Path Changes Research Articles

Thermodynamic constitutive model for calcareous sand considering specimen preparation

Specimen preparation methods significantly affect indoor sand soil’s properties. A theoretical model was developed based on granular thermodynamics to describe the undrained shear characteristics of calcareous sand. We validated the model using specimens prepared through four different methods under various relative densities, stress paths, and confining pressures. The hardening index and granular temperature of this model effectively reflect the impact of specimen preparation methods on the strength characteristics of calcareous sand. The model successfully captured these differences in shear behavior resulting from four preparation methods by adjusting the hardening parameters. Furthermore, this model can accurately describe the influence of stress path changes on the mechanical responses of the calcareous sand granular system by incorporating the third elastic strain invariant.

Aerosol-induced closure of marine cloud cells: enhanced effects in the presence of precipitation

Abstract. The Weather Research Forecasting (WRF) version 4.3 model is configured within a Lagrangian framework to quantify the impact of aerosols on evolving cloud fields. Kilometer-scale simulations utilizing meteorological boundary conditions are based on 10 case study days offering diverse meteorology during the Aerosol and Cloud Experiments in the Eastern North Atlantic (ACE-ENA). Measurements from aircraft, the ground-based Atmosphere Radiation Measurement (ARM) site at Graciosa Island in the Azores, and A-Train and geostationary satellites are utilized for validation, demonstrating good agreement with the WRF-simulated cloud and aerosol properties. Higher aerosol concentration leads to suppressed drizzle and increased cloud water content in all case study days. These changes lead to larger radiative cooling rates at cloud top, enhanced vertical velocity variance, and increased vertical and horizontal wind speed near the base of the lower-tropospheric inversion. As a result, marine cloud cell area expands, narrowing the gap between shallow clouds and increasing cloud optical thickness, liquid water content, and the top-of-atmosphere outgoing shortwave flux. While similar aerosol effects are observed in lightly to non-raining clouds, they tend to be smaller by comparison. These simulations show a relationship between cloud cell area expansion and the radiative adjustments caused by liquid water path and cloud fraction changes. The adjustments are positive and scale as 74 % and 51 %, respectively, relative to the Twomey effect. While higher-resolution large-eddy simulations may provide improved representation of cloud-top mixing processes, these results emphasize the importance of addressing mesoscale cloud-state transitions in the quantification of aerosol radiative forcing that cannot be attained from traditional climate models.

Structural insights into the role of deleterious mutations at the dimeric interface of Toll-like receptor interferon-β related adaptor protein.

Toll-like receptors (TLRs) are major players in the innate immune system-recognizing pathogens and differentiating self/non-self components of immunity. These proteins are present either on the plasma membrane or endosome and recognize pathogens at their extracellular domains. They are characterized by a single transmembrane helix and an intracellular toll-interleukin-1 receptor (TIR) domain. Few TIRs directly invoke downstream signaling, while others require other TIR domains of adaptors like TIR domain-containing adaptor-inducing interferon-β (TRIF) and TRIF-related adaptor molecule (TRAM). On recognizing pathogenic lipopolysaccharides, TLR4 dimerises and interacts with the intracellular TRAM dimer through the TIR domain to recruit a downstream signaling adaptor (TRIF). We have performed an in-depth study of the structural effect of two mutations (P116H and C117H) at the dimeric interface of the adaptor TRAM, which are known to abrogate downstream signaling. We modeled the structure and performed molecular dynamics studies in order to decipher the structural basis of this effect. We observed that these mutations led to an increased radius of gyration of the complex and resulted in several changes to the interaction energy values when compared against the wild type (WT) and positive control mutants. We identified highly interacting residues as hubs in the WT dimer, and a few such hubs that were lost in the mutant dimers. Changes in the protein residue path, hampering the information flow between the crucial A86/E87/D88/D89 and T155/S156 sites, were observed for the mutants. Overall, we show that such residue changes can have subtle but long-distance effects, impacting the signaling path allosterically.

High-temperature high cycle fatigue performance of laser powder bed fusion fabricated Hastelloy X: Study into the microstructure and oxidation effects

High-temperature fatigue properties are critical for laser powder bed fusion (LPBF) fabricated Nickel-based superalloy Hastelloy-X (HX) used in aero engines. In this study, superior high-temperature high-cycle fatigue properties of LPBF HX were achieved. The detailed investigations show that the grain boundary oxidation promoted by the different deformation modes between neighboring grains, despite the reduced oxygen-related damage in the coarser LPBF HX microstructures, are the potential causes for the inter-granular fatigue crack initiation and the subsequent crack coalescence. In the meantime, the crack propagation could be hindered by the refined carbides and annealing twins with Σ3 misorientation (60°/〈111〉) in LPBF HX. Furthermore, the recrystallized grains formed ahead of the crack tip due to the severe deformation within the plastic zone and high testing temperature have different crystallographic orientations, which leads to the crack propagation path changes and increases the fatigue crack propagation resistance.

Simultaneous measurement of thickness and group refractive index in birefringent crystals

In order to measure the group refractive index and thickness of birefringent crystals simultaneously, a method based on spectral-domain interferometry is proposed. The optical path of each reflection layer of birefringent crystal is converted into spectral interference fringe of corresponding frequency by the principle of spectral-domain interferometry, and the accurate optical path calculation is realized by fast Fourier transform and Hanning-windowed energy centrobaric method. A two-step measurement method was designed to measure the crystal thickness and group refractive index of ordinary ( o ) and extraordinary ( e ) light synchronously by comparing the changes of the optical path before and after the insertion of the sample. The comparison between experimental and theoretical results of LiNbO3 crystals shows that the accuracy of the thickness measured by this system is better than 1 μm and the relative error of the group refractive index is better than 0.15%. The measurement method is simple to implement and has high precision, which is of practical significance for realizing the rapid and high-precision measurement of optical parameters of birefringent crystals.

Characterisation and modelling of anisotropic hardening behaviour of cubic and hexagonal close packed polycrystalline metals

ABSTRACT In this study, anisotropic non-proportional hardening behaviour of the sheet metals with different crystalline structures is investigated. The investigated materials particularly exhibit the Bauschinger effect and complex transient hardening behaviour during loading path change. Furthermore, the finite element simulations are carried out to evaluate the performance of the distortional and multi-surface-kinematic hardening models in flow stress prediction under loading path change. Both models can well reproduce the measured anisotropic hardening, but the distortional hardening concept shows better predictive capability for flow stresses. The improved accuracy of the flow stress prediction with the distortional hardening model compared to the kinematic hardening is attributed to its flexibility in distortion of the yield surface following microstructure deviator independent on the initial yield surface. In contrast, the initial size of the yield surface in the kinematic hardening significantly affects the determination of the re-yielding stress at load reversal.

Effect of DC poling on transparency and photoluminescence in Pr:PMN-PT transparent ceramics

Electric poling could significantly influence the transparency and the photoluminescence (PL) intensities in transparent ferroelectric PL ceramics. This work applied direct current (DC) poling on a highly transparent 0.75PMN-0.25PT:0.015Pr3+ ceramic, observed the domain configurations in a direction perpendicular to poling direction. Lamellar domains perpendicular to electric field were observed after poling and decreased the transmittance by changing the propagation path of incident light. Besides, the enhancement of PL intensities by poling was found as high as 62 %, mainly due to the following reasons: the change of light propagation path by the lamellar domains is supposed to increase the absorption of exciting light; and the reduced crystal symmetry may increase the PL efficiency. This work revealed the effects of DC poling on transparency and PL properties in transparent ferroelectric PL ceramics.

Modeling Bauschinger effect through the reversibility of dislocation slip in an Al–Cu–Li alloy

Al–Cu–Li alloys are promising lightweight materials for extensive applications in aerospace. As aerospace components often experience strain path changes during service, understanding the resulting Bauschinger effect is crucial for optimizing the fatigue resistance and performance of these alloys. This study investigates the role of T1 precipitates in the Bauschinger effect in AA2099. The presence of shearable T1 precipitates has been found to significantly influence the Bauschinger effect by reducing the strengthening effect of T1 precipitates during reverse straining. An analytical expression for slip reversibility has been derived to quantify this phenomenon, and a microstructure-based constitutive model has been developed to accurately predict the Bauschinger effect in AA2099.

Comparison of homogeneous anisotropic hardening models in the case of the direct redrawing of a DP600 steel

The use of DP600, an advanced high strength steel, has gained significant attention in automotive industry, especially for complex structures that require multi-step forming operations, leading to non-linear strain path changes. From a numerical modelling perspective, the use of advanced constitutive equations has enabled a precise representation of a large range of behaviors, encompassing reverse and orthogonal strain path changes. Within this context, this study is dedicated to the numerical simulation of a two-step deep drawing process based on distortional plasticity. Two models developed within the Homogeneous Anisotropic Hardening (HAH) framework are considered. This study presents a comparison of the model predictions, calibrated over the same experimental database, in terms of their ability to predict the strain path changes and mechanical behavior of the material during the forming process. Several outputs like the punch load evolution and the strain field are compared with experimental data.

Shear band mediated microstructure in an accumulative roll bonded α-brass alloy during strain path changes and annealing

Strain path changes of the accumulative roll bonded 90Cu–10Zn brass and its influence on the shear band structure is the aim of the present study. The effect of post-annealing was also studied in terms of shear bands and texture development. By changing the strain path, the shape of the shear bands has been changed and the material showed two different configurations of shear bands following deformation. Moreover, the XRD-based textural investigations elucidated similarities for the strain paths with similar shear bands. After annealing, a complete restoration occurred for all paths also entailed identical mechanical properties. The development of dual grain size after annealing can also be correlated to the shear band evolution. However, the textural variations for the annealed brass confirmed a textural complexity in shear-banded brass.

方震의 삶과 李舜臣의 관계

This study examines Bang Jin(方震), who was an important helper of Yi Sun-shin(李舜臣) but is not well-known. Bang Jin had his family clan in Onyang Bang and was born in 1514. After growing up in Gyodong Island, he moved to Songsan and settled in Baekamri, Asan following his marriage to a daughter of Hong Yun-pil(洪胤弼). He served as Daejeong Hyeongam(大靜縣監) between 1535 and 1537. It seems that he entered the world of public offices through the Yu-il recommendation system(遺逸薦擧). Later, he passed the military service examination and was appointed as Boseong Gunsu(寶城郡守). His daughter married Yi Sun-Shin in 1565. It was Yi Jun-gyeong(李浚慶) that led a discussion leading to their marriage. He passed the Saengwon examination(生員試) of 1522 along with Bang Guk-hyeong(方國亨), the father of Bang Jin, and Yi Baek-rok(李百祿), the grandfather of Yi Sun-Shin. Bang Jin kept an eye on Yi Sun-Shin who moved from Hanseong and asked Yi Jun-gyeong, one of his father's Dongbangs(同榜), to arrange a match for his daughter. As a result, his daughter married Yi Sun-Shin. Yi Sun-Shin lived at the home of his wife's parents according to the custom of Seoryubuga marriage(婿留婦家婚) and converted his career path from civil service to military service after marriage. In addition to Bang Jin, Bang Woo-ju(方佑周), Bang Hee-min(方希閔), Bang Eung-won(方應元), and Hwang Se-deuk(黃世得) who passed the military service examination were all related to the clan of Onyang Bang. In this sense, the family of his wife had an absolute impact on the career path change of Yi Sun-Shin. Bang Jin, who passed the military service examination, taught books on military science to Yi Sun-Shin as well as martial arts. Moreover, he lavished his economic support on him. As a consequence, Yi Sun-Shin was able to grow into a commander in literary and martial arts and become the hero to led the people to overcome the national crisis during Imjin War.

Analyzing the connectedness among geopolitical risk, traditional energy and carbon markets

This paper studies time-frequency connectedness using the Diebold Yilmaz method and the Baruník and Křehlík method to examine the relationship among geopolitical risk, traditional energy (coal, oil and gas) and carbon markets. First, geopolitical risk shows stable positive net spillovers in the medium and long term, but fluctuates in the short term. Second, the total connectedness is greater in the short term, and strengthened in the period of rising geopolitical risk with the changes of connectedness paths. Third, in general, the carbon market has greater impact on the geopolitical risk than it has been affected. Finally, as a sub-indicator of geopolitical risk index, geopolitical acts index generally contributes more, but natural gas is more affected by geopolitical threats index. Our results provide useful knowledge for governments to realize their goal of policymaking, and help industrial enterprises make timely adjustments to their energy strategies. In addition, we hope that investors can pay attention to the spillover effect and reduce investment risk.

Geometric Control and Structure-at-Infinity Control for Disturbance Rejection and Fault Compensation Regarding Buck Converter-Based LED Driver

Currently, various light-emitting diode (LED) lighting systems are being developed because LEDs are one of the most used lighting sources for work environments, buildings, homes, and public roads in terms of some of their applications. Similarly, they have low energy consumption, quick responses, and excellent optimal performance in their operation. However, these systems still need to precisely regulate lighting, maintain stable voltage and current in the presence of faults and disturbances, and have a wide range of operations in the event of trajectory changes or monitoring tasks regarding the desired voltage and current. This work presents the design and application of two types of robust controllers (structure-at-infinity control and geometric control) applied to an LED driver using a buck converter. The controllers aim to follow the desired trajectories, attenuate disturbances at the power supply input, and compensate for faults in the actuator (MOSFET) to keep the capacitor voltage and inductor current stable. When comparing the results obtained with the two controllers, it was observed that both present excellent performance in the presence of constant disturbances. However, in scenarios in which variable faults and path changes are implemented, the structure-at-infinity control method shows an overimpulse of output voltage and current ranging from 39 to 42 volts and from 0.3 to 0.45 A, with a margin of error of 1%, and it can generate a failure in the LED driver using a buck converter. On the other hand, when using geometric control, the results are satisfactory, achieving attenuating constant disturbances and variable faults, reaching the desired voltage (40 v to 35 v) and current (0.3 to 0.25 A) with a margin of error of 0.05%, guaranteeing a system without overvoltages or the accelerated degradation of the components due to magnetic conductivity.

A Meteorological Drought Migration Model for Assessing the Spatiotemporal Paths of Drought in the Choushui River Alluvial Fan, Taiwan

Understanding drought evolution and its driving factors is crucial for effective water resource management and forecasting. This study enhances the analysis of drought probability by constructing bivariate distributions, providing a more realistic perspective than single-characteristic approaches. Additionally, a meteorological drought migration model is established to explore spatiotemporal paths and related characteristics of major drought events in the Choushui River alluvial fan. The results reveal a significant increase in the probability of southward-moving drought events after 1981. Before 1981, drought paths were diverse, while after 1981, these paths became remarkably similar, following a trajectory from north to south. This is primarily attributed to the higher rainfall in the northern region of the Choushui River alluvial fan from February to April, leading to a consistent southward movement of drought centroids. This study proposes that climate change is a primary factor influencing changes in the spatiotemporal paths of drought. It implies that changes in rainfall patterns and climate conditions can be discerned through the meteorological drought migration model. As a result, it provides the potential for simplifying drought-monitoring methods. These research findings provide further insight into the dynamic process of drought in the Choushui River alluvial fan and serve as valuable references for future water resource management.

A new semi-local centrality for identifying influential nodes based on local average shortest path with extended neighborhood

Quantifying the importance of nodes in complex networks is known as the problem of identifying influential nodes and is considered a critical aspect in interacting with these networks. This problem has many applications such as controlling rumors, sickness spreading, and viral marketing, where its importance has been understood by the research society in the last decade. This paper proposes a new semi-local centrality to identify influential nodes in complex networks based on the theory of Local Average Shortest Path with extended Neighborhood concept (LASPN). LASPN focuses on a distributed technique to extract the subgraph associated with each node and apply the average shortest path theory to it. We use the extended neighborhood concept to find the nearest neighbors of each node with low complexity, where this can lead to high efficiency in dealing with large-scale networks. In addition to applying relative changes in the average shortest path, the proposed metric considers the importance of the node itself as well as its nearest neighbors in ranking the nodes. Evaluation of the proposed centrality metric has been done through numerical simulations on several real-world networks. The results based on Kendall's τ\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\ au$$\\end{document} coefficient under the SIR infection spreading model show that LASPN improves the performance by 2.7% compared to the best available equivalent method.

Wide-Angle Repeat Pass Bistatic SAR Interferometry: A Geometrical Introduction

Positioning a Synthetic Aperture Radar (SAR) receiver at a significant distance from an illuminator in a Low Earth Orbit (LEO) enables wide-angle repeat-pass bistatic interferometry. It’s crucial to define the positioning limits of the receiver with respect to the illuminator to ensure reasonable coherences, altitudes of ambiguity, and a suitable common wavenumber support. I extended the standard monostatic formula, which yields the change in the interferometric travel path due to the vertical baseline. In the wide-angle bistatic case, the range-azimuth coordinate system is no longer orthogonal and we must consider the full 2D vector nature of the LOS orthogonal components. The two vertical baselines and the horizontal baseline of the receiver are needed to parameterize the system. Their impact on the interferometric coherence is quantified and bistatic limits are seen to be more flexible than those in the monostatic case due to the combination of independent baselines. I estimated the coherence, and then extended the analysis to the wavenumber domain, to quantify the common spectral support due to the wavenumber shifts due to the three baselines. The analysis carried out geometrically allows for combining together the effects of the transmitter’s and receiver’s vertical baselines and thus representing the residual spectral fraction with two instead of three parameters. Finally, I examined the achievable spatial resolution of the position of the interferer obtainable from the delay of the arrival of the interference between the illuminator (supposed to be silent) and the receiver.

Study on the evolution of permeability properties of limestone under different stress paths

Abstract Stress path change has a great relationship with the effect of deformation and strength of rock. However, the underground rock body is in the engineering environment where the stress field, seepage field, and other fields are coupled to change, the law of fluid flow in the rock body is complex and variable. The change in the stress field has an important effect on the seepage characteristics of rock body; therefore, it is necessary to study the pattern of rock permeability evolution pattern by different stress paths. This study is based on the study of limestone, conducting triaxial unloading seepage mechanics experiments, the evolution of permeability properties of limestone specimens was analyzed based on the test results. The results show that in the conventional triaxial loading seepage test, the permeability of the limestone decreases before the rock stress reaches the peak intensity and increases after that. Increasing axial pressure unloading surrounding pressure compression section, permeability loss rate and effective stress are in line with the changing law of Gaussian distribution function. Under the action of constant axial pressure unloading surrounding pressure, with the increase in unloading amount, the permeability rate of change appears to increase slowly, and in the late stage of unloading section, the permeability rate of change appears to surge. Unloading section permeability change rate and cumulative unloading amount are in line with the law of change of the exponential function. Creep unloading pressure seepage test found that unloading pressure stage strain-time and permeability-time evolution characteristics are in line with the exponential rule of change. The experimental results of this study can provide an important experimental and theoretical basis for the permeability analysis of low-permeability rock body under complex stress conditions in underground engineering.

Application of distortional plasticity framework to EDDQ and TRIP steel sheets: Prediction of latent hardening and its influence on springback

In this study, the recently developed distortional plasticity model (HAH20) was applied to EDDQ and TRIP steel sheets to account for hardening fluctuations induced by loading path changes. Previous non-linear loading path experiments, which were tension-compression, tension-tension, and tension-shear tests, revealed intricate latent hardening in EDDQ steel and a combination of latent hardening and cross loading contraction in TRIP steel. The HAH20 model was calibrated using tension-compression and 90° tension–45° tension tests with adjustment of setting parameters for accurate latent hardening prediction. Then, a comparison between the HAH20 model and the previous distortional plasticity model (HAH14) in the other independent experiments highlights the superiority of HAH20 model due to its description of latent hardening. Furthermore, for TRIP steel, the HAH20 and HAH14 models were applied to predict springback in a U-draw bending test featuring a novel curved blank subjected to reverse and cross loading states simultaneously. The simulation results show that the HAH20 model predicts springback more accurately than the HAH14 model; however, the main reason is the accurate description of reverse loading in the HAH20 model. This is due to the intricate interplay between cross loading contraction and latent hardening in springback.

Method of settlement calculation for underlying layer of soft soil composite foundation based on load transfer mechanism

The mechanical properties of soil in soft soil area are poor, and the settlement of the underlying layer in the composite foundation accounts for a large proportion of the total settlement. At present, most of the research focuses on the settlement of the reinforced area, and the research on the settlement of the underlying layer is of great significance for the settlement of soft soil composite foundation. The differences in load transfer modes of soil and pile are analyzed, and based on the Boussinesq solution and Mindlin solution, a calculation method for the stress and settlement of the underlying layer in flexible and rigid pile composite foundation is proposed. The relative displacement of soil and pile in flexible pile composite foundation is small, and the negative friction can be ignored, but the influence of effective pile length should be considered. The relative displacement of soil and pile in rigid pile composite foundation is large, so the negative friction should be considered. Part of soil top stress is transmitted to the pile via negative friction, and then the pile axial force is transmitted back to the soil via positive friction. In addition to effective pile length, the change of stress transfer path caused by negative friction should also be considered in settlement calculation.

A physically-based mixed hardening model for the prediction of the ductility limits of thin metal sheets using a CPFE approach

An advanced Crystal Plasticity Finite Element (CPFE) approach is developed to accurately predict the ductility limit strains of thin metal sheets. This method uses polycrystalline unit cells to represent the metal sheets at the macroscopic level. The macroscopic behavior of these unit cells is determined based on that of the constituent single crystals using the periodic homogenization multiscale scheme. At the single crystal scale, the constitutive framework follows a finite strain rate-independent formulation, with the flow rule governed by the Schmid law. The evolution of the single crystal yield surface is described through a physically-based mixed hardening model, where isotropic hardening is characterized by a dislocation density-based formulation, while kinematic hardening is described by the nonlinear Armstrong–Frederick model. The unit cell ductility limit strains are predicted by the Rice bifurcation criterion. The reliability of the mixed hardening model in accurately reproducing mechanical behavior is confirmed through simulations of uniaxial tension/compression loading. Then, the developed computational strategy is used to investigate the impact of key microstructural hardening parameters on the initiation of localized necking under linear strain paths. The numerical predictions reveal the significant influence of these parameters on the formability of thin metal sheets. Additionally, the analysis of ductility limits under non-linear strain paths demonstrates a strong dependency of the numerical predictions on strain path changes. The numerical predictions obtained by the developed CPFE multiscale strategy are compared with experimental results from the literature. In summary, the proposed approach provides a reliable tool for accurately predicting the ductility limits of thin metal sheets, offering valuable insights for engineering applications.