Particle Swarm Optimization Algorithm Research Articles

Research on Data Feature Selection of Sharing Platform Based on Particle Swarm Optimization Algorithm

Abstract. This paper is based on the optimization of machine learning models such as SVM (Support Vector Machine) and LightGBM through the application of PSO (Particle Swarm Optimization) and combines shared platform recovery data to provide training material for machine models. The goal is to accelerate the parameter configuration of machine learning models and enhance the rigor of feature selection through the application of algorithmic models. The experimental results show that PSO performs well in optimizing parameters for machine learning models like SVM and LightGBM, achieving high levels in evaluation metrics such as accuracy, recall, precision, and F1 score. Based on this, a framework is proposed for embedding the PSO algorithm into a shared platform architecture, including layers for data collection and preprocessing, algorithm integration and optimization, decision support and service, and feedback and optimization. This framework allows for precise predictions of user behavior, market demand, and other factors, achieving automated scheduling of machine model parameters.

Prediction of moisture content ratio of emulsified asphalt chip seal based on machine learning and electrical parameters

The moisture content ratio (MCR) of the emulsified asphalt chip seal can determine its curing degree. However, the MCR of emulsified asphalt chip seal is difficult to measure on actual projects, and there is a lack of a method to assess its MCR. The objective of this study is to establish a prediction methodology for the MCR of emulsified asphalt chip seal based on machine learning and electrical parameters. Features such as electrical parameters and MCR of emulsified asphalt chip seal at different times were measured experimentally. The importance of the features was evaluated using a Random Forest (RF) model. A Back Propagation Neural Network (BPNN) prediction model was established using the important features. The weights and biases of the BPNN were optimized and initialized using the Improved Particle Swarm Optimization (IMPSO) algorithm. As a result, the RF-IMPSO-BPNN emulsified asphalt chip seal MCR prediction model was developed. This model was compared with five other models. The results show that compared to the RF-PSO-BPNN model, the improved RF-IMPSO-BPNN model can improve the ability of the neural network to find the global optimal solution. Compared to the other four machine learning models, the RF-IMPSO-BPNN model can achieve higher prediction accuracy while reducing the human and material resources of the various devices to collect part of the data. In addition, the emulsified asphalt chip seal cures at low MCR. The model predictions are more accurate at low MCR. Therefore, this study developed the RF-IMPSO-BPNN emulsified asphalt chip seal MCR prediction model, which can use fewer features to achieve higher accuracy and provide a rapid and non-destructive idea for judging its curing.

Chaotic dynamics and optimal therapeutic strategies for Caputo fractional tumor immune model in combination therapy.

In this paper, a Caputo fractional tumor immune model of combination therapy is established. First, the stability and biological significance of each equilibrium point are analyzed, and it is demonstrated that chaos may arise under specific conditions. Combined with the mathematical definition of Caputo fractional differentiation (CFD), it is found that there is a high correlation between the chaotic phenomenon of the patient's condition and the sensitivity of the patient to the change in the state of the day. The bifurcation threshold of each parameter is determined through numerical simulation, and the Hopf bifurcation of direct competition coefficient and inhibition coefficient between tumor cells and host healthy cells is elaborated upon in detail. Subsequently, a novel method combining optimal control theory with the particle swarm optimization (PSO) algorithm is proposed for the optimal control of the tumor immune model in combination therapy. Finally, the Adams-Bashforth-Moulton (ABM) prediction correction method is utilized in numerical simulations which demonstrate that the introduction of the CFD alters the model dynamics. Furthermore, these results indicate that fractional calculus can effectively be applied to tumor immune models better to elucidate complex chaotic dynamics of tumor cell evolution. Concurrently, the PSO can be successfully integrated with optimal control theory to address optimization challenges in cancer treatment.

A remaining useful life prediction method of aluminum electrolytic capacitor with adaptive degradation model selection

The degradation process of aluminum electrolytic capacitors(AECs) usually exhibits characteristics such as non-linearity and multi-stage. These degradation features lead to the difficulty to accurately predict the remaining useful life(RUL) of the whole degradation process of AECs. To address this, by dividing the capacitor degradation process into two stages, a two-stage RUL prediction method for AECs considering multiple degradation models is proposed in this paper.In the offline parameter estimation phase, the initial degradation model parameters of two stages are estimated using two-step maximum likelihood estimation combined with particle swarm optimization(PSO) algorithm. In the dynamic parameter updating phase, a sequential Bayesian method is used to update the model parameters. To select the optimal degradation model, an evaluation method based on historical RUL similarity is proposed to calculate the fitness of each model. Finally, the effectiveness of the method is verified on NASA’s accelerated degradation data set and several widely used methods are used for comparison. The experimental results show that the proposed method has higher accuracy, which proves the superiority of the method.

Predicting the productivity of fractured horizontal wells using few-shot learning

Predicting the productivity of multistage fractured horizontal wells plays an important role in exploiting unconventional resources. In recent years, machine learning (ML) models have emerged as a new approach for such studies. However, the scarcity of sufficient real data for model training often leads to imprecise predictions, even though the models trained with real data better characterize geological and engineering features. To tackle this issue, we propose an ML model that can obtain reliable results even with a small amount of data samples. Our model integrates the synthetic minority oversampling technique (SMOTE) to expand the data volume, the support vector machine (SVM) for model training, and the particle swarm optimization (PSO) algorithm for optimizing hyperparameters. To enhance the model performance, we conduct feature fusion and dimensionality reduction. Additionally, we examine the influences of different sample sizes and ML models for training. The proposed model demonstrates higher prediction accuracy and generalization ability, achieving a predicted R2 value of up to 0.9 for the test set, compared to the traditional ML techniques with an R2 of 0.13. This model accurately predicts the production of fractured horizontal wells even with limited samples, supplying an efficient tool for optimizing the production of unconventional resources. Importantly, the model holds the potential applicability to address similar challenges in other fields constrained by scarce data samples.

Parameter tuning for enhancing performance of a variant of particle swarm optimization algorithm

Parameter tuning for enhancing performance of a variant of particle swarm optimization algorithm

Multi-objective decision optimization design for building energy-saving retrofitting design based on improved grasshopper optimization algorithm

With the national emphasis on building energy efficiency planning, energy efficiency optimization in existing buildings requires renovation measures based on multi-objective factors. In order to get the optimal solution in the multi-objective decision-making of renovation, the study proposes a class of improved grasshopper optimization algorithms. The process employs a systematic methodology to identify an optimal energy renovation method, taking into account the specific characteristics of the building environment. It then classifies and formulates the energy reduction substitution items for building renovation, and finally, it synchronizes the cost of the renovation project as a measure for decision-making. The elite inverse strategy approach enhances the grasshopper optimization algorithm to facilitate the multi-objective decision-making process associated with building renovation measures. The results showed that the improved grasshopper optimization algorithm could achieve a decision accuracy of 98.8% for the test samples, which was 5.5% higher than the accuracy of the particle swarm optimization algorithm. Repeated run tests of the research algorithm for multi-objective decision making yielded a mean decision fitness value of 2.34×104 and a data extreme value of 0.38×104. Compared to other algorithms improved grasshopper optimization algorithm converged in a lower range of fitness values, which indicated that the algorithm worked well for multi-objective optimization and the model repeatability was good. The research algorithm was used to decide the energy efficient renovation planning of the building and the power consumption of the renovated power supply system was reduced by 23.7%-49.6%. This indicates that the renovated building has better energy efficiency and can provide a reliable technical direction for decision-making optimization of building energy efficiency renovation.

Hierarchical Optimal Dispatching of Electric Vehicles Based on Photovoltaic-Storage Charging Stations

Electric vehicles, known for their eco-friendliness and rechargeable–dischargeable capabilities, can serve as energy storage batteries to support the operation of the microgrid in certain scenarios. Therefore, photovoltaic-storage electric vehicle charging stations have emerged as an important solution to address the challenges posed by energy interconnection networks. However, electric vehicle charging loads exhibit notable randomness, potentially altering load characteristics during certain periods and posing challenges to the stable operation of microgrids. To address this challenge, this paper proposes a hierarchical optimal dispatching strategy based on photovoltaic-storage charging stations. The strategy utilizes a dynamic electricity pricing model and the adaptive particle swarm optimization algorithm to effectively manage electric vehicle charging loads. By decomposing the dispatching task into multiple layers, the strategy effectively solves the problems of the “curse of dimensionality” and slow convergence associated with large numbers of electric vehicles. Simulation results demonstrate that the strategy can effectively achieve peak shaving and valley filling, reducing the load variance of the microgrid by 24.93%, and significantly reduce electric vehicle charging costs and distribution network losses, with a reduction of 92.29% in electric vehicle charging costs and 32.28% in microgrid losses compared to unorganized charging. Additionally, this strategy can meet the travel demands of electric vehicle owners while providing convenient charging services.

Integratable high-efficiency achromatic metalens across the entire low-loss bands of optical fiber from 1260 to 1625 nm

A challenge in optic fiber is to control dispersion over the entire low-loss bands covering the O + E + S + C + L bands with integratable ultracompact devices, which inevitably limits the range of fiber-based applications. Metalens supplies a dynamic platform for correcting chromatic aberration of optical devices in a flexible, integratable, and ultracompact way. Hence, we propose a broadband achromatic metalens integrated on the end face of a single-mode fiber covering the entire low-loss wavelength region. Utilizing the particle swarm optimization algorithm, we have substantially mitigated the phase-compensated matching error in the achromatic scheme. It demonstrates that the metalens is achievable with achromatic aberration and focuses over the entire low-loss wavelength band with a high mean focusing efficiency of 84.55%. Furthermore, this device exhibits a remarkable capability to break through the diffraction limit of the output field. This work provides a theoretical basis for fiber-integrated achromatic metalens over the entire low-loss bands, which has promising applications in imaging, sensing, and optical communication.

Ship Power System Network Reconfiguration Based on Swarm Exchange Particle Swarm Optimization Algorithm

As one of the important components of a ship, the ship’s integrated power system is an important safeguard for ships. In order to improve the service life of the ship’s power grid, the power system should be able to realize rapid reconstruction to ensure continuous power supply of important loads when the ship is attacked or fails suddenly. Therefore, it is of vital importance to study the reconfiguration technology of the ship’s integrated power system to ensure that it can quickly and stably cope with all kinds of emergencies in order to guarantee the safe and reliable navigation of the ship. This paper takes the ship’s ring power system as the research object and sets up the maximum recovery load and the minimum number of switching operations. The load is divided uniformly and the generator efficiency is balanced for the reconstruction of comprehensive function. It also sets up the system capacity, topology, and branch current limitations of the constraints to establish a mathematical model. The load branch correlation matrix method is used for branch capacity calculation and generator efficiency equalization calculation, and the load backup power supply path matrix is added on the basis of the matrix to judge the connectivity of some loads before reconfiguration. In this paper, for the network reconfiguration of the ship circular power system, which is a discrete nonlinear problem with multiple objectives, multiple time periods, and multiple constraints, we choose to use the particle swarm algorithm, which is suitable for global optimization, with a simple structure and fewer parameters; improve the particle swarm algorithm using the swarm exchange strategy by setting up two main and auxiliary swarms for global and local search; and exchange some of the particles with the golden ratio in order to keep the diversity of the populations. The simulation results of the network reconfiguration of the ship power system show that the improved algorithm can solve the power system network reconfiguration problem more effectively and provide a feasible reconfiguration scheme in a shorter time compared with the chaotic genetic algorithm under the same fault case test, and it also proves that the use of the swarm exchange particle swarm algorithm greatly improves the performance of reconfiguring the power grid of the ship.

Fatigue Life Prediction of 2024-T3 Al Alloy by Integrating Particle Swarm Optimization—Extreme Gradient Boosting and Physical Model

The multi-parameter characteristics of the physical model pose a challenge to the fatigue life prediction of 2024-T3 aluminum (Al) alloy. In response to this issue, a parameter-solving method that integrates particle swarm optimization (PSO) with extreme gradient boosting (XGBoost) is proposed in this study. The fatigue performance and failure mechanism of the 2024-T3 Al alloy are analyzed. Furthermore, the fatigue life prediction physical model of the 2024-T3 Al alloy is established by using the energy method of fracture mechanics. The physical model incorporates critical physical parameters. Meanwhile, the PSO algorithm optimizes the hyperparameters of the XGBoost model based on fatigue data of the 2024-T3 Al alloy. Eventually, the optimized XGBoost model is used to solve the parameters of the physical model. Furthermore, the analytical equation of the fatigue life prediction model is obtained. This paper provides a new method for solving the parameters of the fatigue life prediction model, which reduces the error and cost of obtaining the model parameters in the experiment and shortens the time required.

Two-Stage Optimal Scheduling Strategy of Microgrid Distribution Network Considering Multi-Source Agricultural Load Aggregation

With the proposed “double carbon” target for the power system, large-scale distributed energy access poses a major challenge to the way the distribution grid operates. The rural distribution network (DN) will transform into a new local power system primarily driven by distributed renewable energy sources and energy storage, while also being interconnected with the larger power grid. The development of the rural DN will heavily rely on the construction and efficient planning of the microgrid (MG) within the agricultural park. Based on this, this paper proposes a two-stage optimal scheduling model and solution strategy for the microgrid distribution network with multi-source agricultural load aggregation. First, in the first stage, considering the flexible agricultural load and the market time-of-use electricity price, the economic optimization is realized by optimizing the operation of the schedulable resources of the park. The linear model in this stage is solved by the Lingo algorithm with fast solution speed and high accuracy. In the second stage, the power interaction between the MG and the DN in the agricultural park is considered. By optimising the output of the reactive power compensation device, the operating state of the DN is optimised. At this stage, the non-linear and convex optimization problems are solved by the particle swarm optimization algorithm. Finally, the example analysis shows that the proposed method can effectively improve the feasible region of safe operation of the distribution network in rural areas and improve the operating income of a multi-source agricultural load aggregation agricultural park.

Inclination information-aided circumferential deformation reconstruction error correction method for CFRP belt integrated with optical fiber sensor

In view of the problem that the distributed optical fiber-based deformation reconstruction method can produce serious accumulated errors, this paper developed a smart fiber optic sensor belt that employs a carbon-fiber composite material as the matrix and strain-sensing fiber optics as the sensing element and is based on the key-point dip angle information acquired by a high-precision tilt sensor. The method of in situ correction for the cumulative error of circumferential deformation was investigated, and the particle swarm optimization algorithm was adopted to perform in situ correction for the reconstructed circumferential deformation field of the sensor belt to reduce the cumulative measurement error of the circumferential deformation field. Simulations and indoor tests were systematically performed. After the correction, the errors of the simulation and indoor tests were reduced from 210.83 and 235.82 mm to 2.17 and 4.04 mm, respectively, which verified the effectiveness and accuracy of the aforementioned method.

Diagnosis and prognosis of soybean roaster failures using particle swarms

In industry, the monitoring and diagnosis of production processes are crucial issues in ensuring plant reliability, performance and quality. In particular, food processing operations, such as coffee roasting, are subject to numerous risks of failure that can impact on productivity and the quality of the final product. In this context, the main objective of this study was to develop an innovative method for the diagnosis and prognosis of failures in a coffee roasting process. The proposed method differs from standard approaches by using the particle swarm optimization (PSO) algorithm applied to the analysis of signatures of key process variables. This new approach has improved fault detection, with a recognition rate of over 90% for the main types of fault identified, such as heating problems, air obstructions or leaks. In addition to diagnostics, the method has also demonstrated its effectiveness in prognosticating the state of health of the process, with an average error on the prediction of remaining service life reduced to 15%, compared with 35% for fixed-threshold methods. This work has therefore enabled us to develop an innovative method offering superior performance to standard approaches for the diagnosis and prognosis of failures in the roasting process.

Digital watermarking algorithm for QR code based on hybrid PSOGWO optimization

Abstract With the rapid development of digital media, QR codes have become widely used as an important medium for information transmission. However, this also presents serious security challenges, such as frequent image infringement and inevitable compression and scaling issues during data transfer. These challenges directly threaten the effectiveness and integrity of image information, and effective protection measures must be taken. Under this background, digital watermarking technology comes into being as an innovative method to enhance security. This paper presents an innovative Hybrid Particle Swarm Optimization and Gray Wolf optimization (HPG) algorithm, which combines the advantages of PSO and overcomes the limitations of traditional GWO algorithm. The algorithm is further improved by using Bernoulli chaotic mapping and nonlinear convergence factor. The experiments focus on the global and local search balance of the algorithm and its ability to resist repeated scaling attacks. The results show that the nonlinear convergence factor of HPG algorithm slows down the iteration speed at the initial stage, strengthens the global search, and avoids falling into the local optimal. In the later stage, the iteration is accelerated to improve the local search speed and convergence efficiency, thus optimizing the performance of the algorithm and ensuring the safety and quality of image information. In addition, the algorithm has better performance in balancing imperceptibility and robustness of digital watermarking, and its peak signal-to-noise ratio (PSNR) is higher. Even with many scaling iterations, the normalized correlation (NC) value is still close to 1. Compared with the existing typical algorithms, HPG algorithm is more robust to repeated scaling attacks.

An Optimization Method for Multi-Robot Automatic Welding Control Based on Particle Swarm Genetic Algorithm

This paper introduces an optimization method for multi-robot automated control welding based on a Particle Swarm Genetic Algorithm (PSGA), aiming to address issues such as high costs, large footprint, and excessive production cycles in multi-robot welding production lines. The method first constructs a multi-axis robotic kinematic model to provide constraint conditions. Then, the PSO (particle swarm optimization) algorithm, which integrates penalty functions into the fitness evaluation, is used to determine the optimal welding path by simulating collective behavior within a group. The GA (genetic algorithm) encodes the position of the welding robot bases into chromosomes to find the optimal layout for coordinated control of multiple robots. The entire process is optimized according to welding standards and requirements. Additionally, a comprehensive production line performance estimation model was used to quantitatively analyze the new scheme. The results show that the optimized production line’s balance rate increased by 10%, the balance loss rate decreased by 10%, the smoothness index increased by 37.8%, the space costs reduced by 44.4%, the equipment demand reduced by 41.1%, the labor demand reduced by 50%, the total costs reduced by 10%, and the average product cycle time was reduced by 5.07 s. Finally, we tested the algorithm in various complex scenarios and compared its performance against mainstream algorithms within the context of this study. The results demonstrated that the optimized production line significantly improved efficiency while maintaining safety standards.

Designing broadband cross-polarization conversion metasurfaces using binary particle swarm optimization algorithm

Owing to their disadvantages of broadband discontinuity, infinite value, or incapability of distinguishing cross-polarization conversions from co-polarization conversions, the traditional linear polarization discrimination methods relating to the phase difference Δφ, the ellipticity angle β, or the axial ratio are inapplicable to the software-based optimal design of broadband cross-polarization conversion metasurfaces (CPMs) consisting of subblocks. Therefore, we introduce the pseudo ellipticity angle β' to characterize the cross-polarization conversion. And based upon the coding metasurfaces and β', this work first employs the Python-programmed binary particle swarm optimization algorithm to accomplish the optimal design of reflective broadband CPMs. Then, the obtained CPM is further simplified by reprocessing the relatively isolated subblocks, which results in the final CPM. The simulated results show that the final CPM realizes the broadband cross-polarization conversion with β' ≥ 0.4π and a relative bandwidth of 36.1 % from 11.66 GHz to 16.79 GHz. Moreover, the measured results are in excellent agreements with the simulated ones, which validates the proposed design method. It advances the broadband CPMs design from manual to automated method.

Enhancing federated learning with dynamic weight adjustment based on particle swarm optimization

Federated learning (FL) stands as a promising distributed machine learning approach today, allowing model training on local clients without data sharing. However, varied contributions among clients often impact the global model’s performance, while FL confronts challenges like communication overhead, data heterogeneity, and privacy concerns. In this paper, we introduce a novel federated learning server aggregation algorithm: the Federated Learning Algorithm with Optimized Weight Aggregation via Particle Swarm Optimization Algorithm (AdpFedPSO). This approach dynamically adjusts client model contribution weights based on their performance and stability, aiming to enhance global model accuracy, convergence speed, and make model aggregation smarter and more adaptable. Through experimental validation on real datasets, we find that AdpFedPSO enhances accuracy by about 15% on the 0.6-Dirichlet MNIST dataset, 7.3% on the FashionMNIST dataset, and 13.4% on the CIFAR-10 dataset compared to the traditional FL aggregation method, FedAvg. These results indicate that AdpFedPSO not only enhances the accuracy of the global model but also expedites the model’s convergence speed. Additionally, it demonstrates resilience across various levels of client numbers, participation rates, and client heterogeneity, providing valuable reference and guidance for the further development of FL technology. Moreover, the concept of employing the particle swarm optimization algorithm for FL model aggregation also offers new insights and directions for future research.

Geometric optimization to improve the performance of a new design of concentration‐based solar distiller using particle swarm optimization algorithm

AbstractSolar distillers are one of the oldest and simplest technologies for desalinating salt water using solar energy. The main problem is the low freshwater production compared to the amount of energy input from the sun. To overcome this problem, a solar distiller was developed using a parabolic trough concentrator to increase the freshwater yield. The geometry optimization of various parameters of the developed system was also studied using the particle swarm optimization (PSO) algorithm to obtain the optimal design and give the improved freshwater yield. The simulation is carried out based on the algorithm using the climatic condition data of Rabat City, Morocco. Numerical resolution of the energy balance equations was performed using MATLAB code. In terms of flexibility, speed, and global convergence, this method's final results were satisfactory. The maximum optimized freshwater yield using the PSO approach is 12.83 kg/m2 and the maximum optimized energy and exergy efficiency were about 204.7% and 34.3%, respectively. Furthermore, the results showed that the absorber basin accounts for the highest exergy destruction, 88.7% of the total optimized exergy destruction was found from exergy analysis.

Multi-objective optimization of switched reluctance motor driving electric vehicles based on vehicle operating condition

To improve the comprehensive performance of the switched reluctance motor (SRM) for electric vehicles (EVs) under actual driving conditions, a novel geometrical optimization method based on the time-varying phase current characteristics and the comprehensive indicator with justified weight coefficients is proposed in this paper. First, based on the established dynamic models of EV and SRM, the actual operating phase currents of the motor working under the New European Driving Cycle (NEDC) are extracted and classified to develop the representative optimization conditions. Then, considering the requirements of EV, five indicators are defined to evaluate the comprehensive performance of SRM, and a new multi-objective synchronization optimization function is proposed with five weight coefficients obtained by the statistical analysis method for the sample data of the indicators. Furthermore, the geometrical optimization for a four-phase 8/6 SRM is carried out by the combination of Particle Swarm Optimization (PSO) and BP neural network algorithms, after analyzing the effects of key geometrical parameters on the indicators. Finally, the work performance of the optimized SRM is evaluated and compared with that of the initial prototype, and the results show that the optimized SRM with the proposed multi-objective synchronization optimization method can improve the comprehensive indicator by 59.59%, and can significantly enhance the vehicle actual working economy by 50.74% under NEDC cycle.