pH Sensitivity Research Articles

Synergistic anti-osteosarcoma cell effects of the methotrex-ate/PI3K/mTOR inhibitor nanoparticle codelivery system

ABSTRACT Advanced osteosarcoma (OS) has low responsiveness to treatment regimens. Methotrexate (MTX), the first-line chemotherapeutic agent for advanced OS, frequently suffers from severe side effects that lead to chemotherapy interruption. To improve the efficacy and reduce the toxic side effects, we constructed a PF@MTX NP nano-delivery system using MTX-ss-γPGA polymer as a drug carrier loaded with PF. The average size of PF@MTX NPs was approximately 171.9 ± 2.13 nm with a zeta potential of approximately -32.91 ± 0.03 mV, uniformly distributed. We found that the nano showed a significant slowdown in MTX and PF release within 48 h and exhibited GSH-responsive pH sensitivity. In addition, the results of cellular uptake assay, toxicity, scratch and AO/EB staining assays showed that the PF@MTX NPs nanoparticles were able to enter the cells and induced 143B cell death and migration. Thus, the PF@MTX NPs nano-delivery system provides an effective strategy for the combined treatment of solid osteosarcoma.

Development of active pH-sensitive biodegradable films based on chitosan and κ -carrageenan biopolymers enriched in beluga black lentil additives

Current trends encourage the utilization of food waste for the production of non-traditional food packaging. These novel packages are biodegradable and can be endowed with additional functional purposes. In this work, biodegradable, pH-indicating packages with antioxidant properties were developed. The package films were prepared by using κ-carrageenan (kappa-carrageenan) and chitosan biopolymers incorporated with Beluga black lentil leachate (BBLL) or Beluga black lentil powder (BBLP). Then, antioxidant, mechanical, UV-barrier properties, morphological properties, and pH sensitivity were investigated. The BBLL and BBLP alone showed high antioxidant potential and pH sensitivity with solution color change from bright red to reddish-brown and finally to green color when pH gradually increased from 1 to 13. The κ-carrageenan films showed the best response to pH changes, with color changes being the most pronounced in the films with the BBLL. Both BBL fillers significantly improve film antioxidant properties, and UV barrier properties, and reduce the film's water content. The κ-carrageenan films revealed the highest UV protection and biodegradability. The BBLL provides films with a thickness of > 0.3 mm acceptable for edible films. Moreover, the BBLL enhanced the mechanical parameters of the films and water vapor permeability, although the κ-carrageenan coats revealed significantly better tensile strength. BBLL also worked well as a filler with both biopolymers according to the scanning electronic microscopy images. Considering the color changes as the main factor for this study's purposes the κ-carrageenan film with 20% BBLL represents the best candidate as an alternative to fossil-based packages for keeping and monitoring food freshness.

PH-sensitive spontaneous decay of functionalized carbon dots in solutions.

Carbon quantum dots have become attractive in various applications, such as drug delivery, biological sensing, photocatalysis, and solar cells. Among these, pH sensing via luminescence lifetime measurements of surface-functionalized carbon dots is one application currently investigated for their long lifetime and autonomous operation. In this article, we explore the theoretical connection between excitation lifetimes and the pH value of the surrounding liquid via the protonation and deprotonation of functional groups. Example calculations applied to m-phenylenediamine, phloroglucinol, and tethered disperse blue 1 are shown by applying a separation approach treating the electronic wave function of functional groups separately from the internal electronic structure of the (large) carbon dot. The bulk of the carbon dot is treated as an environment characterized by its optical spectrum that shifts the transition rates of the functional group. A simple relationship between pH, pKa, and mixed fluorescence lifetime is derived from the transition rates of the protonated and deprotonated states. pH sensitivity improves when the difference in the transition rates is greatest between protonated and deprotonated species, with the greatest sensitivity found where the pKa is close to the pH region of interest. The introduced model can directly be extended to consider multicomponent liquids and multiple protonation states.

Synthesis, Characterization, and Investigation of Doxorubicin Drug Release Properties of Poly(acrylamide-co-acrylic Acid/Maleic Acid)-Hydroxyapatite Composite Hydrogel.

Hydroxyapatite and its derivatives have been used for a lot of applications. One of them is drug release studies. Due to its low adhesion strength and lack of the strength and durability required for load-carrying applications, there is a need to improve the properties of hydroxyapatite. For this aim, the most important factors are increasing pH sensitivity and preventing coagulation. Mixing it with multifunctional polymers is the best solution. The main objectives are: 1- preparing poly(acrylamide-co-acrylic acid/maleic acid)- hydroxyapatite (PAm-co-PAA/PMA-HApt), 2- assessment of (PAm-co-PAA/PMA-HApt) and dox-loaded poly(acrylamide-co-acrylic acid/maleic acid) (Dox-(PAm-co-PAA/PMA-HApt)) composite hydrogels, and 3- elucidating the difference in behavior of drug release studies between hydroxyapatite (HApt) and poly(acrylamide-co-acrylic acid/maleic acid) composite hydrogels. A composite of PAm-co-PAA/PMA-HApt was prepared by direct polymerization of acrylamide-co-acrylic acid/maleic acid in a suspension of HApt. The drug loading and release features of PAm-co-PAA/PMA-HApt and HApt were then investigated for doxorubicin (dox) release. Using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermogravimetric analysis (TG/DTA), this unique composite hydrogel has been physicochemically investigated. Also, a colorimetric assay was used to assess the in vitro biocompatible support and anticancer activity of HApt and the newly developed composite hydrogel XTT (2,3-Bis-(2-Methoxy-4-Nitro-5-Sulfophenyl)-2H-Tetrazolium-5-Carboxanilide) assay. According to the results of drug release studies of this new material, it is pH sensitive, and PAm-co-PAA/PMA-HApt demonstrated a faster release than HApt at 37°C in the acidic solution of pH 4.5 than in the neutral solution of pH 7.4. The XTT assay outcomes also demonstrated the biocompatibility of PAm-co-PAA/PMA-HApt and HApt and the cytotoxic effect of dox-loaded PAm-co-PAA/PMA-HApt. It should be inferred that the drug release profile was improved at pH 4.5 by the newly produced pH-sensitive composite hydrogel.

PH-Responsive Mesoporous Silica Nanoparticles Loaded with Naringin for Targeted Osteoclast Inhibition and Bone Regeneration.

It is well-established that osteoclast activity is significantly influenced by fluctuations in intracellular pH. Consequently, a pH-sensitive gated nano-drug delivery system represents a promising therapeutic approach to mitigate osteoclast overactivity. Our prior research indicated that naringin, a natural flavonoid, effectively mitigates osteoclast activity. However, naringin showed low oral availability and short half-life, which hinders its clinical application. We developed a drug delivery system wherein chitosan, as gatekeepers, coats mesoporous silica nanoparticles loaded with naringin (CS@MSNs-Naringin). However, the inhibitory effects of CS@MSNs-Naringin on osteoclasts and the underlying mechanisms remain unclear, warranting further research. First, we synthesized CS@MSNs-Naringin and conducted a comprehensive characterization. We also measured drug release rates in a pH gradient solution and verified its biosafety. Subsequently, we investigated the impact of CS@MSNs-Naringin on osteoclasts induced by bone marrow-derived macrophages, focusing on differentiation and bone resorption activity while exploring potential mechanisms. Finally, we established a rat model of bilateral critical-sized calvarial bone defects, in which CS@MSNs-Naringin was dispersed in GelMA hydrogel to achieve in situ drug delivery. We observed the ability of CS@MSNs-Naringin to promote bone regeneration and inhibit osteoclast activity in vivo. CS@MSNs-Naringin exhibited high uniformity and dispersity, low cytotoxicity (concentration≤120 μg/mL), and significant pH sensitivity. In vitro, compared to Naringin and MSNs-Naringin, CS@MSNs-Naringin more effectively inhibited the formation and bone resorption activity of osteoclasts. This effect was accompanied by decreased phosphorylation of key factors in the NF-κB and MAPK signaling pathways, increased apoptosis levels, and a subsequent reduction in the production of osteoclast-specific genes and proteins. In vivo, CS@MSNs-Naringin outperformed Naringin and MSNs-Naringin, promoting new bone formation while inhibiting osteoclast activity to a greater extent. Our research suggested that CS@MSNs-Naringin exhibited the strikingly ability to anti-osteoclasts in vitro and in vivo, moreover promoted bone regeneration in the calvarial bone defect.

High pH stability and detection of α-synuclein using an EGFET biosensor with an HfO2 gate deposited by high-power pulsed magnetron sputtering

In this research, hafnium oxide (HfO2) was first fabricated in an in-house-developed high-power pulsed magnetron sputtering system (HiPIMS) functionalized for application as a high-performance extended gate field-effect transistor (EGFET) for the detection of pH and proteins associated with Parkinson's disease (PD). PD is the second most common neurodegenerative disease in elderly people after Alzheimer's disease. The α-synuclein protein in patients’ blood may be a potential biomarker in the early stage of PD. Detection of α-synuclein with high sensitivity and nonspecific binding through HfO2-EGFET biosensors has the advantages of low cost and simple fabrication from disposable EGs. Among the duty cycle conditions tested, HfO2 deposited at a 25% duty cycle in HiPIMS exhibited superior pH sensitivity and linearity, with values of 56.4 mV/pH and 99.7%, respectively. The hysteresis width and drift coefficient are −3 mV and 0.3 mV/h, respectively. To overcome the Debye length limitation, 100-fold diluted phosphate buffer solution and the PMOS configuration were used to determine the α-synuclein for which the isoelectric point was 4.67. The negative gate bias in the PMOS configuration successfully causes α-synuclein to approach the surface of HfO2 EG to achieve a sensitivity of 12.1 mV/dec and a linearity of 99.5% in the range of 0.1–1000 pg/mL. The limit of detection is 0.198 pg/mL, and the immobilized surface ultimately binds specifically, resulting in low interference signals from other related biomarkers. This promising study shows that detecting various proteins involved in different diseases and performing clinical tests can be accomplished in the future.

PH-sensitive fractal structured polyaniline in the honeycomb-patterned porous polymer film for the detection of dopamine and glucose

Using highly pH-sensitive fractal structured polyaniline (f-PANI) inducing conductivity change in the honeycomb-patterned (HCP) porous polymer film, we have applied for the detection of dopamine and glucose. Fractal-structured PANI in the HCP porous polymer film is formed by the same method recently reported using solid–liquid interfacial reaction. For the interfacial reaction, the HCP polystyrene (PS) porous film containing benzoyl peroxide (BPO) was immersed into the aniline aqueous solution under conditions of non-stirring for the growing of fractal structure instead of aggregated PANI. The pH sensitivity of the conductivity of the HCP film functionalized with fractal structured PANI was so high compared to the HCP film functionalized with simple aggregated PANI (a-PANI) under stirring conditions for the solid–liquid interfacial reaction. By using the high pH sensitive fractal structured PANI functionalized HCP film, dopamine, and glucose were selectively detected. The film acts as a micro reactor for the effective detection of dopamine and glucose.

The effects of doxapram and its potential interactions with K2P channels in experimental model preparations.

The channels commonly responsible for maintaining cell resting membrane potentials are referred to as K2P (two-P-domain K+ subunit) channels. These K+ ion channels generally remain open but can be modulated by their local environment. These channels are classified based on pharmacology, pH sensitivity, mechanical stretch, and ionic permeability. Little is known about the physiological nature of these K2P channels in invertebrates. Acidic conditions depolarize neurons and muscle fibers, which may be caused by K2P channels given that one subtype can be blocked by acidic conditions. Doxapram is used clinically as a respiratory aid known to block acid-sensitive K2P channels; thus, the effects of doxapram on the muscle fibers and synaptic transmission in larval Drosophila and crawfish were monitored. A dose-dependent response was observed via depolarization of the larval Drosophila muscle and an increase in evoked synaptic transmission, but doxapram blocked the production of action potentials in the crawfish motor neuron and had a minor effect on the resting membrane potential of the crawfish muscle. This indicates that the nerve and muscle tissues in larval Drosophila and crawfish likely express different K2P channel subtypes. Since these organisms serve as physiological models for neurobiology and physiology, it would be of interest to further investigate what types of K2P channel are expressed in these tissues. (212 words).

Recent Advancements in Metallic Au- and Ag-Based Chitosan Nanocomposite Derivatives for Enhanced Anticancer Drug Delivery

The rapid advancements in nanotechnology in the field of nanomedicine have the potential to significantly enhance therapeutic strategies for cancer treatment. There is considerable promise for enhancing the efficacy of cancer therapy through the manufacture of innovative nanocomposite materials. Metallic nanoparticles have been found to enhance the release of anticancer medications that are loaded onto them, resulting in a sustained release, hence reducing the dosage required for drug administration and preventing their buildup in healthy cells. The combination of nanotechnology with biocompatible materials offers new prospects for the development of advanced therapies that exhibit enhanced selectivity, reduced adverse effects, and improved patient outcomes. Chitosan (CS), a polysaccharide possessing distinct physicochemical properties, exhibits favorable attributes for controlled drug delivery due to its biocompatibility and biodegradability. Chitosan nanocomposites exhibit heightened stability, improved biocompatibility, and prolonged release characteristics for anticancer medicines. The incorporation of gold (Au) nanoparticles into the chitosan nanocomposite results in the manifestation of photothermal characteristics, whereas the inclusion of silver (Ag) nanoparticles boosts the antibacterial capabilities of the synthesized nanocomposite. The objective of this review is to investigate the recent progress in the utilization of Ag and Au nanoparticles, or a combination thereof, within a chitosan matrix or its modified derivatives for the purpose of anticancer drug delivery. The research findings for the potential of a chitosan nanocomposite to deliver various anticancer drugs, such as doxorubicin, 5-Fluroacil, curcumin, paclitaxel, and 6-mercaptopurine, were investigated. Moreover, various modifications carried out on the chitosan matrix phase and the nanocomposite surfaces to enhance targeting selectivity, loading efficiency, and pH sensitivity were highlighted. In addition, challenges and perspectives that could motivate further research related to the applications of chitosan nanocomposites in cancer therapy were summarized.

Chitosan-copper microparticles as doxorubicin microcarriers for bone tumor therapy

Doxorubicin (DOX) is a chemotherapeutic drug used in osteosarcoma treatments, usually administrated in very high dosages. This study proposes novel DOX microcarriers based on chitosan (CHT) physically crosslinked with copper(II) ions that will act synergically to inhibit tumor growth at lower drug dosage without affecting the healthy cells. Spherical CHT-Cu microparticles with a smooth surface and an average size of 30.1 ± 9.1 µm were obtained by emulsion. The release of Cu2+ ions from the CHT-Cu microparticles showed that 99.4 % of added cupric ions were released in 72 h of incubation in a complete cell culture medium (CCM). DOX entrapment in microparticles was conducted in a phosphate buffer solution (pH 6), utilizing the pH sensitivity of the polymer. The successful drug-loading process was confirmed by DOX emitting red fluorescence from drug-loaded microcarriers (DOX@CHT-Cu). The drug release in CCM showed an initial burst release, followed by sustained release. Biological assays indicated mild toxicity of CHT-Cu microparticles on the MG-63 osteosarcoma cell line, without affecting the viability of human mesenchymal stem cells (hMSCs). The DOX@CHT-Cu microparticles at concentration of 0.5 mg mL‒1 showed selective toxicity toward MG-63 cells.

Blueberry anthocyanin based active intelligent wheat gluten protein films: Preparation, characterization, and applications for shrimp freshness monitoring

The aim of this study was to prepare active intelligent gluten protein films using wheat gluten protein (WG) and apple pectin (AP) as film-forming matrices, and blueberry anthocyanin extract (BAE) as a natural indicator. SEM and FT-IR analyses demonstrated the successful immobilization of BAE in the film matrix by hydrogen bonding interactions and its compatibility with WG and AP. The resultant WG-AP/BAE indicator films demonstrated notable antioxidant activity, color stability, barrier qualities, pH and ammonia response sensitivity, and mechanical properties. Among them, WG-AP/BAE5 exhibited the best mechanical properties (TS: 0.83 MPa and EB: 242.23%) as well as the lowest WVP (3.92 × 10−8 g.m/m2.Pa.s), and displayed high sensitivity to volatile ammonia. In addition, WG-AP/BAE5 showed a color shift from purplish red to green to yellowish green, demonstrating the monitoring of shrimp freshness in real time. Consequently, this study offers a firm scientific foundation for the development of active intelligent gluten protein films and their use in food freshness assessments.

Enhancing Electrochemical Sensing through Molecular Engineering of Reduced Graphene Oxide-Solution Interfaces and Remote Floating-Gate FET Analysis.

Two-dimensional nanomaterials such as reduced graphene oxide (rGO) have captured significant attention in the realm of field-effect transistor (FET) sensors due to their inherent high sensitivity and cost-effective manufacturing. Despite their attraction, a comprehensive understanding of rGO-solution interfaces (specifically, electrochemical interfacial properties influenced by linker molecules and surface chemistry) remains challenging, given the limited capability of analytical tools to directly measure intricate solution interface properties. In this study, we introduce an analytical tool designed to directly measure the surface charge density of the rGO-solution interface leveraging the remote floating-gate FET (RFGFET) platform. Our methodology involves characterizing the electrochemical properties of rGO, which are influenced by adhesion layers between SiO2 and rGO, such as (3-aminopropyl)trimethoxysilane (APTMS) and hexamethyldisilazane (HMDS). The hydrophilic nature of APTMS facilitates the acceptance of oxygen-rich rGO, resulting in a noteworthy pH sensitivity of 56.8 mV/pH at the rGO-solution interface. Conversely, hydrophobic HMDS significantly suppresses the pH sensitivity from the rGO-solution interface, attributed to the graphitic carbon-rich surface of rGO. Consequently, the carbon-rich surface facilitates a denser arrangement of 1-pyrenebutyric acid N-hydroxysuccinimide ester linkers for functionalizing capturing probes on rGO, resulting in an enhanced sensitivity of lead ions by 32% in our proof-of-concept test.

Modified Release 3D-Printed Capsules Containing a Ketoprofen Self-Nanoemulsifying System for Personalized Medical Application.

This study explores the realm of personalized medicine by investigating the utilization of 3D-printed dosage forms, specifically focusing on patient-specific enteric capsules designed for the modified release of ketoprofen, serving as a model drug. The research investigates two distinct scenarios: the modification of drug release from 3D-printed capsules crafted from hydroxypropyl methylcellulose phthalate:polyethylene glycol (HPMCP:PEG) and poly(vinyl alcohol) (PVA), tailored for pH sensitivity and delayed release modes, respectively. Additionally, a novel ketoprofen-loaded self-nanoemulsifying drug delivery system (SNEDDS) based on pomegranate seed oil (PSO) was developed, characterized, and employed as a fill material for the capsules. Through the preparation and characterization of the HPMCP:PEG based filament via the hot-melt extrusion method, the study thoroughly investigated its thermal and mechanical properties. Notably, the in vitro drug release analysis unveiled the intricate interplay between ketoprofen release, polymer type, and capsule thickness. Furthermore, the incorporation of ketoprofen into the SNEDDS exhibited an enhancement in its in vitro cylooxygenase-2 (COX-2) inhibitory activity. These findings collectively underscore the potential of 3D printing in shaping tailored drug delivery systems, thereby contributing significantly to the advancement of personalized medicine.

Readily Available Oral Prebiotic Protein Reactive Oxygen Species Nanoscavengers for Synergistic Therapy of Inflammation and Fibrosis in Inflammatory Bowel Disease.

A significant gap exists in the demand for safe and effective drugs for inflammatory bowel disease (IBD), and its associated intestinal fibrosis. As oxidative stress plays a central role in the pathogenesis of IBD, astaxanthin (AST), a good antioxidant with high safety, holds promise for treating IBD. However, the application of AST is restricted by its poor solubility and easy oxidation. Herein, different protein-based nanoparticles (NPs) are fabricated for AST loading to identify an oral nanovehicle with potential clinical applicability. Through systematic validation via molecular dynamics simulation and in vitro characterization of properties, whey protein isolate (WPI)-driven NPs using a simple preparation method without the need for cross-linking agents or emulsifiers were identified as the optimal carrier for oral AST delivery. Upon oral administration, the WPI-driven NPs, benefiting from the intrinsic pH sensitivity and mucoadhesive properties, effectively shielded AST from degradation by gastric juices and targeted release of AST at intestinal lesion sites. Additionally, the AST NPs displayed potent therapeutic efficacy in both dextran sulfate sodium (DSS)-induced acute colitis and chronic colitis-associated intestinal fibrosis by ameliorating inflammation, oxidative damage, and intestinal microecology. In conclusion, the AST WPI NPs hold a potential therapeutic value in treating inflammation and fibrosis in IBD.

Multifunctional baicalin nanoparticles inhibit tumor cell growth and activate RAW264.7 macrophages

Materpaials-based drug delivery systems can enhance the effect of cancer treatment by improving chemotherapy and immunomodulation. Recent research revealed that Baicalin（BA）have good immunomodulatory activity and anti-tumor effect. Here, a pH-sensitive tumor-targeting delivery system for Baicalin (BA-LP-PEOz) was constructed using DSPE-PEOz for pH sensitization. This preparation method was conducted using three single-factor experiments. Response surface Box-Behnken (BBD) design was used to optimize the factor levels. Our results showed that BA-LP-PEOz had synergistic capacity of inhibiting tumor cell (HepG2，4T1 and A549) growth and activating macrophages (RAW264.7). Further mechanistic studies revealed that BA-LP-PEOz can activate RAW264.7 by affecting the NF-κB signaling pathway. We expect that the improved efficacy of the synergetic system provides a prospective strategy for cancer therapy.

Green synthesis of fluorescent carbon dots from ascorbic acid and their application in sensing and biological imaging

A simple, highly efficient, and environmentally friendly one-step method has been developed to synthesize fluorescent carbon dots (CDs) with the assistance of hydrogen peroxide (H2O2). Here H2O2 acts as a green accelerator to promote the preparation of CDs, while temperature plays a critical role in controlling the entire synthesis process. The prepared CDs demonstrate monodispersion, with an average diameter of ∼6.8 nm, superior stability, and excitation-dependent photoluminescent (PL) behavior. The PL mechanism of the CDs was investigated using time-resolved PL decay, revealing that the PL originates from both the defect state and the intrinsic state of the CDs. Furthermore, the CDs show significant promise as pH sensors and versatile nanothermometry devices, owing to their remarkable sensitivity to both pH and temperature, as demonstrated by the pronounced dependence of their steady-state fluorescence emission spectra. It’s worth noting that temperature and pH sensors present significant reversibility, sensitivity, and linearity. More importantly, the CDs display low cytotoxicity, good biocompatibility, and the ability to enter human breast cancer Bcap-37 cells, making them highly suitable candidates for cellular imaging and labeling.

Plasticizer-based and polymer-free ion-selective optodes on cellulose paper

Paper-based ion-selective optodes (ISOs) allow for low-cost ion measurements using widely accessible optical detectors such as smartphones, representing an attractive analytical platform for medical testing and environmental monitoring. Previously reported paper-based ISOs rely on plasticized PVC membranes or PVC/plasticizer-free adsorption layers containing hydrophobic sensing chemicals. In this paper, we studied a new format of paper-based ISOs, in which a plasticizer phase containing sensing chemicals is deposited onto cellulose paper without using a hydrophobic polymer like PVC. Compared to ISOs without plasticizers and polymers, the plasticizer-based ISOs show much higher pH sensitivity when using chromoionophore I and tetrakis[3,5-bis(trifluoromethyl)phenyl]borate as the sensing chemicals. When the sensing layer further contains a solid ionophore with high molecular rigidity, the plasticizer-based ISOs for cations also exhibit enhanced sensitivity than the plasticizer-free ISOs. However, when the ionophore is a liquid at room temperature or has a long alkyl chain, the plasticizer-based and plasticizer-free ISOs have comparable responses because the ionophore behaves as a pseudo-plasticizer. Compared to ISOs with both plasticizers and polymers, the elimination of hydrophobic polymers like PVC makes inkjet printing more efficient and preserves the capillary action of the porous paper. By using the newly launched Samba cartridge with smaller nozzles, the plasticizer-based and polymer-free optodes for sodium, potassium, and calcium ions are prepared by inkjet printing for the first time. In an example application, the inkjet-printed plasticizer-based and polymer-free ISOs are used for colorimetric measurements of urine calcium.

Role of Histidine 310 in Amydetes vivianii firefly luciferase pH and metal sensitivities and improvement of its color tuning properties.

Firefly luciferases emit yellow-green light and are pH-sensitive, changing the bioluminescence color to red in the presence of heavy metals, acidic pH and high temperatures. These pH and metal-sensitivities have been recently harnessed for intracellular pH indication and toxic metal biosensing. However, whereas the structure of the pH sensor and the metal binding site, which consists mainly of two salt bridges that close the active site (E311/R337 and H310/E354), has been identified, the specific role of residue H310 in pH and metal sensing is still under debate. The Amydetes vivianii firefly luciferase has one of the lowest pH sensitivities among the group of pH-sensitive firefly luciferases, displaying high bioluminescent activity and special spectral selectivity for cadmium and mercury, which makes it a promising analytical reagent. Using site-directed mutagenesis, we have investigated in detail the role of residue H310 on pH and metal sensitivity in this luciferase. Negatively charged residues at position 310 increase the pH sensitivity and metal sensitivity; H310G considerably increases the size of the cavity, severely impacting the activity, H310R closes the cavity, and H310F considerably decreases both pH and metal sensitivities. However, no substitution completely abolished pH and metal sensitivities. The results indicate that the presence of negatively charged and basic side chains at position 310 is important for pH sensitivity and metals coordination, but not essential, indicating that the remaining side chains of E311 and E354 may still coordinate some metals in this site. Furthermore, a metal binding site search predicted that H310 mutations decrease the affinity mainly for Zn, Ni and Hg but less for Cd, and revealed the possible existence of additional binding sites for Zn, Ni and Hg.

Design of a targeted dual drug delivery system for boosting the efficacy of photoimmunotherapy against melanoma proliferation and metastasis

IntroductionThe combination of a photosensitizer and indoleamine-2,3 dioxygenase (IDO) inhibitor provides a promising photoimmunotherapy (PIT) strategy for melanoma treatment. A dual drug delivery system offers a potential approach for optimizing the inhibitory effects of PIT on melanoma proliferation and metastasis. ObjectiveTo develop a dual drug delivery system based on PIT and to study its efficacy in inhibiting melanoma proliferation and metastasis. MethodsWe constructed a multifunctional nano-porphyrin material (P18-APBA-HA) using the photosensitizer-purpurin 18 (P18), hyaluronic acid (HA), and 4-(aminomethyl) phenylboronic acid (APBA). The resulting P18-APBA-HA was inserted into a phospholipid membrane and the IDO inhibitor epacadostat (EPA) was loaded into the internal phase to prepare a dual drug delivery system (Lip\\EPA\\P18-APBA-HA). Moreover, we also investigated its physicochemical properties, targeting, anti-tumor immunity, and anti-tumor proliferation and metastasis effects. ResultsThe designed system utilized the pH sensitivity of borate ester to realize an enhanced-targeting strategy to facilitate the drug distribution in tumor lesions and efficient receptor-mediated cellular endocytosis. The intracellular release of EPA from Lip\\EPA\\P18-APBA-HA was triggered by thermal radiation, thereby inhibiting IDO activity in the tumor microenvironment, and promoting activation of the immune response. Intravenous administration of Lip\\EPA\\P18-APBA-HA effectively induced anti-tumor immunity by promoting dendritic cell maturation, cytotoxic T cell activation, and regulatory T cell suppression, and regulating cytokine secretion, to inhibit the proliferation of melanoma and lung metastasis. ConclusionThe proposed nano-drug delivery system holds promise as offers a promising strategy to enhance the inhibitory effects of the combination of EPA and P18 on melanoma proliferation and metastasis.

Development of Ag2O–TeO2-based glass and glass/stainless steel reference electrodes for pH sensors

Glass pH sensors are unsuitable for in vivo biomedical, clinical, or food applications because of the brittleness of glass, the difficulty in measuring small volumes and complicated matrix, and the necessity of calibration. Enamel structures such as glass/stainless steel (SUS) may substitute glass-based pH electrodes. This study developed new reference electrodes for pH sensors using ternary Ag2O–TeO2-MaOb (M = B, Ge, and P) glass and glass/SUS. The effect of the partial replacement of TeO2 in Ag2O–TeO2 glasses with B2O3, GeO2, and P2O5 on the pH sensitivity was investigated. (1) The effect of the partial replacement on the pH 4–9 sensitivity, which is defined as 100% for the ideal working electrode and 0% for the ideal reference electrode estimated from pH potential, became prominent in the order of GeO2, B2O3, and P2O5 in glass electrodes. Ag2O–TeO2–B2O3 glasses showed the lowest pH 7–9 sensitivity of 1% among the present electrodes. Ag2O–TeO2–P2O5 glasses showed the lowest pH 4–9 sensitivities of 24–33% among the present electrodes. (2) 25Ag2O･55TeO2･20P2O5/SUS showed a very low pH 4–9 sensitivity of 5% in glass/SUS electrodes. In this case, AgP2 may be responsible for the low pH 4–9 sensitivity because only AgP2 was detected from XRD measurements, and a small particle on the surface was observed in AFM observations. On the other hand, the crystallization of the glass matrix of 25Ag2O･55TeO2･20P2O5/SUS was suppressed by adding P2O5. Thus, 25Ag2O･55TeO2･20P2O5/SUS is a candidate for a robust KCl-leakless reference electrode for pH sensors.