyst loading as well as simplicity of manufacturing.

A photoactive iridium(III) complex with 3-methyl-2-phenyl pyridine and 1,1-bis(diphenylphosphino)methane: Synthesis, structural characterization and cytotoxicity in breast cancer cells

A photoactive complex [Ir(3m-ppy)2(dppm)Cl] (1; dppm = bis(diphenylphosphino)methane, 3 m-Hppy = 3-methyl-2-phenylpyridine), which shows a green luminescence band at 517 nm in DMSO was synthesized from reaction of the dimeric [Ir2(3m-ppy)4Cl2] with dppm under an inert atmosphere. Complex 1 was characterized by 1H NMR, FT-IR, ESI-MS spectroscopies and CHN analysis. Single-crystal X-ray analysis of 1 revealed a distorted octahedral geometry comprising an IrIII center with monodentate dppm, bidentate-C,N 3 m-ppy and chlorido ligands. The electrochemistry of 1 was studied by cyclic voltammetry in 0.1 M NaClO4 in acetonitrile on a glassy carbon working electrode, displaying an oxidation peak of IrIII/IV at 1.2 V. Complex 1 showed anticancer activity against MDA-MB-231, MCF-7 and HCC1937 cell lines of human breast cancer; the respective cytotoxicity factors of 160, 32 and 25 were significantly greater than the cytotoxicity factors obtained with cisplatin.

Monofunctional Platinum(II) Anticancer Agents.

Platinum-based anticancer drugs represented by cisplatin play important roles in the treatment of various solid tumors. However, their applications are largely compromised by drug resistance and side effects. Much effort has been made to circumvent the drug resistance and general toxicity of these drugs. Among multifarious designs, monofunctional platinum(II) complexes with a general formula of [Pt(3A)Cl]+ (A: Ammonia or amine) stand out as a class of “non-traditional” anticancer agents hopeful to overcome the defects of current platinum drugs. This review aims to summarize the development of monofunctional platinum(II) complexes in recent years. They are classified into four categories: fluorescent complexes, photoactive complexes, targeted complexes, and miscellaneous complexes. The intention behind the designs is either to visualize the cellular distribution, or to reduce the side effects, or to improve the tumor selectivity, or inhibit the cancer cells through non-DNA targets. The information provided by this review may inspire researchers to conceive more innovative complexes with potent efficacy to shake off the drawbacks of platinum anticancer drugs.

A Photorobust Mo(0) Complex Mimicking [Os(2,2'-bipyridine)3]2+ and Its Application in Red-to-Blue Upconversion.

Osmium(II) polypyridines are a well-known class of complexes with luminescent metal-to-ligand charge-transfer (MLCT) excited states that are currently experiencing a revival due to their application potential in organic photoredox catalysis, triplet-triplet annihilation upconversion, and phototherapy. At the same time, there is increased interest in the development of photoactive complexes made from Earth-abundant rather than precious metals. Against this background, we present a homoleptic Mo(0) complex with a new diisocyanide ligand exhibiting different bite angles and a greater extent of π-conjugation than previously reported related chelates. This new design leads to deep red emission, which is unprecedented for homoleptic arylisocyanide complexes of group 6 metals. With a 3MLCT lifetime of 56 ns, an emission band maximum at 720 nm, and a photoluminescence quantum yield of 1.5% in deaerated toluene at room temperature, the photophysical properties are reminiscent of the prototypical [Os(2,2'-bipyridine)3]2+ complex. Under 635 nm irradiation with a cw-laser, the new Mo(0) complex sensitizes triplet-triplet annihilation upconversion of 9,10-diphenylanthracene (DPA), resulting in delayed blue fluorescence with an anti-Stokes shift of 0.93 eV. The photorobustness of the Mo(0) complex and the upconversion quantum yield are high enough to generate a flux of upconverted light that can serve as a sufficiently potent irradiation source for a blue-light-driven photoisomerization reaction. These findings are relevant in the greater contexts of designing new luminophores and photosensitizers for use in red-light-driven photocatalysis, photochemical upconversion, light-harvesting, and phototherapy.

Trifluoromethyl substitution enhances photoinduced activity against breast cancer cells but reduces ligand exchange in Ru(ii) complex.

A series of five ruthenium complexes containing triphenyl phosphine groups known to enhance both cellular penetration and photoinduced ligand exchange, cis-[Ru(bpy)2(P(p-R-Ph)3)(CH3CN)]2+, where bpy = 2,2′-bipyridine and P(p-R-Ph)3 represent para-substituted triphenylphosphine ligands with R = –OCH3 (1), –CH3 (2) –H (3), –F (4), and –CF3 (5), were synthesized and characterized. The photolysis of 1–5 in water with visible light (λirr ≥ 395 nm) results in the substitution of the coordinated acetonitrile with a solvent molecule, generating the corresponding aqua complex as the single photoproduct. A 3-fold variation in quantum yield was measured with 400 nm irradiation, Φ400, where 1 is the most efficient with a Φ400 = 0.076(2), and 5 the least photoactive complex, with Φ400 = 0.026(2). This trend is unexpected based on the red-shifted metal-to-ligand charge transfer (MLCT) absorption of 1 as compared to that of 5, but can be correlated to the substituent Hammett para parameters and pKa values of the ancillary phosphine ligands. Complexes 1–5 are not toxic towards the triple negative breast cancer cell line MDA-MB-231 in the dark, but 3 and 5 are >4.2 and >19-fold more cytotoxic upon irradiation with blue light, respectively. A number of experiments point to apoptosis, and not to necrosis or necroptosis, as the mechanism of cell death by 5 upon irradiation. These findings provide a foundation for understanding the role of phosphine ligands on photoinduced ligand substitution and show the enhancement afforded by –CF3 groups on photochemotherapy, which will aid the future design of photocages for photochemotherapeutic drug delivery.