P4-P6 Domain Research Articles

A rapid in vitro method for obtaining RNA accessibility patterns for complementary DNA probes: correlation with an intracellular pattern and known RNA structures.

A technique is described to identify the rare sequences within an RNA molecule that are available for efficient interaction with complementary DNA probes: the target RNA is digested by RNase H in the presence of a random pool of complementary DNA fragments generated from the same DNA preparation that was used for target RNA synthesis. The DNA region was amplified by PCR, partially digested with DNase and denatured prior to RNA binding. In the presence of single-stranded DNA fragments the RNA was digested with RNase H such that, on average, each molecule was cut once. Cleavage sites were detected by gel electrophoresis either directly with end-labeled RNA or by primer extension. The pattern of accessible sites on c- raf mRNA was determined and compared with the known profile of activity of oligonucleotides found in cells, showing the merit of the method for predicting oligonucleotides which are efficient for in vivo antisense targeting. New susceptible sites in the 3'-untranslated region of c- raf mRNA were identified. Also, four RNAs were probed to ascertain to what extent structure predicts accessibility: the P4-P6 domain of the Tetrahymena group I intron, yeast tRNAAsp, Escherichia coli tmRNA and a part of rat 18S rRNA.

A magnesium ion core at the heart of a ribozyme domain.

Large ribozymes require divalent metal ions to fold. We show here that the tertiary structure of the Tetrahymena group I intron P4-P6 domain nucleates around a magnesium ion core. In the domain crystal structure, five magnesium ions bind in a three-helix junction at the centre of the molecule. Single atom changes in any one of four magnesium sites in this three-helix junction destroy folding of the entire 160-nucleotide P4-P6 domain. The magnesium ion core may be the RNA counterpart to the protein hydrophobic core, burying parts of the RNA molecule in the native structure.

Bombyx mori single repeat telomeric DNA sequence forms a G-quadruplex capped by base triads.

A combined NMR-molecular dynamics approach has been applied to determine the solution structure of a truncated analogue of the Bombyx mori telomeric d(TTAGG) single repeat sequence in Na+ cation-containing aqueous solution. The two-fold symmetric four-stranded d(TAGG) quadruplex contains two adjacent G(syn).G(syn).G(anti).G(anti) G-tetrads sandwiched between novel (T.A).A triads with individual strands having both a parallel and antiparallel neighbour around the quadruplex. The (T.A).A triad represents the first experimental verification of a base triad alignment which constitutes a key postulate in the recently proposed model of triad-DNA. Further, the (T.A).A triad is generated by positioning an A residue through hydrogen bonding in the minor groove of a Watson-Crick T.A base pair and includes a T-A platform related to an A-A platform recently observed in the structure of the P4-P6 domain of the Tetrahymena self splicing group I ribozyme. The novel architecture of the truncated Bombyx mori quadruplex structure sets the stage for the design and potential identification of additional base tetrads and triads that could participate in pairing alignments of multi-stranded DNA structures during chromosome association and genetic recombination.

The P4-P6 domain directs higher order folding of the Tetrahymena ribozyme core.

The active site of group I self-splicing introns occurs at the interface of two proposed structural domains. In the Tetrahymena intron, half of the catalytic core resides within the independently-folding P4-P6 domain while the other half belongs to a putative domain that includes helices P3, P7, P8, and P9 (P3-P9). To determine whether the P3-P9 region of the intron can also fold independently, we used Fe(II)-EDTA and dimethyl sulfate to probe the solvent accessibility of separate fragments of the Tetrahymena intron. These RNAs self-assemble into an active complex in trans, enabling analysis of their structural features both alone and within the complex. Our results show that while the P3-P9 region of the intron retains its secondary structure, most of the tertiary interactions within this region do not form stably in the absence of the P4-P6 domain. This indicates that the P4-P6 domain induces folding in the P3-P9 region, organizing the catalytic cleft between them. Thus the P4-P6 domain provides a scaffold for the folding of the Tetrahymena intron core.

Time-resolved synchrotron X-ray “footprinting”, a new approach to the study of nucleic acid structure and function: application to protein-DNA interactions and RNA folding

Hydroxyl radicals (. .OH) can cleave the phosphodiester backbone of nucleic acids and are valuable reagents in the study of nucleic acid structure and protein-nucleic acid interactions. Irradiation of solutions by high flux “white light” X-ray beams based on bending magnet beamlines at the National Synchrotron Light Source (NSLS) yields sufficient concentrations of . .OH so that quantitative nuclease protection (“footprinting”) studies of DNA and RNA can be conducted with a duration of exposure in the range of 50 to 100 ms. The sensitivity of DNA and RNA to X-ray mediated . .OH cleavage is equivalent. Both nucleic acids are completely protected from synchrotron X-ray induced cleavage by the presence of thiourea in the sample solution, demonstrating that cleavage is suppressed by a free radical scavenger. The utility of this time-dependent approach to footprinting is demonstrated with a synchrotron X-ray footprint of a protein-DNA complex and by a time-resolved footprinting analysis of the Mg2+-dependent folding of the Tetrahymena thermophilia L-21 ScaI ribozyme RNA. Equilibrium titrations reveal differences among the ribozyme domains in the cooperativity of Mg2+-dependent . .OH protection. RNA . .OH protection progress curves were obtained for several regions of the ribozyme over timescales of 30 seconds to several minutes. Progress curves ranging from ≥3.5 to 0.4 min–1 were obtained for the P4-P6 and P5 sub-domains and the P3-P7 domain, respectively. The . .OH protection progress curves have been correlated with the available biochemical, structural and modeling data to generate a model of the ribozyme folding pathway. Rate differences observed for specific regions within domains provide evidence for steps in the folding pathway not previously observed. Synchrotron X-ray footprinting is a new approach of general applicability for the study of time-resolved structural changes of nucleic acid conformation and protein-nucleic acid complexes.

Metal-binding sites in the major groove of a large ribozyme domain

Background Group I self-splicing introns catalyze sequential transesterification reactions within an RNA transcript to produce the correctly spliced product. Often several hundred nucleotides in size, these ribozymes fold into specific three-dimensional structures that confer activity. The 2.8 å crystal structure of a central component of the Tetrahymena thermophila group I intron, the 160-nucleotide P4–P6 domain, provides the first detailed view of metal binding in an RNA large enough to exhibit side-by-side helical packing. The long-range contacts and bound ligands that stabilize this fold can now be examined in detail. Results Heavy-atom derivatives used for the structure determination reveal characteristics of some of the metal-binding sites in the P4–P6 domain. Although long-range RNA–RNA contacts within the molecule primarily involve the minor groove, osmium hexammine binds at three locations in the major groove. All three sites involve G and U nucleotides exclusively; two are formed by G.U wobble base pairs. In the native RNA, two of the sites are occupied by fully-hydrated magnesium ions. Samarium binds specifically to the RNA by displacing a magnesium ion in a region critical to the folding of the entire domain. Conclusions Bound at specific sites in the P4–P6 domain RNA, osmium (III) hexammine produced the high-quality heavy-atom derivative used for structure determination. These sites can be engineered into other RNAs, providing a rational means of obtaining heavy-atom derivatives with hexammine compounds. The features of the observed metal-binding sites expand the known repertoire of ligand-binding motifs in RNA, and suggest that some of the conserved tandem G.U base pairs in ribosomal RNAs are magnesium-binding sites.

Crystal structure of a group I ribozyme domain: principles of RNA packing.

Group I self-splicing introns catalyze their own excision from precursor RNAs by way of a two-step transesterification reaction. The catalytic core of these ribozymes is formed by two structural domains. The 2.8-angstrom crystal structure of one of these, the P4-P6 domain of the Tetrahymena thermophila intron, is described. In the 160-nucleotide domain, a sharp bend allows stacked helices of the conserved core to pack alongside helices of an adjacent region. Two specific long-range interactions clamp the two halves of the domain together: a two-Mg2+-coordinated adenosine-rich corkscrew plugs into the minor groove of a helix, and a GAAA hairpin loop binds to a conserved 11-nucleotide internal loop. Metal- and ribose-mediated backbone contacts further stabilize the close side-by-side helical packing. The structure indicates the extent of RNA packing required for the function of large ribozymes, the spliceosome, and the ribosome.

A Tyrosyl-tRNA Synthetase Suppresses Structural Defects in the Two Major Helical Domains of the Group I Intron Catalytic Core

The Neurospora crassamitochondrial tyrosyl-tRNA synthetase, the CYT-18 protein, functions in splicing group I introns by promoting the formation of the catalytically active structure of the intron RNA. The group I intron catalytic core is thought to consist of two extended helical domains, one formed by coaxial stacking of P5, P4, P6, and P6a (P4-P6 domain) and the other consisting of P8, P3, P7, and P9 (P3-P9 domain). To investigate how CYT-18 stabilizes the active RNA structure, we used an Escherichia coligenetic assay based on the phage T4 tdintron to systematically test the ability of CYT-18 to compensate for structural defects in three key regions of the catalytic core: J3/4 and J6/7, connecting regions that form parts of the triple-helical-scaffold structure with the P4-P6 domain, and P7, a long- range base-pairing interaction that forms the guanosine-binding site and is part of the P3-P9 domain. Our results show that CYT-18 can suppress numerous mutations that disrupt the J3/4 and J6/7 nucleotide-triple interactions, as well as mutations that disrupt base-pairing in P7. CYT-18 suppressed mutations of phylogenetically conserved nucleotide residues at all positions tested, except for the universally conserved G-residue at the guanosine-binding site. Structure mapping experiments with selected mutant introns showed that the CYT-18-suppressible J3/4 mutations primarily impaired folding of the P4-P6 domain, while the J6/7 mutations impaired folding of both the P4-P6 and P3-P9 domains to various degrees. The P7 mutations impaired the formation of both P7 and P3, thereby grossly disrupting the P3-P9 domain. The finding that the P7 mutations also impaired formation of P3 provides evidence that the formation of these two long-range pairings is interdependent in the tdintron. Considered together with previous work, the nature of mutations suppressed by CYT-18 supports a model in which CYT-18 helps assemble the P4-P6 domain and then stabilizes the two major helical domains of the catalytic core in the correct relative orientation to form the intron's active site.

Analysis of the CYT-18 Protein Binding Site at the Junction of Stacked Helices in a Group I Intron RNA by Quantitative Binding Assays and in vitroSelection

The Neurospora crassamitochondrial tyrosyl-tRNA synthetase (CYT-18 protein) functions in splicing group I introns by promoting the formation of the catalytically active structure of the intron RNA. Previous studies showed that CYT-18 binds with high affinity to the P4-P6 domain of the catalytic core and that there is some additional contribution to binding from the P3-P9 domain. Here, quantitative binding assays with deletion derivatives of the N. crassamitochondrial large rRNA intron showed that at least 70% of the binding energy can be accounted for by the interaction of CYT-18 with the P4-P6 domain. Within this domain, P4 and P6 are required for high affinity CYT-18 binding, while the distal elements P5 and P6a may contribute indirectly by stabilizing the correct structure of the binding site in P4 and P6. CYT-18 binds to a small RNA corresponding to the isolated P4-P6 domain, but not to a permuted version of this RNA in which P4-P6 is a continuous rather than a stacked helix. Iterative in vitroselection experiments with the isolated P4-P6 domain showed a requirement for base-pairing to maintain helices P4, P6 and P6a, but indicate that P5 is subject to fewer constraints. The most strongly conserved nucleotides in the selections were clustered around the junction of the P4-P6 stacked helix, with ten nucleotides (J3/4-2,3, P4 bp -1 and 3, and P6 bp -1 and 2) found invariant in the context of the wild-type RNA structure. In vitromutagenesis confirmed that replacement of the wild-type nucleotides at J3/4-2 and 3 or P4 bp-3 markedly decreased CYT-18 binding, reflecting either base specific contacts or indirect readout of RNA structure by the protein. Our results suggest that a major function of CYT-18 is to promote assembly of the P4-P6 domain by stabilizing the correct geometry at the junction of the P4-P6 stacked helix. The relatively large number of conserved nucleotides at the binding site suggests that the interaction of CYT-18 with group I introns is unlikely to have arisen by chance and could reflect either an evolutionary relationship between group I introns and tRNAs or interaction with a common stacked-helical structural motif that evolved separately in these RNAs.

A Tyrosyl-tRNA Synthetase Protein Induces Tertiary Folding of the Group I Intron Catalytic Core

The Neurospora crassamitochondrial tyrosyl-tRNA synthetase (CYT-18 protein) functions in splicing group I introns. We have used chemical-structure mapping and footprinting to investigate the interaction of the CYT-18 protein with the N. crassamitochondrial large subunit ribosomal RNA (mt LSU) and ND1introns, which are not detectably self-splicing in vitro. Our results show that both these non-self-splicing introns form most of the short range pairings of the conserved group I intron secondary structure in the absence of CYT-18, but otherwise remain largely unfolded, even at high Mg 2 +concentrations. The binding of CYT-18 promotes the formation of the extended helical domains P6a-P6-P4-P5 (P4-P6 domain) and P8-P3-P7-P9 (P3-P9 domain) and their interaction to form the catalytic core. In iodine-footprinting experiments, CYT-18 binding results in the protection of regions of the phosphodiester backbone expected for tertiary folding of the catalytic core, as well as additional protections that may reflect proximity of the protein. In both introns, most of the putative CYT-18 protection sites are in the P4-P6 domain, the region of the SU intron previously shown to bind CYT-18 as a separate RNA molecule, but additional sites are found in the other major helical domain in P8 and P9 in both introns and in L9 and P7.1/P7.1a in the mt LSU intron. Protease digestion of the CYT-18/intron RNA complexes results in the loss of CYT-18-induced RNA tertiary structure and splicing activity. Considered together with previous studies, our results suggest that CYT-18 binds initially to the P4-P6 region of group I introns to form a scaffold for the assembly of the P3-P9 domain, which may contain additional binding sites for the protein. A three-dimensional model structure of the CYT-18-binding site in group I introns indicates that CYT-18 interacts with the surface of the catalytic core on the side opposite the active-site cleft and may primarily recognize a specific three-dimensional geometry of the phosphodiester backbone of group I introns.

Coaxially stacked RNA helices in the catalytic center of the Tetrahymena ribozyme.

Coaxial stacking of helical elements is a determinant of three-dimensional structure in RNA. In the catalytic center of the Tetrahymena group I intron, helices P4 and P6 are part of a tertiary structural domain that folds independently of the remainder of the intron. When P4 and P6 were fused with a phosphodiester linkage, the resulting RNA retained the detailed tertiary interactions characteristic of the native P4-P6 domain and even required lower magnesium ion concentrations for folding. These results indicate that P4 and P6 are coaxial in the P4-P6 domain and, therefore, in the native ribozyme. Helix fusion could provide a general method for identifying pairs of coaxially stacked helices in biological RNA molecules.

Two major tertiary folding transitions of the Tetrahymena catalytic RNA.

The L-21 Tetrahymena ribozyme, an RNA molecule with sequence-specific endoribonuclease activity derived from a self-splicing group I intron, provides a model system for studying the RNA folding problem. A 160 nucleotide, independently folding domain of tertiary structure (the P4-P6 domain) comprises about half of the ribozyme. We now apply Fe(II)-EDTA cleavage to mutants of the ribozyme to explore the role of individual structural elements in tertiary folding of the RNA at equilibrium. Deletion of peripheral elements near the 3' end of the ribozyme destabilizes a region of the catalytic core (P3-P7) without altering the folding of the P4-P6 domain. Three different mutations within the P4-P6 domain that destabilize its folding also shift the folding of the P3-P7 region of the catalytic core to higher MgCl2 concentrations. We conclude that the role of the extended P4-P6 domain and of the 3'-terminal peripheral elements is at least in part to stabilize the catalytic core. The organization of RNA into independently folding domains of tertiary structure may be common in large RNAs, including ribosomal RNAs. Furthermore, the observation of domain-domain interactions in a catalytic RNA supports the feasibility of a primitive spliceosome without any proteins.

Visualization of a Tertiary Structural Domain of the Tetrahymena Group I Intron by Electron Microscopy

The P4-P6 domain RNA of the group I intron of Tetrahymena thermophila has previously been shown by chemical probing to be an independently folding domain of the intron's tertiary structure. To directly visualize this tertiary structure, the P4-P6 domain and two folding defective mutants were prepared for high-resolution electron microscopy using tungsten shadowcasting. In the presence of Mg 2+, the P4-P6 domain predominantly consists of compact molecules, while the two mutant RNAs are nearly all rod-like molecules. The measured length of the rod-like molecules is 64(±6) bp, which agrees closely with the length expected for molecules containing secondary structure only. In the absence of Mg 2+, the P4-P6 domain contains threefold or tenfold fewer compact structures (depending on the mounting procedures) than in the presence of Mg 2+. These results provide direct evidence for the overall shape of the tertiary structure proposed on the basis of biochemical experiment, and they confirm the Mg 2+ dependence of tertiary folding. An equilibrium between the extended (rod-like) and the compact structures is suggested, with the concentration of bound Mg 2+ and different mounting methods influencing the direction of the equilibrium. The entire group I ribozyme (L-21 Sca I RNA) was also examined by electron microscopy in the presence of Mg 2+, and was revealed to have a compact shape. These studies present a direct demonstration of long-range interactions in a catalytic RNA molecule.

GAAA Tetraloop and Conserved Bulge Stabilize Tertiary Structure of a Group I Intron Domain

The 413 nucleotide self-splicing group I intron from Tetrahymena thermophila pre-rRNA contains a 160 nucleotide independently folding domain of RNA tertiary structure, the P4-P6 domain. This domain consists of sequence elements highly conserved among group I introns (P4 and P6) and peripheral extensions conserved in certain subgroups of these introns (P5abc and P6ab). The effect of mutation of selected bases on the formation of domain structure was analyzed using two probes: solvent-based Fe(II)-EDTA, which monitors backbone accessibility and dimethyl sulfate, which monitors availability of N (1) of adenine and N (3) of cytosine. A GAAA tetraloop and an adenosine-rich bulge were found to stabilize domain tertiary structure in a sequence-specific manner. A single base change in the GAAA tetraloop disrupted Fe(II)-EDTA protection both locally and in P6a, and a specific base-pair substitution in P6a similarly disrupted protection locally and in the tetraloop; thus remote elements of the secondary structure are linked in tertiary structure. Our model of the domain's tertiary structure is refined to include this long-range tertiary interaction. The interaction requires severe bending of the domain RNA such that sequences separated by approximately 50 bases of largely double-stranded RNA are in proximity in the tertiary structure. The bending causes or allows for contact between sequences of the conserved core and sequences of the P5 extension. Thus the P5 extension may serve to stabilize the structure of the intron core in vivo.

An independently folding domain of RNA tertiary structure within the Tetrahymena ribozyme.

The Tetrahymena thermophila pre-rRNA contains a 413-nucleotide self-splicing group I intron. This intron has been converted into a sequence-specific endonuclease or ribozyme. A 160-nucleotide portion of the ribozyme consisting of both highly conserved sequence elements (P4 and P6) and nonconserved peripheral extensions (P5abc and P6ab) was synthesized as a separate molecule. Solvent-based Fe(II)-EDTA, a probe that monitors higher-order RNA structure, revealed a protection pattern that was a large subset of that observed in the whole ribozyme. Data from dimethyl sulfate modification and partial digestion with nucleases were also consistent with maintenance of the proper secondary and tertiary structure in the shortened RNA molecule. Thus, this 160-nucleotide molecule (P4-P6 RNA) is an independently folding domain of RNA tertiary structure. A series of mutations and deletions were made within the P4-P6 domain to further dissect its tertiary structure. Fe(II)-EDTA and dimethyl sulfate analysis of these mutants revealed that the domain consists of two substructures, a localized subdomain involving the characteristic adenosine-rich bulge in P5a, and a subdomain-stabilized structure involving long-range interactions. Therefore, like some proteins, the intron RNA is modular, containing a separable domain and subdomain of tertiary structure.