PEG Block Copolymers Research Articles

Features of Interaction of Lysozyme with PGLU–PEG Block Copolymers

Features of Interaction of Lysozyme with PGLU–PEG Block Copolymers

Statistical Copolymers that Mimic Aspects of Mussel Adhesive Proteins: Access to Robust Adhesive-Domains for Non-Covalent Surface PEGylation.

Reconstructing functional sequence motifs of proteins, using statistical copolymers greatly reduces the information content, but simplifies synthesis significantly. Key amino acid residues involved in the adhesion of mussel foot proteins are identified. The side-chain functionalities of Dopa, lysine, and arginine are abstracted and incorporated into acrylate monomers to allow controlled radical polymerization. The resulting Dopa-acrylate (Y*-acr), arginine-acrylate (R-acr), and lysine-acrylate (K-acr) monomers are polymerized in different monomer ratios and compositions by reversible addition fragmentation transfer polymerization with a poly(ethylene glycol) (PEG) macrochain transfer agent. This results in two sets of PEG-block-copolymers with statistical mixtures and different monomer ratios of catechol/primary amine and catechol/guanidine side-chain functionalities, both important pairs for mimicking π-cation interactions. The coating behavior of these PEG-block-copolymers is evaluated using quartz crystal microbalance with dissipation energy monitoring (QCM-D), leading to non-covalent PEGylation of the substrates with clear compositional optima in the coating stability and antifouling properties. The coatings prevent non-reversible albumin or serum adsorption, as well as reduce cellular adhesion and fungal spore attachment.

Water-soluble PEG segmented mannose-based macromolecules: Synthesis, characterization and their biocompatibility

The macromolecular architectures, namely mannose-based methacrylate acetyl-mannopyranoside and PEG block copolymers [AB type copolymer [PEG-b-PMAM], poly(ethyleneglycol)-b-poly(methacryl-2,3,4,6-tetra-O-acetyl-D-mannopyranoside) and ABA type copolymer [PMAM-b-PEG-b-PMAM], poly(methacryl-2,3,4,6-tetra-O-acetyl-D-mannopyranoside)-b-poly(ethyleneglycol)-b-poly(methacryl-2,3,4,6-tetra-O-acetyl-D-mannopyranoside)] were synthesized by atom transfer radical polymerization (ATRP) method that were deacetylated to generate the corresponding water-soluble and biocompatible glycopolymer macromolecules. The molecular weight of acetyl and deacetylate macromolecules was in the range of 7083–9499 and 4659–6026, as determined by GPC and proton NMR spectra. The 5 % decomposition temperatures for acetylated methacrylate macromolecules (218–299 °C) were higher than the corresponding water-soluble macromolecules (204–248 °C). The conjugation of poly(methacryl-2,3,4,6-tetra-O-acetyl-D-mannopyranoside) (PMAM) segment with the PEG block decreased the glass transition (Tg) value, and the water-soluble macromolecules displayed Tg in the range of 92–95 °C. The biocompatibility of the synthesized water-soluble mannose-based macromolecules was determined using Human Bone Derived Cells (HBDC) culture with the TCP (Tissue culture plastic) template as control. Using three different concentrations of the synthesized glycopolymers, HBDC's were cultured for 1, 3, and 7 days. The effect of mannomethacrylate macromolecules on mitochondrial activity of HBDC's was estimated using colorimetry that showed the conversion of MTS [3-(4,5-dimethyl-thiazol-2-yl)-2,5-diphenyl-tetrazolium-bromide] to formazan (MTS assay). ABA type diblock copolymer architecture exhibited increased absorbance values of 3 and 7 day cultures at 1–100 M concentrations, with the highest values observed at a concentration of 1 M for day 3 cultures. The design of these novel mannose-based macromolecules is important for improving cell proliferation, cell adhesion, and osteointegration efficiency.

A systematic study on the effects of the structure of block copolymers of PEG and poly(ε-caprolactone-co-glycolic acid) on their temperature-responsive sol-to-gel transition behavior

The effects of the molecular structure on the temperature-responsive sol-to-gel transition behavior and neat morphology of the block copolymers of poly(ethylene glycol) and poly(ε-caprolactone-co-glycolic acid) were systematically investigated.

Engineering endosomolytic nanocarriers of diverse morphologies using confined impingement jet mixing.

The clinical translation of many biomolecular therapeutics has been hindered by undesirable pharmacokinetic (PK) properties, inadequate membrane permeability, poor endosomal escape and cytosolic delivery, and/or susceptibility to degradation. Overcoming these challenges merits the development of nanoscale drug carriers (nanocarriers) to improve the delivery of therapeutic cargo. Herein, we implement a flash nanoprecipitation (FNP) approach to produce nanocarriers of diverse vesicular morphologies by using various molecular weight PEG-bl-DEAEMA-co-BMA (PEG-DB) polymers. We demonstrated that FNP can produce uniform (PDI < 0.1) particles after 5 impingements, and that by varying the copolymer hydrophilic mass fraction, FNP enables access to a diverse variety of nanoarchitectures including micelles, unilamellar vesicles (polymersomes), and multi-compartment vesicles (MCVs). We synthesized a library of 2 kDa PEG block copolymers, with DEAEMA-co-BMA second block molecular weights of 3, 6, 12, 15, 20, and 30 kDa. All formulations were both pH responsive, endosomolytic, and capable of loading and cytosolically delivering small negatively charged molecules - albeit to different degrees. Using a B16.F10 melanoma model, we showcased the therapeutic potential of a lead FNP formulated PEG-DB nanocarrier, encapsulating the cyclic dinucleotide (CDN) cGAMP to activate the stimulator of interferon genes (STING) pathway in a therapeutically relevant context. Collectively, these data demonstrate that an FNP process can be used to formulate pH-responsive nanocarriers of diverse morphologies using a PEG-DB polymer system. As FNP is an industrially scalable process, these data address the critical translational challenge of producing PEG-DB nanoparticles at scale. Furthermore, the diverse morphologies produced may specialize in the delivery of distinct biomolecular cargos for other therapeutic applications, implicating the therapeutic potential of this platform in an array of disease applications.

PDMS-PEG Block Copolymer and Pretreatment for Arresting Drug Absorption in Microphysiological Devices.

Poly(dimethylsiloxane) (PDMS) is a commonly used polymer in organ-on-a-chip devices and microphysiological systems. However, due to its hydrophobicity and permeability, it absorbs drug compounds, preventing accurate drug screening applications. Here, we developed an effective and facile method to prevent the absorption of drugs by utilizing a PDMS-PEG block copolymer additive and drug pretreatment. First, we incorporated a PDMS-PEG block copolymer into PDMS to address its inherent hydrophobicity. Next, we addressed the permeability of PDMS by eliminating the concentration gradient via pretreatment of the PDMS with the drug prior to experimentally testing drug absorption. The combined use of a PDMS-PEG block copolymer with drug pretreatment resulted in a mean reduction of drug absorption by 91.6% in the optimal condition. Finally, we demonstrated that the proposed method can be applied to prevent drug absorption in a PDMS-based cardiac microphysiological system, enabling more accurate drug studies.

Surface mechanical behavior of water-spread poly(styrene)–poly(ethylene glycol) (PS–PEG) micelles at the air–water interface: Effect of micelle size and polymer end/linking group chemistry

Hypothesis:The surface mechanical properties of poly(styrene)-poly(ethylene glycol) (PS–PEG) micelles are influenced by the PEG corona structure. Changes in micelle aggregation number as well as changes in the PEG end group and linking group chemistry of the PS–PEG block copolymer are expected to alter PEG corona characteristics and therefore affect surface mechanical properties of the resulting micelle film. Experiments:Different sized micelles comprised of PS–PEG block copolymer chains were formulated by equilibrating micelles in different ratios of acetone/water mixtures and subsequently removing acetone using dialysis. Additionally, micelles of a similar size and PS–PEG molecular weight but slightly different chemistry were formulated. The micelles were characterized using dynamic light scattering (DLS), transmission electron microscopy (TEM), 1H NMR, surface pressure–area isotherms and Brewster angle microscopy (BAM). Findings:The reduction in micelle aggregation number results in the subsequent monolayer having higher compressibility moduli and bending stiffnesses and collapsing at lower surface pressures. Micelle hydrophobicity was shown to improve readsorption of micelles to interface after collapse. Analysis of Brewster angle microscopy images of out-of-plane wrinkle structures which formed upon monolayer collapse indicates the presence of continuous 1 nm thick PEG layer which allows micelle monolayers to bend under high compression.

Counterion-insulated near-infrared dyes in biodegradable polymer nanoparticles for in vivo imaging.

Polymeric nanoparticles (NPs) are highly attractive for biomedical applications due to their potential biodegradability and capacity to encapsulate different loads, notably drugs and contrast agents. For in vivo optical bioimaging, NPs should operate in the near-infrared region (NIR) and exhibit stealth properties. In the present work, we applied the approach of ionic dye insulation with bulky hydrophobic counterions for encapsulation of near-infrared cyanine dyes (Cy5.5 and Cy7 bearing two octadecyl chains) into biodegradable polymer (PLGA) NPs. We found that at high dye loading (20–50 mM with respect to the polymer), the bulkiest fluorinated tetraphenylborate counterion minimized best the aggregation-caused quenching and improved fluorescence quantum yields of both NIR dyes, especially of Cy5.5. In addition, bulky counterions also enabled formation of small 40 nm polymeric NPs in contrast to smaller counterions. To provide them stealth properties, we prepared 40 nm dye-loaded PEGylated NPs through nanoprecipitation of synthetic PLGA–PEG block copolymer with the dye/counterion salt. The obtained NIR NPs loaded with Cy5.5 dye salt allowed in vivo imaging of wild-type mice with a good contrast after IV injection. Compared to the bare PLGA NPs, PLGA–PEG NPs exhibited significantly slower accumulation in the liver. Biodistribution studies confirmed the preferential accumulation in the liver, although PLGA and PLGA–PEG NPs could also be distributed in other organs, with the following tendency: liver > spleen > lungs > kidney > heart > testis > brain. Overall, the present work validated the counterion approach for encapsulation of NIR cyanine dyes into biodegradable polymer NPs bearing covalently attached PEG shell. Thus, we propose a simple and robust methodology for preparation of NIR fluorescent biodegradable polymer NPs, which could further improve the existing optical imaging for biomedical applications.

Poly(ethylene glycol)s With a Single Cinnamaldehyde Acetal Unit for Fabricating Acid-Degradable Hydrogel.

A synthetic route to prepare a poly(ethylene glycol) with a single cinnamaldehyde acetal unit in the polymer chain, was successfully established using a newly synthesized cinnamaldehyde acetal diethylene glycol (CADEG) as initiator. This HO-PEG(ca)-OH is non-toxic and would be degraded into a cinnamaldehyde and two PEG diols in acid environment. A whole polyethylene glycol based hydrogel was easily fabricated by thiol-ene “click” reaction in alkalescence aqueous solution using acrylate-PEG(ca)-acrylate and 4-arm PEG-SH as raw materials at room temperature. The gel time was dependent on the pH of the solution and its alkalinity can promote gel. The hydrogel can be degradable in acidic conditions and the stronger the acidity, the faster the degradation. This HO-PEG(ca)-OH also can be used in synthesis of cinnamaldehyde containing PEG derivatives, block copolymers or other acid degradable materials.

Photothermally enhanced photodynamic therapy based on glutathione-responsive pheophorbide a-conjugated gold nanorod formulations for cancer theranostic applications

Nanocarriers have provided a new platform for the selective delivery of therapeutic agents into targeted cells and tissues using safe, efficient, and tractable routes. In particular, the integration of multiple therapeutic/diagnostic modalities into a single system has the great potential of enhancing theranostic efficiency against serious diseases with reduced side effects. In this study, a new light-triggered theranostic system using photosensitizer-conjugated gold nanorods (AuNR) with glutathione (GSH)-sensitive linkages was developed for cancer imaging and combinational phototherapy of photodynamic therapy (PDT) and photothermal therapy (PTT) to achieve a synergistic cancer treatment. AuNRs with various aspect ratios were prepared as photothermal agents, and then a folic acid (FA)-PEG block copolymer (FAP) and pheophorbide a (Pheo) were chemically conjugated to the surface of AuNRs for active tumor targeting and PDT, respectively. The configuration of Pheo-conjugated AuNR nanocarriers has been precisely controlled through adjusting the feed composition ratio and the relationship between aspect ratio and absorption band of AuNRs. In particular, an AuNR with an aspect ratio of 3.84 and longitudinal plasmon resonance at 873nm (Pheo-conjugated AuNR100) exhibited superior performance in singlet oxygen generation, photothermal conversion effect, and GSH-mediated selective release of Pheo. Moreover, it also showed tumor targeting activity and a PDT-PTT synergistic effect. These results indicate that this multifunctional AuNR system with tumor targeting ability and GSH-sensitive linkages would be highly efficient for noninvasive cancer treatment by integrating cancer imaging diagnostics and synergistic therapy.

Poly(ethylene glycol)-poly(propylene glycol)-poly(ethylene glycol) and polyvinylidene fluoride blend doped with oxydianiline-based thiourea derivatives as a novel and modest gel electrolyte system for dye-sensitized solar cell applications.

Unique symmetrical thiourea derivatives with an oxydianiline core were synthesized using cost-effective and simple methods. A new gel electrolyte system was prepared using these thiourea additives along with a highly conductive PEG–PPG–PEG block copolymer, PVDF, and an iodide/triiodide redox couple. The PEG units present in the electrolyte are well-known for their intense segmental motion of ions, which can degrade the recombination rate and favour the charge transfer. The thiourea additives interacted well with the redox couple to limit iodine sublimation and their adsorption induced a negative potential shift for TiO2. The highest efficiency attained by utilizing such gel polymer electrolytes was 5.75%, especially with 1,1′-(oxybis(4,1-phenylene))bis(3-(6-methylpyridin-2-yl) thiourea) (OPPT), under an irradiation of 100 mW cm−2. The electrochemical impedance spectroscopy, UV-vis absorption spectroscopy, differential scanning calorimetry, and FTIR spectroscopy data of such gel polymer electrolytes favoured the PCE order of the additives used in DSSCs. The improvement in the DSSC performance with symmetrical thioureas having electron-rich atoms was practically attributed to the reduction of back electron transfer, dye regeneration, and hole transport.

Polycation–PEG Block Copolymer Undergoes Stepwise Phase Separation in Aqueous Triflate Solution

A block copolymer poly(ethylene glycol)-b-poly(vinylbenzyltrimethylammonium triflate), PEG–PVBTMA-OTf, and a homopolymer PVBTMA-OTf were synthesized through RAFT reactions. The polymers were studied in aqueous triflate solutions with varying temperatures, changing also the polymer and salt concentrations. The hydrophobic triflate anion turns polycations thermoresponsive, and they show an UCST. In the block copolymer, the interaction between the PEG and the cationic block makes the phase separation occur in distinct steps. Upon cooling, transparent solutions first turn turbid and then partially clear at TcL. The TcL is not observed in a mixed solution of PVBTMA-OTf and PEG macro-CTA. By considering the interplay between ionic, hydrogen bonding, and hydrophobic interactions, an overall picture of the complex phase separation processes is suggested.

Amphiphilic Ferrocene-Containing PEG Block Copolymers as Micellar Nanocarriers and Smart Surfactants.

An important and usually the only function of most surfactants in heterophase systems is stabilizing one phase in another, for example, droplets or particles in water. Surfactants with additional chemical or physical handles are promising in controlling the colloidal properties by external stimuli. The redox stimulus is an attractive feature; however, to date only a few ionic redox-responsive surfactants have been reported. Herein, the first nonionic and noncytotoxic ferrocene-containing block copolymers are prepared, carrying a hydrophilic poly(ethylene glycol) (PEG) chain and multiple ferrocenes in the hydrophobic segment. These amphiphiles were studied as redox-sensitive surfactants that destabilize particles as obtained in miniemulsion polymerization. Because of the nonionic nature of such PEG-based copolymers, they can stabilize nanoparticles even after the addition of ions, whereas particles stabilized with ionic surfactants would be destabilized by the addition of salt. The redox-active surfactants were prepared by the anionic ring-opening polymerization of ferrocenyl glycidyl ether, with PEG monomethyl ether as the macroinitiator. The resultant block copolymers with molecular weights (Mn) between 3600 and 8600 g mol-1 and narrow molecular weight distributions (Mw/Mn = 1.04-1.10) were investigated via 1H nuclear magnetic resonance and diffusion ordered spectroscopy, size exclusion chromatography, and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. Furthermore, the block copolymers were used as building blocks for redox-responsive micelles and as redox-responsive surfactants in radical polymerization in miniemulsion to stabilize model polystyrene nanoparticles. Oxidation of iron to the ferrocenium species converted the amphiphilic block copolymers into double hydrophilic macromolecules, which led to the destabilization of the nanoparticles. This destabilization of nanoparticle dispersions may be useful for the formation of coatings and the recovery of surfactants.

Doxorubicin-loaded micelles based on multiarm star-shaped PLGA-PEG block copolymers: influence of arm numbers on drug delivery.

Star-shaped block copolymers based on poly(D,L-lactide-co-glycolide) (PLGA) and poly(ethylene glycol) (PEG) (st-PLGA-PEG) were synthesized with structural variation on arm numbers in order to investigate the relationship between the arm numbers of st-PLGA-PEG copolymers and their micelle properties. st-PLGA-PEG copolymers with arm numbers 3, 4 and 6 were synthesized by using different cores such as trimethylolpropane, pentaerythritol and dipentaerythritol, and were characterized by nuclear magnetic resonance and gel permeation chromatography. The critical micelle concentration decreased with increasing arm numbers in st-PLGA-PEG copolymers. The doxorubicin-loaded st-PLGA-PEG micelles were prepared by a modified nanoprecipitation method. Micellar properties such as particle size, drug loading content and in vitro drug release behavior were investigated as a function of the number of arms and compared with each other. The doxorubicin-loaded 4-arm PLGA-PEG micelles were found to have the highest cellular uptake efficiency and cytotoxicity compared with 3-arm PLGA-PEG micelles and 6-arm PLGA-PEG micelles. The results suggest that structural tailoring of arm numbers from st-PLGA-PEG copolymers could provide a new strategy for designing drug carriers of high efficiency. Structural tailoring of arm numbers from star shaped-PLGA-PEG copolymers (3-arm/4-arm/6-arm-PLGA-PEG) could provide a new strategy for designing drug carriers of high efficiency.

Fluorescent microspheres of poly(ethylene glycol)–poly(lactic acid)–fluorescein copolymers synthesized by Ugi four‐component condensation

ABSTRACTMicroparticles formed by poly(lactic acid) (PLA) and poly(ethylene glycol) (PEG) diblock copolymers containing fluorescein grafted to the polymer chain were synthesized by a Ugi four‐component condensation (UFCC) reaction. To synthesize these copolymers, lactide was first polymerized by a ring‐opening polymerization with alcohol initiators containing functional groups to give carboxyl‐ and aldehyde‐end‐functionalized PLA. Two different fluorescent block copolymers (FCPs) of PEG–PLA conjugated to fluorescein (FCP 1 and FCP 2) were then synthesized by UFCC; they gave yields in the range 65–75%. These copolymers were characterized well according their chemical structures and thermal properties, and we prepared fluorescent microspheres (FMSs) from them with the single emulsion–solvent evaporation method (FMS 1 and FMS 2). A new application of UFCC in the preparation of biomasked drug‐delivery systems is proposed. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 42994.

Pheophorbide a-Conjugated pH-Sensitive Nanoparticle Vectors for Highly Efficient Photodynamic Therapy of Cancer

To achieve a tumor-targeted drug delivery system for photodynamic therapy, we designed ligand-mediated nanoparticles with stable formulations of a hydrophobic photosensitizer. Folic acid (FA)-conjugated amphiphilic block copolymers of PEG and poly-β-benzyl-L-aspartate with the potential to act as pH-sensitive drug release reservoirs were synthesized. The photosensitizer was conjugated to the copolymers through pH-sensitive hydrazone (Hyd) linkages. The FA-PEG-P(Asp-Hyd)-Pheo nanoparticles had average diameters of 76–217 nm. The pH-dependent photosensitizer release property may ensure intracellular drug release inside tumor cells due to the lower pH inside the endosomes and lysosomes of tumor cells. The FA-PEG-P(Asp-Hyd)-Pheo nanoparticles demonstrated marked phototoxicity and minimal dark toxicity.

In situ gelling polyvalerolactone-based thermosensitive hydrogel for sustained drug delivery

Biodegradable poly(ethyleneglycol)–poly(valerolactone)–poly(ethyleneglycol) [PEG–PVL–PEG] copolymers were synthesized through ring opening polymerization of δ-valerolactone (VL) followed by the coupling of monomethoxy poly(ethyleneglycol–poly(valerolactone) (mPEG–PVL) with hexamethylene diisocyanate (HDI). The copolymers were characterized by 1H NMR, FT-IR, and GPC. Block copolymers of PEG and PVL with different VL/PEG molar ratios were successfully synthesized. One of the copolymers (Copolymer 2, PEG550–PVL6768–PEG550) displayed a sol–gel transition at a physiological temperature based on the test tube inverting method and rheological studies. The thermogelling copolymer demonstrated a characteristic crystalline peak for PVL block as determined by DSC and XRD analysis. In vitro release from the copolymer hydrogel matrix indicated that dexamethasone (DEX), a hydrophobic model drug, released comparatively slower than 5-fluoruracil (5-FU), a hydrophilic model drug, due to the potential partitioning of DEX into the PVL core. 5-FU in vitro release from copolymer 2 was 86% in 22h, whereas only 14% of DEX was released in 24h. Cell viability studies confirmed that hydrogels composed of block copolymers are biocompatible. Copolymer 2 showed more than 80% relative cell viability at all concentrations, including concentrations greater than 200 fold CMC. In vivo gel formation studies indicate that gel integrity was maintained for 7days upon subcutaneous injection into mice. These results indicate that PEG–PVL–PEG copolymers are suitable for drug delivery applications.

Nanoparticles Based on a Hydrophilic Polyester with a Sheddable PEG Coating for Protein Delivery

To investigate the effect of polyethylene glycol (PEG) in nanoparticles based on blends of hydroxylated aliphatic polyester, poly(D,L-lactic-co-glycolic-co-hydroxymethyl glycolic acid) (PLGHMGA) and PEG-PLGHMGA block copolymers on their degradation and release behavior. Protein-loaded nanoparticles were prepared with blends of varying ratios of PEG-PLGHMGA (molecular weight of PEG 2,000 and 5,000Da) and PLGHMGA, by a double emulsion method with or without using poly(vinyl alcohol) (PVA) as surfactant. Bovine serum albumin and lysozyme were used as model proteins. PEGylated particles prepared without PVA had a zeta potential ranging from ~ -3 to ~-35mV and size ranging from ~200 to ~600nm that were significantly dependent on the content and type of PEG-block copolymer. The encapsulation efficiency of the two proteins however was very low (<30%) and the particles rapidly released their content in a few days. In contrast, all formulations prepared with PVA showed almost similar particle properties (size: ~250nm, zeta potential: ~-1mV), while loading efficiency for both model proteins was rather high (80-90%). Unexpectedly, independent of the type of formulation, the nanoparticles had nearly the same release and degradation characteristics. NMR analysis showed almost a complete removal of PEG in 5days which explains these marginal differences. Protein release and particle degradation are not substantially influenced by the content of PEG, likely because of the fast shedding of the PEG blocks. These PEG shedding particles are interesting system for intracellular delivery of drugs.

Hairy fluorescent nanoparticles from one‐pot click chemistry and atom transfer radical emulsion polymerization

AbstractWell‐defined hairy and crosslinked fluorescent nanoparticles with diameters in the range 70–220 nm were obtained from simultaneous copper‐catalyzed alkyne–azide cycloaddition (CuAAC) and atom transfer radical emulsion polymerization (ATREP) of a mixture of styrene, divinylbenzene, 4‐vinylbenzylazide and 7‐propinyloxycoumarin (Cr), using bromide‐terminated poly(ethylene glycol) (PEG) as macroinitiator, Tween‐20 as emulsifier, copper(I) bromide as catalyst and pentamethyldiethylenetriamine as ligand. The generation of biocompatible PEG brushes and the introduction of fluorescent functionalities as well as crosslinking of nanoparticles were realized in one step. In order to verify that functionalization and propagation of polymer chains could be realized in a controlled manner by one‐pot simultaneous ATREP and CuAAC, linear block copolymers of PEG and polystyrene (PS) with partially clicked pendent Cr groups (PEG‐b‐(PS‐c‐Cr)) were synthesized. All prepared PEG‐b‐(PS‐c‐Cr) copolymers had a controlled molecular weight and defined molecular structure. The hairy fluorescent nanoparticles exhibit a low cytotoxicity and could find applications in cell labeling. © 2013 Society of Chemical Industry

In Vitro Apoptosis Enhancement of Hep-G2 Cells by PLA–TPGS and PLA–PEG Block Copolymer Encapsulated Curcumin Nanoparticles

Abstract Nanodrug systems containing curcumin (Cur) encapsulated with the block copolymers poly(lactide)-d-α-tocopheryl poly(ethylene glycol) 1000 succinate (PLA–TPGS) and poly(lactide)–poly(ethylene glycol) (PLA–PEG) have been prepared and characterized by infrared and fluorescence spectroscopy, field-emission scanning electron microscopy (FE-SEM), and dynamic light scattering (DLS). Upon encapsulation, the highest solubility of Cur–PLA–TPGS and Cur–PLA–PGE dried powder was calculated as high as 2.40 and 2.20 mg mL−1, respectively, an increase of about 350-fold compared to that of Cur (6.79 µg mL−1). The antitumor assays (cytotoxic and antitumor-promoting assays) on Hep-G2 cellsof copolymer-encapsulated Cur nanoparticles showed the apoptotic activity due to the remarkable changes in size, morphology, and angiogenesis ability of tumor cells in all cases of the tested samples as compared with the control.