P-tolyl Sulfoxide Research Articles

DFT and experimental characterization of 1-heteroatom-substituted alkylmagnesium chlorides

In addition to exhibiting nucleophilic reactivity, some alkylmagnesium chlorides that possess a heteroatom substituent at the 1-position can exhibit carbene-like reactivity. Herein, DFT calculations and experiments were performed to study the reactivity of several 1-heteroatom-substituted alkylmagnesium chlorides. The carbene character of 1-heteroatom-substituted 2-methylpropylmagneisum chlorides was evaluated using the geometric parameters in their DFT-optimized structures and the activation energies for the 1,2-hydrogen shift estimated by DFT calculations. 1-Heteroatom-substituted alkylmagnesium chlorides were generated from 1-heteroatom-substituted alkyl p-tolyl sulfoxides and isopropylmagnesium chloride via a sulfoxide/magnesium exchange reaction, and the reactivity of these species was evaluated based on the product ratio. The results revealed that 1-amino- and 1-thioalkylmagnesium chlorides were carbanions because the reaction yielded protonated products. In contrast, 1-haloalkylmagnesium chlorides were magnesium carbenoids because the reaction yielded alkene and cyclopropane without haloalkanes. Lastly, 1-pivaloxyalkylmagnesium chloride was a hybrid between carbanions and magnesium carbenoids. The order of carbene character estimated based on the theoretical results was consistent with the experimental results.

Altering the mobile phase composition to enhance self-disproportionation of enantiomers in achiral chromatography

The influence of mobile phase composition on the efficiency of enantiomer separation by achiral chromatography (ACh) was investigated. The separation was induced by the phenomenon of self-disproportionation of enantiomers (SDE) triggered by their homo and hetero-chiral interactions in an achiral environment. Typically, SDE occurs in apolar mobile phases of weak elution strength, which causes the separation time to extend and the process productivity to deteriorate. To mitigate that effect, we altered the content of a strong solvent (modifier) in the mobile phase by use of a solvent gradient in which the target enantiomer was separated in the presence of the weak solvent, whereas the unresolved mixture of enantiomers was eluted by increasing the modifier content in the mobile phase. This enabled accelerating the solute elution while preserving the separation selectivity. The approach was examined for the separation of nonracemic mixtures of two structurally different compounds that exhibited the SDE effect in ACh, i.e., metalaxyl (MX) and methyl p-tolyl sulfoxide (MTSO). The target compound of the separation was the more abundant enantiomer in the enantiomeric mixture. The process realization was preceded by the determination of the effect of the modifier content on the separation yield for enantiomeric mixtures of MX and MTSO of different enantiomeric excess (ee). In the case of MX, yield of the pure target enantiomer varied from 2 %, for the maximum concentration of the modifier, to 45 % for the minimum modifier concentration and the largest ee used in the experiments. In the case of MTSO, the yield varied from minimum 40 % to maximum 66 %. To predict the process, we employed a dynamic model, in which underlying thermodynamic dependencies were implemented.

Use of 1-chlorovinyl p-tolyl sulfoxides as alkynylmagnesium chloride sources

A method for generating alkynylmagnesium chlorides from 1-chlorovinyl p-tolyl sulfoxides and an isopropylmagnesium chloride–lithium chloride complex (turbo Grignard reagent) has been developed. The method consists of a sulfoxide/magnesium exchange reaction of 1-chlorovinyl p-tolyl sulfoxides and a turbo Grignard reagent, a Fritsch–Buttenberg–Wiechell rearrangement of the resulting magnesium alkylidene carbenoids, and a deprotonation of terminal alkynes with a turbo Grignard reagent. The resulting alkynylmagnesium chlorides are reacted with a variety of electrophiles to generate internal alkynes.

Adsorption and Dissociation of R-Methyl p-Tolyl Sulfoxide on Au(111).

Sulfur-based molecules producing self-assembled monolayers on gold surfaces have long since become relevant functional molecular materials with many applications in biosensing, electronics, and nanotechnology. Among the various sulfur-containing molecules, the possibility to anchor a chiral sulfoxide to a metal surface has been scarcely investigated, despite this class of molecules being of great importance as ligands and catalysts. In this work, (R)-(+)-methyl p-tolyl sulfoxide was deposited on Au(111) and investigated by means of photoelectron spectroscopy and density functional theory calculations. The interaction with Au(111) leads to a partial dissociation of the adsorbate due to S-CH3 bond cleavage. The observed kinetics support the hypotheses that (R)-(+)-methyl p-tolyl sulfoxide adsorbs on Au(111) in two different adsorption arrangements endowed with different adsorption and reaction activation energies. The kinetic parameters related to the adsorption/desorption and reaction of the molecule on the Au(111) surface have been estimated.

Ground-State Photoelectron Circular Dichroism of Methyl p-Tolyl Sulfoxide by Single-Photon Ionisation from a Table-Top Source.

Single-photon ionisation of enantiopure methyl p-tolyl sulfoxide by circularly polarised light at 133 nm shows remarkably strong photoelectron circular dichroism (PECD), which has been measured in a velocity-map-imaging spectrometer. Both enantiomers were measured, each showing a PECD of a similar magnitude (ca. 25 %). These experiments were carried out with a tabletop high-harmonic source with a photon energy of 9.3 eV, capable of ionising the electronic ground state of most organic and inorganic molecules. Ab-initio scattering calculations provide a theoretical value of the expected chiral asymmetry parameter, and agree very well with the measured values once orbital mixing via configuration interaction in the cation is taken into account. This study demonstrates a simple photoionisation scheme that can be readily applied to study the time-resolved PECD of photochemical reactions and suggests a pronounced sensitivity of PECD to electronic configuration interaction in the cation.

Molecular and functional characterization of flavin-containing monooxygenases in pigs, dogs, and cats

Flavin-containing monooxygenases (FMOs) are drug-oxygenating enzymes that are present in the human genome as FMO1-5 and FMO6P. Among pig, dog, and cat FMOs, pig and dog FMO1 and FMO3 have been partly characterized, but other FMOs have not been systematically identified. In this study, orthologous FMO cDNAs were isolated from pig, dog, and cat livers and evaluated by sequence and phylogenetic analyses, tissue expression, and catalytic function. The amino acid sequences of pig, dog, and cat FMO1-5 shared high sequence identities (83–89%) with human FMO1-5 and were closely clustered in a phylogenetic tree. The gene structure and genomic organization of FMO1-5 were conserved across these species. Dog and pig FMO6P contained insertions of 1 and 83 bases, respectively, and are possibly pseudogenes similar to human FMO6P. Among the tissue types analyzed, pig FMO1 mRNA was abundant in liver, kidney, and lung; dog FMO3, FMO2, and FMO5 mRNAs were abundant in liver, lung, and kidney, respectively; cat FMO1 and FMO3 mRNAs were abundant in kidney and liver, respectively. Recombinant pig and dog FMO1-5 and cat FMO1-6 all mediated benzydamine and trimethylamine N-oxygenations and methyl p-tolyl sulfoxide S-oxygenation. The selective human FMO3 substrate trimethylamine was predominantly metabolized by pig FMO1, dog FMO3, and cat FMO3. Cat FMO6 was also active toward trimethylamine. These results suggest some similarities in the drug-metabolizing capabilities of FMO3 in dogs, cats, and humans and that dog and cat FMO3 generally have molecular and functional characteristics similar to human FMO3, being the major FMO in human liver.

Internal dynamics of methyl p-tolyl sulfoxide in the gas phase: Rotational spectroscopy and theoretical studies.

A pure rotational spectrum of methyl p-tolyl sulfoxide (MTSO) was studied using chirped-pulse Fourier transform microwave spectroscopy in the frequency range of 18-26GHz. A single conformer was unambiguously observed in the supersonic jet expansion, which is consistent with the conformational analysis performed using quantum-chemical calculations. Rotational transitions were split into two components of A and E symmetries due to the low-barrier internal rotation of the ring methyl group [V3 = 11.0178(23) cm-1]. The low energy barrier for the methyl top internal rotation implies an electron-withdrawing effect of the group at the opposite side of the phenyl ring, in comparison with other para-substituted toluenes. The effective ground state (r0) geometry was derived using the rotational constants from the parent species and the 34S and eight 13C singly substituted isotopologues. Compared to two other sulfoxides, methyl phenyl sulfoxide and methyl 4-nitrophenyl sulfoxide, the sulfoxide group in MTSO is slightly more twisted with respect to the plane of the phenyl ring, which could be attributed to the moderate electron-donating effect of the p-methyl group. Furthermore, the pyramidal inversion that interconverts the handedness at the sulfur stereogenic center was explored in the electronic ground (S0) and excited (S1) states with nudged elastic band and time-dependent density functional theory methods. It was found that the pyramidal inversion in S1 is easier than in S0, showing that optical excitation to S1 will facilitate an effectively barrier-free inversion.

Total synthesis of ent-pavettamine.

Pavettamine, a plant toxin first isolated from Pavetta harborii in 1995, was previously identified as a polyamine with C2 symmetry and a 1,3-syn-diol moiety on a C10 carbon backbone – one of very few substituted polyamines to be isolated from nature. Its absolute configuration was later established by our first reported total synthesis in 2010. Herein we report the first total synthesis of the enantiomer of pavettamine, ent-pavettamine. The symmetrical structure of the molecule allows for the synthesis of a common C5 fragment that can be divergently transformed into two synthons for later convergent coupling to furnish the target carbon framework. Based on the success of the protocol we employed for the synthesis of the naturally occurring pavettamine, (S)-malic acid was again the starting material of choice for the synthesis of the two individual C5 fragments, with strategic differences in terminal-group manipulation allowing for the synthesis of ent-pavettamine rather than pavettamine. Chain extension and stereoselective ketone reduction were achieved using the (R)-methyl p-tolyl sulfoxide chiral auxiliary to give the desired 1,3-syn-diol C5 unit. A protecting-group strategy was also developed for the orthogonal protection of the alcohol and amine functional groups as they were unveiled. The functionalized C5 fragments were coupled via reductive amination revealing the C10 carbon backbone. Deprotection of the alcohol and amine functional groups successfully provided ent-pavettamine as a TFA salt.

Fritsch-Buttenberg-Wiechell rearrangement of magnesium alkylidene carbenoids leading to the formation of alkynes.

A series of 1-heteroatom-substituted vinyl p-tolyl sulfoxides were prepared and treated with organometallic reagents to evaluate which combination of sulfoxides and organometallic reagents yielded alkynes the most efficiently. The use of 1-chlorovinyl p-tolyl sulfoxide and isopropylmagnesium chloride was optimal for this purpose. A variety of 1-chlorovinyl p-tolyl sulfoxides were prepared from carbonyl compounds and chloromethyl p-tolyl sulfoxide and were converted into alkynes via the sulfoxide/magnesium exchange reaction and subsequent Fritsch–Buttenberg–Wiechell (FBW) rearrangement of the resulting magnesium alkylidene carbenoids. The mechanism of the FBW rearrangement of magnesium alkylidene carbenoids was studied by using 13C-labeled sulfoxides and by using DFT calculations.

Assessment of occupational exposure to gaseous peracetic acid.

In order to assess short-term exposure to peracetic acid (PAA) in disinfection processes, the Authors compared 4 industrial hygiene monitoring methods to evaluate their proficiency in measuring airborne PAA concentrations. An active sampling by basic silica gel impregnated with methyl p-tolyl sulfoxide (MTSO), a passive solid phase micro-extraction technique using methyl p-tolyl sulfide (MTS) as on-fiber derivatization reagent, an electrochemical direct-reading PAA monitor, and a novel visual test strip PAA detector doped with 2,2'-azino-bis (3-ethylbenzothiazoline)-6-sulfonate were evaluated and tested over the range of 0.06-16 mg/m3, using dynamically generated PAA air concentrations. The linear regression analysis of linearity and accuracy showed that the 4 methods were suitable for PAA monitoring. Peracetic acid monitoring in several use applications showed that the PAA concentration (1.8 mg/m3) was immediately dangerous to life or health as proposed by the National Institute of Occupational Safety and Health, and was frequently exceeded in wastewater treatment (up to 7.33 mg/m3), and sometimes during food and beverage processes and hospital high-level disinfection operations (up to 6.8 mg/m3). The methods were suitable for the quick assessment of acute exposure in PAA environmental monitoring and can assist in improving safety and air quality in the workplace where this disinfectant is used. These monitoring methods allowed the evaluation of changes to work out practices to reduce PAA vapor concentrations during the operations when workers are potentially overexposed to this strong antioxidant agent. Int J Occup Med Environ Health 2018;31(4):527-535.

Synthesis and Luminescence Properties of the Binary/Ternary Complex of Samarium Ion with Phenacylmethyl P-Tolyl Sulfoxide and Benzoic Acid

A new ligand phenacylmethyl p-tolyl sulfoxide (denoted as L1) has been synthesized by an asymmetric synthesis method. Its novel binary complex Sm(L1)7·(ClO4)3·6H2O, and ternary complex Sm(L1)6·(L2)·(ClO4)2·6H2O (benzoic acid denoted as L2) have been synthesized. The structure and composition of the samarium complexes characterized by elemental analysis, molar conductivity, IR, UV, and 1HNMR. Additionally, fluorescence spectra measurements shows that the complexes display stronger fluorescence intensity in solid state, indicating the ligands could efficiently transfer the energy to Sm3+ ions in the complexes. The ternary complex has stronger fluorescence intensity than the binary complex.

Synthesis and Luminescence Properties of the Binary/Ternary Complex of Samarium Ion with Phenacylmethyl P-Tolyl Sulfoxide and Benzoic Acid

Synthesis and Luminescence Properties of the Binary/Ternary Complex of Samarium Ion with Phenacylmethyl P-Tolyl Sulfoxide and Benzoic Acid

Consecutive reaction of 1-chlorovinyl p-tolyl sulfoxides with [chloro(p-tolylsulfinyl)methyl]lithium leading to the formation of multi-functionalized methylenecyclopropanes

The reaction of 1-chlorovinyl p-tolyl sulfoxides with excess [chloro(p-tolylsulfinyl)methyl]lithium gave methylenecyclopropanes consisting of a chloro(p-tolylsulfinyl)methylene moiety and a (p-tolylsulfinyl)cyclopropylidene moiety. Treating the methylenecyclopropanes with butyllithium resulted in the formation of conjugated enynes.

Synthesis of 2-azabicyclo[2.1.0]pentanes by the intramolecular nucleophilic substitution of cyclopropylmagnesium carbenoids with magnesium anilide

A variety of 2-azabicyclo[2.1.0]pentanes were synthesized by the intramolecular nucleophilic substitution of cyclopropylmagnesium carbenoids with magnesium anilide. The 1-chlorocyclopropyl p-tolyl sulfoxides possessing an N-aryl-substituted aminomethyl group were prepared from dichloromethyl p-tolyl sulfoxide, α,β-unsaturated carboxylic acid esters, and anilines in four steps. The deprotonation of the amine with t-BuMgCl followed by sulfoxide/magnesium exchange of the sulfoxides with i-PrMgCl led to the generation of the cyclopropylmagnesium carbenoids possessing a magnesium anilide moiety. Subsequent intramolecular nucleophilic substitution of the cyclopropylmagnesium carbenoids occurred in a 4-exo-tet manner to give the 2-azabicyclo[2.1.0]pentanes. The optically active 2-azabicyclo[2.1.0]pentane was synthesized using a p-tolylsulfinyl group as a chiral auxiliary.

Salmonella Typhimurium methionine sulfoxide reductase A (MsrA) prefers TrxA in repairing methionine sulfoxide

ABSTRACTIntraphagocytic survival of Salmonella Typhimurium (ST) depends (at least in part) upon its ability to repair oxidant-damaged macromolecules. Met residues either free or in protein bound form are highly susceptible to phagocyte-generated oxidants. Oxidation of Mets leads to Met-SO formation, consequently loss of protein functions that results in cell death. Methionine sulfoxide reductase (Msr) reductively repairs Met-SO to Met in the presence of thioredoxin (trx) and thioredoxin reductase (trxR). Earlier we reported that methionine sulfoxide reductase A (msrA) gene deletion strain of ST suffered oxidative stress.[1] Thioredoxin system of ST comprises of two thioredoxins (trxA and trxC) and one thioredoxin reductase (trxB). Preferred trx utilized in MsrA-mediated repair of Met-SO is not known. In current study, we cloned, expressed, and purified ST TrxA, TrxB, TrxC, and MsrA in recombinant forms. The migration of TrxA, TrxB, TrxC, and MsrA proteins was approximately 10, 36, 16, and 26 kDa on SDS-gels. The nicotinamide adenine dinucleotide phosphate hydrogen (NADPH)-linked reductase assays interpreted that MsrA utilized two times more NADPH for the reduction of S-methyl p-tolyl sulfoxide when TrxA was included in the assays as compared to TrxC.

(Diphenoxyphosphoryl)methyl p-tolyl sulfoxide: A new reagent for Z-selective synthesis of racemic and optically active vinyl sulfoxides

GRAPHICAL ABSTRACT

Relation between phase composition and photocatalytic activity of TiO2 in a sulfoxide deoxygenation reaction

In the present study we synthesize three TiO2 samples, TiO2-500, TiO2-750 and TiO2-850, by a sol–gel procedure varying the rutile and anatase content by calcination at different temperatures. Characterization by XRD, NIR-Raman, UV-Raman, BET, DR-UV-Vis spectroscopy and SEM points out that TiO2-500 consists mainly of anatase and TiO2-850 of rutile. TiO2-700 presents both phases on the surface that is the part of the photocatalyst interested by UV illumination. The photocatalysts are tested in the deoxygenation reaction of methyl p-tolyl sulfoxide to the corresponding sulfide using 2-propanol as hole scavenger. It is demonstrated that the presence of both anatase and rutile on the surface of TiO2-700 is responsible of the increase of the photocatalytic activity. This is likely due to a more efficient charge separation process that increases lifetime of the charges giving availability of electrons and holes for the photocatalytic reaction. Methyl p-tolyl sulfide is formed with a selectivity of 100%.

Synthesis of 3-azabicyclo[3.1.0]hexanes by insertion of cyclopropylmagnesium carbenoids into an intramolecular C–H bond adjacent to a nitrogen atom

A variety of 3-azabicylo[3.1.0]hexanes were synthesized via 1,5-C–H insertion of cyclopropylmagnesium carbenoids as a key step. 1-Chlorocyclopropyl p-tolyl sulfoxides with an N,N-disubstituted aminomethyl group on the cyclopropane ring were prepared from dichloromethyl p-tolyl sulfoxide, α,β-unsaturated carboxylic acid esters, primary amines, and alkyl halides. Treatment of the sulfoxides with i-PrMgCl generated cyclopropylmagnesium carbenoids, which were inserted into an intramolecular C–H bond adjacent to a nitrogen atom to give 3-azabicyclo[3.1.0]hexanes in yields of up to 94%. The reactivity of the C–H bond toward the insertion increased in the order of NCH3, NCH2CH3, NCH2Ph, and NCH(CH3)2. Optically active 3-azabicyclo[3.1.0]hexane was successfully synthesized using an S-chiral p-tolylsulfinyl group as a chiral auxiliary.

Syntheses and luminescence properties of two novel lanthanide (III) perchlorate complexes with phenacyl p-tolyl sulfoxide

Two novel solid binary complexes of rare earth perchlorate with phenacyl p-tolyl sulfoxide were synthesized and characterized by elemental analysis, molar conductivity, coordination titration analysis, IR, TG-DSC, 1HNMR and UV spectra. The results indicated that the composition of these complexes was REL7 (ClO4)3·6H2O (RE=Eu (III), Tb (III), L=C6H5COCH2SOC6H4CH3). The study on IR spectra and 1HNMR spectra revealed that phenacyl p-tolyl sulfoxide bonded with RE3+ ions by the oxygen atom in sulfinyl group. The emission spectra illustrated that both the Eu (III) and Tb (III) complexes displayed excellent luminescence in solid state, and The most intensive characteristic emission of the Eu(III) and Tb(III) complexes were 245,400a.u. and 298,000a.u. respectively. The slit with was 1nm. By analysis luminescence and phosphorescence spectrum, it was found that the ligand had the advantage to absorb energy and transfer it to the Eu (III) and Tb (III) ions. The fluorescence lifetimes of the complexes were measured as well as the quantum yield of the Eu (III) complex.

Electrochemically mediated enantioselective reduction of chiral sulfoxides.

The respiratory DMSO reductase from Rhodobacter capsulatus catalyzes the reduction of dimethyl sulfoxide to dimethyl sulfide. Herein, we have utilized this Mo enzyme as an enantioselective catalyst to generate optically pure sulfoxides (methyl p-tolyl sulfoxide, methyl phenyl sulfoxide and phenyl vinyl sulfoxide) from racemic starting materials. A hexaaminecobalt coordination compound in its divalent oxidation state was employed as the mediator of electron transfer between the working electrode and DMSO reductase to continually reactivate the enzyme after turnover. In all cases, chiral HPLC analysis of the reaction mixture revealed that the S-sulfoxide was reduced more rapidly leading to enrichment or isolation of the R isomer.