Peroxymonosulfate Activation Research Articles

Constructing High-performance Cobalt-based Environmental Catalysts from Spent Lithium-Ion Batteries: Unveiling Overlooked Roles of Copper and Aluminum from Current Collectors.

Converting spent lithium-ion batteries (LIBs) cathode materials into environmental catalysts has drawn more and more attention. Herein, we fabricated a Co3O4-based catalyst from spent LiCoO2 LIBs (Co3O4-LIBs) and found that the role of Al and Cu from current collectors on its performance is nonnegligible. The density functional theory calculations confirmed that the doping of Al and/or Cu upshifts the d-band center of Co. A Fenton-like reaction based on peroxymonosulfate (PMS) activation was adopted to evaluate its activity. Interestingly, Al doping strengthened chemisorption for PMS (from -2.615 eV to -2.623 eV) and shortened Co-O bond length (from 2.540 Å to 2.344 Å) between them, whereas Cu doping reduced interfacial charge-transfer resistance (from 28.347 kΩ to 6.689 kΩ) excepting for the enhancement of the above characteristics. As expected, the degradation activity toward bisphenol A of Co3O4-LIBs (0.523 min-1) was superior to that of Co3O4 prepared from commercial CoC2O4 (0.287 min-1). Simultaneously, the reasons for improved activity were further verified by comparing activity with catalysts doped Al and/or Cu into Co3O4. This work reveals the role of elements from current collectors on the performance of functional materials from spent LIBs, which is beneficial to the sustainable utilization of spent LIBs.

Oxygen Doping Cooperated with Co-N-Fe Dual-Catalytic Sites: Synergistic Mechanism for Catalytic Water Purification within Nanoconfined Membrane.

Atom-site catalysts, especially for graphitic carbon nitride-based catalysts, represents one of the most promising candidates in catalysis membrane for water decontamination. However, unravelling the intricate relationships between synthesis-structure-properties remains a great challenge. This study addressed the impacts of coordination environment and structure units of metal central sites based on Mantel test, correlation analysis and evolution of metal central sites. An optimized unconventional oxygen doping cooperated with Co-N-Fe dual-sites (OCN Co/Fe) exhibited synergistic mechanism for efficient peroxymonosulfate activation, which benefited from a significant increase in charge density at the active sites and the regulation in the natural population of orbitals, leading to selective generation of SO4 •-. Building upon these findings, the OCN-Co/Fe/PVDF composite membrane demonstrated a 33 min-1 ciprofloxacin (CIP) rejection efficiency and maintained over 96% CIP removal efficiency (over 24h) with an average permeance of 130.95 L m-2 h-1. Our work offers a fundamental guide for elucidating the definitive origin of catalytic performance in advance oxidation process (AOPs) to facilitate the rational design of separation catalysis membrane with improved performance and enhanced stability. This article is protected by copyright. All rights reserved.

Degradation of Bisphenol A by Nitrogen-Rich ZIF-8-Derived Carbon Materials-Activated Peroxymonosulfate

Bisphenol A (BPA), representing a class of organic pollutants, finds extensive applications in the pharmaceutical industry. However, its widespread use poses a significant hazard to both ecosystem integrity and human health. Advanced oxidation processes (AOPs) based on peroxymonosulfate (PMS) via heterogeneous catalysts are frequently proposed for treating persistent pollutants. In this study, the degradation performance of BPA in an oxidation system of PMS activated by transition metal sites anchored nitrogen-doped carbonaceous substrate (M-N-C) materials was investigated. As heterogeneous catalysts targeting the activation of peroxymonosulfate (PMS), M-N-C materials emerge as promising contenders poised to overcome the limitations encountered with traditional carbon materials, which often exhibit insufficient activity in the PMS activation process. Nevertheless, the amalgamation of metal sites during the synthesis process presents a formidable challenge to the structural design of M-N-C. Herein, employing ZIF-8 as the precursor of carbonaceous support, metal ions can readily penetrate the cage structure of the substrate, and the N-rich linkers serve as effective ligands for anchoring metal cations, thereby overcoming the awkward limitation. The research results of this study indicate BPA in water matrix can be effectively removed in the M-N-C/PMS system, in which the obtained nitrogen-rich ZIF-8-derived Cu-N-C presented excellent activity and stability on the PMS activation, as well as the outstanding resistance towards the variation of environmental factors. Moreover, the biological toxicity of BPA and its degradation intermediates were investigated via the Toxicity Estimation Software Tool (T.E.S.T.) based on the ECOSAR system.

Unraveling the degradation of levofloxacin using highly efficient β-cyclodextrin-modified copper ferrite through peroxymonosulfate activation: Mechanistic performance and degradation pathways

In this study, a highly magnetic β-cyclodextrin-modified copper ferrite (CuFe2O4@β-CD) catalyst was developed utilizing a hydrothermal method, which was subsequently utilized to degrade Levofloxacin (LEV) antibiotic in aqueous solution via heterogeneous activation of peroxymonosulfate (PMS). The findings demonstrated that the 98.87 % degradation of LEV was achieved with CuFe2O4@β-CD/PMS, much higher than that of pure CuFe2O4/PMS (87.78 %) within a 24-minute time frame under optimal parameters ([CuFe2O4@β-CD] = 0.4 g/L, [PMS] = 0.4 mM, [LEV] = 25 mg/L, pH = 6), and CuFe2O4@β-CD/PMS was present. The rate constant of CuFe2O4@β-CD/PMS (0.1608 min−1) was much greater than that of the CuFe2O4/PMS system (0.0822 min−1). The increased availability of active sites for PMS activation may be credited to the larger surface area (189.42 m2/g) of the CuFe2O4@β-CD catalyst in comparison to the pristine CuFe2O4 (87.76 m2/g), which facilitated the improved degradation of LEV. Additionally, the impact of various reaction parameters and intervening anions on the degradation of LEV was investigated. The emergence of free radicals (SO4•−, •OH, and 1O2) was corroborated via electron paramagnetic resonance and scavenging experiments. On the basis of recognizing reaction intermediates, a hypothetical degradation mechanism for LEV was developed. PMS activation was caused by the transformation of Cu+/Cu2+ and Fe3+/Fe2+ pairs, which was accomplished via radical and non-radical pathways. Also, CuFe2O4@β-CD demonstrated exceptional stability and retained its catalytic activity after five concurrent cycles. In conclusion, the CuFe2O4@β-CD catalyst demonstrated encouraging potential in the context of purifying LEV-contaminated water.

Efficient Catalytic Elimination of Toxic Volatile Organic Compounds via Advanced Oxidation Process Wet Scrubbing with Bifunctional Cobalt Sulfide/Activated Carbon Catalysts.

Advanced oxidation process (AOP) wet scrubber is a powerful and clean technology for organic pollutant treatment but still presents great challenges in removing the highly toxic and hydrophobic volatile organic compounds (VOCs). Herein, we elaborately designed a bifunctional cobalt sulfide (CoS2)/activated carbon (AC) catalyst to activate peroxymonosulfate (PMS) for efficient toxic VOC removal in an AOP wet scrubber. By combining the excellent VOC adsorption capacity of AC with the highly efficient PMS activation activity of CoS2, CoS2/AC can rapidly capture VOCs from the gas phase to proceed with the SO4•- and HO• radical-induced oxidation reaction. More than 90% of aromatic VOCs were removed over a wide pH range (3-11) with low Co ion leaching (0.19 mg/L). The electron-rich sulfur vacancies and low-valence Co species were the main active sites for PMS activation. SO4•- was mainly responsible for the initial oxidation of VOCs, while HO• and O2 acted in the subsequent ring-opening and mineralization processes of intermediates. No gaseous intermediates from VOC oxidation were detected, and the highly toxic liquid intermediates like benzene were also greatly decreased, thus effectively reducing the health toxicity associated with byproduct emissions. This work provided a comprehensive understanding of the deep oxidation of VOCs via AOP wet scrubber, significantly accelerating its application in environmental remediation.

Characteristics of Fe/C catalysts based on pyrolysis of ferric citrate and its peroxymonosulfate activation performance to degrade sulfadiazine in water.

Advanced oxidation techniques based on peroxysulfate activation have been paid much attention owing to their excellent performance in degrading stubborn pollutants in water. In response to the current situation that requires more raw materials and higher costs and involves more complicated processes for the preparation of Fe/C catalysts to activate persulfates, novel catalysts (Fe/C-700, Fe/C-800, Fe/C-900 and Fe/C-1000) were prepared by a high-temperature carbonization method at different pyrolysis temperatures (700, 800, 900 and 1000 °C) using inexpensive and environmentally friendly ferric citrate as raw material. Fe/C catalysts were characterized using SEM, EDS, XRD, XPS, and VSM and were screened for the activation of peroxymonosulfate (PMS) to degrade sulfadiazine (SDZ) in water, where Fe/C-900 exhibited higher efficiency. Thus, its activation performance for PMS to degrade SDZ was comprehensively investigated and the mechanisms of activation degradation were analyzed. The results showed that the degradation rate of 98.7% can be achieved to 10 mg L-1 SDZ by 0.1 g L-1 Fe/C-900 and 0.5 mmol L-1 PMS within 60 min. A wide range of solution pH, low catalyst dosage and good recycling performance were found in the Fe/C-900 application and the amount of iron ions dissolved at the end of the reaction was low (0.350 mg L-1). It was shown that both free radical and non-free radical pathways existed in the reaction system, where 1O2, SO4-˙ and O2-˙ played dominant roles in the degradation process of SDZ. The results could provide new ideas for the preparation of Fe/C catalysts and their heterogeneous activation for PMS to degrade stubborn organic pollutants in water.

Molten salt induced strong interaction between Co3O4 and montmorillonite for the promoted peroxymonosulfate activation toward tetracycline degradation

Cobalt-based materials exhibit great premises for activating peroxymonosulfate (PMS) toward water remediation. Generally, active Co species are anchored on the surface of supports to improve the utilization efficiency, yet the stability of the catalyst is difficult to resolve due to the weak interaction between the active species and the support. Herein, a molten salt method is employed to reinforce the interfacial interaction between Co3O4 and montmorillonite (Mt) support. The use of molten Na3PO4 can mitigate the dehydroxylation process of Mt, and thus the electronic structure of Co3O4 NPs can be regulated by the surface hydroxyl species more efficiently. Consequently, the prepared Co3O4/Mt displays an enhanced CoII/CoIII ratio, and the degradation of tetracycline (TC) could reach 99% in 7 min by the PMS-based advanced oxidation process. Meanwhile, the TC removal efficiency can still reach 96% after 8 cycles, and the Co ion leaching is over 10 times lower as compared with the catalyst prepared not using the molten salt. This study highlights the significance of the molten salt method for enhancing the strong interfacial interaction, which is crucial to regulating the nature of supported catalysts, and provide satisfactory Co-based catalyst for PMS activation toward TC degradation.

Visible-light-assisted peroxymonosulfate activation by metal-free g-C3N4 isotype heterojunction for water purification: Surface-activated complex and 1O2 dominated non-radical mechanisms

Visible-light-assisted peroxymonosulfate (PMS) activation is flourishing in wastewater decontamination, but exploiting safe and efficient activators remains challenging due to a deficient cognition of the activated mechanisms. Hereby, a metal-free g-C3N4 isotype heterojunction (HCN) was successfully synthesized and activated PMS under visible light. The Z-scheme isotype heterojunction significantly meliorated light absorption and carrier migration, thereby enhancing PMS activation. The optimal HCN + PMS system almost completely removed ranitidine (RAN) in 30 min with 7.46–8.48 times higher activity than the monomers. Through systematic experiments and characterizations, we proposed a non-radical mechanism of PMS activation, which generated predominated surface-activated complex and singlet oxygen (1O2) for pollutant removal. The surface-activated complex degraded RAN by drawing its electrons. This non-radical pathway exhibited tolerance towards background substances and pH fluctuations. Additionally, the broad-spectrum decontamination and recyclability of the system further enhanced its practical applicability. Notably, intermediate analyses confirmed the RAN degradation pathways predicted by theoretical calculations, with the resulting intermediates found to be non-toxic. This study significantly contributes to our understanding of the non-radical mechanisms of PMS activation on g-C3N4-based activators for micropollutant degradation.

N-Doped Co–Mn/C Dual Metal Oxide as an Activator of Peroxymonosulfate Considering Radical and Nonradical Pathways

N-Doped Co–Mn/C Dual Metal Oxide as an Activator of Peroxymonosulfate Considering Radical and Nonradical Pathways

Over-Reduced Core–Shell Au@CoOx-Co with Strong Interfacial Interactions for Photoassisted Peroxymonosulfate Activation

Over-Reduced Core–Shell Au@CoO_<i>x</i>-Co with Strong Interfacial Interactions for Photoassisted Peroxymonosulfate Activation

Modulation of Exposed Active Sites and Electronic Structure of Co-Doped Carbon Nitride Achieving Enhanced Activity toward Peroxymonosulfate Activation for Antibiotic Degradation

Modulation of Exposed Active Sites and Electronic Structure of Co-Doped Carbon Nitride Achieving Enhanced Activity toward Peroxymonosulfate Activation for Antibiotic Degradation

Precise Modulation of the Coordination Environment of Single Cu Site Catalysts to Regulate the Peroxymonosulfate Activation Pathway for Water Remediation.

Single atom site catalysts (SACs) with atomically dispersed active sites can be expected to be potential ideal catalysts for accurately modulating the persulfate activation pathway during the water remediation process because of their well-defined structure and the maximum metallic atom utilization. In this paper, a series of Cu SACs with different coordination environments were synthesized to elaborately regulate the peroxymonosulfate activation pathway in AOPs to clarify active species generation and transformation in water remediation. The degradation rate constants (kobs) of Cu-N2, Cu-N3, and Cu-N4 were 0.028, 0.021, and 0.015 min-1, respectively. Cu-N2 SACs exhibited a noticeable enhanced performance for bisphenol A (BPA) removal from water compared to that of the Cu-Nx SACs (x = 3, 4), accompanied by peroxymonosulfate (PMS) activation pathway variation. As shown by experimental and theoretical results, the PMS activation pathway was transformed from ROS to electron transfer with nitrogen coordination numbers decreasing from 4 to 2, which can be ascribed to the uneven charge distribution of Cu sites as well as upshifts in the d-band center, and thereby optimized electron transfer for PMS activation. Furthermore, the increasing nitrogen vacancies of single Cu site catalysts can also result in more unoccupied 3d orbitals of Cu atoms in SACs, thereby improving the intermediates' (PMS and BPA) adsorption-desorption process and BPA removal performance. These findings provided a beneficial approach for the coordination number regulation of SACs in water remediation.

Non-radical activation of peroxymonosulfate by modified activated carbon for efficient degradation of oxytetracycline: Mechanisms and applications

The application of heterogeneous metal-free catalysis for non-radical peroxymonosulfate (PMS) oxidation is of great significance because of its low environmental effects and mild oxidant dosage. The purpose of this study was to investigate the activation mechanism of PMS using acid-modified activated carbon and oxytetracycline (OTC) as a representative pollutant. Modified activated carbon (MAC)/PMS system was capable of achieving 100 % degradation efficiency of OTC within 60 min, with an observed rate constant (kobs) of 0.0414 min−1. The degradation of OTC is dominated by non-radical oxidation pathways involved in mediated singlet oxygen (1O2) and electron-transfer process through electron paramagnetic resonance (EPR) and radicals quenching studies. The activation of PMS is attributed to the structural defects of MAC, persistent free radicals, and oxygen functional groups such as C-OOH. Moreover, the MAC/PMS system consistently demonstrates high and reliable contaminant removal in various water matrices. A continuous-flow device utilizing MAC shows excellent performance in purifying micro-polluted water. Additionally, the degradation pathways of pollutants and changes in toxicity during the degradation process were identified through density functional theory (DFT) calculations, liquid chromatography-mass spectrometry (LC-MS), and toxicological analysis. Finally, the cultivation of green beans, peas, and wheat was found to significantly decrease the toxicity of contaminated water through degradation. This study proposes a low-cost method to enhance the activation pathway of non-radical PMS by utilizing modified activated carbon materials for pollutant remediation.

Encapsulating stable perovskite catalysts in hollow nanoreactors for enhanced pollutants degradation

Creating a microenvironment for enhanced peroxymonosulfate (PMS) activation is vital in advanced oxidation processes. The objective of this study was to fabricate nanoshells composed of titanium dioxide embedded with cobalt titanate nanoparticles of perovskite to act as nanoreactors for effectively initiating PMS and degrading contaminants. The unique porous structure and confined space of the nanoreactor facilitated reactant absorption and mass transfer to the active sites, resulting in exceptional catalytic performance for pollutant elimination. Experimental findings revealed close to 100% decomposition efficiency of 4-chlorophenol (4-CP) within an hour utilizing the nanoreactors over a wide pH range. The TiO2/CoTiO3 hollow nanoshells catalysts also displayed adaptability in disintegrating organic dyes and antibiotics. The radicals SO4•-, •OH, and non-radicals 1O2 were determined to be accountable for eliminating pollutants, as supported by trapping experiments and electron paramagnetic resonance spectra. The catalyst was confirmed as an electron donor and PMS as an electron acceptor through electrochemical tests and density functional theory calculations. This study underscores the potential of incorporating stable perovskite catalysts in hollow nanoreactors to enhance wastewater treatment.

Ruthenium decorated nickel-iron layered double hydroxides (NiFe-LDH) for promoting peroxymonosulfate activation and atrazine degradation

With the extensive use of atrazine (ATZ), its potential hazards to ecological environment and human health have raised public concerns. This study reports the effective degradation of ATZ via advanced oxidation processes (AOPs) using peroxymonosulfate (PMS) activated by heterogeneous catalysts of Ru loaded NiFe-LDH blossom nanosheets (Ru/NiFe-LDH). During AOPs, the highly dispersed Ru sites as the main catalytic centers and the NiFe-LDH substrate synergistically stimulated PMS to efficiently produce reactive oxygen species to oxidize ATZ. Under optimal conditions, the degradation activity of ATZ by 5.8Ru/NiFe-LDH/PMS system reached 100% within 90 min. Additionally, it also exhibited good environmental applicability. Besides, electron paramagnetic resonance along with quenching experiments illustrated the production of 1O2, O2• −, •OH, SO4• − and surface-bond radicals during the degradation, where 1O2, •OH and surface-bond radicals were further identified as the dominant oxygen species for the oxidation. The ATZ degradation pathway was determined using the liquid chromatography-mass spectrometry to discern the intermediate products, e.g., dealkylation, alkylic-hydroxylation and dechlororination-hydroxylation processes. This work holds a potential application value for the removal of atrazine and other pollutants.

Nanoarchitectonics of ternary Zn-Mn-Co oxides for efficient peroxymonosulfate activation and antibiotics degradation via accelerating electron transfer

In this work, a new nanoarchitectonics of ZnO/Mn3O4/Co3O4 (ZnMnCoO) was prepared by solvothermal and calcining processes, and used to degrade tetracycline (TC) with peroxymonosulfate (PMS) as oxidant. Coupling of trace Co3O4 (1.48 wt% Co) and difference in work functions of ZnO, Mn3O4, Co3O4 enabled ZnMnCoO to possess good PMS activation performance. 97.8% of TC was degraded in 30 min with reactive rate constant of 0.166 min–1, which was 2.6 and 1.4 times higher than those of Mn3O4/PMS and ZnO/Mn3O4/PMS systems, respectively. It was found that SO4•–, O2•−, 1O2, and complex-mediated electron transfer played the main roles in oxidizing TC. In addition, ZnMnCoO was attached to a polytetrafluoroethylene microfiltration membrane to degrade TC via a flow-through device, and 92.4% of TC (10 ppm TC, tap water) and 78.2% of total organic carbon were removed in 120 min. This study designs a novel composite with low Co content to efficiently activate PMS and degrade antibiotics.

Insights into atomic arrangement in CuMnO2 with tailored exposed crystal facets for effectively micropollutant oxidation via peroxymonosulfate activation

Crystal facet engineering of bimetallic ABO2 oxides is regarded as decisive strategy for regulation of catalytic activity, whereas precisely identifying the intrinsic mechanism of facet-dependent activity are still significant challenging. Herein, crednerite CuMnO2 nanoflake material with tailored crystal facets were synthesized and identified as efficient peroxymonosulfate (PMS) activators, in which CuMnO2-160 catalyst with exposed (201) facet exhibited more superior catalytic efficiency compared to CuMnO2-80 with (020) facet towards p-hydroxybenzoic acid (HBA) oxidation. Notably, CuMnO2-160 demonstrated substantial activity across a wide pH range even under high concentration inorganic anions and humic acid (HA). Quenching experiments and EPR spectra elucidated the crucial reactive species of •OH and SO4•-, with 1O2 playing an auxiliary role in HBA degradation. Computational analysis and characterization results collectively revealed that PMS molecules adopted two distinct adsorption modes on different CuMnO2 facets, and the PMS adsorption-activation behavior was significantly altered by detailed atom arrangement of CuMnO2 in tailored exposed facets, thereby lowering the charge transfer energy barrier to favor PMS bonding interaction on (201) facet. This study systematically underscores the catalyst microstructure and crystal facet dominated PMS activation behavior and oxidation mechanism, providing valuable and novel insights for further understanding of crystal facets and the morphology control relied catalytic mechanism.

Photo-Fenton-like degradation of tetracycline through peroxymonosulfate activation over 2D BiOBr/FeOOH nanosheets and membrane application

The selection of photosensitizer substrates with high photocatalytic efficiency is crucial for leveraging the advantages of metal-based materials in photo-Fenton-like process. Herein, we report a novel 2D layered BiOBr/FeOOH nanosheets equipped with a built-in electric field (BIEF) to activate peroxymonosulfate (PMS) for the degradation of tetracycline (TC). The photocatalytic efficiency of BiOBr is enhanced by fine-tuning the Br source quantity. Both experimental and theoretical analyses confirm that BIEF at the BiOBr/FeOOH heterointerface expedites the movement of photogenerated electrons, significantly boosting both photocatalytic and photo-Fenton-like activities. The BiOBr/FeOOH + PMS + Vis system exhibits a high TC removal rate of 96 % with only 0.24 mM of PMS and nearly 100 % of PMS utilization. Moreover, affixing BiOBr/FeOOH nanosheets onto a PVDF microfiltration membrane, we establish a continuous flow reactor system for antibiotic wastewater treatment. This system demonstrates a remarkable TC removal efficiency consistently above 97.5 % for 6 h of continuous injection, underscoring its practicality and potential for real-world applications.

Natural soil as the peroxymonosulfate activator for efficient remediation and detoxification of bisphenol A: Nonradical-dominated mechanism and the change of soil properties

Peroxymonosulfate (PMS) has been extensively applied in soil refractory organics remediation, but studies without an activator were scarce. Besides, the role of soil as well as the interaction between the soil constituents and PMS remained unclear. Using bisphenol A (BPA) as a model contaminant, our findings demonstrated that soil could efficiently activate PMS for BPA abatement in water and slurry. Free Fe oxides, especially crystalline Fe oxides in soil, were primarily responsible for PMS activation through nonradical pathways (singlet oxygen) for BPA removal, but soil organic matter (SOM) might inhibit the process. Moreover, BPA elimination was almost not inhibited by the addition of anions (Cl−, NO3−, HCO3−, and SO42−) and humic acid, but could be promoted by cations (Fe3+ and Mn2+). PMS oxidation caused an insignificant impact on the bioavailability of heavy metals, except for Fe, Mn, SOM, pH, total phosphorus (TP) content, soil composition, and crystal structure have not changed obviously after PMS treatment. BPA decomposition pathways were proposed based on the intermediates identified. Furthermore, the phytotoxicity of BPA − polluted soil was significantly reduced after PMS remediation in terms of crop growth indexes. Overall, the study provided new insights into the crucial role of soil constituents in PMS activation and inspired more energy or catalyst − saving soil remediation strategies.

Salt assistant bimetallic sludge-derived porous carbon for efficient peroxymonosulfate activation

The development of cost-effective, environmentally benign, and high-performance peroxymonosulfate (PMS) activation towards wastewater treatment is still considered a challenge. In this work, the sludge-derived porous carbon loaded with bimetal oxides (DSC-FeMn) was fabricated by molten salt assistant strategy using the combination of zinc chloride, metal ions and Fe containing sludge. The obtained DSC-FeMn exhibited high catalytic activity for nearly 100 % 4-chlorophenol (4-CP) removal within 30 min with the k of 0.304 min−1, which was 1.07 and 11.94 times that of the single Fe and Mn-sludge-derived carbon (DSC-Fe, DSC-Mn), respectively. Quenching experiments, electron paramagnetic resonance tests (EPR), X-ray photoelectron spectroscopy (XPS), H2-temperature programmed reduction (H2-TPR) and electrochemical experiments proved that the radical pathway, dominated by OH and SO4−, led to the excellent degradation performance of DSC-FeMn, which was attributed to the redox cycling between Fe and Mn. This study provides a new idea for sludge resource utilization, and it deepens the understanding of the mechanism of PMS activation by the synergistic interaction between bimetal.