Target Recognition Performance Research Articles

Transformer Discharge Carbon-Trace Detection Based on Improved MSRCR Image-Enhancement Algorithm and YOLOv8 Model

It is difficult to visually detect internal defects in a large transformer with a metal closure. For convenient internal inspection, a micro-robot was adopted, and an inspection method based on an image-enhancement algorithm and an improved deep-learning network was proposed in this paper. Considering the dim environment inside the transformer and the problems of irregular imaging distance and fluctuating supplementary light conditions during image acquisition with the internal-inspection robot, an improved MSRCR algorithm for image enhancement was proposed. It could analyze the local contrast of the image and enhance the details on multiple scales. At the same time, a white-balance algorithm was introduced to enhance the contrast and brightness and solve the problems of overexposure and color distortion. To improve the target recognition performance of complex carbon-trace defects, the SimAM mechanism was incorporated into the Backbone network of the YOLOv8 model to enhance the extraction of carbon-trace features. Meanwhile, the DyHead dynamic detection Head framework was constructed at the output of the YOLOv8 model to improve the perception of local carbon traces with different sizes. To improve the defect target recognition speed of the transformer-inspection robot, a pruning operation was carried out on the YOLOv8 model to remove redundant parameters, realize model lightness, and improve detection efficiency. To verify the effectiveness of the improved algorithm, the detection model was trained and validated with the carbon-trace dataset. The results showed that the MSH-YOLOv8 algorithm achieved an accuracy of 91.80%, which was 3.4 percentage points higher compared to the original YOLOv8 algorithm, and had a significant advantage over other mainstream target-detection algorithms. Meanwhile, the FPS of the proposed algorithm was up to 99.2, indicating that the model computation and model complexity were successfully reduced, which meets the requirements for engineering applications of the transformer internal-inspection robot.

Efficient and Lightweight Neural Network for Hard Hat Detection

Electric power operation, as one of the key fields in the world, faces particularly prominent safety issues. Ensuring the safety of operators has become the most fundamental requirement in power operation. However, there are some safety hazards in power construction. These hazards are mainly due to weak safety awareness among staff and the failure to standardize the wearing of safety helmets. In order to effectively address this situation, technical means such as video surveillance technology and computer vision technology can be utilized to monitor whether staff are wearing helmets and provide timely feedback. Such measures will greatly enhance the safety level of power operation. This paper proposes an improved lightweight helmet detection algorithm named YOLO-M3C. The algorithm first replaces the YOLOv5s backbone network with MobileNetV3, successfully reducing the model size from 13.7 MB to 10.2 MB, thereby increasing the model’s detection speed from 42.0 frames per second to 55.6 frames per second. Then, the CA attention mechanism is introduced into the backbone network to enhance the feature extraction capability of the model. Finally, in order to further improve the detection recall rate and accuracy of the model, a knowledge distillation of the model was carried out. The experimental results show that, compared with the original YOLOv5s algorithm, the average accuracy of the improved YOLO-M3C algorithm is improved by 0.123, and the recall rate is the same. These results verify that the algorithm YOLO-M3C has excellent performance in target detection and recognition, which can improve accuracy and confidence, while reducing false detection and missing detection, and effectively meet the needs of helmet-wearing detection.

Adaptive soft threshold transformer for radar high‐resolution range profile target recognition

AbstractRadar High‐Resolution Range Profile (HRRP) has great potential for target recognition because it can provide target structural information. Existing work commonly applies deep learning to extract deep features from HRRPs and achieve impressive recognition performance. However, most approaches are unable to distinguish between the target and non‐target regions in the feature extraction process and do not fully consider the impact of background noise, which is harmful to recognition, especially at low signal‐to‐noise ratios (SNR). To tackle these problems, the authors propose a radar HRRP target recognition framework termed Adaptive Soft Threshold Transformer (ASTT), which is composed of a patch embedding (PE) layer, ASTT blocks, and Discrete Wavelet Patch Merging (DWPM) layers. Given the limited semantic information of individual range cells, the PE layer integrates nearby isolated range cells into semantically explicit target structure patches. Thanks to its convolutional layer and attention mechanism, the ASTT blocks assign a weight to each patch to locate the target areas in the HRRP while capturing local features and constructing sequence correlations. Moreover, the ASTT block efficiently filters noise features in combination with a soft threshold function to further enhance the recognition performance at low SNR, where the threshold is adaptively determined. Utilising the reversibility of the discrete wavelet transform, the DWPM layer efficiently eliminates the loss of valuable information during the pooling process. Experiments based on simulated and measured datasets show that the proposed method has excellent target recognition performance, noise robustness, and small‐scale range shift robustness.

High-Order Temporal Convolutional Network for Improving Classification Performance of SSVEP-EEG

Background and objectiveSteady-state visual evoked potential (SSVEP)-based brain-computer interfaces (BCIs) aim to detect target frequencies corresponding to specific commands in electroencephalographic (EEG) signals by classification algorithms to achieve the desired control. However, SSVEP signals suffer from low signal-to-noise ratio and large differences in brain activity. Moreover, the existing CNN models have small receptive fields, which make it difficult to receive large range of feature information and limit the effectiveness of classification algorithms. MethodsTo this end, we proposed a high-order temporal convolutional neural network (HOT-CNN) model for enhancing the performance of SSVEP target recognition. Specifically, the SSVEP-EEG signals was divided into equal-length time segments and a time-slice attention module was designed to capture the correlation between time slices. The module improves the local characterization of signals and reduces biological noise interference by automatically assigning high weights to locally relevant temporal sampling cues and lower weights to other temporal cues. Moreover, for global features, a temporal convolutional network module was designed to increases the receptive field of the network and to extract more comprehensive time domain features by using dilated causal convolution. Finally, the fusion and analysis of local and global features are achieved by designing a feature fusion and classification module to accomplish accurate classification of SSVEP signals. ResultsOur method was evaluated on large publicly available datasets containing 35 subjects and 40 categories. Experimental results indicated that HOT-CNN achieved encouraging performance compared with other advanced methods: the highest information transfer rate of 241.01bits/min was obtained using 0.5s stimuli, and the highest average accuracy of 96.39% was obtained using 1.0s stimuli. ConclusionsThe method effectively reinforced the global and local time-domain information and improved the classification performance of SSVEP, which has wide application prospects.

Research on multi-dimensional micro-motion feature extraction of moving targets

The micro-Doppler effect is a physical phenomenon generated by the micro-motion of objects and their components, which have a significant influence on improving radar detection and resolution capability and also enhancing the radar imaging and target recognition performance. The extraction of micro-Doppler frequency, as a commonly used time-frequency analysis tool, is of great significance in extracting and reconstructing the signal with micro-motion targets. The micro-motion characteristics for moving targets can be verified by using simulation through combining the theory of micro-Doppler effect with the frequency domain model of electromagnetic waves. The simulation research on the micro-motion characteristics of a three-dimensional target is conducted by using the finite element method. The influences of environmental conditions such as relative humidity, visibility, and the presence or absence of turbulence on echo intensity and time-frequency relationship are investigated theoretically. The simulation results indicate that parameters such as relative humidity and visibility, which affect the atmospheric attenuation coefficient, can reduce echo intensity and the period of time-frequency curve. By triggering off beam drift in the transmission path, turbulence can lead to “frequency shift deformation” of the time-frequency curve, degrading the extraction of target motion attitude. A motion attitude classification method is proposed in order to study the micro-Doppler effect better. According to whether the frequency shift changes with time, the motion attitude can be divided into frequency shift time-invariant motion and time-variant motion. Frequency shift time-variant motion includes translation, rolling and vibration. Vibration and rolling are motions that periodically change with time, requiring the comparison of instantaneous frequency shifts at any three times within a cycle. Translation is a time-variant motion with irregular frequency shifts over time, which involves studying instantaneous frequency shifts at any three times. Transient frequency shifts should be analyzed and compared at different times for these motions. The frequency shift time-invariant motion is mainly rotation obtained experimental results indicate that the amplitude, plus-minus, and spectral width of frequency shift at different positions are aimed at inverting the target shape, attitude, direction and velocity. Demodulating one-dimensional data obtained from the FFTshift function can obtain the time-frequency-intensity relationship. This multi-parameter analysis method is a multi-dimensional processing method widely used in the fields of radar, sonar, and communication. The above research is conductive to the measurement of target macroscopic shape properties and the extraction of microscopic motion information, which lays the foundation for radar detection and recognition.

Design of 360° Dead-Angle-Free Smart Desk Lamp based on Visual Tracking

Objectives: This study aims to design a dead-angle-free smart desk lamp. Methods: The convolutional neural network (CNN) algorithm was used to realize the identification and positioning of objects. Then, the desk lamp arm was driven according to positioning to realize dead-angle-free illumination. In the subsequent testing, the designed desk lamp was compared with others driven by the support vector machine (SVM) and back-propagation neural network (BPNN) algorithms. Findings: The CNN algorithm implemented in the smart desk lamp demonstrated superior target recognition performance and positioning accuracy when compared to the other two algorithms. Moreover, with this algorithm, the smart desk lamp efficiently generated tracking responses for targets and displayed minimal positioning errors once tracking became stable. Novelty:The novelty of this article lies in the utilization of the CNN algorithm to achieve visual tracking for a smart desk lamp, which serves as the basis for its automatic adjustment. Doi: 10.28991/HIJ-2023-04-04-05 Full Text: PDF

SAR-ATR with knowledge hierarchy division and information dissemination networks

Synthetic aperture radar (SAR) images possess diverse domain characteristics that describe targets from multiple perspectives, including scattering center, intensity, phase, azimuth angle, and shadow. The imaging mechanism of SAR images significantly differs from optical images due to its use of radio waves instead of visible light for imaging purposes. However, current deep learning (DL)-based automatic target recognition (ATR) approaches for SAR primarily focus on the intensity information while neglecting the comprehensive consideration of SAR domain characteristics. This limitation results in insufficient expression of target features and hampers further improvement in SAR target recognition performance. To address these issues, this paper proposes a novel SAR target recognition method called KDNets based on information dissemination networks (IDNets) and knowledge hierarchy division (KnHD). KDNets effectively enhances the feature representation ability of SAR targets by exploiting multiple domain characteristics at sample, feature, and decision levels. Specifically, IDNets incorporates scattering center and azimuth angle at sample and feature levels to extract rich multi-scale semantic features for representing SAR targets. At the decision stage, KnHD utilizes azimuth information to rapidly search and fuse prior knowledge about targets from a knowledge base to achieve interpretable and high-precision SAR target recognition. Experimental results on the MSTAR dataset and MA-SAR dataset demonstrate that our proposed KDNets can achieve state-of-the-art performance in SAR target recognition tasks, with the accuracy of 99.75 % in the MSTAR dataset and 98.61 % in the MA-SAR dataset, validating its effectiveness and superiority. Furthermore, this study highlights the significant potential and application prospects of leveraging domain characteristics in SAR-ATR tasks.

An Effective Method for Underwater Biological Multi-Target Detection Using Mask Region-Based Convolutional Neural Network

Underwater creatures play a vital role in maintaining the delicate balance of the ocean ecosystem. In recent years, machine learning methods have been developed to identify underwater biologicals in the complex underwater environment. However, the scarcity and poor quality of underwater biological images present significant challenges to the recognition of underwater biological targets, especially multi-target recognition. To solve these problems, this paper proposed an ensemble method for underwater biological multi-target recognition. First, the CutMix method was improved for underwater biological image augmentation. Second, the white balance, multiscale retinal, and dark channel prior algorithms were combined to enhance the underwater biological image quality, which could largely improve the performance of underwater biological target recognition. Finally, an improved model was proposed for underwater biological multi-target recognition by using a mask region-based convolutional neural network (Mask-RCNN), which was optimized by the soft non-maximum suppression and attention-guided context feature pyramid network algorithms. We achieved 4.97 FPS, the mAP was 0.828, and the proposed methods could adapt well to underwater biological multi-target recognition. The recognition effectiveness of the proposed method was verified on the URPC2018 dataset by comparing it with current state-of-the-art recognition methods including you-only-look-once version 5 (YOLOv5) and the original Mask-RCNN model, where the mAP of the YOLOv5 model was lower. Compared with the original Mask-RCNN model, the mAP of the improved model increased by 3.2% to 82.8% when the FPS was reduced by only 0.38.

Aerial Gaze Target Recognition Based on Head and Eye Movements

Aerial gaze target recognition is an important step in aerial eye control interaction. In order to achieve accurate aerial gaze target recognition, the VT4LM recognition algorithm was constructed in this paper. By this algorithm, the facial images containing the eyes of the flight operators were first inputted into Vision Transformer (ViT) to extract the local features, and the head posture of the flight operators was inputted into four LSTMs to extract the global features. Then, the local and global features of the flight operators were inputted into three fully connected layers, two dropout layers and one softmax classifier. Finally, the recognition result of aerial gaze target was obtained. In this paper the effectiveness of the VT4LM recognition algorithm was verified through the identification of four aerial line-of-sight gaze targets named Head-up display, Accelerator push rod, Control lever and Rudder by four flight operators during simulated flight. The experimental results showed that the accuracy of the VT4LM algorithm for aerial gaze target recognition reached 89.29% and the Cross Entropy Loss was 1.45. Compared to the other three recognition methods, the VT4LM algorithm had the highest recognition accuracy and minimum loss. When using the VT4LM algorithm to detect four simulated flight operators staring at four aerial gaze targets, the recognition accuracy was all higher than 85.00%. It could be seen that the VT4LM algorithm had a good performance in aerial gaze target recognition.

Dual-band polarimetric HRRP recognition via a brain-inspired multi-channel fusion feature extraction network.

Radar high-resolution range profile (HRRP) provides geometric and structural information of target, which is important for radar automatic target recognition (RATR). However, due to the limited information dimension of HRRP, achieving accurate target recognition is challenging in applications. In recent years, with the rapid development of radar components and signal processing technology, the acquisition and use of target multi-frequency and polarization scattering information has become a significant way to improve target recognition performance. Meanwhile, deep learning inspired by the human brain has shown great promise in pattern recognition applications. In this paper, a Multi-channel Fusion Feature Extraction Network (MFFE-Net) inspired by the human brain is proposed for dual-band polarimetric HRRP, aiming at addressing the challenges faced in HRRP target recognition. In the proposed network, inspired by the human brain's multi-dimensional information interaction, the similarity and difference features of dual-frequency HRRP are first extracted to realize the interactive fusion of frequency features. Then, inspired by the human brain's selective attention mechanism, the interactive weights are obtained for multi-polarization features and multi-scale representation, enabling feature aggregation and multi-scale fusion. Finally, inspired by the human brain's hierarchical learning mechanism, the layer-by-layer feature extraction and fusion with residual connections are designed to enhance the separability of features. Experiments on simulated and measured datasets verify the accurate recognition capability of MFFE-Net, and ablative studies are conducted to confirm the effectiveness of components of network for recognition.

Multi-Aspect SAR Target Recognition Based on Non-Local and Contrastive Learning

Synthetic aperture radar (SAR) automatic target recognition (ATR) has been widely applied in multiple fields. However, the special imaging mechanism of SAR results in different visual features of the same target at different azimuth angles, so single-aspect SAR target recognition has the limitation of observing the target from a single perspective. Multi-aspect SAR target recognition technology can overcome this limitation by utilizing information from different azimuths and effectively improve target recognition performance. Considering the order dependency and data limitation of existing methods, this paper proposes a multi-aspect SAR recognition method based on Non-Local, which applies a self-attention calculation to feature maps to learn the correlation between multi-aspect SAR images. Meanwhile, in order to improve the generalization ability of the proposed method under limited data, a network based on contrastive learning was designed to pre-train the feature extraction part of the whole network. The experimental results using the MSTAR dataset show that the proposed method has excellent recognition accuracy and good robustness.

Multiview synthetic aperture radar target recognition method using joint sparse representation and random weight matrix

Multiview synthetic aperture radar (SAR) images could provide richer information for target recognition as reported in previous works. This study exploits multiview SAR images with application to target recognition via the combination of joint sparse representation (JSR) and random weight matrix. First, the multiview SAR images are clustered into several view sets via a coarse clustering algorithm. In this way, the views in each set tend to share high correlations so they can be properly represented with JSR. For the reconstruction errors from different views, they are fused through a random weight matrix, which includes a rich set of linear weight vectors. Afterwards, the fused errors at different choices of weight vectors are analyzed to form a decision value for target recognition, which could better reflect the differences between different classes through multiview SAR images in comparison with traditional JSR-based methods. Therefore, the overall SAR target recognition performance can be effectively enhanced. Experiments are investigated on the moving and stationary target acquisition and recognition dataset under several operating conditions. The results reveal the high effectiveness of the proposed method under standard operating condition and good robustness under typical extended operating conditions including depression angle variance, configuration variants, noise corruption, partial occlusion, and resolution variance.

Elimination of optical phase sensitivity in a shift, scale, and rotation invariant hybrid opto-electronic correlator via off-axis operation.

The hybrid opto-electronic correlator (HOC) uses a combination of optics and electronics to perform target recognition. Achieving a stable output from this architecture has previously presented a significant challenge due to a high sensitivity to optical phase variations, limiting the real-world feasibility of the device. Here we present a modification to the architecture that essentially eliminates the dependence on optical phases, and demonstrate verification of the proposed approach. Experimental results are shown to agree with the theory and simulations, for scale, rotation and shift invariant image recognition. This approach represents a major innovation in making the HOC viable for real-world applications.

Customization of aptamer to develop CRISPR/Cas12a-derived ultrasensitive biosensor

The CRISPR/Cas systems have provided wide biosensing applications. Particularly, the aptamer-involved CRISPR/Cas sensor system powerfully expanded to non-nucleic-acid targets. However, tailoring the sequence of the aptamer to explore the relationship between affinity and the activation of CRISPR/Cas12a trans-cleavage activity has not been reported yet. Herein, we developed a series of new aptamers toward the spike protein 1(S1) of SARS-CoV-2. Surface plasmon resonance measurements showed that the affinity of these aptamers to S1 was at the nM level. Subsequently, a “SET” effect (Sequence Essential Trans-cleavage activity) is discovered for the activation of CRISPR/Cas12a trans-cleavage activity. That is, an aptamer, as the activator, sequence needs to be tailored to activate CRISPR/Cas12a efficiently. A balance should be reached between affinity and activation ability. On the one hand, high affinity ensures target recognition performance, and on the other hand, activation can achieve adequate amplification and output of recognition signals. The optimized sequence (with 27 nucleotides, for short 27-nt) not only recognizes the target with a high affinity and specificity but also can trigger the CRISPR/Cas12a trans-cleavage activity efficiently, showing an excellent detection performance in electrochemical biosensors. The detection limit for SARS-CoV-2 S1 can be low at 1.5 pg mL−1. The new CRISPR/Cas12a-derived aptasensor also displays a remarkable ability to detect Beta, Delta, and Omicron variants but is selective toward other kinds of proteins. Above all, it is robust for point-of-care testing (POCT) in complex biological fluids, such as saliva, urine, and serum, and provides a universal and scalable detecting platform. Our results provide new insights into aptamer development and a different strategy for COVID-19 antigen detection and biosensor development.

VFR: The Underwater Acoustic Target Recognition Using Cross-Domain Pre-Training with FBank Fusion Features

Underwater acoustic target recognition is a hot research area in acoustic signal processing. With the development of deep learning, feature extraction and neural network computation have become two major steps of recognition. Due to the complexity of the marine environment, traditional feature extraction cannot express the characteristics of the targets well. In this paper, we propose an underwater acoustic target recognition approach named VFR. VFR adopts a novel feature extraction method by fusing three-dimensional FBank features, and inputs the extracted features into a residual network, instead of the classical CNN network, plus cross-domain pre-training to perform target recognition. The experimental results show that VFR achieves 98.5% recognition accuracy on the randomly divided ShipsEar dataset and 93.8% on the time-divided dataset, respectively, which are better than state-of-the-art results.

Synthetic aperture radar target recognition via deep attention convolutional network assisted by multiscale residual despeckling network

Owing to the inherent characteristics of synthetic aperture radar (SAR) imaging system based on the coherent imaging modality, SAR images are inevitably corrupted by speckle noise, thereby affecting SAR target recognition accuracy. We explore the impact of speckle noise on SAR target recognition performance. Subsequently, we propose a deep attention convolutional network assisted by a multiscale residual despeckling network to improve SAR target recognition accuracy under speckle corruption. Noise information is first learned via a despeckling subnetwork consisting of dual-branch multiscale feature extraction, feature fusion, and adaptive feature channel selection. Then a classification subnetwork with a cross-dimension interaction attention mechanism is designed to realize feature extraction and identity reasoning of SAR targets. Experimental results on the benchmark moving and stationary target acquisition and recognition dataset demonstrate the effectiveness and superiority of the proposed method.

A Novel Deep Learning Method for Underwater Target Recognition Based on Res-Dense Convolutional Neural Network with Attention Mechanism

Long-range underwater targets must be accurately and quickly identified for both defense and civil purposes. However, the performance of an underwater acoustic target recognition (UATR) system can be significantly affected by factors such as lack of data and ship working conditions. As the marine environment is very complex, UATR relies heavily on feature engineering, and manually extracted features are occasionally ineffective in the statistical model. In this paper, an end-to-end model of UATR based on a convolutional neural network and attention mechanism is proposed. Using raw time domain data as input, the network model combines residual neural networks and densely connected convolutional neural networks to take full advantage of both. Based on this, a channel attention mechanism and a temporal attention mechanism are added to extract the information in the channel dimension and the temporal dimension. After testing the measured four types of ship-radiated noise dataset in experiments, the results show that the proposed method achieves the highest correct recognition rate of 97.69% under different working conditions and outperforms other deep learning methods.

Bayesian-Based Classification Confidence Estimation for Enhancing SSVEP Detection

The brain-computer interface (BCI) enables paralyzed people to directly communicate with and operate peripheral equipment. The steady-state visual evoked potential (SSVEP)-based BCI system has been extensively investigated in recent years due to its fast communication rate and high signal-to-noise ratio. Many present SSVEP recognition methods determine the target class via finding the largest correlation coefficient. However, the classification performance usually degrades when the largest coefficient is not significantly different from the rest of the values. This study proposed a Bayesian-based classification confidence estimation method to enhance the target recognition performance of SSVEP-based BCI systems. In our method, the differences between the largest and the other values generated by a basic target identification method are used to define a feature vector during the training process. The Gaussian mixture model (GMM) is then employed to estimate the probability density functions of feature vectors for both correct and wrong classifications. Subsequently, the posterior probabilities of being an accurate and false classification are calculated via Bayesian inference in the test procedure. A classification confidence value (CCValue) is presented based on two posterior probabilities to estimate the classification confidence. Finally, the decision-making rule can determine whether the present classification result should be accepted or rejected. Extensive evaluation studies were performed on an open-access benchmark dataset and a self-collected dataset. The experimental results demonstrated the effectiveness and feasibility of the proposed method for improving the reliability of SSVEP-based BCI systems.

Topology optimization design of dual-channel metasurface structure with controllable amplitude of retroreflection and mirror reflection

For oblique incident electromagnetic waves, the generation of double reflection channels including retroreflection channel is of great significance in improving target recognition performance and navigation performance. In double channel reflection, controlling the ratio of retroreflection to specular reflection is the key to realizing reflection power distribution. In order to realize the control of the proportion of the reflected power in each channel, a topology optimization method for designing the reflective metasurface microstructure with dual channel is proposed in this paper. The implementation mechanism is investigated, physical model of metasurface with dual reflection channel including retroreflection channel is established, and the topology optimization model of metasurface microstructure with specific power ratio of the retroreflection to specular reflection is established. As a numerical example, a dual channel metasurface reflector with a 1∶1 ratio of retroreflection power to specular reflection power is designed for a 10 GHz plane wave in the TE mode with a pitch angle of –30°. The designed metasurface exhibits strong directionality in the retroreflective direction, and the reflection amplitudes in both directions are similar. The retroreflective metasurface with the maximum retroreflection ratio is designed. The retroreflection ratio of the designed metasurface is 0.093. There is no specular reflection or other singular reflection, and the strong reflection on the metasurface is concentrated at –30°. The ratio of the main beam power to the total reflection power is 0.900. The simulated and experimental results verify the feasibility of the proposed method.

Cross Domain Correlation Maximization for Enhancing the Target Recognition of SSVEP-Based Brain-Computer Interfaces.

The target recognition performance of steady-state visual evoked potential (SSVEP)-based brain-computer interfaces can be significantly improved with a training-based approach. However, the training procedure is time consuming and often causes fatigue. Consequently, the number of training data should be limited, which may reduce the classification performance. Thus, how to improve classification accuracy without increasing the training time is crucial to SSVEP-based BCI system. This study proposes a transfer-related component analysis (TransRCA) method for addressing the above issue. In this method, the SSVEP-related components are extracted from a small number of training data of the current individual and combined with those extracted from a large number of existing training data of other individuals. The TransRCA method maximizes not only the inter-trial covariances between the source and target subjects, but also the correlation between the reference signals and SSVEP signals from the source and target subjects. The proposed method was validated on the SSVEP public Benchmark and BETA datasets, and the classification accuracy and information transmission rate of the ensemble version of the proposed TransRCA method were compared with those of the state-of-the-art eCCA, eTRCA, ttCCA, LSTeTRCA, and eIISMC methods on both datasets. The comparison results indicate that the proposed method provides a superior performance compared with these state-of-the-art methods, and thus has high potential for the development of a SSVEP-based brain-computer interface system with high classification performance that only uses a small number of training data.