Palmar Tilt Research Articles

The dorsal tangent line – A new approach in the radiological analysis of metacarpal fractures

Traditionally, the angle between the intersecting central axes (lateral projection intersecting central axes - LCA) of the proximal and distal fragments of metacarpal fractures is measured on radiographs. We recommend using the angle between the intersecting dorsal tangent lines instead (lateral projection intersecting dorsal tangent lines - LDT). We analyzed radiographs of 25 fractures of the fifth metacarpal bone shaft in three planes. Intraclass correlation coefficients (ICC) were used to estimate inter-rater and intra-rater reliability. Mean palmar tilt was 35.6° ± 12.5° according to LCA and 27.6° ± 12.0° according to LDT. There were no differences during repeated measurements. Intra-rater reliability was high: ICC (95% CI) for LDT was 0.82 (0.74–0.88) and for LCA it was 0.71 (0.51–0.83). Mean values of palmar tilt using LCA exceeded those using LDT by 8.0° ± 7.7° (p < 0.001). Only LDT measurements provided comparable results between all raters. In conclusion, we demonstrated the feasibility and reliability of intersecting dorsal tangent lines for measuring palmar tilt in fifth metacarpal fractures as an alternative to the commonly used angle between the intersecting central axes.

Manual reduction with traditional small splints for distal radius fracture in older patients

Objective: To investigate the effect of manual reduction with traditional small splints fixation for distal radius fractures in older patients in the emergency department. Methods: Older patients (aged at least 60 years) with distal radius fractures were enrolled in this study. The patients were randomly divided into the treatment group and the control group. The treatment group was treated with manual reduction and small splints fixation. The control group was treated with manual reduction and resin plaster fixation. Before treatment, after reduction, and 3 months after treatment, the palmar tilt angle, ulnar deviation angle, and radial length were recorded. Before treatment and 3 months after treatment, the Cooney wrist joint scores were recorded. The time of fracture healing and related adverse events during the treatment were recorded. Results: Before treatment and after reduction, there were no statistically significant differences between the two groups in palmar tilt angle, ulnar deviation angle, or radial length (P&gt;0.05). Three months after treatment, the palmar tilt angle, ulnar deviation angle, and radial length of the treatment group were better than those of the control group (P&lt;0.05). The Cooney wrist scores of the treatment group was significantly higher than that of the control group three months after the treatment (P&lt;0.05). The time of fracture healing of the treatment group was shorter than that of the control group, but the difference was no statistically significant (P&gt;0.05). Conclusions: Compared with resin plaster fixation, traditional small splints fixation for distal radius fractures in older patients have the advantages of less loss of fracture reduction and faster functional recovery. Besides, the method is simple and low cost thus, it needs to be promoted.

Morphometric Study of Distal End of Human Dry Radii

Introduction: Radius is the lateral bone of forearm. Important parameters of its distal end include angle of radial inclination, palmar tilt, and length of radial styloid process. Morphometry of the distal end of radius is important in various clinical orthopaedic procedures such as reduction of distal radius fractures, design of distal radius prosthesis, and kinematics of the wrist joint. The aim of this study is to determine the angle of radial inclination, palmar tilt, length of styloid process, oblique width, transverse and anteroposterior diameter of distal end of human dry radii in Nepalese population.&#x0D; Methods: This is a descriptive cross-sectional study conducted in the dissection hall of Department of Human Anatomy, Nepalese Army Institute of Health Sciences, Sanobhyrang, Kathmandu, Nepal from October 2019 to November 2019 after obtaining ethical approval. Total 76 human dry radii were included in the study by convenience sampling method. Angle of radial inclination, palmar tilt, length of styloid process, oblique width, transverse and anteroposterior diameter of distal end of human dry radii were studied. Data was collected and analysed by SPSS version 24.&#x0D; Results: Mean length of styloid process was 1.09 cm. Mean anteroposterior and transverse diameter of distal end of radius was 1.88 cm and 2.85 cm respectively. Mean oblique width of distal radius was 2.82 cm. The mean palmar tilt and angle of inclination of radius were 9.72 and 23.62 degree respectively. &#x0D; Conclusions: This study provides the reference data for the anatomical alignment while treating the injuries of the distal end of radius in Nepalese population.

Volar-locking plate versus external fixator in the management of distal radius fractures: An isokinetic study.

The aim of this study was to compare the clinical and isokinetic evaluation of distal radius fractures treated by volar locking plate (VLP) and external fixator. The study included fifty patients with distal radius fracture type C1/C2/C3. Twenty-seven patients (12 men, 15 women; mean age 49.5±4.42) underwent open reduction and VLP fixation, and 23 patients (10 men, 13 women; 52.1±4.6) underwent closed reduction and external fixation. The follow-up period was at least 12 months and the mean following time was 13.5±1.02 (12-15) months. The functional parameters measured were range of motion (ROM) and grip strength. Radiographic parameters (radial incli-nation, palmar tilt, and radial height) and isokinetic evaluation were measured at the 6 months and at the final follow-up after surgery. The isokinetic test was done at the speed of 60º/s. The non-fractured arm was tested first and all results were also expressed as a percentage of that on the normal side. Wrist scores according to the disability of the arm, shoulder, and hand (DASH) questionnaire were used. The DASH scores, grip strength, and palmar flexion were better in VLP group at the 6 months (p<0.05). However, there were no differences between two groups at the one year (p=0.79). Isokinetic evaluation of the VLP showed that peak pronation torque and total pronation work were better than external fixation at the 6 month (p<0.05). At the final of follow-up was seen no significant differences between two groups (p=0.11). We looked at external fixation and locked volar plates in a prospective study and we found an improved range of movement and isokinetic evaluation outcome at 6 months after locked plating, but there were no differences between two groups at the final of follow-up. Our study showed no evidence for the superiority of one treatment over the other at the final follow-up.

Volar Locking Plate Fixation Versus Closed Reduction for Distal Radial Fractures in Adults: A Systematic Review and Meta-Analysis.

Distal radial fractures in adults are common, representing a substantial burden to patients and health systems. The 2 main treatments are closed reduction and cast immobilization (CR) and volar locking plate (VLP) fixation. Our primary aim was to determine if VLP fixation leads to better patient-reported pain and function at 12 months compared with CR. We searched systematically for randomized controlled trials (RCTs) comparing outcomes of VLP fixation with CR for the treatment of distal radial fractures in adults. The Cochrane Collaboration risk-of-bias tool was used to assess the methodological quality of each study. Meta-analyses of patient-reported outcomes, clinical outcomes, and complications were performed. Key findings were assessed using the Grading of Recommendations, Assessment, Development and Evaluation (GRADE) approach. A total of 8 RCTs (810 participants) were eligible for inclusion. Based on moderate-certainty evidence, no clinically important differences in patient-reported pain and function were found: although the mean difference (MD) in the Disabilities of the Arm, Shoulder and Hand (DASH) score at 12 months was 4.1 points (95% confidence interval [CI], 1.2 to 7.0 points) in favor of VLP fixation, this was well below the minimum clinically important difference of 10 points. There was low-certainty evidence that VLP fixation led to better Patient-Rated Wrist Evaluation (PRWE) scores at 12 months (MD, 6.9 points; 95% CI, -0.6 to 14.3 points) and better DASH scores at 24 months (MD, 8.9 points; 95% CI, 5.8 to 12.1 points) but again, these differences were not clinically important. There was very low or low-certainty evidence that VLP fixation provided better long-term radiographic outcomes, including palmar tilt (MD, 6.5°; 95% CI, 2.8° to 10.1°), radial inclination (MD, 3.4°; 95% CI, 2.5° to 4.3°), and ulnar variance (MD, 0.7 mm; 95% CI, -0.8 to 2.1 mm). There were no clinically important differences between treatments with respect to patient-reported pain and function at 12 months post-treatment, even though VLP fixation resulted in better fracture alignment than CR. Therapeutic Level II. See Instructions for Authors for a complete description of levels of evidence.

Surgical treatment of distal end of radius fracture with volar locking plate: Clinicoradiological outcome of 25 cases

Introduction: Distal radius reconstruction every time needs aggressive operative intervention is still a debate among researchers and upper extremity surgeons. There is a role of nonoperative treatment in geriatric population and unfit patients. Novel techniques and revolution of implants advocated the best clinical outcome. Materials and Methods: We conducted a prospective study of 25 patients having AO OTA type A, B & C distal radius fractures treated with volar locking plate at our institute between 2015 to 2017. We include all close injuries in skeletally mature patients between ages 20-60 years. Outcome of the study was evaluated by using the Gartland and Werley score modified by Sarmiento & Patient Rated Wrist Evaluation (PRWE) score. Results: 6 patients had AO OTA type A, 11 patients had type B and 8 patients had type C fractures. Mean palmar flexion was 77 degrees. Dorsi flexion was 82 degrees observed. Average supination and pronation were 85 & 80 degrees respectively. Radial & ulnar deviations average 11 and 25 degrees were observed. 80% of the patients had loss of radial inclination less than 9 degrees. All the patients had less than 6 mm radial shortening. Loss of palmar tilt less than 6 degrees was observed. More than 90% of the patients had excellent to good outcome based on Gartland and Werley score. Conclusions: Volar plating is a proven method of choice in majority of distal end radius fractures regardless of comminution and fragments separation. Keywords: Distal radius fractures, Internal fixation, Volar plate, AO OTA fractures.

Comparing Outcomes between Arthroscopic-Assisted Reduction and Fluoroscopic Reduction in AO Type C Distal Radius Fracture Treatment.

Background Distal radius fracture is one of the most common injuries. Poor functional result with restricted wrist motion can be developed when there is intra-articular fibrous tissue development arising from articular step-off and gapping. Objectives The aim of this study is to compare the functional and radiological outcome between arthroscopic-assisted reduction and fluoroscopic reduction in treating unstable intra-articular distal radius fracture. Methods We retrospectively analyzed 12 patients with intraarticular AO type C distal radius fracture treated with arthroscopic-assisted fracture reduction and internal fixation and compared them with another group of 12 patients in which fracture reduction is assessed by fluoroscopy alone (15 males and 9 females, mean age 57.3, range 27-73). The two cohorts were analyzed for differences in radiological parameters including articular stepping and gapping, palmar tilt, radial inclination, ulnar variance as well as functional outcome in range of motion, grip strength, modified mayo wrist score, and Quick Disabilities of the Arm, Shoulder, and Hand (DASH) score at an average of 12.5 months (range 5-26) after surgery. Results Arthroscopic-assisted fracture reduction group has statistically better restoration of articular stepping and gapping, volar tilt and ulnar variance. Range of motion, grip strength, modified mayo wrist score and Quick DASH score also had statistically significant improvement in arthroscopic group. Conclusion Our study showed arthroscopic-assisted technique can precisely restore radiological parameters in highly comminuted distal radius fracture with good functional outcome. Also, associated intra-articular soft tissue injury can be detected and treated simultaneously. Level of Evidence This is a level III, retrospective cohort study.

A comparison of sugar-tong and volar-dorsal splints for provisional immobilization of distal radius fractures in the adult population.

Distal radius fractures are extremely common injuries affecting a wide range of patient demographics. The purpose of this study was to evaluate the outcomes of distal radius fractures managed initially with closed reduction and immobilization in either a below elbow volar-dorsal splint versus sugar-tong splint prior to conversion into a short arm cast. We performed a retrospective study of patients with distal radius fractures placed in a sugar-tong (n = 45) and volar-dorsal splint (n = 36). Anteroposterior and lateral radiographs were evaluated immediately after closed reduction and placement into either a sugar-tong or volar-dorsal splint. The radial inclination, radial length, volar tilt, and intra-articular displacement were measured. The average age was not significantly different between groups (Diff: 1.1years, P = 0.8766). Initial clinic follow-up radiographs illustrated significantly lower radial inclination in the sugar-tong group than volar-dorsal group (17.1 vs. 19, P = 0.0443). Follow-up mean radial length was not significantly lower in the sugar-tong than volar-dorsal group (8.4 vs. 9.2, P = 0.0858). Palmar tilt and articular step-off was not significantly different between splint types. The loss of reduction was 28.8% for the sugar-tong and 25.0% for the volar-dorsal group (P = 0.696). Our results did not demonstrate a significant difference in loss of reduction rates between the two splint groups. There was no significant difference between the sugar-tong and volar-dorsal groups in terms of loss of radial length and volar tilt. Loss of reduction was similar between groups suggesting no advantage of a volar-dorsal splint compared to a sugar-tong splint. Therapeutic level III.

Prognostic Factors Affecting Clinical Outcomes of Arthroscopic Assisted Reduction and Volar Plating through Preservation of Pronator Quadratus for Intra-Articular Distal Radius Fracture.

Background: This study aimed to evaluate the clinical and radiological outcomes following an arthroscopic-assisted reduction and volar plating (AR-VP) surgery through pronator quadratus (PQ) preservation for treating intra-articular distal radius fractures (IA-DRFs) and to assess prognostic factors that affect functional outcomes. Methods: Between March 2014 and February 2017, 54 patients who had intra-articular DRF and underwent AR-VP through the PQ preservation technique and completed 1-year follow-up were enrolled. Patients were divided into the satisfactory group (excellent and good results) and an unsatisfactory group (fair and poor results) based on the modified Mayo Wrist Scoring System (MMWS) scored at 1-year follow-up to determinate prognostic factors that affected clinical outcomes. Patients' demographics, clinical outcome measures (VAS, DASH, PRWE, etc.), and pre-and post-operative radiographic parameters were analyzed. Results: The outcomes according to MMWS were 10 excellent, 22 good, 14 fair, and 8 poor. A univariate analysis showed a significant difference between the groups (p < .05) for all radiographic parameters, sex, and the presence of an intra-articular comminution. In the multivariate analysis, female gender, presence of an intra-articular comminution, and difference of palmar articular tilt compared to uninjured wrist (> 20.1°) at trauma were considered as significant poor prognostic factors of functional outcome. Conclusions: AR-VP surgery through PQ preservation for intra-articular DRFs has reliable clinical and radiological outcomes. However, female gender, presence of an intra-articular comminution, and difference of palmar articular tilt compared to the uninjured wrist (> 20.1°) at initial injury were considered poor prognostic factors for AR-VP through PQ preservation for intra-articular DRF.

Three-Dimensional Automated Assessment of the Distal Radioulnar Joint Morphology According to Sigmoid Notch Surface Orientation

To develop reproducible 3-dimensional measurements for quantification of the distal radioulnar joint (DRUJ) morphology. We hypothesized that automated 3-dimensional measurement of the ulnar variance (UV) and the sigmoid notch (SN) angle would be comparable to those of the reference standard while overcoming some drawbacks of conventional 2-dimensional measurements. Radiological data of healthy forearm bones (radiographs and computed tomography) of 53 adult subjects were included in the study. Automated measurements were developed for assessment of the SN morphology based on 3-dimensional landmarks, incorporating subject-specific estimation of cartilage surface orientation. A common anatomical reference was defined among the different imaging modalities and a comparison of the SN angle and UV measurements was performed in radiographs, computed tomography scans, and 3-dimensional models. Finally, the 3-dimensional UV measurements were evaluated in an experimental setup using 3-dimensional printed bone models. The automated 3-dimensional measurements of SN subtypes showed a notably larger notch radius (18.9 mm) for negative SN angles compared with positive SN angles in subjects (16.9 mm). Similar UV measurements were obtained in healthy DRUJ morphologies, with a high correlation between radiographs and 3-dimensional measurements for the SN angle (0.77) and UV (0.85). In the experimental setup with pathological radial inclinations, UV was on average 1.13 mm larger in the radiographs compared with the 3-dimensional measurements, and 1.30 mm larger in the cases with pathological palmar tilts. Furthermore, UV radiograph measurements on the modified palmar tilt deviated from the 3-dimensional measurements. The developed 3-dimensional automated measurements were able to quantify morphological differences among sigmoid notch subtypes and were comparable to those of the reference standard. The developed methods do not depend on the forearm position or orientation of the distal radius and can be used for 3-dimensional quantification of DRUJ pathologies in 3-dimensional surgical planning.

Volar Locked Plating Versus Closed Reduction and Casting for Acute, Displaced Distal Radial Fractures in the Elderly: A Systematic Review and Meta-Analysis of Randomized Controlled Trials.

It remains unclear whether volar locked plating (VLP) yields a better functional outcome than closed reduction and casting (CRC) for elderly patients with an acute, displaced distal radial fracture. Our purpose was to conduct a systematic review and meta-analysis of randomized controlled trials comparing outcomes of VLP and CRC for elderly patients (age, ≥60 years). Multiple databases, including MEDLINE, were searched for randomized controlled trials evaluating outcomes following distal radial fracture treatment. Raw data were obtained for studies that included patients of all ages, and the elderly subgroup was included for analysis. The primary outcome was the Disabilities of the Arm, Shoulder and Hand (DASH) score at ≥1 year of follow-up. Secondary outcomes included the 3-month DASH score, range of motion, final radiographic alignment, and complications. Effect sizes for the comparison of each outcome between groups were pooled across studies using random-effects models with the inverse variance weighting method. Changes in DASH score were compared with a minimal clinically important difference (MCID) estimate of 10 to assess clinical relevance. Of 2,152 screened articles, 6 were included. Demographics were similar for the 274 VLP and 287 CRC patients. DASH scores were significantly better following VLP than CRC at the time of final follow-up (12 to 24 months postoperatively; score difference, -5.9; 95% confidence interval [CI], -8.7 to -3.1) and at 3 months (-8.9; 95% CI, -13.0 to -4.8). VLP yielded significantly better palmar tilt, radial inclination, and supination, with no differences in ulnar variance, flexion-extension, pronation, or total complication rates. Functional outcome was significantly better following VLP than CRC 3 months into the treatment of acute, displaced distal radial fractures in an elderly population and up to 2 years after injury. However, the observed differences in the final DASH score did not exceed published estimates of the MCID, suggesting that clinical outcomes are similar for both treatment options. Therapeutic Level I. See Instructions for Authors for a complete description of levels of evidence.

Efficacy of non-bridging external fixation in treating distal radius fractures.

ObjectiveTo investigate the efficacy of non‐bridging external fixation in treating distal radius fractures (DRF) and its effect on wrist joint function.MethodsThe medical records of 207 patients who were treated for DRF between May 2008 and April 2017 in our hospital (age, 18.0–70.0 years; 99 males and 108 females) were retrospectively analyzed. All patients had evident wrist trauma and the diagnosis of DRF was confirmed by imaging tests. A total of 101 patients received bridging external fixation (control group), whereas another 106 received non‐bridging external fixation (study group). At 12 weeks after the procedure, the treatment effect was measured using the Dienst scoring system (rating scale: ≤3 points, excellent; 4–7 points, good; 8–11 points, fair; >12 points, poor), and the wrist joint function was evaluated by Gartland and Werley classification (rating scale: 0–2 points, excellent; 3–8 points, good; 9–20 points, fair; >21 points, poor); meanwhile, the radial length, radial inclination, and palmar tilt were examined by X‐ray. Follow‐up visits were conducted once every 2 weeks for 6 months, and the incidences of complications in the two groups within 6 months after operation were recorded, including incision infection, Kirschner wire loosening, delayed fracture healing, and arthritis.ResultsThere were no differences in the sex ratio, mean age, mean injury period, Arbeitsgemeinschaft fur osteosynthesefragen classification, and cause of fracture between the two groups (all P > 0.05). In terms of the treatment effects, the study group had a higher percentage of excellent results (P < 0.001) and lower percentages of fair and poor results (P = 0.002, P = 0.001) than the control group 12 weeks after treatment, while both groups had similar percentages of good results (P = 0.109). In terms of the score of the wrist joint function, the study group had a higher proportion of excellent result than the control group 12 weeks after treatment (P = 0.029), whereas no intergroup differences in the proportion of good, fair, and poor results were observed (all P > 0.05). After follow‐up for 6 months, the incidences of incision infection, Kirschner wire loosening, delayed fracture healing, and arthritis, as well as the total complication rate were found to be similar between the two groups (all P > 0.05).ConclusionsUsing non‐bridging external fixation for treating DRF allows some level of wrist movement during the early stage of fixation, effectively maintains the radial length, radial inclination, and palmar tilt, and achieves better outcomes than bridging external fixation.

Three-Dimensional Versus Radiographic Measurements for Analyzing Extra-Articular Distal Radius Malunion

To compare the accuracy of evaluating deformity in distal radius malunions using plain radiographic measurements compared with a 3-dimensional method involving 3-dimensional computer bone models. Consecutive patients who had an extra-articular distal radius malunion were included. Standard radiographs and computed tomography scans of both wrists were performed. Palmar tilt, radial tilt, and ulnar variance were measured on radiographs. The computed tomography scan data were sent to a workstation and 3-dimensional bone surface models of the radius were created. The 3-dimensional palmar tilt, 3-dimensional radial tilt, 3-dimensional ulnar variance, and axial rotational deformity were calculated. Thirteen patients, mean age 40 years (range, 22-57 years) were included. The 3 3-dimensional values were positively correlated with their corresponding radiographic values. Nevertheless, the 3-dimesional palmar tilt and 3-dimensional radial tilt values were slightly smaller than the radiographic palmar tilt and radial tilt. The quantitative difference between the 3-dimensional method and plain radiographs was on average 2° for the dorsal deformity group and 3° for the palmar deformity group. The 3-dimensional ulnar variance was significantly higher than the radiographic ulnar variance by an average of+1.3 mm for malunions with dorsal tilt and+0.6 mm for malunions with palmar tilt. The 3-dimensional method allowed us to measure the extent of the axial rotational deformity, which was 9° on average (range, 2° to 21°). Despite small differences, measurements made on both plain radiographs and 3-dimensional computer bone models are accurate for evaluating the deformity in extra-articular distal radius malunions. Our 3-dimensional method seems to provide a more accurate measurement of ulnar variance, particularly for dorsally angulated cases, and is helpful for measuring rotational malalignment. In this study, we found that either a 3-dimensional computer bone model or plain radiographs can be used as a benchmark to evaluate the deformity of extra-articular distal radius malunion. The 3-dimensional method can also be used to define axial rotational deformity.

Radiological results of surgical management of fracture of the distal radius treated with volar locking plates

ObjectivesDistal radius fracture (DRF) is the most common upper extremity fracture. The incidence of complications after surgical treatment still remains high.The objective of our study was to assess functional and radiological results of DRF treated with volar locking plate. MethodsWe conducted a retrospective study including DRF treated by open reduction and internal fixation with a volar locking plate during a period of 8 years (2010–2018). Data were collected from clinical records and included patient demographics, fracture characteristics, radiological parameters (radial inclination, palmar tilt, ulnar variance, articular step-off), range of motion (ROM), complications and reinterventions. ResultsA total of 170 patients (63.5% female) met the inclusion criteria with a mean age of 55.9 years [24.1–83.7; 13.76]. High energy injuries were more frequent in younger patients (25.56% vs 3.95%; p < 0.0001). AO classification was: 2R3A: 23.5%, 2R3B: 24.1% and 2R3C: 52.4%. Time until surgery was 8.5 days, longer in extraarticular fractures (AO-2R3A: 12.22 days, AO-2R3B: 7.97 days, AO-2R3C: 7.04 days, p = 0.018). Younger patients had better radial inclination (excellent in 85.1% vs 59.21%, p = 0.001) and radial shortening (excellent in 100% vs 88.15%, p = 0.001).ROM was: flexion 63° [0–90°; 19.73], extension 57.67° [5–90°; 21.61], pronation 78.94° [40–90°] and supination 81.76° [38–90°; 8.87]. We found a weak correlation between ROM in flexion-extension and radial shortening (r = 0.218; p = 0.001) and articular step-off (r = −0.269; p = 0.002). We had 39 complications (21.18% of patients). 10.6% of patients needed a re-operation, being the most frequent hardware removal (6.5%) and tendinous disruptions repairs (2.4%). Reintervention rate was higher in younger patients (14.9% vs 5.3%; p = 0.042), complete articular fractures (AO-2R3A: 2.5%; AO-2R3B: 7.3%; AO-2R3C: 15.7%; p = 0.037) and high energy injuries (8.4% vs 22.2%; p = 0.044). Patients undergoing reintervention had a decreased flexion-extension (94.44° vs 123.83°, p = 0.007). ConclusionRadial shortening and articular step-off seem the most important predictors for postoperative range of motion. Worse radiological outcomes are observed in complete articular fractures and those affecting elder population.Although radiological and functional results are good or excellent in most of cases, the incidence of complications and need for reintervention still remains noticeable. Re-operations were more frequent in younger patients, complete articular fractures and high energy injuries, and it worsened functional outcomes.

Radial Reference Points for Measuring Palmar Tilt and Ulnar Variance on Lateral Wrist Radiographs.

Background: Palmar tilt and ulnar variance are crucial parameters for evaluating the distal radius. Identifying suitable reference points for these parameters on lateral wrist radiographs remains challenging. The purpose of this study was to establish reference points for measuring palmar tilt and ulnar variance on lateral wrist radiographs and to evaluate the reliability of these two parameters using the newly defined reference points. Methods: The distal articular surfaces of 25 cadaver radii were marked at four different locations using thin wires. These bones were radiographed and constant landmarks were recorded. The reliability of the palmar tilt and ulnar variance measurements was assessed using the new reference points and two serial measurements recorded by three observers on 27 standardized lateral wrist radiographs. Results: The reference points for palmar tilt on lateral radiograph were the dorsal and volar end points of the subchondral line. The subchondral line was connected to two of five metaphyseal cortical lines. The reference point for lateral ulnar variance was easily defined on the midpoint of the proximal aspect of the subchondral line. The corresponding posteroanterior central reference point for ulnar variance was at the ulnar corner of the subchondral line. Inter- and intra-observer reliabilities were overall good for the palmar tilt measurements, and excellent for the ulnar variance measurements. Conclusions: Palmar tilt can be determined accurately with a good understanding of the radiographic landmarks on lateral radiographs, and by addressing the problems caused by ulnar inclination of the articular surface of the distal radius. Lateral wrist radiographs can provide a complete picture of the ulnar border of the radius for measuring ulnar variance.

Impact of Ulnar Styloid Fractures on the Treatment Effect of Distal Radius Fractures with Volar Plate Fixation: A Case Control Study.

There is a controversy regarding whether ulnar styloid fractures affect the efficacy of treatment of distal radial fractures. The purpose of this study was to investigate whether ulnar styloid fractures impact wrist joint function in patients without distal radioulnar joint instability, after distal radial fracture fixation using a volar plate. Seventy-five patients with a distal radial fracture were treated using a volar plate between February 2010 and February 2016 (33 men and 42 women; mean age 40.9 ± 9.4years). Forty-four patients had ulnar styloid fractures (Group A) and 31 patients did not (Group B). There were no differences between the two groups with regard to sex, age, course of the disease and fracture type (P > 0.05). The mean follow-up time was 21months. There were no differences between the groups in palmar tilt, radial inclination and radial length when the distal radial fractures had healed (P > 0.05). At the final follow-up visit, the two groups were similar in terms of wrist motion range, and grip and pinch strength (P > 0.05). The Gartland-Werley scores were 13 for excellent, 26 for good, 3 for fair and 2 for poor (excellence rate 89%) for Group A, and 10 for excellent, 17 for good, 2 for fair and 2 for poor (excellence rate 87%) for Group B. The difference between the two groups was not significant (Z = - 0.097, P = 0.922). After open reduction and plate fixation of distal radial fractures, if stability of the distal radioulnar joint is achieved, untreated ulnar styloid fractures have no impact on wrist joint function.

Radial Inclination and Palmar tilt as Risk Factors for Kienböck’s Disease

Radial Inclination and Palmar tilt as Risk Factors for Kienböck’s Disease

Below-elbow or above-elbow cast for conservative treatment of extra-articular distal radius fractures with dorsal displacement: a prospective randomized trial

BackgroundDistal radial fractures are common traumatic injuries, but their management remains controversial also in case of conservative treatment regarding the type of immobilisation. Hence, we conducted a two-arm, parallel-group, prospective randomised trial to compare the capacity of long casts (above-elbow) and short casts (below-elbow) to maintain the reduction of extra-articular distal radius fractures with dorsal displacement (AO/OTA classification: 2R3A2.2).MethodsSeventy-four eligible patients with AO/OTA 2R3A2.2 fractures treated with closed reduction and cast immobilisation were randomised to the long cast group (n°= 37) or to the short cast group (n°= 37). Baseline radiological parameters, radial inclination (RI), radial height (RH), ulnar variance (UV) and palmar tilt (PT) were taken, and compared with clinical (DASH, Mayo Wrist and Mayo Elbow) and radiological scores taken at 7–10 days, 4 weeks and 12 weeks. Furthermore, to evaluate correlations between radiological parameters and functional outcomes, patients were divided into two groups according to whether or not their radiological parameters at Follow-ups 2 and 3 were acceptable, i.e. within the range 11–12 mm for RH, 16°–28° for RI, − 4–+ 2 mm for UV and 0°–22° for PT.ResultsPatient demographic and baseline radiological parameters were similar between groups. At follow-up, there were no statistically significant differences between the two types of cast in terms of RI, RH, UV or PT, or Mayo wrist or DASH scores. Short cast group patients displayed better Mayo elbow score at follow-up 2 (4 weeks), but this difference was no longer statistically significant at follow-up 3 (12 weeks). No statistically significant differences in clinical outcomes were found between patients who presented acceptable radiographic parameters at follow-up and those who did not.ConclusionAs there were no significant differences between short casts and long casts in terms of fracture reduction maintenance or clinical outcomes, short casts are an effective method of post-reduction immobilisation in AO/OTA 2R3A2.2 fracture of the radius. Radiological parameters outside the range conventionally considered acceptable do not preclude a satisfactory clinical outcome.Trial registrationClinicalTrials.gov PRS, NCT04062110. Registred 20 August 2019.

Anatomical reduction and precise internal fixation of intra-articular fractures of the distal radius with virtual X-ray and 3D printing

To evaluate and precisely internal fix intra-articular distal radial fracture (IDRF) using the virtual X-ray and three-dimensional (3D) printing technologies. Twenty-one patients with IDRF were recruited, and the data from digital design group (DDG) and real surgery group (RSG) were collected and analyzed. In DDG, the data from thin-slice computed tomography scan, virtual X-ray measurement parameters, including volar tilt, palmar tilt, radius length (D1), ulnar variation (D2), locking plate position parameter (D3) and distance between key nail and joint surface (D4) were collected. The bone was virtually fixed with the locking plate, and the final model of radius with the screw was obtained by 3D printing. In RSG, the locking plate was precisely pre-bended and used in surgery. During the surgery, the key K-wire was accurately placed and the locking plate was adjusted with the aid of the U-shaped navigation arm. The C-arm was used to observe the positions of key K-wires and the locking plate, and the same above-mentioned parameters were measured intra- and post-operatively. The data from RSG and DDG were compared statistically by t test. This approach proved to be successful in all 21 patients, and none of the screws pierced through the wrist joint surface. All the measured parameters, including the volar tilt, palmar tilt, D1–4, in RSG were not significantly different from preoperative DDG data. Virtual X-ray measurement of anatomical reduction parameters and 3D printing can help the anatomical reduction and precise internal fixation by providing quantitative references, preoperatively, intraoperatively and postoperatively.

A retrospective analysis comparing functional and radiological outcomes after treatment of unstable distal radius fractures using volar locked plate versus percutaneous fixation

&lt;p class="abstract"&gt;&lt;strong&gt;Background:&lt;/strong&gt; Distal radius fractures are one of the most routinely encountered injuries in an orthopaedic setting. Despite the wide variety of treatment options available there is still debate about the optimal way to treat these fractures. The aim was to evaluate and compare functional and radiological outcomes of unstable distal radius fractures treated by either by using volar locking compression plating (VLP) or by using percutaneous fixation augmented by Kirschner (K) wires (EF).&lt;/p&gt;&lt;p class="abstract"&gt;&lt;strong&gt;Methods:&lt;/strong&gt; A retrospective analysis was carried out on all cases of acute unstable unilateral fracture distal radius who were admitted between January 2015 and December 2017 and were treated either by VLP or EF. QuickDASH score and PRWE were documented at every follow up in OPD at 6 weeks, 6 months and 1 year post-op along with serial X-rays at immediate post-op and 01 year which were then compared.&lt;strong&gt;&lt;/strong&gt;&lt;/p&gt;&lt;p class="abstract"&gt;&lt;strong&gt;Results:&lt;/strong&gt; A total of 122 cases of fracture distal radius were selected for study which fulfilled the inclusion criteria out of which 49 were treated by VLP and 73 by EF. There was no statistical difference in QuickDASH, PRWE scores or wrist ROM between two groups at1 year follow up. However VLP group was better in maintaining palmar tilt, radial length and inclination at the end of 1 year.&lt;/p&gt;&lt;p class="abstract"&gt;&lt;strong&gt;Conclusions:&lt;/strong&gt; Both VLP and EF show comparable and predictable good outcomes in treating unstable distal radius fractures when measured in terms of ROM and clinically validated patient outcome scores at 01 year follow up with similar rate of complications.&lt;/p&gt;&lt;p&gt; &lt;/p&gt;