System Of PDEs Research Articles

Developing PDE-constrained optimal control of multicomponent contamination flows in porous media

This paper develops a robust and efficient PDE-constrained optimal control model for multicomponent pollutions in porous media, which takes into account nonlinear multi-component contamination flows of groundwater. The objective of the pollution optimal control is to identify the optimal injection rates from the top part boundary of domain, which can minimize the least squares error between the concentrations that are simulated and the allowable observed concentrations at observation sites, combining with the affection of costs associated with reducing emissions at injection locations. To discrete the constrained governing system of nonlinear multi-component flows, the splitting improved upwind finite difference scheme is developed for multicomponent PDEs system involving nonlinear chemical reactions of multicomponent pollutants and the pollutant injected rates on the upper part boundary. We employ the differential evolution (DE) optimization algorithm to solve the optimization. We numerically demonstrate the effectiveness of our model by analyzing the flow simulation on a simple geometric aquifer and identifying the optimal injection rates by minimizing the concentration derivation and the abatement costs. We also investigate the simulation of the contamination flow in a more realistic-shaped aquifer, which further validates our model's robustness and efficacy. The developed PDE-constrained control model and algorithm can be applied to applications of groundwater pollution control.

Paradigm on Levenberg–Marquardt neural algorithm analysis of heat conduction optimization for ternary hybrid nanofluid with entropy generation

AbstractThe significance of the present article is to enhance the thermal management and energy efficiency of complex engineering infrastructures such as energy storage systems, modern electric vehicles, thermal insulations, heavy‐duty machinery, and production units. This research aims to understand the intricate relationship between the thermal conductivity performance of ternary () hybrid nanomaterial and entropy generation to optimize material design and efficacy. A synergetic combination of three distinct nanomaterials silicon dioxide, ferric oxide, and titanium oxide with ethylene glycol and water in the ratio 3:2 as a base solvent is comprised of contributing unique thermophysical properties. To elucidate the impact of this hybrid composition on thermal conductivity, various factors are analyzed. The advanced computational technique of Artificial intelligent feed‐forward neural network (AIFFNN) is utilized. The problem governed the system of PDEs, which is transformed into ODEs by dimensionless similarity. Adams method provided the dataset which is filtered and embedded into Marquardt–Levenberg Algorithm (LMA). The study examines the role of nanomaterial constituents, morphology, and boundary conditions on thermal performance and entropy generation. Graphical analysis of velocity, temperature, and entropy is provided with respect to varying parameters, including surface absorption (λ), magnetic strength (Tesla M), radiation parameter (Rd), Brownian motion (Br), and Eckert number (Ec). The findings have practical significance for optimizing material design in engineering and industrial applications.

Existence Results of Some Nonlinear Minimization Problems with Application to a System of PDE

A new class of non-self mappings, called proximal condensing operators, is introduced and used to investigate the existence of best proximity points for non-self mappings in reflexive Banach spaces by applying an appropriate measure of noncompactness. In this way, we present generalizations of well-known Schauder and Darbo fixed point problems. We then define the notion of best proximity points for multiplication of two non-self mappings in the setting of Banach algebras and present some sufficient conditions to ensure the existence of such points. Finally, we renorm a Banach space consists of all real valued and continuous functions with two variables to obtain the strict convexity condition and then we survey the existence of an optimal solution for a system of partial differential equations.

Flow and sensitivity analysis of MHD radiative hybrid nanofluid flow across a permeable wedge with slip condition: Response surface methodology

AbstractThis current paper has been written to investigate the effect of a hybrid Tiwari and Das nanofluid model along with optimizing the flow using sensitivity analysis. Heat transfer rates and skin friction assessments were examined with the supplementation of external effects like heat source, thermal radiation, buoyancy forces, velocity slip as well as magnetic effect with spherical‐shaped nanoparticles. The mathematical modeling was formulated using a system of nonlinear PDE. Similarity transformations were implemented in the governing equations for obtaining the final set of nondimensional equations which were then solved using bvp4c code in MATLAB. The results obtained were in close agreement with published results. Some of the significant results obtained included an increase in Nusselt number by 2.26% for an increase in velocity ratio parameter () from to 0.3 along with an increase in skin friction coefficient by 0.77% with magnetic () parameter to . The heat transfer profile was augmented by 0.79% with increasing radiation parameter to while an increase of 18.84% was observed for skin friction profile values recorded for the hybrid model as compared to the base fluid model. Nusselt number reduced by 0.51% for a transition to nanofluid model from regular fluid and by 1.76% for the hybrid model compared to the nanofluid model The unblocked face‐centered central composite design (CCD) was used for analyzing the sensitivity analysis of independent, continuous input parameters on the response parameters, skin friction coefficient, and Nusselt number. The high values for , and , for Nusselt number and skin friction coefficient values, respectively, validate the ANOVA results obtained using response surface methodology (RSM). Only shows positive sensitivity for both the Nusselt number and skin friction responses. The present hybrid nanofluid model finds extensive applications in bio‐toxicity studies, manufacturing of water heaters, and forging of hot exhaust valve heads.

Analytical computation of conditional moments in the extended Cox–Ingersoll–Ross process with regime switching: Hybrid PDE system solutions with financial applications

In this paper, we introduce a novel analytical approach for the computation of the nth conditional moments of an m-state regime-switching extended Cox–Ingersoll–Ross process driven by a continuous-time finite-state irreducible Markov chain. This approach is applicable for all integers n≥1 and m≥1, thereby ensuring wide-ranging utility. The key of our investigation is a complex hybrid system of inter-connected PDEs, derived through a utilization of the Feynman–Kac formula for regime-switching diffusion processes. Our exploration into the solutions of this hybrid PDE system culminates in the derivation of exact closed-form formulas for the conditional moments for diverse values of n and m. Additionally, we study the asymptotic characteristics of the first conditional moments for the 2-state regime-switching Cox–Ingersoll–Ross process, particularly focusing on the effects of the symmetry inherent in the Markov chain’s intensity matrix and the implications of various parameter configurations. Highlighting the practicality of our methodology, we conduct Monte Carlo simulations to not only corroborate the accuracy and computational efficacy of our proposed approach but also to demonstrate its applicability to real-world applications in financial markets. A principal application highlighted in our study is the valuation of VIX futures and VIX options within a dynamic, mean-reverting, hybrid regime-switching framework. This exemplifies the potential of our analytical method to significantly impact contemporary financial modeling and derivative pricing.

Thermal analysis of mathematical model of heat and mass transfer through bioconvective Carreau nanofluid flow over an inclined stretchable cylinder

In this proceeding the main focus to scrutinize the heat and mass transfer rate increment due to the involvement of motile microorganisms in the Carreau nanofluid flow through an inclined stretchable cylinder under the consequences of activation energy and thermal radiation. This phenomenon has many physical applications in the field of civil, mechanical and seismographic engineering. The research focuses on creating and analyzing new nanocomposites with applications in energy storage, showcasing the transformative impact of nanotechnology on the advancement of high-performance materials. First of all, for the numerical treatment of the above physical model mathematical model is developed in the form of partial differential equations (PDE's) by considering all involving quantities. The resultant model is highly nonlinear and of higher order. Appropriate similarity variables are defined to transform this system of PDE's into first order ordinary differential equations (ODE's). For numerical results we develop a numerical algorithm from nonlinear ODE's and use ‘bvp4c’ built in package of MATLAB. Numerical results are acquired from software in the form of graphical visuals and tabular data as narrated in the results and discussion section. Using this tabular data streamlines are constructed for the better understanding of heat and mass transfer through this phenomenon under the defined constraints. From results, velocity profile increased by the augmentation of values of curvature parameter. Thermal profile is stronger when values of thermophoresis parameter is boosted, Concentration of nanoparticle profile get smoother when temperature coefficient increased, and motile microorganism's density profile is enlarged upon inclining the values of bioconvection lewis number.

Novel irreversibility modeling of non-homogeneous charged gas flow by solving Maxwell–Boltzmann PDEs system: irreversibility analysis for multi-component plasma

Novel irreversibility modeling of non-homogeneous charged gas flow by solving Maxwell–Boltzmann PDEs system: irreversibility analysis for multi-component plasma

The group behavior analysis of the high-frequency traders based on Mean Field Games approach

Abstract We present an approach to describe the group behavior of the high-frequency traders in the stock market based on Mean Field Games and optimal control theory. The problem is formalized as a system of coupled PDEs: Kolmogorov–Fokker–Planck, evolving forward in time with initial condition, and Hamilton–Jacobi–Bellman, evolving backwards in time with terminal condition. Under certain assumptions, the system of PDEs can be reduced to Riccati-type ODEs. We solve the inverse problem to describe the behavior of the high-frequency traders during the Chinese stock market crisis in 2015.

Homogenisation of nonlinear Dirichlet problems in randomly perforated domains under minimal assumptions on the size of perforations

AbstractIn this paper we study the convergence of nonlinear Dirichlet problems for systems of variational elliptic PDEs defined on randomly perforated domains of $$\mathbb {R}^n$$ R n . Under the assumption that the perforations are small balls whose centres and radii are generated by a stationary short-range marked point process, we obtain in the critical-scaling limit an averaged nonlinear analogue of the extra term obtained in the classical work of Cioranescu and Murat (Res Notes Math III, 1982). In analogy to the random setting recently introduced by Giunti, Höfer and Velázquez (Commun Part Differ Equ 43(9):1377–1412, 2018) to study the Poisson equation, we only require that the random radii have finite $$(n-q)$$ ( n - q ) -moment, where $$1<q<n$$ 1 < q < n is the growth-exponent of the associated energy functionals. This assumption on the one hand ensures that the expectation of the nonlinear q-capacity of the spherical holes is finite, and hence that the limit problem is well defined. On the other hand, it does not exclude the presence of balls with large radii, that can cluster up. We show however that the critical rescaling of the perforations is sufficient to ensure that no percolating-like structures appear in the limit.

Symmetric structures and dynamic analysis of a (2+1)-dimensional generalized Benny-Luke equation

We study the symmetric structures and dynamic analysis of a (2 + 1)-dimensional generalized Benny-Luke (GBL) equation based on the Lie symmetry method, the GBL equation is an important non-integrable model of water waves. Specifically, we construct multiple exact solutions of the GBL equation and obtain its nonlocally related systems. Firstly, the Lie point symmetries and conservation laws of the GBL equation are computed, and then we get the reduced ordinary differential equation from one of the conservation laws. Multiple methods, for example, the dynamical systems method, the power series method, the homogeneous balancing method and generalized variable separation method, are used to solve the ordinary differential equation and abundant exact solutions of the GBL equation are got. Finally, we extend these exact solutions by discrete symmetries, and give three-dimensional graphs of partial exact solutions. In addition, we construct the nonlocally related PDE systems, which contains the potential systems from the conservation laws and an inverse system from a Lie point symmetry of the GBL equation. These findings reveal the dynamical behavior behind the GBL equation and broaden the range of nonlinear water wave model solutions.

Featuring the stagnation point flow of Casson nanofluid with thermal radiation and swimming microorganisms over a stretching sheet: A computational modeling via analytical method

Here, the investigation examines the flow of a nanomaterial toward stagnation point past stretching sheet having microorganism. The thermal radiative and heat generation have been accounted as well as convective boundary conditions. The influence of thermophoretic and Brownian movment has been considered. It has been proposed that the suitable transformation be utilized in order to convert the system of PDEs into ODEs. The analytical solutions are created through the Homotopy Analysis Method (HAM). The physical parameters with modelled equations have been graphically explained with related physical results. The numeric magnitude of drag friction, heat, mass transport and motile microorganism dendity were also computed and described for numerous emerging parameters. The result shows that the flow decreases with the rinsing value of Casson parameter. The impact of enhancing fluid parameters is too depressed the momentum and thermal boundary layer. The augment in the radiation boost the thermal layer whereas an enlargement in the input of the Lb tends to depreciation the motile density. Validation of the work is existed by validating the current outcomes with previous publishing results. The existing and potential applications of bioconvection have generated a new fascination in the theoretical investigation of the synthesis and process control in biofuel cells and bioreactors.

Observer-based quantized control for networked interconnected PDE systems with actuator failures

This paper proposes an observer-based quantized controller for parabolic partial differential equation systems interconnected by a nonlinear coupling protocol. First, a Markov jump model is introduced to describe various randomly occurring actuator failures, and an observer-based pointwise controller is designed under the averaged measurement scheme. Furthermore, taking into account the limitation of network communication resources, a quantization method is adopted to relieve bandwidth pressure. In addition, stability conditions of the closed-loop system with ℋ∞ disturbance attenuation performance are derived by utilizing appropriate Lyapunov functional and inequality techniques. Ultimately, the proposed method is applied to the Fisher equation to verify its feasibility and effectiveness.

Two-level implicit high-order compact scheme in exponential form for 3D quasi-linear parabolic equations

We discuss a new high accuracy compact exponential scheme of order four in space and two in time to solve the three-dimensional quasi-linear parabolic partial differential equations. The derived half-step discretization based scheme is implicit in nature and demands only two levels for computation. The generalization of the proposed exponential scheme for the system of the quasi-linear parabolic PDEs is also represented. We generate unconditionally stable alternating direction implicit scheme for the linear parabolic equation in general form. The accuracy and the theoretical results of the proposed scheme are verified for high Reynolds number by several numerical problems like linear and non-linear convection-diffusion equation, coupled Burgers' equations, Navier-Stokes equations, quasi-linear parabolic equation, etc.

Exploring the influence of morphology on magnetized Ree–Eyring tri‐hybrid nanofluid flow between orthogonally moving coaxial disks using artificial neural networks with Levenberg–Marquardt scheme

AbstractThe present study presents an analysis of Ree–Eyring tri‐hybrid nanofluid flow between two expanding/contracting disks with permeable walls by applying the computing power of Levenberg–Marquardt supervised neural networks (LM‐SNNs). The effects of thermal radiation, Brownian motion, and thermophoresis were also thoroughly examined. The results are presented for tri‐hybrid nanofluid with SWCNT and MWCNT and Fe2O3 and H2O base fluid. The coupled non‐linear PDE system is transformed into a system of ODE associated with convective boundary conditions by applying the appropriate transformations. This is then accomplished numerically by using the finite difference‐based BVP‐4c MATLAB code that implements the three‐stage Lobatto IIIA formula. The results are novel and have been validated with LM‐SNNs outcomes. It has been observed that both numerical outcomes and LM‐SNNs produce equivalent results, and both approaches exhibit a drop in the velocity profile for the magnetic field near the lower plate and a rise near the upper plate. The skin friction against the Prandtl number increases, whereas the Nusselt number decreases at the upper disc. Compared to BVP‐4c numerical approaches, the given LM‐SNNs model is more dependable, efficient, and time‐saving because it requires less work and produces results quickly.

Well-posedness of an evaporation model for a spherical droplet exposed to an air flow

In this paper, we address the well-posedness of an evaporation model for a spherical liquid droplet taking into account the convective impact of an air flow in the ambient gas phase. From a mathematical perspective, we are dealing with a coupled ODE–PDE system for the droplet radius, the temperature distribution, and the vapor concentration. The nonlinear coupling arises from the evaporation rate modeled by the Hertz–Knudsen equation. Under physically meaningful assumptions, we prove existence and uniqueness of a weak solution until the droplet has evaporated completely. Numerical simulations are performed to illustrate how different air flows affect the evaporation process.

Macro-micro decomposition for consistent and conservative model order reduction of hyperbolic shallow water moment equations: a study using POD-Galerkin and dynamical low-rank approximation

Geophysical flow simulations using hyperbolic shallow water moment equations require an efficient discretization of a potentially large system of PDEs, the so-called moment system. This calls for tailored model order reduction techniques that allow for efficient and accurate simulations while guaranteeing physical properties like mass conservation. In this paper, we develop the first model reduction for the hyperbolic shallow water moment equations and achieve mass conservation. This is accomplished using a macro-micro decomposition of the model into a macroscopic (conservative) part and a microscopic (non-conservative) part with subsequent model reduction using either POD-Galerkin or dynamical low-rank approximation only on the microscopic (non-conservative) part. Numerical experiments showcase the performance of the new model reduction methods including high accuracy and fast computation times together with guaranteed conservation and consistency properties.

Quantized control for interconnected PDE systems via mobile measurement and control strategies

This paper deals with the Rϵ-stabilization for interconnected partial differential equation systems (IPDESs) by mobile measurement and control strategies. First, compared to the static measurement and control strategies, the mobile ones are employed to improve the dynamic response of the closed-loop system, while reducing the number of sensors and actuators effectively. Moreover, considering the constrained transmission channel bandwidth, the hysteresis quantizer with an adjustable parameter is introduced to save the communication resources in the network, while can balance the quantization effect and the control performance by adjusting the parameter. Further, the output quantization controller is designed to ensure that the closed-loop system is Rϵ-stable, which converges to a given interval in finite time. Finally, a simulation example of chemical non-isothermal tubular reactors is provided to illustrate the validity of the presented design method.

Nonlinear systems of PDEs admitting infinite‐dimensional Lie algebras and their connection with Ricci flows

Nonlinear systems of PDEs admitting infinite‐dimensional Lie algebras and their connection with Ricci flows

Thermal analysis on Ferro Casson nanofluid flow over a Riga plate with thermal radiation and non-uniform heat source/sink

Ferro hybrid nanofluids can be used in electronics and microelectronics cooling applications to reduce heat accumulation and efficiently remove surplus heat. These nanofluids aid to maintain optimum operating temperatures and reduce device overheating by enhancing the heat transfer rate. With this motivation, the aim of the present numerical analysis is to study the three-dimensional incompressible hybrid nanofluid flow over a slippery Riga surface by combining the Casson fluid model. Mathematical modeling is constructed with nanoparticles as Fe3O4 and CoFe2O4 with base fluid as water. The non-uniform heat source/sink and thermal linear radiation effects are taken into account with the Hamilton–Crosser thermal conductivity model. A system of nonlinear PDEs is produced by the proposed problem and then the relevant similarity variables are implemented to transform the set of partial differential equations and their accompanying boundary conditions into the coupled nonlinear differential equations with one independent variable. These modified ordinary differential equations (ODEs) were then successfully solved with the Runge–Kutta fourth-order method by combining via the shooting technique. With the aid of graphical representations, the effects of various influencing parameters were presented and analyzed comprehensively. Furthermore, the impacts of relevant parameters on heat transfer rates and shear stress are concisely discussed and illustrated in tabular forms. The significant findings include the enhancement of the radiation parameter increases the thermal boundary layer thickness and the thickness increases whenever surface experiences slippery conditions. The axial and transverse momentum of the fluid are controlled with the Casson parameter. An effective connection is noticed once the current numerical solutions are verified under particular conditions that were previously described.

Existence of Regular Solutions for a Class of Incompressible Non-Newtonian MHD Equations Coupled to the Heat Equation

We consider a system of PDE’s describing the steady flow of an electrically conducting fluid in the presence of a magnetic field. The system of governing equations composes of the stationary non-Newtonian incompressible MHD equations coupled to the heat equation wherein the influence of buoyancy is taken into account in the momentum equation and the Joule heating and viscous heating terms are included. We proved the existence of C1,γ(Ω¯)×W2,r(Ω)×W2,2(Ω)\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$C^{1,\\gamma }({\\bar{\\Omega }})\ imes W^{2,r}(\\Omega )\ imes W^{2,2}{(\\Omega )}$$\\end{document} solutions of the systems for 1<p<2\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$1< p<2$$\\end{document} corresponding to a small data and we show that this solution is unique in case 6/5<p<2\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$6/5< p < 2$$\\end{document}. Moreover, we also proved the higher regularity properties of this solution.