Photothermal Effect Research Articles

Intermetallics triggering pyroptosis and disulfidptosis in cancer cells promote anti-tumor immunity

Pyroptosis, an immunogenic programmed cell death, could efficiently activate tumor immunogenicity and reprogram immunosuppressive microenvironment for boosting cancer immunotherapy. However, the overexpression of SLC7A11 promotes glutathione biosynthesis for maintaining redox balance and countering pyroptosis. Herein, we develop intermetallics modified with glucose oxidase (GOx) and soybean phospholipid (SP) as pyroptosis promoters (Pd2Sn@GOx-SP), that not only induce pyroptosis by cascade biocatalysis for remodeling tumor microenvironment and facilitating tumor cell immunogenicity, but also trigger disulfidptosis mediated by cystine accumulation to further promote tumor pyroptosis in female mice. Experiments and density functional theory calculations show that Pd2Sn nanorods with an intermediate size exhibit stronger photothermal and enzyme catalytic activity compared with the other three morphologies investigated. The peroxidase-mimic and oxidase-mimic activities of Pd2Sn cause potent reactive oxygen species (ROS) storms for triggering pyroptosis, which could be self-reinforced by photothermal effect, hydrogen peroxide supply accompanied by glycometabolism, and oxygen production from catalase-mimic activity of Pd2Sn. Moreover, the increase of NADP+/NADPH ratio induced by glucose starvation could pose excessive cystine accumulation and inhibit glutathione synthesis, which could cause disulfidptosis and further augment ROS-mediated pyroptosis, respectively. This two-pronged treatment strategy could represent an alternative therapeutic approach to expand anti-tumor immunotherapy.

Biomimetic Scaffolds Regulating the Iron Homeostasis for Remolding Infected Osteogenic Microenvironment.

The treatment of infected bone defects (IBDs) needs simultaneous elimination of infection and acceleration of bone regeneration. One mechanism that hinders the regeneration of IBDs is the iron competition between pathogens and host cells, leading to an iron deficient microenvironment that impairs the innate immune responses. In this work, an in situ modification strategy is proposed for printing iron-active multifunctional scaffolds with iron homeostasis regulation ability for treating IBDs. As a proof-of-concept, ultralong hydroxyapatite (HA) nanowires are modified through in situ growth of a layer of iron gallate (FeGA) followed by incorporation in the poly(lactic-co-glycolic acid) (PLGA) matrix to print biomimetic PLGA based composite scaffolds containing FeGA modified HA nanowires (FeGA-HA@PLGA). The photothermal effect of FeGA endows the scaffolds with excellent antibacterial activity. The released iron ions from the FeGA-HA@PLGA help restore the iron homeostasis microenvironment, thereby promoting anti-inflammatory, angiogenesis and osteogenic differentiation. The transcriptomic analysis shows that FeGA-HA@PLGA scaffolds exert anti-inflammatory and pro-osteogenic differentiation by activating NF-κB, MAPK and PI3K-AKT signaling pathways. Animal experiments confirm the excellent bone repair performance of FeGA-HA@PLGA scaffolds for IBDs, suggesting the promising prospect of iron homeostasis regulation therapy in future clinical applications.

Extremely Fast Wicking Self‐Layered Interpenetrating Network Hydrogel for Rapid All Day Collection of Atmospheric Water

AbstractHygroscopic salt hydrogel photothermal composites and related technology are a promising pathway for water harvesting. However, due to the overly cumbersome preparation process, the distribution of the surface photothermal layer is difficult to control and the photothermal efficiency is low. In this paper, a method is proposed to greatly simplify the preparation process of photothermal layer hydrogels and improve their atmospheric water harvesting performance by constructing temperature‐sensitive interpenetrating networks. Due to the decomposition of some reversible hydrated structures in the network during heating and warming, carbon nanotubes move autonomously to form a layered structure with a photothermal effect on the upper surface, which can return to its original state after cooling and remain stable at room temperature or under solar illumination. Compared with hydrogels with general layered structure or overall distribution of photothermal materials, agar/GG/PAM/CNT hydrogel has faster moisture adsorption efficiency and higher desorption efficiency, and during the 24 h continuous sorption–desorption cycle is capable of achieving high water yield of 2.57 Lwater kgsorbents−1 day−1, superior to most recent hydrogel adsorbents. Simplifying the preparation process while maintaining high efficiency, while greatly improving photothermal performance, paves the way for cost‐effective mass production applications for a wide range of hygroscopic salt‐hydrogel photothermal composites.

H2O2 Self-Supplied MoS2/CaO2 Nanozyme Hydrogel with Near-Infrared Photothermal Synergetic Cascade Peroxidase-Like Activity for Wound Disinfection.

In wound healing and clinical anti-infection therapy, the current feasibility of nanocatalysts is extremely limited because of inadequate reactive oxygen species (ROS) generation. Herein, a novel H2O2 self-supplying nanocomposite (M/C/AEK) consists of molybdenum disulfide (MoS2) decorated with calcium peroxide (CaO2) prepared at ambient temperature and encapsulated in AEK hydrogel. In the presence of H2O2 and poly(vinyl pyrrolidone) (PVP), CaO2 nanoclusters, ≈30nm, are anchored on the MoS2 surface. MoS2/CaO2 can induce both a cascaded peroxidase (POD)-like and catalase (CAT)-like catalytic activity to produce toxic hydroxyl radicals through self-supplied H2O2 and O2 responsive to the faintly acidic environment of acute wounds. The POD-like activity is increased under acidic compared with neutral conditions, allowing selective treatment of acute, slightly acidic wounds while avoiding the side effects of high-concentration antibacterial agents on normal tissues. The high near-infrared photothermal effect synergistically with POD-like/CAT-like activity of MoS2/CaO2 boosts the production of more ROS to eradicate Staphylococcus aureus and Escherichia coli bacteria (98.6% and 98.9%) effectively and selectively stimulate wound healing. The porous M/C/AEK hydrogel in the wound microenvironment can efficiently capture bacteria, and its Ca2+ ions and keratin stimulate healing, revealing excellent potential in advanced wound care and infection control therapies.

Bacterial cellulose nanofiber reinforced self-healing hydrogel to construct a theranostic platform of antibacterial and enhanced wound healing

In order to promote wound healing, self-healing hydrogels with moisturizing property are employed as wound dressing. In this study, bacterial cellulose nanofibers (BCN) with high mechanical strength are used as reinforcement to improve the mechanical properties of self-healing hydrogels. A multifunctional self-healing hydrogel has been constructed by incorporating natural biomass, including Ag hybrid bacterial cellulose nanofiber (Ag-BCN), resveratrol (Res), and carbon nanodots (CNDs). The results of in vitro experiments demonstrate that the mechanical strength of the hybrid hydrogel was increased by 6 times with the addition of Ag-BCN, which also offers excellent antibacterial efficiency (S. aureus 99.99 % and E. coli 99.68 %). The hydrogel with CNDs can observe the healing process of the crack in real time and realize the controlled release of Res through photothermal effect. Moreover, the results of animal model experiments indicate that the prepared hydrogel could reduce the infection of the wound, effectively shorten the progress of wound healing (from 21d to 14 d). All the results imply that the prepared hydrogel has great promise in the application of skin wound healing.

Eliminating Intracellular MRSA via Mannosylated Lipid-Coated Calcium Phosphate Nanoparticles.

Methicillin-resistant Staphylococcus aureus (MRSA) within cells proves exceptionally challenging to eradicate using conventional antimicrobials, resulting in recurring infections and heightened resistance. Herein, we reported an innovative mannosylated lipid-coated photodynamic/photothermal calcium phosphate nanoparticle (MAN-LCaP@ICG) for eradicating intracellular MRSA. The MAN-LCaP functioned as the vehicle for drug delivery, exhibiting preferential uptake by macrophages and facilitating the transport of ICG to intracellular pathogens. The MAN units integrated into MAN-LCaP@ICG could promote binding with MAN residuals on macrophage cells, as evidenced by cellular uptake assays using fluorescence microscopy and flow cytometry. Following its targeted accumulation, MAN-LCaP@ICG could enter into the cytoplasm and efficiently eradicate intracellular MRSA by a combination of the lysosome escape capability of CaP and the photodynamic and photothermal therapeutic effects of ICG. Furthermore, MAN-LCaP@ICG could kill MRSA more effectively than LCaP@ICG without MAN units or free ICG in a mouse peritoneal infection model. Therefore, MAN-LCaP@ICG provided a promising direction for human clinical application in combating intracellular infections.

Supramolecular photothermal agents mediated by black hole hosts

High-performance organic photothermal agents (PTAs) hinges primarily on manipulating non-radiative decay processes, which typically necessitates intricate and time-intensive molecular engineering. The main challenge is how to bring dye and quencher into close molecular contact at a sub-nanometer distance for effective quenching. A host-guest strategy is presented to fabricate supramolecular PTAs by non-radiative electron transfer. Through strong complexation of dye with a “black hole host”, quaternary-ammonium modified calix[4]arene tetraoctyloxy ether (QC4A-8C), photothermal performances of ten distinct dyes were optimized to an unprecedented degree. The potential of supramolecular PTAs in biological application was evaluated photothermal therapy in vitro and in vivo using zinc tetrasulfonate phthalocyanine@QC4A-8C. This study provides insights into leveraging existing dyes to augment photothermal effects through electron transfer, offering a streamlined pathway for the development of safe and efficient supramolecular PTAs.

Robust mussel-inspired LBL carbon nanotube-based superhydrophobic polyurethane sponge for efficient oil–water separation utilizing photothermal effect

Superhydrophobic materials possessing efficient and rapid oil–water separation capabilities, as well as robustness, have emerged as the epicenter of global attention. Conventional three-dimensional adsorbent materials often succumb to impaired performance under extreme environmental conditions, rendering it arduous to ensure the efficacy of oil–water separation, and confining the application scenarios. In this study, polyurethane sponges (PUs) co-modified with stearic acid (SA), polydimethylsiloxane (PDMS), and multi-walled carbon nanotubes (MWCNTs), designated as SA-PDMS/MWCNTs@PU (SPMPU), were successfully synthesized via layer-by-layer (LBL) self-assembly and liquid-phase deposition. The SPMPU sponge exhibits an overall separation efficiency of not less than 90 %. It boasts a stable adsorption capacity, formidable mechanical properties, and commendable reusability. SPMPU sponges maintain unparalleled stability in extreme environments, such as strong acids and alkalis, and in the photothermal effect experiment, the SPMPU sponge can attain a temperature of 101.5 °C within 2 min, with rapid reaction kinetics, high efficiency, and unwavering stability. Through the photothermal effect-assisted oil–water separation, a reliable solution is furnished for the current oil–water separation endeavors. The SPMPU sponge preparation is uncomplicated, economical, and yields stable performance, holding significant potential for application in marine oil spills and industrial oil–water separation scenarios.

Integrating dual heat sources to enhance thermoelectric generator power output

The escalating demand for sustainable power sources for wearable electronics necessitates innovative solutions. This study tackles the challenge of sustainably powering wearable electronics, addressing the limitations of traditional batteries. The approach utilizes a thermoelectric generator with a flexible and stretchable substrate that integrates the photothermal effect and human body temperature as a heat source. A unique strategy is employed to achieve this, involving the combination of 10 g of polydimethylsiloxane, 0.5 g of carbon nanotubes powder, 1 g of base curing agent, and 1.15 g of ethyl acetate mixture used as the novel substrate material. The proposed composite substrate is paired with p-type and n-type thermoelectric legs of bismuth antimony telluride (Bi0.4Sb1.6Te3) and bismuth selenium telluride (Bi1.7Te3.7Se0.3), respectively. This innovative design ensures high flexibility, stretchability, and conformability, facilitating seamless integration into wearable electronic devices. Experimental validation and simulation-based studies reveal a power density of 166.29 μW/cm2, sufficient for powering small-scale wearable electronics. The thermoelectric generator coupled with a novel composite substrate showed 65.6 % stretchability, further underscoring its durability and adaptability. The critical finding lies in the dual heat source integration, which collectively boosts power output and ensures year-round performance, pushing the boundaries of wearable energy harvesting technologies.

Photo-Amplified Plasma Membrane Rupture by Membrane-Anchoring NIR-II Small Molecule Design for Improved Cancer Photoimmunotherapy.

Immunotherapy is a promising cancer treatment method for eradicating tumor cells by enhancing the immune response. However, there are several major obstacles to conventional phototherapy-mediated immune responses, including inadequate immunogenicity and immunosuppressive environment. Here, we present a novel photoimmunotherapy modality-the development of membrane-anchoring small molecule inducing plasma membrane rupture (PMR) by NIR-II photo-stimulation, thus evoking cell necrotic death and enhancing antitumor immunotherapy. Our top-performing membrane-anchoring small molecule (CBT-3) exhibits temperature-tunable PMR efficiency, allowing rapid necrotic death in cancer cells at 50 μM dose by using exogenous NIR-II light-mediated mild photothermal effect (1064 nm, 0.6 W cm-2). Further evidence indicated that this gentle therapeutic approach activated inflammatory signaling pathways in cells, enhanced immunogenic cell death, and reshaped the immunosuppressive tumor microenvironment, ultimately promoting systemic antitumor immune responses in vivo. This study represents the first instance of utilizing NIR-II photo-amplified PMR effect based on membrane-anchoring small molecule, providing a novel avenue for advancing cancer photoimmunotherapy.

Fabrication of Low-Cost Porous Carbon Polypropylene Composite Sheets with High Photothermal Conversion Performance for Solar Steam Generation.

The development of absorber materials with strong light absorption properties and low-cost fabrication processes is highly significant for the application of photothermal conversion technology. In this work, a mixed powder consisting of NaCl, polypropylene (PP), and scale-like carbon flakes was ultrasonically pressed into sheets, and the NaCl was then removed by salt dissolution to obtain porous carbon polypropylene composite sheets (P-CPCS). This process is simple, green, and suitable for the low-cost, large-area fabrication of P-CPCS. P-CPCS has a well-distributed porous structure containing internal and external connected water paths. Under the dual effects of the carbon flakes and porous structure, P-CPCS shows excellent photothermal conversion performance in a broad wavelength range. P-CPCS-40 achieves a high temperature of 128 °C and a rapid heating rate of 12.4 °C/s under laser irradiation (808 nm wavelength, 1.2 W/cm2 power). When utilized for solar steam generation under 1 sun irradiation, P-CPCS-40 achieves 98.2% evaporation efficiency and a 1.81 kg m-2 h-1 evaporation rate. This performance means that P-CPCS-40 outperforms most other previously reported absorbers in terms of evaporation efficiency. The combination of carbon flakes, which provide a photothermal effect, and a porous polymer structure, which provides light-capturing properties, opens up a new strategy for desalination, sewage treatment, and other related fields.

Photothermal Synergistic Effect Induces Bimetallic Cooperation to Modulate Product Selectivity of CO2 Reduction on Different CeO2 Crystal Facets

AbstractProduct selectivity of solar‐driven CO2 reduction and H2O oxidation reactions has been successfully controlled by tuning the spatial distance between Pt/Au bimetallic active sites on different crystal facets of CeO2 catalysts. The replacement depth of Ce atoms by monatomic Pt determines the distance between bimetallic sites, while Au clusters are deposited on the surface. This space configuration creates a favourable microenvironment for the migration of active hydrogen species (*H). The *H is generated via the activation of H2O on monatomic Pt sites and migrate towards Au clusters with a strong capacity for CO2 adsorption. Under concentrated solar irradiation, selectivity of the (100) facet towards CO is 100 %, and the selectivity of the (110) and (111) facets towards CH4 is 33.5 % and 97.6 %, respectively. Notably, the CH4 yield on the (111) facet is as high as 369.4 μmol/g/h, and the solar‐to‐chemical energy efficiency of 0.23 % is 33.8 times higher than that under non‐concentrated solar irradiation. The impacts of high‐density flux photon and thermal effects on carriers and *H migration at the microscale are comprehensively discussed. This study provides a new avenue for tuning the spatial distance between active sites to achieve optimal product selectivity.

Drug release profile of phenytoin-loaded starch-based biomaterials incorporating hierarchical microparticles with photothermal effects

This study aimed to synthesize phenytoin (PHT)-loaded water chestnut starch-based biomaterials and evaluate their drug release kinetics for use in transdermal drug delivery systems for antiepileptic therapy. Hierarchical microparticles (HMPs) extracted from human hair were also used to improve the PHT release efficiency. The physicochemical characteristics of PHT, HMPs, and the prepared biomaterials were evaluated by physical properties, antimicrobial activities, FE-SEM, FT-IR, XRD, 1H NMR, and 13C CPMAS solid-state NMR. The photothermal effect and the PHT release profile were confirmed through 808 nm NIR laser irradiation. After 30 min of the laser exposure, the temperature of the HMP-added biomaterials increased by 1.50–1.59 times compared to that of without the HMPs. PHT release in buffers and artificial skin test under NIR laser irradiation enhanced by 1.20–1.85 times owing to the photothermal effect. The release kinetics in pH buffer and artificial skin were determined using the Fickian diffusion and Korsmeyer-Peppas models. Additionally, to verify the transdermal penetration of PHT, drug-release simulations were conducted using rhodamine B in agar blocks and pig ears. The results implied that the photothermal effect of the HMPs enhanced the penetration of the drug.

MgCr2O4/MgIn2S4 Spinel/Spinel S-Scheme Heterojunction: A Robust Catalyst for Photothermal-Assisted Photocatalytic CO2 Reduction.

Photocatalytic CO2 reduction technology has engaged significant attention due to its high efficiency, high selectivity, and environmental friendliness. However, its application is severely restrained by issues such as low separation efficiency of photogenerated carriers and a limited light absorption range. This work proposes an innovative MgCr2O4/MgIn2S4 magnesium-based spinel/spinel heterostructure photocatalyst to improve the photocatalytic CO2 reduction efficiency through the synergistic contributions of S-scheme heterojunction and photothermal effect. On the one hand, the unique S-scheme charge transfer mechanism enables the effective separation of photogenerated carriers. On the other hand, the photothermal effect allows an accelerated charge migration by increasing the reaction center temperature. Moreover, the abundant oxygen vacancies serve as electron traps and CO2 adsorption sites, unifying reaction and adsorption sites and substantially improving catalytic efficiency. Under UV-vis and UV-vis-NIR illumination, the average CO yields of the MgCr2O4/MgIn2S4 composite are 8.03 and 15.62 μmol g-1 h-1, respectively, greatly higher than those of pure MgCr2O4 and MgIn2S4 samples. Furthermore, the fabricated photocatalyst demonstrates excellent performance and structure stability. Therefore, this work may offer a new strategy for designing efficient and stable photocatalysts.

Fast Production of Covalent Organic Frameworks for Covalent Enzyme Immobilization with Boosted Enzymatic Catalysis by Solar‐Driven Photothermal Effect

Developing new enzyme‐immobilization systems to stabilize their dynamic structures and meanwhile enhance their catalytic activity is of great significance but very challenging. Herein, we design and fabricate a class of robust mesoporous covalent organic frameworks (COFs) via Michael addition‐elimination reaction. It is found that highly crystalline COFs can be produced in 10 min, which is attributed to the promoting effect of the intramolecular hydrogen bond activation. The COFs rich in hydroxyl groups can be facilely post‐modified by epibromohydrin to covalently immobilize enzymes with both high loading and activity. Furthermore, we create a solar‐driven photothermal‐promoted strategy by introducing photoactive azo groups to COF carriers, which can boost the enzyme catalytic performance (lipase) with much higher conversion of various racemic substrates and chiral resolution upon solar light irradiation. The heterogeneous biocatalysts also demonstrate exceptional reusability and stability. This work provides a green and energy‐efficient approach to facilitate the scale application of enzyme‐immobilized biocatalysts.

Collaborative treatment of bone injury with water/acid-reactive nanomotors and photothermal effects

Collaborative treatment of bone injury with water/acid-reactive nanomotors and photothermal effects

Fast Production of Covalent Organic Frameworks for Covalent Enzyme Immobilization with Boosted Enzymatic Catalysis by Solar‐Driven Photothermal Effect

Developing new enzyme‐immobilization systems to stabilize their dynamic structures and meanwhile enhance their catalytic activity is of great significance but very challenging. Herein, we design and fabricate a class of robust mesoporous covalent organic frameworks (COFs) via Michael addition‐elimination reaction. It is found that highly crystalline COFs can be produced in 10 min, which is attributed to the promoting effect of the intramolecular hydrogen bond activation. The COFs rich in hydroxyl groups can be facilely post‐modified by epibromohydrin to covalently immobilize enzymes with both high loading and activity. Furthermore, we create a solar‐driven photothermal‐promoted strategy by introducing photoactive azo groups to COF carriers, which can boost the enzyme catalytic performance (lipase) with much higher conversion of various racemic substrates and chiral resolution upon solar light irradiation. The heterogeneous biocatalysts also demonstrate exceptional reusability and stability. This work provides a green and energy‐efficient approach to facilitate the scale application of enzyme‐immobilized biocatalysts.

Multifunctional NIR-II nanoplatform for disrupting biofilm and promoting infected wound healing

Healing wounds presents a significant challenge due to bacterial biofilm infections and the inherent drug resistance of these biofilms. This report introduces a multifunctional nanoplatform (NPs) designed to combat wound biofilm infections using NIR-II photothermal therapy. The NPs are self-assembled from amphiphilic polymers (AP) to encapsulate photothermal polymers (PT) through classic electrostatic interactions. Importantly, these NPs are electrically neutral, which enhances their ability to penetrate biofilms effectively. Once inside the biofilm, the NPs achieve complete thermal ablation of the biofilm under NIR-II laser irradiation. Additionally, when exposed to laser and the GSH microenvironment, the NPs exhibit strong photothermal effects and self-degradation capabilities. In vitro tests confirm that the NPs have excellent antibacterial and anti-biofilm properties against methicillin-resistant Staphylococcus aureus (MRSA). In vivo studies demonstrate that the NPs can efficiently clear wound biofilm infections and promote wound healing. Notably, the NPs show superior photothermal effects under NIR-II laser irradiation compared to NIR-I lasers. In summary, the developed NPs serve as an integrated diagnostic and therapeutic nano-antimicrobial agent, offering promising applications for biofilm wound infections and wound healing.

Versatile self-assembled near-infrared SERS nanoprobes for multidrug-resistant bacterial infection-specific surveillance and therapy

The rise of multidrug-resistant bacteria (MDRB) has made bacterial infection one of the biggest health threats, causing numerous antibiotics to fail. Real-time monitoring of bacterial disease treatment efficacy at the infection site is required. Herein, we report a versatile Raman tag 3,3′-diethylthiatricarbocyanine iodide (DTTC)-conjugated star-shaped Au-MoS2@hyaluronic acid (AMD@HA) nanocomposite as a surface-enhanced Raman scattering (SERS) nanoprobe for quick bacterial identification and in-situ eradication. Localized surface plasmon resonance (LSPR) from the hybrid metallic nanostructure makes AMD@HA highly responsive to the near-infrared laser, enabling it to demonstrate a photothermal (PTT) effect, increased SERS activity, and peroxidase-like catalytic reaction to release reactive oxygen species. The tail vein injection of AMD@HA nanoprobes is invasive, however SERS imaging for bacterial identification is non-invasive and sensitive, making it an efficient residual bacteria monitoring method. The detection limit for methicillin-resistant Staphylococcus aureus (MRSA) is as low as 102 CFU·mL-1, and the substrates allow for taking 120 s to acquire a Raman image of 1600 (40 × 40) pixels. In mouse models of MRSA-induced wound infection and skin abscess, the combination of AMD@HA-mediated PTT and catalytic therapy demonstrates a synergistic effect in promoting wound healing through rapid sterilization. This SERS-guided therapeutic approach exhibits little toxicity and does not cause considerable collateral damage, offering a highly promising intervention for treating diseases caused by MDRB. Statement of significanceThis research introduces a SERS nanoprobe, AMD@HA, for the rapid identification and eradication of multidrug-resistant bacteria (MDRB), a critical health threat. The nanoprobe leverages localized surface plasmon resonance for photothermal therapy and enhanced Raman signals, offering a sensitive, non-invasive diagnostic tool. With a low detection limit for MRSA and a synergistic therapeutic effect in mouse models, our approach holds significant promise for treating MDRB-driven infections with minimal toxicity, advancing the field of antimicrobial strategies.

Engineering morphological architecture of superhydrophobic/hydrophilic composite membrane for efficient photothermal membrane distillation

The viability and efficacy of photothermal membrane distillation (PMD) is still uncertain due to its inherent energy-efficiency and throughput mass flux limitation. Herein, we develop a delamination-free multilayer photothermal membrane that simultaneously imparts slashed mass transfer resistance, enhanced photothermal effect and strong water-repellency by engineering morphological architecture. Using a one-step programmed dual-channel electrospinning followed by an electrostatic spraying technique, the proposed membrane is composited by a thick water-intrudable hydrophilic supporting layer, a thin hydrophobic layer, and an ultrathin Ti3C2Tx MXene-engineered superhydrophobic layer. It is proposed that the morphological architecture engineering could render mitigation of mass transfer resistance, firm water-repellency, and robust heat localization. Hence, in addition to superior flux of 1.27 L m−2 h−1 (inlet feed/permeate at 20/20 °C) and 15.89 L m−2 h−1 (inlet feed/permeate at 50/20 °C), prominent solar efficiency (76.34 % and 96.45 %) of the proposed composite membrane (DS15-M) also was achieved during PMD operation (1.0 kW m−2). Moreover, the DS15-M showcased not only robust wetting resistance and long-term consistency, but also obviously mitigated temperature polarization effect during the PMD operation. This research work emphasizes the important role of morphological architecture in rendering performance enhancement, which is a significant implication in engineering membrane architecture for PMD application.