We have determined the properties of plasma around and between two exploding wires using high-resolution x-ray absorption spectroscopy. Plasma densities and temperatures ranging from ≳0.1g/cm3 and a few eV to less than 0.01 g/cm3 and 30 eV have been measured in experiments at Cornell University with two 40 μm aluminum (Al) wires spaced 1 mm apart driven by ∼150 kA peak current pulses with 100 ns rise time. The wire plasma was backlit by the 1.4–1.6 keV continuum radiation produced by a Mo wire X-pinch. The spectrometer employed two spherically bent quartz crystals to record the absorption and backlighter spectra simultaneously. The transition between the dense Al wire core and the coronal plasma is seen as a transition from cold K-edge absorption to Mg-, Na-, and finally Ne-like absorption at the boundary. In the plasma that accumulates between the wires, ionization states up to C-Like Al are observed. The spectrometer geometry and ∼2μm X-pinch source size provide 0.3 eV spectral resolution and 20 μm spatial resolution enabling us to see 1s → 2p satellite transitions as separate lines as well as O-, F-, and Ne-like 1s → 3p transitions that have not been seen before. A step wedge was used to calibrate the transmission, enabling density to be measured within a factor of two and temperature to be measured within ±25%. A genetic algorithm was developed to fit synthetic spectra calculated using the collisional-radiative code SCRAM to the experimental spectra. In order to obtain agreement it was necessary to assume multiple plasma regions with variable thicknesses, thereby allowing the inferred plasma conditions to vary along the absorption path.