Perylene Diimide Research Articles

Ring Fusion Elevates the Electronic Mobility of Azabenzannulated Perylene Diimide.

The backwardness of n-type organic semiconductors still exists compared with the p-type counterparts. Thus, the development of high-performance n-type organic semiconductors is of great importance for organic electronic devices and their integrated circuits. In recent years, azabenzannulated perylene diimide (PDI), as one of immense bay-region-annulated PDI derivatives, has drawn considerable attentions. However, the electronic mobilities of azabenzannulated PDI derivatives are barely satisfactory. In this contribution, the peripheral benzene ring in azabenzannulated PDI 2 was fused to the ortho position by intramolecular C-H arylation cyclization. This endows the resultant azabenzannulated PDI 4 a planar configuration as well as electron deficient pentagonal ring. As a result, the electronic mobility of 4 is almost two orders of magnitude higher than that of the nonfused azabenzannulated PDI 2. This work shall pave a new avenue in elevating the performance of azabenzannulated PDI in organic electronics.

Construction of an Artificial Sequential Light-Harvesting System and White-Light Material Utilizing Supramolecular Gels.

The molecular (pyren-1-yloxy)-acetic acid (Py) with excellent fluorescence properties was synthesized from 1-hydroxypyrene (Hp) and formed a supramolecular gel with an acid-base stimulus response in dimethylformamide and water. On the basis of gel, the fluorescent dye perylene 3, 9-dicarbxylic acid, and rhodamine 6g were added successively to construct a step-by-step artificial light-harvesting system, so that the fluorescence color changed from blue-purple to green to red, and white light emission was realized by adjusting the ratio of donors and acceptors.

Solar overall water-splitting by a spin-hybrid all-organic semiconductor

Direct solar-to-hydrogen conversion from pure water using all-organic heterogeneous catalysts remains elusive. The challenges are twofold: (i) full-band low-frequent photons in the solar spectrum cannot be harnessed into a unified S1 excited state for water-splitting based on the common Kasha-allowed S0 → S1 excitation; (ii) the H+ → H2 evolution suffers the high overpotential on pristine organic surfaces. Here, we report an organic molecular crystal nanobelt through the self-assembly of spin-one open-shell perylene diimide diradical anions (:PDI2-) and their tautomeric spin-zero closed-shell quinoid isomers (PDI2-). The self-assembled :PDI2-/PDI2- crystal nanobelt alters the spin-dependent excitation evolution, leading to spin-allowed S0S1 → 1(TT) → T1 + T1 singlet fission under visible-light (420 nm~700 nm) and a spin-forbidden S0 → T1 transition under near-infrared (700 nm~1100 nm) within spin-hybrid chromophores. With a triplet-triplet annihilation upconversion, a newly formed S1 excited state on the diradical-quinoid hybrid induces the H+ reduction through a favorable hydrophilic diradical-mediated electron transfer, which enables simultaneous H2 and O2 production from pure water with an average apparent quantum yield over 1.5% under the visible to near-infrared solar spectrum.

Carrier transport and mesomorphic properties of deformable fluorinated perylene bisimide bearing disiloxane chains

We synthesized liquid crystalline difluorinated perylene bisimide derivatives bearing oligosiloxane moieties. At room temperature, these compounds exhibited columnar phases which were stabilized thermodynamically, compared to that of a non-fluorinated analog. The absorption bands in the thin films of the fluorinated compounds exhibited a slight bathochromic shift compared to that in the solution state, indicating a weak electronic coupling between the fluorinated perylene bisimide cores in the columnar phases. The electron mobilities in the columnar phases of the difluorinated compounds were determined to be on the order of 10−2 cm2V−1s−1 at room temperature by the time-of-flight measurements. The LUMO levels of the difluorinated compounds were lowered by 0.1 eV from that of non-fluorinated analog. Anion radicals of the fluorinated compounds were stable as that of the non-fluorinated analog while dianions of the fluorinated compounds were unstable unlike that of the non-fluorinated analog. The difluorinated compounds was soft waxy solid. In particular, the 1,7-difluorinated derivative is deformable to form various shapes at room temperature. A study on the surface morphology of the thin film indicated formation of microscopic grooves, which should enhance the softness of the compound.

Using Hybrid PDI-Fe3O4 Nanoparticles for Capturing Aliphatic Alcohols: Halogen Bonding vs. Lone Pair-π Interactions.

In this study, Fe3O4 nanoparticles (FeNPs) decorated with halogenated perylene diimides (PDIs) have been used for capturing VOCs (volatile organic compounds) through noncovalent binding. Concretely, we have used tetrachlorinated/brominated PDIs as well as a nonhalogenated PDI as a reference system. On the other hand, methanol, ethanol, propanol, and butanol were used as VOCs. Experimental studies along with theoretical calculations (the BP86-D3/def2-TZVPP level of theory) pointed to two possible and likely competitive binding modes (lone pair-π through the π-acidic surface of the PDI and a halogen bond via the σ-holes at the Cl/Br atoms). More in detail, thermal desorption (TD) experiments showed an increase in the VOC retention capacity upon increasing the length of the alkyl chain, suggesting a preference for the interaction with the PDI aromatic surface. In addition, the tetrachlorinated derivative showed larger VOC retention times compared to the tetrabrominated analog. These results were complemented by several state-of-the-art computational tools, such as the electrostatic surface potential analysis, the Quantum Theory of Atoms in Molecules (QTAIM), as well as the noncovalent interaction plot (NCIplot) visual index, which were helpful to rationalize the role of each interaction in the VOC···PDI recognition phenomena.

Excited Charge Transfer Promoted Electron Transfer in all Perylenediimide Derived, Wide-Band Capturing Conjugates: A Mimicry of the Early Events of Natural Photosynthesis.

Fundamental discoveries in electron transfer advance scientific and technological advancements. It is suggested that in plant and bacterial photosynthesis, the primary donor, a chlorophyll or bacteriochlorophyll dimer, forms an initial excited symmetry-breaking charge transfer state (1CT*) upon photoexcitation that subsequently promotes sequential electron transfer (ET) events. This is unlike monomeric photosensitizer-bearing donor-acceptor dyads where ET occurs from the excited donor or acceptor (1D* or 1A*). In the present study, we successfully demonstrated the former photochemical event using an excited charge transfer molecule as a donor. Electron-deficient perylenediimide (PDI) is functionalized with three electron-rich piperidine entities at the bay positions, resulting in a far-red emitting CT molecule (DCT). Further, this molecule is covalently linked to another PDI (APDI) carrying no substituents at the bay positions, resulting in wide-band capturing DCT-APDI conjugates. Selective excitation of the CT band of DCT in these conjugates leads to an initial 1DCT* that undergoes subsequent ET involving APDI, resulting in DCT +-APDI - charge separation product (kCS~109 s-1). Conversely, when APDI was directly excited, ultrafast energy transfer (ENT) from 1APDI* to DCT (kENT~1011 s-1) followed by ET from 1DCT* to PDI is witnessed. While increasing solvent polarity improved kCS rates, for a given solvent, the magnitude of the kCS values was almost the same, irrespective of the excitation wavelengths. The present findings demonstrate ET from an initial CT state to an acceptor is key to understanding the intricate ET events in complex natural and bacterial photosynthetic systems possessing multiple redox- and photoactive entities.

Low-aggregated multi-color perylene diimide derivatives and their photo-thermal stability in color films

Perylene diimide derivatives (PDIs) have potential applications in organic semiconductor devices owing to their high absorption coefficients and chemical persistency. However, molecular aggregation and inferior thermal stability limit their preparation and application as color-film devices. In addressing this issue, we designed a series of PDIs by introducing different steric hindrance group (propyl isobutyl polyhedral oligomeric silsesquioxane (propyl isobutyl POSS), isoctyl, and 2-octyldodecyl) at the terminal position and electron-donating group (alkoxy, alkyl-substituted phenoxy or alkylamino) at the bay position. Density Functional Theory (DFT) calculations demonstrated that the substitution of propyl isobutyl POSS at the terminal position and electron-donating groups (2,4-di-tert-butylphenoxy, tert-butyloxy, and diethylamino) at bay position of the perylene chromophore had synergistic effect on reducing the aggregation of PDIs, and the bay substitution could achieve PDIs with different colors due to the connection of the substituent group with the conjugated system of the PDIs. Based on the results of calculation, four low-aggregated multi-color PDIs were synthesized for the first time. Their color films displayed excellent photo-thermal stability because of the introduction of propyl isobutyl POSS moieties (Td > 230 °C, color difference ΔE < 3). This work provides important insights into the design of multi-color PDIs with low aggregation and high photo-thermal stabilities, which holds great promise for the organic electronics research field.

Perylene diimide tethered with multi-POSS nanocages for polymer composite material with nonlinear optical property

A novel perylene diimide derivative tethered with three polyhedral oligosilsesquioxane nanocages (PDI-3POSS) was designed and synthesized as an organic-inorganic hybrid with donor-acceptor (D-A) conjugated structure. The experimental results reveal that the introduction of multi-POSS nanocages endows PDI-3POSS with inhibition of continuous PDI-stacking and subsequent good dispersivity in polymer matrix. Moreover, the molecular simulation indicates that PDI-3POSS can exhibit intense intramolecular charge transfer due to the electron-donating modification at the bay position. As a result, PMMA film doped with PDI-3POSS possesses unique reverse saturable absorption property and potential optical limiting application. It is hoped that the synergistic modification of multi-nanocages and D-A structure may be a new strategy to prepare composite materials with both good dispersivity and novel nonlinear optical property.

Polyvinyl alcohol covalently grafted perylene imide for high-performance light-conversion film

To suppress the aggregation caused quenching of perylene diimide (PDI) derivatives, and improve photostability of PDI derivatives, a polyvinyl alcohol grafted copolymer (PVA-PDIE) was prepared by transesterification of a perylene imide derivative (PDIE) and polyvinyl alcohol (PVA). PDIE was characterized by H-NMR and HR-MS, and PVA-PDIE was confirmed by IR, water resistance, and control experiments. PVA-PDIE film showed high quantum yield (0.75), and matching emission maxima (620 nm). More importantly, PVA-PDIE film had excellent thermal stability and photostability, high transmittance and light conversion quality. Furthermore, the decomposition temperature of PVA-PDIE film was up to 240 °C, while emission intensity maintained at 95 % and 96 % of the initial value in turn after intensified ultraviolet radiation of 40 h and sunlight radiation of 40 days. Compared with the PVA blank film, photosynthetic photon flux density (PFD) of PVA-PDIE film increased by 25 % and 34 % for red orange light and near-infrared light respectively, and decreased by 39 %, 27 %, and 24 % for ultraviolet light, blue violet light, and yellow-green light in sequence, indicating outstanding light conversion performance. Meanwhile, PVA-PDIE film had excellent transparency.

Pathway Selection in Temporal Evolution of Supramolecular Polymers of Ionic π-Systems: Amphiphilic Organic Solvent Dictates the Fate of Water.

Understanding solvent-solute interactions is essential to designing and synthesising soft materials with tailor-made functions. Although the interaction of the solute with the solvent mixture is more complex than the single solvent medium, solvent mixtures are exciting to unfold several unforeseen phenomena in supramolecular chemistry. Here, we report two unforeseen pathways observed during the hierarchical assembly of cationic perylene diimides (cPDIs) in water and amphiphilic organic solvent (AOS) mixtures. When the aqueous supramolecular polymers (SPs) of cPDIs are injected into AOS, initially kinetically trapped short SPs are formed, which gradually transform into thermodynamically stable high aspect ratio SP networks. Using various experimental and theoretical investigations, we found that this temporal evolution follows two distinct pathways depending on the nature of the water-AOS interactions. If the AOS is isopropanol (IPA), water is released from cPDIs into bulk IPA due to strong hydrogen bonding interactions, which further decreases the monomer concentration of cPDIs (Pathway-1). In the case of dioxane AOS, cPDI monomer concentration further increases as water is retained among cPDIs (Pathway-2) due to relatively weak interactions between dioxane and water. Interestingly, these two pathways are accelerated by external stimuli such as heat and mechanical agitation.

Bifunctional fluorescent probe for fluoride and copper(Ⅱ) based on perylene diimide derivative and its application in cell imaging

A bifunctional fluorescent probe P1 based on perylene diimide derivative (PDI) was developed, demonstrating high sensitivity and selectivity for the rapid detection of fluoride (F-) and copper (Cu2+). The fluorescence of P1 was quenched upon interaction with F- and enhanced upon interaction with Cu2+. The concentration ranges for fluorescent detection of F- and Cu2+ are 0 ∼ 4 × 10-5 M and 0 ∼ 2.4 × 10-5 M, respectively. The stoichiometry of the complex formed between Cu2+ and P1 or F− and P1 was 1:1. The probe displays detection limits of 0.16 and 0.21 μM and binding constants (Ksv) of 3.92 × 104 and 1.72 × 104 M−1 for the detection of F- and Cu2+, respectively. The sensing mechanism and binding mode of P1 with F- and Cu2+ were investigated. The fluorescence quenching/enhancement of P1 was controlled by a photoinduced electron-transfer (PET) process. Furthermore, the ability of the probe to detect intracellular F- and Cu2+ was assessed using cell imaging techniques.

End-to-End Bent Perylene Bisimide Cyclophanes by Double Sulfur Extrusion.

Bending inherently planar π-cores consisting of only six-membered rings has traditionally been challenging because a powerful transformation is required to compensate for the significant strain energy associated with bending. Herein, we demonstrate that sulfur extrusion can achieve substantial molecular bending of a perylene structure to form a substructure of a Vögtle belt, a proposed yet hitherto elusive carbon nanotube fragment. Bent perylene bisimide (PBI) derivatives were synthesized through a double-sulfur-extrusion reaction from the corresponding sulfur-containing V-shaped precursors with an internal alkyl tether. The effect of bending the inherently planar PBI core, which is a recent topic of interest for the design of advanced organic electronic and optoelectronic materials, was investigated systematically. Increasing the curvature leads to a red shift in the absorption and emission spectra, while the fluorescence quantum yields remain high. This stands in contrast with the nonemissive features of previously reported nonplanar PBI derivatives based on conjugative tethers. Detailed photophysical measurements indicated that the increasing curvature with shorter alkyl tethers (i) slightly facilitates intersystem crossing and (ii) significantly suppresses the internal conversion in the excited state of the present bent PBI derivatives. The latter characteristics originate from the restricted dynamic motion associated with the charge-transfer (CT) character between the core chromophores and the N-aryl units.

Synthesis of Thionated Perylenediimides: State of the Art and First Investigations of an Alternative to Lawesson's Reagent.

Perylenediimides (PDIs) are composed of a central perylene ring, on which are grafted two imide groups at the peri positions. Thionated PDIs are characterized by the substitution of one or more oxygen atoms of these imide functions with sulfur atoms. This structural modification alters the electronic properties with a redshift of the optical absorption accompanied by modification of the charge transport characteristics compared to their non-thionated counterparts. These properties make them suitable candidates for applications in optoelectronic devices, such as organic light-emitting diodes and organic photovoltaics. Moreover, the presence of sulfur atom(s) can favor the promotion of reactive oxygen species production for photodynamic and photothermal therapies. These thionated PDIs can be synthesized through the post-functionalization of PDIs by using a sulfurizing reagent. Nevertheless, the main drawbacks remain the difficulties in adjusting the degree of thionation and obtaining tri- and tetrathionated PDIs. Up to now, this thionation reaction has been described almost exclusively using Lawesson's reagent. In the current study, we present our first investigations into an alternative reagent to enhance selectivity and achieve a greater degree of thionation. The association of phosphorus pentasulfide with hexamethyldisiloxane (Curphey's reagent) clearly demonstrated higher reactivity compared with Lawesson's reagent to attain multi-thionated PDIs.

A perylene diimide probe for NIR-II fluorescence imaging guided photothermal and type I/type II photodynamic synergistic therapy

Phototherapy has garnered significant attention in the past decade. Photothermal and photodynamic synergistic therapy combined with NIR fluorescence imaging has been one of the most attractive treatment options because of the deep tissue penetration, high selectivity and excellent therapeutic effect. Benefiting from the superb photometrics and ease of modification, perylene diimide (PDI) and its derivatives have been employed as sensing probes and therapeutic agents in the biological and biomedical research fields, and exhibiting excellent potential. Herein, we reported the development of a novel organic small-molecule phototherapeutic agent, PDI-TN. The absorption of PDI-TN extends into the NIR region, which provides feasibility for NIR phototherapy. PDI-TN overcomes the traditional Aggregation-Caused Quenching (ACQ) effect and exhibits typical characteristics of Aggregation-Induced Emission (AIE). Subsequently, PDI-TN NPs were obtained by using an amphiphilic triblock copolymer F127 to encapsulate PDI-TN. Interestingly, the PDI-TN NPs not only exhibit satisfactory photothermal effects, but also can generate O2•- and 1O2 through type I and type II pathways, respectively. Additionally, the PDI-TN NPs emit strong fluorescence in the NIR-II region, and show outstanding therapeutic potential for in vivo NIR-II fluorescence imaging. To our knowledge, PDI-TN is the first PDI derivative used for NIR-II fluorescence imaging-guided photodynamic and photothermal synergistic therapy, which suggests excellent potential for future biological/biomedical applications.

Tuning Structure and Properties of a Ferromagnetic Organic Semiconductor via a Magnetic Field-Modified Reduction Process

The development of novel synthesis and assembly strategies is critical to achieving a ferromagnetic organic semiconductor with high Curie temperature. In this study, we report a high magnetic field (HMF)-modified solvothermal approach for the reduction in neutral perylene diimide (PDI) into the dianion species to prepare the PDI magnets comprising radical anions after subsequent oxidation processes. The PDI materials, assembled from the dianion solution by an HMF-modified reduction, exhibit a smaller crystallite size and an enlarged distance of the π-π stacking in the PDI aggregates. Furthermore, the PDI magnets obtained from the process under a 9T field reveal weakened ferromagnetism and the rapid degradation of electrical conductivity compared to those prepared without a magnetic field. Based on spectral and structural characterizations, such performance deterioration originates from the enhanced instability of the radical anions exposed to air, as well as the decreased crystallinity for the radical PDIs synthesized from the HMF-modified reduction process. This work demonstrates that magnetic fields offer an effective way in the material synthesis process to manipulate the structure and magnetic properties of the radical-based organic magnets.

Reinforcing Carrier‐Free Photothermal Nanodrugs Through Flavonol‐Driven Assembly

AbstractCarrier‐free nanodrugs that integrate chemodrugs and other therapeutic agents demonstrate good efficacy and minimized side effects, showing promise for combined therapy. However, a key challenge lies in enhancing the bioavailability and therapeutic potential of the nanodrugs through a controllable assembly process. Herein, a carrier‐free photothermal nanodrug (ZPQ NPs) is constructed through flavonol‐driven assembly with amine‐substituted perylene diimide for enhanced chemo‐photothermal combined cancer therapy. The flavonol, particularly quercetin, facilitates J‐aggregation of perylene diimide derivatives within the nanodrug and contributes to multiple improvements, including red‐shifted absorption, enhanced fluorescence intensity, improved photothermal conversion efficiency as well as excellent photostability. Moreover, the nanodrug also demonstrates enhanced cellular uptake and intracellular reactive oxygen species scavenging capability. The combination of quercetin and photothermal effect effectively kills cancer cells, as well as alleviates inflammation following photothermal therapy. Guided by in vivo fluorescence imaging, the application of ZPQ NPs results in complete tumor elimination and effectively inhibits tumor recurrence through chemo‐photothermal combined therapy. This work presents a straightforward strategy for constructing carrier‐free nanodrugs that exhibit simultaneous enhancements in both photophysical properties and biological activity.

Role of Intragap States in Sensitized Sb-Doped Tin Oxide Photoanodes for Solar Fuels Production.

In view of developing photoelectrosynthetic cells which are able to store solar energy in chemical bonds, water splitting is usually the reaction of choice when targeting hydrogen production. However, alternative approaches can be considered, aimed at substituting the anodic reaction of water oxidation with more commercially capitalizable oxidations. Among them, the production of bromine from bromide ions was investigated long back in the 1980s by Texas Instruments. Herein we present optimized perylene-diimide (PDI)-sensitized antimony-doped tin oxide (ATO) photoanodes enabling the photoinduced HBr splitting with >4 mA/cm2 photocurrent densities under 0.1 W/cm2 AM1.5G illumination and 91 ± 3% faradaic efficiencies for bromine production. These remarkable results, among the best currently reported for the photoelectrochemical Br- oxidation by dye sensitized photoanodes, are strongly related to the occupancy extent of ATO's intragap (IG) states, generated upon Sb-doping, as demonstrated by comparing their performances with PDI-sensitized analogues on both undoped SnO2- and TiO2-passivated ATO scaffolds by means of (spectro)electrochemistry and electrochemical impedance spectroscopy. The architecture of the ATO-PDI photoanodic assembly was further modified via the introduction of a molecular iridium-based water oxidation catalyst, thus proving the versatility of the proposed hybrid interfaces as photoanodic platforms for photoinduced oxidations in PEC devices.

Synthesis of Perylene Diimide Modified by POSS and its Assembly Behavior in Solution and SBS Matrix

In this work, Perylene diimide derivatives 1,7- POSS-PDI-C12 (PPC) were synthesized using 1,7-Br-PDI- C12, 18-crown-6 ether as phase transfer agent, K2CO3 as catalyst and THF as solvent in a reaction system. Subsequently, the POSS-SH group was successfully introduced into the perylene imide bay site in high yield. The chemical structure and molecular weight of the products were characterized by 1H-NMR, 13C-NMR, MALDI-TOF MS and FT-IR. The self-assembly behavior in different solvents was studied using the research solution self-assembly method. PPC remained in a single monomolecular state due to the bulky POSS group, which introduced large steric hindrance in the molecular packing, leading to the weakening of the π–π interactions. Then, the Composite thin films containing PPC in SBS was prepared. PPC do not exhibit significant force-chromic behavior owing to the dispersion of single- molecule states. This shows that in the construction of mechanochromic materials, chromophore molecules need to have a certain degree of aggregation in the matrix, but the aggregation degree should not be too high.

Self-Aggregation, Enhanced Guest-Binding Behavior, and Anion-Induced Agglutination of Cyclophane Dimers Linked with Florescent Perylene Diimide.

Cationic, anionic, and nonionic cyclophane dimers, 1a, 1b, and 1c, covalently linked with fluorescent perylene diimide were synthesized, respectively, as a host for aggregation-induced multivalent effects on guest-binding. These PDI-linked cyclophane dimers 1a and 1b, especially 1c, formed self-aggregates in H2O-rich solvents through π-stacking interactions. Critical aggregation concentrations of 1a, 1b, and 1c in H2O were 4.0 × 10-6, 4.0 × 10-6, and less than 0.1 × 10-6 M, respectively. The self-aggregates of the PDI-linked cyclophane dimers in H2O were several hundred nanometers in size by DLS and TEM measurements. In an aggregated state, 1a exhibited guest-binding abilities toward hydrophobic guests, such as 6-p-toluidinonaphthalene-2-sulfonate and 6-anilino-naphthalene-2-sulfonate. Moreover, anion-induced agglutination of 1a was observed upon the addition of phosphate ions, and its effectiveness was as follows: ATP > ADP > H2P2O72- > AMP ≈ PO43- > HPO42- > H2PO4-. The contribution of the adenine base of the nucleotides as a guest moiety used for effective agglutination was confirmed by 1H NMR spectroscopy.

Crystallization-driven tuneable lasing of perylene doped into the nematic liquid crystal

Versatile devices with tunable capabilities for controlling lasing wavelength and intensity are in high demand. Liquid crystals (LCs) exhibit immense potential for such applications, offering fine-tuning possibilities through external factors. On the other hand, laser technology is currently a research hotspot in optoelectronics, and also in practical applications. The recent market introduction of laser television marks a significant stride toward making such advanced technology accessible in every household. In synergy with laser pumping, the LCs unquestionably can be rediscovered. This study presents a comprehensive investigation into the crystallization phenomenon within a host-guest device, compact in size, free from moving parts, and integrating the liquid crystalline (LC) matrix doped with 3,4,9,10-tetra-(3-alcoxy-carbonyl)-perylene (THCP) dye. The focus lies in examining the influence of varying dye concentrations on multicolor fluorescence, lasing behavior, and device morphology. The systematic analysis of Random Lasing (RL) energy thresholds and the impact of DC voltage on light intensity modulation is demonstrated. Morphological changes were monitored in real-time using optical microscopy techniques, including crossed polarizer, and fluorescence imaging under 450 nm excitation. Utilizing advanced Transmission Electron Microscopy (TEM) techniques, we explore exceptional insights into our set of devices, providing novel information about the THCP crystallization process for the first time in the literature. To gain a comprehensive understanding of the crystal forming and molecular geometry we examined additionally the THCP dye, using X-ray diffraction and Raman spectroscopy. Furthermore, we showcase that varying the pumping energy enables multicolor tuning in the fabricated systems, presenting an attractive feature in the context of laser display technologies.