Passive Microwave Observations Research Articles

Microwave radiometry experiment for snow in Altay, China: time series of in situ data for electromagnetic and physical features of snowpack

Abstract. In this paper, we present a comprehensive experiment, namely, an Integrated Microwave Radiometry Campaign for snow (IMCS), in Xinjiang, China, during the snow season of 2015–2016. The campaign hosted a dual-polarized microwave radiometer operating at L, K, and Ka bands to provide minutely passive microwave observations of snow cover at a fixed site, along with daily manual snow pit observations of snow physical parameters, automatic observations of 10 min four-component radiation and layered snow temperatures, and meteorological observations of hourly weather data and soil data. To the best of our knowledge, our dataset is unique in providing continuous daily snow pit data and coincident microwave brightness temperatures, radiation and meteorological data, at a fixed site over a full season, which can be straightforwardly used for evaluation and development of microwave radiative transfer models and snow process models, along with land surface process and hydrology models. The consolidated data are available at (https://doi.org/10.11888/Snow.tpdc.270886) (Dai, 2020).

On the effects of cloud water content on passive microwave snowfall retrievals

The Bayesian passive microwave retrievals of snowfall often rely on mathematical matching of the observed vectors of brightness temperature with an a priori database of precipitation profiles and their corresponding brightness temperatures. Mathematical proximity does not necessarily lead to consistent retrievals due to limited information content of passive microwave observations. This paper defines imposter (genuine) vectors of brightness temperature as those that are mathematically close but physically inconsistent (consistent) and characterizes them through the Silhouette Coefficient (SC) analysis. The Neyman–Pearson (NP) hypothesis testing is used to separate the imposter and genuine brightness temperatures based on their associated values of cloud ice (IWP) and liquid water path (LWP), given by coincidences of CloudSat Profiling Radar (CPR) and the Global Precipitation Measurement (GPM) Microwave Imager (GMI). The study determines thresholds for IWP and LWP that allow optimal identification of imposter brightness temperatures of non-snowing and snowing clouds, which can mislead the passive microwave retrieval algorithms to falsely detect or miss the snowfall events. It is demonstrated that emission signal of supercooled liquid water in snowing clouds can lead to improved passive microwave retrieval of snowfall and conditioning the retrievals to the cloud IWP and LWP can result in marginal correction of the snowfall detection probability; however, reduce the probability of false alarm by 6%–8% over sea ice and open oceans.

Characterizing natural variability in complex hydrological systems using passive microwave-based climate data records: a case study for the Okavango Delta

Abstract. The Okavango River system in southern Africa is known for its strong interannual variability of hydrological conditions. Here, we present how this is exposed in surface soil moisture, land surface temperature, and vegetation optical depth as derived from the Land Parameter Retrieval Model, using an inter-calibrated, long-term, multi-sensor passive microwave satellite data record (1998–2020). We also investigate how these interannual variations relate to state-of-the-art climate reanalysis data from ERA5-Land. We analysed both the upstream river catchment and the Okavango delta, supported by independent data records of discharge measurements, precipitation, and vegetation dynamics observed by optical satellites. The seasonal vegetation optical depth anomalies have a strong correspondence with the MODIS leaf area index (correlation catchment: 0.74, delta: 0.88). Land surface temperature anomalies derived from passive microwave observations match best with those of ERA5-Land (catchment: 0.88, delta: 0.81) as compared to MODIS nighttime land surface temperature (LST) (catchment: 0.70, delta: 0.65). Although surface soil moisture anomalies from passive microwave observations and ERA5-Land correlate reasonably well (catchment: 0.72, delta: 0.69), an in-depth evaluation over the delta uncovered situations where passive microwave satellites record strong fluctuations, while ERA5-Land does not. This is further analysed using information on inundated area, river discharge, and precipitation. The passive microwave soil moisture signal demonstrates a response to both the inundated area and precipitation. ERA5-Land however, which, by default, does not account for any lateral influx from rivers, only shows a response to the precipitation information that is used as forcing. This also causes the reanalysis model to miss record low land surface temperature values as it underestimates the latent heat flux in certain years. These findings demonstrate the complexity of this hydrological system and suggest that future land surface model generations should also include lateral land surface exchange. Also, our study highlights the importance of maintaining and improving climate data records of soil moisture, vegetation, and land surface temperature from passive microwave observations and other observation systems.

Application of a Machine Learning Algorithm in Generating an Evapotranspiration Data Product From Coupled Thermal Infrared and Microwave Satellite Observations.

Land surface evapotranspiration (ET) is one of the main energy sources for atmospheric dynamics and a critical component of the local, regional, and global water cycles. Consequently, accurate measurement or estimation of ET is one of the most active topics in hydro-climatology research. With massive and spatially distributed observational data sets of land surface properties and environmental conditions being collected from the ground, airborne or space-borne platforms daily over the past few decades, many research teams have started to use big data science to advance the ET estimation methods. The Geostationary satellite Evapotranspiration and Drought (GET-D) product system was developed at the National Oceanic and Atmospheric Administration (NOAA) in 2016 to generate daily ET and drought maps operationally. The primary inputs of the current GET-D system are the thermal infrared (TIR) observations from NOAA GOES satellite series. Because of the cloud contamination to the TIR observations, the spatial coverage of the daily GET-D ET product has been severely impacted. Based on the most recent advances, we have tested a machine learning algorithm to estimate all-weather land surface temperature (LST) from TIR and microwave (MW) combined satellite observations. With the regression tree machine learning approach, we can combine the high accuracy and high spatial resolution of GOES TIR data with the better spatial coverage of passive microwave observations and LST simulations from a land surface model (LSM). The regression tree model combines the three LST data sources for both clear and cloudy days, which enables the GET-D system to derive an all-weather ET product. This paper reports how the all-weather LST and ET are generated in the upgraded GET-D system and provides an evaluation of these LST and ET estimates with ground measurements. The results demonstrate that the regression tree machine learning method is feasible and effective for generating daily ET under all weather conditions with satisfactory accuracy from the big volume of satellite observations.

Year-round sea ice and snow characterization from combined passive and active microwave observations and radiative transfer modeling

Satellite microwave observations from 1.4 to 36 GHz already showed sensitivity to several geophysical parameters of sea ice such as Sea Ice Concentration (SIC), Sea Ice Thickness (SIT) or snow depth. The main goal of this article is to provide a realistic and comprehensive characterization of the sea ice and its snow cover that explains the microwave observations during a whole year using a radiative transfer model. For this purpose, we construct a unique dataset of passive microwave observations, to mimic the future Copernicus Imaging Microwave Radiometer (CIMR), along with the active microwave scatterometer data (ASCAT). CIMR database is used to classify sea ice microwave signatures in their spectral dimension with a machine learning technique while ASCAT data are used to help interpret the results of the classification. Classification results are then interpreted with a state-of-art sea ice and Snow Microwave Radiative Transfer model (SMRT) for all highlighted signatures and all seasons. Results make it possible to identify the specific behaviors from the observation co-variabilities for SIC, SIT, and snow structure. Our analysis underlined the role of the depth hoar over multi-year ice, for the interpretation of scattering signals in winter. Scattering signals that appear in late summer are explained by the presence of superimposed ice. This characterization will benefit from future advances in SMRT development, as well as the improved observations of future satellite missions.

Fast Radiative Transfer Approximating Ice Hydrometeor Orientation and Its Implication on IWP Retrievals

The accurate simulation of microwave observations of clouds and precipitation are computationally challenging. A common simplification is the assumption of totally random orientation (TRO); however, studies have revealed that TRO occurs relatively infrequently in reality. A more appropriate assumption is that of azimuthally random orientation (ARO), but so far it has been a computationally expensive task. Recently a fast approximate approach was introduced that incorporates hydrometeor orientation into the assimilation of data from microwave conically scanning instruments. The approach scales the extinction in vertical (V) and horizontal (H) polarised channels to approximate ARO. In this study, the application of the approach was extended to a more basic radiative transfer perspective using the Atmospheric Radiative Transfer Simulator and the high-frequency channels of the Global Precipitation Measurement Microwave Imager (GMI). The comparison of forward simulations and GMI observations showed that with a random selection of scaling factors from a uniform distribution between 1 and 1.4–1.5, it is possible to mimic the full distribution of observed polarisation differences at 166 GHz over land and water. The applicability of this model at 660 GHz was also successfully demonstrated by means of existing airborne data. As a complement, a statistical model for polarised snow emissivity between 160 and 190 GHz was also developed. Combining the two models made it possible to reproduce the polarisation signals that were observed over all surface types, including snow and sea ice. Further, we also investigated the impact of orientation on the ice water path (IWP) retrievals. It has been shown that ignoring hydrometeor orientation has a significant negative impact (∼20% in the tropics) on retrieval accuracy. The retrieval with GMI observations produced highly realistic IWP distributions. A significant highlight was the retrieval over snow covered regions, which have been neglected in previous retrieval studies. These results provide increased confidence in the performance of passive microwave observation simulations and mark an essential step towards developing the retrievals of ice hydrometeor properties based on data from GMI, the Ice Cloud Imager (ICI) and other conically scanning instruments.

Synergistic Evaluation of Passive Microwave and Optical/IR Data for Modelling Vegetation Transmissivity towards Improved Soil Moisture Retrieval.

Vegetation cover and soil surface roughness are vital parameters in the soil moisture retrieval algorithms. Due to the high sensitivity of passive microwave and optical observations to Vegetation Water Content (VWC), this study assesses the integration of these two types of data to approximate the effect of vegetation on passive microwave Brightness Temperature (BT) to obtain the vegetation transmissivity parameter. For this purpose, a newly introduced index named Passive microwave and Optical Vegetation Index (POVI) was developed to improve the representativeness of VWC and converted into vegetation transmissivity through linear and nonlinear modelling approaches. The modified vegetation transmissivity is then applied in the Simultaneous Land Parameters Retrieval Model (SLPRM), which is an error minimization method for better retrieval of BT. Afterwards, the Volumetric Soil Moisture (VSM), Land Surface Temperature (LST) as well as canopy temperature (TC) were retrieved through this method in a central region of Iran (300 × 130 km2) from November 2015 to August 2016. The algorithm validation returned promising results, with a 20% improvement in soil moisture retrieval.

Synergistic radar and sub-millimeter radiometer retrievals of ice hydrometeors in mid-latitude frontal cloud systems

Abstract. Accurate measurements of ice hydrometeors are required to improve the representation of clouds and precipitation in weather and climate models. In this study, a newly developed, synergistic retrieval algorithm that combines radar with passive millimeter and sub-millimeter observations is applied to observations of three frontally generated, mid-latitude cloud systems in order to validate the retrieval and assess its capabilities to constrain the properties of ice hydrometeors. To account for uncertainty in the assumed shapes of ice particles, the retrieval is run multiple times while the shape is varied. Good agreement with in situ measurements of ice water content and particle concentrations for particle maximum diameters larger than 200 µm is found for one of the flights for the large plate aggregate and the six-bullet rosette shapes. The variational retrieval fits the observations well, although small systematic deviations are observed for some of the sub-millimeter channels pointing towards issues with the sensor calibration or the modeling of gas absorption. For one of the flights the quality of the fit to the observations exhibits a weak dependency on the assumed ice particle shape, indicating that the employed combination of observations may provide limited information on the shape of ice particles in the observed clouds. Compared to a radar-only retrieval, the results show an improved sensitivity of the synergistic retrieval to the microphysical properties of ice hydrometeors at the base of the cloud. Our findings indicate that the synergy between active and passive microwave observations may improve remote-sensing measurements of ice hydrometeors and thus help to reduce uncertainties that affect currently available data products. Due to the increased sensitivity to their microphysical properties, the retrieval may also be a valuable tool to study ice hydrometeors in field campaigns. The good fits obtained to the observations increase confidence in the modeling of clouds in the Atmospheric Radiative Transfer Simulator and the corresponding single scattering database, which were used to implement the retrieval forward model. Our results demonstrate the suitability of these tools to produce realistic simulations for upcoming sub-millimeter sensors such as the Ice Cloud Image or the Arctic Weather Satellite.

Performances of six reanalysis profile products in the atmospheric correction of passive microwave data for estimating land surface temperature under cloudy-sky conditions

ABSTRACT Passive microwave (PMW) observations from the Advanced Microwave Scanning Radiometer 2 provide a way to obtain cloudy land surface temperatures (LSTs). However, atmospheric corrections must be performed on cloudy LSTs due to the cloud effect at higher frequencies. In this paper, six reanalyzed profiles, including the fifth-generation European Centre for Medium-range Weather Forecasts Reanalysis (ERA5), Interim Reanalysis (ERA-Interim), Japanese 55-year Reanalysis Data (JRA-55), Modern-Era Retrospective analysis for Research and Application V2 (MERRA2), National Centers for Environmental Prediction (NCEP) /Final Operational Global Analysis (FNL), and NCEP/Global Forecasting System (GFS), were compared with 2829 radiosonde profiles derived from the University of Wyoming. Then, their performances in correcting the atmospheric effects of LSTs at cloudy skies were investigated. Results showed that the ERA5 had the best accuracy in revealing the actual atmospheric conditions, and the RMSEs of transmittance, downward radiance, and upward radiance were about 0.007, 2.01, and 1.89 K, respectively. The RMSEs between the estimated LSTs and referenced LSTs varied from 3.15 K of the ERA5 to 6.12 K of the NCEP/FNL, indicating the ERA5 can be recommended for the atmospheric correction of PMW-based LST retrievals. Additionally, transmittance accuracy plays an essential role in impacting the LST retrievals in any weather.

Using ensemble learning to take advantage of high-resolution radar backscatter in conjunction with surface features to disaggregate SMAP soil moisture product

ABSTRACT Remote sensing based retrieved of soil moisture from low frequency passive microwave observations is preferred in different aspects such as better spatial coverage and more measurement compared to traditional ground-based measurements. However, due to coarse spatial resolution of the observations, their applications are limited in local to regional studies. This paper provides a framework using random forest regression to disaggregate the daily SMAP enhanced soil moisture (SPL3SMP_E) utilizing several ancillary data to overcome the spatial resolution limits and cloudiness effects. Ancillaries were acquired from sentinel-1 radar, MODIS monthly NDVI, land cover, topography, and surface soil properties. To validate the downscaled results with 1-km spatial resolution, the OZNET soil moisture measurements and sparse TDR ground soil moisture measurements were collected from Murrumbidgee catchment (Australia) and Firozabad catchment (Iran), respectively. Downscaled soil moisture product unbiased root-mean-square error (UnbRMSE) of ensemble learning demonstrated a range of 0.023 and –0.07 cm3/cm3. The produced downscaled soil moisture exhibited better local heterogeneity when compared to the coarse data and tracked the dynamics of temporal changes in soil moisture. Furthermore, cumulative distribution function (CDF) analysis showed good accuracy of downscaled soil moisture in grassland and cropland. Taken together, the findings supported usefulness of the suggested methodology in downscaling the medium- resolution SMAP soil moisture product.

Satellite passive microwave sea-ice concentration data set intercomparison using Landsat data

Abstract. We report on results of an intercomparison of 10 global sea-ice concentration (SIC) data products at 12.5 to 50.0 km grid resolution from satellite passive microwave (PMW) observations. For this we use SIC estimated from >350 images acquired in the visible–near-infrared frequency range by the joint National Aeronautics and Space Administration (NASA) and United States Geological Survey (USGS) Landsat sensor during the years 2003–2011 and 2013–2015. Conditions covered are late winter/early spring in the Northern Hemisphere and from late winter through fall freeze-up in the Southern Hemisphere. Among the products investigated are the four products of the European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT) Ocean and Sea Ice Satellite Application Facility (OSI SAF) and European Space Agency (ESA) Climate Change Initiative (CCI) algorithms SICCI-2 and OSI-450. We stress the importance to consider intercomparison results across the entire SIC range instead of focusing on overall mean differences and to take into account known biases in PMW SIC products, e.g., for thin ice. We find superior linear agreement between PMW SIC and Landsat SIC for the 25 and the 50 km SICCI-2 products in both hemispheres. We discuss quantitatively various uncertainty sources of the evaluation carried out. First, depending on the number of mixed ocean–ice Landsat pixels classified erroneously as ice only, our Landsat SIC is found to be biased high. This applies to some of our Southern Hemisphere data, promotes an overly large fraction of Landsat SIC underestimation by PMW SIC products, and renders PMW SIC products overestimating Landsat SIC particularly problematic. Secondly, our main results are based on SIC data truncated to the range 0 % to 100 %. We demonstrate using non-truncated SIC values, where possible, can considerably improve linear agreement between PMW and Landsat SIC. Thirdly, we investigate the impact of filters often used to clean up the final products from spurious SIC over open water due to weather effects and along coastlines due to land spillover. Benefiting from the possibility to switch on or off certain filters in the SICCI-2 and OSI-450 products, we quantify the impact land spillover filtering can have on evaluation results as shown in this paper.

Fusion Retrieval of Sea Surface Barometric Pressure from the Microwave Humidity and Temperature Sounder and Microwave Temperature Sounder-II Onboard the Fengyun-3 Satellite

Both the Microwave Humidity and Temperature Sounder (MWHTS) and the Microwave Temperature Sounder-II (MWTS-II) operate on the Fengyun-3 (FY-3) satellite platform, which provides an opportunity to retrieve the sea surface barometric pressure (SSP) with high accuracy by fusing the observations from the 60 GHz, 118.75 GHz, and 183.31 GHz channels. The theory of retrieving SSP using passive microwave observations is analyzed, and the sensitivity test experiments of MWHTS and MWTS-II to SSP as well as the test experiments of the contributions of MWHTS and MWTS-II to SSP retrieval are carried out. The theoretical channel combination is established based on the theoretical analysis, and the SSP retrieval experiment is carried out based on the Deep Neural Network (DNN) for the theoretical channel combination. The experimental results show that the retrieval accuracy of SSP using the theoretical channel combination is higher than that of MWHTS or MWTS-II. In addition, based on the test results of the contributions of MWHTS and MWTS-II to the retrieval SSP, the optimal theoretical channel combination can be built, and can further improve the retrieval accuracy of SSP from the theoretical channel combination.

Improvement of AMSR2 Soil Moisture Retrieval Using a Soil-Vegetation Temperature Decomposition Algorithm

It is well documented that soil moisture can be retrieved from passive microwave observations. A basic assumption of most passive microwave-based soil moisture retrieval algorithms is that vegetation temperatures (Tv) and soil temperatures (Ts) are equal (i.e., Tv=Ts), which however is not well satisfied in some cases, especially during daytime. In this study, we proposed a soil-vegetation temperature decomposition (SVTD) approach to avoid such an assumption, which can improve the accuracy of soil moisture retrievals from the Advanced Microwave Scanning Radiometer 2 (AMSR2) data. First, the SVTD was used to decompose the vegetation and soil temperatures of the soil-vegetation mixed pixels in the Tibetan Plateau (TP). Subsequently, the decomposed temperature was integrated into the soil moisture retrieval algorithm to correct the effects of soil and vegetation temperatures, and soil moisture is then retrieved following the same strategy adopted in the land parameter retrieval model (LPRM). Finally, the algorithm was validated against densely-instrumented soil moisture networks (Maqu, Naqu, and Ngari) built in the Tibetan Plateau, and was also compared with the LPRM AMSR2 soil moisture product. Results indicate the proposed algorithm performs much better than the original LPRM in soil-vegetation mixed areas. The proposed SVTD method is promising for soil moisture retrieval from passive microwave satellites, especially in the daytime when the difference between soil and vegetation temperatures is relatively large.

Derived Observations From Frequently Sampled Microwave Measurements of Precipitation—Part III: Convoys of mm-Wave Radiometers

This is the third of three papers that quantify the high added value of frequent satellite microwave observations of the atmosphere (with a “refresh” time on the order of one minute) to capture the dynamics of weather systems. Recent advances in small-satellite and microwave miniaturization, such as the “Temporal Experiment for Storms and Tropical systems” (TempEST) millimeter-wave radiometer developed at the Jet Propulsion Laboratory, are paving the way for the design of convoys of spaceborne radars that can directly observe the evolution of severe weather at very fine temporal scales. The analyses presented here are to establish the relation between passive microwave observations and their change in time and the underlying cloud variables and processes, and to evaluate the sensitivity to the different physical and instrument parameters. In this third part, simulations are used to demonstrate and quantify the direct sensitivity of a time sequence of mm-wave radiances to the vertical structure of the vertical updrafts in convective storms. It is demonstrated that the brightness temperatures from a pair of low-Earth-orbit radiometers maintaining a separation of one or two minutes can indeed be used to retrieve the column-maximum magnitude of the vertical wind as well as the height of the maximum. While such passive retrievals do not provide the vertical detail that a pair of radars would produce, the radiometers have a vast swath and therefore enable the observation of an entire storm. The application is therefore quite different from the case of a convoy of radars: rather than compiling radar statistics over multiple years, the radiometer-convoy measurements can be used to analyze every storm that is observed.

Does AGRI of FY4A Have the Ability to Capture the Motions of Precipitation?

Calculating the motion vectors based on the infrared observations can complement the gaps of the passive microwave and radar observations. So, it is an essential step in numerical weather models and other meteorological applications. FengYun-4 (FY4A) geosynchronous satellite was launched in 2016 by the Chinese government. Carrying on board the Advanced Geosynchronous Radiation Imager (AGRI), FY4A can provide instantaneous observations from visible to infrared wavelength. However, the ability of FY4A to capture precipitation motions still needs to be explored, and the optimal scale for generating the motion vectors remains unclear. In this study, a reasonable sliding window strategy is applied to calculate the correlation coefficients between two image sequences to determine the motion vectors. Based on this, the China Merged Precipitation Analysis (CMPA) data is recognized as the true precipitation data and is compared with the 10.7 µm observations of AGRI aboard FY4A. The results in August 2018 show that based on the quantified directions of the motion vectors between the CMPA and FY4A-TBB, the correlation coefficient (CC) and Root Mean Square Error (RMSE) are about 0.64 and 2.1 respectively, which are acceptable at the resolution of 0.5°. The result indicates that FY4A can capture precipitation motions. Meanwhile, as the resolution becomes lower, the probability distributions of the motion vectors in FY4A-TBB are more similar to those in CMPA, and they become stable at 0.5°. Therefore, 0.5° is considered the optimal resolution to generate the motion vectors for FY4A-TBB. The study results have great potentials for the precipitation estimate retrieval and fusion forFY4A and also FY4B.

Bayesian Deep Learning for Passive Microwave Precipitation Type Detection

Precipitation is one of the primary drivers of earth’s water and energy cycles. While its role in the climate system is generally well-understood, our ability to accurately capture the spatio-temporal distribution of precipitation is limited. Satellite-borne passive microwave (PMW) radiometers and the associated research on their precipitation retrievals provide a highly accurate understanding of global total precipitation. Still, these precipitation retrievals are prone to large systematic errors at all spatial and temporal scales given their inability to accurately relate changes in precipitation intensity to the changes in radiometric signatures caused by variability in cloud system structure. Central to generating estimates of precipitation is proper classification of precipitation type, that is, convective or stratiform. This work presents a study on using a Bayesian deep learning (BDL) to help mitigate this problem by accurately classifying precipitation type and providing uncertainty in the classification. Specifically, it adopts a Bayesian form of Residual Networks (ResNet) architectures to extract the information from PMW observations vectors and identify these structural differences of cloud systems while providing, per pixel, classification uncertainty estimates. Benchmarked ResNet architectures in a deterministic configuration achieve accuracies above 86% on the classification task for precipitation type, while a Bayesian configuration of the same architectures reaches accuracy above 90%. Most importantly, uncertainty estimates are predicted by the Bayesian configuration to accompany each individual output value. This allows end-users to use them to calibrate the output by filtering the least certain predictions. The performance of the classifier, therefore, can be further improved depending on the application needs.

Understanding the Non‐Linear Response of Summer Evapotranspiration to Clouds in a Temperate Forest Under the Impact of Vegetation Water Content

AbstractUnderstanding the cloud impact on forest evapotranspiration (ET) is crucial for studying the interaction of vegetation‐cloud‐atmosphere. Combining long‐term (2003–2010) satellite passive microwave observations and in‐situ measurements, a non‐linear response of canopy‐scale ET to cloud increase was found at a temperate forest in Northeast China. As cloud increased, an initial enhancement (4%–10%) in ET occurred under less cloudy sky, while a significant reduction (>20%) in ET occurred under more cloudy sky. The phenomenon existed under both high and low vegetation water content (VWC) indicated by satellite microwave emissivity difference vegetation index (EDVI). Analysis showed that this was the combined effect from the enhancement (5%–30%) in evaporative fraction (EF) and the reduction (5%–50%) in net radiation under cloud increase. Decoupling analysis based on coefficients (ρ) of path analysis model showed that enhanced EF (ρ > 0.61) rather than radiation (ρ < 0.47) dominated the ET enhancement under less cloudy sky, while the control of reduced radiation became stronger (ρ > 0.63) and could not be compensated by increased EF (ρ < 0.48) under more cloudy sky. EF enhancement under clouds was strongly correlated with the decline in canopy resistance (Rs) which was dominated by vapor pressure deficit (VPD). Higher VWC increased ET via reducing Rs and enlarging EF. This positive effect of VWC was more noticeable under less cloudy sky. Associated mechanisms could be related to the dynamic controls of plant physiology and environmental conditions induced by VWC and clouds. This study highlighted the dynamic effect of clouds and VWC on forest ET and improved our knowledge of vegetation‐cloud interactions.

The ice factory of Hudson Bay

Within the dynamic seasonal ice cover of Hudson Bay, the Kivalliq Polynya is a large latent heat polynya that forms throughout winter in the northwest as a result of strong northwesterly offshore surface winds. Polynyas are known to be physically, biologically, and geochemically important and contribute to the regional ice mass balance; however, the Kivalliq Polynya has yet to be characterized in terms of spatiotemporal variability and ice production. Using a thin ice algorithm applied to the 16-year record of daily AMSR-E and AMSR-2 passive microwave observations, we examine the interannual variability in the spatial and temporal characteristics of the polynya throughout winter (December–April) over the period 2002–2019. Our study reveals that the polynya is present in some form almost every day but that its daily area is highly variable. On average, 182 km3 of new ice is produced in the Kivalliq Polynya during winter, or approximately 20% of the end of winter ice volume in Hudson Bay. Daily ice production is found to be significantly correlated with the daily polynya area, though large, episodic events can increase annual cumulative ice production during a year of otherwise small polynyas. Annual cumulative ice production is also found to be significantly correlated with seasonally averaged offshore wind speeds, which explain 47.3% of the variance in winter ice production and drive a 46 km3 increase in ice production for every 1.0 m s–1 increase in offshore winds. Ultimately, the highly variable yet persistent Kivalliq Polynya is shown to be driven by offshore winds and significantly contributes to the regional ice mass balance.

Comparisons of IMERG Version 06 Precipitation At and Between Passive Microwave Overpasses in the Tropics

AbstractThe Integrated Multi-Satellite Retrievals for Global Precipitation Measurement Mission (IMERG) is a global precipitation product that uses precipitation retrievals from the virtual constellation of satellites with passive microwave (PMW) sensors, as available. In the absence of PMW observations, IMERG uses a Kalman filter scheme to morph precipitation from one PMW observation to the next. In this study, an analysis of convective systems observed during the Convective Process Experiment (CPEX) suggests that IMERG precipitation depends more strongly on the availability of PMW observations than previously suspected. Following this evidence, we explore systematic biases in IMERG through bulk statistics.In two CPEX case studies, cloud photographs, pilot’s radar, and infrared imagery suggest that IMERG represents the spatial extent of precipitation relatively well when there is a PMW observation but sometimes produces spurious precipitation areas in the absence of PMW observations. Also, considering an observed convective system as a precipitation object in IMERG, the maximum rain rate peaked during PMW overpasses, with lower values between them. Bulk statistics reveal that these biases occur throughout IMERG Version 06. We find that locations and times without PMW observations have a higher frequency of light precipitation rates and a lower frequency of heavy precipitation rates due to retrieval artifacts. These results reveal deficiencies in the IMERG Kalman Filter scheme, which have led to the development of the Scheme for Histogram Adjustment with Ranked Precipitation Estimates in the Neighborhood (SHARPEN; described in a companion paper) that will be applied in the next version of IMERG.

Snow Water Equivalent Retrieval Using Active and Passive Microwave Observations

AbstractThis paper implements a newly developed combined active and passive algorithm for the retrieval of snow water equivalent (SWE) by using three‐channel active and two‐channel passive observations. First, passive microwave observations at 19 and 37 GHz are used to determine the scattering albedo of snow. An a priori scattering albedo is obtained by averaging over time series observations. Second, 13.3 GHz is introduced to formulate a three‐channel (9.6, 13.3, and 17.2 GHz) radar algorithm which reduces effects of background scattering from the snow‐soil interface, and improves SWE retrieval. In the algorithm, the bicontinuous dense media radiative transfer (DMRT‐Bic) is used to compute look‐up tables (LUTs) of both radar backscatter and radiometer brightness temperatures (TBs) of the snowpack. To accelerate the retrieval, a parameterized model is derived from LUT by regression training, which links backscatter to the scattering albedo at 9.6 GHz or 13.3 GHz and to SWE. The volume scattering of snow is obtained by subtracting the background scattering from radar observations. SWE is then retrieved through a cost function that is guided by the a priori scattering albedo obtained from the passive microwave observations. The proposed algorithm, along with the active‐only version, is evaluated against the Finnish Nordic Snow Radar Experiment (NoSREx) data set measured in 2009–2013. The combined active‐passive algorithm achieves root mean square errors (RSME) less than 27 mm and correlation coefficients above 0.68 for 2009–2010, RMSE less than 21 mm and correlation above 0.85 for 2010–2011, and RMSE less than 40 mm and correlation above 0.38 for 2012–2013.