Electroluminescence Performance Research Articles

Efficient Charge Injection for Perovskite Light‐Emitting Transistor

AbstractMetal halide perovskite semiconductors have demonstrated remarkable performance in light‐emitting‐diode applications in recent years. However, their potential application in other emerging optoelectronic devices, such as light‐emitting field‐effect transistors (LEFETs) is impeded by poor luminous efficiency due to inefficient charge injection. Here, an n‐type MgZnInO (MIZO) as the channel layer is synthesized to achieve efficient electron injection in perovskite LEFETs. These findings indicate that the incorporation of Mg not only suppresses the generation of oxygen vacancies but also optimizes the energy level alignment. These synergistic effects reduce non‐radiative recombination and improve interfacial charge transport. Consequently, the MIZO‐based perovskite LEFETs exhibit an improvement in threshold voltage, subthreshold swing, and field‐effect mobility. The electroluminescence performance shows a peak external quantum efficiency (EQE) of 1.97% with a maximum brightness of 2.1 × 104 cd m−2, accompanied by low‐efficiency roll‐off (an EQE of 1.88% at the current density of 810 mA cm−2). To the best of the author's knowledge, this represents the best luminous efficiency reported for perovskite LEFETs to date.

Theoretical insights into long-range coupling of electron-hole pairs in TCTA–PO-T2T exciplex

This work reports theoretical investigations concerning long-range coupling of electron-hole pairs in spatially separated exciplex (SSE) systems via Density Functional Theory and Time-Dependent Density Functional Theory. Based on TCTA−PO-T2T parent exciplex, where 4,4′,4″-Tris(carbazol-9-yl)triphenylamine (TCTA) serves as donor (D) and 2,4,6-Tris[3-(diphenylphosphinyl)phenyl]-1,3,5-triazine (PO-T2T) as acceptor (A), SSEs are constructed by intentionally tuning the D−A distance. The calculation results demonstrate that all SSEs, even if the D−A distance is over 14 Å, exhibit the clear and strong charge transfer character in terms of DCT, qCT, and t indexes. As the D−A distance increases, the energy gap of SSEs is increased, resulting in the blueshift of emission spectra. Calculation and experiment results show a good consistency, indicating that our model could well describe SSEs. Meanwhile, the reduced energy gap between CT and 3LE and more degenerate states could boost reverse intersystem crossing via vibronic coupling and hyperfine coupling, eventually improving the electroluminescent performance of SSEs. Our study suggests that manipulation of relative energy alignment via controlling D−A distance not only promotes the properties of exciplexes, but also offers guidance for designing thermally activated delayed fluorescence emitters through-space charge transfer.

Progress in Research on White Organic Light-Emitting Diodes Based on Ultrathin Emitting Layers.

White organic light-emitting diodes (WOLEDs) hold vast prospects in the fields of next-generation displays and solid-state lighting. Ultrathin emitting layers (UEMLs) have become a research hotspot because of their unique advantage. On the basis of simplifying the device structure and preparation process, they can achieve electroluminescent performance comparable to that of doped devices. In this review, we first discuss the working principles and advantages of WOLEDs based on UEML architecture, which can achieve low cost and more flexibility by simplifying the device structure and preparation process. Subsequently, the successful applications of doping and non-doping technologies in fluorescent, phosphorescent, and hybrid WOLEDs combined with UEMLs are discussed, and the operation mechanisms of these WOLEDs are emphasized briefly. We firmly believe that this article will bring new hope for the development of UEML-based WOLEDs in the future.

Suppressing the Thermal Quenching Effect via a Cluster Conformer in Copper(I)-Iodide Coordination Polymeric Phosphors for High-Power White LED Lighting.

High-power LED lighting is a crucial challenge due to the notorious thermal quenching (TQ) effect of traditional phosphors at high operating currents, which would result in poor device performance and hamper practical optoelectronic application. Herein, we demonstrate ligand engineering of a cubane- versus staircase-like [Cu4I4] conformer as a node in coordination polymers, which remarkably suppresses the TQ effect of cluster-based photoluminescence. For complex 1 (the formula [Cu4I4(bbimb)2]n) with the cubane-like [Cu4I4] conformer as a node, the metallophilicity interaction enables ultrabright triplet emission with a photoluminescence quantum yield over 82%, and the phonon-assisted detrapping process of excitons effectively suppresses the TQ effect in the wide temperature range. In contrast, the staircase-like [Cu4I4] conformer as a node in complex 2 (the formula [Cu4I4(bbtmb)2]n) exhibits a serious TQ effect over the investigated temperature. Phosphor-converted white LEDs (pc-wLEDs) were fabricated by integrating the cluster-based coordination polymers as a color converter, and their electroluminescence performances were investigated under high bias currents. The prototype pc-wLED device by incorporating the phosphor with the suppressed TQ effect exhibits a continuous rise in brightness under a high bias current of 300 mA. The results demonstrate that ligand engineering of the cluster conformer via suppressing the TQ effect proves efficient in designing an ideal color converter for high-power pc-wLED lighting.

Energy Transfer-Dominated Quasi-2D Blue Perovskite Light-Emitting Diodes.

The bromide-chloride mixed quasi-two-dimensional (2D) perovskite, with a natural quantum well structure and tunable exciton binding energy, has gained significant attention for high-performance blue perovskite light-emitting diodes (PeLEDs). However, the relative importance of having a low trap state density or efficient exciton transfer for high-efficiency electroluminescence (EL) performance remains elusive. Here, two molecules with the benzoic acid group, sodium 4-fluorobenzoate (SFB) and 3,5-dibromobenzoic acid (DBA), are used to modulate the phase distribution and trap state to explore the effect between energy transfer and defect passivation. As a result, when the n = 1 phase is inhibited in both films, the DBA@SFB-modified perovskite films achieve a higher photoluminescence quantum yield (PLQY) than the SFB-modified perovskite films due to effective defect passivation. However, DBA@SFB-modified PeLEDs exhibit lower external quantum efficiency (EQE) compared to SFB-modified PeLEDs due to the poor exciton transfer between the low-dimensional phase. This demonstrates that passivation strategies may enhance photoluminescence through reducing nonradiative recombination, but the effect of phase distribution is pivotal for EL performance by efficient energy transfer in quasi-2D perovskites. Femtosecond time-resolved transient absorption measurements confirm the fastest carrier dynamics in SFB-modified perovskite films, further corroborating the above result. This work provides useful information about phase modulation and defect passivation for high-efficiency blue quasi-2D PeLEDs.

Improving the Electroluminescence Properties of New Chrysene Derivatives with High Color Purity for Deep-Blue OLEDs.

Two blue-emitting materials, 4-(12-([1,1':3',1″-terphenyl]-5'-yl)chrysen-6-yl)-N,N-diphenylaniline (TPA-C-TP) and 6-([1,1':3',1″-terphenyl]-5'-yl)-12-(4-(1,2,2-triphenylvinyl)phenyl)chrysene (TPE-C-TP), were prepared with the composition of a chrysene core moiety and terphenyl (TP), triphenyl amine (TPA), and tetraphenylethylene (TPE) moieties as side groups. The maximum photoluminescence (PL) emission wavelengths of TPA-C-TP and TPE-C-TP were 435 and 369 nm in the solution state and 444 and 471 nm in the film state. TPA-C-TP effectively prevented intermolecular packing through the introduction of TPA, a bulky aromatic amine group, and it showed an excellent photoluminescence quantum yield (PLQY) of 86% in the film state. TPE-C-TP exhibited aggregation-induced emission; the PLQY increased dramatically from 0.1% to 78% from the solution state to the film state. The two synthesized materials had excellent thermal stability, with a high decomposition temperature exceeding 460 °C. The two compounds were used as emitting layers in a non-doped device. The TPA-C-TP device achieved excellent electroluminescence (EL) performance, with Commission Internationale de L'Eclairage co-ordinates of (0.15, 0.07) and an external quantum efficiency of 4.13%, corresponding to an EL peak wavelength of 439 nm.

Novel green/red oxyfluoride phosphors with excellent optical properties for near-UV excited white light emitting diode

Novel eye-sensitive Ba3Nb2O2F12(H2O)2:Tb3+ green and Ba3Nb2O2F12(H2O)2:Mn4+ red oxyfluoride phosphors with extremely strong absorption in the UV region were designed and synthesized by simple co-precipitation strategy. Particularly, Tb3+ ions were doped in this matrix for the first time, which greatly improves their absorption efficiency in the near ultraviolet region (367 nm) and emits sharp green light (544 nm). In addition, the Ba3Nb2O2F12(H2O)2:Mn4+ red phosphors have strong zero phonon line (ZPL) emission at 625 nm, which is conducive to improving the sensitivity of human eye and color purity. Meanwhile, the optical properties of the red phosphor are significantly enhanced via doping K+ cations as charge compensators. Crystal field environment and nephelauxetic effect of the as-prepared phosphors before and after K+ cation doping were systematically analyzed. Moreover, these synthesized red/green phosphors have good thermal stability and moisture resistance. Remarkably, the as-prepared Ba3Nb2O2F12(H2O)2:5%Mn4+ or K0.9Ba2.1Nb2O2F12(H2O)2:5%Mn4+ red phosphors can be directly mixed with the as-synthesized Ba3Nb2O2F12(H2O)2:13%Tb3+ green phosphor coating on 365 nm near-ultraviolet LED chip to package WLED devices with excellent electroluminescence performance. These findings are conducive to opening an avenue for screening the unique structure of optical materials.

High-temperature performance of InGaN-based amber micro-light-emitting diodes using an epitaxial tunnel junction contact

This study investigated the temperature-dependent electroluminescent (EL) performance of InGaN-based amber micro-light-emitting diodes (μLEDs) with a diameter of 40 μm using an epitaxial tunnel junction (TJ) contact for current spreading. The TJ-μLEDs could achieve a high electrical efficiency of 0.935 and a remarkable wall-plug efficiency of 4.3% at 1 A/cm2 at room temperature, indicating an excellent current injection efficiency of the TJ layers regrown by molecular beam epitaxy. Moreover, the current injection of the amber TJ-μLEDs at the forward bias could be further improved at elevated temperatures. The improvement can be explained by the enhanced tunneling probability and acceptor ionization in p-GaN based on the theoretical simulation. The redshift coefficient, which describes the temperature-dependent peak wavelength shift, is obtained as small as 0.05 nm/K, and the high-temperature-to-room-temperature EL intensity ratio is calculated as >0.56 even at a low current density of 0.5 A/cm2 at the temperatures up to 80 °C. This thermal droop behavior was attributed to the enhanced non-radiative recombination, which was confirmed by the shorter carrier lifetime measured at high temperatures.

Color Tunable Single-phase Cyclosilicate KBaScSi3O9: Eu2+/Tb3+/Sm3+ for n-UV pumped wLEDs

The exploration of stable/efficient phosphor for n-UV chip pumped white light-emitting diodes (wLEDs) remains an arduous task. Herein, a novel series of color tunable Eu2+/Tb3+/Sm3+ tridoped Sc-based cyclosilicate phosphors (KBaScSi3O9: Eu2+/Tb3+/Sm3+) have successfully designed and obtained via facile solid-state reaction based on comprehensive consideration of rigidly structural network of host, weak electron-phonon coupling strength and spectral adjustability of codopants via energy transfer (ET). The crystallographic occupancies of Eu, Tb and Sm primary in Ba/K, Ba and Ba sites in the monoclinic host, respectively were determined on the basis of the Rietveld refinements and crystal chemistry rules. The photoluminescence (PL) properties were systematically investigated in conjunction with structural analyses, implying that the ‘warm’ white light with excellent thermal stability is stemmed from combination of optimized blue (Eu2+), green (Tb3+) and red (Sm3+) emissions via Eu → Tb → Sm ET strategy. Interestingly, Tb ions play both roles of green light luminescent center and ET bridge to achieve cascade ET for connecting Eu/Sm ion pairs because of the adverse metal-metal charge transfer (MMCT) effect (Eu2+ + Sm3+ → Eu3+ + Sm2+). Furthermore, the phosphor-converted wLEDs (pc-wLEDs), by encapsulating the optimal KBS: 4%Eu/4%Tb/6%Sm with commercial n-UV LED chip, show high thermal stability with satisfactory electroluminescence (EL) performances. These results indicate the KBS: Eu/Tb/Sm phosphors are potential candidates for application in high power n-UV pumped pc-wLEDs.

Electroluminescence Performance Optimization of Films Based on the Change of Macroscopic Structure and Microscopic Calculation

Electroluminescence Performance Optimization of Films Based on the Change of Macroscopic Structure and Microscopic Calculation

Constructing multifunctional deep-blue emitters with weak charge transfer excited state for high-performance non-doped blue OLEDs and single-emissive-layer hybrid white OLEDs

Deep-blue emitter with high photoluminescence efficiency (PLQY) is highly desirable in ultra-high definition displays and white solid-state lightings. In this work, two deep-blue phenanthro[9,10]imidazole derivatives, PPIS and PPPIS, with hot exciton property are successfully developed. Compared to PPIS, the embedded phenyl bridge in PPPIS is able to effectively increase the overlap of frontier molecular orbitals. In consequence, PPPIS shows higher oscillator strength and significantly enhanced PLQY. PPPIS also achieves better electroluminescence performance in non-doped device, showing deep-blue emission with Commission International de l'Eclairage (CIE) coordinates of (0.153, 0.087) and the maximum external quantum efficiency (EQEmax) of 8.5% with minuscule efficiency roll-off. Meanwhile, when PPPIS serves as the host for phosphor PO-01, high-efficiency orange phosphorescent device is obtained with high EQEmax of 29.8% and negligible efficiency roll-off at 1000 cd/m2. Further, efficient single-emissive-layer white device is assembled via utilizing PPPIS as a blue emitter as well as the host for PO-01 simultaneously, providing warm-white emission with CIE coordinates of (0.429, 0.433) at 1000 cd/m2, the forward-viewing EQEmax of 27.2% and maximum power efficiency (PEmax) of 80.1 lm/W, respectively. Our studies can establish a viable design strategy for deep-blue emitters in high-performance non-doped blue OLEDs and hybrid WOLEDs.

Acceptor Copolymerized Axially Chiral Conjugated Polymers with TADF Properties for Efficient Circularly Polarized Electroluminescence.

Chiral conjugated polymer has promoted the development of the efficient circularly polarized electroluminescence (CPEL) device, nevertheless, it remains a challenge to develop chiral polymers with high electroluminescence performance. Herein, by the acceptor copolymerization of axially chiral biphenyl emitting skeleton and benzophenone, a pair of axially chiral conjugated polymers namely R-PAC and S-PAC are synthesized. The target polymers exhibit obvious thermally activated delayed fluorescence (TADF) activities with high photoluminescence quantum yieldsof 81%. Moreover, the chiral polymers display significant circularly polarized luminescence features, with luminescence dissymmetry factor (|glum|) of nearly 3 × 10-3. By using the chiral polymers as emitters, the corresponding circularly polarized organic light-emitting diodes (CP-OLEDs) exhibit efficient CPEL signals with electroluminescence dissymmetry factor|gEL| of 3.4 × 10-3 and high maximum external quantum efficiency (EQEmax) of 17.8%. Notably, considering both EQEmax and |gEL| comprehensively, the device performance of R-PAC and S-PAC is the best among all the reported CP-OLEDs with chiral conjugated polymers as emitters. This work provides a facile approach to constructing chiral conjugated TADF polymers and discloses the potential of axially chiral conjugated luminescent skeletons in architecting high-performance CP-OLEDs.

Exploring Efficient Blue TADF Materials with Ultrafast Bipolar Charge Transport for High‐Efficiency Thick‐Layer OLEDs

AbstractAchieving strong solid‐state photoluminescence and fast charge transport simultaneously for organic molecules is of significant importance but challenging because of the trade‐off between these properties. Herein, two tailored blue luminescent molecules constructed with ring‐fused carbonyl‐containing electron acceptors and spiro‐acridine electron donors are developed. Owing to ordered long‐range molecular alignment with proper interaction energies, their neat films exhibit ultrafast bipolar charge transport and strong delayed fluorescence with high quantum yields and short lifetimes. In doped organic light‐emitting diodes (OLEDs), both molecules display eminent electroluminescence performances with excellent external quantum efficiencies (EQEs) of 40.6%. They also exhibit brilliant blue lights with record‐beating EQEs of 30.2% in non‐doped thin‐layer OLEDs, and more importantly, high‐performance simplified non‐doped thick‐layer OLEDs are achieved, rendering lowered driving voltages, and the best EQEs of 23.0% with tiny efficiency roll‐offs. In addition, using them as sensitizers, remarkable EQEs of 40.1% and 23.2% with ultrasmall efficiency roll‐offs are realized in blue hyperfluorescence thin‐layer and thick‐layer OLEDs, respectively. The operational lifetimes are obviously elongated matter in non‐doped thick‐layer devices or hyperfluorescence thick‐layer devices. This work provides promising candidates for efficient simplified thick‐layer OLEDs and opens a new avenue toward organic molecules with strong delayed fluorescence and fast charge transport simultaneously.

Carbazole/triphenylamine-functionalized phenanthro[4,5-abc]phenazines: Synthesis and luminescence properties

Two phenanthro[4,5-abc]phenazine derivatives, 11-(3,6-di‑tert‑butyl‑9H-carbazol-9-yl)phenanthro[4,5-abc]phenazine (PyQ-Cz) and 4-(phenanthro[4,5-abc]phenazin-11-yl)-N,N-diphenylaniline (PyQ-TPA), were synthesized by grafting the an electron-donating carbazole and triphenylamine segments onto the pyrene-fused quinoxaline (PyQ) core, respectively and characterized by NMR (1H and 13C) and high resolution mass spectrometry. Their thermal, photophysical and electrochemical properties were systematically investigated. These compounds exhibited excellent thermal stability and intense yellow emission and orange emission in dichloromethane solution, whereas they exhibited green emission in solid films. Based on their high photoluminescence quantum yields and the frontier orbital energies, the doped devices with a structure of ITO/PEDOT:PSS (30 nm)/CBP:PyQ derivatives (x wt%) (25 nm)/TPBi (35 nm)/Liq (2 nm)/Al (150 nm) were fabricated by solution-processed the emitting layers to investigate their electroluminescence (EL) performances, in which the doped devices of PyQ-Cz exhibited the maximum external quantum efficiency (EQEmax) of 1.86 %, while the PyQ-TPA doped devices showed an EQEmax of 0.82 %.

Charge Injection and Auger Recombination Modulation for Efficient and Stable Quasi-2D Perovskite Light-Emitting Diodes.

The inefficient charge transport and large exciton binding energy of quasi-2D perovskites pose challenges to the emission efficiency and roll-off issues for perovskite light-emitting diodes (PeLEDs) despite excellent stability compared to 3D counterparts. Herein, alkyldiammonium cations with different molecular sizes, namely 1,4-butanediamine (BDA), 1,6-hexanediamine (HDA) and 1,8-octanediamine (ODA), are employed into quasi-2D perovskites, to simultaneously modulate the injection efficiency and recombination dynamics. The size increase of the bulky cation leads to increased excitonic recombination and also larger Auger recombination rate. Besides, the larger size assists the formation of randomly distributed 2D perovskite nanoplates, which results in less efficient injection and deteriorates the electroluminescent performance. Moderate exciton binding energy, suppressed 2D phases and balanced carrier injection of HDA-based PeLEDs contribute to a peak external quantum efficiency of 21.9%, among the highest in quasi-2D perovskite based near-infrared devices. Besides, the HDA-PeLED shows an ultralong operational half-lifetime T50 up to 479h at 20mA cm‒2, and sustains the initial performance after a record-level 30000 cycles of ON-OFF switching, attributed to the suppressed migration of iodide anions into adjacent layers and the electrochemical reaction in HDA-PeLEDs. This work provides a potential direction of cation design for efficient and stable quasi-2D-PeLEDs.

Highly efficient co-doped blue phosphorescent organic electroluminescent devices due to improved carriers balance and broadening recombination zone

High performance blue phosphorescent organic electroluminescent devices were realized by utilizing trivalent terbium complex and iridium complex as co-dopant and emitter, respectively. In this case, the co-doped trivalent terbium complex molecules within light-emitting layer function as deeper electron trappers due to its low-lying energy levels. Compared with reference device, co-doped devices displayed relatively higher electroluminescent performances due to improved carriers’ balance as well as broadening recombination zone. Finally, the optimal device with main emission peak at 462 nm obtained the maximum brightness, external quantum efficiency, current efficiency and power efficiency up to 24396 cd/m2, 26.3%, 46.93 cd/A and 50.82 lm/W, respectively. Meanwhile, even at the practical brightness of 1000 cd/m2 (4.3 V), prominent external quantum efficiency and current efficiency as high as 24.0% and 40.73 cd/A, respectively, can still be retained because the broadening recombination zone helps to decrease exciton density thus suppress exciton quenching.

All-fluorescent white organic light-emitting diodes employing a deep-blue HLCT material simultaneously as emitter and host achieving excellent electroluminescence performance with efficiency roll-off

Simultaneously achieving high efficiency and small efficiency roll-off remains a huge challenge for white organic light-emitting diodes (OLEDs), which greatly restricts their industrial application in the lighting field. Recently developed hybridized local and charge transfer (HLCT) materials have a “hot exciton” channel, which can maximize the utilization rate of excitons and suppress efficiency roll-off via rapid reverse intersystem crossing (RISC) from high-lying triplet state (Tn, n ≥ 2) to singlet state (S1). In this work, employing blue HLCT material pCzAnN as the sensitizing host, by precise concentration management, the traditional fluorescent C545T- and DCJTB-based green and orange-red OLEDs are first fabricated, which achieve the maximum external quantum efficiency (EQE) exceeding the theoretical limit of 5 %, reaching 8.51 % and 6.64 %, respectively. On this basis, by strategic device structure design, all-fluorescent two- and three-color white OLEDs are demonstrated having pCzAnN simultaneously as blue emitter and sensitizing host of C545T and DCJTB. The resulting two- and three-color white devices obtain maximum EQE beyond 5 %. What's more, all three-color white devices exhibit extremely small efficiency roll-off, where the efficiency drops are less than 1 % at a practical luminance of 1000 cd/m2, which is comparable to the best works reported in the literatures. At the same time, the optimized three-color white device realizes ideal white emission, in which the electroluminescence (EL) spectra contain three almost equal intensity emission wavebands accompanied by a high color rendering index of 87. Stable EL spectra under a wide luminance range (3863 ∼ 27710 cd/m2) indicate a huge potential application. We believe this work can provide new idea for developing high-efficiency and low roll-off white OLEDs in the future.

Near‐Unity Quantum Yield ZnSeTe Quantum Dots Enabled by Controlling Shell Growth for Efficient Deep‐Blue Light‐Emitting Diodes

AbstractCore–shell structural ZnSeTe/ZnSe/ZnS quantum dots (QDs) have attracted great attention for advanced illumination and displays because of their environmentally friendly composition, but still suffering from poor photoluminescence (PL) and electroluminescence (EL) performance due to severe non‐radiative charge recombination. Herein, a stepwise injection shell growth process to manipulate the monomer concentration and ensure adequate growth interval is devised, which enables the controllable uniform epitaxial growth of ZnSe and ZnS shells on the ZnSeTe core, thus relieving the lattice distortion and defects to greatly suppress the non‐radiative charge recombination. The ZnSeTe/ZnSe/ZnS QDs presented deep‐blue emission at 448 nm with narrow full width at half maximum (FWHM, 23 nm), and near‐unity PL quantum yield (PLQY, ≈100%) The light‐emitting diodes (LEDs) based on the QDs exhibited a high external quantum efficiency (EQE) of 10.9%, a maximum brightness of 10240 cd cm−2, and a high current efficiency of 7.9 cd A−1, demonstrating a good performance for deep blue QDs LEDs (QLEDs) This shell growth strategy will be an effective approach to achieving efficient QDs and QLEDs.

Eu3+ doped (Y0.75Sc0.25)2O3 red-emitting ceramics with excellent photoluminescence properties for LEDs

Developing narrow-band red-emitting ceramic phosphors with high quantum yield and low thermal quenching is vital for mid to high powder solid state lighting. In this study, a series of (Y0.75Sc0.25)2O3:Eu3+ ceramics were fabricated and their photoluminescence properties were studied. The spectral measurement suggests that the optimal doping concentration of Eu3+ is as high as 14%. The heavily doped samples show strong absorption in the NUV-blue region (particularly 360–420 nm and 460–475 nm), bright red emission dominated by the sharp peak located at 611 nm, CIE chromaticity coordinates close to the NTSC standard value of red emission, and single exponential photoluminescence decay without afterglow. In particular, ((Y0.75Sc0.25)0.86Eu0.14)2O3 ceramic exhibits high QY of 86.9%, high color purity of 96.9%, and low thermal quenching loss of 16% as the temperature increases from 300 to 570 K. The excellent photoluminescence properties highlight the great potential of Eu3+ heavily doped (Y0.75Sc0.25)2O3 red-emitting ceramics as color converters for solid state lighting, which is demonstrated by the outstanding electroluminescence performance of the fabricated red and white LEDs.

Cumulative lifetime enhancement effect of deuteration in blue organic light‐emitting diodes

AbstractThis research investigates the impact of deuteration on the operational lifetime of blue organic light‐emitting diodes (OLEDs). Our study focuses on the kinetic isotope effect (KIE) and how it enhances device lifetime. Specifically, we examine the effects of deuteration on OLEDs with emitters based on common polycyclic aromatic hydrocarbons by deuterating anthracene‐based host materials. Our findings show that the deuterated analogues with incremental deuterium substitutions exhibit similar electroluminescence (EL) performances but progressively prolonged device lifetimes as a function of deuteration, indicating a cumulative enhancement effect. We observed a twofold increase in device lifetime with partial deuterium substitutions, while highly deuterated hosts realized up to a fourfold improvement. Furthermore, we found that device degradation is initiated from the interface of the hole transport layer (HTL) and emitting layer (ETL), and deuteration can mitigate the degraded reactions in the devices, thereby improving operational stability. These results provide insight into how deuteration can increase the operational lifetime of OLEDs, which has important implications for developing more efficient and durable OLED materials.