Bacteriophage T4 DNA Research Articles

Chimeric proteins constructed from bacteriophage T7 gp4 and a putative primase-helicase from Arabidopsis thaliana.

An open reading frame from Arabidopsis thaliana, which is highly homologous to the human mitochondrial DNA helicase TWINKLE, was previously cloned, expressed, and shown to have DNA primase and DNA helicase activity. The level of DNA primase activity of this Arabidopsis Twinkle homolog (ATH) was low, perhaps due to an incomplete zinc binding domain (ZBD). In this study, N-terminal truncations of ATH implicate residues 80-102 interact with the RNA polymerase domain (RPD). In addition, chimeric proteins, constructed using domains from ATH and the well-characterized T7 phage DNA primase-helicase gp4, were created to determine if the weak primase activity of ATH could be enhanced. Two chimeric proteins were constructed: ATHT7 contains the ZBD and RPD domains of ATH tethered to the helicase domain of T7, while T7ATH contains the ZBD and RPD domains of T7 tethered to the helicase domain of ATH. Both chimeric proteins were successfully expressed and purified in E. coli, and assayed for traditional primase and helicase activities. T7ATH was able to generate short oligoribonucleotide primers, but these primers could not be cooperatively extended by a DNA polymerase. Although T7ATH contains the ATH helicase domain, it exhibited few of the characteristics of a functional helicase. ATHT7 lacked primase activity altogether and also demonstrated only weak helicase activities. This work demonstrates the importance of interactions between structurally and functionally distinct domains, especially in recombinant, chimeric proteins.

Engineering processive DNA polymerases with maximum benefit at minimum cost

DNA polymerases need to be engineered to achieve optimal performance for biotechnological applications, which often require high fidelity replication when using modified nucleotides and when replicating difficult DNA sequences. These tasks are achieved for the bacteriophage T4 DNA polymerase by replacing leucine with methionine in the highly conserved Motif A sequence (L412M). The costs are minimal. Although base substitution errors increase moderately, accuracy is maintained for templates with mono- and dinucleotide repeats while replication efficiency is enhanced. The L412M substitution increases intrinsic processivity and addition of phage T4 clamp and single-stranded DNA binding proteins further enhance the ability of the phage T4 L412M-DNA polymerase to replicate all types of difficult DNA sequences. Increased pyrophosphorolysis is a drawback of increased processivity, but pyrophosphorolysis is curbed by adding an inorganic pyrophosphatase or divalent metal cations, Mn2+ or Ca2+. In the absence of pyrophosphorolysis inhibitors, the T4 L412M-DNA polymerase catalyzed sequence-dependent pyrophosphorolysis under DNA sequencing conditions. The sequence specificity of the pyrophosphorolysis reaction provides insights into how the T4 DNA polymerase switches between nucleotide incorporation, pyrophosphorolysis and proofreading pathways. The L-to-M substitution was also tested in the yeast DNA polymerases delta and alpha. Because the mutant DNA polymerases displayed similar characteristics, we propose that amino acid substitutions in Motif A have the potential to increase processivity and to enhance performance in biotechnological applications. An underlying theme in this chapter is the use of genetic methods to identify mutant DNA polymerases with potential for use in current and future biotechnological applications.

Evidence for an electrostatic mechanism of force generation by the bacteriophage T4 DNA packaging motor.

How viral packaging motors generate enormous forces to translocate DNA into viral capsids remains unknown. Recent structural studies of the bacteriophage T4 packaging motor have led to a proposed mechanism wherein the gp17 motor protein translocates DNA by transitioning between extended and compact states, orchestrated by electrostatic interactions between complimentarily charged residues across the interface between the N- and C-terminal subdomains. Here, we show that site-directed alterations in these residues cause force dependent impairments of motor function including lower translocation velocity, lower stall force, and higher frequency of pauses and slips. We further show that the measured impairments correlate with computed changes in free energy differences between the two states. These findings support the proposed structural mechanism and further suggest an energy landscape model of motor activity that couples the free energy profile of motor conformational states with that of the ATP hydrolysis cycle.

Biophysical Studies Reveal New Evidence for One-Way Revolution Mechanism of Bacteriophage ϕ29 DNA Packaging Motor

Biophysical Studies Reveal New Evidence for One-Way Revolution Mechanism of Bacteriophage ϕ29 DNA Packaging Motor

Bacteriophage T7 DNA polymerase - sequenase.

An ideal DNA polymerase for chain-terminating DNA sequencing should possess the following features: (1) incorporate dideoxy- and other modified nucleotides at an efficiency similar to that of the cognate deoxynucleotides; (2) high processivity; (3) high fidelity in the absence of proofreading/exonuclease activity; and (4) production of clear and uniform signals for detection. The DNA polymerase encoded by bacteriophage T7 is naturally endowed with or can be engineered to have all these characteristics. The chemically or genetically modified enzyme (Sequenase) expedited significantly the development of DNA sequencing technology. This article reviews the history of studies on T7 DNA polymerase with emphasis on the serial key steps leading to its use in DNA sequencing. Lessons from the study and development of T7 DNA polymerase have and will continue to enlighten the characterization of novel DNA polymerases from newly discovered microbes and their modification for use in biotechnology.

Correction: A Novel Method to Couple Electrophysiological Measurements and Fluorescence Imaging of Suspended Lipid Membranes: The Example of T5 Bacteriophage DNA Ejection

Correction: A Novel Method to Couple Electrophysiological Measurements and Fluorescence Imaging of Suspended Lipid Membranes: The Example of T5 Bacteriophage DNA Ejection

Role of the LEXE Motif of Protein-primed DNA Polymerases in the Interaction with the Incoming Nucleotide

The LEXE motif, conserved in eukaryotic type DNA polymerases, is placed close to the polymerization active site. Previous studies suggested that the second Glu was involved in binding a third noncatalytic ion in bacteriophage RB69 DNA polymerase. In the protein-primed DNA polymerase subgroup, the LEXE motif lacks the first Glu in most cases, but it has a conserved Phe/Trp and a Gly preceding that position. To ascertain the role of those residues, we have analyzed the behavior of mutants at the corresponding ϕ29 DNA polymerase residues Gly-481, Trp-483, Ala-484, and Glu-486. We show that mutations at Gly-481 and Trp-483 hamper insertion of the incoming dNTP in the presence of Mg(2+) ions, a reaction highly improved when Mn(2+) was used as metal activator. These results, together with previous crystallographic resolution of ϕ29 DNA polymerase ternary complex, allow us to infer that Gly-481 and Trp-483 could form a pocket that orients Val-250 to interact with the dNTP. Mutants at Glu-486 are also defective in polymerization and, as mutants at Gly-481 and Trp-483, in the pyrophosphorolytic activity with Mg(2+). Recovery of both reactions with Mn(2+) supports a role for Glu-486 in the interaction with the pyrophosphate moiety of the dNTP.

A cancer cell-activatable aptamer-reporter system for one-step assay of circulating tumor cells.

The current antibody-mediated numeration assays of circulating tumor cells (CTCs) require multiple steps and are time-consuming. To overcome these technical limitations, a cancer cell-activatable aptamer-reporter was formulated by conjugating a biomarker-specific aptamer sequence with paired fluorochrome-quencher molecules. In contrast to the antibody probes, the intact aptamer-reporter was optically silent in the absence of cells of interest. However, when used in an assay, the aptamer selectively targeted cancer cells through interaction with a specific surface biomarker, which triggered internalization of the aptamer-reporter and, subsequently, into cell lysosomes. Rapid lysosomal degradation of the aptamer-reporter resulted in separation of the paired fluorochrome-quencher molecules. The released fluorochrome emitted bright fluorescent signals exclusively within the targeted cancer cells, with no background noise in the assay. Thus, the assays could be completed in a single step within minutes. By using this one-step assay, CTCs in whole blood and marrow aspirate samples of patients with lymphoma tumors were selectively highlighted and rapidly detected with no off-target signals from background blood cells. The development of the cancer cell-activatable aptamer-reporter system allows for the possibility of a simple and robust point-of-care test for CTC detection, which is currently unavailable.

Mechanistic Studies of DNA-Protein Interactions in Bacteriophage T4 DNA Replication Complexes at Single-Base Resolution

Mechanistic Studies of DNA-Protein Interactions in Bacteriophage T4 DNA Replication Complexes at Single-Base Resolution

A novel method to couple electrophysiological measurements and fluorescence imaging of suspended lipid membranes: the example of T5 bacteriophage DNA ejection.

We present an innovative method to couple electrophysiological measurements with fluorescence imaging of functionalized suspended bilayers. Our method combines several advantages: it is well suited to study transmembrane proteins that are difficult to incorporate in suspended bilayers, it allows single molecule resolution both in terms of electrophysiological measurements and fluorescence imaging, and it enables mechanical stimulations of the membrane. The approach comprises of two steps: first the reconstitution of membrane proteins in giant unilamellar vesicles; then the formation of a suspended bilayer spanning a 5 to 15 micron-wide aperture that can be visualized by high NA microscope objectives. We exemplified how the technique can be used to detect in real time the translocation of T5 DNA across the bilayer during its ejection from the bacteriophage capsid.

Replication, Repair, and Translesion Polymerase Bypass of N6-Oxopropenyl-2′-deoxyadenosine

The oxidative stress products malondialdehyde and base propenal react with DNA bases forming the adduction products 3-(2'-deoxy-β-D-erythro-pentofuranosyl)pyrimido[1,2-a]purin-10(3H)-one (M1dG) and N(6)-(oxypropenyl)-2'-deoxyadenosine (OPdA). M1dG is mutagenic in vivo and miscodes in vitro, but little work has been done on OPdA. To improve our understanding of the effect of OPdA on polymerase activity and mutagenicity, we evaluated the ability of the translesion DNA polymerases hPols η, κ, and ι to bypass OPdA in vitro. hPols η and κ inserted dNTPs opposite the lesion and extended the OPdA-modified primer to the terminus. hPol ι inserted dNTPs opposite OPdA but failed to fully extend the primer. Steady-state kinetic analysis indicated that these polymerases preferentially insert dTTP opposite OPdA, although less efficiently than opposite dA. Minimal incorrect base insertion was observed for all polymerases, and dCTP was the primary mis-insertion event. Examining replicative and repair polymerases revealed little effect of OPdA on the Sulfolobus solfataricus polymerase Dpo1 or the Klenow fragment of Escherichia coli DNA polymerase I. Bacteriophage T7 DNA polymerase displayed a reduced level of OPdA bypass compared to unmodified DNA, and OPdA nearly completely blocked the activity of base excision repair polymerase hPol β. This work demonstrates that bypass of OPdA is generally error-free, modestly decreases the catalytic activity of most polymerases, and blocks hPol β polymerase activity. Although mis-insertion opposite OPdA is relatively weak, the efficiency of bypass may introduce A → G transitions observed in vivo.

Inactivation of the Bacterial RNA Polymerase Due to Acquisition of Secondary Structure by the ω Subunit

The widely conserved ω subunit encoded by rpoZ is the smallest subunit of Escherichia coli RNA polymerase (RNAP) but is dispensable for bacterial growth. Function of ω is known to be substituted by GroEL in ω-null strain, which thus does not exhibit a discernable phenotype. In this work, we report isolation of ω variants whose expression in vivo leads to a dominant lethal phenotype. Studies show that in contrast to ω, which is largely unstructured, ω mutants display substantial acquisition of secondary structure. By detailed study with one of the mutants, ω6 bearing N60D substitution, the mechanism of lethality has been deciphered. Biochemical analysis reveals that ω6 binds to β' subunit in vitro with greater affinity than that of ω. The reconstituted RNAP holoenzyme in the presence of ω6 in vitro is defective in transcription initiation. Formation of a faulty RNAP in the presence of mutant ω results in death of the cell. Furthermore, lethality of ω6 is relieved in cells expressing the rpoC2112 allele encoding β'2112, a variant β' bearing Y457S substitution, immediately adjacent to the β' catalytic center. Our results suggest that the enhanced ω6-β' interaction may perturb the plasticity of the RNAP active center, implicating a role for ω and its flexible state.

Discrete Interactions between Bacteriophage T7 Primase-Helicase and DNA Polymerase Drive the Formation of a Priming Complex Containing Two Copies of DNA Polymerase

Replisomes are multiprotein complexes that coordinate the synthesis of leading and lagging DNA strands to increase the replication efficiency and reduce DNA strand breaks caused by stalling of replication forks. The bacteriophage T7 replisome is an economical machine that requires only four proteins for processive, coupled synthesis of two DNA strands. Here we characterize a complex between T7 primase-helicase and DNA polymerase on DNA that was trapped during the initiation of Okazaki fragment synthesis from an RNA primer. This priming complex consists of two DNA polymerases and a primase-helicase hexamer that assemble on the DNA template in an RNA-dependent manner. The zinc binding domain of the primase-helicase is essential for trapping the RNA primer in complex with the polymerase, and a unique loop located on the thumb of the polymerase also stabilizes this primer extension complex. Whereas one of the polymerases engages the primase-helicase and RNA primer on the lagging strand of a model replication fork, the second polymerase in the complex is also functional and can bind a primed template DNA. These results indicate that the T7 primase-helicase specifically engages two copies of DNA polymerase, which would allow the coordination of leading and lagging strand synthesis at a replication fork. Assembly of the T7 replisome is driven by intimate interactions between the DNA polymerase and multiple subunits of the primase-helicase hexamer.

Delivery of vaccine genes and proteins into dendritic cells using the bacteriophage T4 DNA packaging machine (P3273)

Abstract Traditionally, vaccines are produced by empirical methods and current platforms generally do not allow complex designs to modify the quality and quantity of immune responses. We have developed a bacteriophage T4 platform that allows construction and delivery of multivalent vaccines containing both DNA and protein. Using this system, the composition of vaccines can be customized to address mechanistic questions as well as develop efficacious vaccines. The phage T4 DNA packaging machine consists of a molecular motor assembled at the portal vertex of an icosahedral head. The ATP-powered motor packages the 56µm-long 170-kb viral genome into 120nm x 86nm head to near crystalline density. We engineered this machine to deliver genes and proteins into mammalian cells. DNA molecules were translocated into emptied phage head and its outer surface was decorated with proteins fused to outer capsid proteins, Hoc and Soc. T4 nanoparticles carrying reporter genes, vaccine candidates, functional enzymes, and targeting ligands were efficiently delivered into cells, or targeted to antigen-presenting dendritic cells, and the delivered genes were abundantly expressed in vitro and in vivo. Mice delivered with a single dose of F1-V plague vaccine containing both gene and protein elicited robust antibody and cellular immune responses. This “progene delivery” approach might lead to new types of genetic therapies and prime-boost vaccines against complex infectious diseases such as HIV and malaria.

In vitro and in vivo delivery of genes and proteins using the bacteriophage T4 DNA packaging machine

The bacteriophage T4 DNA packaging machine consists of a molecular motor assembled at the portal vertex of an icosahedral head. The ATP-powered motor packages the 56-µm-long, 170-kb viral genome into 120 nm × 86 nm head to near crystalline density. We engineered this machine to deliver genes and proteins into mammalian cells. DNA molecules were translocated into emptied phage head and its outer surface was decorated with proteins fused to outer capsid proteins, highly antigenic outer capsid protein (Hoc) and small outer capsid protein (Soc). T4 nanoparticles carrying reporter genes, vaccine candidates, functional enzymes, and targeting ligands were efficiently delivered into cells or targeted to antigen-presenting dendritic cells, and the delivered genes were abundantly expressed in vitro and in vivo. Mice delivered with a single dose of F1-V plague vaccine containing both gene and protein in the T4 head elicited robust antibody and cellular immune responses. This “progene delivery” approach might lead to new types of vaccines and genetic therapies.

Promoter-Specific Transcription Inhibition in Staphylococcus aureus by a Phage Protein

Phage G1 gp67 is a 23 kDa protein that binds to the Staphylococcus aureus (Sau) RNA polymerase (RNAP) σ(A) subunit and blocks cell growth by inhibiting transcription. We show that gp67 has little to no effect on transcription from most promoters but is a potent inhibitor of ribosomal RNA transcription. A 2.0-Å-resolution crystal structure of the complex between gp67 and Sau σ(A) domain 4 (σ(A)(4)) explains how gp67 joins the RNAP promoter complex through σ(A)(4) without significantly affecting σ(A)(4) function. Our results indicate that gp67 forms a complex with RNAP at most, if not all, σ(A)-dependent promoters, but selectively inhibits promoters that depend on an interaction between upstream DNA and the RNAP α-subunit C-terminal domain (αCTD). Thus, we reveal a promoter-specific transcription inhibition mechanism by which gp67 interacts with the RNAP promoter complex through one subunit (σ(A)), and selectively affects the function of another subunit (αCTD) depending on promoter usage.

Zinc-binding Domain of the Bacteriophage T7 DNA Primase Modulates Binding to the DNA Template

The zinc-binding domain (ZBD) of prokaryotic DNA primases has been postulated to be crucial for recognition of specific sequences in the single-stranded DNA template. To determine the molecular basis for this role in recognition, we carried out homolog-scanning mutagenesis of the zinc-binding domain of DNA primase of bacteriophage T7 using a bacterial homolog from Geobacillus stearothermophilus. The ability of T7 DNA primase to catalyze template-directed oligoribonucleotide synthesis is eliminated by substitution of any five-amino acid residue-long segment within the ZBD. The most significant defect occurs upon substitution of a region (Pro-16 to Cys-20) spanning two cysteines that coordinate the zinc ion. The role of this region in primase function was further investigated by generating a protein library composed of multiple amino acid substitutions for Pro-16, Asp-18, and Asn-19 followed by genetic screening for functional proteins. Examination of proteins selected from the screening reveals no change in sequence-specific recognition. However, the more positively charged residues in the region facilitate DNA binding, leading to more efficient oligoribonucleotide synthesis on short templates. The results suggest that the zinc-binding mode alone is not responsible for sequence recognition, but rather its interaction with the RNA polymerase domain is critical for DNA binding and for sequence recognition. Consequently, any alteration in the ZBD that disturbs its conformation leads to loss of DNA-dependent oligoribonucleotide synthesis.

Thioredoxin, the Processivity Factor, Sequesters an Exposed Cysteine in the Thumb Domain of Bacteriophage T7 DNA Polymerase

Gene 5 protein (gp5) of bacteriophage T7 is a non-processive DNA polymerase. It achieves processivity by binding to Escherichia coli thioredoxin (trx). gp5/trx complex binds tightly to a primer-DNA template enabling the polymerization of hundreds of nucleotides per binding event. gp5 contains 10 cysteines. Under non-reducing condition, exposed cysteines form intermolecular disulfide linkages resulting in the loss of polymerase activity. No disulfide linkage is detected when Cys-275 and Cys-313 are replaced with serines. Cys-275 and Cys-313 are located on loop A and loop B of the thioredoxin binding domain, respectively. Replacement of either cysteine with serine (gp5-C275S, gp5-C313S) drastically decreases polymerase activity of gp5 on dA(350)/dT(25). On this primer-template gp5/trx in which Cys-313 or Cys-275 is replaced with serine have 50 and 90%, respectively, of the polymerase activity observed with wild-type gp5/trx. With single-stranded M13 DNA as a template gp5-C275S/trx retains 60% of the polymerase activity of wild-type gp5/trx. In contrast, gp5-C313S/trx has only one-tenth of the polymerase activity of wild-type gp5/trx on M13 DNA. Both wild-type gp5/trx and gp5-C275S/trx catalyze the synthesis of the entire complementary strand of M13 DNA, whereas gp5-C313S/trx has difficulty in synthesizing DNA through sites of secondary structure. gp5-C313S fails to form a functional complex with trx as measured by the apparent binding affinity as well as by the lack of a physical interaction with thioredoxin during hydroxyapatite-phosphate chromatography. Small angle x-ray scattering reveals an elongated conformation of gp5-C313S in comparison to a compact and spherical conformation of wild-type gp5.

An Interaction between DNA Polymerase and Helicase Is Essential for the High Processivity of the Bacteriophage T7 Replisome

Synthesis of the leading DNA strand requires the coordinated activity of DNA polymerase and DNA helicase, whereas synthesis of the lagging strand involves interactions of these proteins with DNA primase. We present the first structural model of a bacteriophage T7 DNA helicase-DNA polymerase complex using a combination of small angle x-ray scattering, single-molecule, and biochemical methods. We propose that the protein-protein interface stabilizing the leading strand synthesis involves two distinct interactions: a stable binding of the helicase to the palm domain of the polymerase and an electrostatic binding of the carboxyl-terminal tail of the helicase to a basic patch on the polymerase. DNA primase facilitates binding of DNA helicase to ssDNA and contributes to formation of the DNA helicase-DNA polymerase complex by stabilizing DNA helicase.

Assembly and subunit stoichiometry of the functional helicase-primase (primosome) complex of bacteriophage T4

Physical biochemical techniques are used to establish the structure, subunit stoichiometry, and assembly pathway of the primosome complex of the bacteriophage T4 DNA replication system. Analytical ultracentrifugation and fluorescence anisotropy methods show that the functional T4 primosome consists of six gp41 helicase subunits that assemble into a hexagon, driven by the binding of six NTPs (or six nonhydrolyzable GTPγS analogues) that are located at and stabilize the intersubunit interfaces, together with a single tightly bound gp61 primase subunit. Assembling the components of the primosome onto a model DNA replication fork is a multistep process, but equilibrium cannot be reached along all mixing pathways. Producing a functional complex requires that the helicase hexamer be assembled in the presence of the DNA replication fork construct prior to the addition of the primase to avoid the formation of metastable DNA-protein aggregates. The gp41 helicase hexamer binds weakly to fork DNA in the absence of primase, but forms a much more stable primosome complex that expresses full and functional helicase (and primase) activities when bound to a gp61 primase subunit at a helicase:primase subunit ratio of 61. The presence of additional primase subunits does not change the molecular mass or helicase activity of the primosome, but significantly inhibits its primase activity. We develop both an assembly pathway and a minimal mechanistic model for the structure and function of the T4 primosome that are likely to be relevant to the assembly and function of the replication primosome subassemblies of higher organisms as well.