Phosphate Buffer Research Articles

Anthraquinone/Activated Carbon Electrochemical Sensor and its Application in Ofloxacin Analysis

AbstractOfloxacin (OFL) has antibacterial and anti‐inflammatory effects on respiratory tract infection, skin soft tissue infection and urogenital tract infection caused by sensitive bacteria. In this study, an electrochemical sensor on account of glassy carbon electrode (GCE) and anthraquinone (AQ)/Vulcan XC‐72 (C) composite was prosperity prepared for the determination of ofloxacin (OFL) drug. The morphology and structure of C/20%AQ composites were characterized by SEM. The electrochemical behavior of OFL on the C/20%AQ/GCE sensor was tested using differential pulse voltammetry (DPV) and cyclic voltammetry (CV). The consequences indicate that the linear response of the sensor to OFL at pH 6.5 in 0.2 M phosphate buffer solution (PBS) was in the scope of 0.1–550.0 μM (R2=0.998) with the limit of detection of 0.01 μM. The prepared C/20%AQ/GCE sensor exhibited good anti‐interference ability and repeatability against OFL. The sensor presents a sensitive, simple and low cost OFL detection method, and has been successfully applied to real samples.

Aging-induced dysbiosis worsens sepsis severity but is attenuated by probiotics in D-galactose-administered mice with cecal ligation and puncture model.

Despite the well-established effects of aging on brain function and gut dysbiosis (an imbalance in gut microbiota), the influence of aging on sepsis-associated encephalopathy (SAE) and the role of probiotics in this context remain less understood. C57BL/6J mice (8-week-old) were subcutaneously administered with 8 weeks of D-galactose (D-gal) or phosphate buffer solution (PBS) for aging and non-aging models, respectively, with or without 8 weeks of oral Lacticaseibacillus rhamnosus GG (LGG). Additionally, the impact of the condition media from LGG (LCM) was tested in macrophages (RAW 264.7 cells), microglia (BV-2 cells), and hippocampal cells (HT-22 cells). Fecal microbiome analysis demonstrated D-gal-induced dysbiosis (reduced Firmicutes and Desulfobacterota with increased Bacteroidota and Verrucomicrobiota), which LGG partially neutralized the dysbiosis. D-gal also worsens cecal ligation and puncture (CLP) sepsis severity when compared with PBS-CLP mice, as indicated by serum creatinine (Scr) and alanine transaminase (ALT), but not mortality, neurological characteristics (SHIRPA score), and serum cytokines (TNF-α and IL-6). Additionally, D-gal-induced aging was supported by fibrosis in the liver, kidney, and lung; however, CLP sepsis did not worsen fibrosis. Interestingly, LGG attenuated all parameters (mortality, Scr, ALT, SHIRPA, and cytokines) in non-aging sepsis (PBS-CLP) while improving all these parameters, except for mortality and serum IL-6, in aging sepsis (D-gal CLP). For the in vitro test using lipopolysaccharide (LPS) stimulation, LCM attenuated inflammation in some parameters on RAW264.7 cells but not BV-2 and HT-22 cells, implying a direct anti-inflammatory effect of LGG on macrophages, but not in cells from the brain. D-gal induced fecal dysbiosis and worsened sepsis severity as determined by Scr and ALT, and LGG could alleviate most of the selected parameters of sepsis, including SAE. However, the impact of LGG on SAE was not a direct delivery of beneficial molecules from the gut to the brain but partly due to the attenuation of systemic inflammation through the modulation of macrophages.

Mechanical and suture-holding properties of a UV-cured atelocollagen membrane with varied crosslinked architecture.

The mechanical competence and suturing ability of collagen-based membranes are paramount in Guided Bone Regeneration (GBR) therapy, to ensure damage-free implantation, fixation and space maintenancein vivo. However, contact with the biological medium can induce swelling of collagen molecules, yielding risks of membrane sinking into the bone defect, early loss of barrier function, and irreversibly compromised clinical outcomes. To address these challenges, this study investigates the effect of the crosslinked network architecture on both mechanical and suture-holding properties of a new atelocollagen (AC) membrane. UV-cured networks were obtained via either single functionalisation of AC with 4-vinylbenzyl chloride (4VBC) or sequential functionalisation of AC with both 4VBC and methacrylic anhydride (MA). The wet-state compression modulus (Ec) and swelling ratio (SR) were significantly affected by the UV-cured network architecture, leading up to a three-fold reduction inSRand about two-fold increase inEcin the sequentially functionalised, compared to the single-functionalised, samples. Electron microscopy, dimensional analysis and compression testing revealed the direct impact of the ethanol series dehydration process on membrane microstructure, yielding densification of the freshly synthesised porous samples and a pore-free microstructure with increasedEc. Nanoindentation tests via spherical bead-probe Atomic Force Microscopy (AFM) confirmed an approximately two-fold increase in median (interquartile range) elastic modulus in the sequentially functionalised (EAFM= 40 (13) kPa), with respect to single-functionalised (EAFM= 15 (9) kPa), variants. Noteworthy, the single-functionalised, but not the sequentially functionalised, samples displayed higher suture retention strength (SRS= 28±2─35±10 N∙mm‑1) in both the dry state and following 1 hour in Phosphate Buffered Saline (PBS), compared to Bio-Gide®(SRS: 6±1-14±2 N∙mm‑1,p<0.05), while a significant decrease was measured after 24 hours in PBS (SRS= 1±1 N∙mm‑1). These structure-property relationships confirm the key role played by the molecular architecture of covalently crosslinked collagen, aimed towards long-lasting resorbable membranes for predictable GBR therapy.&#xD.

Hierarchical assembly and environmental enhancement of bacterial ice nucleators

Bacterial ice nucleating proteins (INPs) are exceptionally effective in promoting the kinetically hindered transition of water to ice. Their efficiency relies on the assembly of INPs into large functional aggregates, with the size of ice nucleation sites determining activity. Experimental freezing spectra have revealed two distinct, defined aggregate sizes, typically classified as class A and C ice nucleators (INs). Despite the importance of INPs and years of extensive research, the precise number of INPs forming the two aggregate classes, and their assembly mechanism have remained enigmatic. Here, we report that bacterial ice nucleation activity emerges from more than two prevailing aggregate species and identify the specific number of INPs responsible for distinct crystallization temperatures. We find that INP dimers constitute class C INs, tetramers class B INs, and hexamers and larger multimers are responsible for the most efficient class A activity. We propose a hierarchical assembly mechanism based on tyrosine interactions for dimers, and electrostatic interactions between INP dimers to produce larger aggregates. This assembly is membrane-assisted: Increasing the bacterial outer membrane fluidity decreases the population of the larger aggregates, while preserving the dimers. Inversely, Dulbecco's Phosphate-Buffered Saline buffer increases the population of multimeric class A and B aggregates 200-fold and endows the bacteria with enhanced stability toward repeated freeze-thaw cycles. Our analysis suggests that the enhancement results from the better alignment of dimers in the negatively charged outer membrane, due to screening of their electrostatic repulsion. This demonstrates significant enhancement of the most potent bacterial INs.

Single cell-inductively coupled plasma-mass spectrometry (SC-ICP-MS) reveals metallic heterogeneity in a macrophage model of infectious diseases.

Single cell-inductively coupled plasma-mass spectrometry (SC-ICP-MS) offers an attractive option for rapidly measuring trace metal heterogeneity at the single cell level. Chemical fixation has been previously applied to mammalian cells prior to sample introduction so that they can be resuspended in a solution suitable for SC-ICP-MS. However, the effect of fixation on the elemental composition of suspended cells is unknown, and robust methodologies are urgently needed so that the community can measure the effects of intracellular pathogens on elemental composition of their host cells. We demonstrate that different fixatives impact measured cell elemental composition. We have compared suspensions treated using different fixatives (methanol 60-100% in H2O and 4% paraformaldehyde in phosphate-buffered saline solution), and the number of distinguishable single cell events, keeping a constant particle number concentration. Significantly more single cell events (n = 3, P ≤ 0.05) were observed for Ca and Mg when cells were fixed in 4% paraformaldehyde than for the methanol-based fixatives, confirming the hypothesis that methanol fixatives cause leaching of these elements from the cells. The impact of fixation on Mn and Zn was less pronounced. Microbial and viral infection of eukaryotic cells can have profound effects on their elemental composition, but chemical fixation is necessary to render infected cells safe before analysis. We have successfully applied our methodology to a macrophage model of tuberculosis demonstrating utility in understanding metal homeostasis during microbial infection of mammalian cells.

Renewable Photo-Cross-Linkable Polyester-Based Biomaterials: Synthesis, Characterization, and Cytocompatibility Assessment.

The present work consist of the synthesis of photo-cross-linkable materials, based on unsaturated polyesters (UPs), synthesized from biobased monomers from renewable sources such as itaconic acid and 1,4-butanediol. The UPs were characterized to assess the influence of polycondensation reaction temperature and cross-linking time on their final properties. For this purpose, different UV irradiation exposure periods were tested. Homogeneous, uniform, and transparent films were obtained after 1, 3, and 5 min of UV exposure. These cross-linked films were then characterized. All materials presented high gel content, which was dependent on the reaction's temperature. The thermal behaviors of the UPs were shown to be similar. In vitro hydrolytic degradation tests showed that the materials can undergo degradation in phosphate-buffered saline (PBS) at pH 7.4 and 37 °C, ensuring their biodegradability over time. Finally, to assess the applicability of the polyesters as biomaterials, their cytocompatibility was determined by using human dermal fibroblasts.

Mechanistic insights into multimetal synergistic and electronic effects in a hexanuclear iron catalyst with a [Fe3(μ3-O)(μ2-OH)]2 core for enhanced water oxidation.

Multinuclear molecular catalysts mimicking natural photosynthesis have been shown to facilitate water oxidation; however, such catalysts typically operate in organic solutions, require high overpotentials and have unclear catalytic mechanisms. Herein, a bio-inspired hexanuclear iron(III) complex I, Fe6(μ3-O)2(μ2-OH)2(bipyalk)2(OAc)8 (H2bipyalk = 2,2'-([2,2'-bipyridine]-6,6'-diyl)bis(propan-2-ol); OAc = acetate) with desirable water solubility and stability was designed and used for water oxidation. Our results showed that I has high efficiency for water oxidation via the water nucleophilic attack (WNA) pathway with an overpotential of only ca. 290 mV in a phosphate buffer of pH 2. Importantly, key high-oxidation-state metal-oxo intermediates formed during water oxidation were identified by in situ spectroelectrochemistry and oxygen atom transfer reactions. Theoretical calculations further supported the above identification. Reversible proton transfer and charge redistribution during water oxidation enhanced the electron and proton transfer ability and improved the reactivity of I. Here, we have shown the multimetal synergistic and electronic effects of catalysts in water oxidation reactions, which may contribute to the understanding and design of more advanced molecular catalysts.

Highly Sensitive Electrochemiluminescence Biosensing Method for SARS-CoV-2 N Protein Incorporating the Micelle Probes of Quantum Dots and Dibenzoyl Peroxide Using the Screen-Printed Carbon Electrode Modified with a Carboxyl-Functionalized Graphene.

Obtaining stable electrochemiluminescence (ECL) emissions from a hydrophobic luminophore in aqueous solutions and designing a method without the use of an exogenous coreactant are promising for ECL biosensing. Here, a highly sensitive signal-on ECL immunoassay for the SARS-CoV-2 N protein was developed using micelles as an ECL tag. The micelles were prepared by coencapsulating the luminophore hydrophobic CdSe/ZnS quantum dots and coreactant dibenzoyl peroxide within the hydrophobic core of micelles. The ECL probe was obtained by covalently bonding a SARS-CoV-2 N protein-binding aptamer onto the micelle surface. The construction of the immunosensor was initiated by the immobilization of the anti-SARS-CoV-2 N protein antibody onto the screen-printed carbon electrode (SPCE) with a -COOH-functionalized surface. The surface functionalization of SPCEs was achieved through paste-exfoliated graphene, which was modified with a -COOH group through supramolecular-covalent scaffolds on SPCE. Upon achieving sandwich complexes on the immunosensor, an efficient ECL signal response at -1.4 V versus Ag/AgCl was obtained in phosphate buffer solution. The ECL assay was used for the sensitive determination of SARS-CoV-2 N protein with the linear range from 0.01 to 50 ng mL-1, and the detection limit was 3.0 pg mL-1. The immunosensor showed good reproducibility and stability, and the ECL immunoassay was used to determine the SARS-CoV-2 N protein in serum samples. The proposed approach to obtain micelles is versatile for the preparation of stable ECL luminophores by using hydrophobic materials, and the strategy provides an alternative for ECL bioassays based on the coreactant route.

Modulating the Anticancer Activity of Square‐Planar Platinum (II) Complex by Its Chelated Diphosphine

ABSTRACTThis work reports the preparations and anticancer activities of a set of platinum (II) complexes. Two types of bidentate ligands, azadiphosphine (PNP) and diphosphine (PP), were applied to afford different kinds of platinum centers, the homoleptic complexes, [Pt (PNP)2]2+ (1 and 2) and [Pt (PP)2]2+ (4), and the hybrid complex, [Pt (PNP)(PP)]2+ (3). All these complexes are characterized by various analytical techniques, and their structures were validated using single‐crystal X‐ray diffraction analysis. Notably, the stability of the complexes 1–4 is differentiated both in phosphate‐buffered saline (PBS) and in the culture media (RPMI‐1640), relative to the type of coordinated diphosphine ligands, specifically, the more PNP ligands, the less stability. The bite angles of P‐Pt‐P bonds in 1–4 would be reliant on their stability, so that complexes 1 and 2 with small bite angles tend to be labile. A mechanistic understanding on the decomposition of 2 is proposed with the aid of mass analysis. As a result, their anticancer activities should be also associated with their stability so that the chelated ligands, with more PNP ligands, lead to more cytotoxicity. Mechanistically, the poisonous platinum (II) derivatives of complex 2 should interact with the nucleus DNA, whereas the intact complex 4 is not traceable, confirming from a γ‐H2AX‐related immunofluorescence staining kit. Additionally, complex 2 exhibits severe toxicity toward several cancer cells as well as a normal cell. Furthermore, complex 2 has inhibited the formation and viability of three‐dimensional T24 mammospheres, reminding it of a promising candidate for anticancer treatments. Overall, the present work provides a way for the systematic investigation to elucidate how a bidentate diphosphine ligand modulates the stability and the anticancer activities of the corresponding square‐planner platinum (II) complex.

The Utilization of Central Composite Design for the Production of Hydrogel Blends for 3D Printing

Central composite design (CCD) is a statistical experimental design technique that utilizes a combination of factorial and axial points to study the effects of multiple variables on a response. This study focused on optimizing hydrogel formulations for 3D printing using CCD. Three biopolymers were selected: sodium alginate (SA), gelatin (GEL), and carboxymethyl cellulose (CMC). The maximum and minimum concentrations of each polymer were established using a Google Scholar search, and CCD was employed to generate various combinations for hydrogel preparation. The hydrogels were characterized in accordance with their swelling degree (SD) in phosphate-buffered saline (PBS) and Dulbecco’s Modified Eagle Medium (DMEM), as well as their printability in 2D and 3D assays. The formulation consisting of 7.5% SA, 7.5% GEL, and 2.5% CMC exhibited the best swelling properties and exceptional printability, surpassing all other tested formulations. This study highlights the effectiveness of design of experiment methodologies in accelerating the development of optimized hydrogel formulations for various applications in 3D printing and suggests avenues for future research to explore their performance in specific biological contexts.

Real-Time 3D Imaging and Inhibition Analysis of Human Serum Amyloid A Aggregations Using Quantum Dots.

Serum amyloid A (SAA) is one of the most important precursor amyloid proteins discovered during the study of amyloidosis, but its underlying aggregation mechanism has not yet been well elucidated. Since SAA aggregation is a key step in the pathogenesis of AA amyloidosis, amyloid inhibitors can be used as a tool to study its pathogenesis. Previously, we reported a novel microliter-scale high-throughput screening (MSHTS) system for screening amyloid β (Aβ) aggregation inhibitors based on quantum dot (QD) fluorescence imaging technology. In this study, we report the aggregation of human SAA (hSAA) in phosphate-buffered saline, in which we successfully visualized hSAA aggregation by QD using fluorescence microscopy and confocal microscopy. Two-dimensional and three-dimensional image analyses showed that most aggregations were observed at 40 μM hSAA, which was the optimal aggregation concentration in vitro. The accuracy of this finding was verified by a Thioflavin T assay. The transmission electron microscopy results showed that QD uniformly bound to hSAA aggregation. hSAA aggregation inhibitory activity was also evaluated by rosmarinic acid (RA). The results showed that RA, which is a compound with high inhibitory activity against Aβ aggregation, also exhibited high inhibitory activity against 40 μM hSAA. These results indicate that the MSHTS system is an effective tool for visualizing hSAA aggregation and for screening highly active inhibitors.

Electrochemical DNA Sensor Based on Poly(proflavine) Deposited from Natural Deep Eutectic Solvents for DNA Damage Detection and Antioxidant Influence Assessment

Electrochemical DNA sensors for DNA damage detection based on electroactive polymer poly(proflavine) (PPFL) that was synthesized at screen-printed carbon electrodes (SPCEs) from phosphate buffer (PB) and two natural deep eutectic solvents (NADESs) consisting of citric or malonic acids, D-glucose, and a certain amount of water (NADES1 and NADES2) were developed. Poly(proflavine) coatings obtained from the presented media (PPFLPB, PPFLNADES1, and PPFLNADES2) were electrochemically polymerized via the multiple cycling of the potential or potentiostatic accumulation and used for the discrimination of thermal and oxidative DNA damage. The electrochemical characteristics of the poly(proflavine) coatings and their morphology were assessed using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM). The working conditions for calf thymus DNA implementation and DNA damage detection were estimated for all types of poly(proflavine) coatings. The voltammetric approach made it possible to distinguish native and chemically oxidized DNA while the impedimetric approach allowed for the successful recognition of native, thermally denatured, and chemically oxidized DNA through changes in the charge transfer resistance. The influence of different concentrations of conventional antioxidants and pharmaceutical preparations on oxidative DNA damage was characterized.

Facile Synthesis and Characterization of Fluorescent Polystyrene Nanospheres for Homogeneous Light-Initiated Chemiluminescence Immunoassay.

Homogeneous light-initiated chemiluminescence technology (LICA) is widely used in clinical diagnostics due to the advantages of high sensitivity, minimal reagent usage, and no need for washing. Luminescent microspheres receive singlet oxygen emitted by photosensitive microspheres to generate optical signals. Therefore,1O2-initiated luminescent nanospheres are crucial, but there are few reports on the preparation of 1O2-initiated luminescent nanospheres. Herein, monodisperse luminescent Eu/C-28@PS (Eps) nanospheres were prepared and optimized using chelate Eu (TTA)3phen and 4-(2-phenyl-5,6-dihydro1,4-oxathiin-3-yl)-N, N-ditetradecylbenzenamine (C-28) as probe dye via THF/water swelling-shrinking procedure. Various swelling parameters were studied to obtain the swelling conditions that produce the minimum particle size and narrow size distribution, which shows good results in uniform particle size distribution (~ 250nm, a PDI of 0.03), surface carboxylate content (1.18mmol/g), and BSA loading capability (129.8mg/g) in the case of 20mg total probe dosage and 2h of incubation at 40°C using 14% THF/water mixture as a co-solvent system. The composition of the entrapped probe has a gain effect on the 1O2-initiated fluorescent signal and the optimal ratio of Eu (TTA)3phen: C-28 (1:1) was obtained on a commercial analyzer using IgG and anti-human IgG as models in PBS buffer. These results indicate that monodisperse luminescent Eps nanospheres are suitable as light-initiated chemiluminescence sensors and have great application potential in early detection, screening tests, and prognostic evaluation of patients.

Ultrasound-Responsive Hydrogel Incorporated with TGF-β Mimetic Peptides for Endometrium Recovery to Restore Fertility.

Unavoidable damage to the basal layer of the endometrium has a huge negative impact on a woman's reproductive health and menstrual cycle. However, it is difficult for medicine to penetrate a series of biological barriers toward the basal layer in the deeper area of the endometrium. To meet this challenge, we developed an ultrasound-responsive hydrogel incorporated with a transforming growth factor-beta (TGF-β) mimetic peptide to enhance pregnancy outcomes by restoring the function of a wounded endometrium due to its deep-tissue-penetration capability. In vitro studies revealed that the TGF-β-mimetic-peptide-loaded hydrogel could achieve 64.35% of cell migration under ultrasound stimulation even in phosphate-buffered saline of pH 6.0. Upon in situ sonication at the uterus, carboxymethyl chitosan can be released from degraded hydrogel to open tight junctions with reduced interstitial pressure by ultrasound to promote deep penetration. Rat studies revealed that the penetration capability of TGF-β-mimetic-peptide-loaded hydrogel with sonication was 1.6 times higher than that of the control group. Besides the rat uterine model, ex vivo human uterine tissue was also collected and imaged, demonstrating up to ∼700 μm of tissue penetration depth. In addition, compared to control groups, effective uterus recovery without intrauterine stenosis and endometrial cavity fluid was observed from rats with severe uterine injury treated by TGF-β-mimetic-peptide-loaded hydrogel. In addition, fertility restoration in the endometrial injury model was observed after treatment with such an ultrasound-responsive hydrogel incorporated with TGF-β mimetic peptides. Overall, this work provides an effective approach to treating endometrial injury for enhanced pregnancy outcomes.

In Silico Analysis of Binding Sites for a Novel ssDNA Aptamer Specific to Verrucarin A and Detection in Dust Extracts.

An aptamer is a single-stranded oligonucleotide that serves as a chemical antibody with a high specificity and binding affinity that can recognize a wide range of molecules. Effective modification and truncation of aptamers can enhance their binding affinities to particular targets while also broadening their application for uses, such as biosensors. However, a conventional trial-and-error methodology hinders this process. Herein, we demonstrate an in silico method to elucidate the binding site of single-stranded DNA aptamer specific to verrucarin A, a mycotoxin produced by molds in indoor buildings that causes adverse effects in living organisms. The novel ssDNA aptamer exhibited a binding affinity of 29.5 nM, demonstrating a relatively strong affinity compared to those of previously reported typical aptamers for small molecules. Furthermore, the selected aptamer was highly specific toward verrucarin A among structurally related mycotoxins (i.e., verrucarol and zearalenone). The specific binding site of the aptamer predicted via molecular dynamics and molecular docking simulations was highly consistent with the results observed via truncation, single base mutation, and circular dichroism experiments. The fluorescence assay revealed limits of detection and quantification of 4.1 and 12 nM for the aptamer, respectively. Comparing our developed aptasensor with LC-MS/MS methodology revealed that it could detect verrucarin A levels in phosphate-buffered saline and dust extracts with robust precision and consistency. Our findings provide insight for future studies exploring interaction mechanisms with intended targets and practical sensing applications, such as point-of-care detection of verrucarin A.

Improvement of Thermo-Stability and Solvent Tolerant Property of Streptomyces sp. A3301 Lipase by Immobilization Techniques with Application in Poly (lactic acid) Polymerization by Using Biological Process

The thermo-solvent-tolerant lipase-producing actinomycete, Streptomyces sp. A3301, was utilized as a biocatalyst for poly (lactic acid) or PLA polymerization. The study aimed to optimize lipase immobilization conditions, characterize the immobilized lipase and apply it for PLA polymerization. The results showed using a sponge as the immobilizing matrix was the most effective method, achieving a maximum activity of 277 U/g of sponge. The optimal sponge size was determined to be 0.125 cm³ and pre-soaking the sponge in 0.1 M phosphate buffer at pH 7.0 for 24 h before use proved advantageous. Immobilization significantly enhanced the thermo-stability of the enzyme, with a relative activity ranging from 140 to 190 % within the temperature range of 30 to 60 °C. In contrast, the crude lipase exhibited thermo-stability only within the 30 - 50 °C range. The immobilized lipase demonstrated stability under PLA polymerization conditions, which involved a reaction mixture containing toluene and lactic acid and performed at 60 °C for 8 h. The immobilized lipase maintained its activity under this condition for 5 h, retaining a relative activity of 230 %, which was 1.2 times higher than the activity of the crude lipase. When the immobilized lipase was used in PLA polymerization, the resulting PLA product exhibited a molecular weight of 5,333 ± 0.02 Da, and the degree of polymerization was approximately 72. These findings underscore the potential of the immobilization technique to enhance lipase activity for PLA polymerization. HIGHLIGHTS PLA polymerization via a biological process is demonstrated. PLA can be polymerized by enzyme lipase produced by Streptomyces sp. A3301. Improving PLA polymerization with enzyme immobilization techniques. Sponge is the best immobilizer for PLA polymerization. PLA can be synthesized under mild conditions. GRAPHICAL ABSTRACT

Continuous flow microfluidic system with magnetic nanoparticles for the spectrophotometric quantification of urea in urine and plasma samples.

Urea, synthesized exclusively in the liver, is primarily transported through the bloodstream to the kidneys, where it is excreted in urine, accounting for 80-90% of nitrogen excretion in humans. Elevated blood urea levels, indicative of kidney dysfunction, make it a crucial biomarker for assessing renal function. Previous studies on urea detection using microdevices have largely focused on conductometric methods. In this study, we demonstrated the application of a continuous flow miniaturized system for rapid spectrophotometric urea quantification using polydimethylsiloxane (PDMS) microdevices. The microdevice featured two distinct zones: an enzymatic reaction zone, where urease-conjugated magnetic nanoparticles were immobilized, and a detection zone, where reagents were incorporated to produce a colored reaction product via a modified Berthelot reaction. Integrating magnetic nanoparticles as a solid support for the enzyme enabled the reuse of PDMS microdevices without compromising the analytical signal. Spectrophotometric detection was performed in an additional microdevice acting as a microflow cell coupled with optical fibers. A calibration curve was constructed using urea standards diluted in phosphate buffer solution (PBS), yielding a linear range of 0.12-3.00 mg dL-1. The method demonstrated detection and quantification limits of 0.04 mg dL-1 and 0.12 mg dL-1, respectively. Precision and accuracy assessments yielded a repeatability of 0.90% and intermediate precision of 4.52%, with recovery rates near 100%. The method was applied to plasma and urine samples, showing urea concentrations within normal physiological ranges and an analysis throughput of 36 measurements per hour.

Respiratory Delivery of Lacticaseibacillus rhamnosus GG by Vibrating-Mesh and Jet Nebulisation

Background: The use of probiotic bacteria to improve lung health has been gaining interest. Although the oral delivery of probiotics and their effects are well documented, there is currently limited knowledge on the respiratory delivery of probiotics. Objectives: This study aimed to investigate whether nebulisation is suitable for delivering Lacticaseibacillus rhamnosus GG (LGG) into the lungs for the potential treatment of bacterial pulmonary infections. Methods: It compared the dose output and aerosol performance of a vibrating-mesh nebuliser (VMN) and a jet nebuliser (JN) in nebulising LGG suspended in de Man Rogosa Sharpe (MRS) broth, phosphate-buffered saline (PBS), or normal saline (0.9% w/v sodium chloride in water). Results: The VMN consistently produced a higher output than the JN for all liquid media, indicating that VMN was more efficient. The fine-particle fractions of both nebulisers were comparable for a given medium. The highest fine-particle fraction was achieved with LGG suspended in MRS broth for both nebulisers (20.5 ± 2.8% for VMN; 18.7 ± 3.4% for JN). This suggests that the aerosol performance of nebulised probiotics may depend on the medium in which the probiotic bacteria were suspended. Conclusions: Therefore, this study demonstrated that the nebulisation efficiency of LGG depended on the nebuliser type and liquid medium of the probiotic suspension.

Non-destructive viability assessment of cancer cell spheroids using dynamic optical coherence tomography with trypan blue validation

3D cell cultures are widely used in biomedical research for the recapitulation of in vivo microenvironments. Viability assessment and monitoring of these intricate conformations remain an open problem as standard cell viability protocols based on colorimetry or microscopy are not directly applicable to intact 3D samples. Optical coherence tomography (OCT) has been explored extensively for subsurface structural and quasi-functional analysis of 3D cell cultures and tissue. Recent studies of dynamic OCT as a source of cellular contrast have found qualitative associations with necrosis in cell spheroids, suggesting potential as a viability marker. We present empirical and validated evidence for dynamic OCT as a quantitative indicator of cell viability in 3D cultures. We analysed over 240 MCF-7 cancer cell spheroids with dynamic OCT and corresponding viability measurements using the trypan blue exclusion assay. Significant effects of common reagents dimethyl sulfoxide (DMSO) and phosphate-buffered saline (PBS) on OCT readouts were noted. We proposed a regression-based OCT brightness normalisation technique that removed reagent-induced OCT intensity biases and helped improve correspondence to the viability assay. These results offer a quantitative biological foundation for further advances of dynamic OCT as a novel non-invasive modality for 3D culture monitoring.

Cystatin C alleviates unconjugated bilirubin-induced neurotoxicity by promoting bilirubin clearance from neurocytes via exosomes, dependent on hepatocyte UGT1A1 activity.

There is an urgent need to identify effective drugs for the treatment of nerve injury caused by unconjugated bilirubin (UCB). Our previous research found that cystatin C (CST3) alleviates UCB-induced neurotoxicity by promoting autophagy in nerve cells, but that autophagy inhibitors did not completely inhibit the effects of CST3. This study investigated whether CST3 could alleviate the neurotoxicity of UCB by promoting the secretion and transport of exosomes containing UCB to the liver for metabolism. It demonstrated that hyperbilirubinemia mice treated with CST3 had a higher number of serum exosomes than those in hyperbilirubinemia mice treated with phosphate-buffered saline. CST3-mediated protection against UCB-induced damage was abolished when autophagy and extracellular vesicle inhibitors were used in combination. The number of exosomes in the CST3 overexpression group was higher than that in the control group. Molecular docking experiments showed that UCB and CST3 had high docking score (-8.2). These results suggest that UCB may be excreted from cells by exosomes, and CST3 may promote this process by binding to UCB and entering the exosomes. We demonstrated that the effect of CST3 relied on liver cells with normal UDP-glucuronyl transferase1A1 (UGT1A1) activity in a coculture system of HT22 and L02 cells. CST3 levels were lower in exosomes secreted by L02 cells than in those secreted by human umbilical vein endothelial cells (HUVECs), whereas CST3 levels were higher in the culture supernatants of L02 cells than in the culture supernatants of HUVECs. This suggests that UCB exosomes in L02 cells may be released and internalized by CST3 and that UCB is then processed by UGT1A1 to conjugate UCB, thus reducing its toxicity. These results suggest that CST3 might alleviate UCB-induced neurotoxicity by promoting the clearance of UCB from cells via exosomes and that these effects are dependent on UGT1A1 activity in liver cells.