photo-Fenton Reaction Research Articles

Construction of a Visible-Light-Response Photocatalysis-Self-Fenton Degradation System of Coupling Industrial Waste Red Mud to Resorcinol-Formaldehyde Resin.

Heterogeneous photocatalysis-self-Fenton technology is a sustainable strategy for treating organic pollutants in actual water bodies with high-fluent degradation and high mineralization capacity, overcoming the limitations of the safety risks caused by adding external iron sources and hazardous chemicals in the homogeneous Fenton reaction and injecting high-intensity energy fields in photo-Fenton reaction. Herein, a photo-self-Fenton system based on resorcinol-formaldehyde (RF) resin and red mud (RM) was established to generate hydrogen peroxide (H2O2) in situ and transform into hydroxy radical (•OH) for efficient degradation of tetracycline (TC) under visible light irradiation. The capturing experiments and electron spin resonance (ESR) confirmed that the hinge for the enhanced performance of this system is the superior H2O2 yield (499 μM) through the oxygen reduction process (ORR) of the two-step single-electron over the resin and the high concentration of •OH due to activation effect of RM. In addition, the Fe2+/Fe3+ cycles are accelerated by photoelectrons to effectively initiate the photo-self-Fenton reaction. Finally, the possible degradation pathways were proposed via liquid chromatography-mass spectrometry (LC-MS). This study provides a new idea for environmental recovery in a waste-based heterogeneous photocatalytic self-Fenton system.

Magnetically separable Cd/CdS-ZnFe2O4/α-Fe2O3 Z-scheme heterostructure for boosting the photo-Fenton removal of antibiotic

The photocatalytic degradation of antibiotic pollution under visible light is significant for environmental protection. However, developing photocatalysts that exhibit strong responsiveness to visible light, along with high efficiency and stability, poses a substantial challenge. In this study, we have successfully constructed Cd/CdS-ZnFe2O4/α-Fe2O3 heterostructured photocatalysts. ZnFe2O4/α-Fe2O3 nanoparticles would grow on the surface of Cd/CdS, which forms the Z-Scheme heterostructure. The samples were characterized by structure, morphology, elemental and electrochemical analysis. The results show that the Cd/CdS-ZnFe2O4/α-Fe2O3 catalyst has reached 91.72% tetracycline degradation performance in the photo-Fenton reaction. Through the experimental results and the energy band position, the internal Z-scheme heterojunction reaction mechanism of improving photo-Fenton degradation performance was proposed. This research would contribute to advancing the rational design and synthesis of heterojunction photocatalysts for efficient antibiotic removal under visible light.

Visible-light photocatalytic O2-to-H2O2 via nitrogen-graphene quantum dots-modified Bi2Fe4O9 for synchronizing the reduction of Cr(VI) and oxidation of organic contaminants: Kinetics, mechanism, and performance

Synergistic coexistence of toxic chromium and organic contaminants in wastewater has made treatments highly complicated. As solar-driven wastewater treatments become increasingly environmentally and economically attractive, a photocatalyst (denoted as N-GQDs/Bi2Fe4O9) is developed for photocatalytic reduction of Cr(VI) and simultaneous oxidation of organic contaminants in wastewater. Incorporating N-GQDs (as electron reservoir) into Bi2Fe4O9 modulates the band structure (from 2.40 to 2.24 eV), facilitating charge transfer and electron accumulation at N-GQDs. Due to the photo-Fenton synergistic reaction between N-GQDs/Bi2Fe4O9 photocatalysis process, N-GQDs/ Bi2Fe4O9 demonstrates excellent H2O2 generation (1.64 μM min−1) and H2O2 activation (0.0063 min−1) performance, leading to generation of more highly reactive species (i.e., OH radicals), achieving BPA removal of 99.9 % under visible-light irradiation for 100 min. Interestingly, the photo-Fenton synergistic reaction enhances the reduction of Cr(VI) (99.8 %), while the Fe(II) active sites on the N-GQDs/Bi2Fe4O9 can also promote the synchronized Cr(VI) reduction. Also, the accumulated electron around N-GQDs enhances redox cycles of Fe(II)/Fe(III) reactions to realize the sustainable photo-Fenton catalytic reaction. This new N-GQDs/Bi2Fe4O9 photocatalyst demonstrates the feasibility of concurrent reduction of toxic Cr(VI)-to-Cr(III) and oxidation of organic contaminants in wastewater with a simple process via nearly unlimited solar energy.

Synergism of solar-driven interfacial evaporation and photo-Fenton Cr(VI) reduction by sustainable Bi-MOF-based evaporator from waste polyester

The integration of interfacial solar steam generation and photocatalytic degradation technology has provided a promising platform to simultaneously produce freshwater and degrade pollutants. However, constructing low-cost, multi-functional evaporators for treating Cr(VI)-polluted water remains challenging, and the synergistic mechanism on Cr(VI) reduction is fuzzy. Herein, we propose the combined strategy of ball milling and solution mixing for the sustainable production of Bi-MOF microrod from waste poly(ethylene terephthalate), and construct Bi-MOF-based solar evaporators for simultaneous photo-Fenton Cr(VI) reduction and freshwater production. Firstly, the evaporator comprised of Bi-MOF microrod and graphene nanosheet possesses high light absorption, efficient photothermal conversion, and good hydrophilic property. Attributing to the advantages, the hybrid evaporator exhibits the evaporation rate of 2.16 kg m−2 h−1 and evaporation efficiency of 87.5% under 1 kW m−2 of irradiation. When integrating with photo-Fenton reaction, the Cr(VI) reduction efficiency is 91.3%, along with the reaction kinetics of 0.0548 min−1, surpassing many advanced catalysts. In the outdoor freshwater production and Cr(VI) reduction, the daily accumulative water yield is 5.17 kg m−2 h−1, and the Cr(VI) reduction efficiency is 99.9%. Furthermore, we prove that the localization effect derived from the interfacial solar-driven evaporation enhances H2O2 activation for the photo-Fenton reduction of Cr(VI). Based on the result of density functional theory, Bi-MOF microrod provides rich active centers for H2O2 activation to produce active sites such as e− or ·O2−. This study not only proposes a new strategy to construct multi-functional solar evaporators for freshwater production and catalytic reduction of pollutants, but also advances the chemical upcycling of waste polyesters.

In situ single iron atom doping on Bi2WO6 monolayers triggers efficient photo-fenton reaction

Developing an efficient photocatalytic system for hydrogen peroxide (H2O2) activation in Fenton-like processes holds significant promise for advancing water purification technologies. However, challenges such as high carrier recombination rates, limited active sites, and suboptimal H2O2 activation efficiency impede optimal performance. Here we show that single-iron-atom dispersed Bi2WO6 monolayers (SIAD-BWOM), designed through a facile hydrothermal approach, can offer abundant active sites for H2O2 activation. The SIAD-BWOM catalyst demonstrates superior photo-Fenton degradation capabilities, particularly for the persistent pesticide dinotefuran (DNF), showcasing its potential in addressing recalcitrant organic pollutants. We reveal that the incorporation of iron atoms in place of tungsten within the electron-rich [WO4]2− layers significantly facilitates electron transfer processes and boosts the Fe(II)/Fe(III) cycle efficiency. Complementary experimental investigations and theoretical analyses further elucidate how the atomically dispersed iron induces lattice strain in the Bi2WO6 monolayer, thereby modulating the d-band center of iron to improve H2O2 adsorption and activation. Our research provides a practical framework for developing advanced photo-Fenton catalysts, which can be used to treat emerging and refractory organic pollutants more effectively.

Understanding the synergistic interactions between photo-Fenton and photocatalytic reactions in hemin-anchored SnO2

Sensitization of wide-gap metal oxides by the porphyrins has been promising to utilize the major fraction of solar light for photocatalytic reactions. In this context, rutile-SnO2 was anchored with hemin complex and their performance was evaluated for the 4-nitro phenol (4-NP) degradation under UV/visible light. Driven by the significant interactions between -COOH and surface -OH functional groups of hemin and SnO2 respectively, a new linkage O=CO-Sn was formed at the interface, which was vital for charge carrier transfer between them. Both X-ray diffraction studies and scanning electron microscope analysis confirmed that the surface hemin adsorption did not alter the crystal structure and the morphology of pristine SnO2. The light absorption properties revealed a red shift in the optical response of the composite, which facilitated the photocatalytic reactions to operate under visible light. The electrochemical and photoluminescence measurements collectively attested to the enhanced charge carrier separation in the composite compared to pure SnO2. The synergism arising from the photo-Fenton and photocatalytic reactions was derived from the cyclic reactions of Fe(II)/Fe(III) and oxidation of hydroxyl radicals by the valence band holes of SnO2 with H2O2 under UV light. In contrast, the sensitization process resulted in electron transfer from the excited state of hemin to the conduction band (CB) of SnO2 under visible light. Such distinct mechanistic pathways by the metal oxide-porphyrin composite would be promising for wastewater purification under UV–visible light region in near future.

Effective degradation of organophosphorus pesticide by photo-Fenton and in-situ recovery/utilization of the generated phosphorus: Dual function of iron ions

Efficient recovery and utilization of the generated phosphorus during the process of organophosphorus pesticides degradation is promising but still challenging. In this study, a photo-Fenton-crystallization sequential processes were developed to achieve the degradation of organophosphorus pesticides and simultaneous recovery/utilization of the generated phosphate. In this system, iron ions exhibited dual functionality: activator of the photo-Fenton reaction and crystallizing agent of the generated phosphate and the crystals obtained were proved to be vivianite by X-ray Diffraction and Scanning Electron Microscopy. The results showed that a trichlorfon degradation rate exceeding 90% and a vivianite yield of 85.1% was achieved. Parameters such as pH and the Fe-P ratio play pivotal roles in phosphorus recovery efficiency from wastewater. In addition, the toxicity of the degradation by-products was much less than that of trichlorfon by the Toxicity Estimation Software Tool. Additionally, the recovered vivianite exhibits advantageous catalytic properties to activate peroxymonosulfate for the degradation of different pollutants. This study provides a novel perspective for the treatment and utilization of organophosphorus pesticides.

Enhanced degradation of enoxacin using ferrihydrite-catalyzed heterogeneous photo-Fenton process

The ferrihydrite-catalyzed heterogeneous photo-Fenton reaction shows great potential for environmental remediation of fluoroquinolone (FQs) antibiotics. The degradation of enoxacin, a model of FQ antibiotics, was studied by a batch experiment and theoretical calculation. The results revealed that the degradation efficiency of enoxacin reached 89.7% at pH 3. The hydroxyl radical (∙OH) had a significant impact on the degradation process, with a cumulative concentration of 43.9 μmol L−1 at pH 3. Photogenerated holes and electrons participated in the generation of ∙OH. Eleven degradation products of enoxacin were identified, with the main degradation pathways being defluorination, quinolone ring and piperazine ring cleavage and oxidation. These findings indicate that the ferrihydrite-catalyzed photo-Fenton process is a valid way for treating water contaminated with FQ antibiotics.

Degradation of antibiotic sulphamethoxazole by application of modified photo-Fenton processes: kinetics, degradation pathways and toxicity

ABSTRACT Degradation of antibiotic sulphamethoxazole (SMX) was studied by applying modified photo-Fenton reactions (MPF) with the novel choice of using sodium tripolyphosphate (STP) and sodium hexametaphosphate (SHP) complexing agents. STP and SHP have a strong ability as complexing agents because they can sequester and complex with different ions. Process optimisation was performed using Doehlert design at pH = 6. This study presented higher performance for MPF using STP and SHP complexing agents than conventional photo-Fenton and H2O2 + UV process. The best yields were associated with the formation of a smaller number of intermediates with high degradation efficiency and low oxidative stress, environment-friendly and promising processes.

Wood-converted porous carbon decorated with MIL-101(Fe) derivatives for promoting photo-Fenton degradation of ciprofloxacin.

In response to the escalating concerns over antibiotics in aquatic environments, the photo-Fenton reaction has been spotlighted as a promising approach to address this issue. Herein, a novel heterogeneous photo-Fenton catalyst (Fe3O4/WPC) with magnetic recyclability was synthesized through a facile two-step process that included in situ growth and subsequent carbonization treatment. This catalyst was utilized to expedite the photocatalytic decomposition of ciprofloxacin (CIP) assisted by H2O2. Characterization results indicated the successful anchoring of MIL-101(Fe)-derived spindle-like Fe3O4 particles in the multi-channeled wood-converted porous carbon (WPC) scaffold. The as-synthesized hybrid photocatalysts, boasting a substantial specific surface area of 414.90 m2·g-1 and an excellent photocurrent density of 0.79 μA·cm-2, demonstrated superior photo-Fenton activity, accomplishing approximately 100% degradation of CIP within 120 min of ultraviolet-light exposure. This can be attributed to the existence of a heterojunction between Fe3O4 and WPC substrate that promotes the migration and enhances the efficient separation of photogenerated electron-hole pairs. Meanwhile, the Fe(III)/Fe(II) redox circulation and mesoporous wood carbon in the catalyst synergistically enhance the utilization of H2O and accelerate the formation of •OH radicals, leading to heightened degradation efficiency of CIP. Experiments utilizing chemical trapping techniques have demonstrated that •OH radicals are instrumental in the CIP degradation process. Furthermore, the study on reusability indicated that the efficiency in removing CIP remained at 89.5% even through five successive cycles, indicating the structural stability and excellent recyclability of Fe3O4/WPC. This research presented a novel pathway for designing magnetically reusable MOFs/wood-derived composites as photo-Fenton catalysts for actual wastewater treatment.

Enhanced photo-Fenton degradation of dyes under visible light with recyclable γ-Fe2O3/CQDs: Catalyst preparation, performance and mechanism insight

A low band gap and visible light-responsive heterogeneous Photo-Fenton catalyst of γ-Fe2O3/CQDs micron composite was prepared under the one-pot hydrothermal method. The Photo-Fenton degradation of γ-Fe2O3/CQDs towards dye solution of rhodamine B(RhB), methyl blue (MB), and methyl orange (MO) was studied comparatively with α-Fe2O3. The γ-Fe2O3/CQDs exhibited remarkable catalytic performance for various dyes and with a first-order rate (k) of 14 times higher than that of initial α-Fe2O3 with a low concentration of H2O2 of 0.049 mmol. L−1 and a wider pH range of 3.1–7.1. The microstructure of the compounds was observed by XRD, SEM, TEM, FT-IR, and XPS characterization results suggested that the γ-Fe2O3/CQDs nanocomposite was formed through the stable Fe–O–C bonds, thus, the band gap decreased, and it is more favorable for the distance of holes and electrons. The free radical trapping experiment and EPR analysis indicated that •OH and 1O2 were the major active species during the typical photo-Fenton reaction. What's more, the γ-Fe2O3/CQDs also exhibited good stability and magnetic properties. DFT conclusion shows that the mechanism of the potential determination step (PDS) on α-Fe2O3(220) is the cleavage of H2O2 with an energy barrier of only 0.08 eV, which is 0.54 eV lower than that of OH* on γ-Fe2O3(220). Thus it can be deemed that γ-Fe2O3/CQDs perform much higher catalytic activity for the dissociation of H2O2 than α-Fe2O3. This work gives a feasible and economical countermeasure of visible light Photo-Fenton dispose of dye wastewater with a recyclable magnetic γ-Fe2O3/CQDs micron catalyst.

HOFs structured CN template enables the dual regulation of Cu–O and Cu–N active sites in porous Cu-g-CN for synergistic photo-Fenton process

Photo-Fenton catalysis with strong oxidation potential and cyclic stability represents a promising technique for addressing the escalating environmental challenges. However, the photo-Fenton activity using Fe/Cu doped graphitic carbon nitride (g-CN) catalysts is significantly hindered by the limited reaction interface and non-tunable surface-active sites. Herein, we present a novel CN polymer type hydrogen bonded organic framework (CN-HOFs) template derived Cu-g-CN (Cu/CH-g-CN) based hybriding catalyst (CN-HOFs/Cu/CH-g-CN), which process greatly optimized surface features for high-performance photo-Fenton reaction with exceptional durability in a broad pH range of 3–11. Importantly, the distinctive porous structure of CN-HOFs template offers not only high specific surface area, but also the possibility to regulate Cu active sites. The coexistence of Cu–O and Cu–N active sites is identified by XPS, which facilitates the separation and migration of photogenerated charges, expediting the redox cycle. The synergistic photo-Fenton reaction boosted by the porous CN-HOFs structure and the dual Cu active sites (Cu–O and Cu–N) was verified by degradation activity of tetracycline. Under visible light irradiation at a concentration of 20 mg/L, the degradation efficiency reaches nearly 100% within 20 min, with exceptional cycling stability. Further investigations have revealed that the Cu–O active site is conducive to the adsorption of organic pollutants, while the Cu–N active site promotes electron transfer, accelerates the cyclic conversion of Cu+ and Cu2+. The dual copper active site is beneficial for the generation of hydroxyl radicals and the stable operation of the catalyst, resulting in significant photo-Fenton activity. This work underscores the importance of regulating the nanoscale morphology and electronic structure of photofunctional catalysts, not only to increase the active sites for photo-Fenton reactions but also to facilitate charge transfer and the cycling of active metal ions, thereby improving the sustainability of heterogeneous photo-Fenton process.

Rapid separation of MOFs particles with the aid of PVDF hollow fiber membrane

Metal-organic frameworks (MOFs) have been widely investigated due to their fascinating structures and properties. However, the time-cost synthetic process and the difficult separation from liquid phase hinder their practical application. In this study, a self-made automatic apparatus containing commercial poly(vinylidene fluoride) (PVDF) hollow fiber membranes was used to separate MOFs from large-volume suspension. Taking MIL-88A(Fe) synthesized with industrial-grade chemicals as an example, the investment cost, operation cost, human cost, time duration during separation process, and unit cost price of MIL-88A(Fe) were significantly reduced by 62%, 82%, 100%, 90%, and 36%, respectively, compared to those of centrifugation. More importantly, MIL-88A(Fe) powders that were separated and purified by the apparatus were easy to be removed from membrane surface by slight vibration, which displayed good morphology, crystallinity, as well as high degradation efficiency toward organic contaminants via photo-Fenton reaction. Meanwhile, the membrane can be reused instantly without any rinse. More encouragingly, this method is applicable to other MOFs’ separation, like ZIF-8 and ZIF-67. This study further confirmed the potential and prospective of high-throughput production and facile separation of MOFs for practical applications.

WO3-x nanorods/rGO/AgBiS2 Z-scheme heterojunction with comprehensive spectrum response and enhanced Fenton and photocatalytic activities

Tetracycline (TC) antibiotics and dyes are the prevalent water contaminants, and their removal from the water through photocatalysis is a plausible approach. However, most semiconductors in their pristine form need to be improved to be exploited in photocatalysis owing to poor photoresponse, intense carrier recombination, and inertness without irradiation. Herein, we demonstrate the modification of defective WO3-x by rGO and AgBiS2 in the form of WO3-x/rGO/AgBiS2 (R2). It exploits the superior conductivity and synergism of rGO to inhibit carrier recombination; thereby, Z-scheme heterojunction with AgBiS2 provides high redox potential. Defects in WO3-x enable electron (e-) storage in R2, which decomposes H2O2 to generate ROS without irradiation. Owing to these essences and broad-spectrum response, it removed 93.72, 82.77, and 84.82% of TC during photo-Fenton (PFR), night-Fenton (NFR), and photocatalytic (PCR) reactions, respectively. Its removal rates reached 94.74, 81.54, and 87.50% against rhodamine B (RhB) during PFR, NFR, and PCR, respectively. It is superior to memory catalysis (MC) and conventional Fenton reactions (CFR) because it can perform without and with irradiation across a broader pH range. So, this work is conducive to designing WO3-x-based catalysts to combat environmental and energy crises.

NH2-MIL-101(Fe)-mediated photo-Fenton reaction enhanced simultaneous removal of nitrogen and refractory organics in anammox process through interfacial electron transfer

In this study, H2O2 (0.1 ‰) and NH2-MIL-101(Fe)-driven (150 mg/L) photo-Fenton-coupled anammox were proposed to simultaneously improve the removal efficiency of nitrogen and humic acid. Long-term experiments showed that the total nitrogen removal efficiency was increased by the photo-Fenton reaction to 91.9 ± 1.5 % by altering the bioavailability of refractory organics. Correspondingly, the total organic carbon removal efficiency was significantly increased. Microbial community analyses indicated that Candidatus_Brocadia maintained high activity during photo-Fenton reaction and was the most abundant genus in the reactor. Dissimilatory nitrate reduction to ammonium process and denitrification process were enhanced, resulting in reduced NO3–-N production. The establishment of electron transfer between microorganisms and NH2-MIL-101 (Fe) improved the charge separation efficiency of the quantum dots and increased the intracellular adenosine triphosphate content of anammox bacteria. These results indicated that photo-Fenton-anammox process promoted the removal of nitrogen and refractory organics in one reactor which had good economic value and application prospects.

Construction of site-specific magnetic Z-scheme CdS/Fe3O4@N-doped graphene aerogel microtube/N-doped TiO2 with porous structure: enhanced catalytic performance in photo-Fenton reaction.

The development of composite photocatalysts with high charge transfer efficiency, great visible light absorption, and quick recovery has aroused the interest of many researchers. Herein, based on the hydrothermal assisted vacuum freeze drying method, CdS, Fe3O4, and N-TiO2 were, respectively, fixed in the inner, middle, and outer layers of nitrogen-doped graphene aerogel for preparation of the site-specific magnetic porous Z-scheme CdS/Fe3O4@N-doped graphene aerogel microtube/N-doped TiO2 (CdS/Fe3O4@NGAM/N-TiO2) photocatalyst. For the composite, Fe3O4@NGAM carrier with porous and tubular structure not only helps the recycle and reactants/productions mass transport in the photocatalytic process but also ensures the well-steered transfer of electrons and holes from CdS and N-TiO2 in the Z-type heterojunction system, greatly improving the separation of photogenerated carriers. Besides, Fe3O4 can also work as a Fenton catalyst to activate hydrogen peroxide which is generated in situ by CdS. Thus, the CdS/Fe3O4@NGAM/N-TiO2 composite presents excellent degradation efficiencies towards methyl orange ((MO) 98% removal rate within 50min), bisphenol A ((BPA) 96% removal rate within 50min), tetracycline hydrochloride ((TCH) 96% removal rate within 120min) and strong stabilities after 6 cycles. The free radical removal experiments show that ·O2- and ·OH are the main active substances of catalysis, which further confirms the synergistic effect of photocatalysis and Fenton catalysis.

Construction of stable photo-Fenton system with efficient removal capability of ciprofloxacin by accelerating in-situ photoreduction of Fe3+ in MIL-100(Fe)

ABSTRACT Well-dispersed MIL-100(Fe) nanoparticles were synthesized under mild conditions and used to construct a photo-Fenton system (VMH system) with the assistance of visible-light irradiation and hydrogen peroxide. In such a VMH system, the MIL-100(Fe) has a high specific surface area and provides numerous Fe3+ active sites, thus accelerating the reaction of Fe3+ with photo-generated electrons under visible-light irradiation and generates Fe2+, and then the acquired Fe2+ can activate H2O2 to generate ⋅OH, accompanying with the oxidation of Fe2+ to Fe3+. Hence, the in-situ recycling of Fe2+/Fe3+ promotes the generation of ·OH, thus making the VMH system exhibits promising photocatalytic activity. The removal rate of ciprofloxacin in the VMH system is as high as 95.2% within 120 min photo-Fenton reaction, which is about 26 times higher than that of the Visible light/MIL-100(Fe) system. Moreover, the VMH system also exhibits strong degradation ability to other typical antibiotics, such as tetracycline, norfloxacin and cephalexin, and maintains high cyclic stability, revealing great practical application potential in the purification of antibiotic wastewater.

Improvement of ferrioxalate assisted Fenton and photo-Fenton processes for paracetamol degradation by hydrogen peroxide dosage.

This work aimed to investigate the impact of hydrogen peroxide (HP) punctual dosage on paracetamol (PCT) degradation, through Fenton and photo-Fenton processes under near-neutral pH conditions, using ferrioxalate and artificial sunlight. The assays were performed using a D-optimal experimental design, to statistically evaluate the influence of radiation (ON or OFF), HP concentration (94.5-756mg L-1), and HP dosage (YES or NO), on PCT conversion. The optimal conditions determined from the study were: HP = 378mg L-1, DOS = YES, and RAD = ON, achieving a predicted PCT conversion of 99.68% in 180min. This result obtained from the model was very close to the experimental one (98.80%). It was verified that HP dosage positively influenced the iron catalytic cycle since higher Fe2+ concentrations were reached at shorter reaction times, accelerating not only PCT conversion but also its by-products hydroquinone and 1,4-benzoquinone, leading to better performances of Fenton and photo-Fenton reactions. Under optimal conditions and employing real water matrices (an artificial matrix with inorganic anions, a real groundwater sample, and a synthetic industrial wastewater), HP dosage demonstrated the ability to mitigate the negative effects caused by the content of different ions and other organic compounds and significantly improve HP consumption in challenging wastewater conditions.

Photo-Fenton efficient degradation of organic pollutants over S-scheme ZnO@NH2-MIL-88B heterojunction established for electron transfer channel

Combining photocatalysts with Fenton technology can improve the catalytic properties of materials and achieve efficient degradation of organic pollutants. However, preparing low-cost catalysts using simple methods remains a challenge. This paper selected a more environmentally friendly and cost-effective semiconductor material, zinc oxide, for the modification of NH2-MIL-88B and prepared a new S-scheme heterojunction photo-Fenton catalyst ZnO@NH2-MIL-88B (ZMFe-x) by a simple solvothermal method. Moreover, the Zn-O-Fe bonds that were formed between the interfaces enabled a fast channel for the photoelectron transport that was created by photoexcitation from the ZnO conduction band to the NH2-MIL-88B valence band. This allowed the ZMFe-x catalysts to have better removal performance for organic pollutants in the photo-Fenton reaction. The dominating role of hydroxyl radicals in the degradation procedure was determined by ESR analysis and free radical trapping experiments, and the degradation mechanisms and pathway of contaminants were predicted by intermediate analysis and DFT calculations. This study provides a stable and effective new strategy for preparing MOFs catalysts for removing various pollutants.

Fe-doped g-C3N4 with duel active sites for ultrafast degradation of organic pollutants via visible-light-driven photo-Fenton reaction: Insight into the performance, kinetics, and mechanism

The photo-Fenton process provides a sustainable and cost-effective strategy for removing refractory organic contaminants in wastewater. Herein, a high-efficient Fe-doped g-C3N4 photocatalyst (Fe@CN10) with a unique 3D porous mesh structure was prepared by one-pot thermal polymerization for ultrafast degradation of azo dyes, antibiotics, and phenolic acids in heterogeneous photo-Fenton systems under visible light irradiation. Fe@CN10 exhibited a synergy between adsorption-degradation processes due to the co-existence of Fe3C and Fe3N active sites. Specifically, Fe3C acted as an adsorption site for pollutant and H2O2 molecules, while Fe3N acted as a photocatalytic active site for the high-efficient degradation of MO. Resultingly, Fe@CN10 showed a photocatalytic degradation rate of MO up to 140.32 mg/L min−1. The dominant ROS contributed to the removal of MO in the photo-Fenton pathway was hydroxyl radical (•OH). Surprisingly, as the key reactive species, singlet oxygen (1O2) generated from superoxide radical (•O2−) also efficiently attacked MO in a photo-self-Fenton pathway. Additionally, sponge/Fe@CN10 was prepared and filled in the continuous flow reactors for nearly 100% degradation of MO over 150 h when treating artificial organic wastewater. This work provided a facile route to prepare highly-active Fe-doped photocatalysts and develop a green photocatalytic system for wastewater treatment in the future.