Particle Swarm Optimization Model Research Articles

Recognition of Longitudinal Cracks on Slab Surfaces Based on Particle Swarm Optimization and eXtreme Gradient Boosting Model

Recognition of Longitudinal Cracks on Slab Surfaces Based on Particle Swarm Optimization and eXtreme Gradient Boosting Model

Towards optimized scheduling and allocation of heterogeneous resource via graph-enhanced EPSO algorithm

Efficient allocation of tasks and resources is crucial for the performance of heterogeneous cloud computing platforms. To achieve harmony between task completion time, device power consumption, and load balance, we propose a Graph neural network-enhanced Elite Particle Swarm Optimization (EPSO) model for collaborative scheduling, namely GraphEPSO. Specifically, we first construct a Directed Acyclic Graph (DAG) to model the complicated tasks, thereby using Graph Neural Network (GNN) to encode the information of task sets and heterogeneous resources. Then, we treat subtasks and independent tasks as basic task units while considering virtual or physical devices as resource units. Based on this, we exploit the performance adaptation principle and conditional probability to derive the solution space for resource allocation. Besides, we employ EPSO to consider multiple optimization objectives, providing fine-grained perception and utilization of task and resource information. It also increases the diversity of particle swarms, allowing GraphEPSO to adaptively search for the global optimal solution with the highest probability. Experimental results demonstrate the superiority of our proposed GraphEPSO compared to several state-of-the-art baseline methods on all evaluation metrics.

Predicting air quality index using attention hybrid deep learning and quantum-inspired particle swarm optimization

Air pollution poses a significant threat to the health of the environment and human well-being. The air quality index (AQI) is an important measure of air pollution that describes the degree of air pollution and its impact on health. Therefore, accurate and reliable prediction of the AQI is critical but challenging due to the non-linearity and stochastic nature of air particles. This research aims to propose an AQI prediction hybrid deep learning model based on the Attention Convolutional Neural Networks (ACNN), Autoregressive Integrated Moving Average (ARIMA), Quantum Particle Swarm Optimization (QPSO)-enhanced-Long Short-Term Memory (LSTM) and XGBoost modelling techniques. Daily air quality data were collected from the official Seoul Air registry for the period 2021 to 2022. The data were first preprocessed through the ARIMA model to capture and fit the linear part of the data and followed by a hybrid deep learning architecture developed in the pretraining–finetuning framework for the non-linear part of the data. This hybrid model first used convolution to extract the deep features of the original air quality data, and then used the QPSO to optimize the hyperparameter for LSTM network for mining the long-terms time series features, and the XGBoost model was adopted to fine-tune the final AQI prediction model. The robustness and reliability of the resulting model were assessed and compared with other widely used models and across meteorological stations. Our proposed model achieves up to 31.13% reduction in MSE, 19.03% reduction in MAE and 2% improvement in R-squared compared to the best appropriate conventional model, indicating a much stronger magnitude of relationships between predicted and actual values. The overall results show that the attentive hybrid deep Quantum inspired Particle Swarm Optimization model is more feasible and efficient in predicting air quality index at both city-wide and station-specific levels.

Estimating soil moisture content in citrus orchards using multi-temporal sentinel-1A data-based LSTM and PSO-LSTM models

Soil moisture content is a vital variable in agricultural, hydrological, ecological and climatological processes. However, susceptible to soil type, soil structure, topography, vegetation and human activities, soil moisture content exhibits strong spatial heterogeneity in spatial distribution, which makes it difficult to accurately estimate the soil moisture content distribution information at a large scale using conventional methods. To solve the problem, this study proposed a novel hybrid model (PSO-LSTM) based on the particle swarm optimization (PSO) and long short-term memory (LSTM) network model to accurately predict soil moisture content at a large scale. Five different input combinations were constructed based on the vertical polarization (VV) and cross-polarization (VH) of multi-phase Sentinel-1A data, and the soil moisture content at depths of 5 cm, 10 cm, 20 cm and 40 cm in citrus orchards were estimated using the standalone LSTM and hybrid PSO-LSTM models. The results showed that the estimation accuracy of the hybrid PSO-LSTM model was greater than that of the standalone LSTM model at different depths, with the normalized root mean square error (NRMSE) of 4.568–11.023 % and 18.056–30.156 %, respectively. With the VV polarization as the only inputs, the PSO-LSTM model obtained high prediction accuracy, with the normalized root mean square error (NRMSE) of 5.458–10.125 %, respectively. Therefore, the PSO-LSTM model with VV polarization input was recommended to estimate the soil moisture content at different depths in citrus orchards, which provides important data for decision-making on distributed precision irrigation at a large scale.

Evaluation of multiple machine learning models for ASR expansion of concrete

Machine learning algorithms (MLA) show promise in predicting alkali-silica reaction (ASR) expansion. Nevertheless, the predictive performance of different machine learning algorithms (MLAs) varies across various engineering scenarios and datasets. Given that, this study was devoted to constructing an appropriate predictive model for ASR expansion of concrete. Multiple MLAs including evolutionary-based, support vector-based, assembly-based, and neural network-based algorithms, were employed to establish predictive models. An optimization technique, the particle swarm optimization algorithm, was also utilized and integrated with the aforementioned MLA models to effectively search for optimal hyperparameters and topological structures. The predictive performance was evaluated using statistical methods, which showed that the extreme gradient boosting (XGBoost) model had the best fitting goodness among the standard algorithms, with an R2 value of 0.9695. Moreover, the Particle Swarm Optimization (PSO) model significantly improved the predictive performance of all Machine Learning Algorithm (MLA) models. The error distribution analysis was then performed. There are fewer large errors in the predicted values of the PSO-XGBoost model. Monte Carlo simulation and probability distribution functions were used to thoroughly analyze the stability of each model after multiple independent runs. The results show that all models have excellent stability. The PSO-XGBoost model performed the best and was subsequently employed to conduct feature analysis to determine the significance of each input parameter and capture the underlying evidence of ASR expansion.

Optimizing Software Defect Prediction Models: Integrating Hybrid Grey Wolf and Particle Swarm Optimization for Enhanced Feature Selection with Popular Gradient Boosting Algorithm

Software defects, also referred to as software bugs, are anomalies or flaws in computer program that cause software to behave unexpectedly or produce incorrect results. These defects can manifest in various forms, including coding errors, design flaws, and logic mistakes, this defect have the potential to emerge at any stage of the software development lifecycle. Traditional prediction models usually have lower prediction performance. To address this issue, this paper proposes a novel prediction model using Hybrid Grey Wolf Optimizer and Particle Swarm Optimization (HGWOPSO). This research aims to determine whether the Hybrid Grey Wolf and Particle Swarm Optimization model could potentially improve the effectiveness of software defect prediction compared to base PSO and GWO algorithms without hybridization. Furthermore, this study aims to determine the effectiveness of different Gradient Boosting Algorithm classification algorithms when combined with HGWOPSO feature selection in predicting software defects. The study utilizes 13 NASA MDP dataset. These dataset are divided into testing and training data using 10-fold cross-validation. After data is divided, SMOTE technique is employed in training data. This technique generates synthetic samples to balance the dataset, ensuring better performance of the predictive model. Subsequently feature selection is conducted using HGWOPSO Algorithm. Each subset of the NASA MDP dataset will be processed by three boosting classification algorithms namely XGBoost, LightGBM, and CatBoost. Performance evaluation is based on the Area under the ROC Curve (AUC) value. Average AUC values yielded by HGWOPSO XGBoost, HGWOPSO LightGBM, and HGWOPSO CatBoost are 0.891, 0.881, and 0.894, respectively. Results of this study indicated that utilizing the HGWOPSO algorithm improved AUC performance compared to the base GWO and PSO algorithms. Specifically, HGWOPSO CatBoost achieved the highest AUC of 0.894. This represents a 6.5% increase in AUC with a significance value of 0.00552 compared to PSO CatBoost, and a 6.3% AUC increase with a significance value of 0.00148 compared to GWO CatBoost. This study demonstrated that HGWOPSO significantly improves the performance of software defect prediction. The implication of this research is to enhance software defect prediction models by incorporating hybrid optimization techniques and combining them with gradient boosting algorithms, which can potentially identify and address defects more accurately

MI-OPTNET: AN OPTIMIZED DEEP LEARNING FRAMEWORK FOR MYOCARDIAL INFARCTION DETECTION

The conventional means of myocardial infarction (MI) detection using a 12-lead electrocardiogram (ECG) system include a pretrained network and machine learning interpretation of the complex ECG signals. They are computationally inefficient and demand high-performance hardware. Here, for the first time, we introduce an effective framework (MI-OptNet) using the particle swarm optimization model (PSO) in the design of a lightweight hybrid network combining convolutional neural network (CNN)-long short terms memory (LSTM) for MI and normal ECG detection. We optimized important design and training parameters based on limb leads’ signals and identified leads III and VI as the best ECG leads for the task based on their high classification performance ranging between 80 – 90 %, suggesting that they may provide more information about MI than the others. The other strategy of fusing the scores from all models at the decision level achieved the best result with a 10 % increase in the evaluated metrics. Our findings support the flexibility and adaptability of our framework for the design process using minimal computer efforts. We concluded that this approach may be used for other classification problems to assist engineers and designers in efficient decision-making and to solve complex signal classification and recognition problems.

An expert system for highway construction: Multi-objective optimization using enhanced particle swarm for optimal equipment management

Expert systems play a crucial role in decision-making across various industries. This study introduces a novel expert system employing a tailored multi-objective optimization (MOO) model to address the intricate demands of highway projects. Integrating an advanced Enhanced Particle Swarm Optimization (IPSO) strategy, our model emphasizes key operations like excavation, hauling, grading, and compaction. Considering factors such as equipment count, velocity, and capacity, the system provides a comprehensive set of optimal solutions and reveals the Pareto frontier. In benchmarking our Improved Particle Swarm Optimization (IPSO) model against established methods, such as Genetic Algorithms (GA) by various researchers and the Guided Population Archive Whale Optimization Algorithm (GPAWOA), our approach significantly excelled. Our model demonstrated a 35.4%-time reduction and a 39.1% cost reduction while enhancing operational quality—starkly contrasting the modest improvements seen with other methods. This showcases the IPSO model's robustness in optimizing construction equipment utilization beyond current standards. Functioning as a decision-support tool, the expert system aids stakeholders in selecting optimal equipment setups, considering diverse attributes from equipment specifications to speed and volume. This application is exemplified through a real-world highway construction case study. The Case Study showcases the proposed model's remarkable impact, yielding a 35.4% time saving and a 16.8% cost decrease with Optimal Solution (I). In contrast, Optimal Solution (III) required 144.6% more time yet reduced costs by 39.1%. Furthermore, Optimal Solution (II) achieved a 4.6%-time reduction and a 32.4% cost decrease, demonstrating the system's versatility in managing constraints and optimizing decision-making processes across various project stages.

Research on multi-beam line measurement based on theoretical derivation and particle swarm optimization model

Starting from the geometric model formed by the multi-beam line measuring device for seabed mapping, this paper makes geometric analysis of the two-dimensional plane and three-dimensional map respectively and establishes the mathematical expressions of the relevant parameters, and calculates the mathematical function relationship of the relevant parameters according to the motion of the surveying ship on the sea level and the distribution of the survey lines. Two and three dimensional models are established to improve the accuracy of surveying submarine depth and the utilization rate of multi-beam line measuring device. By using geometric relation in two-dimensional plane, linear function relation is established and related parameters are solved. Based on the working principle of analyzing the solution method of the full coverage shortest path, a benchmark is established, the measured line is perpendicular to the sea boundary, the parameter values at this time are calculated, the dynamic programming model is established, the local optimal solution is obtained by particle swarm optimization algorithm, and the optimal solution is obtained by cyclic traversal. The minimum number of survey lines N and the minimum total measurement length L are obtained

Structural optimization of new media communication culture industry on the impact of digital innovation on marine economic growth

This study investigates the impact of digital innovation on the growth of the marine economy by optimizing the structure of the new media communication culture industry. Through the simulation of the particle swarm optimization (PSO) and Back Propagation (BP) computational network model, the Gross Domestic Production (GDP) of the marine economic zone is predicted, and the prediction effect of the PSO-BP computational network model on multivariate spatiotemporal transitions is further verified. The results show that the PSO-BP model has less prediction variance and a better fit than the BP model. The analysis of the joint prediction model reveals that there are differences in the publicity effects of different self-media modes in various types of sea areas. In terms of the economic peak of the overall data, Bilibili has the best publicity effect, followed by WeChat, Weibo, and Shake. The results show that the trend of macroeconomic indicators and the size of values in different regions affect the prediction effect. Region A has a higher annual average rate of change of macroeconomic indicators and has a better prediction effect. Region B has a faster macroeconomic development and has a more fluctuating prediction effect. Regions C and D have their advantages and disadvantages of the prediction effect under the self-media model.

Multistrategy Fusion Particle Swarm for Dynamic Economic Dispatch Optimization of Renewable Energy Sources

This paper presents a multistrategy fusion particle swarm optimization model for dynamic economic dispatching of renewable energy in distribution networks. The objective is to minimize active network losses and system voltage deviation while considering the integration of distributed energy sources and static reactive power compensators. The algorithm incorporates specific strategies, including a particle position change strategy based on the midpipeline convergence approach, a strategy for generating exploding particles near the optimal particles, and a particle velocity update strategy relying on the global optimal particle position. The inertia weights and particle position update methods of the simplified particle swarm optimization algorithm are also utilized. Simulation experiments are conducted on an IEEE 33 bus radial distribution system, demonstrating the effective optimization of system losses while ensuring system voltage stability. This research contributes to the scientific understanding of renewable energy integration in distribution networks and its economic dispatching.

Predicting Biochemical Oxygen Demand at the Inlet of Al-Rustumiya Wastewater Treatment Plant Using Different Mathematical Techniques

Water quality planning relies on Biochemical Oxygen Demand BOD. BOD testing takes five days. The Particle Swarm Optimization (PSO) is increasingly used for water resource forecasting. This work designed a PSO technique for estimating everyday BOD at Al-Rustumiya wastewater treatment facility inlet. Al-Rustumiya wastewater treatment plant provided 702 plant-scale data sets during 2012-2022. The PSO model uses the daily data of the water quality parameters, including chemical oxygen demand (COD), chloride (Cl-), suspended solid (SS), total dissolved solids (TDS), and pH, to determine how each variable affects the daily incoming BOD. PSO and multiple linear regression (MLR) findings are compared, and their performance is evaluated using mean square error, relative absolute mistake, and coefficient of determination. PSO utilised COD, TDS, SS, pH, and Cl- as inputs, generating a mean square error of 1029.10, an average absolute relative error of 9.41%, and a coefficient of determination of 0.89. Comparisons demonstrated that the PSO model could accurately calculate the daily BOD at Al-Rustumiya wastewater treatment plant's inlet.

Video Deepfake classification using particle swarm optimization-based evolving ensemble models

The recent breakthrough of deep learning based generative models has led to the escalated generation of photo-realistic synthetic videos with significant visual quality. Automated reliable detection of such forged videos requires the extraction of fine-grained discriminative spatial-temporal cues. To tackle such challenges, we propose weighted and evolving ensemble models comprising 3D Convolutional Neural Networks (CNNs) and CNN-Recurrent Neural Networks (RNNs) with Particle Swarm Optimization (PSO) based network topology and hyper-parameter optimization for video authenticity classification. A new PSO algorithm is proposed, which embeds Muller's method and fixed-point iteration based leader enhancement, reinforcement learning-based optimal search action selection, a petal spiral simulated search mechanism, and cross-breed elite signal generation based on adaptive geometric surfaces. The PSO variant optimizes the RNN topologies in CNN-RNN, as well as key learning configurations of 3D CNNs, with the attempt to extract effective discriminative spatial-temporal cues. Both weighted and evolving ensemble strategies are used for ensemble formulation with aforementioned optimized networks as base classifiers. In particular, the proposed PSO algorithm is used to identify optimal subsets of optimized base networks for dynamic ensemble generation to balance between ensemble complexity and performance. Evaluated using several well-known synthetic video datasets, our approach outperforms existing studies and various ensemble models devised by other search methods with statistical significance for video authenticity classification. The proposed PSO model also illustrates statistical superiority over a number of search methods for solving optimization problems pertaining to a variety of artificial landscapes with diverse geometrical layouts.

An improved optimization method combining particle swarm optimization and dimension reduction kriging surrogate model for high-dimensional optimization problems

An improved optimization method is proposed which combines the particle swarm optimization (PSO) algorithm with the dimension reduction kriging surrogate model (DK), namely PSO + DK. In this method, a surrogate model is dynamically constructed and updated between the lower dimensional principal components and the response, instead of between the high-dimensional design variables and the response as in traditional methods. The key point of DK is that the principal components analysis (PCA) is integrated with the active learning kriging surrogate model (AK). Since PCA can reduce the dimension effectively, DK makes surrogate model construction possible for complex high-dimensional optimization problems. Numerical examples and four classical engineering problems are presented to validate the effectiveness of the proposed method. The results show that the proposed method can decrease the computational cost significantly while guaranteeing the precision compared with PSO and PSO + AK for high-dimensional optimization problems.

Optimizing Lithium-Ion Battery Modeling: A Comparative Analysis of PSO and GWO Algorithms

In recent years, the modeling and simulation of lithium-ion batteries have garnered attention due to the rising demand for reliable energy storage. Accurate charge cycle predictions are fundamental for optimizing battery performance and lifespan. This study compares particle swarm optimization (PSO) and grey wolf optimization (GWO) algorithms in modeling a commercial lithium-ion battery, emphasizing the voltage behavior and the current delivered to the battery. Bio-inspired optimization tunes parameters to reduce the root mean square error (RMSE) between simulated and experimental outputs. The model, implemented in MATLAB/Simulink, integrates electrochemical parameters and estimates battery behavior under varied conditions. The assessment of terminal voltage revealed notable enhancements in the model through both the PSO and GWO algorithms compared to the non-optimized model. The GWO-optimized model demonstrated superior performance, with a reduced RMSE of 0.1700 (25 °C; 3.6 C, 455 s) and 0.1705 (25 °C; 3.6 C, 10,654 s) compared to the PSO-optimized model, achieving a 42% average RMSE reduction. Battery current was identified as a key factor influencing the model analysis, with optimized models, particularly the GWO model, exhibiting enhanced predictive capabilities and slightly lower RMSE values than the PSO model. This offers practical implications for battery integration into energy systems. Analyzing the execution time with different population values for PSO and GWO provides insights into computational complexity. PSO exhibited greater-than-linear dynamics, suggesting a polynomial complexity of O(nk), while GWO implied a potential polynomial complexity within the range of O(nk) or O(2n) based on execution times from populations of 10 to 1000.

Predicting Confinement Effect of Carbon Fiber Reinforced Polymers on Strength of Concrete using Metaheuristics-based Artificial Neural Networks

This article deals with the study of predicting the confinement effect of carbon fiber reinforced polymers (CFRPs) on concrete cylinder strength using metaheuristics-based artificial neural networks. A detailed database of 708 CFRP confined concrete cylinders is developed from previously published research with information on eight parameters, including geometrical parameters like the diameter (d) and height (h) of a cylinder, unconfined compressive strength of concrete (f_co^'), thickness (nt), the elastic modulus of CFRP (Ef), unconfined concrete strain (?_co), confined concrete strain (?_cc) and the ultimate compressive strength of confined concrete (f_cc^'). Three metaheuristic models are implemented, including particle swarm optimization (PSO), grey wolf optimizer (GWO), and bat algorithm (BA). These algorithms are trained on the data using an objective function of mean square error, and their predicted results are validated against experimental studies and finite element analysis. The study shows that the hybrid PSO model predicted the strength of CFRP-confined concrete cylinders with a maximum accuracy of 99.13% and GWO predicted the results with an accuracy of 98.17%. The high accuracy of axial compressive strength predictions demonstrated that these prediction models are a reliable solution to the empirical methods. The prediction models are especially suitable for avoiding full-scale, time-consuming experimental tests that make the process quick and economical.

Impact of initialization of a modified particle swarm optimization on cooperative source searching

Swarm robotic is well known for its flexibility, scalability and robustness that make it suitable for solving many real-world problems. Source searching which is characterized by complex operation due to the spatial characteristic of the source intensity distribution, uncertain searching environments and rigid searching constraints is an example of application where swarm robotics can be applied. Particle swarm optimization (PSO) is one of the famous algorithms have been used for source searching where its effectiveness depends on several factors. Improper parameter selection may lead to a premature convergence and thus robots will fail (i.e., low success rate) to locate the source within the given searching constraints. Additionally, target overshooting and improper initialization strategies may lead to a nonoptimal (i.e., take longer time to converge) target searching. In this study, a modified PSO and three different initializations strategies (i.e., random, equidistant and centralized) were proposed. The findings shown that the proposed PSO model successfully reduce the target overshooting by choosing optimal PSO parameters and has better convergence rate and success rate compared to the benchmark algorithms. Additionally, the findings also indicate that the random initialization give better searching success compared to equidistant and centralize initialization.

Fuel Combination Optimization Model of Thermal Power Plant Based on New Particle Swarm Optimization Algorithm

Influenced by the unbalanced state of particle swarm in the process of fuel combustion in thermal power plants, the fuel cost in the thermal power generation stage is relatively high. Therefore, a new particle swarm optimization model for fuel combination in thermal power plants is proposed. Combined with the combustion properties of different fuels, from the point of view of particle swarm optimization, in the process of carrying out specific particle swarm optimization simulation, the original particle swarm optimization algorithm is improved adaptively. A new particle swarm optimization algorithm is constructed by coupling it with a multiphase turbulence model. The fuel combustion performance of the power plant is analyzed by using its coupling. The optimization model of fuel combination in the thermal power plant is constructed by maximizing the energy release of fuel as the core, and the state of the fluid-particle field is taken as the constraint condition. In the test results, the design of the fuel combination optimization model can fully improve the energy release degree of fuel and reduce fuel consumption under the same power generation demand, which has a positive effect on power generation cost control.

Prediction of particle mixing in rotary drums by a DEM data-driven PSO-SVR model

Particle mixing in rotary drums is of significant industrial importance, but very complex. Detailed simulation can be achieved using the discrete element method (DEM), but the computational time cost is enormous. Therefore, we combined machine learning with DEM simulations and established a DEM data-driven particle swarm optimization and support vector regression (PSO-SVR) model to predict mixing time and mixing degree at steady mixing state for binary sphere mixtures in horizontal rotary drums with four independent variables: revolution frequency, particle density ratio, particle size ratio, and drum length. After hyperparameter tuning by PSO on a validation set of 25 simulations, the SVR model was trained on 81 DEM simulations. Testing on another 25 simulations yielded excellent results with R2 = 0.95 for mixing time and R2 = 0.90 for mixing degree. These results indicate that the PSO-SVR model is suitable for rapid predictions of particle mixing in rotary drums and other particle processing equipment.

Remote Sensing Image Fusion Based on Particle Swarm Optimization and Adaptive Injection Model

Remote Sensing Image Fusion Based on Particle Swarm Optimization and Adaptive Injection Model