Particulate Cancellous Bone And Marrow Research Articles

Clinical evaluation of bone quality of particulate cancellous bone and marrow, and implant prosthetic rehabilitation

This study aimed to subjectively evaluate bone quality in the particulate cancellous bone and marrow (PCBM) graft area and to assess the survival rates of implants.A retrospective review was conducted based on patient age, sex, diagnosis, reconstructed site, number of implants, prosthetic type, and duration of follow-up. Images from computed tomography (CT) before implant insertion were obtained and used in this study. We selected a 4.0-mm diameter × 8.0-mm length region of interest in the implant placement area, and measured the CT attenuation value.No significant correlations were seen between CT attenuation values and implant survival rates in the maxilla and mandible. On the other hand, CT attenuation values and implant survival rates were significantly lower in patients with malignancy than in non-malignant cases.Placing implants in PCBM grafted bone requires a full understanding of bone quality before surgery and drilling to ensure primary stability, along with consideration of soft tissue management and maintenance programs.

Towards Optimum Mandibular Reconstruction for Dental Occlusal Rehabilitation: From Preoperative Virtual Surgery to Autogenous Particulate Cancellous Bone and Marrow Graft with Custom-Made Titanium Mesh-A Retrospective Study.

The purpose of this retrospective study was to evaluate computer-assisted virtual surgery and the outcomes of mandibular reconstruction using an autogenous particulate cancellous bone and marrow (PCBM) graft combined with a custom-made titanium mesh (TiMesh) using a three-dimensional (3D) printing model. Eighteen consecutive patients were included, and preoperative virtual simulation surgery was performed using digital data. Segmental bone defects showed deviation of the mandible due to displacement of the condyle and segments, unnatural length of the mandibular body, or poorer intermaxillary relationship compared to the marginal bone defect caused by previous operations. These mandibular disharmonies could be simulated, and virtual surgery was performed on a computer with adjustment of displaced mandibular segments, length of the mandibular body, and dental arch with digital bone augmentation. TiMesh was manually pre-bent using a 3D printing model, and PCBM from the iliac crest was grafted with TiMesh. The short-term clinical results were good; reconstruction of the alveolar crest was prosthetically desirable; and minor complications were observed. In conclusion, virtual reconstruction is crucial for treating complex deviated mandibles. Accurate condylar and dental arch positions with an optimum mandibular length are important for prosthetically satisfactory mandibular reconstruction.

Anterior Dental Implant in Grafted Cleft Alveolus: A Clinical Comparison Between Intramembranous and Endochondral Bone Graft.

Alveolar bone graft is usually performed during the early mixed dentition phase, at the chronological age of 6 to 8 years old, to reconstruct the cleft alveolus. As the appropriate time for implant placement is after completion of full growth, it can result in a likelihood of resorption. The aim of this study is to compare the clinical outcomes of anterior dental implants with delayed bone grafting using iliac crest (endochondral) and mandibular ramus or symphysis (intramembranous) bone in adolescents to adulthood patients with cleft alveolus. This study included 10 patients with cleft alveolus who underwent delayed bone grafting with autogenous block bone and particulate cancellous bone and marrow (PCBM) from the mandibular ramus and symphysis with dental implant placement, and iliac crest. The success of the treatment was evaluated through clinical and radiographic examination including marginal bone loss measurement of the implants. All patients underwent delayed bone grafting between the ages of 11 and 21.1 years (mean age: 15.1±4.3y). The implant diameters ranged from 3.8 to 4.5mm and the lengths ranged from 8.0 to 11.5mm. All of the implants were integrated successfully and survived during the 3-year follow-up period. Delayed bone grafting followed by implant placement showed long-term stability with satisfactory esthetic and functional rehabilitation. One of the main advantages of delayed bone grafting is to achieve adequate bone support for future dental implant placements with less bone resorption compared with those of primary, early secondary, and secondary bone grafting.

Platelet-rich fibrin did not affect autologous bone graft in repairing alveolar clefts

ObjectiveTo investigate effect of platelet-rich fibrin (PRF) on bone regeneration in repairing alveolar clefts with autologous particulate cancellous bone and marrow (PCBM) from iliac crest. MethodsAlveolar cleft patients were randomly divided into the PRF group (mixing PCBM with liquid PRF and covering the graft with PRF membranes) or control group (PCBM only). After bone graft, the regenerated bone volume was assessed by cone beam computed tomography (CBCT) at 6 months, the bone density was evaluated by CBCT at 6 months and periapical radiographs at 1, 3, and 6 months. The position of the regenerated bone at 6-months was classified using the Chelsea scale. The Mann-Whitney U test was used to analyze differences in bone volume and density between groups. ResultsFifteen alveolar cleft sites (13 patients, aged 8–14 years old) were analyzed. The PRF and control group consisted of 8 and 7 cleft sites, respectively. The regenerated bone volume and density were not significantly different between both groups. The Chelsea scale results were similar in both groups. All clefts healed uneventfully. ConclusionsPRF did not affect bone regeneration when repairing alveolar clefts with autologous PCBM.

A case of glandular odontogenic cyst with mandibular segmental resection and secondary reconstruction

AbstractGlandular odontogenic cyst (GOC) is an uncommon cyst that is locally aggressive and has recurring potential. This report presents a case of GOC that was successfully treated using segmental resection and reconstruction with particulate cancellous bone and marrow (PCBM). We report the case of a 56‐year‐old woman with GOC. She underwent left mandibular segmental resection and secondary reconstruction with PCBM. At the 2‐year follow‐up, healing was satisfactory with no sign of recurrence, and an esthetically satisfactory outcome was achieved. Segmental resection and mandibular reconstruction have contributed to maintain patient's facial appearance with no sign of recurrence.

Full Regeneration of Maxillary Alveolar Bone Using Autogenous Partially Demineralized Dentin Matrix and Particulate Cancellous Bone and Marrow for Implant-Supported Full Arch Rehabilitation.

Autogenous partially demineralized dentin matrix (APDDM) has been reportedly used as a superior bone graft material. A 52-year-old Japanese man who exhibited severe periodontitis was referred for oral rehabilitation. He underwent wide-range anterior maxillary alveolar bone and bilateral sinus floor augmentation by grafting of a mixture of APDDM and particulate cancellous bone and marrow (PCBM); subsequently, he underwent implant-supported full arch rehabilitation. He has been followed up for 4 years after placement of the final restoration without any complications, and his physiological bone volume has been maintained. APDDM constitutes an alternative treatment that may increase the volume of graft material and might prevent rapid resorption of PCBM, because APDDM served as a scaffold for osteoblasts from PCBM. When possible, it may be useful to apply APDDM as a graft material with PCBM for large-volume alveolar bone regeneration.

Mandibular reconstruction with a ready-made type and a custom-made type titanium mesh after mandibular resection in patients with oral cancer

BackgroundAfter the resection at the mandibular site involving oral cancer, free vascularized fibular graft, a type of vascularized autograft, is often used for the mandibular reconstruction. Titanium mesh (T-mesh) and particulate cancellous bone and marrow (PCBM), however, a type of non-vascularized autograft, can also be used for the reconstruction. With the T-mesh applied even in the chin and angle areas, an aesthetic contour with adequate strength and stable fixation can be achieved, and the pores of the mesh will allow the rapid revascularization of the bone graft site. Especially, this technique does not require microvascular training; as such, the surgery time can be shortened. This advantage allows older patients to undergo the reconstructive surgery.Case presentationReported in this article are two cases of mandibular reconstruction using the ready-made type and custom-made type T-mesh, respectively, after mandibular resection. We had operated double blind peer-review process. A 79-year-old female patient visited the authors’ clinic with gingival swelling and pain on the left mandibular region. After wide excision and segmental mandibulectomy, a pectoralis major myocutaneous flap was used to cover the intraoral defect. Fourteen months postoperatively, reconstruction using a ready-made type T-mesh (Striker-Leibinger, Freibrug, Germany) and iliac PCBM was done to repair the mandible left body defect.Another 62-year-old female patient visited the authors’ clinic with pain on the right mandibular region. After wide excision and segmental mandibulectomy on the mandibular squamous cell carcinoma (SCC), reconstruction was done with a reconstruction plate and a right fibula free flap. Sixteen months postoperatively, reconstruction using a custom-made type T-mesh and iliac PCBM was done to repair the mandibular defect after the failure of the fibula free flap. The CAD-CAM T-mesh was made prior to the operation.ConclusionsIn both cases, sufficient new-bone formation was observed in terms of volume and strength. In the CAD-CAM custom-made type T-mesh case, especially, it was much easier to fix screws onto the adjacent mandible, and after the removal of the mesh, the appearance of both patients improved, and the neo-mandibular body showed adequate bony volume for implant or prosthetic restoration.

Computed Tomographic Estimation of Particulate Cancellous Bone and Marrow Weight for Successful Transplant in Unilateral Cleft Lip and Palate Patients.

The defect volume measured on computed tomography (CT) for secondary bone graft (SBG) is well correlated to the actual amount of particulate cancellous bone and marrow (PCBM) transplanted in unilateral cleft lip and palate (UCLP) patients. However, the validity of such measurements have not been completely verified due to lack of evaluation of treatment results. The objective of this study was to propose an estimation method by CT based on the data of successfully treated patients. For this purpose, the association was initially verified between the weight of transplanted PCBM and the defect volume measured on CT using the results of successfully treated patients. Treatment results were evaluated 1 year after SBG by intraoral radiography in 50 UCLP patients. For the patients with good results, the correlation was investigated between the defect volume on CT and the transplanted PCBM weight, and a method was proposed based on PCBM density, calculated as PCBM weight divided by defect volume on CT. In successfully treated patients showing level 3 or 4 alveolar resorption, a strong correlation (r = .87) was found between the volume on CT and the PCBM weight. Level 4 results were observed in 22 of 23 (95.7%) patients who had calculated PCBM densities of more than 6 g/cm3. Volume estimation on preoperative CT was confirmed to have sufficient validity. The weight of PCBM transplanted should be greater than the defect volume on CT multiplied by 6.

Evaluation of graft uptake from the iliac crest in secondary alveolar bone grafting: Bergland’s criteria revisited

Back groundThe secondary alveolar grafting is an integral part in the management of alveolar cleft defect. Particulate cancellous bone and marrow (PCBM) graft obtained from iliac crest are considered as the gold standard. AimAim of the study was to evaluate the graft uptake clinically and radiologically using the Bergland’s radiographic scale. Material and methodsA longitudinal descriptive study was conducted on twenty patients of unilateral CLP in the age group of 6–13 years, presenting with residual/secondary alveolar cleft defect with unerupted maxillary lateral incisor/canine adjacent to the defect. Autologous PCBM graft obtained from iliac crest was used in all cases. Post operative clinical and radiological evaluation was carried out using the Bergland’s radiographic scale at intervals of 1 week, 1 month and 6 months. Data collection and resultClinical evaluation consisted of assessment for infection, exposure of graft, rejection of graft, wound dehiscence and status of oronasal communication. A four-point Bergland’s radiographic scale was used to compare the interdental height of the bone graft with unaffected side and categorized from grade I to IV. After six months, 6 cases were graded as grade I, 11 cases as grade II and 2 cases were grade III. Only one case deteriorated to grade IV which is considered as failure. Summary and conclusionSatisfactory results were obtained in 95% cases. Bergland’s radiographic assessment scale is a valuable, easily available and inexpensive diagnostic tool to assess the condition of the grafted bone in SABG.

Clinical Usefulness of Mandibular Reconstruction Using Custom-Made Titanium Mesh Tray and Autogenous Particulate Cancellous Bone and Marrow Harvested From Tibia and/or Ilia.

The objective of this study was to evaluate usefulness of mandibular reconstructions using custom-made titanium mesh (Ti-mesh) tray and particulate cancellous bone and marrow (PCBM). Consecutive 21 patients who underwent mandibular reconstruction were enrolled in this study. They were 13 men and 8 women (mean age, 52.0 years). Virtual reality simulation was performed using computer software based on the preoperative computed tomography data. A 3-dimensional skull model was constructed using 3-dimensional printer. A tray was custom-made from Ti-mesh sheet bent to adapt to the model. After PCBM harvesting from posterior ilia and/or proximal tibia, the tray was fixed to the host bone. New bone formation and configuration of the reconstructed mandible were assessed radiologically. Complications were recorded in each patient during the follow-up period. Patients' satisfaction with postoperative facial contour was evaluated using visual analog scale (VAS score, range, 0-100). In 16 of 21 patients, excellent new bone formation was recognized and expected results were radiologically achieved. In 5 patients, new bone formation was insufficient. Causes of insufficient bone formation included postoperative infection in 2 patients, Ti-mesh tray fracture in 2 patients, and local recurrence of lower gingival cancer in 1 patient. To prevent a tray fracture, a double-layered Ti-mesh tray was useful. Mean VAS score on patients' satisfaction was 77.1. Our results comprehensively suggest that mandibular reconstruction using custom-made Ti-mesh tray and PCBM is clinically useful.

Use of a trephine bur and curette for minimally invasive harvesting of particulate cancellous bone and marrow from the iliac crest: a case of alveolar ridge reconstruction.

Iliac particulate cancellous bone and marrow (PCBM) is still the most predictable autogenous graft material for vertical ridge reconstruction because of its high cell content as well as osteoinductive and osteoconductive properties. However, postoperative meralgia paresthetica, gait disturbance, pain, and bleeding have been reported following conventional harvesting from the anterior iliac crest. We present a case of minimally invasive harvesting of iliac PCBM. A short incision was made, and the iliac crest was exposed after elevation of the periosteal membrane. Only the iliac cortical bone was removed using a trephine bur to avoid perforation. PCBM was harvested with hand curettes and grafted into the vertical ridge defect. Because of the small surgical field, gait disturbance was resolved within 1 day without other postoperative complications. This technique is potentially useful for harvesting a small amount of iliac PCBM.

Clinical usefulness of mandibular reconstruction using custom-made titanium mesh tray and autogenous particulate cancellous bone and marrow harvested from tibia and/or ilia

The objective of this study was to evaluate usefulness of mandibular reconstructions using custom-made titanium mesh (Ti-mesh) tray and particulate cancellous bone and marrow (PCBM). Consecutive 21 patients who underwent mandibular reconstruction were enrolled in this study. They were 13 men and 8 women (mean age, 52.0 years). Virtual reality simulation was performed using computer software based on the preoperative computed tomography data. A 3-dimensional skull model was constructed using 3-dimensional printer. A tray was custom-made from Ti-mesh sheet bent to adapt to the model. After PCBM harvesting from posterior ilia and/or proximal tibia, the tray was fixed to the host bone. New bone formation and configuration of the reconstructed mandible were assessed radiologically. Complications were recorded in each patient during the follow-up period. Patients' satisfaction with postoperative facial contour was evaluated using visual analog scale (VAS score, range, 0-100). In 16 of 21 patients, excellent new bone formation was recognized and expected results were radiologically achieved. In 5 patients, new bone formation was insufficient. Causes of insufficient bone formation included postoperative infection in 2 patients, Ti-mesh tray fracture in 2 patients, and local recurrence of lower gingival cancer in 1 patient. To prevent a tray fracture, a double-layered Ti-mesh tray was useful. Mean VAS score on patients' satisfaction was 77.1. Our results comprehensively suggest that mandibular reconstruction using custom-made Ti-mesh tray and PCBM is clinically useful.

Computer-Assisted Surgery for Mandibular Reconstruction Using a Patient-Specific Titanium Mesh Tray and Particulate Cancellous Bone and Marrow

Craniomaxillofacial surgery is difficult due to the complexity of the regional anatomy. Computer-assisted surgery is a promising tool aiming to improve the safety and precision of such surgery. A computer-assisted surgical navigation approach for reconstruction of mandibular defects using a patient-specific titanium mesh tray and particulate cancellous bone and marrow (PCBM) harvested from bilateral anterior ilia is proposed. This case report involves a large multicystic ameloblastoma affecting the right mandible of a 31-year-old male patient. Following detailed clinical examination, radiological interpretation, and histopathological diagnosis, computer-assisted surgical simulation with a virtual 3-dimensional (3-D) model was designed using surgical planning software based on the pre-operative computed tomography data. Long-span segmental resection of the mandible was planned, and the defect was analyzed for reconstruction using a patient-specific reconstruction titanium mesh tray mediated with computer-aided design and manufacturing (CAD/CAM) techniques. During the actual surgery, the ultrasonic bone cutting instrument in the surgeon’s hand was connected to the navigation system to touch an anatomical position on the patient. Therefore, osteotomies were performed finely and smoothly according to the navigation images of the cutting bone line by sequentially moving the instrument. Finally, a CAD/CAM-mediated titanium mesh tray condensed by PCBM was adapted to the remaining mandibular fragments. Six months postoperatively, the patient had a good mandibular configuration and facial contour. Integration of different technologies, such as software planning and 3-D surgical simulation, combined with intraoperative navigation and CAD/CAM techniques, provides safe and precise mandibular reconstruction surgery.

歯槽骨・顎骨および軟骨の再生

In maxillofacial region, reconstruction of defects after inflammation, trauma, tumor resection and congenital anomaly should be functional and aesthetic. Meanwhile, recent approaches using regenerative medicine have shown great potential, enabling functionally and esthetically-satisfying reconstructions with less invasive manner. This review describes such regenerative medicine of bone in maxillofacial region, including transplantation of particulate cancellous bone and marrow (PCBM) in combination with a titanium mesh tray, and custom-made artificial bone (CT-Bone). Our preclinical and clinical study on tissue-engineered cartilage for patients with cleft-lip and nose is also covered.

Mandibular reconstruction using custom-made titanium mesh tray and particulate cancellous bone and marrow harvested from bilateral posterior ilia

The objective of this study is to evaluate usefulness of mandibular reconstructions using a custom-made titanium mesh (Ti-mesh) tray and particulate cancellous bone and marrow (PCBM). A consecutive nine patients who underwent mandibular reconstruction were enrolled in this study. They were five men and four women (mean age: 53.9 years). Virtual reality simulation was performed using computer software based on the pre-operative computed tomography data. A 3-dimensional (3-D) skull model was constructed using a 3-D printer. A tray was custom-made from a Ti-mesh sheet bent to adapt to the model. After PCBM harvesting from bilateral posterior ilia, the tray was fixed to the host bone. New bone formation and configuration of the reconstructed mandible were assessed radiologically. Complications were recorded in each patient during the follow-up period. Patients, satisfaction with post-operative facial contour was evaluated using a visual analogue scale (VAS score, range = 0–100). In six of nine patients, excellent new bone formation was recognised and expected results were radiologically achieved. Complications occurred in four patients. These complications included Ti-mesh fracture, Ti-mesh exposure in the oral cavity, and delayed infection. Mean VAS score on patient satisfaction was 77.6. Although the data are preliminary, the results suggest that this method is clinically useful.

Mandibular reconstruction using a poly(l-lactide) mesh combined with autogenous particulate cancellous bone and marrow: a prospective clinical study

The purpose of this study was to evaluate the stability and viability of mandibular bone regeneration using a poly(l-lactide) (PLLA) mesh and autogenous particulate cancellous bone and marrow (PCBM). Sixty-two procedures were undertaken at eight hospitals (22 malignant tumours, 30 benign tumours, five cysts, two osteomyelitis, two trauma, and one atrophy of the alveolar ridge); the success rate was 84%. The follow-up period was between 9 and 200 months (mean 88.2 months). Consequently, bone regeneration at 6 months postoperation was excellent in 35 cases (57%), good in 17 cases (27%), and poor in 10 cases (16%). In six of the ‘poor’ cases, the PLLA mesh was removed due to local infection early after surgery. Bone resorption>20% was observed in only one of 46 cases with a follow-up term of >1 year. There were no signs of any other adverse effects except in one case where a section of the tray broke off late in the follow-up period. It is concluded that this method is stable and effective due to favourable morphological and functional recovery and low invasiveness. It may thus be a useful alternative procedure for mandibular reconstruction.

Application of custom-made bioresorbable raw particulate hydroxyapatite/poly-l-lactide mesh tray with particulate cellular bone and marrow and platelet-rich plasma for a mandibular defect: Evaluation of tray fit and bone quality in a dog model

The purpose of this study was to evaluate tray fit and bone quality of particulate cancellous bone and marrow (PCBM) mandibular reconstruction using custom-made bioresorbable forged composites of a raw particulate hydroxyapatite/poly-l-lactide (HA/PLLA) tray in a dog model. Mesh sheets of HA/PLLA were formed in a tray shape according to the mandible stereolithographs of 14 beagle dogs. Platelet-rich plasma (PRP) was obtained from venous blood, and PCBM was harvested from the iliac crest. Bone defects were made bilaterally on the lower borders of the mandible. The PCBM and PRP were mixed and compressed into the defects and a custom-made HA/PLLA or a manually adopted titanium tray was fixed by screws. Tray fit and bone qualities were evaluated using computed tomography, microfocus computed tomography and confocal laser scanning microscopy. In buccal side, there is no significant difference with tray fit between the HA/PLLA and the titanium type, but in lingual side, it was better in the HA/PLLA type than that of the Ti type. Bone volume fraction (BV/TV) had markedly increased on the HA/PLLA side at 12 months. In conclusion, the custom-made HA/PLLA tray was easily and accurately adapted to the mandible, and had achieved sufficient bone quality by 12 months.

Evaluation of secondary bone grafting of the alveolar cleft in adult cleft lip and palate patients

ObjectiveThe aim of this study was to evaluate 13 adult cleft lip and palate patients who underwent secondary bone grafting using short-term follow-up examinations. Materials and methodsThe subjects were 13 cleft lip and palate patients. The mean age of the subjects were 28.6 years old (range: 20–47 years). Seven of the patients had BCLP, seven had UCLP, and one had UCLA. None of them had BCLA. Autogenous particulate cancellous bone and marrow (PCBM) was grafted onto the alveolar clefts. The marginal bone levels of the grafted bone were assessed by means of periapical films, which were taken after an observation period of six months, according to the Enemark's classification. ResultsEight bone grafted alveoli had scores of 1 (53.3%), six had scores of 2 (40%), and one had score of 4 (6.3%). None had score of 3. The formation of bone bridges was satisfactory in 93% of the bone-grafted alveoli. The postoperative prostheses used in this study (15 bone grafted alveoli) included seven dental implants; one straightening of the teeth alone; one straightening of the teeth and dentures; and two cases in which the prostheses used were unknown. Patients who underwent dental implant surgery had obviously higher score of Enemark's score (1.8) than those without dental implant (3.1). ConclusionThis study confirmed that PCBM grafting of alveolar clefts works as well for adult patients as it does for pediatric patients and the effectiveness of use of implants in the grafted alveoli to the maintenance of the grafted bone.

Mandibular Reconstruction Using a Tray With Particulate Cancellous Bone and Marrow and Platelet-Rich Plasma by an Intraoral Approach

To evaluate the possibility of immediate mandibular reconstruction using particulate cancellous bone and marrow (PCBM), platelet-rich plasma (PRP), and a tray, we compared the postsurgical infection rate and bone formation in patients who received mandibular reconstruction with this method using either an intraoral or extraoral approach. We conducted a retrospective study of a series of 18 patients who underwent the mandibular reconstruction procedure using a mesh tray with PCBM and PRP, all performed by 1 surgeon. These cases were further divided into those treated by the intraoral approach and those treated by the extraoral approach. Clinical data, postoperative bone formation, and complications in the 2 groups were evaluated. The χ(2) examination and the Mann-Whitney U test were used for statistical analysis. We could not detect any statistically significant differences in clinical data between the 2 groups, except for the timing of reconstruction. There were postoperative complications such as wound dehiscence and tray exposure, as well as infection of the reconstructed bone. The overall complication rate of the recipient sites in the intraoral group was 30% (3 of 10), whereas in the extraoral group, it was 0%. However, satisfactory bone formation was seen in all cases in the intraoral group (100% [10 of 10]) but only 87.5% (7 of 8) in the extraoral group. We conclude that mandibular reconstruction using a tray with PCBM and PRP is a safe and reliable method for cases of benign tumor and trauma, even if immediate reconstruction is performed by an intraoral approach.

Analysis of bone volume using computer simulation system for secondary bone graft in alveolar cleft

The purpose of this study was to measure the bone volume necessary for secondary bone grafting in the alveolar cleft using surgical simulation software based on three-dimensional computed tomography (CT) scan data, to compare this measurement with the actual volume of the bone graft, and to evaluate consistency. The subjects were 13 patients with cleft lip and palate who underwent CT using a cone-beam CT unit (CB-CT) 1 month before surgery, followed by bone grafting with particulate cancellous bone and marrow (PCBM) to close the cleft. The bone volume necessary for grafting was measured based on the CB-CT scan data. Correlation analysis, a test of the population mean between two samples, and Wilcoxon's signed rank test were conducted between these measurements and the actual bone volume (PCBM volume) used for grafting. SPSS was used for statistical analysis, and the level of significance was set below the 5% level. The results showed a significant correlation, with no significant differences between the two in all tests. These results suggest that measuring and preoperatively calculating the bone volume necessary for bone grafting with surgical simulation software using CB-CT scan data is beneficial.