Perchlorate Salts Research Articles

High‐Entropy Electrolyte Driven by Multi‐Solvation Structures for Long‐Lifespan Aqueous Zinc Metal Pouch Cells

Aqueous zinc metal batteries (AZMBs) are promising for grid‐scale energy storage due to their low cost and high safety. However, poor stability and an unfavorable freezing point hinder their actual application. Herein, a ternary salts‐based high‐entropy electrolyte (HEE) composed of Zn0.2Na0.4Li0.4(ClO4)1.2·7H2O is proposed to address the above issues. The addition of perchlorate salts with different cations reduces the size of ion clusters, significantly increases the solvation structure species, and promotes the anion‐rich Zn2+ solvation structures, resulting in an enlarged electrochemical stability window, favorable viscosity and ionic conductivity, and low freezing point. Furthermore, characterization and calculations confirm that multiple types of solvation structures effectively increase the electrolyte entropy. As a consequence, the Zn/Zn symmetric cells in HEE can sustainably cycle for at least 1000 hours and 1500 hours under room and subzero temperatures, respectively. The Na0.33V2O5/Zn and polyaniline/Zn full cells can even last for 30000 and 20000 cycles without capacity decay at −20 °C, respectively. The pouch cells employing HEE deliver promising capacity and stability, even at high mass loading of active materials. This strategy of introducing multiple salts with different cations to construct a high‐entropy environment provides a facile approach for high‐performance and long‐lifespan AZMBs across a wide temperature range.

High-Entropy Electrolyte Driven by Multi-Solvation Structures for Long-Lifespan Aqueous Zinc Metal Pouch Cells.

Aqueous zinc metal batteries (AZMBs) are promising for grid-scale energy storage due to their low cost and high safety. However, poor stability and an unfavorable freezing point hinder their actual application. Herein, a ternary salts-based high-entropy electrolyte (HEE) composed of Zn0.2Na0.4Li0.4(ClO4)1.2·7H2O is proposed to address the above issues. The addition of perchlorate salts with different cations reduces the size of ion clusters, significantly increases the solvation structure species, and promotes the anion-rich Zn2+ solvation structures, resulting in an enlarged electrochemical stability window, favorable viscosity and ionic conductivity, and low freezing point. Furthermore, characterization and calculations confirm that multiple types of solvation structures effectively increase the electrolyte entropy. As a consequence, the Zn/Zn symmetric cells in HEE can sustainably cycle for at least 1000 hours and 1500 hours under room and subzero temperatures, respectively. The Na0.33V2O5/Zn and polyaniline/Zn full cells can even last for 30000 and 20000 cycles without capacity decay at -20 °C, respectively. The pouch cells employing HEE deliver promising capacity and stability, even at high mass loading of active materials. This strategy of introducing multiple salts with different cations to construct a high-entropy environment provides a facile approach for high-performance and long-lifespan AZMBs across a wide temperature range.

Synthesis, crystal structure, Hirshfeld surface analysis, DFT computations and protein binding efficiency of a 1-D Ni(II) chain derived from a tridentate Schiff base ligand

A new Ni(II)-azido 1-D coordination polymer, [Ni2L2(μ1,1-N3)(μ1,3-N3)]n, was obtained through reaction of 1-[(3-dimethylamino-propylimino)-methyl]-naphthalen-2-ol (HL) and the perchlorate salt of nickel(II) in the presence of pseudohalide azide. X-ray crystallography and spectroscopic experiments (IR and UV-Vis) were used to describe this coordination polymer (CP). Single crystal X-ray studies revealed that the CP is a one-dimensional chain of Ni(II) in which the neighboring dimeric units (triply bridged by di-μ2-phenoxidoand µ1,1-N3) are further connected by μ1,3-azido bridges in a zig-zag fashion. The cooperative participation of N···H hydrogen bonding, π···π stacking and C-H···π interactions occur during crystal packing. A 2-D supramolecular architecture with star-shaped voids results from additional C–H···π stacking interactions. Hirshfeld surface analysis was used to look at the intermolecular interactions. DFT studies were carried out to calculate the HOMO-LUMO band gap of the ligand as well as the coordination polymer. Interaction of the CP with bovine serum albumin (BSA) protein was investigated spectroscopically by absorption and fluorescence titration methods. The result showed that the CP could quench the intrinsic fluorescence of BSA. Fluorescence resonance energy transfer (FRET) studies revealed that energy transfer takes place from BSA to the CP. Cyclic voltammetry of the CP indicated an irreversible cathodic redox couple assigned to Ni(II)/Ni(I).

Improving supercapacitor performance with novel potato starch-PVA solid polymer electrolyte blend modified by sodium perchlorate-glycerol additives

The synthesis and analysis of Solid Polymer Electrolytes (SPEs) derived from a blend of Potato Starch and Poly Vinyl Alcohol (PS-PVA), enhanced with Sodium perchlorate salt (NaClO4) and Glycerol (GCL) are explored in this work. Our focus is on their suitability for Electrical Double-Layer Capacitor (EDLC) devices. GCL, a non-toxic substance, served as the plasticizer, and sodium perchlorate was incorporated to enhance the ionic conductivity of the SPE film. The conductivity at room temperature for pure PS-PVA blend, in the absence of salt and GCL, was found to be 4.16 × 10−8 S cm−1. Upon adding an optimized quantity of NaClO4 salt, the conductivity increased to 1.02 × 10−5 S cm−1. Subsequent plasticization of the salt-polymer blend with GCL induced NaClO4 dissociation, further augmenting the conductivity by one order of magnitude. A conductivity value of 10.35 × 10−5 S cm−1 was achieved for the film with 30 wt% GCL. Morphological, electrical, and structural analyses revealed that synthesized polymer films exhibited favorable characteristics. The suitability of these electrolytes for Electric Double-Layer Capacitors (EDLC) was studied using electrochemical characterizations and cycling tests for 2000 cycles. The findings demonstrate their potential for use in energy storage devices, showcasing excellent performance in specific capacitance, energy, and power densities.

Supramolecular hybrid of 4-aminopyridinium Perchlorate: Synthesis, molecular structure characterization, vibrational spectroscopy, thermal analysis, and optical property evaluation

A hybrid material, 4-aminopyridinium perchlorate salt [C5H6N2][C5H7N2] ClO4, was synthesized at room temperature by slow evaporation and characterized by single-crystal X-ray, spectroscopic techniques (FT-IR, Raman, and UV–Visible), thermal studies (TGA and DSC). The crystallographic data obtained from single crystal X-ray analysis showed that the compound adopts the monoclinic system, space group P21/n, with the following parameters a = 10.8317(8) Å, b = 9.0529(5) Å, c = 13.7032(9) Å, β = 99.243(3) °, Z = 4 and V = 1326.27(15) Å3. The stability of the supramolecular structure was ensured by hydrogen bonding contacts with N-H…O lengths ranging between 2.749 and 2.940 Å. According to the results of Hirshfeld analysis, O…H interactions constitute the main intermolecular interaction contacts (46 %). The thermal decomposition of the precursors, studied by TGA and DSC analysis, indicates that the compound exhibits thermal stability up to 130 °C, beyond which it degrades. Infrared and Raman spectra were recorded at room temperature, confirming the existence of vibrational modes corresponding to organic and inorganic groups. Additionally, the optical properties of the synthesized compound exhibit UV–Visible absorption and interesting photoluminescence properties. The related HOMO-LUMO orbital energies were also highlighted using TDDFT calculations the B3LYP/6-31G (d,p) level of theory.

Flexible magnesium-ion-conducting solid poly-blend electrolyte films for magnesium-ion batteries

Solid biodegradable polymer electrolyte systems are considered the optimal choice for energy storage devices because they are both cost-effective and energy-efficient. A solid blend polymer electrolyte (SBPE) membrane capable of transporting magnesium ions was prepared using a mixture of 70 wt% methylcellulose, 30 wt% chitosan, and varying wt% magnesium perchlorate salt. X-ray diffraction analysis revealed an increase in the amorphous nature caused by the inclusion of Mg(ClO4)2 salt in the polymer blend matrix. A Fourier transform infrared spectroscopy study of samples containing varying salt concentrations revealed secondary interactions between polymer segments and salt, which provides the basis for energy density. Moreover, through impedance analysis, it was determined that the bulk resistance decreased with increasing salt concentration. The SBPE containing 30 wt% magnesium perchlorate exhibited the highest ionic conductivity, with a value of 2.49 × 10–6 S cm−1. A comprehensive evaluation of the ion transport parameters, including mobility, carrier density, and diffusion, was conducted for the prepared electrolyte samples. Notably, an ionic transference number (tion) of approximately 0.83 was observed for the SBPE sample with 30 wt% magnesium salt, indicating ions’ prevalence as the system’s primary charge carriers. Electrochemical analyses demonstrated that the SBPE with the highest ion conductivity possessed an electrochemical stability window (ESW) of 1.92 V. Additionally, the thermal characteristics of the samples were evaluated using thermogravimetric analysis (TGA) to assess the thermal stability of the electrolyte. Finally, the highest conducting polymer electrolyte was employed to construct a primary magnesium battery, and its discharge profile with different cathode materials was studied. Based on these findings, the current study suggests an environmentally friendly, biodegradable, and economically viable electrolyte option suitable for separator cum electrolytes in magnesium-ion batteries.

Low-Temperature Water Electrolysis Under a Sustained pH-Gradient for the Electrochemically-Induced Decarbonation of Limestone into Hydrated Lime

Conventional low-temperature water electrolysis processes operate either at high or low pH to enhance conductivity, minimizing electrical resistance. Neutral water electrolysis in a buffer solution is considered non-competitive due to higher energy consumption. Nevertheless, interest in water electrolysis using a salt-based electrolyte has grown due to its ability to generate a pH gradient inside the cell. Electrolysis using a neutral salt-based electrolyte has higher operating costs due to its higher standard equilibrium potential (due to the pH gradient) and lower conductivity. Although this approach incurs higher operating costs, it presents a unique advantage: the production of additional valuable elements thanks to the pH gradient generated.In 2019, Ellis & al. [1] highlighted the possibility to use this pH gradient to electrify the production of hydrated lime (calcium hydroxide). Lime has applications in different areas such as the removal of impurities during steel production and aqueous or gaseous effluent treatments. It can also be used as a precursor of cement. Cement production is accounting for 8% of global CO2 emissions. The acidity generated by water oxidation at the anode dissolves the calcium carbonate inserted. Carbon dioxide from the dissolution is recovered with the oxygen generated. The calcium cations migrate through the cationic membrane towards the cathodic compartment to react with the hydroxide ions generated by water reduction at the cathode. Calcium hydroxide is finally collected after precipitation. Figure 1 compares the conventional process with the electrochemical way and describes more precisely the steps involved in Figure 1. More recently, another way of exploiting this gradient has been proposed by Ni & al. [2] for the recycling of spent Li-ion batteries. With the growing interest in process electrification, other applications may emerge.In this paper, this hybrid electrochemical system for the simultaneous production of hydrogen, oxygen and calcium hydroxide has been intensively studied. Water electrolysis has been performed in a two-compartment cell at different applied currents. Calcium concentration and pH measurement enabled the study of the sub-step efficiencies and equilibria in anodic and cathodic chambers. Perfect faradic efficiencies were obtained with perchlorate salt electrolytes and platinum-free electrodes. The establishment of the pH gradient has been proven and correlated with the transport number of protons through the cationic membrane. Finally, the kinetics of calcium ion migration and calcium hydroxide precipitation have been investigated as well. Continuous addition of calcium carbonate as opposed to a single excess addition was shown to be able to tune the working pH in the anodic compartment and thereby reducing the risk of precipitation on the membrane. Our experimental results lead to the formulation of practical recommendations for achieving optimal reaction stoichiometry in each stage. These findings pave the way for scaling up a promising new sustainable process for lime and cement production.[1] L. D. Ellis, A. F. Badel and M. L. Chiang, "Toward electrochemical synthesis of cement," PNAS, vol. 117, no. 23, pp. 12584-12591, 2019.[2] N. Jihong, Z. Jiayin, B. Jinhong and G. Xiaofei, "Recycling the cathode materials of spent Li-ion batteries in a H-Shaped neutral water electrolysis cell," Separation and Putification Technology , vol. 278, p. 119485, 2022. Figure 1 - Conventional and electrochemical production route of Ca(OH)2 and a simplified scheme of the hybrid electrolyzer used in this work, with the reactions involved. Figure 1

Effects of temperature, chloride and perchlorate salt concentration on the metabolic activity of Deinococcus radiodurans

The extremophile bacterium Deinococcus radiodurans is characterized by its ability to survive and sustain its activity at high levels of radiation and is considered an organism that might survive in extraterrestrial environments. In the present work, we studied the combined effects of temperature and chlorine-containing salts, with focus on perchlorate salts which have been detected at high concentrations in Martian regolith, on D. radiodurans activity (CO2 production rates) and viability after incubation in liquid cultures for up to 30 days. Reduced CO2 production capacity and viability was observed at high perchlorate concentrations (up to 10% w/v) during incubation at 0 or 25 °C. Both the metabolic activity and viability were reduced as the perchlorate and chloride salt concentration increased and temperature decreased, and an interactive effect of temperature and salt concentration on the metabolic activity was found. These results indicate the ability of D. radiodurans to remain metabolically active and survive in low temperature environments rich in perchlorate.

On the viability of electrochemical carbon dioxide in-situ resource utilization to produce chemical feedstocks on Mars

The long-term, crewed exploration of Mars is a priority for both national and private space entities. Given economical constraints on the mass sent off-world from Earth, in situ resource utilization (ISRU) through ultra-low temperature CO2-H2O electrolyzer technology that is fed using the Martian atmosphere’s CO2 (∼95 %) and the subsurface Martian water cycle (enabled by perchlorate salts that depress the Martian brine’s freezing point to < 213 K) has been proposed as a pathway towards fuel and chemical feedstock. Herein we applied a validated, computationally frugal electrolyzer model to a Martian CO2-H2O electrolyzer and examined its viability. Through a judicious combination of catalysts, such electrolyzers could produce O2, CO, HCHO, CH3OH, CH4, C2H4, and C2H5OH even at ambient Martian temperatures (∼237 K). Our modeling herein shows the theoretical production of these key resources in acidic electrolyzers to be at a scalable rate of 0.052 – 1.13 g per cm2 per day of CO, 0.0004 – 0.086 g per cm2 per day of CH3OH, 0.001–0.048 g per cm2 per day of CH4, 0.0164 – 0.171 g per cm2 per day of C2H4, 0.008 – 0.0125 g per cm2 per day of C2H5OH. A range of catalyst candidates were examined for product selectivity, energy efficiency and throughput. Ambient temperature CO2-H2O electrolysis is shown to be an energy efficient approach to chemical feedstocks needed for the sustained exploration of Mars and beyond. This model can inform future astronaut life support device development for NASA and other space faring entities.

UV cross-linked highly stable polymer garnet composite electrolyte with improved interphase for lithium metal batteries

The next-generation electric vehicles heavily rely on high-energy–density lithium metal batteries with enhanced safety. Replacing liquid electrolytes with solid-state polymer electrolytes offers superior protection, high flexibility, and stability. However, inadequate ionic conductivity and poor compatibility at the interfaces with the electrodes hinder the practical application of solid-state electrolytes. In this work, we developed a polyethylene glycol-based, highly cross-linked polymer electrolyte with a garnet-type, fast Li+ conductive Li6.2Al0.24La3Zr2O12 (Al-LLZO) filler. The Al-LLZO filler was incorporated into a cross-linking functional polymeric matrix of polyethylene glycol diacrylate, pentaerythritol tetrakis (3-mercaptopropionate), and lithium perchlorate salt. The cross-linked polymer garnet composite electrolyte (CPGCE) was prepared via UV-induced photo-polymerization. The resulting CPGCE exhibits superior free-standing flexibility, a desired ionic conductivity of 4.4 × 10−4 S cm−1, and a wide potential window up to 4.2 V. The Li|CPGCE|Li symmetric cell underwent stripping and plating at varying current densities of 0.05 to 0.3 mA cm−2, displaying a low overpotential range from ±0.02 V to ±0.08 V over 500 cycles. Similarly, the as-cycled Li|CPGCE|Li showed excellent stripping and plating performance at 0.1 mA cm−2 for 500 cycles at 60 °C. The incorporation of the Al-LLZO nanofiller provided active sites with continuous Li+ conducting pathways, suppressing the growth of dead lithium dendrites. The Li|CPGCE|LiFePO₄ full cell exhibited a discharge capacity of 155 mAh g−1 at a rate of 0.1C, with a coulombic efficiency of 96 % over 50 cycles at 25 °C. This work offers a straightforward and convenient approach to creating highly durable polymer composite electrolytes with enhanced interfacial stability, advancing the implementation of all-solid-state lithium metal batteries.

On Tautomerism and Amphoterism: An In-Depth Structural and Physicochemical Characterization of Ammeline and Some of Its Salts.

Ammeline is a simple, readily available, molecular compound, which has been known for nearly 200 years. Despite that, no proper structural characterization of ammeline has been conducted so far. For this reason, the prevalent tautomeric form of ammeline in the solid remained unknown to this date. In the course of this study, its crystal structure was finally established by single-crystal X-ray diffraction. In this structure, ammeline is exclusively found as its 4,6-diamino-1,3,5-triazin-2(1H)-one tautomer and adopts layered structure with an exceptionally high hydrogen bond density. Ammeline shows an interesting amphoteric behavior. Therefore, the synthesis and structural characterization of some of its salts were carried out to investigate the influence of the protonation degree on its molecular structure. In particular, the crystal structure of silver ammelinate monohydrate was solved as the first reported structure containing deprotonated ammeline. Moreover, the crystal structures of three different modifications of ammelinium perchlorate were elucidated and the transformation conditions between them were studied. Lastly, the crystal structure of ammelinediium diperchlorate monohydrate, containing unprecedented doubly protonated ammeline, was determined. The products' thermal behavior was studied by differential thermal analysis and thermogravimetric analysis. The perchlorate salts were additionally examined for their potential as insensitive high-energy-density materials.

On Tautomerism and Amphoterism: An In‐Depth Structural and Physicochemical Characterization of Ammeline and Some of Its Salts

AbstractAmmeline is a simple, readily available, molecular compound, which has been known for nearly 200 years. Despite that, no proper structural characterization of ammeline has been conducted so far. For this reason, the prevalent tautomeric form of ammeline in the solid remained unknown to this date. In the course of this study, its crystal structure was finally established by single‐crystal X‐ray diffraction. In this structure, ammeline is exclusively found as its 4,6‐diamino‐1,3,5‐triazin‐2(1H)‐one tautomer and adopts layered structure with an exceptionally high hydrogen bond density. Ammeline shows an interesting amphoteric behavior. Therefore, the synthesis and structural characterization of some of its salts were carried out to investigate the influence of the protonation degree on its molecular structure. In particular, the crystal structure of silver ammelinate monohydrate was solved as the first reported structure containing deprotonated ammeline. Moreover, the crystal structures of three different modifications of ammelinium perchlorate were elucidated and the transformation conditions between them were studied. Lastly, the crystal structure of ammelinediium diperchlorate monohydrate, containing unprecedented doubly protonated ammeline, was determined. The products’ thermal behavior was studied by differential thermal analysis and thermogravimetric analysis. The perchlorate salts were additionally examined for their potential as insensitive high‐energy‐density materials.

The influence of oxychlorine phases on the flash pyrolysis of polycyclic aromatic hydrocarbons and implications for mars

A variety of chlorine-bearing hydrocarbons have been detected in the chemical analyses of soil and rock samples performed on Mars with the GCMS instruments onboard the Viking landers and the SAM instrument suite onboard the Curiosity rover. These aromatic and aliphatic chlorohydrocarbons are most likely produced by chemical reactions between salts (e.g., perchlorates, chlorates) and organic molecules of martian origin either during the thermal processing of the samples in flight or generated through radiation processes happening in Mars’ near surface. To understand the influence of salts on the organic molecules during pyrolysis and identify the potential precursors of the chlorohydrocarbons detected on Mars, we performed a systematic study and pyrolyzed three polycyclic aromatic hydrocarbons (PAHs)—naphthalene, phenanthrene, and benzanthracene—in the presence of six perchlorate and chlorate salts that have been identified or are most likely present on Mars—calcium perchlorate, iron perchlorate, sodium perchlorate, magnesium perchlorate, sodium chlorate, and potassium chlorate. Iron perchlorate had the strongest (oxy)chlorination power on the PAHs of all the salts tested whereas magnesium perchlorate and potassium chlorate were the most destructive ones. Despite the presence of these caustic salts, PAHs were highly chemically and thermally stable, suggesting they would likely be detectable natively if present in a martian sample. In addition, chlorohydrocarbons that are characteristic of the parent PAH were formed and could be used to help identify the nature of a PAH. This investigation underlines that PAHs could be the precursors of aromatic chlorohydrocarbons detected on Mars, but a definitive identification will require the detection of the parent PAHs and their respective pyrolyzates, molecules that were not yet detected on Mars likely because of the flight operating constraints of the SAM instrument.

Elaborating NH-Bridged Nitrogen-Rich Energetic Materials via Base-Mediated Dimroth Rearrangement: Synthesis, Characterization, and Performance Study.

The pursuit of heat-resistant energetic materials featuring high thermostability and energy has gained keen interest in recent years owing to their use in coal mining and aerospace domains. In this study, we synthesized 4-((4,6-diamino-1,3,5-triazin-2-yl) amino)-1H-1,2,3-triazole-5-carbonitrile (6) and its perchlorate and nitrate energetic salts (6a and 6b) by incorporating amino bridging (-NH-) using the Dimroth rearrangement (DR) from inexpensive starting materials as a heat-resistant energetic materials. All of the compounds were thoroughly characterized by infrared (IR), NMR, elemental analysis (EA), high-resolution mass spectrometry (HRMS), and thermogravimetric analysis-differential scanning calorimetry (TGA-DSC) studies. Compounds 6a and 6b showed good densities (1.81 and 1.80 g cm-3), detonation performance (VOD = 7505 and 8257 m s-1, DP = 23.47 and 24.41 GPa), insensitivity to mechanical stimuli (IS = 40 J and FS = >360 N), and excellent thermal stability (Td = 307 and 334 °C), surpassing presently used heat-resistant explosive HNS (318 °C). The molecular electrostatic potentials and noncovalent interactions were pursued to understand possible interaction sites and structure-directing interactions in these salts. Their facile synthetic approach, good energetic performance, and outstanding thermal stability indicate that they are the ideal combination for replacing current benchmark heat-resistant explosive HNS. Additionally, this study highlights the use of classical DR for making new energetic materials with fine-tuned properties.

Preservation of Bacillus subtilis' cellular liquid state at deep sub-zero temperatures in perchlorate brines.

Although a low temperature limit for life has not been established, it is thought that there exists a physical limit imposed by the onset of intracellular vitrification, typically occurring at ~-20 °C for unicellular organisms. Here, we show, through differential scanning calorimetry, that molar concentrations of magnesium perchlorate can depress the intracellular vitrification point of Bacillus subtilis cells to temperatures much lower than those previously reported. At 2.5 M Mg(ClO4)2, the peak vitrification temperature was lowered to -83 °C. Our results show that inorganic eutectic salts can in principle maintain liquid water in cells at much lower temperatures than those previously claimed as a lower limit to life, raising the prospects of active biochemical processes in low temperature natural settings. Our results may have implications for the habitability of Mars, where perchlorate salts are pervasive and potentially other terrestrial and extraterrestrial, cryosphere environments.

Further Insight into the Manganese(II) 2,2′-Bipyridine-1,1′-dioxide Homoleptic Complex: Single-Crystal X-ray Structure Determination of the Perchlorate Salt and DFT Calculations

The homoleptic cationic complex formed by reacting suitable manganese(II) salts with 2,2′-bipyridine-1,1′-dioxide (bipyO2) has been subjected to several studies in the past because of its peculiar absorption and electrochemical features. Here, the first single-crystal X-ray structure determination of a [Mn(bipyO2)3]2+ salt is reported, where the charge of the cation is balanced by perchlorate anions. The hydrated salt [Mn(bipyO2)3](ClO4)2 crystallizes in the monoclinic system (P21/n space group) and the asymmetric unit contains three cationic complexes and six perchlorate anions. The environment of the manganese(II) ions is best described as octahedral, with scarce variations among the three cations in the asymmetric unit. The bipyO2 ligands exhibit κ2 coordination mode, forming seven-membered metallacycles. The X-ray outcomes have been used as the starting point for DFT and TDDFT calculations, aimed to elucidate the charge transfer origin of the noticeable absorption in the visible range. The MLCT nature is confirmed by the hole and electron distributions associated with the spin-allowed transitions. DFT calculations on the related manganese(III) complex indicate that the geometry of [Mn(bipyO2)3]2+ changes only slightly upon oxidation, in agreement with the reversible electrochemical behaviour experimentally observed.

Metal-Solvent Complex Formation at the Surface of InP Colloidal Quantum Dots.

The surface chemistry of colloidal semiconductor nanocrystals (QDs) profoundly influences their physical and chemical attributes. The insulating organic shell ensuring colloidal stability impedes charge transfer, thus limiting optoelectronic applications. Exchanging these ligands with shorter inorganic ones enhances charge mobility and stability, which is pivotal for using these materials as active layers for LEDs, photodetectors, and transistors. Among those, InP QDs also serve as a model for surface chemistry investigations. This study focuses on group III metal salts as inorganic ligands for InP QDs. We explored the ligand exchange mechanism when metal halide, nitrate, and perchlorate salts of group III (Al, In Ga), common Lewis acids, are used as ligands for the conductive inks. Moreover, we compared the exchange mechanism for two starting model systems: InP QDs capped with myristate and oleylamine as X- and L-type native organic ligands, respectively. We found that all metal halide, nitrate, and perchlorate salts dissolved in polar solvents (such as n-methylformamide, dimethylformamide, dimethyl sulfoxide, H2O) with various polarity formed metal-solvent complex cations [M(Solvent)6]3+ (e.g., [Al(MFA)6]3+, [Ga(MFA)6]3+, [In(MFA)6]3+), which passivated the surface of InP QDs after the removal of the initial organic ligand. All metal halide capped InP/[M(Solvent)6]3+ QDs show excellent colloidal stability in polar solvents with high dielectric constant even after 6 months in concentrations up to 74 mg/mL. Our findings demonstrate the dominance of dissociation-complexation mechanisms in polar solvents, ensuring colloidal stability. This comprehensive understanding of InP QD surface chemistry paves the way for exploring more complex QD systems such as InAs and InSb QDs.

Unexpected formation of FeIIFeIIIFeII- and FeIIFeIIFeII-trinuclear hexapyridineoximate helicates: synchrotron single-crystal X-ray structures

Template condensation of 2-acetylpyridineoxime with butyl ester of 1,3-propanediboronic acid in the presence of iron(II) affords a poorly separable mixture of complex products. Similar results were observed when Fe3+ ions were used for cross-linking in place of the diboronic acid. Prolonged crystallization of these mixtures gave crystals of perchlorate salts of a FeIIFeIIIFeII-trinuclear hexapyridineoximate cation and of an analogous FeIIFeIIFeII-intracomplex that crystallize with chloroform and dichloromethane solvent molecules, respectively. Both complexes were characterized by synchrotron single-crystal X-ray diffraction (XRD) experiments. The Fe–N distances of the two ‘terminal’ iron cations are virtually the same between these trinuclear complexes and unambiguously support assignments of oxidation number +2 and low-spin state (S = 0). The centers of the FeN6 -coordination polyhedra adopt geometries resembling trigonal antiprisms with distortion angles φ of approximately 40°. The FeO6 -coordination polyhedra possess an almost ideal Oh geometry with φ close to 60°. Each of these iron(II) or iron(III) µ3 -metallocenters acts as a bifunctional Lewis acid that cross-links two pseudoclathrochelate entities, formed by the ‘terminal’ iron(II) ions, to give an almost linear (the corresponding intramolecular Fe(2)…Fe(1)…Fe(3) angles are close to 180°) helical cation or intracomplex.

Synthesis and Properties of Polyvinylidene Fluoride-Hexafluoropropylene Copolymer/Li6PS5Cl Gel Composite Electrolyte for Lithium Solid-State Batteries.

Gel electrolytes for lithium-ion batteries continue to replace the organic liquid electrolytes in conventional batteries due to their advantages of being less prone to leakage and non-explosive and possessing a high modulus of elasticity. However, the development of gel electrolytes has been hindered by their generally low ionic conductivity at room temperature and high interfacial impedance with electrodes. In this paper, a poly (vinylidene fluoride)-hexafluoropropylene copolymer (PVdF-HFP) with a flexible structure, Li6PS5Cl (LPSCl) powder of the sulfur-silver-germanium ore type, and lithium perchlorate salt (LiClO4) were prepared into sulfide gel composite electrolyte films (GCEs) via a thermosetting process. The experimental results showed that the gel composite electrolyte with 1% LPSCl in the PVdF-HFP matrix exhibited an ionic conductivity as high as 1.27 × 10-3 S·cm-1 at 25 °C and a lithium ion transference number of 0.63. The assembled LiFePO4||GCEs||Li batteries have excellent rate (130 mAh·g-1 at 1 C and 54 mAh·g-1 at 5 C) and cycling (capacity retention was 93% after 100 cycles at 0.1 C and 80% after 150 cycles at 0.2 C) performance. This work provides new methods and strategies for the design and fabrication of solid-state batteries with high ionic conductivity and high specific energy.

Long-Term Survivability of Tardigrade Paramacrobiotus experimentalis (Eutardigrada) at Increased Magnesium Perchlorate Levels: Implications for Astrobiological Research.

Perchlorate salts, including magnesium perchlorate, are highly toxic compounds that occur on Mars at levels far surpassing those on Earth and pose a significant challenge to the survival of life on this planet. Tardigrades are commonly known for their extraordinary resistance to extreme environmental conditions and are considered model organisms for space and astrobiological research. However, their long-term tolerance to perchlorate salts has not been the subject of any previous studies. Therefore, the present study aimed to assess whether the tardigrade species Paramacrobiotus experimentalis can survive and grow in an environment contaminated with high levels of magnesium perchlorates (0.25-1.0%, 1.5-6.0 mM ClO4- ions). The survival rate of tardigrades decreased with an increase in the concentration of the perchlorate solutions and varied from 83.3% (0.10% concentration) to 20.8% (0.25% concentration) over the course of 56 days of exposure. Tardigrades exposed to 0.15-0.25% magnesium perchlorate revealed significantly decreased body length. Our study indicates that tardigrades can survive and grow in relatively high concentrations of magnesium perchlorates, largely exceeding perchlorate levels observed naturally on Earth, indicating their potential use in Martian experiments.