Particle Size Distribution Analysis Research Articles

New insights into the catalyst and cocatalyst pre‐contact process in ethylene copolymerization

AbstractThe influence of pre‐contacting time and temperature as well as mixing intensity on polyethylene copolymerization has been investigated employing DSC, rotational rheometry tests, as well as particle size distribution analysis. For this purpose, a commercial‐supported Ziegler–Natta catalyst has been pre‐contacted with Teal as cocatalyst under different time, temperature, and stirring speed followed by similar polymerization process. It was found that the increase in mixing intensity has no impact on rheological properties; it causes increase in crystallinity percentage of polymer due to better distribution of active centers. Moreover, the pre‐contacting time represents the most impact on catalyst activity and rheology of polymer powder while the pre‐contacting temperature changes is mostly effective on controlling the morphology of polymer. Additionally, the results reveal that 10‐min pre‐contacting of catalyst and Teal under 10°C and stirring speed of 500 rpm was accompanied by highest catalyst activity and lowest content of fine particles.Highlights Pre‐activation was studied under different time and temperature. Adjusting pre‐contacting time influences the polymer morphology. Pre‐contacting under lower temperature results in narrower molecular weight distribution.

Isolation and Characterization of Cellulose Nanofibrils (CNF) from Dates by-Product via Citric Acid Hydrolysis

Industrial residues that are not optimally utilized are removed by burning, landfilling, or dumping, which can threaten the environment and health. In fact, part of this agro-industrial waste still has content that has the potential to become raw material for value-added other industries. Dates by-product as residue of the fiber-rich fruit industry have the potential to be a source of nanocellulose. This study aims to obtain nanofibril cellulose (CNF) isolates from dates by-product via citric acid hydrolysis, and investigate the effect of acid concentration on the unknown dates by-product CNF isolate characteristics. Pretreatment such as delignification and bleaching is needed to obtain cellulose isolate with high purity. Furthermore, acid hydrolysis, centrifugation, and sonication are performed to obtain CNF. CNF isolates are characterized by the analysis of particle size distribution, morphology, and crystallinity. Analysis of functional groups and lignocellulose content test confirm that lignin and hemicellulose are degraded during isolation. The particle size distribution measurement shows that the greater the acid concentration, the smaller the CNF size and the better the size uniformity. The morphology of the CNF obtained is net-like fibers. The degree of crystallinity shown decreases with increasing acid concentration. This study revealed that different citric acid concentrations can result in different characteristics of CNF isolates.

Waste From Alwar Quartzite (A Global Heritage Stone From Rajasthan - India) As Secondary Raw Materials for Cementitious Tile Adhesives

Waste deriving from quarrying operations of natural stone material retains almost all the mineralogical and compositional characteristics of the original material, for such reason this research aimed to test prototypes cementitious tile adhesives made up recycling the Alwar Quartzite waste, used as fine and ultra-fine aggregate. Particle size distribution analysis, along with X-ray diffractometry, X-ray fluorescence and Scanning Electron Microscopy were carried out to characterize the waste. Experimental research involved the mix-designing of three dough formulations (a regular one [N], a latex added [L] and a fast-setting [R]) tested by using different types of tiles: (i) polished metal plates, (ii) ceramic tiles and (iii) rough natural stone slabs. Fresh prepared doughs were firstly tested for thixotropy achieving high values (ranging 82–93%) and cured for normative requested time after being stuck on a concrete support as reported in European UNI standard regulations. After respective curing time, adhesives technical performances were evaluated by the Pull-Off test obtaining results for Class 1 (N and R) and Class 2 (L) adhesives with high initial tensile adhesive strength. Experimental results carried out in this research proved the possibility to use huge amounts of waste coming from Indian stone industry in cementitious tile adhesives sector without compromising technical performances, proposing itself as an alternative method to landfill disposal for this waste.

Enhanced functionalization of superparamagnetic Fe3O4 nanoparticles for advanced drug enrichment and separation applications

Backgroundsuperparamagnetic ferroferric oxide (Fe3O4) nanoparticles can be extensively functionalized for applications in drug enrichment and separation. Their high magnetic responsiveness and controllable surface modification enable rapid drug enrichment and separation under external magnetic fields. This study aimed to enhance the application potential of superparamagnetic Fe3O4 nanoparticles in the field of drug enrichment and separation by functionalizing these nanoparticles to improve their biocompatibility and targeting capabilities.Methodssuperparamagnetic Fe3O4 nanoparticles functionalized with dopamine were synthesized using benzyl alcohol as the solvent and iron acetylacetonate as the precursor. The dopamine-functionalized superparamagnetic iron oxide nanoparticles were used to analyze protein enrichment and separation. Characterization of the nanoparticles was conducted, including analysis of particle size distribution, Zeta potential, and fluorescence spectra using a fluorescence spectrophotometer.Resultsthe Fe3O4 nanoparticles maintained high magnetism from the original material and exhibited uniform particle size distribution and stable Zeta potential. The saturation magnetization of dopamine-functionalized superparamagnetic Fe3O4 nanoparticles showed no significant difference compared to before coating, indicating minimal influence of dopamine on the internal magnetic core of the nanoparticles. The Fe3O4 nanoparticles demonstrated good biocompatibility and stability.Conclusionfunctionalization of superparamagnetic Fe3O4 nanoparticles significantly enhances their efficiency in drug enrichment and separation processes, suggesting broad applications in the pharmaceutical industry.

In situ self-assembly of artesunate-β-cyclodextrin supramolecular nanomedicine as potential anti-cancer prodrug

Supramolecular nanomedicines have drawn great interest in cancer therapy, but their potential immunotoxicities restrict application in clinical translation. Herein, we constructed a supramolecular nanomedicine CD-Artesunate (CD-ATS) in situ by supramolecular polymerization and orthogonal self-assembly. The nanostructure was meticulously characterized using 1D and 2D Nuclear Magnetic Resonance (NMR) spectroscopy, Mass spectrometry, Transmission Electron Microscopy (TEM), and particle size distribution analysis. β-cyclodextrin (β-CD) hosts are conjugated with artesunate (ATS) by click chemistry to improve the solubility and antitumor activity of ATS. Supramolecular nanomedicine was prepared through orthogonal self-assembly driven by host−guest complexation and hydrogen bonds. The results showed that the aqueous solubility of CD-ATS was 30 times better than that of free ATS. Furthermore, CD-ATS displayed a superior antitumor effect against HCT116 tumor cells compared to the first-line drug Taxol. This enhanced effect was attributed to the induction of excessive reactive oxygen species (ROS) generation, which subsequently triggered apoptosis.

Structural changes and in vitro bioaccessibility of CPP-febisgly complexes: Dependence on iron load

The effect of casein phosphopeptides (CPP) and ferrous bisglycinate (FebisGly) at different ratios (1:20, 1:10, and 1:5 w/w) on iron supplementation was investigated. The in vitro bioaccessibility, structural changes, antioxidant activity, and the effect of absorption inhibitors were also explored. The results demonstrated that CPP enhanced the bioaccessibility of FebisGly by 68.72 % ± 0.18 % and increased the β-sheet content from 21.60 % ± 0.23 % to 67.92 % ± 0.12 %, forming a stable secondary structure. The particle size distribution (PSD) and rheological analyses indicated that CPP significantly contributed to the formation of chelated irons, resulting in a uniform PSD and enhanced viscoelasticity. Moreover, it prolonged the gastric emptying time, reducing gastric irritation further. The carboxyl and amino groups in the CPP molecules participated in chelation reaction, improved the antioxidant activity, and competed with phytic acid, tannic acid, and cellulose for iron. Overall, these results laid a foundation for developing novel iron supplementation strategies.

Development of Mixed Micelles for Enhancing Fenretinide Apparent Solubility and Anticancer Activity Against Neuroblastoma Cells.

The purpose of the study was to evaluate the suitability of mixed micelles prepared with D-α-tocopheryl polyethylene glycol succinate (TPGS) and 1,2- distearoyl-glycero-3-phosphoethanolamine-N-[methoxy(polyethyleneglycol)-2000] (DSPE-PEG) to encapsulate the poorly soluble anticancer drug fenretinide (4-HPR). After assaying the solubilization ability of the surfactants by the equilibrium method, the micelles were prepared using the solvent casting technique starting from different 4-HPR:TPGS: DSPE-PEG w/w ratios. The resulting formulations were investigated for their stability under storage conditions and upon dilution, modelling the reaching of physiological concentrations after intravenous administration. The characterization of micelles included the determination of DL%, EE %, particle size distribution, Z-potential, and thermal analysis by DSC. The cytotoxicity studies were performed on HTLA-230 and SK-N-BE-2C neuroblastoma cells by the MTT essay. The colloidal dispersions showed a mean diameter of 12 nm, negative Zeta potential, and a narrow dimensional distribution. 4-HPR was formulated in the mixed micelles with an encapsulation efficiency of 88% and with an increment of the apparent solubility of 363-fold. The 4-HPR entrapment remained stable up to the surfactants' concentration of 2.97E-05 M. The loaded micelles exhibited a slow-release behaviour, with about 28% of the drug released after 24 h. On the most resistant SK-N-BE-2C cells, the encapsulated 4-HPR was significantly more active than free 4-HPR in reducing cell viability. Loaded micelles demonstrated their suitability as a new adjuvant tool potentially useful for the treatment of neuroblastoma.

Removal of Pb(II) pollution by algae-Fe-Ni magnetic nanocomposite

A magnetic nanocomposite material was synthesized by combining Chaetomorpha Algae with a Fe–Ni alloy. The dry algae, Fe, and Ni were mechanically alloyed using a ball milling technique in an argon atmosphere. The resulting Algae-Fe-Ni Magnetic Nanocomposite (AFNMN) was characterized using various analytical techniques, including particle size distribution (PSD) analysis, Brunauer-Emmett-Teller (BET) surface area analysis, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), vibrating sample magnetometry (VSM), atomic absorption spectroscopy (AAS), and Fourier transform infrared (FTIR) spectroscopy. Multiple isotherm models were employed to study the adsorption of Pb(II) ions onto the AFNMN material. Density functional theory (DFT) was applied to predict the most stable amino acids for the removal of Pb(II) pollutants from a set of 14 amino acids. To optimize the Pb(II) uptake performance, three key experimental parameters were fine-tuned: pH, temperature, and reactor vessel geometry. Four different optimization methods were utilized, including response surface methodology (RSM), fuzzy logic, adaptive network-based fuzzy inference system (ANFIS), and artificial neural network genetic algorithms (ANN-GA). Additionally, a heat transfer simulation was conducted to determine the optimal vessel positions for achieving the desired temperature variations within the reactor during the adsorption process.

Alginate-millet starch composite matrices as novel carriers for controlled delivery of grape seed polyphenols: Preparation, characterization, and in vitro release behaviour

Grape seed polyphenols (GSP) were encapsulated in alginate-modified millet starch composite matrix using internal gelation. Millet starch was modified using ultrasound (US) for 10, 20, 30, and 40 min. The application of US reduced the long-range order and increased the short-range order of starch, consequently increasing its solubility. FESEM analysis revealed that US-treatment induced fissures and grooves on the surface of starch granules and disintegrated the starch particles. Particle size distribution analysis confirmed a significant reduction in mean particle size. US-treatment facilitated enhanced alginate-starch interactions owing to an increased surface area and improved hydrogen bonding, as corroborated by FTIR, XRD, and DSC results. The composite microencapsulates prepared from 40 min US-treated starch demonstrated the highest encapsulation efficiency (89.20 ± 1.10 %), heat and UV-light stability, and delayed GSP release in simulated gastrointestinal fluids. The best fit for the release behaviour of GSP from the composite microencapsulates was observed with Peppas-Sahlin model.

Optimization and Characterization of PEG Extraction Process for Tartary Buckwheat-Derived Nanoparticles.

Plant-derived edible nanovesicles serve as crucial nanocarriers for targeted delivery of bioactive substances, including miRNAs and phytochemicals, to specific tissues. They have emerged as a significant focus in precision nutrient delivery research. In this study, Tartary-buckwheat-derived nanoparticles (TBDNs) were isolated and purified using a combination of differential centrifugation and PEG precipitation. A response surface test was employed to optimize the extraction process of TBDNs in terms of yield, total phenol and flavonoid content, as well as antioxidant activity. The results demonstrated that TBDNs exhibited the highest yield and activity at a 10% concentration of PEG, pH 5, and centrifugation temperature of 4 °C. Under these conditions, the measured yield of TBDNs was 1.7795 g/kg, with a total phenol content of 178.648 mg/100 g, total flavonoid content of 145.421 mg/100 g, and DPPH-radical-scavenging rate reaching 86.37%. Characterization through a transmission electron microscope and nanoparticle-size-tracking analyzer revealed that TBDNs possessed a teato-type vesicle structure with dispersed vesicle clusters present within them. Furthermore, the extracted TBDNs were found to have an average particle size of 182.8 nm with the main peak observed at 162.8 nm when tested for particle size distribution analysis. These findings provide a novel method for extracting TBDNs while laying the groundwork for future investigations into their activities.

Evaluation of the microstructural and physico-mechanical characteristics of cement-stabilized termite hill soil for construction application

This study investigates the potential of termite hill soil (TS) as an environmentally friendly alternative to cement. By reducing reliance on cement, this approach could decrease the environmental footprint of the construction industry. Portland cement was used to stabilize TS at contents of 5%, 10%, and 15% by weight (wt%). Key engineering properties of the stabilized and un-stabilized specimens were analyzed to assess the suitability of TS for construction applications. Physical properties were evaluated using particle size distribution analysis, dimensional stability testing, and density measurements. Microstructural analysis employed Scanning Electron Microscopy (SEM) coupled with Energy-Dispersive X-ray spectroscopy (EDX), Fourier Transform Infrared (FTIR) spectroscopy, and X-ray fluorescence (XRF) to investigate the effects of stabilization on the microstructure and its influence on bulk properties. Compressive and flexural strength tests were conducted to assess the mechanical properties of the specimens. Compressive strength results showed that the 10–15 wt% stabilization level achieved the highest values, reaching 3.81 MPa, 4.58 MPa, and 5.91 MPa at 7, 14, and 28 days, respectively. Flexural strength values for the same specimens at these curing times were 0.98 MPa, 1.72 MPa, and 1.94 MPa, respectively. The findings of this investigation can serve as a reference for treating other soils to achieve properties similar to TS, making them suitable for durable construction applications. Additionally, this study demonstrates the feasibility of developing and using TS as construction material for housing solutions in regions with abundant and currently undervalued termite hill resources.

Surface Modification of Calcined Kaolinite for Enhanced Solvent Dispersion and Mechanical Properties in Polybutylene Adipate/Terephthalate Composites.

In order to regulate the surface properties of calcined kaolinite for the purpose of achieving uniform distribution within various polar dispersion media, 3-aminopropyltriethoxysilane and phenyl glycidyl ether were employed to chemically modify calcined kaolinite. The grafting rate, surface properties, and dispersion properties of calcined kaolinite particles in different polar organic media were changed by varying the dosage of the modifiers. FT-IR analysis confirmed successful surface modification, while thermogravimetric analysis indicated a maximum graft coverage of 18.44 μmol/m2 for the modified particles. Contact angle measurements and particle size distribution analyses demonstrated the effective adjustment of surface characteristics by the modifiers. Specifically, at a mass ratio of 1.0 of modifier to kaolinite particles, the modified particles exhibited a contact angle of around 125°, achieving uniform dispersion in different polarity media. Particle size distribution ranged from 1600 nm to 2100 nm in cyclohexane and petroleum ether, and from 900 nm to 1200 nm in dioxane, ethyl acetate, and DMF, showcasing a significant improvement in dispersion performance compared to unmodified particles. Concurrently, to improve the mechanical properties of PBAT, modified particles were incorporated into the PBAT matrix, and the effect of modified particle addition on the tensile strength and fracture tensile rate of the composites was investigated. The optimal amount of modified particles is 6 wt.%~8 wt.%. This article aims at synthesizing modifier molecules containing different hydrophilic and hydrophobic groups to chemically graft onto the surface of calcined kaolinite. The hydrophilic and hydrophobic groups on the modified particles can adapt to dispersed systems of different polarities and achieve good distribution within them. The modified particles are added to PBAT to achieve good compatibility and enhance the mechanical properties of the composite material.

Unveiling the Hidden Networks: AFM Insights into Pre‐Vulcanized Hevea Latex and Its Profound Impact on Latex Film Mechanical Properties

AbstractNatural rubber (NR) films with different natural networks—concentrated NR (CNR), deproteinized NR (DPNR), and small rubber particles (SRP)—are investigated to explore the relationship between network structure and film properties using atomic force microscopy (AFM) in PeakForce Quantitative Nanomechanics (QNM) mode. Nitrogen content, gel content, and particle size distribution analyses reveal distinct network topologies in each latex type. Mechanical testing shows variations in tensile strength and crosslink density. AFM analysis provides insights into the crosslink network structures within the pre‐vulcanized latex film. It is found that DPNR and CNR films have a uniform distribution of crosslink networks, with DPNR exhibiting higher Young's modulus values. In contrast, SRP shows varying Young's modulus values, suggesting poor coalescence arising from a harder particle surface and a softer rubber core in an inhomogeneous network structure intrinsic to the non‐rubber components (NRCs) make‐up of SRP latex. This study highlights the pivotal role of natural network structures formed by NRCs in determining the ultimate properties of latex films, which has significant implications for the rubber industry, particularly in the production of latex‐dipped products, medical devices, and bioengineering applications.

Constructing soybean protein isolate /bacterial cellulose co-assemblies by pH shifting treatment: Molecular conformation and physicochemical properties

The study elucidates that the pH shifting treatment unfolds the conformation of soybean protein isolate (SPI), enabling it to intertwine with bacterial cellulose (BC) and form SPI/BC co-assemblies. Results from intrinsic fluorescence spectroscopy and surface hydrophobicity indicate that the SPI with pH shifting treatment shows a notable blue shift in maximum emission wavelength and increased surface hydrophobicity. It demonstrates that pH shifting treatment facilitates the unfolding of SPI's molecular conformation, promoting its entanglement with high aspect ratio BC. Particle size distribution and microstructural analysis further demonstrate that the pH shifting treatment facilitates the formation of SPI/BC co-assemblies. Evaluation of processing properties reveals that the SPI/BC co-assemblies exhibited exceptional gel and emulsification properties, with gel strength and emulsifying activity respectively six and two times higher than natural SPI. This enhancement is attributed to the thickening properties of BC with a high aspect ratio and the superior hydrophobicity of SPI in its molten globule state.

Investigation of the Aggregation of Aβ Peptide (1-40) in the Presence of κ-Carrageenan-Stabilised Liposomes Loaded with Homotaurine.

The kinetics of amyloid aggregation was studied indirectly by monitoring the changes in the polydispersity of mixed dispersion of amyloid β peptide (1-40) and composite liposomes. The liposomes were prepared from the 1,2-dioleoyl-sn-glicero-3-phoshocholine (DOPC) phospholipid and stabilised by the electrostatic adsorption of κ-carrageenan. The produced homotaurine-loaded and unloaded liposomes had a highly negative electrokinetic potential and remarkable stability in phosphate buffer (pH 4 and 7.4). For the first time, the appearance and evolution of the aggregation of Aβ were presented through the variation in the standard percentile readings (D10, D50, and D90) obtained from the particle size distribution analysis. The kinetic experiments indicated the appearance of the first aggregates almost 30 min after mixing the liposomes and peptide solution. It was observed that by adding unloaded liposomes, the size of 90% of the particles in the dispersion (D90) increased. In contrast, the addition of homotaurine-loaded liposomes had almost minimal impact on the size of the fractions of larger particles during the kinetic experiments. Despite the specific bioactivity of homotaurine in the presence of natural cell membranes, this study reported an additional inhibitory effect of the compound on the amyloid peptide aggregation due to the charge effects and 'molecular crowding'.

Synthesis of silver (Ag) nano/micro-particles via green process using Andrographis paniculata leaf extract as a bio-reducing agent

In this work silver nano/micro-particles have been synthesized using sambiloto (Andrographis paniculata) plant extract as a bio-reducing agent. The effects of different plant extract concentrations, AgNO3 precursor concentrations, and reaction time on the synthesized silver nano/micro-particles were investigated. The silver nano/micro-particles samples were then analyzed using UV-Vis spectrophotometer (UV-Vis), X-Ray Diffractometer (XRD), Field Emission Scanning Electron Microscopy (FESEM), Particle Size Analyzer (PSA), and Fourier Transform Infra-Red (FTIR) spectroscopy. The UV-Vis absorbance spectrum of the colloid silver nano/micro-particles exhibited that all samples had absorbance peaks at a wavelength around 450 nm, confirming the formation of silver nano/micro-particles. It was also found that the UV-Vis absorbance peak of the silver nano/micro-particles inversely increased with decreasing AgNO3 solution concentration. Whereas, the higher the sambiloto extract concentration the higher the UV-Vis absorbance peaks. The UV-Vis absorbance peak increased with increasing synthesis time, suggesting that silver nano/micro-particles became more prominent. The UV-Vis absorbance peaks of the silver nano/micro-particles were about 0.0462, 0.0637, 0.0729, and 0.0936 at reaction time of 5, 10, 20, and 40 min, respectively. The XRD analysis result confirmed that the synthesized silver nano/micro-particles were in the form of nanocrystals with a face-centered cubic centered without any impurities. Additionally, the FESEM images showed that the silver nano/micro-particles had the primary particle size of 150-300 nm. There was the formation of some secondary particles with the size of about 0.7-1.5?m due to the agglomeration of primary particles. The particle size distribution analysis further confirmed the presence of primary and secondary particles. Meanwhile, the FTIR analysis confirmed the presence of four main peaks, linked to functional groups in the sambiloto extract and involved in the creation of silver nano/micro-particles.

Automated screening of precipitation polymerizations and evaluation using image recognition for divinylbenzene and methacrylic acid

AbstractBy applying automated high‐throughput experimentation, 63 precipitation polymerizations of divinylbenzene and methacrylic acid were performed with a total of 1638 samples analyzed by gas chromatography (GC), nuclear magnetic resonance (NMR) spectroscopy, and scanning electron microscopy (SEM). The conversion of each reaction was investigated revealing the best substrate concentrations within the current setup. The GC evaluation was performed automatically via a new custom‐made Python script significantly reducing the time to evaluate the results. Furthermore, the particle growth was monitored by utilizing an innovative image recognition tool to identify particles and their respective sizes using SEM images. Furthermore, a statistical particle size distribution analysis was performed, which is hardly achievable in reasonable time by classical evaluation methods. Using this new procedure, the highest conversion (70%) as well as the largest particles (3700 nm) have been obtained utilizing a high initial monomer (5 vol%) and initiator (5 mol%) concentration. Accordingly, the smallest particles (245 nm) yielded from the lowest starting concentration (1 vol% monomer and 1 mol% initiator).

Innovative insights into the preparation of tamarind gum base film loaded with pomelo essential oil via a low-energy emulsion method combined with melatonin: Maximizing the dual functions of tamarind gum

Pomelo essential oil has good antioxidant and antimicrobial properties. The objective of this study was to modify the active packaging loaded with essential oil through low-energy emulsification, in order to achieve both film-forming and emulsifying properties of tamarind gum, and to investigate the surface activity of melatonin in the emulsion. When α:β mixing ratio of 60:40, the resulting film solution exhibited favorable apparent viscosity and reduced emulsion flocculation and precipitation phenomena. Particle size distribution analysis and optical microscopy results demonstrated that the obtained emulsion was uniformly dispersed at an α:β mixing ratio of 60:40, with droplet diameters mainly concentrated within the range of 1–100 μm. After undergoing film-forming treatment, E-3-F (α:β mixing ratio of 60:40) exhibited a smoother and more compact microstructure, leading to significant improvements in mechanical properties and barrier performance. Laser confocal microscopy imaging revealed that the addition of melatonin further reduced interfacial tension between oil and water, while simultaneously weakening hydrophobic interaction forces among oil droplets, thereby effectively inhibiting droplet aggregation behavior. Moreover, incorporation of melatonin also enhanced material compactness and imparted excellent antioxidant effects to the packaging material. Consequently, this study ultimately unveils potential for low-energy emulsification combined with melatonin application in bio-based packaging field while providing novel insights into developing multifunctional bio-based packaging.

Enhanced green hydrogen production via CdS/Cu-doped TiO2 nanotubes: Advancements in photoanode performance

Cadmium Sulfide (CdS) deposited Copper (Cu) doped TiO2 nanotube hybrid photoanode (CdS/Cu-TNT) is developed via electrochemical anodization and subsequent electrochemical deposition for efficient green hydrogen production. Cu-doping of TiO2 Nanotube (TNT) is achieved in one-step anodization, which is more energy efficient than conventional arc melting. Results indicate that CdS/Cu-TNT photoanodes increased carrier density by 9 times and achieved a low bandgap of 2.46 eV which enhancing their suitability as photoanodes. Particle size distribution analysis has shown that Cu doping causes thicker nanotube walls with decreased surface area. CdS is coated over the Cu-doped TNT to enhance the photoelectrochemical properties further. The photocurrent of CdS-deposited TNT is 7.8 times higher than bare TNTs. Raman Spectral Mapping indicates the uniformity of CdS deposition and Cu doping. Photostability experiments reveal excellent performance and switching characteristics for Cu-doped, CdS-deposited, and CdS/Cu-TNT hybrid samples. The hybrid electrode with larger diameter nanotubes shows a 52.39 % increase in the Fill Factor of photocurrent response for CdS/Cu-TNT. Moreover, hydrogen production is significantly enhanced, with CdS/TNT demonstrating a 3.8-fold increase and CdS/Cu-TNT demonstrating a 4.1-fold increase. This research highlights the potential of Cu doping in TiO2 nanotubes for hydrogen generation, offering improvements over the limitations of TiO2 as a photoanode.

Experimental study and prediction method of solid destabilization and production in deep carbonate reservoir during mining

Wellbore instability is one of the significant challenges in the drilling engineering and during the development of carbonate reservoirs, especially with open-hole completion. The problems of wellbore instability such as downhole collapse and silt deposit in the fractured carbonate reservoir of Tarim Basin (Ordovician) are severe. Solid destabilization and production (SDP) was proposed to describe this engineering problem of carbonate reservoirs. To clarify the mechanism and mitigate potential borehole instability problems, we conducted particle size distribution (PSD) analysis, X-ray diffraction (XRD) analysis, triaxial compression tests, and micro-scale sand production tests based on data analysis. We found that the rock fragments and silt in the wellbore came from two sources: one from the wellbore collapse in the upper unplugged layers and the other from the production of sand particles carried by the fluid in the productive layers. Based on the experimental study, a novel method combining a geomechanical model and microscopic sand production model was proposed to predict wellbore instability and analyze its influencing factors. The critical condition and failure zone predicted by the prediction model fit well with the field observations. According to the prediction results, the management and prevention measures of wellbore instability in carbonate reservoirs were proposed. It is suggested to optimize the well track in new drilling wells while upgrading the production system in old wells. This study is of great guiding significance for the optimization of carbonate solid control and it improves the understanding of the sand production problems in carbonate reservoirs.