P1 Prophage Research Articles

Comparison of three nonradioactive and a radioactive DNA probe for the detection of target DNA by DNA hybridization

The specificity and sensitivity of three methods for the preparation and detection of nonradioactive probe DNA (biotin-nick translation, biotin-photolabel, and antigen-chemical linkage) were evaluated and compared with a nick-translated32P-labeled DNA probe in DNA hybridization studies. The DNA probes were prepared from a restriction fragment (HindIII-3) from bacteriophage P1 DNA, and target DNA consisted of purified phage P1 DNA or P1 prophage DNA in lysogens ofEscherichia coli. A probe concentration of 50 ng/ml resulted in clear detection with the three nonradioactiveHindIII-3 DNA probes, whereas the specificity of the32P-HindIII-3 DNA probe was satisfactory at a concentration of 25 ng/ml. However, the detection of false positives was greater with the32P-labeled probe. The sensitivity of the radiolabeled DNA probe was marginally greater than that of the nonradioactive probes in dot blot hybridizations with purified phage P1 DNA. However, when the preparation time, ease of use, safety, duration of storage, and expense were compared for the four methods of labeling, the nonradiolabeled probes were generally superior to the radiolabeled probe.

The c1 repressor inactivator protein coi of bacteriophage P1. Cloning and expression of coi and its interference with c1 repressor function.

The immC region of bacteriophage P1 contains the c1 repressor gene and its upstream region with four c1-controlled operators and four open reading frames. A c1 inactivator gene, coi, was defined by mutations in immC that suppress the virulence of the P1virC mutation. The exact location of the coi gene was not known (Scott, J.R. (1980) Curr. Top. Microbiol. Immunol. 90, 49-65). When a variety of P1 immC fragments were inserted into an expression vector, a gene product was inducible for the open reading frame 4 only. We identify this product as the c1 inactivator protein, coi by the following criteria: (a) expression of coi from a recombinant plasmid induces the P1 prophage and inhibits lysogenization of sensitive bacteria by P1; (b) all c1-controlled operator-promoter elements tested in vivo are derepressed by coi; (c) a partially purified coi protein (apparent molecular weight = 4800) interacts with c1 repressor and inhibits its binding to the operator in vitro. Based on these results we refine a model for the regulation of those genes and elements within immC which participate in the decision of P1 to enter the lytic or lysogenic pathway.

A family of ATPases involved in active partitioning of diverse bacterial plasmids

Low copy-number bacterial plasmids F (the classical Escherichia coli sex factor) and prophage P1 encode partitioning functions which may provide fundamental insights into the active processes which ensure that bacterial genomes are segregated to both daughter cells prior to cell division. These partitioning systems involve two proteins: ParA and ParB. We report that incC from the broad host-range plasmid RK2 is a member of the family of ParA partitioning proteins and that these proteins (as well as related proteins encoded by plasmids from Agrobacterium tumefaciens and Chlamydia trachomatis) contain type I nucleotide-binding motifs. Also, we show that the cell division inhibitor MinD is homologous to members of the ParA family. Sequence comparisons of ParB proteins suggest that they may contain sites for phosphorylation. We propose that ATP hydrolysis by the ParA protein may result in phosphorylation of the ParB protein, thereby causing a conformational shift necessary to separate paired plasmid molecules at the cell division plane.

Participation of Escherichia coli heat shock proteins DnaJ, DnaK, and GrpE in P1 plasmid replication.

Low-copy-number plasmids, such as P1 prophage and the fertility factor F, require a plasmid-encoded replication protein and several host products for replication. Stable maintenance also depends on active partitioning of plasmids into daughter cells. Mini-P1 par+ and par plasmids were found to be destabilized by mutations in the dnaJ, dnaK, and grpE genes of Escherichia coli. The transformation efficiency and stability of mini-F plasmids were also reduced in the mutant strains. These results indicate that heat shock proteins DnaJ, DnaK, and GrpE play roles in the replication of plasmid P1 and probably also in of F.

Participation of the lytic replicon in bacteriophage P1 plasmid maintenance.

P1 bacteriophage carries at least two replicons: a plasmid replicon and a viral lytic replicon. Since the isolated plasmid replicon can maintain itself stably at the low copy number characteristic of intact P1 prophage, it has been assumed that this replicon is responsible for driving prophage replication. We provide evidence that when replication from the plasmid replicon is prevented, prophage replication continues, albeit at a reduced rate. The residual plasmid replication is due to incomplete repression of the lytic replicon by the c1 immunity repressor. Incomplete repression was particularly evident in lysogens of the thermoinducible P1 c1.100 prophage, whose replication at 32 degrees C remained almost unaffected when use of the plasmid replicon was prevented. Moreover, the average plasmid copy number of P1 in a P1 c1.100 lysogen was elevated with respect to the copy number of P1 c1+. The capacity of the lytic replicon to act as an auxiliary in plasmid maintenance may contribute to the extraordinary stability of P1 plasmid prophage.

The superimmunity gene sim of bacteriophage P1 causes superinfection exclusion

Previous work has shown that the sim gene of bacteriophage P1, if cloned into a multicopy vector, confers immunity against P1 infection to cells. We show that a 1.85-kb DNA fragment from the sim region of P1 (in the multicopy plasmid pMK4) expresses immunity and encodes three proteins with molecular weights of about 25, 24, and 15 kDa. Deletion of 650 bp from the sim region abolished synthesis of all three proteins and of the sim phenotype. Expression of sim did not prevent adsorption of P1 to cells. Successful transfection with linear P1 DNA suggests that the recombinational circularization of P1 DNA is not inhibited in the presence of sim. Plasmid pMK4 and a P1 prophage can be induced maintained in the cell indicating that replication of the prophage is not disturbed by sim. The prophage can be induced in the presence of sim. This shows that the sim phenotype is not caused by preventing lytic replication or phage maturation. In cells with pMK4 there is no expression of genes from infecting phages and transduction frequency is drastically reduced. We suggest that sim functions as a superinfection exclusion system by preventing transfer of DNA from the adsorbed phages into the cytoplasm.

Bacteriophage P1 tail-fibre and dar operons are expressed from homologous phage-specific late promoter sequences

Two plasmid systems, containing the easily assayable galK and lacZ functions, were employed to study the regulation of the bacteriophage P1 tail-fibre and dar operons. Various P1 DNA fragments carrying either the 5′ end of lydA (the 1st gene in the dar operon) or the tail-fibre gene 19 precede the promoterless coding region of galK or were fused, in-frame, to the lacZ gene. In the presence of an induced P1 prophage, GalK and LacZ activities were both detected after a 20 to 30 minute lag period, indicating that the dar and tail-fibre operons are expressed from positively regulated, late promoters. The corresponding DNA region of the closely related p15B plasmid exhibits comparable promoter properties. Deletion analysis mapped the promoter of a gene 19-lacZ fusion to a DNA region upstream from gene R, an open reading frame that precedes the coding frame of gene 19. The tail-fibre gene thus forms the second gene in a three gene operon (genes R, 19 ( S) and U). Sequence comparison between this promoter region, upstream sequences of the lydA gene and the corresponding portions of the p15B genome allowed the identification of a highly conserved 38 base-pair sequence, which most likely represents a P1-specific late promoter. This was confirmed by 5′ mapping of P1 mRNA. Transcription of both the tail-fibre and dar operons is initiated at sites five and six base-pairs, respectively, downstream from the first conserved nucleotide of this sequence. The conserved motif consists of a standard Escherichia coli −10 region followed by a nine base-pair palindromic sequence located centrally about position −22.

Three Additional Operators, Op21, Op68, and Op88, of Bacteriophage P1: Evidence for control of the P1 dam methylase by Op68

The repressor of bacteriophage P1, encoded by the c1 gene, is responsible for maintaining the P1 prophage in the lysogenic state. Previously, 11 c1 repressor binding sites or operators scattered over the whole genome of P1 have been found. From sequence analysis an asymmetric, 17-base pair consensus sequence, ATTGCTCTAATAAATTT, was derived. Using a synthetic 15-base-long oligodeoxyribonucleotide as operator probe, we have identified three additional operators. We have mapped the operators at the positions 21,68, and 88 of the P1 genome and determined their sequence. These operators are controlled by c1 because corresponding P1 DNA fragments (i) require c1 repressor in vivo in order to be clonable in multicopy plasmids, (ii) exhibit a c1-repressible promoter activity, (iii) are retarded by c1 repressor protein during electrophoresis, and (iv) contain the 17-base pair consensus sequence with one mismatch base each. Furthermore, we suggest that expression of the DNA adenine methylase (dam) encoded by P1 is controlled via Op68.

Ban Operon of bacteriophage P1 : Mutational analysis of the c1 repressor-controlled operator

The repressor of bacteriophage P1, encoded by the c1 gene, represses the phage lytic functions and is responsible for maintaining the P1 prophage in the lysogenic state. The c1 repressor interacts with at least 11 binding sites or operators widely scattered over the P1 genome. From these operators, a 17 base-pair asymmetric consensus sequence, ATTGCTCTAATAAATTT, was derived. Here, we show that the operator, Op72 of the P1 ban operon consists of two overlapping 17 base-pair sequences a and b forming an incomplete palindrome. Op72a matches the consensus sequence, whereas Op72b contains two mismatches. The evidence is based on the sequence analysis of 27 operator mutants constitutive for ban expression. They were identified as single-base substitutions at positions 2 to 10 of Op72a (26 mutants) and at position 8 of Op72b (one mutant). We conclude from gel retardation and footprinting studies that two repressor molecules bind to the operator and that positions 4, 5 and 7 to 10 of the operator play an essential role in repressor recognition.

Inhibition of gene expression of T7-related phages by prophage P1.

The gene expression of nine phages of the T7 group was compared after infection of Escherichia coli B(P1). With the exception of phage 13a which grew normally, all of them infected E. coli B(P1) abortively. Differences were found in the efficiency of host killing which ranged from 100% for phage 13a to 37% for phage A1122. Infection by T7 prevented colony formation by about 70% of the cells but they showed filamentous growth until about 2 h after infection. It was shown by SDS-polyacrylamide gel electrophoresis and autoradiography of [35S]methionine-labelled phage-coded proteins that all phages except for 13a showed measurable expression only of the early genes. No correlation was observed between killing capacity and the pattern of gene expression, and the ability to hydrolyse S-adenosyl-methionine (SAM, a cofactor for the P1 restriction endonuclease) by means of a phage-coded SAMase. Mixed infection of E. coli B(P1) with 13a and T7 yielded mixed progeny indistinguishable from that observed after mixed infection of the normal host E. coli B. Genetic crosses with amber mutants of 13a and T7 showed that the 13a marker opo+ (overcomes P one), required for growth on B(P1), is located in the early region, to the left of gene 1 (RNA polymerase gene).

Packaging specific segments of the Salmonella chromosome with locked-in Mud-P22 prophages.

Hybrid genetic elements, Mud-P and Mud-Q (collectively, Mud-P22s), have been constructed that carry two-thirds of the temperate Salmonella phage P22 genome sandwiched between the ends of transposon Mu. Insertions of these elements in the Salmonella chromosome generate locked-in P22 prophages that cannot excise. Upon induction (as a consequence of the inactivation of P22 c2 repressor), a locked-in prophage replicates its DNA in situ, resulting in the amplification of neighboring regions of the chromosome and the processive packaging of three contiguous headsful of adjacent DNA in one direction from the P22 packaging site, pac. Phage particles in an induced lysate of a Mud-P22 lysogen contain DNA molecules corresponding to several minutes of chromosomal DNA adjacent to the site of prophage insertion and transduce nearby genetic markers with high efficiencies. Mud-P22 prophages have been introduced into an F' episome by transposition; resident Mud insertions on the Salmonella chromosome may be converted to Mud-P22 insertions by homologous recombination in P22-mediated transductional crosses.

Characterization of the binding sites of c1 repressor of bacteriophage P1 : Evidence for multiple asymmetric sites

The repressor of bacteriophage P1, encoded by the c1 gene, is responsible for maintaining a P1 prophage in the lysogenic state. In this paper we present: (1) the sequence of the rightmost 943 base-pairs of the P1 genetic map that includes the 5′-terminal 224 basepairs of the c1 gene plus its upstream region; (2) the construction of a plasmid that directs the production of approximately 5% of the cell's protein as P1 repressor; (3) a deletion analysis that establishes the startpoint of P1 repressor translation; (4) filter binding experiments that demonstrate that P1 repressor binds to several regions upstream from the c1 gene; (5) DNase I footprint experiments that directly identify two of the P1 repressor binding sites. Sequences very similar to the identified binding sites occur in at least 11 sites in P1, in most cases near functions known, or likely, to be controlled by repressor. From these sites we have derived the consensus binding site sequence ATTGCTCTAATAAATTT. We suggest that, unlike other phage operators, the P1 repressor binding sites lack rotational symmetry.

Requirement of the Escherichia coli dnaA gene function for ori-2-dependent mini-F plasmid replication.

The mini-F plasmids pSC138, pKP1013, and pKV513 were unable to transform Escherichia coli cells with a dnaA-defective mutation under nonpermissive conditions. The dnaA defect was suppressed for host chromosome replication either by the simultaneous presence of the rnh-199 (amber) mutation or by prophage P2 sig5 integrated at the attP2II locus on the chromosome, both providing new origins for replication independent of dnaA function. The dnaA mutations tested were dnaA17, dnaA5, and dnaA46. dnaA5 and dnaA46 are missense mutations. dnaA17 is an amber mutation whose activity is controlled by the temperature-sensitive amber suppressor supF6. Under permissive conditions in which active DnaA protein was available, the mini-F plasmids efficiently transformed the cells. However, the transformants lost the plasmid as the cells multiplied under conditions in which DnaA protein was inactivated or its synthesis was arrested. As controls, plasmids pSC101 and pBR322 were examined along with mini-F; pSC101 behaved in the same manner as mini-F, showing complete dependence on dnaA for stable maintenance, whereas pBR322 was indifferent to the dnaA defect. Thus, ori-2-dependent mini-F plasmid replication seems to require active dnaA gene function. This notion was strengthened by the results of deletion analysis which revealed that integrity of at least one of the two DnaA boxes present as a tandem repeat in ori-2 was required for the origin activity of mini-F replication.

Regulation of the ban gene containing operon of prophage P1.

A physical map of the ban gene of P1 and sites relevant to its regulation has been deduced from cloning of the appropriate regions of P1 wild-type and of P1 ban regulatory mutants. The cloning required the presence of P1 repressor in the cell confirming the existence of a repressible ban operon (Austin et al. 1978). Evidence for additional member(s) of that operon is presented. Of particular interest for understanding the regulation of ban are the relative positions of a binding site for the P1 repressor and of the regulatory mutations bac and crr that render ban expression constitutive. The results reveal a repressible operon-like structure of about 4 kb within the P1 EcoRI-3 fragment that comprises a c1 repressor binding site/bac - additional gene(s) - crr/ban in the clockwise direction of the circular map of P1.

Organization and expression of the satellite bacteriophage P4 late gene cluster

The satellite bacteriophage P4 genes for capsid size determination ( sid), transactivation (δ), and polarity suppression ( psu) are cotranscribed at late times after infection from a single P4 late promoter (P sid) that lies to the left of the sid gene. While the −10 region of this promoter is similar to the consensus sequence for Escherichia coli RNA polymerase, the −35 region shares no homology with known classes of E. coli promoters. The −10 and −35 regions of P sid share no homology with the late gene promoters of helper phage P2. Nonetheless, P4 late transcription is stimulated by coinfecting P2, as well as by P2 prophage. This stimulation depends on the P2 encoded transcription factor ogr; transcription from P sid is stimulated following the induction of the P2 ogr gene carried on a plasmid. P4 late transcription in the absence of P2 requires the P4 δ product, which is partially homologous to the P2 ogr gene product. DNA sequence analysis shows that the psu gene codes for a protein of M r = 21,314 that is unrelated to the antitermination gene products of the lambdoid phages.

Sequence relations among the IncY plasmid p15B, P1, and P7 prophages

Electron microscopic analysis of heteroduplex molecules between the 94-kb plasmid p15B and the 92-kb phage P1 genome revealed nine regions of nonhomology, eight substitutions, and two neighboring insertions. Overall, the homologous segments correspond to 83% of the P1 genome and 81% of p 15B. Heteroduplex molecules between p 15B and the 99-kb phage P7 genome showed nonhomology in eight of the same nine regions; in addition, two new nonhomologous segments are present and P7 carries a 5-kb insertion representing Tn 902. The DNA homology between those two genomes amounts to 79% of P7 DNA and 83% of p15B. Plasmid p15B contains two stem-loop structures. One of them has no equivalent structure on P1 and P7 DNA. The other substitutes the invertible C segments of P1 and P7 and their flanking sequences including cin, the gene for the site-specific recombinase mediating inversion.

A phage P1 function that stimulates homologous recombination of the Escherichia coli chromosome.

Recombination between two different defective lacZ genes in the Escherichia coli chromosome (lac- X lac- recombination) was stimulated 2- to 8-fold by prophage P1, depending on the nature of the phage c1 repressor. The P1 BamHI restriction fragment B8 in a lambda-P1:B8 hybrid phage, stimulated lac- X lac- recombination 90-fold in the absence of P1 repressor. A gene necessary for recombination enhancement, designated ref, was localized to one end of B8. Ref expression from lambda-P1:B8 was repressed in trans by a P1 c+ prophage. Two P1 regulatory mutations, bof and lxc, derepressed prophage expression of ref and depressed a prophage function that complemented an E. coli mutant (ssb) deficient in the single-stranded DNA binding protein. Ref stimulation was dependent on preexisting E. coli recombination functions (RecA-RecBC and RecA-RecF). However, other (phage and plasmid) recombination processes involving these functions were not stimulated. ref::Tn5 phages plated and formed lysogens normally. Thus ref appears to be an integral, but not essential, phage gene that stimulates recombination of the host chromosome specifically.

IS1-dependent generation of high-copy-number replicons from bacteriophage P1 Ap Cm as a mechanism of gene amplification

Mutant P1 Ap Cm lysogens were isolated in which the drug resistance genes resident on the plasmid prophage P1 Ap Cm are amplified by a novel mechanism. The first step required for amplification is IS1-mediated rearrangement of the P1 Ap Cm prophage. The drug resistance genes are amplified from the rearranged P1 Ap Cm prophage by the formation of a plasmid (P1dR) which contains the two resistance genes. The P1dR plasmid is an independent replicon about one-half the size of P1 Ap Cm that can be maintained at a copy number eightfold higher than that at which P1 Ap Cm can be maintained. It contains no previously identified replication origin and is dependent on the Rec+ function of the host.

Bacteriophage P1 cre gene and its regulatory region : Evidence for multiple promoters and for regulation by DNA methylation

The bacteriophage P1 site-specific recombination system consists of two components, a site, loxP, at which recombination occurs, and a recombinase protein, Cre. In this paper, we present the DNA sequence of the cre structural gene and its upstream regulatory region. Analysis of the sequence indicates: (1) that cre encodes a protein of 343 amino acids; (2) that cre and loxP are separated by a 434 base-pair region that contains a 73 amino acid open reading frame, orf1; and (3) that cre and orf1 are oriented with their amino-terminal ends proximal to loxP. We have identified three promoters that are located upstream of the cre structural gene. Their activities range from 7 to 10% of the activity of the galactose operon promoter. The promoter furthest from cre, p R1, contains two Dam methylation sites (5′-G-A-T-C-3′) in its −35 region, and is sensitive to Dam methylation. Its transcription is three- to fourfold higher in a dam − host than it is in a dam + host. The promoter closest to cre, p R3, signals the production of an RNA transcript that functions inefficiently for Cre protein synthesis because it lacks a ribosome recognition site. None of the three cre promoters is sensitive to proteins expressed by the P1 prophage, including the c1 repressor protein. To assess the role of cre in the P1 life-cycle, we isolated cre mutants and studied their behavior in recA + and recA − hosts. Those studies indicate that Cre is dispensable for viral vegetative growth and lysogeny in a recA + host, but is required for both processes in a recA − host. The cre requirement for lysogeny suggests that the protein is essential for the cyclization of newly injected terminally redundant virion DNA. The requirement for vegetative growth suggests that Cre also has a role to play in the viral lytic cycle after the viral DNA has been cyclized.

Selection of lambda Spi − transducing phages using the P2 old gene cloned onto a plasmid

The old gene product of the P2 prophage interferes with plaque formation by λ wild type phage but allows λ phages whose red and gam genes have been deleted to form small, visible plaques (the λ Spi − phenotype). The old gene product also kills Escherichia coli recB or recC mutants. We have cloned the old gene into the high-copy-number plasmid pBR322, where it prevents plaque formation by both λSpi + and λASpi − phages. We transferred a DNA fragment that carries the old gene to the low-copy-number plasmid pSClOl and found that λSpi − phages can be selected on strains that carry this plasmid. The plasmid-bome old gene kills E. coli recB mutants, providing a selection for old − mutants.