Oxygen Evolution Reaction Activity Research Articles

Valence Band-Tunable NiFe Electrocatalyst Triggered by the Dynamic Mo Exudation and Re-Deposition for Superior High Current Density Oxygen Evolution Reaction.

Developing energy- and time-efficient strategies to derive high-performance non-precious electrocatalysts for anodic oxygen evolution reaction (OER), especially stably working at industrial-demanding current density, is still a big challenge. In this work, a concise molten salt erosion scenario was devised to rapidly modulate the smooth surface of the commercial NiMo foam substrate into the rough, electronically coupled, and hierarchically porous Ni/Fe/Mo(oxy)hydroxide catalyst layer assembled by the nanosphere array. This self-supported catalyst is super-hydrophilic for the alkaline electrolyte and distinguished by a balanced Mo leaching/surface-readsorption process to tune the metal d band center and electronic perturbation. The altered electronic environment with the favored OER intermediate adsorption behavior attains the outstanding OER activity in terms of a very small overpotential of 230.21 mV at 10 mA cm-2 and an ultra-long stability for 1179.45 h to sustain the initial commercial-level current density of ca. 1000 mA cm-2. This superb performance transcends most of the edge-cutting transition metal peers reported recently and can satisfy the standards of industrial applications. This industrial-compatible synthesis technology holds profound implications for hydrogen production via water splitting and other electrochemical applications.

Oxyanion Engineering on RuO2 for Efficient Proton Exchange Membrane Water Electrolysis.

In acidic proton exchange membrane water electrolysis (PEMWE), the anode oxygen evolution reaction (OER) catalysts rely heavily on the expensive and scarce iridium-based materials. Ruthenium dioxide (RuO2) with lower price and higher OER activity, has been explored for the similar task, but has been restricted by the poor stability. Herein, we developed an anion modification strategy to improve the OER performance of RuO2 in acidic media. The designed multicomponent catalyst based on sulfate anchored on RuO2/MoO3 displays a low overpotential of 190 mV at 10 mA cm-2 and stably operates for 500 hours with a very low degradation rate of 20 μV h-1 in acidic electrolyte. When assembled in a PEMWE cell, this catalyst as an anode shows an excellent stability at 500 mA cm-2 for 150 h. Experimental and theoretical results revealed that MoO3 could stabilize sulfate anion on RuO2 surface to suppress its leaching during OER. Such MoO3-anchored sulfate not only reduces the formation energy of *OOH intermediate on RuO2, but also impedes both the surface Ru and lattice oxygen loss, thereby achieving the high OER activity and exceptional durability.

Oxyanion Engineering on RuO2 for Efficient Proton Exchange Membrane Water Electrolysis

AbstractIn acidic proton exchange membrane water electrolysis (PEMWE), the anode oxygen evolution reaction (OER) catalysts rely heavily on the expensive and scarce iridium‐based materials. Ruthenium dioxide (RuO2) with lower price and higher OER activity, has been explored for the similar task, but has been restricted by the poor stability. Herein, we developed an anion modification strategy to improve the OER performance of RuO2 in acidic media. The designed multicomponent catalyst based on sulfate anchored on RuO2/MoO3 displays a low overpotential of 190 mV at 10 mA cm−2 and stably operates for 500 hours with a very low degradation rate of 20 μV h−1 in acidic electrolyte. When assembled in a PEMWE cell, this catalyst as an anode shows an excellent stability at 500 mA cm−2 for 150 h. Experimental and theoretical results revealed that MoO3 could stabilize sulfate anion on RuO2 surface to suppress its leaching during OER. Such MoO3‐anchored sulfate not only reduces the formation energy of *OOH intermediate on RuO2, but also impedes both the surface Ru and lattice oxygen loss, thereby achieving the high OER activity and exceptional durability.

Synergistic Effect of Cobalt/Ferrocene as a Catalyst for the Oxygen Evolution Reaction.

There is a great deal of interest in the development of electrocatalysts for the oxygen evolution reaction (OER) that are stable and have high activity because this anodic half-reaction is the main bottleneck in water splitting and other key technologies. Cobalt and iron oxide and oxyhydroxide electrocatalysts constitute a cheaper alternative to the highly active and commonly used Ir- and Ru-based catalysts. Most of the described electrocatalysts require tedious synthetic and expensive preparation procedures. We report here a facile and straightforward preparation of an electrocatalyst by a combination of commercial compounds, such as cobalt chloride and ferrocene. A highly active and stable OER electrocatalyst is obtained, which shows a low overpotential in the alkaline medium as a consequence of a synergistic effect between both compounds and is inexpensive.

Highly enhanced electrocatalytic OER with facile electrodeposition of MIL–53(Fe)/NiAl–LDH/NF and NiAl–LDH/MIL–53(Fe)/NF

This research investigates a new approach to improve the electrocatalytic rate of the Oxygen Evolution Reaction (OER), a key step in water electrolysis. The study focuses on two promising materials: MIL–53(Fe) and NiAl–LDH. MIL–53(Fe) offers several advantages: high catalytic activity, large surface area, and good chemical stability. NiAl–LDH is attractive due to its layered structure, tolerance to a wide range of pH levels, scalability, and cost-effectiveness. However, their limitations like low conductivity and restricted accessibility of active sites hinder their performance in water splitting applications. To address these limitations, novel composite thin films were created using a technique called layer–by–layer (LBL) electrophoretic deposition. These films, built on nickel foam (NF) substrates, included two configurations: MIL–53(Fe)/NiAl–LDH/NF and NiAl–LDH/MIL–53(Fe)/NF. The MIL-53(Fe)/NiAl-LDH/NF composite exhibited remarkable OER activity in alkaline electrolytes, requiring overpotentials of only 200, 270, and 370 mV to reach current densities of 20, 50, and 100 mA cm−2, respectively. The Tafel slope of 54.86 mVdec−1 suggests rapid reaction kinetics. Additionally, it demonstrated excellent long-term stability, lasting for at least 20 h. The success of the MIL–53(Fe)/NiAl–LDH/NF composite can be attributed to the LBL technique. This method creates a composite with a larger surface area, significantly improving OER efficiency. In contrast, the MIL–53(Fe)/NiAl–LDH/NF configuration had the opposite effect. The NF pores became blocked by the MIL–53(Fe) layer, reducing the overall surface area, hindering electron transfer, and thereby limiting oxygen production. The LBL deposition method used in this study proves its effectiveness in designing efficient electrocatalysts. This opens up possibilities for creating other multicomponent materials for energy applications. The findings provide valuable insights for future research on these promising composite materials, potentially leading to the development of cost-effective and high-performance catalysts for various electrochemical applications.

Nanostructured Fe-Doped Ni3S2 Electrocatalyst for the Oxygen Evolution Reaction with High Stability at an Industrially-Relevant Current Density.

A novel oxygen evolution reaction (OER) electrocatalyst was prepared by a synthesis strategy consisting of the solvothermal growth of Ni3S2 nanostructures on Ni foam, followed by hydrothermal incorporation of Fe species (Fe-Ni3S2/Ni foam). This electrocatalyst displayed a low OER overpotential of 230 mV at 100 mA·cm-2, a low Tafel slope of 43 mV·dec-1, and constant performance at an industrially relevant current density (500 mA·cm-2) over 100 h in a 1.0 M KOH electrolyte, despite a minor loss of Fe in the process. Based on a detailed characterization by (in situ) Raman spectroscopy, (quasi-in situ) XPS, SEM, TEM, XRD, ICP-AES, EIS, and Cdl analysis, the high OER activity and stability of Fe-Ni3S2/Ni foam were attributed to the nanostructuring of the surface in the form of stable nanosheets and to the combination of Ni3S2 granting suitable electrical conductivity with newly formed NiFe-based (oxy)hydroxides at the surface of the material providing the active sites for OER.

Dynamic Micelle-Hydrogels for 3D-Architected Transition Metal Sulfides.

Additive manufacturing of transition metal sulfides (TMS) enables the creation of complex 3D structures, significantly expanding their applications. However, preparing 3D-structured TMS remains challenging due to difficulties in developing suitable inks. In this study, a supramolecular micelle hydrogel as the ink to fabricate 3D-structured TMS is utilized. Initially, the hydrogels are printed and infused with metal salt solutions to stabilize the structures, which are then calcined to convert into miniaturized 3D-TMS replicas. The micellar hydrogels crosslink via hydrophobic interactions, with sodium dodecyl sulfonate (SDS) micelles providing both a hydrophobic environment and sulfur sources. During calcination, the decomposed sulfur precursors coordinate with metal ions to form various TMS, including FeS2, Cu2S, Ni3S2, and Co9S8, along with several metal sulfides like PbS and SnS. Additionally, the method also allows for the preparation of transition metal dichalcogenides such as MoS2 and WS2. The formation mechanism is demonstrated using Ni3S2 as an example which exhibits notable catalytic activity in oxygen evolution reactions (OER) and hydrogen evolution reactions (HER). Given its simplicity and versatility, this dynamic micellar hydrogel-derived strategy offers a promising pathway for creating advanced TMS materials.

High-Entropy Selenides with Tunable Lattice Distortion as Efficient Electrocatalysts for Oxygen Evolution Reaction.

Developing stable and active electrocatalysts is crucial for enhancing the oxygen evolution reaction (OER) efficiency, which sluggish kinetics hinders sustainable hydrogen production. High entropy selenides (HESes) features with random distribution of multiple metals cations and unique electronic and size effect of Se anion, allowing for precious regulation of their catalytic properties towards high OER activity. In this work, we report a series of high-entropy selenides catalysts with tunable lattice strain for electrocatalytic oxygen evolution. Electrochemical measurements show that the quinary (NiCoMnMoFe)Sex requires only 291 mV to reach 10 mA cm-2 and exhibits a superior stability with negligible current decay during 100 h's continuous operation. By combining experimental measurements and theoretical calculation, the study reveals that the lattice distortion, reflected by the local microstrain near the active site, plays a vital role in boosting the OER activity of HESes.

Enhanced electrocatalytic OER activity following electrochemical pre-cathodic treatment of Mn-substituted nickel ferrite

In this study, the electronic engineering of a high-valent active site for enhanced oxygen evolution reaction (OER) was achieved through the electrochemical pre-cathodic treatment method (EPCTM). This method involves applying a cathodic potential to the drop-cast working electrode of Mn-substituted nickel ferrite (Ni1−xMnxFe2O4; where x = 0.0, 0.2, and 0.4) electrocatalysts. X-ray photoelectron spectroscopy analysis revealed an increase in the ratios of Ni3+/Ni2+ and Mn3+/Mn2+ in Ni1−xMnxFe2O4 after EPCTM followed by OER, leading to an enhancement in electrochemical OER current density at 600 mV overpotential by 3.65 times for x = 0.0, 5.56 times for x = 0.20, and 4.72 times for x = 0.40. This enhancement was further supported by a decrease in the slope of the anodic Tafel equation after EPCTM, indicating improved efficiency of the interaction between the working electrode and electrolyte, as a lower Tafel slope suggests better charge exchange at the electrode–electrolyte interface. The positive slope in the Mott–Schottky (MS) plot for all Ni1−xMnxFe2O4 samples confirmed the p-type nature of the electrocatalysts. Additionally, the significant decrease in the slope of the linear portion of the MS plot indicated an increase in carrier concentration after electrochemical pre-cathodic treatment in all Ni1−xMnxFe2O4 samples. This increase in p-type carrier concentration supports the observed increase in the Ni3+/Ni2+ ratio for OER after EPCTM.

Cutting-Edge PCN-ZnO Nanocomposites with Experimental and DFT Insights into Enhanced Hydrogen Evolution Reaction.

Polymeric carbon nitride (PCN) and PCN-ZnO nanocomposites are promising candidates for catalysis, particularly for hydrogen evolution reactions (HER). However, their catalytic efficiency requires enhancement to fully realize their potential. This study aims to improve the HER performance of PCN by synthesizing PCN-ZnO nanocomposites using melamine as a precursor. Two synthesis methods were employed: thermal condensation (Method 1) and liquid exfoliation (Method 2). Method 1 resulted in a composite with a 2.44 eV energy gap and reduced particle size, with significantly enhanced performance as a bifunctional electrocatalyst for simultaneous hydrogen and oxygen production. In contrast, Method 2 produced a nanocomposite with an enhanced surface area and a minor alteration in the band gap. In alkaline electrolytes, the PCN-ZnO0.4 nanocomposite synthesized with Method 1 exhibited high HER performance with an overpotential of 281 mV, outperforming pristine PCN (382 mV) and ZnO (302 mV), along with improved oxygen evolution reaction (OER) activity. Further analysis in a two-electrode alkaline electrolyzer using PCN-ZnO0.4 nanocomposite as both the anode and cathode demonstrated its promise as a bifunctional electrocatalyst. Density functional theory (DFT) calculations explained the enhanced catalytic activity of the PCN-ZnO nanocomposite, confirming that hydrogen evolution occurs through the Heyrovsky process, consistent with experimental results. Notably, the solar-to-hydrogen (STH) efficiency of the PCN-ZnO nanocomposite was four times greater, at 21.7% compared to 5.2% for the PCN monolayer, underscoring its potential for efficient solar-driven hydrogen production. This work paves the way for future advancements in the design of high-performance electrocatalysts for sustainable energy applications.

Trace Amount of Ir Decorated NiFe Phosphide In-Situ Grown on Carbon Cloth as Cost-Effective Electrocatalyst for Oxygen Evolution Reaction.

Cost-effective electrocatalysts is a key constituent to establish the balance of cost and catalytic efficiency for oxygen evolution reaction (OER) via water electrolysis in the area of energy conversion and storage. NiFe phosphide decorated with trace amount of iridium (Ir) species in-situ grown on carbon cloth was prepared by a facile wet chemistry approach followed by a phosphorization post-treatment at a relative low temperature. The optimal electrocatalyst, Ir2-NiFePx/CC, exhibits excellent OER activity, with an low overpotential of 190 mV at 10 mA cm-2 for alkaline OER, and a desirable long-term durability over 90 h. The outstanding OER performance stems from the structural evolution via phosphorization process, Ir decoration with more high-valence stated Ir4+ species, and tight connection between individual components of the electrode, which gives rise to the strong activity to the active sites and faster reaction kinetics in the alkaline OER process. Mover, the Ir loading was as low as approximately ~1.7 wt % (0.29 mg cm-2), showing promissing propective in cost-effective OER.

Oxidative reconstructed Ru-based nanoclusters forming heterostructures with lanthanide oxides for acidic water oxidation

Achieving rapid anodic oxygen evolution reaction (OER) kinetics and improving the stability of the corresponding ruthenium (Ru)-based catalysts is a current priority for the realisation of industrial water splitting. However, the activity and stability of O2 evolution in electrocatalysis are largely inhibited by the insufficient adsorption of the reactant H2O and too strong adsorption of the intermediate OOH*, as well as by the dissolution of the active site due to excessive oxidation. To solve this challenge, herein, we developed a regulatory strategy combining lanthanide oxides and metal oxidative reconfiguration. The introduction of Eu2O3 effectively promotes the adsorption of H2O, optimizes the adsorption energy of OOH*, and reduces the reaction energy barrier of acidic OER process. And the metal oxidation remodeling process exposed more active sites and prevented the peroxidation process. The optimized Ru/Eu2O3@CNT catalyst showed the highest catalytic activity and stability in acidic OER. Its mass activity was 1219.1 A gRu−1 and the TOF value reached 4.4 s−1 at 1.48 V. Additionally, Ru/Eu2O3@CNT after oxidative reconstruction demonstrates the industrially needed current density of 1.0 A cm−2 at 1.71 V in PEM electrolyser, achieving stability in excess of 200 h.

Defect-Driven Evolution of Oxo-Coordinated Cobalt Active Sites with Rapid Structural Transformation for Efficient Water Oxidation.

Reconstructing the surface nature of metal-organic frameworks (MOFs) as precatalytic structures is a promising methodology for improving electrocatalytic performance. However, regulating the structural evolution of MOFs during electrolysis remains highly uncontrollable and lacks an in-depth understanding of the role of in situ-derived active sites. Here, we suggest a simple approach to fine-tune the symmetry of Co-MOFs with an oxo-coordinated asymmetric coordination that acts as a prototypical structure motif for the oxygen evolution reaction (OER). Through a facile thermal treatment, the Co-N4 configuration of Co-MOFs transforms to the distorted Co-N3-oxo configuration of defective Co-ligand nanoclusters. By operando spectroscopic characterization, the reconstructed Co-N3-oxo structure enables a rapid structural transition toward homogeneous oxyhydroxides. Moreover, the defective nature of the precatalytic structure regulates the surface Co-O bonding environment with abundant μ2-O-Co3+ sites, thereby exhibiting highly enhanced OER activity with an overpotential of 256 mV at 10 mA cm-2 and excellent durability for 100 h, compared with the pristine Co-MOFs. Atomistic simulations reveal that the effect of OER intermediates on the oxyhydroxides gets distributed among neighboring Co ions, promoting balanced binding of the intermediates. This work highlights an effective strategy to design the MOF-based structure for optimizing the surface nature, thus enhancing the electrocatalytic activity.

Stabilization of High-Valent Molecular Cobalt Sites through Oxidized Phosphorus in Reduced Graphene Oxide for Enhanced Oxygen Evolution Catalysis.

Heterogeneous molecular cobalt (Co) sites represent one type of classical catalytic sites for electrochemical oxygen evolution reaction (OER) in alkaline solutions. There are dynamic equilibriums between Co2+, Co3+ and Co4+ states coupling with OH-/H+ interaction before and during the OER event. Since the emergence of Co2+ sites is detrimental to the OER cycle, the stabilization of high-valent Co sites to shift away from the equilibrium becomes critical and is proposed as a new strategy to enhance OER. Herein, phosphorus (P) atoms were doped into reduced graphene oxide to link molecular Co2+ acetylacetonate toward synthesizing a novel heterogeneous molecular catalyst. By increasing the oxidation states of P heteroatoms, the linked Co sites were spontaneously oxidized from 2+ to 3+ states in a KOH solution through OH- ions coupling at an open circuit condition. With excluding the Co2+ sites, the as-derived Co sites with 3+ initial states exhibited intrinsically high OER activity, validating the effectiveness of the strategy of stabilizing high valence Co sites.

Exploring the Effect of Ball Milling on the Physicochemical Properties and Oxygen Evolution Reaction Activity of Nickel and Cobalt Oxides

Ball milling is commonly used to reduce catalyst particle size. However, little attention is paid to further changes that ball milling can cause to the rest of the catalysts’ physicochemical properties, which can impact their intrinsic catalytic activity. The effect of ball milling on the physicochemical properties of NiCoO2, NiO, CoO, and NiO:CoO mixtures is reported and correlated with their electrochemical oxygen evolution reaction (OER) activity. It is also shown that particle fragmentation is an inherent consequence of ball milling, but some oxides can also experience a phase transformation. In the case of rocksalt‐structured CoO, it is partially or entirely transformed to spinel‐structured Co3O4. Additionally, NiCo2O4 with a spinel structure can be formed by ball milling NiO and CoO simultaneously (both rocksalt structures), but only in the absence of water. The changes impact the electrochemical activity of the initial oxides. Ball milled NiCoO2 exhibits the highest activity with a mean potential of 1.563 V at 10 mA cm−2, demonstrating the advantage of having Ni and Co in the same structure. Although NiCo2O4 is also a binary oxide, the results indicate that its metal coordination environment makes it intrinsically less active than NiCoO2 for the OER in alkaline media.

Ce-doped NiCo-layered double hydroxide based self-supporting tremella-shaped nanoflower heterostructure as efficient electrocatalyst for the oxygen evolution reaction

NiCo-layered double hydroxide (NiCo-LDH) catalysts, which indicate a profound prospect of oxygen evolution reaction (OER) under alkaline conditions, are facing great challenges in terms of low electrical conductivity, restricted by poor conductivity, limited electrochemical reaction sites, and low-density of edge sites. The authors developed a simple and convenient in-situ one-pot self-assembly method. The Ce-doped defective NiCo-LDH hexagonal nanosheets and nitrogen-doped graphene fabricated the NiCoCe-LDH/RNF electrocatalyst on the nickel foam (NF) substrate, which demonstrated excellent OER activity under alkaline conditions, only needed 299 mV overvoltage to achieve 50 mA cm−2 current intensity, could last for 6 hours at 20 mA cm−2. The highly active OER benefited from the structural advantages of the novelty three-dimensional array structure. The novel geometric structure of tremella-shaped nanoflower integrated with curved nanosheets and curled edges loaded on NF provides more electrochemical reaction sites for intermediate coordination. The nitrogen-doped reduced graphene oxide accommodated better interaction between active materials and charge carriers, enhancing the conductivity and electron transfer performance of nanostructures. The effective synergistic between the heterostructures promoted the excellent OER electrocatalytic activity of NiFeCe-LDH/RNF nanocomposites. DFT calculations at the atomic level of pristine and Ce-doped NiCo-LDH exhibited that Ce-doping can reduce the Gibbs free energy of the potential-determining step and improve the catalytic activity of OER. This work has broadened the horizons for developing simple and highly available OER electrocatalysts.

Importing Atomic Rare‐Earth Sites to Activate Lattice Oxygen of Spinel Oxides for Electrocatalytic Oxygen Evolution

Spinel oxides have emerged as highly active catalysts for the oxygen evolution reaction (OER). However, due to covalency competition, the OER process on spinel oxides often follows an arduous adsorbate evolution mechanism (AEM) pathway. Herein, we propose a novel rare‐earth sites substitution strategy to tune the lattice oxygen redox of spinel oxides and bypass the AEM scaling relationship limitation. Taking NiCo2O4 as a model, the incorporation of Ce into the octahedral site induces the formation of Ce‐O‐M (M: Ni, Co) bridge, which triggers charge redistribution in NiCo2O4. The developed Ce‐NiCo2O4 exhibits remarkable OER activity with a low overpotential, satisfactory electrochemical stability, and good practicability in anion‐exchange membrane water electrolyzer. Theoretical analyses reveal that OER on Ce‐NiCo2O4 surface follows a more favorable lattice oxygen mechanism (LOM) pathway and non‐concerted proton‐electron transfers compared to pure NiCo2O4, as further verified by pH‐dependent behavior and in situ Raman analysis. 18O‐labeled electrochemical mass spectrometry directly demonstrates that oxygen originates from the lattice oxygen of Ce‐NiCo2O4 during OER. It is discovered that electron delocalization of Ce 4f states triggers charge redistribution in NiCo2O4 through the Ce‐O‐M bridge, favoring antibonding state occupation of Ni‐O bonding in [Ce‐O‐Ni] site, thereby activating lattice oxygen redox of NiCo2O4 in OER.

Importing Atomic Rare-Earth Sites to Activate Lattice Oxygen of Spinel Oxides for Electrocatalytic Oxygen Evolution.

Spinel oxides have emerged as highly active catalysts for the oxygen evolution reaction (OER). However, due to covalency competition, the OER process on spinel oxides often follows an arduous adsorbate evolution mechanism (AEM) pathway. Herein, we propose a novel rare-earth sites substitution strategy to tune the lattice oxygen redox of spinel oxides and bypass the AEM scaling relationship limitation. Taking NiCo2O4 as a model, the incorporation of Ce into the octahedral site induces the formation of Ce-O-M (M: Ni, Co) bridge, which triggers charge redistribution in NiCo2O4. The developed Ce-NiCo2O4 exhibits remarkable OER activity with a low overpotential, satisfactory electrochemical stability, and good practicability in anion-exchange membrane water electrolyzer. Theoretical analyses reveal that OER on Ce-NiCo2O4 surface follows a more favorable lattice oxygen mechanism (LOM) pathway and non-concerted proton-electron transfers compared to pure NiCo2O4, as further verified by pH-dependent behavior and in situ Raman analysis.18O-labeled electrochemical mass spectrometry directly demonstrates that oxygen originates from the lattice oxygen of Ce-NiCo2O4 during OER. It is discovered that electron delocalization of Ce 4f states triggers charge redistribution in NiCo2O4 through the Ce-O-M bridge, favoring antibonding state occupation of Ni-O bonding in [Ce-O-Ni] site, thereby activating lattice oxygen redox of NiCo2O4 in OER.

Cr-doped tri-metallic nano prism catalyst for efficient alkaline and seawater splitting

Electrochemical water splitting is one of the most promising methods for sustainable production of green hydrogen. The oxygen evolution reaction (OER) is a crucial step in the process of water splitting. However, it exhibits sluggish kinetics and requires a significant overpotential for functioning at reasonable reactionrates. The efficiency of the reaction can be enhanced by reducing the overpotential, lowering the energy barrier, and using an effective electrocatalyst. Transition metal-basedcatalysts are well studied for this purpose. Specially, nickel–cobalt (Ni-Co) based catalysts have been regarded as the best OER electrocatalysts. Therefore, several studies have been carried out to enhance the electrocatalytic efficiency of Ni-Co catalysts. While mixing other transition metals with Ni-Co is a straightforward and reliable method to improve the OER activity of Ni-Co catalysts, there is still a need for a thorough examination of the design of Ni-Co catalysts with various additional elements. Seawater electrolysis, which utilizes abundant water resources that constitute over 97% of the world’s water, is highly appealing for sustainable energy production. To achieve commercial feasibility, scientists are striving to solve challenges, such as corrosion resistance, highoverpotential, and the need for efficient and durable electrocatalysts.In this study, we fabricated a transition metal-based trimetallic catalyst (CNF), consisting of cobalt (Co), nickel (Ni), and iron (Fe). Furthermore, CNF was doped with chromium (Cr-doped CNF) and tested for the OER in alkaline freshwater and alkaline seawater. Our Cr-doped trimetallic CNF catalyst demonstrates exceptional performance in both seawater and freshwater, with overpotential of 320 mV and 280 mV at 10 mA cm−2 current density, making it a promising candidate for large-scale, sustainable hydrogen production.

Smart utilization of bimetallic NiCo alloy supported carbon dots and sulfur quantum dots derived 3D nanocomposite for oxygen evolution reaction

The increasing demand for highly active and stable electrocatalysts for the oxygen evolution reaction (OER) in future energy-conversion systems has driven researchers to explore novel alternatives to Pt-based catalysts. Among these alternatives, zero-dimensional quantum dots have emerged as promising candidates due to their high surface area and intrinsic electrocatalytic activity, which lead to significant breakthroughs in electrocatalytic performance. Herein, we conducted a preliminary investigation into the application of bimetallic NiCo alloy deposited on metal-free quantum dots (carbon dots and sulfur quantum dots) derived nano sponge for the oxygen evolution reaction. The synthesized NiCo-CDs-800 exhibited remarkable electrocatalytic OER activity, achieving a current density of 10 mA cm−2 with only 221 mV overpotential, far surpassing commercial RuO2 electrocatalysts. The excellent electrocatalytic activity can be attributed primarily to high electrochemically active area (168.97 mF cm−2), the presence of large proportion of oxygen vacancies (68.61 %), rich pyridinic nitrogen structure (29.30 %) with strong water adsorption, and synergistic effect of bimetals as supported by density functional theory calculations. Meanwhile, the newly prepared NiCo-SQDs-700 under the similar procedure demonstrate a satisfied OER performance and competing stability when compared to NiCo-CDs. These findings open a new avenue for the application of metal free CDs and SQDs to the growing family of metal@QDs.