Periprosthetic Bone Remodeling Research Articles

Stress-shielding in aseptic loosening on the 3D printed acetabular cup in hip arthroplasty: review article

The increasing number of prosthetic hip replacement surgeries and their growing indication have led to a growing interest in understanding the factors that influence their long-term success. Total hip arthroplasty (THA) failure is mainly due to aseptic loosening. More rarely septic mobilization may occur. In the first case, many variables influence the bone-implant relationship and periprosthetic bone remodeling. Stress-shielding is the most evident but not fully explained manifestation of the bone implant interaction. Recently, three-dimensional (3D) printed titanium orthopedic implants have offered new perspectives in the field of hip prosthetics, enabling the customization and production of acetabular cups with enhanced biocompatibility. This review aims to evaluate the efficacy and reliability of 3D printed acetabular cups from the perspective of aseptic failure particularly related to the stress-shielding. The most recent clinical and preclinical studies will be reviewed, exploring the benefits and challenges associated with the use of these emerging technologies. Key factors, such as biocompatibility, mechanical stability, osseointegration, and wear resistance.

Comparison of femoral bone remodeling after total hip arthroplasty with cementless short-tapered wedge stem and fully hydroxyapatite-coated stem.

We aimed to compare periprosthetic femoral bone remodeling after cementless total hip arthroplasty (THA) using a short-tapered wedge stem and a fully hydroxyapatite (HA)-coated stem. In this retrospective study, 24 primary cementless THA procedures with short-tapered wedge stem and 24 using a fully HA-coated stem were performed. The follow-up duration was 2 years for both groups. Clinical evaluation was performed using the Merle d'Aubigné and Postel scoring systems. Standardized anteroposterior radiographs of the pelvis and femur were obtained. Dual-energy X-ray absorptiometry was performed, and the bone mineral density (BMD) around the stem was assessed in each Gruen zone at the first postoperative week as a baseline value and at 6 weeks, 3 and 6 months, and 1 and 2 years postoperatively. The mean Merle d'Aubigné and Postel scores improved significantly postoperatively in both groups. None of the hips showed loosening in either group. Spot welds occurred in zones 1, 2, 6, and 7 in the short-tapered wedge group, and in all zones in the fully HA-coated group. Significant BMD loss occurred only in zone 4 in the short-tapered wedge group, and no significant bone loss occurred in any zone in the fully HA-coated stem group; a significant difference between the two groups was observed only in zone 4 at 2 years after THA. Clinical and radiographical outcomes in both groups were good, and both stems suppressed postoperative BMD loss at 2 years.

The role of bone remodeling in measuring migration of custom implants for large acetabular defects.

In revision total hip arthroplasty, achieving robust fixation is difficult and implant movement may occur over time. Bone may also rearrange around the implant as a result of mechanical loading, making the measurement of migration challenging. The study aimed to quantify changes in bone shape and implant position 1 year following acetabular reconstruction using custom three-dimensional-printed cups. This observational retrospective cohort study involved 23 patients with Paprosky type IIIB defects. Postop computed tomography scans taken within 1 week of surgery and at 1-year postsurgery were co-registered and analyzed. Three co-registration strategies were implemented including bone-to-bone and implant-to-implant. (1) Co-registration of the ipsilateral innominate bone (diseased anatomy) was used to measure changes in implant position. (2) Co-registration of the implant was carried out to quantify changes in the ipsilateral innominate bone shape. (3) Co-registration of the contralateral innominate bone (nondiseased anatomy) was performed to measure changes in the ipsilateral innominate bone shape and implant position. The median centroid distances (interquartile range [IQR]) were 2.3 mm (IQR: 3.7-1.7 mm) for changes in implant position, 2.4 mm (IQR: 3.6-1.6 mm) for changes in ipsilateral innominate bone shape, and 3.7 mm (IQR: 4.6-3.5 mm) for changes in ipsilateral innominate bone shape and implant position. Following acetabular reconstruction, implant movements and periprosthetic bone remodeling are physiological and of a similar extent. Surgeons and engineers should consider this when performing implant monitoring in these patients.

Rectangular tapered short stem excellently preserves proximal bone mineral density preservation than tapered wedge short stem

Fitmore stem is a rectangular, tapered, short, cementless stem. A characteristic feature of this stem is that it provides rotational stability due to the high medullary occupancy achieved by its rectangular cross-section and thick antero- posterior width. We aimed to investigate the differences in periprosthetic bone remodelling between a rectangular- tapered short stem and a short tapered-wedge stem. Eighty patients who underwent primary total hip arthroplasty using a rectangular-tapered short stem (Fitmore) or a short tapered-wedge stem (Tri-Lock BPS) were enrolled in this study. Bone mineral densities (BMDs) in the seven Gruen zones were evaluated using dual-energy X-ray absorptiometry at baseline, and at 6 and 24 months postoperatively. Peri-prosthetic BMD and clinical factors were assessed and compared. In addition, correlations between periprosthetic BMD changes and stem anteversion error were analyzed using Pearson’s correlation coefficient in the two groups. A significantly better postoperative periprosthetic BMD change was found in zones 1 and 7 in the rectangular-tapered group. Additionally, no significant correlation was observed between stem anteversion error and periprosthetic BMD changes in the rectangular-tapered groups. However, in the tapered-wedge group, there were significant negative correlations between the stem anteversion error and BMD changes at 6 months and 24 months in zones 1 and 7. In the rectangular-tapered group, a significantly better postoperative periprosthetic BMD change was found particularly in the region proximal to the stem. Rectangular-tapered short stem can be more resistant to rotation due to higher medullary occupancy and may lead to better periprosthetic BMD than the tapered-wedge short stem, especially in the proximal region of the stem.

Comparison study of periprosthetic bone remodeling between simultaneous bilateral total hip arthroplasty and unilateral total hip arthroplasty: a matched cohort study.

The load-bearing pattern of periprosthetic bone may differ between patients who underwent simultaneous bilateral and unilateral total hip arthroplasty (THA). We investigated the differences in periprosthetic bone remodeling after simultaneous bilateral total hip arthroplasty and unilateral total hip arthroplasty. This retrospective cohort study enrolled 154 consecutive patients undergoing THA using full hydroxyapatite (HA) compaction short stems. Patient characteristics including age, body mass index, University of California Los Angeles (UCLA) activity score, and bone shape of the proximal femur were adjusted by propensity score matching. Subsequently, periprosthetic bone mineral density changes were compared between simultaneous bilateral and unilateral THA. We found that bone mineral density loss in the simultaneous bilateral THA group was significantly higher in zones 6 and 7 at 24 months after THA (zone 6, p = 0.019; zone 7, p = 0.041). Periprosthetic bone mineral density loss was not associated with clinical factors, including age, body mass index, and daily activity. Additionally, we demonstrated that periprosthetic bone mineral density loss was higher in zones 1, 4, 6, and 7 of patients with a normal hip on the contralateral side after unilateral THA (zone 1, p = 0.041; zone 4, p = 0.041; zone 6, p = 0.037; zone7, p = 0.019). The postoperative periprosthetic bone remodeling was lower in patients who underwent simultaneous bilateral THA than in those who underwent unilateral THA, even though patient characteristics were adjusted by propensity matching. Further observation of periprosthetic bone mineral density loss is needed to clarify the differences between the groups.

Bone Remodeling Around Solid and Porous Interbody Cages in the Lumbar Spine.

Spinal fusion is an effective surgical treatment for intervertebral disk degeneration. However, the consequences of implantation with interbody cages on load transfer and bone remodeling in the vertebral bodies have scarcely been investigated. Using detailed three-dimensional models of an intact and implanted lumbar spine and the strain energy density based bone remodeling algorithm, this study aimed to investigate the evolutionary changes in distribution of bone density (ρ) around porous and solid interbody cages. Follower load technique and submodeling approach were employed to simulate applied loading conditions on the lumbar spine models. The study determined the relationship between mechanical properties and parametrical characteristics of porous body-centered-cubic (BCC) models, which corroborated well with Gibson-Ashby and exponential regression models. Variations in porosity affected the peri-prosthetic stress distributions and bone remodeling around the cages. In comparison to the solid cage, stresses and strains in the cancellous bone decreased with an increase in cage porosity; whereas the range of motion increased. For the solid cage, increase in bone density of 20-28% was predicted in the L4 inferior and L5 superior regions; whereas the model with 78% porosity exhibited a small 3-5% change in bone density. An overall increase of 9-14% bone density was predicted in the L4 and L5 vertebrae after remodeling for solid interbody cages, which may influence disk degeneration in the adjacent segment. In comparison to the solid cage, an interbody cage with 65-78% porosity could be a viable and promising alternative, provided sufficient mechanical strength is offered.

Multi-objective design optimization of 3D micro-architected implants

Recent advances in 3D printable micro-architected materials offer unprecedented possibilities for the development of highly tailored orthopaedic implants. These devices, which are typically made from fully solid materials, significantly alter load transmission to the surrounding bone tissue, potentially leading to interface instability and bone resorption. In this work, we present computational methods to synthesize three dimensional (3D), patient-specific, implants with heterogeneous micro-architecture. Our method simultaneously minimizes the risks of load-induced interface fracture and peri-prosthetic bone remodelling, while taking into account functional and manufacturing constraints.We first develop a novel parametric micro-architecture with desirable functional attributes and a wide range of effective mechanical properties, including both positive and negative Poisson’s ratios. We then present formulations which optimize the spatial configuration of micro-architecture parameters in order to simultaneously minimize the risk of load-induced interface fracture and post-operative bone remodelling. To that end, a novel bone remodelling objective is devised, taking into account both bone apposition and resorption, predicted via a model based on strain–energy density. The interface fracture objective is defined as the maximum value of the multi-axial Hoffman failure criterion along the interface.The procedure is applied to the design of 3D titanium hip implants with prescribed conventional geometries and compared, in silico, to both a conventional solid implant and a homogeneous low-stiffness lattice design. The optimized implant results in a performance improvement of 64.0% in terms of bone remodelling, and 13.2% in terms of interface fracture risk, compared to a conventional solid implant design.

Peri-prosthetic bone remodeling of hydroxyapatite-coated compaction short stem was not affected by stem alignment

BackgroundTo improve implant survival through accelerated early bone remodeling during total hip arthroplasty (THA), hydroxyapatite (HA) is widely used as a bioactive coating, which is believed to enhance initial fixation by osseointegration. We aimed to investigate the relationship between stem insertion alignment and postoperative bone mineral density (BMD) changes in patients with full hydroxyapatite-coated (HA) compaction short stem and short tapered-wedge stem.MethodsThis retrospective cohort study enrolled 115 consecutive patients (115 joints) undergoing THA using the full HA compaction short (n = 59) and short tapered-wedge (n = 56) stems. Stem alignment, including anteversion, valgus, and anterior tilt were measured by a three-dimensional template using computed tomography data. Post-operative peri-prosthetic BMD was measured by dual-energy X-ray absorptiometry. The relationship between stem alignment and BMD changes in the stems was analyzed.ResultsPatterns of peri-prosthetic BMD changes were similar in both groups. Stem insertion alignments of anteversion, valgus, and anterior tilt were different between the two stem types. Stem alignment of valgus and anterior tilt did not affect peri-prosthetic BMD in either of the stem type. An absolute anteversion difference between stem anteversion and original canal anteversion caused significant peri-prosthetic BMD loss in Gruen zones one and seven in the tapered-wedge stem. However, stem alignment of absolute anteversion difference did not affect BMD changes in the HA compaction stem.ConclusionsPeri-prosthetic bone remodeling remained unaffected by stem alignment after THA with the new short full HA compaction stem.

Effects of porous tantalum on periprosthetic bone remodeling around metaphyseal filling femoral stem: a multicenter, prospective, randomized controlled study

Periprosthetic bone loss due to adaptive bone remodeling is an important unresolved issue in cementless total hip arthroplasty (THA). The use of porous tantalum on the proximal surface of the femoral stem is expected to decrease postoperative bone loss around the prosthesis through early fixation. We conducted a multicenter randomized controlled study to determine if porous tantalum could reduce periprosthetic bone loss after THA. From October 2012 to September 2014, 118 patients (mean age, 61.5 years; 107 females and 11 males) were prospectively enrolled and were randomly allocated at a ratio of 1:1 to either a metaphyseal filling stem with a proximal porous tantalum coating (Trabecular Metal) or a conventional metaphyseal filling stem with fiber mesh coating (VerSys). Patients underwent dual-energy x-ray absorptiometry scans within 1 week after surgery (baseline) and at 6, 12, and 24 months after surgery to assess periprosthetic bone mineral density (BMD) in the 7 Gruen zones. In addition, the Japanese Orthopaedic Association hip score was assessed before surgery and at 6, 12, and 24 months after surgery. In the proximal periprosthetic region (zones 1 and 7), the Trabecular Metal group had significantly smaller reductions in BMD than the VerSys group throughout the study period. In the VerSys group, significant reductions in BMD compared to baseline were seen at each measurement point in all regions, except in zone 6 at 24 months. In the Trabecular Metal group, no significant reductions in BMD relative to baseline were seen in zones 1, 5, or 6 throughout the study period. Both groups demonstrated similar improvement in Japanese Orthopaedic Association hip scores over the study period. This study demonstrated that a proximally coated stem with porous tantalum has superior results over a conventional stem with titanium fiber mesh in terms of periprosthetic bone remodeling.

Does a Monoblock Acetabular Component With a Ceramic Liner Cause More Pelvic Bone Loss Than a Conventional Modular Cementless Acetabular Component? A 2-Year Randomized Clinical Trial.

Ceramic-on-ceramic bearings permit the use of large femoral head size while maintaining a favorable effect on wear rates. However, because of increased device rigidity, periprosthetic bone quality could be negatively affected due to stress shielding. The purpose of this study is to assess pelvic periprosthetic bone remodeling around a monoblock ceramic-on-ceramic acetabular component compared to that around a conventional modular metal-on-polyethylene device. Participants were randomized to receive hip replacement using either a porous-coated, modular metal-on-polyethylene acetabular component (n= 46) or a hydroxyapatite and titanium-coated monoblock shell with an integrated ceramic-on-ceramic bearing (n= 40). Radiographic assessments were completed preoperatively and postoperatively, and measurements of bone mineral density (BMD) using dual-energy X-ray absorptiometry with region free analysis were performed postoperatively and over 2-years of follow-up. There was no significant difference in BMD between the 2 groups at baseline or over the following 2 years. At follow-up, complete shell-to-bone contact without a radiolucent line was observed in 26 (67%) of the modular devices and in 37 (93%) of monoblock (P < .001). The modular device was an independent predictor of radiolucent lines (odds ratio 19.1, P= .007). No cases underwent revision surgery for acetabular loosening. Both the porous-coated modular and hydroxyapatite-coated monoblock acetabular components showed successful clinical results at short-term follow-up with no difference in pixel-level BMD. Using a large head monoblock device does not appear to be associated with an adverse effect on the local bone environment when compared to a modular device. NCT: NCT01558752.

Hydroxyapatite-coated compaction short stem represents a characteristic pattern of peri-prosthetic bone remodelling after total hip arthroplasty.

We aimed to investigate the differences in peri-prosthetic bone remodelling between the full hydroxyapatite (HA)-collared compaction short stem and the short tapered-wedge stem. This retrospective cohort study enrolled 159 consecutive patients (159 joints) undergoing total hip arthroplasty (THA) using the full HA compaction short (n = 64) and short tapered-wedge (n = 95) stems. Body mass index (BMI), peri-prosthetic bone mineral density (BMD), and clinical factors, including the Japanese Orthopaedic Association score and the University of California Los Angeles (UCLA) activity score were assessed and compared. Stem related complications were seen in three cases. Both groups showed similar peri-prosthetic BMD changes. Peri-prosthetic BMD was almost maintained in the distal femur and Gruen zone 6 with both type of stems, but significant BMD loss was found in zones 1 and 7 in both groups and in zone 2 of the full HA compaction stem group. No significant correlations were found between the proximal femoral BMD changes and the age, BMI, and UCLA score in both the full HA compaction and tapered-wedge stem groups. Femoral bone shape affected the peri-prosthetic BMD changes in the tapered-wedge stem group but not in the full HA compaction group. The stem collar of the full HA compaction stem did not affect peri-prosthetic BMD, but unique bone remodelling in the calcar region was observed in 27.6% cases. A significant difference in the peri-prosthetic BMD changes at Gruen zone 2 was found in patients with or without thigh pain. Peri-prosthetic bone remodelling remained unaffected by clinical and radiographic factors after THA with the new short full HA compaction stem. Therefore, this new stem may be useful in a variety of cases.

No difference for changes in BMD between two different cementless hip stem designs 2\xa0years after THA

This study evaluates how 2 different total hip arthroplasty (THA) stems compares regarding adaptive bone remodelling. The stems are both proximally porous coated, aiming for proximal fixation, but with different dispersal of the coating. They are also differently designed regarding the distal tip of the stem. We aimed to investigate if there is a difference in periprosthetic adaptive bone remodelling between two different designs. From February 2016 to September 2017, we randomised 62 patients, 1:1 (mean age = 64 years, Female/Male = 28/34), scheduled for an uncemented THA to receive either an EBM or a BM THA stem. We performed dual-energy x-ray absorptiometry (DEXA) scans within a week after surgery and at 3, 6, 12 and 24 months with measurements of bone mineral density (BMD) in the 7 Gruen zones (region of interest (ROI) 1–7). Additionally, Oxford Hip Score and Harris Hip Score were collected at 6, 12 and 24 months. We found a decrease in BMD between the postoperative and the 24-months values in all ROIs for both stems. The greatest decrease over time was seen for both groups in the ROI1 (BM = − 8.4%, p = 0.044, and EBM = − 6.5%, p = 0.001) and ROI7 (BM = − 7%, p = 0.005, and EBM = − 8.6%, p < 0.0005). We found a tendency in ROI2–4 of a higher degree of bone loss in the EBM group. However, this difference only continued beyond 6 months in ROI4 (24 months: BM = − 1.2% and EBM = − 2.8%, p = 0.001). The stems show similar adaptive bone remodelling and are clinically performing well.

Différences inter-genre à moyen terme du remodelage osseux péri-prothétique fémoral après implantation d’un pivot court de prothèse de hanche de morphologie courbe avec préservation osseuse

BackgroundThe implant-specific periprosthetic bone remodelling in the proximal femur is considered to be an important factor influencing the long-term survival of cementless hip stems. Particularly data of gender-specific differences regarding bone-preserving stems are very rare in literature and mainly limited to short-term investigations. Therefore, we investigated at mid-term one arm of a prospective randomized study to evaluate if there is an influence of gender on implant-specific stress shielding after implantation of a curved bone preserving hip stem (Fitmore) 5 years postoperatively? HypothesisWe hypothesised there will be no gender-specific differences in periprosthetic bone remodelling. Patients and MethodsA total of 20 female and 37 male patients underwent total hip arthroplasty using the Fitmore stem. Clinical, radiological as well as osteodensitometric examinations were performed preoperatively, 7 days and 3, 12 and 60 months postoperatively. Clinical data collection included the Western Ontario and McMaster Universities Arthritis Index (WOMAC) and the Harris Hip Score (HHS). Periprosthetic bone mineral density (BMD) was measured using Dual Energy X-ray Absorptiometry (DXA) and the periprosthetic bone was divided into 7 regions of interest (ROI) for analysis. The results at 3, 12 and 60 months were compared with the first postoperative measurement after 7 days to obtain a percentage change. ResultsPeriprosthetic BMD showed a decrease in all 7 ROIs for both groups 5 years postoperatively referred to the baseline value, except ROI 3 (0.8%, p=0.761), representing the distal lateral part of the stem, and ROI 5 (0.3%, p=0.688), representing the distal medial part of the stem, in the male cohort. Significant gender differences were found in ROI 1 (−16.0% vs. −3.5%, p=0.016) and ROI 6 (−9.9% vs. −2.1%, p=0.04) in favour of the male patients. Clinical results showed no significant gender differences 5 years postoperatively with regard to WOMAC (mean 0.4 (±0.8, 0–3.3) in women vs. 0.3 (±0.8, 0–4.2) in men, p=0.76) and HHS (mean 93.0 (±9.7, 66.0–100.0) in women vs. 93.9 (±11.5, 53.0–100.0) in men, p=0.36). ConclusionProximal stress shielding was observed independent of gender 5 years postoperatively. However, there was a significantly lower bone loss proximal lateral and medial below the calcar in male patients, indicating a more physiological load transfer. [ClinicalTrials.gov Identifier: NCT03147131 (Study ID D.3067-244/10). Registered 10 May 2017 - Retrospectively registered, https://clinicaltrials.gov/ct2/show/NCT03147131?term=Bieger&draw=2&rank=1]. Level of evidenceIV; prospective study without control group.

Mid-term gender-specific differences in periprosthetic bone remodelling after implantation of a curved bone-preserving hip stem

BackgroundThe implant-specific periprosthetic bone remodelling in the proximal femur is considered to be an important factor influencing the long-term survival of cementless hip stems. Particularly data of gender-specific differences regarding bone-preserving stems are very rare in literature and mainly limited to short-term investigations. Therefore, we investigated at mid-term one arm of a prospective randomised study to evaluate if there is an influence of gender on implant-specific stress shielding after implantation of a curved bone preserving hip stem (Fitmore) 5 years postoperatively. HypothesisWe hypothesised there will be no gender-specific differences in periprosthetic bone remodelling. Patients and methodsA total of 20 female and 37 male patients underwent total hip arthroplasty using the Fitmore stem. Clinical, radiological as well as osteodensitometric examinations were performed preoperatively, 7 days and 3, 12 and 60 months postoperatively. Clinical data collection included the Western Ontario and McMaster Universities Arthritis Index (WOMAC) and the Harris Hip Score (HHS). Periprosthetic bone mineral density (BMD) was measured using Dual Energy X-ray Absorptiometry (DXA) and the periprosthetic bone was divided into 7 regions of interest (ROI) for analysis. The results at 3, 12 and 60 months were compared with the first postoperative measurement after 7 days to obtain a percentage change. ResultsPeriprosthetic BMD showed a decrease in all 7 ROIs for both groups 5 years postoperatively referred to the baseline value, except ROI 3 (0.8%, p=0.761), representing the distal lateral part of the stem, and ROI 5 (0.3%, p=0.688), representing the distal medial part of the stem in the male cohort. Significant gender differences were found in ROI 1 (−16.0% vs. −3.5%, p=0.016) and ROI 6 (−9.9% vs. −2.1%, p=0.04) in favour of the male patients. Clinical results showed no significant gender differences 5 years postoperatively with regard to WOMAC (mean 0.4 (±0.8, 0–3.3) in women vs. 0.3 (±0.8, 0–4.2) in men, p=0.76) and HHS (mean 93.0 (±9.7, 66.0–100.0) in women vs. 93.9 (±11.5, 53.0–100.0) in men, p=0.36). ConclusionProximal stress shielding was observed independent of gender 5 years postoperatively. However, there was a significantly lower bone loss proximal lateral and medial below the calcar in male patients, indicating a more physiological load transfer. [ClinicalTrials.gov identifier: NCT03147131 (Study ID D.3067-244/10). Registered 10 May 2017 – retrospectively registered, https://clinicaltrials.gov/ct2/show/NCT03147131?term=Bieger&draw=2&rank=1] Level of evidenceIV; prospective study without control group.

Bone Remodeling of Two Anatomic Stems: Densitometric Study of the Redesign of the ABG-II Stem.

BackgroundPeriprosthetic bone remodeling, which is a phenomenon observed in all femoral stems, has a multifactorial origin as it depends on factors related to the patient, the surgical technique, and the design of the implant. To determine the pattern of remodeling produced by 2 models of anatomic cementless implants, we quantified the changes in bone mineral density (BMD) in the 7 areas of Gruen observed at different moments after surgery during the first postoperative year.MethodsA prospective, comparative, controlled, 1-year follow-up densitometric study was carried out in 2 groups of patients suffering from primary unilateral hip osteoarthritis. In the first group, with 68 patients, an ABG-II stem was implanted. In the second, with 66 patients, the ANATO stem was used. The contralateral, healthy hip was taken as a control.ResultsBoth groups showed a decrease in BMD at 3 months in all the areas, which recovered at the end of the study, except in zone 7: there was a 17.7% decrease in the ABG-II group and a 5.9% decrease in the ANATO group. In zones 2 and 6, where more loads are transmitted, conservation of BMD is observed in response to Wolff's law. The differences in the pattern of remodeling between groups were maintained despite the age, gender, and BMI of the patients or the size of the implants.ConclusionThe ANATO stem achieved a more efficient transmission of loads at the metaphyseal level, which promotes bone preservation at the proximal femur, than the ABG-II stem.

Comparison of Bone Remodeling Between Collum Femoris-Preserving Stems and Ribbed Stems in 1-Stage Bilateral Total Hip Arthroplasty.

BackgroundThis study examined a cohort of patients who underwent bilateral THAs. CFP prostheses and ribbed prostheses were each used on both sides. We assessed the midterm clinical, radiological, and bone remodeling outcomes around prosthesis of these patients.Material/MethodsFrom January 2009 to January 2013, 53 patients were enrolled in our study. We clinically evaluated all patients by recording Harris hip and Oxford hip scores. Some radiological indicators of the femoral prosthesis position were measured. Periprosthetic bone remodeling was assessed via bone mineral density (BMD) measurements.ResultsThe mean preoperative HHS of the CFP group and ribbed group were no significantly different (P=0.570). The neck-shaft angle in the ribbed group was significantly greater than in the CFP group (P<0.001). The CFP group had a greater offset (P<0.001). There was no significant difference in leg-length discrepancy (P=0.727) or Engh score between the 2 groups at the last follow-up (P=0.858). The preoperative BMD was increased at the last follow-up in Gruen zones 3 and 5 (P<0.05) and decreased in Gruen zones 1 and 7 (P<0.05) on the CFP side. BMD was increased in Gruen zone 4 (P=0.007) on the ribbed side. Pearson correlations and rate of complications were not significantly different.ConclusionsBoth the CFP and ribbed stem significantly improved the preoperative HHSs and OHSs. The bone remodeling of the CFP stem was more concentrated in the middle and distal regions of the prosthesis, while that of the ribbed stem was more concentrated in the proximal portion of the prosthesis.

Experimental Validation of an ITAP Numerical Model and the Effect of Implant Stem Stiffness on Bone Strain Energy

The Intraosseous Transcutaneous Amputation Prosthesis (ITAP) offers transfemoral amputees an ambulatory method potentially reducing soft tissue complications seen with socket and stump devices. This study validated a finite element (in silico) model based on an ITAP design and investigated implant stem stiffness influence on periprosthetic femoral bone strain. Results showed good agreement in the validation of the in silico model against the in vitro results using uniaxial strain gauges and Digital Image Correlation (DIC). Using Strain Energy Density (SED) thresholds as the stimulus for adaptive bone remodelling, the validated model illustrated that: (a) bone apposition increased and resorption decreased with increasing implant stem flexibility in early stance; (b) bone apposition decreased (mean change = − 9.8%) and resorption increased (mean change = 20.3%) from distal to proximal in most stem stiffness models in early stance. By engineering the flow of force through the implant/bone (e.g. by changing material properties) these results demonstrate how periprosthetic bone remodelling, thus aseptic loosening, can be managed. This paper finds that future implant designs should be optimised for bone strain under a variety of relevant loading conditions using finite element models to maximise the chances of clinical success.

Radiographic Evaluation of Bone Remodeling Around Osseointegration Implants Among Transfemoral Amputees.

To examine periprosthetic bone remodeling among the recipients of 2 types of lower-limb osseointegrated systems, the Integral Leg Prosthesis (ILP) and the Osseointegration Prosthetic Limb (OPL) type A, over a >24-month period. Retrospective cohort study. Private hospital, with a specialized osseointegration unit. Twenty-eight patients with transfemoral lower-limb amputations were fitted with osseointegrated systems. Of these patients, 15 received the ILP and 13 the OPL osseointegrated implant. Radiographic measurements were taken at baseline (0.4 ± 0.5 years) and at follow-up (3.0 ± 0.8 years) after the osseointegration procedure. Radiographic bone density, longitudinal bone coverage, and bone width outcomes were measured in inverse "Gruen zones." Bone remodeling was evaluated by comparing changes between baseline and follow-up measurements. Radiographic bone density decreased in all zones among both ILP and OPL groups. Cortical bone thickness increased among the OPL group in zones 3 (P < 0.05) and 5 (P < 0.05). Distal bone coverage of the ILP implant decreased by 2.3% (P < 0.01) and 4.1% (P < 0.05) of the total implant length on the medial and lateral sides, respectively. Decreased bone density with increased periprosthetic cortical thickness suggests a change in the bone architecture for the OPL group. The findings of this study raise concerns for the long-term success of the ILP implant. Radiographic analysis of x-rays seems to be a useful tool for clinicians to evaluate bone remodeling around osseointegrated prosthesis. Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Does radiopaque cement conceal periprosthetic bone loss around femoral stems?

Periprosthetic bone remodelling may increase fracture risk and deplete bone stock around hip implants. These changes are in part caused by implant design, advocating an early evaluation of bone remodelling properties of new implants. This can be done by repeated dual-energy x-ray absorptiometry (DXA) measurements. We know that radiopaque cement falsely elevates bone mineral density (BMD) in single measurements, however, its impact on repeated measurements, i.e. BMD changes is unexplored. We have therefore investigated whether the presence of radiopaque cement affect repeated BMD measurements. 33 patients eligible for total hip replacement were randomly assigned to either radiopaque or radiolucent cement. BMD changes up to 12 months were measured by DXA, in addition to Harris Hip Score, plain radiographs and radiostereometric analysis (RSA). Periprosthetic BMD declined during the first 3-6 months in all zones in both groups. The greatest reduction (14%) was seen in the proximal Gruen zones (1 and 7). We found a significant difference in Gruen zones 1 and 2, where the measured bone loss was higher in the radiolucent cement group. The presence of radiopaque agents in bone cement may influence DXA measurements of bone remodelling.ClinicalTrials.gov identifier NCT00473421.

Peri-prosthetic bone remodeling and change in bone mineral density in the femur after cemented polished tapered stem implantation.

We examined longitudinal changes in bone mineral density (BMD) around the femur for 5years after total hip arthroplasty (THA) using cemented collarless polished double-tapered stem implantation and investigated the influence of BMD changes on radiological remodeling of the femur. Sixty hips from 56 patients who underwent cemented THA with a collarless polished double-tapered stem were included. BMD was measured 2weeks postoperatively (baseline), 3months, 6months, 1year and annually thereafter until 5years after surgery using dual-energy X-ray absorptiometry on the lumbar spine and proximal femur of the operated side according to the Gruen's zone classification. We analyzed predictable factors for BMD preservation in the proximal femur and compared radiological remodeling of the femur and changes in BMD. BMD at 5years in zone 7 decreased less than 10%, whereas BMD in zone 1 increased to over the baseline (+ 1.9%). Multiple linear regression analyses revealed that body weight was a predictor for positive BMD change in the proximal femur. The frequency of radiolucency of the femur was significantly lower in patients who exhibited an increase in BMD at 5years compared with BMD at 2weeks in zone 7. BMD preservation of the proximal femur after cemented collarless polished double-tapered stem implantation was more effective in heavier patients. Furthermore, the frequency of radiolucency around the stem was significantly lower in patients who exceeded 100% of the baseline BMD in zone 7 at 5years.