Permissible Limits Research Articles

Assessment of microbial properties, and heavy metals contents of surface water and ground water samples In Ureje and Ireje, Ekiti State, Nigeria.

Water is everywhere, · it is the most basic and necessary element of life, as well as the most important and abundant compound in the ecosystem. Standard methods were used to evaluate the physicochemical properties, microbial properties, and heavy metal content of river and well water samples in Ekiti State, South-West Nigeria. Important parameter like pH, electrical conductivity, total dissolved solids, DO, BOD, turbidity, total alkalinity, total hardness, heavy metals and microbial properties are determined. The research work indicated that temperature, odour, pH, alkalinity, TDS, biochemical oxygen demand, DO, chloride, nitrate and turbidity were within the range of WHO permissible limits for drinking water while color, Conductivity, iron and manganese were above the WHO permissible limits. The study also indicated that the microbial contents such as total viable count, yeast/mold and coliform were above the WHO permissible limits for drinking. These results show that the water sources were slightly contaminated and unsafe for human consumption. This water must be treated before it may be consumed or used for domestic application.

Comparative study of air quality index of two metropolitan cities (Lucknow and Kanpur) in Year-2023

In 2023, it was declared that the Bangladesh at the first place and then Pakistan, after which the most polluted country is India at the third place. Polluted air is becoming a very considerate issue all over the world. This study is all about comparing the air quality of two metro cities, Lucknow and Kanpur during (November 2022- October,2023) buy monitoring and assessment of few selective basic AQI air pollutants namely Particulate Matter (PM10) , Sulphur dioxide (SO2), Nitrogen dioxide (NO2) concentrations and also AQI of Lucknow and Kanpur at 5 representative locations categorized as residential, commercial and industrial areas. Residential area in Lucknow (Mahanagar and Aliganj) and in Kanpur (Kidwai Nagar and Shastri Nagar), Commercial areas in Lucknow (Hazarat Ganj and Ansal T.C.) and in Kanpur (Zareeb Chauki and Ramadevi), Industrial area Talkatora in Lucknow and Panki in Kanpur have been taken under consideration. The result found that 24 hours concentration of PM10 were in the range of 76.40 to 261.19 µg/m3 in Lucknow and 74.68 to 400.67 µg/m3 in Kanpur with an average of 174.34 and 160.36 µg/m3, respectively. The average value of PM10 was above as per the guideline of WHO and permissible limit prescribed by NAAQ in both the cities. Similarly, 24 hours average concentration of SO2 was below the prescribed level of NAAQ in Lucknow and Kanpur which was in the range of 5.33 to 12.70 µg/m3 in Lucknow and 2.00 to 9.53 µg/m3 in Kanpur with an average of 8.71 and 7.19 µg/m3, respectively. The 24 hours average concentration of Nitrogen dioxide (NO2) was below prescribed level of NAAQ in Lucknow and Kanpur. In Lucknow it was in the range of 13.83 to 48.01 µg/m3 and in Kanpur 21.45 to 64.02 µg/m3 with an average of 29.45 and 50.14 µg/m3, respectively. The 24 hours AQI was reported in the range of 76 to 211 in Lucknow and 75 to 363 in Kanpur with an average of 150.84 and 142.76 respectively which is greater moderate to severe by NAAQ and WHO guideline throughout the year. Ultimately, this entire study is related to human health because polluted air gives rise to various hazardous diseases such as asthma cancer, premature death cardiovascular diseases, respiratory tract diseases etc.

Prevalence and antibiotic susceptibility patterns of Escherichia coli and Staphylococcus aureus isolated from bioaerosols of local markets located in Agulu, Anambara State

There is a need for improved understanding of aerosol-acquired disease due to the increasing environmental load of antibiotic resistant bacteria. Multidrug-resistant Escherichia coli and Staphylococcus aureus are examples of bacteria for which the role of exposure to aerosolized organisms in disease transmission should be more closely evaluated globally. This study is aimed at evaluating the prevalence and antibiogram of S. aureus and E. coli present in market bioaerosols, located in Nwagu-Agulu, Anambra Nigeria. Impaction sample collection method was used to collect bioaerosol samples within the market using nutrient agar as the collection media, A combination of the cultural and microscopic features as well as selected biochemical tests were employed to identify the isolates. The Kirby-Bauer disk diffusion method was used to determine antibiotic resistance to selected commonly used antibiotics. A total of 76 S. aureus and 24 E. coli were isolated. Both organisms have been implicated in community-acquired infections. The most common bacteria isolated were Staphylococcus aureus. Varying levels of resistance were observed by these isolates to selected commonly use antibiotics. There is high prevalence of S. aureus and E. coli within Nwagu market Agulu, Anambra State, Eastern region of Nigeria. The organisms have very high rates of resistance to antibiotics (MDR) as reported by other workers. The government as well as Health professionals must play an important role in the prevention of community acquired infections via regular environmental monitoring of open markets bioaerosol and establishing a common permissible limits or concentration for bioaerosols within the markets.

A spectrometric analysis of variedly purified cinnabar in a siddha drug- linga chendhooram.

A siddha drug, linga chendhooram was prepared from cinnabar (lingam) and Citrullus colocynthis L. The transition of heavy metals concentration throughout theprocess were analysed to comprehend the significance ofdrug preparatory methods. In addition to that the main constituent cinnabar was purified from two different methods to comparatively analyse the significance of purification methods. Atomic absorption spectrometric studies were employed to obtain the concentration of class I heavy metals (lead, arsenic, cadmium and mercury) in all five samples- raw cinnabar (R), cinnabar purified (P1 and P2) from purification method 1 and 2, linga chendhooram (D1 and D2) prepared from P1 and P2. Based on the permissible limits given by The Ayurvedic Pharmacopoeia of India, except cadmium the concentrations of all other three heavy metals were found to be above the limit in P1, P2, D1 and D2. According to the oral Permitted Daily Exposure values for elemental impurities given in ICH Q3D(R1) Guidelines, D1 was within the permissible limits for both single and double oral doses whereas D2 showed a slight increase in the concentration of lead in a single oral dose itself. The drug preparatory method showed a reduction of the heavy metals concentration and comparative analysis of the purification methods revealed a substantial reduction of heavy metals concentration in the end drug D1 when compared with D2 showing that the methods of purification and drug preparation in siddha system plays a vital role in reducing the concentrations of heavy metals accordingly.

Evaluation of natural radioactivity and radiological hazards in water sample of Tounsa Sharif, South Punjab, Pakistan

Radioactive material, especially Uranium, is very dangerous for human beings, creatures, and plants. It has been documented that the groundwater of the Dera Ghazi Khan Division in Punjab is contaminated with 238U. In this communication, the groundwater of the Tehsil Taunsa located at Indus River has been investigated. 144 samples of drinking water were collected from 48 villages/towns located in the area of about 500 km2 of the city. The samples were collected in the month of June, August and November, to concentrate on the temperature impact over the Uranium concentration. All samples were analyzed for 238U concentration using a fluorometric technique. The fluorometric technique was applied after pre-treatment of the sample. The analysis of the result revealed that groundwater obtained from this region contains a high value of 238U contents. Among the 48 trials, 26 samples were found below the permissible limit, while the remaining samples contained 238U contents above the permissible level. The sample collected from areas like, Qarim Wala, Jhoke Jamki, Basti peer, Tibi Qaisrani, Pehar Adda & Malana contained even up to the alarming level (30 μg l−1 to 54 μg l−1). In addition, it was observed that the sampling period had a significant effect on the contents, which were most prominent in June. This area being almost annually flooded by water from Rodh Kohi, who originated from Koh-e-Suleiman, may lead to such a high concentration of 238U. The additional reason could be the topographical and geological structure of the earth from which the samples were collected.

Evaluation and health risk assessment of arsenic and potentially toxic elements pollution in groundwater of Majha Belt, Punjab, India.

Concentrations of potentially toxic elements (PTEs) like arsenic, uranium, iron, and nitrate in the groundwater of the Majha Belt (including Tarn Taran, Amritsar, Gurdaspur, and Pathankot districts) in Punjab, India were measured to evaluate the health risks associated with its consumption and daily use. The average concentrations of these elements in some locations exceeded the WHO-recommended values. Arsenic and iron toxicity levels were found to be higher in the Amritsar district, while uranium toxicity was more prevalent in Tarn Taran. The Trace Element Evaluation Index suggests that Amritsar is one of the districts most affected by toxic elements. According to the US Environmental Protection Agency's (USEPA) guidelines, the HQ values of U, Fe, and nitrate were less than one, indicating that there is no non-carcinogenic health risk for adults and children. However, the hazard quotient (HQ) value for arsenic was greater than one, indicating a higher possibility of health risk due to arsenic in the study area. The total hazard index values of 44.10% of samples were greater than four for arsenic, indicating that people in the Majha Belt are at a very high health risk due to the usage of water for drinking and domestic purposes. The cancer risk assessment values for arsenic in children (5.69E + 0) and adults (4.07E + 0) were higher than the accepted limit of USEPA (10-4 to 10-6) in the Majha Belt. The average radiological cancer risk values of U for children and adults were 8.68E-07 and 9.45E-06, respectively, which are well below the permissible limit of 1.67 × 10-4 suggested by the Atomic Energy Regulatory Board of DAE, India. The results of this study confirm that the residents of the Majha Belt who use contaminated groundwater are at a serious risk of exposure to arsenic in the Amritsar district and uranium in Tarn Taran district.

Evaluación de la calidad del agua subterránea para uso agrícola en Balzar, provincia del Guayas, Ecuador

Water is a natural and vital resource for living beings and ecosystems. Groundwater is of great importance for human consumption and agricultural activities, but over the years, it has become an increasingly scarce resource. The objective of this research was to evaluate the quality of groundwater extracted from wells used for crop irrigation in Balzar, province the Guayas, Ecuador. Four treatments and three repetitions were used; groundwater extracted from three wells plus a distilled water core. Physical, chemical, microbiological analyzes and a toxicity test with dark incubation were carried out on seeds of radish (Raphanus sativus), cocoa (Theobroma cacao) and corn (Zea mays). Turbidity exceeded permitted levels under TULSMA regulations and bicarbonate and chlorine levels exceeded the permitted limit. The microbiological analysis reflected fecal coliform values above 1000 UFC.100 mL-1 of water, indicating the presence of contaminants in the water sources. Phytotoxicity tests carried out with radish seeds showed a stimulation of radicle growth in well one and mild toxicity in wells two and three. For cocoa and corn seeds, moderate and mild toxicity was evident, respectively in the three wells. Although the maximum permissible limits were exceeded in some variables, the water from the three wells can be used for irrigation; however, there is a need to take measures to improve the quality of the water in these wells.

Treatment of Diesel-Contaminated Soil by Bioaugmented Composting with Bacteria from the Larva Tenebrio Molitor

In this study, soil composting and bioaugmentation processes were combined to remediate diesel-contaminated soil. Deciduous corn flour, wheat bran, and sawdust were used as co-substrates for soil composting. In addition, consortia of bacteria from the inner tract of the Tenebrio molitor larva were isolated and selected for the bioaugmentation of the composting reactors. It was observed that the isolated inoculum enhanced the treatment and combined with deciduous corn flour, a higher efficiency (87%) and a better removal rate (9.10% diesel removed/week) were registered. In soils with a concentration of 11,796 mg diesel/kg, this combined treatment reduced, in 10 weeks, the pollutant to values below the maximum permissible limits in soils stated by Mexican regulations.

Enhanced Hg(II) removal using thiourea-functionalized graphene oxide: Lab to pilot scale evaluation

Here, a thiourea-formaldehyde functionalized graphene oxide (G3DTF) is shown to effectively remove mercury (Hg) from various water sources, including ultrapure, bottled, and seawater. Over 99 % of the Hg in each water source is removed with only 10 mg/L of G3DTF resulting in a residual Hg concentration < 1 μg L−1. This concentration falls within the permissible limits established by the European drinking water guidelines. Notably, the presence of chlorocomplexes in seawater does not reduce the sorption efficiency of G3DTF. The sorption process across all water matrices can be accurately described by pseudo-second-order kinetics, with an R2 > 0.99 suggesting chemical interactions between Hg ions and G3DTF functional groups. The equilibrium isotherms demonstrate a remarkably high maximum adsorption capacity (qm) of 1039 mg g−1, exceeding the values reported in literature for the sorption of Hg on carbon-based materials. Remarkably, G3DTF retains its performance in the presence of other metal ions such as Cu, Cd, and Pb. Incorporating G3DTF into commercially activated carbon (AC) at a concentration as low as 2 wt % significantly enhances the efficiency of Hg(II) removal in fixed bed adsorption. The breakthrough curve exhibits enhanced absorption, attaining a 99.7 % removal of Hg(II) within a span of 2 h, surpassing the efficiency of AC. This relevant result represents a substantial advancement towards the adoption of graphene-based nanocomposites as effective commercial remediation materials.

Bioaccumulation of Lead and Mercury in Water, Sediment, and Fish Samples of Baraila Lake, Vaishali, Bihar.

In the current study, a protected subtropical wetland in Bihar (India), Baraila Lake, was investigated for heavy metal (Pb and Hg) status. These metals tend to bioaccumulate in fish, posing a concern to human health. This study reported the concentration of lead and mercury in water, sediment, and fish muscles of Baraila Lake in the year 2022. The samples were collected from pre-monsoon and post-monsoon seasons at four sampling locations, i.e., Loma, Dhulwar, Chakaiya, and Kawai Baraila, and were analyzed in triplicates. Lead concentration in water samples of all four sites of Baraila Lake observed during pre-monsoon and post-monsoon season exceeded the permissible limit for drinking water, while the mercury concentration of all sites was under the permissible limit in both seasons as prescribed by WHO. The extent of elemental pollution was evaluated using the Geo-accumulation index (Igeo), contamination factor (CF), contamination degree (Cd), ecological risk factor (Er), and the potential ecological risk index (Ri). Lead concentration in fish muscles of both seasons exceeded the permissible limit, while the concentration of mercury exceeded in Xenentodon cancila (0.55 ± 0.07µg/g) during the pre-monsoon season. Also, estimated daily intake (EDI), target hazard quotient (THQ), and hazard index (HI) were calculated in different fish muscles to assess potential human health risks. A higher THQ value of 1303 was observed in carnivore fish during the pre-monsoon season.

Optimal sizing and siting of single tunned passive filter based on jellyfish algorithm

&lt;p class="MsoNormal" style="margin-top: 10pt; text-align: justify;"&gt;&lt;span lang="EN-US" style="font-family: 'times new roman', times, serif; font-size: 14pt;"&gt;The presence of electrical harmonics in low voltage networks causes many problems for customers, the most important of which is the decrease in the power quality beyond the permissible limits, which leads to a decrease in voltage for long periods, a decrease in power factor and a large losses in the electrical network due to the deformation of the electric waveform of voltage and current. The aim of this paper is to design an optimal passive filter and its optimal location to suppress the harmonic distortion in the distribution system that results from nonlinear loads. This filter will use single objective functions and multi objective functions that will minimize the proposed filter cost, the real power losses, total harmonic distortion "THD" and individual harmonic distortion "IHD". This will be done under the equality constraint of power balance and some inequality constraints such as filter parameters limits, quality factor limits, voltage limits, harmonic distortion limits. The optimal passive filter parameters and location will be calculated using the modern optimization techniques such jellyfish optimization technique. IEEE 33 bus radial system will be used for demonstrating results obtained by the proposed method.&lt;/span&gt;&lt;/p&gt;

Development of standard operating procedure "Quality control of sodium chloride solution 0.9% (350 ml) for infusion (intra-pharmacy preparation) in pharmacy organizations manufacturing pharmaceuticals"

To develop a standard operating procedure (SOP) for quality control of 0.9% sodium chloride solution (350 ml) for infusion (intra-pharmacy preparation) in accordance with the requirements of the current regulatory documentation. Materials and Methods. Sodium chloride 0.9% sodium chloride solution (350 ml) for infusion (intra-pharmacy preparation) served as the object of the study. The SOP was developed taking into account the requirements of updated regulatory documents used in the field of quality control of medicines: Federal Law No. 61 dated 12.04.2010 "On Circulation of Medicines", Order of the Ministry of Health of the Russian Federation dated 22.05.2023 No. 249n, Order of the Ministry of Health of the Russian Federation dated 22.05.2023 No. 647n dated 31.08.2016, State Pharmacopoeia XV ed. and GOST R 52249-2009. Results. The main stages of the SOP in accordance with the current regulatory documentation are given, reagents, instruments and equipment required for testing are listed, mandatory and sample types of control are indicated. For this dosage form the mandatory controls will be organoleptic, written, control at release, physical and full chemical control. The methods of pH and authenticity tests are described, and the chemistry of qualitative reactions is given. For quantitative determination by the method of argentometry according to Mohr, the method of analysis is given, chemical reactions occurring during titration, the necessary calculations are made: the titer of silver nitrate solution of sodium chloride, the preliminary volume of titrant, the content of sodium chloride in the dosage form in grams. Permissible content limits are given in accordance with OFS.1.8.0001 "Medicinal preparations of pharmacy manufacture". Based on the results of the SOP development, a working instruction for quality control of sodium chloride solution 0.9% (350 ml) for infusion was drawn up. Conclusion. The presented SOP for quality control of sodium chloride solution 0.9% (350 ml) for infusion (intra-pharmacy preparation) describes the requirements for the organization and conditions of testing in assessing the quality of this dosage form and can be implemented in the work of manufacturing pharmacies as a detailed instruction for intra-pharmacy control.

Comprehensive Analysis of Groundwater Suitability for Irrigation in Rural Hyderabad, Sindh, Pakistan

An irrigation quality assessment for rural Hyderabad was made by determining the pH, EC, TDS and TH beside major cations and anions. This study employed various parameters to determine the suitability of groundwater for irrigation and its hydrochemistry. Permissible limits of major cations and anions revealed that approximately 26% of samples exceeded acceptable levels for Electrical Conductivity (EC), 87% for Ca2+, 89% for Mg2+, and 60% for Na+, while none exceeded the limits for K+. Conversely, 47% of samples for HCO3−, 91% for Cl−, and 100% for SO42−, NO3−, and CO32− proved suitability for irrigation. Notably, irrigation indices highlighted favorable results, with 100% conformity for SAR, SSP, RSP, and PI values, and substantial percentages of 78% and 85% for MH and KR values, respectively, affirming their suitability for irrigation practices. Employing the USSL diagram, 22%, 65%, and 11% of samples fall into the C2S1, C3S1, and C4S1 categories. According to the Wilcox diagram, 25%, 43%, 30%, and 2% are classified under C1, C2, C3, and C4 categories, respectively. The Gibbs ratio shows a concentration within the evaporation dominance, and CAI values showed positive ion exchange. Overall, Hyderabad’s rural areas are generally suitable for irrigation, apart from certain areas where water quality may not be acceptable for plants lacking high salt tolerance.

Assessment of textile effluent treatment by immobilized Trametes pubescens MB 89 for plant growth promotion.

Industrialization and the ever-increasing world population have diminished high-quality water resources for sustainable agriculture. It is imperative to effectively treat industrial effluent to render the treated water available for crop cultivation. This study aimed to assess the effectiveness of textile effluent treated with Trametes pubescens MB 89 in supporting maize cultivation. The fungal treatment reduced the amounts of Co, Pb and As in the textile effluent. The biological oxygen demand, total dissolved solids and total suspended solids were within the permissible limits in the treated effluent. The data indicated that the irrigation of maize with fungal-treated textile effluent improved the growth parameters of the plant including root, shoot length, leaf area and chlorophyll content. Moreover, better antioxidant activity, total phenol content and protein content in roots, stems and leaves of maize plants were obtained. Photosynthetic parameters (potential quantum yield, electron transport rate and fluorescence yield of non-photochemical losses other than heat) were also improved in the plants irrigated with treated effluent as compared to the control groups. In conclusion, the treatment of textile effluent with the immobilized T. pubescens presents a sustainable solution to minimize chemical pollution and effectively utilize water resources.

Hydrogeochemical and GIS Analysis of Groundwater Quality for Drinking and Irrigation Purposes in Kuzhithuraiyar Sub-Basin, Kanniyakumari District, Tamil Nadu, India

A hydrogeochemical analysis was conducted to find the suitability of the groundwater for drinking and irrigation purposes in the Kuzhithuraiyar sub-basin, Kanniyakumari district, Tamil Nadu, India. 48 groundwater samples were collected from the different locations of the study area during both the pre- and postmonsoon periods. This study assesses the groundwater quality for drinking and irrigation purposes based on the analytical results, water quality index, Wilcox plot, and irrigation parameters such as electrical conductance, Kelly’s ratio, sodium absorption ratio values, magnesium hazards, bicarbonate, and the residual sodium carbonate index. The pH values ranged from 8.5 to 6.5, suggesting generally acceptable conditions. TDS concentrations range from 24 to 1277 mg/L, whereas EC values range from 37.50 to 1996 μS/cm. It is observed from the collected samples that the pre-monsoon water samples TDS’ values were exceeded the recommended TDS limits than postmonsoon samples. Water quality indices indicate that 50% of premonsoon samples and 48% of postmonsoon samples are suitable for drinking. In total, 10% of samples are admissible to a doubtful category before and after the monsoon, 6% are good to permissible during the monsoon, and 84% are good to permissible. Kelly’s ratio shows that 56% and 48% of samples collected during the post- and premonsoon are suitable for irrigation, respectively, whereas the remaining samples are not. Due to magnesium hazards, 40% and 44% of pre- and postmonsoon samples are not suitable for irrigation. Overall, the postmonsoon samples exceeded the permissible TDS limit (1000 mg/L) by 10% and the premonsoon samples by 6. 13% of samples obtained after the monsoon and 19% collected before the monsoon have a potential salinity greater than three, indicating that these samples are unacceptable. The sustaining water quality and mitigating possible hazards in the Kuzhithuraiyar sub-basin require continuous monitoring and focused measures.

Remediate and sense: alginate beads empowered by portable electrochemical strips for copper ion removal and detection at environmental sites.

The contamination of environmental sites due to the presence of persistent species represents an important issue to be tackled. In particular, the presence of high levels of metals in soil and surface water is more frequent. One of the metals that sometimes exceeds the permissible limit set by regulatory authorities is copper. For instance, copper-based fungicides are widely used in viticulture. However, copper ions remain in soil and can enter the food chain, posing threats to human health and environmental safety. Although the rapid detection of copper ions using portable sensors is effective in enhancing early warning, it sometimes solves only half of the problem as remediation is not considered. In this paper, we present a novel integrated/portable approach that merges the remediation and sensing of metals by proposing a remediate-and-sense concept. In order to realize this concept, alginate beads were coupled with printed electrochemical strips for on-site copper detection. Within the same architecture, alginate beads were used to remove copper ions from the soil, and printed electrochemical strips were used to evaluate the efficacy of remediation at the point of need. The concept was applied towards soil containing copper ions at the parts per billion level; with few alginate beads and in the absence of additional species, copper ions were quantitatively removed from the matrix; and 3D printing allowed us to combine the printed strips and spheres within a unique tool. The architecture was optimized and the results were compared to inductively coupled plasma-mass spectrometry (ICP-MS) measurements with a recovery percentage of 90%-110%. It should be noted that this novel portable approach may be applied to other pollutants, opening new possibilities for integrated remediation and sensing.

Health Risk Assessment of Potentially Toxic Elements Contamination of Commonly Consumed Fruits in Bahir Dar Town, Northwest Ethiopia.

Excess accumulation of potentially toxic elements in frequently consumed fruits is a serious threat to human health. The aim of this study was to determine the levels of cadmium (Cd), chromium (Cr), copper (Cu), and lead (Pb) and to estimate the noncarcinogenic and carcinogenic health risks associated with their daily intake in commonly consumed fruits in Bahir Dar town, northwest Ethiopia. Three types of fruits (mango, banana, and orange) were collected using a simple random sampling method from open markets in Bahir Dar town. Wet digestion was used, and the concentration of potentially toxic elements was analyzed in the edible portion of the fruits. The average daily intake (ADI), hazard quotient (HQ), hazard index (HI), and target cancer risk (TCR) were estimated to assess the human health risks posed by the intake of those potentially toxic elements from the consumption of the studied fruits. The concentrations of Cr and Cu were lower than the maximum limit of normal values in mango, banana, and orange. However, the Pb and Cd concentrations (mg kg-1) in mango were 0.576 and 1.771, respectively, which exceeded the FAO/WHO recommended permissible limits of 0.3 mg kg-1 and 0.2 mg kg-1, respectively. The ADI of potentially toxic elements was found to be lower than the maximum permitted tolerable daily intake in the studied fruits, and the HI values (mgday-1 kg-1) of all studied potentially toxic elements were lower than one in banana and orange, except mango (3.69). The TCR values for Pb, Cd, and Cr in banana and orange were 7.16 × 10-4 and 7.15 × 10-4, respectively, which exceeded the recommended threshold risk limit (>1 × 10-4), but in mango (1.71 × 10-3), the level was above the moderate risk limit (>1 × 10-3). However, the TCR value in all the studied fruits was above the recommended safe limit (ILCR < 1 × 10-6) set by the United States Environmental Protection Agency (US-EPA). The study revealed that the consumption of mango fruit in the studied areas may pose noncarcinogenic and carcinogenic adverse health effects.

Level of Heavy Metals and Potential Ecological Risks in Irrigated Horticultural Farms in the Vicinity of Lake Ziway, Central Ethiopian Rift Valley Region.

Research on heavy metal pollution in horticultural farms located around lakes in the Central Ethiopian Rift Valley Region has focused on measuring the levels of heavy metals and their health implications. However, the ecological risks of horticultural farms contaminated with heavy metals in this region have not been studied. The current study addresses this gap by providing information on the degree of heavy metal contamination and the ecological risk associated with horticultural farms around Lake Ziway, using various pollution indices. An inductively coupled plasma optical emission spectrometer (ICP-OES) was used to measure the concentrations of nine heavy metals (As, Cd, Co, Cu, Cr, Ni, Pb, Hg, and Zn) in a total of 30 composite soil and irrigation water samples, each consisting of a mix of six subsamples. The results indicated that the mean concentrations of Hg, Cd, Pb, and Zn in soils collected from all the sampling sites exceeded the FAO/WHO maximum permissible limit (MPL). The values of both the contamination factor (CF) and contamination degree (Cd) of the heavy metals ranged from 0.04 to 2.66 and 2.81 to 6.14, respectively, indicating a low to medium level of contamination for both indices. The pollution load index (PLI) values of 0.451, 0.449, and 0.157 for sites 2, 1, and 3, respectively, indicate "unpolluted" to "moderately polluted" levels of heavy metal pollution. However, the ecological risk indices (ERIs) at sites 2 and 1 (158.92 and 141, respectively) showed a potentially high ecological risk due to soil pollution. Therefore, close monitoring and early intervention mechanisms must be in place to control pollution in the study area.

Physico-chemical and correlation study of ground drinking water of Tonk district of Rajasthan (India)

This study investigates the qualitative analysis of groundwater obtained from the Tonk district of Rajasthan to determine its suitability as potable water. Around 321 ground drinking water samples were collected and analysed for various physico-chemical characteristics including pH, electrical conductivity (EC), total dissolved solid (TDS), HCO3−, F−, Cl−, SO42−, NO3−, Ca2+, Mg2+, total hardness (TH) and total alkalinity (TA) in Tonk district of Rajasthan (India). The groundwater in the region is a little alkaline and hard. The EC during the pre-monsoon period varies from 434 to 7271 µS/cm, while in the post-monsoon period, it ranges from 356 to 8871 µS/cm. TDS of samples ranged between 285 to 5090 mg/L in the pre-monsoon and 247 to 6140 mg/L post-monsoon seasons. Few samples have EC, TDS, and TH levels higher than the permissible limit, restricts its usage as drinking water. The water quality in the study area varies from soft-fresh to hard-brackish in both pre- and post-monsoon seasons. Anion concentrations in analysed samples followed the order: HCO3− > Cl− > SO42− > NO3− > F−. Notably, the Water quality index (WQI) results for all collected samples fall within the range of 4.55–96.83, indicating they are considered safe and suitable for drinking purposes. Water quality data was analysed by correlation study and geochemical processes. A strong correlation between the Water Quality Index (WQI) and fluoride levels is found in both seasons. The geochemical analysis shows that most of the samples are in the rock water interaction zone, with some in the evaporation zone due to the high content of chloride ions. The groundwater chemistry appears to be influenced by rock-water interaction and evaporation sedimentation. The molar ratio of Ca2+/Mg2+ denotes calcite dissolution and silicate weathering revealing enrichment of Ca2+ and HCO3− ions in aquifer.

A study of the effect of organic acids (gallic acid and ascorbic acid) on the coloration and functionalization of wool yarns with Millettia laurentii sawdust natural dye

Wastewater from the textile industry, especially the dyeing sector, is a major contaminant for aquatic ecosystems. Synthetic dye compounds and metal salts from leftover mordant and dyeing baths are washed into rivers, endangering aquatic life and the environment. In regards to the current study’s examination of Millettia laurentii sawdust’s potential as a natural color source, eco-friendly organic acids (gallic acid and ascorbic acid) were studied in conjunction with small amounts of metal salts (aluminum sulfate, stannous chloride, copper sulfate, and ferrous sulfate) for enhancing the color shade palette with simultaneous functionalization (antimicrobial and UV-protection) of wool yarns. The effects of metal salts up to ecologically permissible concentration limits on the dyeing and functional properties were assessed in combination with organic acids. The study focused on optimizing dyeing variables including pH (2–8), temperature (65–95 °C), dye concentration (25–125% o.w.f.), and dyeing time (15–90 min) using a one-factor-at-a-time (OFT) optimization by determining the color depth (K/S) values on the wool yarns. The optimized dyeing conditions were pH of 4, temperature of 95 °C, dye concentration of 75.0% (o.w.f.), and dyeing time of 60 min. The color characteristics (CIEL*a*b*c*ho) and fastness (Wash, rub, and light) properties are evaluated comparatively against control dyed wool yarns using standard methods. The antimicrobial activity of control dyed and mordanted dyed wool yarns was evaluated in terms of the percentage microbial reduction of bacterial colonies. Metal salts especially ferrous sulfate in conjunction with gallic acid (Fe/GA) provided the highest average color strength (13.50) with a maximum percentage microbial reduction of 96.67%. UV protection ability was assessed by an Australian and New Zealand standards (AS/NZS 4399: 1996) method in terms of UPF values. UV protection levels were significantly improved by using binary combinations of organic acids and metal salts with the maximum protection offered by Fe/GA (97.66) and Sn/GA (97.90). Dyeing outcomes were significantly impacted by the chemical structure of organic acids (gallic acid and ascorbic acid) and the type of metal salts; the research proposes a more environmentally friendly natural dyeing process for the textile industry.