Phasor Measurement Unit Data Research Articles

A two-stage subsynchronous oscillation assessment method for DFIG-based wind farm grid-connected system

In the power system, the wind farm based on Doubly-Fed Induction Generator (DFIG) may lead to Subsynchronous Oscillation (SSO), which poses a challenge to the stability of the power grid. In order to accurately evaluate SSO, this paper proposes a new evaluation method. It is divided into two main stages: firstly, the interference level of Phasor Measurement Unit (PMU) data is identified by using the classification model based on Upper Confidence Bound (UCB) and Double Deep Q Network (DDQN). Then, an SSO parameter estimation model based on Local Feature Fusion Transformer (LFF-Transformer) network is designed for data with different interference levels. Experimental results show that the errors of eRMSE-f and EMAPE-F are 0.001 and 0.003 respectively, and the errors of eRMSE-δ and EMAPE-δ are 0.009 and 0.015 respectively. In terms of training and testing time, this method is 90 s and 18 s respectively, which is significantly better than Multi-SVR and Multi-CNN. After application, the frequency deviation decreased from 0.05 to 0.02 Hz, the voltage deviation decreased from 3.5 to 1.5%, the power fluctuation decreased from 10 to 5 MW, the SSO frequency decreased from 1.5 Hz to less than 0.5 Hz, and the SSO damping ratio increased from 0.08 to 0.15. This shows that the proposed method effectively increases the stability of the power grid.

Support Vector Machine based Data Hacking Prediction using PMU Data

As global reliance on power systems grows due to increasing energy demands and modern consumption patterns, maintaining the stability and reliability of the power grid has become crucial. Power systems are complex and nonlinear, and their operations are continuously evolving, making it difficult and expensive to ensure stability. Traditionally, power systems are designed to handle a single outage at a time. However, recent years have seen several significant blackouts, each originating from a single failure, which have been extensively reported. These reports are vital for mitigating operational risks by strengthening systems against identified high-risk scenarios. While extensive research has been conducted on these blackouts, cyber- attacks introduce a new dimension of risk. The advent of Phasor Measurement Units (PMUs) has enabled centralized monitoring of power system data, allowing for more effective fault and cyber-attack detection.This paper proposes a machine learning-based approach to detecting cyber-attacks using PMU data. Given the complexity and volume of power system data, traditional mathematical and statistical methods are challenging to implement. Instead, a Support Vector Classification (SVC) algorithm is used for binary classification, distinguishing between 'attack' and 'normal' states. The algorithm is trained on PMU data and evaluated using metrics such as the AUC-ROC curve and confusion matrix, achieving an 82% AUC- ROC score, demonstrating its effectiveness in identifying cyber- attacks.

Fault classification and localization of multi-machine-based ieee benchmark test case power transmission lines using optimizable weighted extreme learning machine

Accurate fault diagnosis in transmission lines is crucial to ensure the reliability and stability of power grids. Conventional approaches often rely on expert knowledge or complex feature extraction methods, which are subjective and time-consuming. Additionally, many existing approaches use separate sub-algorithms for fault classification and localization. These are operating independently and sequentially. This research work proposes an innovative method for fault classification and localization in transmission lines using phasor measurement unit (PMU) data. The proposed method employs a Weighted Extreme Learning Machine (WELM) algorithm, which uses the variable data distribution across different fault classes through a weighted approach. The PMU data is generated by simulation using an IEEE 9-bus test system in the MATLAB simulation environment. The Maximal Overlap Discrete Wavelet Transform-based feature extraction technique is applied to derive input feature data to facilitate fault classification and localization. The WELM classifier is also optimized using the Grey Wolf Optimization (GWO) algorithm. The resulting GWO-optimized WELM (GWO-WELM) model, when trained on PMU data, achieves a remarkable fault classification accuracy of 99.83 % and fault localization accuracy of 95.48 %, respectively. These results demonstrate that the GWO-WELM model outperforms commonly used classifiers. Moreover, the proposed model shows robustness by accurately classifying the noisy data with a signal-to-noise ratio (SNR) of 10 dB (achieving 91.5 % accuracy in classification and 88.1 % accuracy in localization, respectively).

Complex plane based adaptive method for protection of series compensated transmission line using phasor measurement unit data

Though differential relays are preferred for the protection of series-compensated transmission line (SCTL), they may mal-operate during current inversion, high resistance internal faults and current infeed/outfeed situations. Therefore, a new protection scheme for SCTL using Phasor Measurement Unit data, that adaptively manages the operating region in the current ratio complex plane according to the percentage compensation level, is presented. Boundaries of the operating region are determined adaptively based on the estimated impedance value of the series compensation. Usefulness of the technique is confirmed by generating cases covering wide range of fault parameters, compensation level, and load angle on an existing 400 kV Indian SCTL using PSCAD software as well as through Hardware in Loop simulation employing the Real Time Digital Simulator. Reported outcomes reveal the ability of the suggested algorithm in sensing all types of internal faults. Its performance remains unaffected during current/voltage inversion, operation of MOV and/or airgap during high fault current conditions, current infeed/outfeed situation, and external fault with current transformer saturation condition. Impact of the presence of noise in the acquired signals is also analyzed. The suggested technique is applicable for SCTLs having different voltage levels and power flow conditions. The proposed method has higher responsiveness during high resistance internal faults up to 500 Ω and better steadiness during external faults compared to numerous prevailing methods.

An online dynamic security assessment integrated scheme for power systems based on sparse multinomial naive bayes and canonical correlation forest

With the expansion of power systems and renewable energies, the security of power systems is confronted with severe situations. In this research, an online integrated DSA scheme based on sparse multinomial naive Bayes (SMNB) and canonical correlation forest (CCF) is proposed. The SMNB-based feature selection process selects the key features according to the correlations between the system operating variables and the DSA classification labels. Then, the DSA model is obtained by training CCFs with the key features. Finally, the results of DSA can be provided by the model on the basis of the real-time data of phasor measurement units (PMUs) in the wide area measurement system (WAMS). The online DSA integrated scheme is tested on the IEEE 39-bus system and a practical 1648-bus system provided by PSS/E software. The test results show that the proposed scheme is suitable for online application with providing satisfactory assessment accuracy. Furthermore, topology change, data noise and missing data are also taken into account for the robustness tests of the integrated scheme.

AM-HNN based real-time voltage estimation method of distribution network using joint PMU and AMI data

A large amount of distributed energy access increases the risk of voltage fluctuation and off-limit voltage. Accurate voltage estimation is more and more important to ensure the safety of distribution networks. With the introduction of phasor measurement unit (PMU), multi-source measuring data with different time scales and measuring precision exist in distribution networks. How to fully integrate multi-source measurement data to achieve fast and accurate state estimation of distribution networks is an important prerequisite for efficient operation decision making. In this paper, a distribution network voltage state estimation method based on AM-HNN model is proposed. The attentional mechanism (AM) is introduced to mine the influence of PMU measurement data on voltage state estimation, and the feature weight is modified adaptively. The highway neural network (HNN) was used to fit the mapping relationship between the injected power of grid nodes and the voltage of key nodes. Taking the distribution network data of different scenes as an example, the superiority of the proposed optimal measurement model is verified by comparing with various voltage estimation methods.

Power System State Estimation Based on Fusion of PMU and SCADA Data

This paper introduces a novel hybrid filtering algorithm that leverages the advantages of Phasor Measurement Units (PMU) to address state estimation challenges in power systems. The primary objective is to integrate the benefits of PMU measurements into the design of traditional power system dynamic estimators. It is noteworthy that PMUs and Supervisory Control and Data Acquisition (SCADA) systems typically operate at different sampling rates in power system estimation, necessitating synchronization during the filtering process. To address this issue, the paper employs a predictive interpolation method for SCADA measurements within the framework of the Extended Kalman Filter (EKF) algorithm. This approach achieves more accurate estimates, closer to real observation data, by averaging the KL distribution. The algorithm is particularly well-suited for state estimation tasks in power systems that combine traditional and PMU measurements. Extensive simulations were conducted on the IEEE-14 and IEEE-30 test systems, and the results demonstrate that the fused estimator outperforms individual estimators in terms of estimation accuracy.

Fisher matrix based fault detection for PMUs data in power grids

In this paper, using the data collected from phasor measurement units (PMUs), two methods based on Fisher random matrix are proposed to detect faults in power grids. Firstly, the fault detection matrix is constructed and the event detection problem is reformatted as a testing problem for two-sample covariance matrices, which is related with the so-called Fisher matrix. To save computing resources, the screening step of fault interval based on the test statistic is designed to check the existence of faults. Then two point-by-point methods are proposed to determine the time of the fault in the selected interval. One method detects faults by the limiting spectral distribution of the standard Fisher matrix, which can detect the faults with higher accuracy. The other method tests the faults based on the proposed test statistic , which has a faster detection speed. Compared with existing works, the simulation results illustrate that two methods proposed in this paper cost less computational time and provide a higher degree of accuracy and sensitivity.

PmuBAGE: The Benchmarking Assortment of Generated PMU Data for Power System Events

This paper introduces two contributions - a generative architecture called pmuGE (phasor measurement unit Generator of Events), and a dataset generated by pmuGE called pmuBAGE (the Benchmarking Assortment of Generated PMU Events). The architecture, pmuGE, is one of the first data-driven generative models for power system event data. The dataset, pmuBAGE, is a high quality dataset trained on thousands of actual events using the pmuGE architecture. The dataset consists of almost 1000 instances of labeled event data to encourage benchmark evaluations on phasor measurement unit (PMU) data analytics. PMU data are challenging to obtain, especially those covering event periods. Nevertheless, power system problems have recently seen phenomenal advancements via data-driven machine learning solutions. A highly accessible standard benchmarking dataset would enable a drastic acceleration of the development of successful machine learning techniques in this field. We propose a novel learning method based on the Event Participation Decomposition of Power System Events, which makes it possible to learn a generative model of PMU data during system anomalies. The model can create highly realistic event data without compromising the differential privacy of the PMUs used to train it. The dataset is available online for any researcher or practitioner to use at the pmuBAGE <uri xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">https://github.com/NanpengYu/pmuBAGE</uri> Github Repository.

Noise Resilient Learning for Attack Detection in Smart Grid PMU Infrastructure

Falsified data from compromised Phasor Measurement Units (PMUs) in a smart grid induce Energy Management Systems (EMS) to have an inaccurate estimation of the state of the grid, disrupting various operations of the power grid. Moreover, the PMUs deployed at the distribution layer of a smart grid show dynamic fluctuations in their data streams, which make it extremely challenging to design effective learning frameworks for anomaly based attack detection. In this paper, we propose a noise resilient learning framework for anomaly based attack detection specifically for distribution layer PMU infrastructure, that show real time indicators of data falsifications attacks while offsetting the effect of false alarms caused by the noise. Specifically, we propose a feature extraction framework that uses some Pythagorean Means of the active power from a cluster of PMUs, reducing multi-dimensional nature of the PMU data streams via quick big data summarization. We also propose a robust and noise resilient methodology for learning thresholds based on generalized robust estimation theory of our invariant feature. We experimentally validate our approach and demonstrate improved reliability performance using two completely different datasets collected from real distribution level PMU infrastructures.

Исследование точности определения места повреждения воздушных линий по данным от устройств синхронизированных векторных измерений различных классов и производителей

The technology of synchronized phasor measurements has been widely used in the Russian power system to analyze the parameters of steady-state electrical power modes and to record electro-mechanical transient processes. Issues on fault location based on synchronized phasor measurements have mainly been discussed in foreign publications. A significant drawback of most research papers on this issue is simplified modeling of both overhead lines and current and voltage measurement channel as well as digital filters of phasor measurement units (PMUs). The goal of this research is to develop a fault location algorithm based on synchrophasor measurements and to study its accuracy by using specialized equipment including a real-time digital simulator (RTDS), PONOVO current and voltage amplifiers and production-grade PMUs. A PMU-based double-ended fault location algorithm is developed using long-line equations and well-known electromagnetic transient theory concepts. Currents and voltage oscillograms of both overhead transmission line ends are modelled in the MATLAB/Simulink software package. These oscillograms are saved as COMTRADE files and played back using the RTDS hardware and all-in-one software package RSCAD. In addition, the study uses two production-grade PMUs, the first one is TPA-02, and the second one is a merging unit ENMU acting as a PMU, thus imitating PMUs at the line terminals. To time-align all the measurements and to aggregate PMU data frames, various auxiliary software such as PMU Connection Tester, and hardware is used. A double-ended fault location (FL) method utilizing synchrophasors under a fault has been developed. The method is based on an overdetermined system of nonlinear equations that describes physical processes in an overhead power line and can be applied under various fault types. An integrated study of the efficiency of the developed FL method has been conducted. FL errors have been computed using production-grade PMUs ENMU and TPA-02, along with the RTDS and other equipment. The authors have considered the case of configuring PMUs of different classes at the overhead line terminals, and different phasor reporting rates as well. The conducted experiments make it possible to reveal that the fault location errors do not exceed the thresholds imposed by the standard STO 56947007-29.120.70.241-2017 in 88 % of all the analyzed fault scenarios. The developed FL method makes it possible to achieve the accuracy required by regulatory guide in calculating the distance to the short circuit point in most of the cases examined. Based on the results of numerical experiments for various types of fault cases, it can be concluded that the PMU class and phasor reporting rate do not have a significant impact on the FL accuracy, provided that the fault duration is enough for the PMU filter to approach a steady output.

Ensemble learning based transmission line fault classification using phasor measurement unit (PMU) data with explainable AI (XAI).

A large volume of data is being captured through the Phasor Measurement Unit (PMU), which opens new opportunities and challenges to the study of transmission line faults. To be specific, the Phasor Measurement Unit (PMU) data represents many different states of the power networks. The states of the PMU device help to identify different types of transmission line faults. For a precise understanding of transmission line faults, only the parameters that contain voltage and current magnitude estimations are not sufficient. This requirement has been addressed by generating data with more parameters such as frequencies and phase angles utilizing the Phasor Measurement Unit (PMU) for data acquisition. The data has been generated through the simulation of a transmission line model on ePMU DSA tools and Matlab Simulink. Different machine learning models have been trained with the generated synthetic data to classify transmission line fault cases. The individual models including Decision Tree (DT), Random Forest (RF), and K-Nearest Neighbor (K-NN) have outperformed other models in fault classification which have acquired a cross-validation accuracy of 99.84%, 99.83%, and 99.76% respectively across 10 folds. Soft voting has been used to combine the performance of these best-performing models. Accordingly, the constructed ensemble model has acquired a cross-validation accuracy of 99.88% across 10 folds. The performance of the combined models in the ensemble learning process has been analyzed through explainable AI (XAI) which increases the interpretability of the input parameters in terms of making predictions. Consequently, the developed model has been evaluated with several performance matrices, such as precision, recall, and f1 score, and also tested on the IEEE 14 bus system. To sum up, this article has demonstrated the classification of six scenarios including no fault and fault cases from transmission lines with a significant number of training parameters and also interpreted the effect of each parameter to make predictions of different fault cases with great success.

Bulk Power Systems Emergency Control Based on Machine Learning Algorithms and Phasor Measurement Units Data: A State-of-the-Art Review

Modern electrical power systems are characterized by a high rate of transient processes, the use of digital monitoring and control systems, and the accumulation of a large amount of technological information. The active integration of renewable energy sources contributes to reducing the inertia of power systems and changing the nature of transient processes. As a result, the effectiveness of emergency control systems decreases. Traditional emergency control systems operate based on the numerical analysis of power system dynamic models. This allows for finding the optimal set of preventive commands (solutions) in the form of disconnections of generating units, consumers, transmission lines, and other primary grid equipment. Thus, the steady-state or transient stability of a power system is provided. After the active integration of renewable sources into power systems, traditional emergency control algorithms became ineffective due to the time delay in finding the optimal set of control actions. Currently, machine learning algorithms are being developed that provide high performance and adaptability. This paper contains a meta-analysis of modern emergency control algorithms for power systems based on machine learning and synchronized phasor measurement data. It describes algorithms for determining disturbances in the power system, selecting control actions to maintain transient and steady-state stability, stability in voltage level, and limiting frequency. This study examines 53 studies piled on the development of a methodology for analyzing the stability of power systems based on ML algorithms. The analysis of the research is carried out in terms of accuracy, computational latency, and data used in training and testing. The most frequently used textual mathematical models of power systems are determined, and the most suitable ML algorithms for use in the operational control circuit of power systems in real time are determined. This paper also provides an analysis of the advantages and disadvantages of existing algorithms, as well as identifies areas for further research.

Estimation of Power System Inertia with the Integration of Converter-Interfaced Generation via MEMD during a Large Disturbance

The decrease in overall inertia in power systems due to the shift from synchronous generator production to renewable energy sources (RESs) presents a significant challenge. This transition affects the system’s stable frequency response, making it highly sensitive to imbalances between production and consumption, particularly during large disturbances. To address this issue, this paper introduces a novel approach using Multivariate Empirical Mode Decomposition (MEMD) for the accurate estimation of power system inertia. This approach involves applying MEMD, a complex signal processing technique, to power system frequency signals. The study utilizes PMU (Phasor Measurement Unit) data and simulated disturbances in the IEEE 39 bus test system to conduct this analysis. MEMD offers substantial advantages in analyzing multivariate data and frequency signals during disturbances, providing accurate estimations of system inertia. This approach enhances the understanding of power system dynamics in the context of renewable energy integration. However, the complexity of this methodology and the requirement for precise data collection are challenges that need to be addressed. The results from this approach show high accuracy in estimating the rate of change of frequency (RoCoF) and system inertia, with minimal deviation from actual values. The findings highlight the significant impact of renewable energy integration on system inertia and emphasize the necessity of accurate inertia estimation in modern power systems.

A Data-Driven Framework for Power System Event Type Identification via Safe Semi-Supervised Techniques

This paper investigates the use of phasor measurement unit (PMU) data with deep learning techniques to construct real-time event identification models for transmission networks. Increasing penetration of distributed energy resources represents a great opportunity to achieve decarbonization, as well as challenges in systematic situational awareness. When high-resolution PMU data and sufficient manually recorded event labels are available, the power event identification problem is defined as a statistical classification problem that can be solved by numerous cutting-edge classifiers. However, in real grids, collecting tremendous high-quality event labels is quite expensive. Utilities frequently have a large number of event records without in-depth details (i.e., unlabeled events). To bridge this gap, we propose a novel semi-supervised learning-based method to improve the performance of event classifiers trained with a limited number of labeled events by exploiting the information from massive unlabeled events. In other words, compared to existing data-driven methods, our method requires only a small portion of labeled data to achieve a similar level of accuracy. Meanwhile, this work discusses and addresses the performance degradation caused by class distribution mismatch between the training set and the real applications. Specifically, this method utilizes pseudo-labeling technique to investigate the value of unlabeled events and incrementally expands the training dataset. Moreover, a safe learning mechanism is developed to mitigate the impacts of class distribution mismatch and prevent performance degradation. Based on the proposed safe learning mechanism, our model does not directly use all unlabeled events during model training, but selectively uses them through a comprehensive evaluation procedure. Numerical studies on a sizable PMU dataset have been used to validate the performance of the proposed method.

Inverter Model Validation and Calibration Using Phasor Measurement Unit Data

Inverter Model Validation and Calibration Using Phasor Measurement Unit Data

Practical experience in monitoring low-frequency oscillations at electric power station of United Power System of Russia

The development of the Wide Area Measurement System (WAMS) in the United Power System of Russia has provided the opportunity to use phasor measurement unit (PMU) data to solve practical problems in operational dispatch management [1]. One of the most significant tasks is monitoring low-frequency oscillations (LFOs) to prevent and eliminate violations of the normal operating mode in the energy system of Russia [2]. Long-term, weakly damped, high-amplitude oscillations can lead to oscillatory instability in the power system, causing massive generation and load shutdowns, separation of the system into isolated parts, and cascading technological disruptions. Based on PMU technology, a powerful tool for monitoring low-frequency oscillations and identifying their parameters and sources in real-time has been developed and integrated into the control rooms of the System Operator. This article presents the fundamental principles of this monitoring system and describes the algorithms used to identify the sources of low-frequency oscillations. It also provides practical examples of low-frequency oscillation monitoring at power plants carried out by specialists from the System Operator.

PMU-Based Power System Stabilizer Design Using Coati Optimization Algorithm

Low-frequency oscillation modes can destabilize the power system if they do not have adequate damping rates. The interconnection of large power systems and the complexity of operation has caused the increase in these modes and conventional control techniques have difficulty guaranteeing adequate damping rates. This article proposes a design method for a Power System Stabilizer damping controller using data from Phasor Measurement Units (PMUs) to ensure adequate damping rates for the modes even in the event of PMU data failures. Case studies were simulated and analyzed using the IEEE 68-bus system.

Enhanced fault localization in multi-terminal transmission lines using novel machine learning

Accurate fault location on transmission lines is paramount for ensuring the reliable and efficient operation of the electricity grid, which underpins every aspect of modern society. Existing fault localization methods for transmission lines often face shortcomings, particularly in scenarios involving multi-terminal transmission lines, where complexities arise due to dispersed generations and intricate network configurations. Traditional approaches may struggle to provide accurate fault localization, impacting the reliability and efficiency of the electricity grid. Research provide a unique fault localization technique in this article depends on Phasor Measurement Units (PMUs) and Bidirectional Gradient Boost Random Forest (BDGB-RF) machine learning technique to address these challenges. The proposed method offers several advantages over traditional methods, including enhanced accuracy and efficiency. By leveraging PMU data and BDGB-RF, the method provides a two-phase fault localization strategy, incorporating fault line selection based on nodal current imbalance and subsequent fault distance determination. Simulation results demonstrate the effectiveness of the proposed approach, achieving up to 97% accuracy in the majority of studied scenarios, even under different tapping configurations. The adoption of this approach could significantly impact the practices of experts in the field, facilitating more reliable fault detection and localization in complex transmission line networks. This, in turn, can contribute to the resilience and stability of power systems, ultimately improving grid reliability and minimizing downtime.

Modified recurrent equation-based cubic spline interpolation for missing data recovery in phasor measurement unit (PMU).

Smart grid systems require high-quality Phasor Measurement Unit (PMU) data for proper operation, control, and decision-making. Missing PMU data may lead to improper actions or even blackouts. While the conventional cubic interpolation methods based on the solution of a set of linear equations to solve for the cubic spline coefficients have been applied by many researchers for interpolation of missing data, the computational complexity increases non-linearly with increasing data size. In this work, a modified recurrent equation-based cubic spline interpolation procedure for recovering missing PMU data is proposed. The recurrent equation-based method makes the computations of spline constants simpler. Using PMU data from the State Load Despatch Center (SLDC) in Madhya Pradesh, India, a comparison of the root mean square error (RMSE) values and time of calculation (ToC) is calculated for both methods. The modified recurrent relation method could retrieve missing values 10 times faster when compared to the conventional cubic interpolation method based on the solution of a set of linear equations. The RMSE values have shown the proposed method is effective even for special cases of missing values (edges, continuous missing values). The proposed method can retrieve any number of missing values at any location using observed data with a minimal number of calculations.