Paper-based Analytical Devices Research Articles

MagnEtophoretic Slider Assay (MeSA): A simple platform for point-of-care diagnostics

Infectious diseases account for millions of deaths each year. To reduce the number of infectious disease related deaths, diagnostic testing needs to be more accessible to patients in low-income countries as well as developed countries. Current diagnostic methods involve centralized laboratories, trained personnel, and are time-intensive, limiting translation to the point-of-care (POC). Microfluidic devices are a popular alternative for diagnostics due to reduced assay times, reduced sample volume, and lower cost. Microfluidic devices are small (<10 cm) and can perform complex assays. Microfluidic paper-based analytical devices (µPADs) are a popular approach to help translate diagnostics to the POC but historically suffer from poor sensitivity when compared to established laboratory methods. Magnetically labeling analytes allows samples to be sorted resulting in improved sensitivity and specificity. Microfluidic magnetophoresis is the process of manipulating magnetic particles in a magnetic field and offers the ability to wash and concentrate a sample during flow. However, until recently, magnetophoresis has not been used in conjunction with µPADs because magnetophoresis requires complex and expensive instrumentation to control flow. Coupling magnetophoresis with µPADs enables pump-free flow control, simple operation, and low cost. Early magnetophoresis µPADs showed detection limits similar to traditional methods but higher than targets for clinical use. In this work, we demonstrate a novel, simple MagnEtophoretic Slider Assay (MeSA) that is free of any external instrumentation and offers a new platform for POC diagnostics. We demonstrate the assay’s capability through biotin competitive assays and a sandwich immunoassay for E. coli detection. The calculated limit of detection for E. coli was 1.62 × 103 Colony Forming Units per mL (CFU/ml). The work described is a novel and simple microfluidic platform that has potential for a wide range of future applications.

Evaluation of cellophane as platform for colorimetric assays on microfluidic analytical devices

Due to their low cost, simplicity, and pump-free liquid transport properties, colorimetric assays on paper spots and microfluidic paper-based analytical devices (µPADs) are regarded as useful tools for point-of-care testing (POCT). However, for certain types of colorimetric assays, the "non-transparent" and "white" characters of paper can be a disadvantage. In this work, the possibilities of using cellophane as an alternative platform for colorimetric assays have been investigated. Cellophane is a low cost and easy-to-handle transparent film made of regenerated cellulose. Owing to its hydrophilic character, cellophane-based microfluidic channels fabricated through a print-cut-laminate approach enabled pump-free liquid transport into multiple detection areas, similar to µPADs. In addition, the water absorption characteristics of cellophane allowed the stable immobilization of water-soluble colorimetric indicators without any surface modification or additional reagents. The transparency of cellophane provides possibilities for simple background coloring of the substrates, increasing the dynamic signal range for hue-based colorimetric assays, as demonstrated for two model assays targeting H2O2 (46-fold increase) and creatinine (3.6-fold increase). Finally, a turbidity detection-based protein assay was realized on black background cellophane spots. The lowest limits of detection achieved with the cellophane-based devices were calculated as 7µM for H2O2, 2.7mgdL-1 for creatinine, and 3.5mgdL-1 for protein (human serum albumin).

Engineered detection zone to enhance color uniformity on paper microfluidics fabricated via Parafilm®-heating-laser-cutting

In this article, we first report a simple fabrication technique to create Parafilm®-laminated microfluidic paper-based analytical devices (µPADs) with a high resolution and then introduce novel engineered detection zones (D-zones) to enhance color uniformity without any chemical modifications. The Parafilm®-heating-laser cutting fabrication method comprises of three steps: 1) flattening a Parafilm® layer on paper, 2) heating in an oven at 90 °C for 30 min, and 3) CO2 laser ablation of the patterns. This method enabled laminated µPADs with a minimum barrier width of 172 ± 15 µm, with resistance to various organic solvents and surfactant solutions. Using this technique, µPADs with two types of engineered D-zones were fabricated. The multi-inlet D-zone had four micro-inlets (<500 µm width), enabling sample entrance into the D-zone from four directions simultaneously towards the center. The segmented D-zone had four segments each with its own micro-inlet allowing for separate reactions to occur in miniaturized segments simultaneously. Using an enzymatic glucose assay for the colorimetric reaction, the multi-inlet and segmented D-zones significantly decreased color gradient from 28.77 ± 1.49 to 12.35 ± 1.18 and 8.95 ± 0.98 %, respectively, compared to the conventional devices. We further used the µPADs with segmented D-zones for the detection of glucose in artificial urine in the clinically relevant range of 2–50 mM, where R2 > 0.99 of the fitted curve showed an excellent correlation between the generated signals and the glucose concentrations. Also, compared to the conventional devices, the engineered D-zones showed improved precision and reproducibility and a better linear range. Finally, spiked real human urine samples were tested, demonstrating the applicability of the engineered devices for real-world applications. Overall, with a simple fabrication method and a novel design for color uniformity, this paper contributes to the advancement of µPADs and paves the way towards commercialization.

Microfluidic paper-based fluorescence sensor for L-homocysteine using a molecularly imprinted polymer and in situ-formed fluorescent quantum dots

Microfluidic paper-based analytical devices modified with molecularly imprinted polymers (μPADs@MIPs) were developed for fluorescent detection of targeted thiols via in situ UV-induced formation of quantum dots (μPADs@MIPs@QDs). The selectivity enhancement by the MIP layer formed on the filter paper surface was demonstrated for the isolation of L-homocysteine from wine. Followed by the addition of metal precursors solution (Zn/Cd/Cu) and UV irradiation, fluorescent quantum dots were formed thus enabling quantitative detection of the thiol (serving as a QD capping agent). The effect of different semiconductors was investigated to achieve a lower band gap and higher fluorescence intensity. Increasing fluorescence intensity in the presence of thiol groups was obtained for the following precursors mixture composition: ZnCdCu/S > ZnCd/S > ZnCu/S > ZnS. The proposed method has a good relationship between the fluorescence intensity of ZnCdCu/S QDs and L-homocysteine in a linear range from 0.74 to 7.40 μM with a limit of detection (LOD) and quantification (LOQ) of 0.51 and 1.71 μM respectively. This method was applied for the determination of L-homocysteine in white wine with RSD under 6.37%.

Withdrawal: Application of microfluidic paper-based analytical devices (μPADs) for food microbial detection, Spyridon Andreas Papatheodorou, Theofania Tsironi, Maria Giannakourou, Panagiotis Halvatsiotis, Dimitra Houhoula.

Application of microfluidic paper-based analytical devices (μPADs) for food microbial detection, published in Journal of the Science of Food and Agriculture, https://doi.org/10.1002/jsfa.11822. The above article, published online on 18 February 2022 in Wiley Online Library (wileyonlinelibrary.com), has been withdrawn by agreement between the journal Editor in Chief, Andrew Waterhouse, and John Wiley & Sons, Ltd. The withdrawal has been agreed following no response from the author to requests to sign the Journal's publishing license. © 2022 Society of Chemical Industry.

Paper-based analytical device for fast colorimetric detection of total hemoglobin and free hemoglobin from human blood sample

Total hemoglobin (THb) and free hemoglobin (FHb) are biomarkers of anemia and hemolysis, playing a critical role in human health status. This study reports a paper-based device by field amplified sample stacking (FASS) using colorimetric method to quantify both THb and FHb. The detection of THb was based on the color intensity of the Hb stacking band, a limit of detection (LOD) of 11 g∙L−1 and a linear working range of 16 ∼ 140 g∙L−1 were achieved. With selective chromatic reaction of the stacking band with o-tolidine, the sensitivity of Hb detection was further enhanced by 2000 times, a LOD of 25.8 mg∙L−1 and a linear range of 30 ∼ 1000 mg∙L−1 was obtained for FHb. This paper-based device was successfully used for detection of high concentration THb and low concentration FHb from the same blood sample, and both meeting the requirements of clinical diagnosis. In addition, the feasibility of on-site plasma preparation and online integration with the device was also preliminarily investigated with a blood separation membrane. This paper-based device could be used as a new platform for developing fast and low-cost Hb point-of-care testing devices.

Controllable Preparation of 2D V2 O5 Peroxidase-Mimetic Nanozyme to Develop Portable Paper-Based Analytical Device for Intelligent Pesticide Assay.

Given severe harmfulness of pesticides, unique characteristics of peroxidase-mimetic nanozymes, and favorable prospects of paper-based analytical devices (PADs), it is highly desirable to construct a nanozyme-based PAD for intelligent analysis of pesticide without enzyme/aptamer/antibody and interference of O2 . Herein, 2D nanosheet-like V2 O5 (2D-VONz) with exclusive peroxidase-mimetic activity is controllably prepared under the optimal reactants concentration and reaction temperature. Experimental characterizations demonstrate that 2D-VONz exhibits high affinity and catalytic rate, and catalytic oxidation is dependent on •OH yielded from the decomposition of H2 O2 catalyzed by 2D-VONz, and the catalytic performance is relevant to π-π stacking force-controlled surface zeta potential of 2D-VONz changed by substrates, giving a comprehensive understand of the inherent mechanism. Interestingly, 2D-VONz activity is inhibited by pesticide glyphosate (Gly), and then is exploited to develop a PAD, on which, Gly declines 2D-VONz activity to prevent it from catalyzing the oxidation of 3,3',5,5'-tetramethylbenzidine, contributing to rapid, naked-eye, and portable analysis of pesticide using a smartphone. The current strategy on preparing exclusive peroxidase-mimetic 2D nanozyme, investigating catalytic mechanism, developing nanozyme-based PAD, and achieving direct pesticide sensing will set up new avenues to improve the analytical performance, strengthen the practicability, and broaden the application scope of nanozymes.

Fabrication of paper-based analytical devices by a laminating method with thermal ink ribbons, sticky notes, and office appliances.

A stencil printing method utilizing sticky notes, a thermal transfer ink ribbon, and office appliances for paper-based analytical device (PAD) fabrication was proposed. A sticky note was attached to a filter paper, and a mask pattern was cut using a cutting machine. A commercially available thermal ink ribbon was then placed over the mask and laminated. We have characterized the fabricated devices. This approach could be used for the fast and mass prototyping of PADs using simple office appliances with no need for a wax printer.

A bacterial cellulose-based LiSrVO4:Eu3+ nanosensor platform for smartphone sensing of levodopa and dopamine: point-of-care diagnosis of Parkinson's disease.

Among the catecholamines, dopamine (DA) is essential in regulating multiple aspects of the central nervous system. The level of dopamine in the brain correlates with neurological diseases such as Parkinson's disease (PD). However, dopamine is unable to cross the blood-brain barrier (BBB). Therefore, levodopa (LD) is used to restore normal dopamine levels in the brain by crossing the BBB. Thus, the control of LD and DA levels is critical for PD diagnosis. For this purpose, LiSr0.0985VO4:0.015Eu3+ (LSV:0.015Eu3+) nanoplates were synthesized by the microwave-assisted co-precipitation method, and have been employed as an optical sensor for the sensitive and selective detection of catecholamines. The synthesized LSV:0.015Eu3+ nanoplates emitted red fluorescence with a high quantum yield (QY) of 48%. By increasing the LD and DA concentrations, the fluorescence intensity of LSV:0.015Eu3+ nanoplates gradually decreased. Under optimal conditions, the linear dynamic ranges were 1-40 μM (R2 = 0.9972) and 2-50 μM (R2 = 0.9976), and the detection limits (LOD) were 279 nM, and 390 nM for LD and DA, respectively. Herein, an instrument-free, rapid quantification visual assay was developed using a paper-based analytical device (PAD) with LSV:0.015Eu3+ fixed on the bacterial cellulose nanopaper (LEBN) to determine LD and DA concentrations with ease of operation and low cost. A smartphone was coupled with the PAD device to quantitatively analyze the fluorescence intensity changes of LSV:0.015Eu3+ using the color recognizer application (APP). In addition, the LSV:0.015Eu3+ nanosensor showed acceptable repeatability and was used to analyze real human urine, blood serum, and tap water samples with a recovery of 96-107%.

Semiquantitative and visual detection of ferric ions in real samples using a fluorescent paper-based analytical device constructed with green emitting carbon dots.

A simple and portable paper-based analytical device was developed for visual and semiquantitative detection of ferric ion in real samples using green emitting carbon dots (CDs), which were prepared via microwave method using sodium citrate, urea and sodium hydroxide as raw materials and then loaded on the surface of paper substrate. When Fe3+ exists, the green fluorescence of CDs was quenched and significant color change from green to dark blue were observed, resulting the visual detection of Fe3+ with a minimum distinguishable concentration of 100 μM. By analyzing the intensity changes of green channels of test paper with the help of smartphone, the semiquantitative detection was realized within the range of 100 μM to 1200 μM. The proposed paper-based analytical devices have great application prospects in on site detection of Fe3+ in real samples.

Accuracy improvement via novel ratiometry design in distance-based microfluidic paper based analytical device: instrument-free point of care testing.

Developing accurate, precise, instrument-free, and point-of-need microfluidic paper-based devices is highly significant in clinical diagnosis and biomedical analysis. In the present work, a ratiometric distance-based microfluidic paper-based analytical device (R-DB-μPAD), along with a three-dimensional (3D) multifunctional connector (spacer), was designed to improve the accuracy and detection resolution analyses. Specifically, the novel R-DB-μPAD was used for the accurate and precise detection of ascorbic acid (AA) as a model analyte. In this design, two channels were fabricated as detection zones, with a 3D spacer located between the sampling and detection zones to improve the detection resolution by preventing the reagents mixing from overspreading between these zones. Two probes for AA were used: Fe3+ and 1,10-phenanthroline were deposited in the first channel, and oxidized 3,3',5,5'-tetramethylbenzidine (oxTMB) was added to the second channel. Accuracy improvement of this ratiometry-based design was achieved by enhancing the linearity range and reducing the volume dependency of the output signal. Moreover, the 3D connector improved the detection resolution by eliminating the systematic errors. Under the optimal conditions, the ratio of the distances of the color bands in the two channels was used to construct an analytical calibration curve in the range from 0.05 to 1.2 mM, with a limit of detection of 16 μM. The proposed R-DB-μPAD combined with the connector was successfully used for the detection of AA in orange juice and vitamin C tablets with satisfactory accuracy and precision. This work opens the door for multiplex analysis of various analytes in different matrices.

Fabrication of a paper-based facile and low-cost microfluidic device and digital imaging technique for point-of-need monitoring of hypochlorite.

Lab-on-a-paper-based devices are promising alternatives to the existing arduous techniques for point-of-need monitoring. The present work reports an instant and facile method to produce a microfluidic paper-based analytical device (μPAD). The fabricated μPAD has been used to detect hypochlorite (OCl-) by incorporating newly synthesized chromo-fluorogenic ratiometric probes 1 and 2 into the sample reception zone. The probes showed high selectivity and fast response (<10 s) toward OCl- with an excellent linear relationship in the concentration range of 0-100 μM. The concentration-dependent fluorometric change driven by the reaction of 1@μPAD with OCl- has been monitored using gel-doc imaging systems, which is unprecedented. Digitizing the intensity of the colour solution with different mathematical models of colour has developed a straightforward method for monitoring OCl- without any interference from its competitors. 1@μPAD can detect OCl- at ∼10 times lower than the WHO recommended limit. The detection limit of 1@μPAD via a digital camera-based fluorescence technique was found to be better over digital camera-based cuvette assays. Therefore, 1@μPAD has been successfully utilized to monitor OCl- in actual environmental water samples with portability, ease of use, and sensitivity. The analytical RSD was found to be ≤3% based on fluorimetric detection using 1@μPAD. The chemodosimetric reaction between OCl- and the probe was evidenced by UV-vis and fluorescence spectroscopy, 1H NMR, and ESI-MS. The rapid response time, biocompatibility, low cytotoxicity, 100% aqueous solubility, ratiometric feature, and exclusive OCl- selectivity over other competitive ROS/RNS successfully lead to the application of the probes for bioimaging of exogenous as well as endogenous OCl- in normal cells (HEK293) and cancerous cells (HeLa).

Point-of-care paper-based analytical device for potentiometric detection of myoglobin as a cardiovascular disease biomarker.

One of the cardiac biomarkers, myoglobin (Mb), is important in the rapid identification of cardio-vascular disorders. Therefore, point-of-care monitoring is essential. Pursuing this goal, a robust, reliable, and affordable paper-based analytical apparatus for potentiometric sensing has been developed and characterized. The molecular imprint technique was used to create a customized biomimetic antibody for myoglobin (Mb) on the surface of carboxylated multiwalled carbon nanotubes (MWCNT-COOH). This was accomplished by attaching Mb to carboxylated MWCNTs' surfaces and then filling the empty spaces through the mild polymerization of acrylamide in N,N-methylenebisacrylamide and ammonium persulphate. The modification of the MWCNTs' surface was verified by SEM and FTIR analysis. A hydrophobic paper substrate coated with fluorinated alkyl silane (CF3(CF2)7CH2CH2SiCl3, CF10) has been coupled with a printed all-solid-state Ag/AgCl reference electrode. The presented sensors showed a linear range of 5.0 × 10-8 to 1.0 × 10-4 M with a potentiometric slope of -57.1 ± 0.3 mV decade-1 (R2 = 0.9998) and a detection limit of 28 nM at pH 4. Compared to creatinine, sucrose, fructose, galactose, sodium glutamate, thiamine, alanine, ammonium, uric acid, albumin, glutamine, guanine, troponine T, and glucose, the sensor showed good selectivity for Mb. It demonstrated a good recovery for the detection of Mb in several fake serum samples (93.0-103.3%), with an average relative standard deviation of 4.5%. The current approach might be viewed as a potentially fruitful analytical tool for obtaining disposable, cost-effective paper-based potentiometric sensing devices. These types of analytical devices can be potentially manufacturable at large scales in clinical analysis.

Generating signals at converging liquid fronts to create line-format readouts of soluble assay products in three-dimensional paper-based devices.

The correct interpretation of the result from a point-of-care device is crucial for an accurate and rapid diagnosis to guide subsequent treatment. Lateral flow tests (LFTs) use a well-established format that was designed to simplify the user experience. However, the LFT device architecture is inherently limited to detecting analytes that can be captured by molecular recognition. Microfluidic paper-based analytical devices (μPADs), like LFTs, have the potential to be used in diagnostic applications at the point of care. However, μPADs have not gained significant traction outside of academic laboratories, in part, because they have often demonstrated a lack of homogeneous shape or color in signal outputs, which consequently can lead to inaccurate interpretation of results by users. Here, we demonstrate a new class of μPADs that form colorimetric signals at the interfaces of converging liquid fronts (i.e., lines) to control where colorimetric signals are formed without relying on capture techniques. We demonstrate our approach by developing assays for three classes of analytes-an ion, an enzyme, and a small molecule-to measure using iron(III), acetylcholinesterase, and lactate, respectively. Additionally, we show these devices have the potential to support multiplexed assays by generating multiple lines in a common readout zone. These results highlight the ability of this new paper-based device architecture to aid the interpretation of assays that create soluble products by using flow to constrain those colorimetric products in a familiar, line-format output.

A paper-based chemical tongue based on the charge transfer complex of ninhydrin with an array of metal-doped carbon dots discriminates natural amino acids and several of their enantiomers.

Simultaneous detection of multiple amino acids (AAs) instead of individual AAs is inherently worthwhile for improving diagnostic accuracy in clinical applications. Here, a facile and reliable colorimetric microfluidic paper-based analytical device (μPAD) using carbon dots doped with transition metals (Cr3+, Mn2+, Fe3+, Co2+, Ni2+, Cu2+, and Zn2+) has been provided to detect and discriminate 20 natural amino acids. To make the colourless metal-doped carbon dots suitable for colorimetric assays, they were mixed with ninhydrin to form a charge transfer complex. This optical tongue system, which was constructed by dropping mixtures of ninhydrin with a series of metal-doped carbon dots on a paper substrate in an array format, represented obvious but different colorimetric signatures for every examined amino acid. Since bovine serum albumin was used as a chiral selector reagent for synthesizing the CDs, the sensor device represented excellent selectivity to identify enantiomeric species of AAs. This is the first optical array device that can simultaneously discriminate AAs and several of their enantiomers. We employed various statistical and chemometric methods to analyze the digital data library collected by Image J software, including principal component analysis (PCA), linear discriminant analysis (LDA), and hierarchical cluster analysis (HCA). Twenty AAs could be well distinguished at various concentrations (10.00, 5.00, 2.50, and 1.25 mM). The colorimetric patterns were highly repeatable and were characteristic of individual AAs. Besides qualitative analysis, the designed μPAD-based optical tongue represented quantitative analysis ability, e.g., for lysine in the concentration ranges of 0.005-20.0 mM with a detection limit of 1.0 × 10-6 M and for arginine in the concentration range of 0.12-20.00 mM with a detection limit of 80.0 × 10-6 M. In addition, the binary, ternary, and quaternary mixtures of AAs could also be well recognized with this sensor.

Simultaneous colorimetric detection of nephrolithiasis biomarkers using a microfluidic paper-based analytical device.

A microfluidic paper-based analytical device (μPAD) coupled with colorimetric detection was developed for simultaneous determination of urinary oxalate, citrate and uric acid (UA) which are important biomarkers of nephrolithiasis or kidney stones. The colorimetric detections were based on enzymatic reactions using oxalate oxidase and uricase for oxalate and UA, respectively, while an indicator displacement assay (IDA) using a copper murexide complex was applied for citrate detection. The developed μPAD was successfully applied for simultaneous determination of the three biomarkers in urine within 25 min, with linear ranges of 2-40, 5-150, and 5-45 mg L-1 and detection limits of 0.6, 2.9 and 3.1 mg L-1 for oxalate, UA, and citrate, respectively. The values of the percent relative standard deviation (% RSD) were lower than 6.4% for inter-day and intraday measurements of oxalate, citrate and UA standards spiked in urine samples with recovery percentages in the range of 81.0-109.8%, indicating acceptable accuracy and precision of the developed method for determination of the three biomarkers in urine samples. Accordingly, the developed μPAD holds great promise to be a simple, fast, inexpensive, low-sample and reagent volume, reliable and portable tool for simultaneous determination of oxalate, citrate and UA in urine, especially for on-site analysis.

A visualized sensor based on layered double hydroxides with peroxidase-like activity for sensitive acetylcholinesterase assay.

Acetylcholinesterase (AChE) plays a crucial role in biological neurotransmission. The aberrant expression of AChE is associated with various neurodegenerative diseases. Therefore, it is of great significance to develop a simple and highly sensitive AChE analysis platform. Herein, a simple colorimetric sensor was constructed for sensitive detection of AChE based on the peroxidase-like catalytic activity of Ni/Co layered double hydroxides (Ni/Co LDHs). In this sensor, the fabricated Ni/Co LDHs possess high peroxidase-like activity, enabling rapid catalysis of o-phenylenediamine (OPD) to produce yellow oxOPD in the presence of H2O2. This peroxidase-like activity of Ni/Co LDHs was found to be effectively inhibited by the presence of AChE. It is speculated that the combination of AChE on the outer surface of Ni/Co LDHs through non-covalent interaction may cover the active sites and hinder their adsorption to the substrates, leading to the failure of OPD oxidation. As a result, the yellow color from oxOPD is related to the AChE concentration, enabling the direct AChE assay in an equipment-free manner. In addition, the fabricated Ni/Co LDHs could be modified on a paper surface to obtain a paper-based analytical device for visualized colorimetric detection of AChE. The as-proposed sensor shows high sensitivity to AChE with a detection limit down to 6.6 μU mL-1. Therefore, this naked-eye paper-based sensor is capable of on-site and real-time detection of AChE, and has outstanding application prospects in clinical diagnosis and biomedical fields.

Multivariate Optimization of Operational Parameters in Microfluidic Paper-Based Analytical Devices for the Determination of Organophosphate and Carbamate Pesticides

Multivariate Optimization of Operational Parameters in Microfluidic Paper-Based Analytical Devices for the Determination of Organophosphate and Carbamate Pesticides

Trace nickel analysis in water samples via paper-based devices coupled with co-precipitation

A simple, fast, low-cost and sensitive microfluidic paper-based analytical device (u-PADs) integrated with the co-precipitation enrichment procedure was developed to analyse Ni(II) in tap and mineral water samples. The impacting factors, including pH, centrifugation (5 min at 4000 rpm), and amounts of reagents were optimized. The limit of detection of 0.009 mg L-1 and linear range of 0.03-2.00 mg L-1 were achieved with good intra- and inter-day precision (4.7 and 5.6% RSD, respectively). The recovery tests were conducted by spiking tap and mineral water samples and analyzed using the u-PADs after co-precipitation enrichment. The results obtained by the proposed method were validated by inductively coupled plasma-optical emission spectrometry (ICP-OES). The recoveries of the present method and ICP-OES were ranged from 92.4-106.8% and 92.9-97.2%, respectively. The two sets of (u-PADs and ICP-OES) results were in good agreement, as a paired t-test indicated no significant differences. The proposed method could be utilized for analyzing trace levels of Ni(II) in water samples in developing countries where the availability of conventional analytical instruments are significant problems.

Capacitive platform for real-time wireless monitoring of liquid wicking in a paper strip.

Understanding the phenomenon of liquid wicking in porous media is crucial for various applications, including the transportation of fluids in soils, the absorption of liquids in textiles and paper, and the development of new and efficient microfluidic paper-based analytical devices (μPADs). Hence, accurate and real-time monitoring of the liquid wicking process is essential to enable precise flow transport and control in microfluidic devices, thus enhancing their performance and usefulness. However, most existing flow monitoring strategies require external instrumentation, are generally bulky and unsuitable for portable systems. In this work, we present a portable, compact, and cost-effective electronic platform for real-time and wireless flow monitoring of liquid wicking in paper strips. The developed microcontroller-based system enables flow and flow rate monitoring based on the capacitance measurement of a pair of electrodes patterned beneath the paper strip along the liquid path, with an accuracy of 4 fF and a full-scale range of 8 pF. Additionally to the wired transmission of the monitored data to a computer via USB, the liquid wicking process can be followed in real-time via Bluetooth using a custom-developed smartphone application. The performance of the capacitive monitoring platform was evaluated for different aqueous solutions (purified water and 1 M NaCl solution), various paper strip geometries, and several custom-made chemical valves for flow retention (chitosan-, wax-, and sucrose-based barriers). The experimental validation delivered a full-scale relative error of 0.25%, resulting in an absolute capacitance error of ±10 fF. In terms of reproducibility, the maximum uncertainty was below 10 nl s-1 for flow rate determination in this study. Furthermore, the experimental data was compared and validated with numerical analysis through electrical and flow dynamics simulations in porous media, providing crucial information on the wicking process, its physical parameters, and liquid flow dynamics.