PCB Pollution Research Articles

Distribution, Sources, and Risk of Polychlorinated Biphenyls in the Largest Irrigation Area in the Yellow River Basin

To investigate the contamination of PCBs in agricultural soils irrigated chronically with polluted water and the distribution and migration of PCBs under long-term irrigation, 100 farmland soil profile samples were collected in the Yellow River irrigation area in Inner Mongolia, China, to determine PCB content. Cluster analysis was used to identify possible sources of PCBs products, and the USEPA Health Risk Evaluation Model assessed the health risks posed by PCBs to humans. The results showed that the detection rates of eight monomers in the different soil layers of each sample site ranged from 5% to 90%, and the concentration ranged from not detected to 87.71 ng·g−1. The PCBs content showed a vertical distribution rule of accumulation in the shallow layer, sudden decrease in the middle layer. Low-chlorinated PCBs were dominant in each soil profile. Source identification indicated that PCB pollution in the study area originated mainly from the Aroclor1242, Aroclor1248, Aroclor1016, Aroclor1232, and Aroclor1221 industrial products and domestic transformer oil. Finally, a health risk assessment demonstrated that child and adult groups in study area were exposed to negligible carcinogenic and noncarcinogenic risks.

Augmentation of an Engineered Bacterial Strain Potentially Improves the Cleanup of PCB Water Pollution.

ABSTRACTPolychlorinated biphenyls (PCBs) are recalcitrant organohalide pollutants, consisting of 209 congeners. PCB cleanup in natural landscapes is expected to be achieved by the metabolic activity of microorganisms, but aerobic PCB-degrading bacteria that inhabit sites polluted by PCBs cannot degrade all PCB congeners due to the specificity of their enzymes. In this study, we investigated the degradability of PCBs when a genetically modified PCB-degrading bacterium was compounded with wild-type PCB-degrading bacteria. We used two bacterial strains, Comamonas testosteroni YAZ2 isolated from a PCB-uncontaminated natural landscape and Escherichia coli BL21(DE3) transformed with a biphenyl dioxygenase (BphA) gene from a well-known PCB degrader, Burkholderia xenovorans LB400. The enzymatic specificities of BphA were 2,3-dioxygenation in the YAZ2 and 2,3- and 3,4-dioxygenations in the recombinant E. coli. For the PCB-degrading experiment, a dedicated bioreactor capable of generating oxygen microbubbles was prototyped and used. The combined cells of the recombinant and the wild-type strains with an appropriate composite ratio degraded 40 mg/L of Kaneclor KC-300 to 0.3 ± 0.1 mg/L within 24 h. All of the health-toxic coplanar PCB congeners in KC-300 were degraded. This study suggested that the augmentation of an engineered bacterial strain could improve the cleanup of PCB water pollution. It also revealed the importance of the ratio of the strains with different PCB-degrading profiles to efficient degradation and that the application of oxygen microbubbles could rapidly accelerate the cleanup.IMPORTANCE PCB cleanup technique in a natural environment relies on the use of enzymes from microorganisms, primarily biphenyl dioxygenase and dehalogenase. Herein, we focused on biphenyl dioxygenase and created a recombinant PCB-degrading E. coli strain. Despite the development of environments for the field use of transgenic microbial strains around the world, verification of the applicability of transgenic microbial strains for PCB cleanup in the field has not yet been reported. We tentatively verified the extent to which degradability could be obtained by an augmentation model of a transgenic strain, the enzyme expression of which is easily regulated in rivers and lakes with PCB pollution. Our experiments used a dedicated bioreactor to model the natural landscape and produced results superior to those of bioremediation or biostimulation methods. The application of micro-nano bubbles, which has recently been discussed, to the cleanup of environmental pollution was also found to be useful in this study.

Organohalogens: A persisting burden in Slovenia?

Persistent organic pollutants (POPs) represent a concern for the environment and human health due to their persistence and toxicity. Exposure in Slovenia is geographically differentiated because the country, as part of former Yugoslavia, has a history of industry and regional contamination and is – at the same time – known for its clean nature. The PCB pollution of the Krupa River drew the public's attention to the chemical burden of Slovenians, and the demand for studies has been rising since. We assessed the exposure of men (n = 548) and primiparous women (n = 536) to POPs in 12 regions of Slovenia as well as exposure pathways via questionnaires. Most PCDD/Fs, PCBs, and PBDEs could be determined in pooled samples of maternal milk at low concentrations (1.57 pg/gTEQ, 1.47 pg/gTEQ, and 1076 pg/g fat, respectively), but a much lower number of compounds could be measured above the LOQ in pooled men's plasma samples (PCDD/Fs 0.08 pg/gTEQ, PCBs 0.007 pg/gTEQ, ΣPBDE 920 pg/g), and only HCB, p,p’-DDE, ΣDDT, and the non-dioxin-like PCB congeners 138, 153, and 180 could be determined in individual samples of milk (concentration range 5–60 ng/g fat). In individual samples of men's serum, only p,p’-DDE and ΣPCB were detected at concentrations of 0.25 ng/g and 0.3 ng/g, respectively. Nonetheless, we were able to differentiate between polluted and unpolluted areas on a national level, with higher exposure levels in the PCB polluted region of Bela Krajina, the industrial region Zasavje, and the capital, Ljubljana. Despite low concentrations, determinants of exposure, such as age, proximity to roads, old building materials, private water supplies, and consumption of alcohol, fish, meat, and eggs that have previously been observed only at higher levels could still be identified. Furthermore, levels of PCBs and PBDEs were highly correlated suggesting common exposure sources and pathways, whereas PCDD/Fs were correlated to a lesser extent. The calculated ratio between DDT and DDE in maternal milk samples was decreasing with the year of sampling, suggesting no ongoing exposure to DDT. The study findings suggest low exposure of men and lactating women to legacy pollutants in Slovenia, which gave rise to the hypothesis that Slovenia's geographical location might provide shelter from the long-range transport of POPs via Westerly winds. This hypothesis remains to be confirmed within future studies.

Supporting evidence for PCB pollution threatening global killer whale population

A recent Science report predicted the global killer whale population to collapse due to PCB pollution. Here we present empirical evidence, which supports and extends the reports’ statement. In 2016, a neonate male killer whale stranded on the German island of Sylt. Neonatal attributes indicated an age of at least 3 days. The stomach contained ∼20 mL milk residue and no pathologies explaining the cause of death could be detected. Blubber samples presenting low lipid concentrations were analysed for persistent organic pollutants. Skin samples were collected for genotyping of the mitochondrial control region. The blubber PCB concentrations were very high [SPCBs, 225 mg/kg lipid weight (lw)], largely exceeding the PCB toxicity thresholds reported for the onset of immunosuppression [9 mg/kg lw ∑PCB] and for severe reproductive impairment [41 mg/kg lw ∑PCB] reported for marine mammals. Additionally, this individual showed equally high concentrations in p,p’-DDE [226 mg/kg lw], PBDEs [5 mg/kg lw] and liver mercury levels [1.1 μg/g dry weight dw]. These results suggest a high placental transfer of pollutants from mother to foetus. Consequently, blubber and plasma PCB concentrations and calf mortality rates are both high in primiparous females. With such high pollutant levels, this neonate had poor prerequisites for survival. The neonate belonged to Ecotype I (generalist feeder) and carried the mitochondrial haplotype 35 present in about 16% of the North Atlantic killer whale from or close to the North Sea. The relevance of this data becomes apparent in the UK West Coast Community, the UK's only residentorca population, which is currently composed of only eight individuals (each four males and females) and no calves have been reported over the last 19 years.Despite worldwide regulations, PCBs persist in the environment and remain a severe concern for killer whale populations, placing calves at high risk due to the mother-offspring PCB-transfer resulting in a high toxicological burden of the neonates.

The spatial distribution of congener-specific human PCB concentrations in a PCB-polluted region

Serum PCB congener concentrations were measured in 602 adults living near a PCB pollution source in eastern Slovakia. We created isoconcentration maps for 21 PCB congeners by geocoding each participant's place of residence and kriging. Concentrations of PCB congeners were inversely associated with the distance of the participants' residence from the source of pollution. Congener-specific risk factors were derived, particularly for PCBs 52 and 153. We observed that the spatial distribution of serum concentrations was influenced by micro-climatic parameters and physicochemical properties of the congeners. PCB congener profiles strongly correlated with that of the PCB commercial product Delor 106, which was manufactured in the region. The isoconcentration maps indicate that the zones with the highest predicted congener concentration have a mean area of approximately 235.75±188.56km2 and the mean enrichment of concentration of congeners in serum in these zones is about 5.12±1.36. We estimate that depending on congener approximately 23,457±18,762 individuals with PCB concentrations exceeding health-based guidance values live in these zones.

Monitoring and Risk Assessment of Selected Pesticide Congeners (PCBs) in Nile River Waters, Egypt

Discharging of higher levels of persistent organic pollutant (POPs) including PCBs to the Nile River waters poses a great environmental impact and human hazardous risk. Therefore, we carried out this study to assess the concentration levels of selected PCB congeners and evaluate their health risk at three different areas along Nile River from South to North of Egypt. Collected samples were extracted and analyzed using (GC-Ms, Agilent). The detected total average concentration levels of selected ten PCB congeners along the three sampling sites Beni-suef (S1), Greater Cairo S2) and Banha (S3) were ranged from 3.89 to 25.5 with an average of 16.51 𝜇g/L, 5.51 to 33.61 with an average of 20.75 𝜇g/L and from 6.14 to with an average of 27.01 𝜇g/L at S1, S2 and S3, respectively. These concentrations were above the acceptable permissible limit set by USEPA for PCBs in drinking water (0.5 𝜇g/L), indicating an important PCB pollution problem in the Nile River water and high possibility of human adverse health effects. Therefore, counter measures and laws enforcement should be applied to minimize the risk of PCBs in the Egyptian environment.

Assessing PCB pollution in the Baltic Sea - An equilibrium partitioning based study

Sediment cores and bottom water samples from across the Baltic Sea region were analyzed for freely dissolved concentrations (Cfree), total sediment concentrations (CT) and the dissolved aqueous fraction in water of seven indicator PCBs. Ex-situ equilibrium sampling of sediment samples was conducted with polydimethylsiloxane (PDMS) coated glass fibers that were analyzed by automated thermal desorption GC-MS, which yielded PCB concentrations in the fiber coating (CPDMS). Measurements of CPDMS and CT were then applied to determine (i) spatially resolved freely dissolved PCB concentrations; (ii) baseline toxicity potential based on chemical activities (a); (iii) site specific mixture compositions; (iv) diffusion gradients at the sediment water interface and within the sediment cores; and (vi) site specific distribution ratios (KD). The contamination levels were low in the Gulf of Finland and moderate to elevated in the Baltic Proper, with the highest levels observed in the western Baltic Sea. The SPME method has been demonstrated to be an appropriate and sensitive tool for area surveys presenting new opportunities to study the in-situ distribution and thermodynamics of hydrophobic organic chemicals at trace levels in marine environments.

Nano-occurrence and removal of PCBs within the Europe's largest petrochemical MBR system

The occurrence of 45 PCBs was studied in a wastewater treatment plant (WWTP), which treats industrial wastewater from the zone of Porto Marghera (Venice, Italy) in an MBR, and in the Naviglio del Brenta River, which serves as a source of process water supply for this industrial zone. The focus of the study was placed on the comparison of levels of contamination of the WWTP effluent and the river water by selected PCBs in order to understand the major source of PCB pollution for the Lagoon of Venice and contrast them with the current legislation. Out of 45, 31 PCBs were detected in the WWTP at total median PCB concentration of 5.5 ng/L with a predominant presence of six indicator – PCBs (PCB 28, 52, 101, 138, 153 and 180), which accounted for 50–55% of total PCBs in both wastewater and sludge samples. The total PCB concentration was reduced by around 90% during the applied wastewater treatment to a median concentration of 0.5 ng/L at the WWTP effluent. In the samples collected from the river, 27 PCBs were detected at total median concentration of 2.1 ng/L, which is few times higher than the total PCB concentration found in the WWTP effluent. This result suggests that the current legislative limitations applied to the WWTPs effluent discharges into the Lagoon of Venice, regarding the presence of PCBs (i.e. absent) is rather arbitrary given the higher concentration levels encountered in river water than in the WWTP effluent of the studied industrial WWTP.

Swimming upstream: probing the problem of pollution.

Swimming upstream: probing the problem of pollution.

Assessment of DDT, HCH and PCB pollution of lake sediments in Poland

Abstract In the years 2010-2013, 528 samples of surface sediments were collected from lake depths in the area of Poland. The content of 7 PCB congeners, HCH isomers and p,p’-DDT, p,p’-DDE and p,p’-DDD was determined using the GC-ECD method. The studies showed the common occurrence of organochlorine compounds in lake sediments in Poland. The presence of HCHs, at a concentration above the determination limit, was detected in 83.71% of samples, that of DDTs in 98.86% of samples, and of PCBs in 98.86% of samples. The maximum HCH concentration was 60.7 ng g-1, that of DDTs 602.9 ng g-1, and of PCBs 50.7 ng g-1, while the averages were 6.3 ng g-1, 19.2 ng g-1 and 2.8 ng g-1, respectively. High levels of DDTs are found in sediments of those lakes upon which major towns are located, whereas the highest HCH concentrations are observed in sediments of the lakes upon which holiday centres and agrotourism facilities have developed. The ratio of concentrations of total DDT metabolites to p,p’-DDT was above 2 in almost all samples, and the value was most frequently from several to tens (average 28.3). Sediments of some lakes contain higher concentrations of γ-HCH and DDT metabolites than their PEC values, the content of γ-HCH was higher in 1.89% of the analysed samples, the content of p,p’-DDE in 3.78% of the samples, and the content of p,p’-DDD in 7.38% of the samples. Concentrations of p,p’-DDT and PCB in excess of the PEC value were not found in any of the samples tested.

Influence of Heavy Metals and PCBs Pollution on the Enzyme Activity and Microbial Community of Paddy Soils around an E-Waste Recycling Workshop

Due to the emerging environmental issues related to e-waste there is concern about the quality of paddy soils near e-waste workshops. The levels of heavy metals and PCBs and their influence on the enzyme activity and microbial community of paddy soils obtained from the immediate vicinity of an e-waste workshop were investigated in the present study. The results indicated that the heavy metal and PCB pollution did not differ significantly with an increase of the sampling point distances (5 to 30 m). The concentration of Cd (2.16 mg·kg−1) and Cu (69.2 mg·kg−1) were higher, and the PCB pollution was also serious, ranging from 4.9 to 21.6 μg·kg−1. The highest enzyme activity was found for urease compared to phosphatase and catalase, and a fluctuating trend in soil enzyme activity was observed in soils from different sampling sites. The microbial analysis revealed that there was no apparent correlation between the microbial community and the pollutants. However, a slight influence for soil microbial communities could be found based on DGGE, the Shannon index and PCA analysis. The present study suggests that the contamination stress of heavy metals and PCBs might have a slight influence on microbial activity in paddy soils. This study provides the baseline data for enzyme activities and microbial communities in paddy soil under the influence of mixed contamination.

The effect of mangrove reforestation on the accumulation of PCBs in sediment from different habitats in Guangdong, China

To investigate the influence of mangrove reforestation on the accumulation of PCBs, the concentrations and homologue patterns of polychlorinated biphenyls in surface sediments from different mangrove forests and their adjacent mud flats in Guangdong Province were determined. The total PCB concentrations in the sediments ranged from 3.03 to 46.62ngg−1 (dry weight). Differences in the accumulation and distribution of PCBs were found between the mangrove sites and the mud flats. Furthermore, the natural forests and restored mangrove forests of native species showed slight PCB contamination, whereas the exotic species Sonneratia apetala exacerbated the PCB pollution at certain sites. It was suggested that the native mangrove species Kandelia candel and Aegiceras corniculatum could represent good choices for the phytoremediation of PCB contamination.

PCB pollution and macromolecular damage in Cyprinus carpio in Buyuk Menderes River: From ecotoxicology to risk assessment

PCB pollution and macromolecular damage in Cyprinus carpio in Buyuk Menderes River: From ecotoxicology to risk assessment

Daphnia response to biotic stress is modified by PCBs

The aim of this study was to examine the influence of xenobiotics (PCBs) on the responses of Daphnia to biotic factors such as the presence of a predator (fish kairomone) or filamentous cyanobacteria. Both behaviour (depth selection) and life history (body size at first reproduction and fecundity) were affected by these stressors. Though there was no direct effect of PCBs, their influence resulted in disruption of the “natural” reaction to the presence of fish or cyanobacteria, leading to inadequate responses of Daphnia to these biotic threats. Examined clones of Daphnia showed significant diversity in their reaction to these stress factors, which was greater than that between Daphnia clones exposed to different environmental conditions. PCB pollution may change the frequency of Daphnia clones in favour of those whose responses to biotic stress are similar in both the absence and presence of these toxic chemicals.

Distribution of persistent organochlorine pollutants in maternal and foetal tissues: Data from an Italian polluted urban area

This study was designed to evaluate both levels and distributions of organochlorine pollutants in placenta and other maternal–foetal tissues, from women resident in an Italian highly industrialized urban area with demonstrated PCB pollution. To this end, 30 polychlorinated biphenyl congeners (PCBs), p,p′-dichlorodiphenyltrichloroethane (p,p′-DDT), p,p′-dichlorodiphenyldichloroethylene (p,p′-DDE) and hexachlorobenzene (HCB), were determined in placenta, both maternal and cord blood serum and adipose tissue of Caucasian pregnant women ( n = 70) undergoing to programmed caesarean delivery. Median placental concentrations of PCBs, p,p′-DDE and HCB (0.89 ng g −1, 0.63 ng g −1 and 0.19 ng g −1 on wet tissue weight basis, respectively), were lower than previously published data. p,p′-DDT could be detected in most of adipose tissue samples, but very rarely in the other compartments. Distributions of investigated compounds in biological matrices showed significant relationships, confirming their transplacental transfer. It is worthy of note that HCB tended to be transferred more easily from maternal to foetal tissues. Maternal serum levels of these pollutants can allow a reliable estimation of organochlorine compound body burden, and can be useful markers of prenatal exposure, given their relationships with placental and umbilical cord serum levels.

Prediction of the PCB pollution in the soils of Bursa, an industrial city in Turkey

The purpose of this study was to predict the equilibrium soil concentrations and distributions of Σ 41Polychlorinated Biphenyl (PCB) congeners from the air data measured at 4 sites (urban, suburban, residential, and industrial) in Bursa between 2004 and 2005. The soil–air partition coefficient ( K SA) was used for the predictions. Predicted soil concentrations ranged from 25 pg/g to 690 pg/g, while the atmospheric concentrations fluctuated between 35 pg/m 3 and 1112 pg/m 3. The soil concentrations were found to be in agreement with the lower range of European and global values, and below the regulatory limits. The urban and residential sites yielded higher PCB concentrations and a higher degree of heavier congeners than the sites characterized as suburban. The urban and residential sites were dominated by hexa-chlorinated biphenyls (CBs), followed by tri-CBs, while the industrial site was dominated by tri-CBs, followed by tetra-CBs. PCB congeners of 153, 180, 138, 118, and 101 were higher in all locations. The effect of the temperature changes on the concentrations was found to be insignificant, as the correlations ranged between 0.0009 and 0.22 for all sites. The K SA approach yielded reasonable results, and it is recommended to use this approach when there is limited data about the pollution levels of a certain media such as soil by using the measured levels of the other media such as air.

PCB pollution of early milk in the Province of Vojvodina

Seven EPA PCB congeners (28, 52, 101, 118, 138, 153, and 180) were determined in samples of early human milk collected from 18 mothers in Novi Sad, using GC-ECD (HP 5890) supplied with a Quadra fused silica column 5% Ph for PCBs. The sum of seven PCB congeners was 3.26 ± 3.90 ( X ¯ ± S.D. ), median 1.25, range 0.4–14.31 and the range of individual congeners was for: 28: 0.04–0.37; 52: 0.04–0.44, 101: 0.04–1.21; 118: 0.05–0.62; 138: 0.13–4.61; 153: 0.13–4.81; 180: 0.10–3.07, ng/g wet. No correlation was found between maternal age and seven PCB congeners. In two primiparous mothers below 30 years, the sum of seven PCB congeners was three to fourfold, and in one multiparous twofold higher than the average for the group. Unchanged level of assumed total PCBs in early human milk in 2003, compared with measured total PCBs in 1993, suggest the continuous inlet of these chemicals into the environment.

PCBs and its coupling with eco-environments in Southern Yellow Sea surface sediments

In this paper, the spatial distribution and source of the PCBs in surface sediments of the Southern Yellow Sea (SYS) and influencing factors, such as the sediment characteristics (components, relative proportions and total organic carbon contents), and hydrodynamic conditions were analyzed. PCB concentrations in the surface sediments ranged from 518–5848 pg/g, with average values of 1715 pg/g decreasing sharply compared to last year. In the study area, the PCB pollution level in the middle area was the highest, followed by that of the east coast and the west coast, respectively. Although the PCB level in the coastal areas was lower than that in the middle areas, it was proven in our study that the Yellow Sea obtained PCBs by virtue of river inputs. There was a positive and pertinent correlation between the clay proportion and PCB concentrations, and the increase of the PCB concentrations was directly proportional to the increase of TOC contents, with r = 0.61, but it was contrary to the sediment grain size. Consequently, the factors controlling PCB distribution had direct or indirect relationships with sediment grain size; moreover, the hydrodynamic conditions determined the sediment components and grain size. In conclusion, hydrodynamic conditions of the Yellow Sea were the most important influencing factors effecting the distribution of PCBs in the surface sediments of the SYS.

Evaluation of Noninvasive Approach for Monitoring PCB Pollution of Seabirds Using Preen Gland Oil

Oil secreted from the preen gland (located at the base of the tail feathers) of seabirds can be collected from live birds. We determined PCB concentrations and profiles in the preen gland oil and corresponding abdominal adipose tissue collected from 30 seabirds (2 orders, 3 families, 10 genera, 13 species) to examine the utility of the oil as a monitoring medium. Samples were collected from seabirds that had died in traffic accidents or had become caught unintentionally in experimental drift nets and long-lines in the North Pacific Ocean. Significant concentrations of PCBs were detected in all oil samples, with a concentration range of 9-4834 ng/g-lipid and a geometric mean of 404 ng/ g-lipid. PCBs in the oil had more lower-chlorinated congeners than those in corresponding abdominal adipose, suggesting that they had less opportunity to undergo metabolism before they were secreted from the gland. We observed a weak but significant correlation between the PCB concentrations in the oil and abdominal adipose tissue (R2 = 0.19, P < 0.05). Correcting for the metabolic loss of PCBs on the basis of congener profiles improved the correlation (R2 = 0.48, P < 0.001), implying that congener-specific determination of PCBs in the preen gland oil enables us to estimate PCB concentrations in the abdominal adipose within 1 order of magnitude difference. The differences in PCB concentrations among the 13 species are discussed in terms of dietary behavior, habitat, and migration.

Determination of PCDDs, PCDFs, PCBs and HCB emissions from the metallurgical sector in Poland

The aim of the project was to measure the actual emissions of PCDD/F, PCBs and HCB from 20 selected metallurgical installations in Poland, in order to update the national inventory of dioxin emission from metallurgical industry for developing a strategy for dioxins and furans emission abatement from the subject facilities (UNEP 2005). Sampling methodology used in this work was developed at the Cracow University of Technology because of the complexity of simultaneous sampling and determining PCDFs, PCDDs, PCB and HCB. For the determination a GC-MS/MS system was used. Results from the work indicate that the highest dioxins and PCB concentrations were recorded for iron ore sintering plants at 1.10-1.32 ng total1 TEQ/Nm3 followed by aluminium scrap melting at 0.03-0.66 ng total TEQ/Nm3. The highest HCB concentrations at 613-1491 ng/Nm3 were also recorded fo iron ore sintering plants, whereas at aluminium plants the HCB concentrations were in the range of only 10.1-22.7 ng/Nm3. The above investigations indicate that secondary aluminium production is the most significant dioxins source, if calculated as emission factor values. However, iron ore sintering plants are operating at much higher production capacity, causing this process to become the major source of dioxins, PCB and HCB pollution to the atmosphere in Poland. Based on the performed tests and the environmental reviews of selected plants several recommendations were formulated for the reduction of generation or of emission of these pollutants from iron ore sintering plants, electric arc furnace steel production processes, hot-blast furnace operations, secondary aluminium smelting and primary zinc production from zinc cathodes.